arch/ppc/Kconfig

   1 # For a description of the syntax of this configuration file,
   2 # see Documentation/kbuild/kconfig-language.txt.
   3 #
   4
   5 mainmenu "Linux/PowerPC Kernel Configuration"
   6
   7 config MMU
   8         bool
   9         default y
  10
  11 config GENERIC_HARDIRQS
  12         bool
  13         default y
  14
  15 config RWSEM_GENERIC_SPINLOCK
  16         bool
  17
  18 config RWSEM_XCHGADD_ALGORITHM
  19         bool
  20         default y
  21
  22 config GENERIC_CALIBRATE_DELAY
  23         bool
  24         default y
  25
  26 config PPC
  27         bool
  28         default y
  29
  30 config PPC32
  31         bool
  32         default y
  33
  34 # All PPCs use generic nvram driver through ppc_md
  35 config GENERIC_NVRAM
  36         bool
  37         default y
  38
  39 config SCHED_NO_NO_OMIT_FRAME_POINTER
  40         bool
  41         default y
  42
  43 config ARCH_MAY_HAVE_PC_FDC
  44         bool
  45         default y
  46
  47 source "init/Kconfig"
  48
  49 menu "Processor"
  50
  51 choice
  52         prompt "Processor Type"
  53         default 6xx
  54
  55 config 6xx
  56         bool "6xx/7xx/74xx/52xx/82xx/83xx"
  57         select PPC_FPU
  58         help
  59           There are four types of PowerPC chips supported.  The more common
  60           types (601, 603, 604, 740, 750, 7400), the Motorola embedded
  61           versions (821, 823, 850, 855, 860, 52xx, 82xx, 83xx), the IBM embedded
  62           versions (403 and 405) and the high end 64 bit Power processors
  63           (POWER 3, POWER4, and IBM 970 also known as G5)
  64           Unless you are building a kernel for one of the embedded processor
  65           systems, 64 bit IBM RS/6000 or an Apple G5, choose 6xx.
  66           Note that the kernel runs in 32-bit mode even on 64-bit chips.
  67           Also note that because the 52xx, 82xx, & 83xx family has a 603e core,
  68           specific support for that chipset is asked later on.
  69
  70 config 40x
  71         bool "40x"
  72
  73 config 44x
  74         bool "44x"
  75
  76 config POWER3
  77         select PPC_FPU
  78         bool "POWER3"
  79
  80 config POWER4
  81         select PPC_FPU
  82         bool "POWER4 and 970 (G5)"
  83
  84 config 8xx
  85         bool "8xx"
  86
  87 config E200
  88         bool "e200"
  89
  90 config E500
  91         bool "e500"
  92
  93 endchoice
  94
  95 config PPC_FPU
  96         bool
  97
  98 config BOOKE
  99         bool
 100         depends on E200 || E500
 101         default y
 102
 103 config FSL_BOOKE
 104         bool
 105         depends on E200 || E500
 106         default y
 107
 108 config PTE_64BIT
 109         bool
 110         depends on 44x || E500
 111         default y if 44x
 112         default y if E500 && PHYS_64BIT
 113
 114 config PHYS_64BIT
 115         bool 'Large physical address support' if E500
 116         depends on 44x || E500
 117         default y if 44x
 118         ---help---
 119           This option enables kernel support for larger than 32-bit physical
 120           addresses.  This features is not be available on all e500 cores.
 121
 122           If in doubt, say N here.
 123
 124 config ALTIVEC
 125         bool "AltiVec Support"
 126         depends on 6xx || POWER4
 127         depends on !8260 && !83xx
 128         ---help---
 129           This option enables kernel support for the Altivec extensions to the
 130           PowerPC processor. The kernel currently supports saving and restoring
 131           altivec registers, and turning on the 'altivec enable' bit so user
 132           processes can execute altivec instructions.
 133
 134           This option is only usefully if you have a processor that supports
 135           altivec (G4, otherwise known as 74xx series), but does not have
 136           any affect on a non-altivec cpu (it does, however add code to the
 137           kernel).
 138
 139           If in doubt, say Y here.
 140
 141 config SPE
 142         bool "SPE Support"
 143         depends on E200 || E500
 144         ---help---
 145           This option enables kernel support for the Signal Processing
 146           Extensions (SPE) to the PowerPC processor. The kernel currently
 147           supports saving and restoring SPE registers, and turning on the
 148           'spe enable' bit so user processes can execute SPE instructions.
 149
 150           This option is only useful if you have a processor that supports
 151           SPE (e500, otherwise known as 85xx series), but does not have any
 152           effect on a non-spe cpu (it does, however add code to the kernel).
 153
 154           If in doubt, say Y here.
 155
 156 config TAU
 157         bool "Thermal Management Support"
 158         depends on 6xx && !8260 && !83xx
 159         help
 160           G3 and G4 processors have an on-chip temperature sensor called the
 161           'Thermal Assist Unit (TAU)', which, in theory, can measure the on-die
 162           temperature within 2-4 degrees Celsius. This option shows the current
 163           on-die temperature in /proc/cpuinfo if the cpu supports it.
 164
 165           Unfortunately, on some chip revisions, this sensor is very inaccurate
 166           and in some cases, does not work at all, so don't assume the cpu
 167           temp is actually what /proc/cpuinfo says it is.
 168
 169 config TAU_INT
 170         bool "Interrupt driven TAU driver (DANGEROUS)"
 171         depends on TAU
 172         ---help---
 173           The TAU supports an interrupt driven mode which causes an interrupt
 174           whenever the temperature goes out of range. This is the fastest way
 175           to get notified the temp has exceeded a range. With this option off,
 176           a timer is used to re-check the temperature periodically.
 177
 178           However, on some cpus it appears that the TAU interrupt hardware
 179           is buggy and can cause a situation which would lead unexplained hard
 180           lockups.
 181
 182           Unless you are extending the TAU driver, or enjoy kernel/hardware
 183           debugging, leave this option off.
 184
 185 config TAU_AVERAGE
 186         bool "Average high and low temp"
 187         depends on TAU
 188         ---help---
 189           The TAU hardware can compare the temperature to an upper and lower
 190           bound.  The default behavior is to show both the upper and lower
 191           bound in /proc/cpuinfo. If the range is large, the temperature is
 192           either changing a lot, or the TAU hardware is broken (likely on some
 193           G4's). If the range is small (around 4 degrees), the temperature is
 194           relatively stable.  If you say Y here, a single temperature value,
 195           halfway between the upper and lower bounds, will be reported in
 196           /proc/cpuinfo.
 197
 198           If in doubt, say N here.
 199
 200 config MATH_EMULATION
 201         bool "Math emulation"
 202         depends on 4xx || 8xx || E200 || E500
 203         ---help---
 204           Some PowerPC chips designed for embedded applications do not have
 205           a floating-point unit and therefore do not implement the
 206           floating-point instructions in the PowerPC instruction set.  If you
 207           say Y here, the kernel will include code to emulate a floating-point
 208           unit, which will allow programs that use floating-point
 209           instructions to run.
 210
 211           If you have an Apple machine or an IBM RS/6000 or pSeries machine,
 212           or any machine with a 6xx, 7xx or 7xxx series processor, say N
 213           here.  Saying Y here will not hurt performance (on any machine) but
 214           will increase the size of the kernel.
 215
 216 config KEXEC
 217         bool "kexec system call (EXPERIMENTAL)"
 218         depends on EXPERIMENTAL
 219         help
 220           kexec is a system call that implements the ability to shutdown your
 221           current kernel, and to start another kernel.  It is like a reboot
 222           but it is indepedent of the system firmware.   And like a reboot
 223           you can start any kernel with it, not just Linux.
 224
 225           The name comes from the similiarity to the exec system call.
 226
 227           It is an ongoing process to be certain the hardware in a machine
 228           is properly shutdown, so do not be surprised if this code does not
 229           initially work for you.  It may help to enable device hotplugging
 230           support.  As of this writing the exact hardware interface is
 231           strongly in flux, so no good recommendation can be made.
 232
 233           In the GameCube implementation, kexec allows you to load and
 234           run DOL files, including kernel and homebrew DOLs.
 235
 236 source "drivers/cpufreq/Kconfig"
 237
 238 config CPU_FREQ_PMAC
 239         bool "Support for Apple PowerBooks"
 240         depends on CPU_FREQ && ADB_PMU
 241         select CPU_FREQ_TABLE
 242         help
 243           This adds support for frequency switching on Apple PowerBooks,
 244           this currently includes some models of iBook & Titanium
 245           PowerBook.
 246
 247 config PPC601_SYNC_FIX
 248         bool "Workarounds for PPC601 bugs"
 249         depends on 6xx && (PPC_PREP || PPC_PMAC)
 250         help
 251           Some versions of the PPC601 (the first PowerPC chip) have bugs which
 252           mean that extra synchronization instructions are required near
 253           certain instructions, typically those that make major changes to the
 254           CPU state.  These extra instructions reduce performance slightly.
 255           If you say N here, these extra instructions will not be included,
 256           resulting in a kernel which will run faster but may not run at all
 257           on some systems with the PPC601 chip.
 258
 259           If in doubt, say Y here.
 260
 261 config HOTPLUG_CPU
 262         bool "Support for enabling/disabling CPUs"
 263         depends on SMP && HOTPLUG && EXPERIMENTAL && PPC_PMAC
 264         ---help---
 265           Say Y here to be able to disable and re-enable individual
 266           CPUs at runtime on SMP machines.
 267
 268           Say N if you are unsure.
 269
 270 source arch/ppc/platforms/4xx/Kconfig
 271 source arch/ppc/platforms/85xx/Kconfig
 272
 273 config PPC64BRIDGE
 274         bool
 275         depends on POWER3 || POWER4
 276         default y
 277
 278 config PPC_STD_MMU
 279         bool
 280         depends on 6xx || POWER3 || POWER4
 281         default y
 282
 283 config NOT_COHERENT_CACHE
 284         bool
 285         depends on 4xx || 8xx || E200
 286         default y
 287
 288 endmenu
 289
 290 menu "Platform options"
 291
 292 config FADS
 293         bool
 294
 295 choice
 296         prompt "8xx Machine Type"
 297         depends on 8xx
 298         default RPXLITE
 299
 300 config RPXLITE
 301         bool "RPX-Lite"
 302         ---help---
 303           Single-board computers based around the PowerPC MPC8xx chips and
 304           intended for embedded applications.  The following types are
 305           supported:
 306
 307           RPX-Lite:
 308           Embedded Planet RPX Lite. PC104 form-factor SBC based on the MPC823.
 309
 310           RPX-Classic:
 311           Embedded Planet RPX Classic Low-fat. Credit-card-size SBC based on
 312           the MPC 860
 313
 314           BSE-IP:
 315           Bright Star Engineering ip-Engine.
 316
 317           TQM823L:
 318           TQM850L:
 319           TQM855L:
 320           TQM860L:
 321           MPC8xx based family of mini modules, half credit card size,
 322           up to 64 MB of RAM, 8 MB Flash, (Fast) Ethernet, 2 x serial ports,
 323           2 x CAN bus interface, ...
 324           Manufacturer: TQ Components, www.tq-group.de
 325           Date of Release: October (?) 1999
 326           End of Life: not yet :-)
 327           URL:
 328           - module: <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>
 329           - starter kit: <http://www.denx.de/PDF/STK8xxLHWM201.pdf>
 330           - images: <http://www.denx.de/embedded-ppc-en.html>
 331
 332           FPS850L:
 333           FingerPrint Sensor System (based on TQM850L)
 334           Manufacturer: IKENDI AG, <http://www.ikendi.com/>
 335           Date of Release: November 1999
 336           End of life: end 2000 ?
 337           URL: see TQM850L
 338
 339           IVMS8:
 340           MPC860 based board used in the "Integrated Voice Mail System",
 341           Small Version (8 voice channels)
 342           Manufacturer: Speech Design, <http://www.speech-design.de/>
 343           Date of Release: December 2000 (?)
 344           End of life: -
 345           URL: <http://www.speech-design.de/>
 346
 347           IVML24:
 348           MPC860 based board used in the "Integrated Voice Mail System",
 349           Large Version (24 voice channels)
 350           Manufacturer: Speech Design, <http://www.speech-design.de/>
 351           Date of Release: March 2001  (?)
 352           End of life: -
 353           URL: <http://www.speech-design.de/>
 354
 355           HERMES:
 356           Hermes-Pro ISDN/LAN router with integrated 8 x hub
 357           Manufacturer: Multidata Gesellschaft fur Datentechnik und Informatik
 358           <http://www.multidata.de/>
 359           Date of Release: 2000 (?)
 360           End of life: -
 361           URL: <http://www.multidata.de/english/products/hpro.htm>
 362
 363           IP860:
 364           VMEBus IP (Industry Pack) carrier board with MPC860
 365           Manufacturer: MicroSys GmbH, <http://www.microsys.de/>
 366           Date of Release: ?
 367           End of life: -
 368           URL: <http://www.microsys.de/html/ip860.html>
 369
 370           PCU_E:
 371           PCU = Peripheral Controller Unit, Extended
 372           Manufacturer: Siemens AG, ICN (Information and Communication Networks)
 373                 <http://www.siemens.de/page/1,3771,224315-1-999_2_226207-0,00.html>
 374           Date of Release: April 2001
 375           End of life: August 2001
 376           URL: n. a.
 377
 378 config RPXCLASSIC
 379         bool "RPX-Classic"
 380         help
 381           The RPX-Classic is a single-board computer based on the Motorola
 382           MPC860.  It features 16MB of DRAM and a variable amount of flash,
 383           I2C EEPROM, thermal monitoring, a PCMCIA slot, a DIP switch and two
 384           LEDs.  Variants with Ethernet ports exist.  Say Y here to support it
 385           directly.
 386
 387 config BSEIP
 388         bool "BSE-IP"
 389         help
 390           Say Y here to support the Bright Star Engineering ipEngine SBC.
 391           This is a credit-card-sized device featuring a MPC823 processor,
 392           26MB DRAM, 4MB flash, Ethernet, a 16K-gate FPGA, USB, an LCD/video
 393           controller, and two RS232 ports.
 394
 395 config MPC8XXFADS
 396         bool "FADS"
 397         select FADS
 398
 399 config MPC86XADS
 400         bool "MPC86XADS"
 401         help
 402           MPC86x Application Development System by Freescale Semiconductor.
 403           The MPC86xADS is meant to serve as a platform for s/w and h/w
 404           development around the MPC86X processor families.
 405         select FADS
 406
 407 config MPC885ADS
 408         bool "MPC885ADS"
 409         help
 410           Freescale Semiconductor MPC885 Application Development System (ADS).
 411           Also known as DUET.
 412           The MPC885ADS is meant to serve as a platform for s/w and h/w
 413           development around the MPC885 processor family.
 414
 415 config TQM823L
 416         bool "TQM823L"
 417         help
 418           Say Y here to support the TQM823L, one of an MPC8xx-based family of
 419           mini SBCs (half credit-card size) from TQ Components first released
 420           in late 1999.  Technical references are at
 421           <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
 422           <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
 423           <http://www.denx.de/embedded-ppc-en.html>.
 424
 425 config TQM850L
 426         bool "TQM850L"
 427         help
 428           Say Y here to support the TQM850L, one of an MPC8xx-based family of
 429           mini SBCs (half credit-card size) from TQ Components first released
 430           in late 1999.  Technical references are at
 431           <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
 432           <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
 433           <http://www.denx.de/embedded-ppc-en.html>.
 434
 435 config TQM855L
 436         bool "TQM855L"
 437         help
 438           Say Y here to support the TQM855L, one of an MPC8xx-based family of
 439           mini SBCs (half credit-card size) from TQ Components first released
 440           in late 1999.  Technical references are at
 441           <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
 442           <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
 443           <http://www.denx.de/embedded-ppc-en.html>.
 444
 445 config TQM860L
 446         bool "TQM860L"
 447         help
 448           Say Y here to support the TQM860L, one of an MPC8xx-based family of
 449           mini SBCs (half credit-card size) from TQ Components first released
 450           in late 1999.  Technical references are at
 451           <http://www.denx.de/PDF/TQM8xxLHWM201.pdf>, and
 452           <http://www.denx.de/PDF/STK8xxLHWM201.pdf>, and an image at
 453           <http://www.denx.de/embedded-ppc-en.html>.
 454
 455 config FPS850L
 456         bool "FPS850L"
 457
 458 config IVMS8
 459         bool "IVMS8"
 460         help
 461           Say Y here to support the Integrated Voice-Mail Small 8-channel SBC
 462           from Speech Design, released March 2001.  The manufacturer's website
 463           is at <http://www.speech-design.de/>.
 464
 465 config IVML24
 466         bool "IVML24"
 467         help
 468           Say Y here to support the Integrated Voice-Mail Large 24-channel SBC
 469           from Speech Design, released March 2001.  The manufacturer's website
 470           is at <http://www.speech-design.de/>.
 471
 472 config HERMES_PRO
 473         bool "HERMES"
 474
 475 config IP860
 476         bool "IP860"
 477
 478 config LWMON
 479         bool "LWMON"
 480
 481 config PCU_E
 482         bool "PCU_E"
 483
 484 config CCM
 485         bool "CCM"
 486
 487 config LANTEC
 488         bool "LANTEC"
 489
 490 config MBX
 491         bool "MBX"
 492         help
 493           MBX is a line of Motorola single-board computer based around the
 494           MPC821 and MPC860 processors, and intended for embedded-controller
 495           applications.  Say Y here to support these boards directly.
 496
 497 config WINCEPT
 498         bool "WinCept"
 499         help
 500           The Wincept 100/110 is a Motorola single-board computer based on the
 501           MPC821 PowerPC, introduced in 1998 and designed to be used in
 502           thin-client machines.  Say Y to support it directly.
 503
 504 endchoice
 505
 506 choice
 507         prompt "Machine Type"
 508         depends on 6xx || POWER3 || POWER4
 509         default PPC_MULTIPLATFORM
 510         ---help---
 511           Linux currently supports several different kinds of PowerPC-based
 512           machines: Apple Power Macintoshes and clones (such as the Motorola
 513           Starmax series), PReP (PowerPC Reference Platform) machines (such
 514           as the Motorola PowerStacks, Motorola cPCI/VME embedded systems,
 515           and some IBM RS/6000 systems), CHRP (Common Hardware Reference
 516           Platform) machines (including all of the recent IBM RS/6000 and
 517           pSeries machines), and several embedded PowerPC systems containing
 518           4xx, 6xx, 7xx, 8xx, 74xx, and 82xx processors.  Currently, the
 519           default option is to build a kernel which works on the first three.
 520
 521           Select CHRP/PowerMac/PReP if configuring for an IBM RS/6000 or
 522           pSeries machine, a Power Macintosh (including iMacs, iBooks and
 523           Powerbooks), or a PReP machine.
 524
 525           Select Gemini if configuring for a Synergy Microsystems' Gemini
 526           series Single Board Computer.  More information is available at:
 527           <http://www.synergymicro.com/PressRel/97_10_15.html>.
 528
 529           Select APUS if configuring for a PowerUP Amiga.  More information is
 530           available at: <http://linux-apus.sourceforge.net/>.
 531
 532 config PPC_MULTIPLATFORM
 533         bool "CHRP/PowerMac/PReP"
 534
 535 config APUS
 536         bool "Amiga-APUS"
 537         depends on BROKEN
 538         help
 539           Select APUS if configuring for a PowerUP Amiga.
 540           More information is available at:
 541           <http://linux-apus.sourceforge.net/>.
 542
 543 config KATANA
 544         bool "Artesyn-Katana"
 545         help
 546           Select KATANA if configuring an Artesyn KATANA 750i or 3750
 547           cPCI board.
 548
 549 config WILLOW
 550         bool "Cogent-Willow"
 551
 552 config CPCI690
 553         bool "Force-CPCI690"
 554         help
 555           Select CPCI690 if configuring a Force CPCI690 cPCI board.
 556
 557 config POWERPMC250
 558         bool "Force-PowerPMC250"
 559
 560 config CHESTNUT
 561         bool "IBM 750FX Eval board or 750GX Eval board"
 562         help
 563           Select CHESTNUT if configuring an IBM 750FX Eval Board or a
 564           IBM 750GX Eval board.
 565
 566 config SPRUCE
 567         bool "IBM-Spruce"
 568         select PPC_INDIRECT_PCI
 569
 570 config HDPU
 571         bool "Sky-HDPU"
 572         help
 573           Select HDPU if configuring a Sky Computers Compute Blade.
 574
 575 config HDPU_FEATURES
 576         depends HDPU
 577         tristate "HDPU-Features"
 578         help
 579           Select to enable HDPU enhanced features.
 580
 581 config EV64260
 582         bool "Marvell-EV64260BP"
 583         help
 584           Select EV64260 if configuring a Marvell (formerly Galileo)
 585           EV64260BP Evaluation platform.
 586
 587 config LOPEC
 588         bool "Motorola-LoPEC"
 589         select PPC_I8259
 590
 591 config MVME5100
 592         bool "Motorola-MVME5100"
 593         select PPC_INDIRECT_PCI
 594
 595 config PPLUS
 596         bool "Motorola-PowerPlus"
 597         select PPC_I8259
 598         select PPC_INDIRECT_PCI
 599
 600 config PRPMC750
 601         bool "Motorola-PrPMC750"
 602         select PPC_INDIRECT_PCI
 603
 604 config PRPMC800
 605         bool "Motorola-PrPMC800"
 606         select PPC_INDIRECT_PCI
 607
 608 config SANDPOINT
 609         bool "Motorola-Sandpoint"
 610         select PPC_I8259
 611         help
 612           Select SANDPOINT if configuring for a Motorola Sandpoint X3
 613           (any flavor).
 614
 615 config RADSTONE_PPC7D
 616         bool "Radstone Technology PPC7D board"
 617         select PPC_I8259
 618
 619 config PAL4
 620         bool "SBS-Palomar4"
 621
 622 config GEMINI
 623         bool "Synergy-Gemini"
 624         depends on BROKEN
 625         select PPC_INDIRECT_PCI
 626         help
 627           Select Gemini if configuring for a Synergy Microsystems' Gemini
 628           series Single Board Computer.  More information is available at:
 629           <http://www.synergymicro.com/PressRel/97_10_15.html>.
 630
 631 config EST8260
 632         bool "EST8260"
 633         ---help---
 634           The EST8260 is a single-board computer manufactured by Wind River
 635           Systems, Inc. (formerly Embedded Support Tools Corp.) and based on
 636           the MPC8260.  Wind River Systems has a website at
 637           <http://www.windriver.com/>, but the EST8260 cannot be found on it
 638           and has probably been discontinued or rebadged.
 639
 640 config SBC82xx
 641         bool "SBC82xx"
 642         ---help---
 643           SBC PowerQUICC II, single-board computer with MPC82xx CPU
 644           Manufacturer: Wind River Systems, Inc.
 645           Date of Release: May 2003
 646           End of Life: -
 647           URL: <http://www.windriver.com/>
 648
 649 config SBS8260
 650         bool "SBS8260"
 651
 652 config RPX8260
 653         bool "RPXSUPER"
 654
 655 config TQM8260
 656         bool "TQM8260"
 657         ---help---
 658           MPC8260 based module, little larger than credit card,
 659           up to 128 MB global + 64 MB local RAM, 32 MB Flash,
 660           32 kB EEPROM, 256 kB L@ Cache, 10baseT + 100baseT Ethernet,
 661           2 x serial ports, ...
 662           Manufacturer: TQ Components, www.tq-group.de
 663           Date of Release: June 2001
 664           End of Life: not yet :-)
 665           URL: <http://www.denx.de/PDF/TQM82xx_SPEC_Rev005.pdf>
 666
 667 config ADS8272
 668         bool "ADS8272"
 669
 670 config PQ2FADS
 671         bool "Freescale-PQ2FADS"
 672         help
 673           Select PQ2FADS if you wish to configure for a Freescale
 674           PQ2FADS board (-VR or -ZU).
 675
 676 config LITE5200
 677         bool "Freescale LITE5200 / (IceCube)"
 678         select PPC_MPC52xx
 679         help
 680           Support for the LITE5200 dev board for the MPC5200 from Freescale.
 681           This is for the LITE5200 version 2.0 board. Don't know if it changes
 682           much but it's only been tested on this board version. I think this
 683           board is also known as IceCube.
 684
 685 config MPC834x_SYS
 686         bool "Freescale MPC834x SYS"
 687         help
 688           This option enables support for the MPC 834x SYS evaluation board.
 689
 690           Be aware that PCI buses can only function when SYS board is plugged
 691           into the PIB (Platform IO Board) board from Freescale which provide
 692           3 PCI slots.  The PIBs PCI initialization is the bootloader's
 693           responsiblilty.
 694
 695 config EV64360
 696         bool "Marvell-EV64360BP"
 697         help
 698           Select EV64360 if configuring a Marvell EV64360BP Evaluation
 699           platform.
 700 endchoice
 701
 702 config PQ2ADS
 703         bool
 704         depends on ADS8272
 705         default y
 706
 707 config TQM8xxL
 708         bool
 709         depends on 8xx && (TQM823L || TQM850L || FPS850L || TQM855L || TQM860L)
 710         default y
 711
 712 config EMBEDDEDBOOT
 713         bool
 714         depends on 8xx || 8260
 715         default y
 716
 717 config PPC_MPC52xx
 718         bool
 719
 720 config 8260
 721         bool "CPM2 Support" if WILLOW
 722         depends on 6xx
 723         default y if TQM8260 || RPX8260 || EST8260 || SBS8260 || SBC82xx || PQ2FADS
 724         help
 725           The MPC8260 is a typical embedded CPU made by Motorola.  Selecting
 726           this option means that you wish to build a kernel for a machine with
 727           an 8260 class CPU.
 728
 729 config 8272
 730         bool
 731         depends on 6xx
 732         default y if ADS8272
 733         select 8260
 734         help
 735           The MPC8272 CPM has a different internal dpram setup than other CPM2
 736           devices
 737
 738 config 83xx
 739         bool
 740         default y if MPC834x_SYS
 741
 742 config MPC834x
 743         bool
 744         default y if MPC834x_SYS
 745
 746 config PPC_83xx
 747         bool
 748         default y if 83xx
 749
 750 config CPM1
 751         bool
 752         depends on 8xx
 753         default y
 754         help
 755           The CPM1 (Communications Processor Module) is a coprocessor on
 756           embedded CPUs made by Motorola.  Selecting this option means that
 757           you wish to build a kernel for a machine with a CPM1 coprocessor
 758           on it (8xx, 827x, 8560).
 759
 760 config CPM2
 761         bool
 762         depends on 8260 || MPC8560 || MPC8555
 763         default y
 764         help
 765           The CPM2 (Communications Processor Module) is a coprocessor on
 766           embedded CPUs made by Motorola.  Selecting this option means that
 767           you wish to build a kernel for a machine with a CPM2 coprocessor
 768           on it (826x, 827x, 8560).
 769
 770 config PPC_CHRP
 771         bool
 772         depends on PPC_MULTIPLATFORM
 773         select PPC_I8259
 774         select PPC_INDIRECT_PCI
 775         default y
 776
 777 config PPC_PMAC
 778         bool
 779         depends on PPC_MULTIPLATFORM
 780         select PPC_INDIRECT_PCI
 781         default y
 782
 783 config PPC_PMAC64
 784         bool
 785         depends on PPC_PMAC && POWER4
 786         default y
 787
 788 config PPC_PREP
 789         bool
 790         depends on PPC_MULTIPLATFORM
 791         select PPC_I8259
 792         select PPC_INDIRECT_PCI
 793         default y
 794
 795 config PPC_OF
 796         bool
 797         depends on PPC_PMAC || PPC_CHRP
 798         default y
 799
 800 config PPC_GEN550
 801         bool
 802         depends on SANDPOINT || SPRUCE || PPLUS || \
 803                 PRPMC750 || PRPMC800 || LOPEC || \
 804                 (EV64260 && !SERIAL_MPSC) || CHESTNUT || RADSTONE_PPC7D || \
 805                 83xx
 806         default y
 807
 808 config FORCE
 809         bool
 810         depends on 6xx && POWERPMC250
 811         default y
 812
 813 config GT64260
 814         bool
 815         depends on EV64260 || CPCI690
 816         default y
 817
 818 config MV64360          # Really MV64360 & MV64460
 819         bool
 820         depends on CHESTNUT || KATANA || RADSTONE_PPC7D || HDPU || EV64360
 821         default y
 822
 823 config MV64X60
 824         bool
 825         depends on (GT64260 || MV64360)
 826         select PPC_INDIRECT_PCI
 827         default y
 828
 829 menu "Set bridge options"
 830         depends on MV64X60
 831
 832 config NOT_COHERENT_CACHE
 833         bool "Turn off Cache Coherency"
 834         default n
 835         help
 836           Some 64x60 bridges lock up when trying to enforce cache coherency.
 837           When this option is selected, cache coherency will be turned off.
 838           Note that this can cause other problems (e.g., stale data being
 839           speculatively loaded via a cached mapping).  Use at your own risk.
 840
 841 config MV64X60_BASE
 842         hex "Set bridge base used by firmware"
 843         default "0xf1000000"
 844         help
 845           A firmware can leave the base address of the bridge's registers at
 846           a non-standard location.  If so, set this value to reflect the
 847           address of that non-standard location.
 848
 849 config MV64X60_NEW_BASE
 850         hex "Set bridge base used by kernel"
 851         default "0xf1000000"
 852         help
 853           If the current base address of the bridge's registers is not where
 854           you want it, set this value to the address that you want it moved to.
 855
 856 endmenu
 857
 858 config NONMONARCH_SUPPORT
 859         bool "Enable Non-Monarch Support"
 860         depends on PRPMC800
 861
 862 config HARRIER
 863         bool
 864         depends on PRPMC800
 865         default y
 866
 867 config EPIC_SERIAL_MODE
 868         bool
 869         depends on 6xx && (LOPEC || SANDPOINT)
 870         default y
 871
 872 config MPC10X_BRIDGE
 873         bool
 874         depends on POWERPMC250 || LOPEC || SANDPOINT
 875         select PPC_INDIRECT_PCI
 876         default y
 877
 878 config MPC10X_OPENPIC
 879         bool
 880         depends on POWERPMC250 || LOPEC || SANDPOINT
 881         default y
 882
 883 config MPC10X_STORE_GATHERING
 884         bool "Enable MPC10x store gathering"
 885         depends on MPC10X_BRIDGE
 886
 887 config SANDPOINT_ENABLE_UART1
 888         bool "Enable DUART mode on Sandpoint"
 889         depends on SANDPOINT
 890         help
 891           If this option is enabled then the MPC824x processor will run
 892           in DUART mode instead of UART mode.
 893
 894 config HARRIER_STORE_GATHERING
 895         bool "Enable Harrier store gathering"
 896         depends on HARRIER
 897
 898 config MVME5100_IPMC761_PRESENT
 899         bool "MVME5100 configured with an IPMC761"
 900         depends on MVME5100
 901         select PPC_I8259
 902
 903 config SPRUCE_BAUD_33M
 904         bool "Spruce baud clock support"
 905         depends on SPRUCE
 906
 907 config PC_KEYBOARD
 908         bool "PC PS/2 style Keyboard"
 909         depends on 4xx || CPM2
 910
 911 config PPCBUG_NVRAM
 912         bool "Enable reading PPCBUG NVRAM during boot" if PPLUS || LOPEC
 913         default y if PPC_PREP
 914
 915 config SMP
 916         depends on PPC_STD_MMU
 917         bool "Symmetric multi-processing support"
 918         ---help---
 919           This enables support for systems with more than one CPU. If you have
 920           a system with only one CPU, say N. If you have a system with more
 921           than one CPU, say Y.  Note that the kernel does not currently
 922           support SMP machines with 603/603e/603ev or PPC750 ("G3") processors
 923           since they have inadequate hardware support for multiprocessor
 924           operation.
 925
 926           If you say N here, the kernel will run on single and multiprocessor
 927           machines, but will use only one CPU of a multiprocessor machine. If
 928           you say Y here, the kernel will run on single-processor machines.
 929           On a single-processor machine, the kernel will run faster if you say
 930           N here.
 931
 932           If you don't know what to do here, say N.
 933
 934 config IRQ_ALL_CPUS
 935         bool "Distribute interrupts on all CPUs by default"
 936         depends on SMP && !MV64360
 937         help
 938           This option gives the kernel permission to distribute IRQs across
 939           multiple CPUs.  Saying N here will route all IRQs to the first
 940           CPU.  Generally saying Y is safe, although some problems have been
 941           reported with SMP Power Macintoshes with this option enabled.
 942
 943 config NR_CPUS
 944         int "Maximum number of CPUs (2-32)"
 945         range 2 32
 946         depends on SMP
 947         default "4"
 948
 949 config HIGHMEM
 950         bool "High memory support"
 951
 952 source kernel/Kconfig.hz
 953 source kernel/Kconfig.preempt
 954 source "mm/Kconfig"
 955
 956 source "fs/Kconfig.binfmt"
 957
 958 config PROC_DEVICETREE
 959         bool "Support for Open Firmware device tree in /proc"
 960         depends on PPC_OF && PROC_FS
 961         help
 962           This option adds a device-tree directory under /proc which contains
 963           an image of the device tree that the kernel copies from Open
 964           Firmware. If unsure, say Y here.
 965
 966 config PREP_RESIDUAL
 967         bool "Support for PReP Residual Data"
 968         depends on PPC_PREP
 969         help
 970           Some PReP systems have residual data passed to the kernel by the
 971           firmware.  This allows detection of memory size, devices present and
 972           other useful pieces of information.  Sometimes this information is
 973           not present or incorrect, in which case it could lead to the machine
 974           behaving incorrectly.  If this happens, either disable PREP_RESIDUAL
 975           or pass the 'noresidual' option to the kernel.
 976
 977           If you are running a PReP system, say Y here, otherwise say N.
 978
 979 config PROC_PREPRESIDUAL
 980         bool "Support for reading of PReP Residual Data in /proc"
 981         depends on PREP_RESIDUAL && PROC_FS
 982         help
 983           Enabling this option will create a /proc/residual file which allows
 984           you to get at the residual data on PReP systems.  You will need a tool
 985           (lsresidual) to parse it.  If you aren't on a PReP system, you don't
 986           want this.
 987
 988 config CMDLINE_BOOL
 989         bool "Default bootloader kernel arguments"
 990
 991 config CMDLINE
 992         string "Initial kernel command string"
 993         depends on CMDLINE_BOOL
 994         default "console=ttyS0,9600 console=tty0 root=/dev/sda2"
 995         help
 996           On some platforms, there is currently no way for the boot loader to
 997           pass arguments to the kernel. For these platforms, you can supply
 998           some command-line options at build time by entering them here.  In
 999           most cases you will need to specify the root device here.
1000
1001 config AMIGA
1002         bool
1003         depends on APUS
1004         default y
1005         help
1006           This option enables support for the Amiga series of computers.
1007
1008 config ZORRO
1009         bool
1010         depends on APUS
1011         default y
1012         help
1013           This enables support for the Zorro bus in the Amiga. If you have
1014           expansion cards in your Amiga that conform to the Amiga
1015           AutoConfig(tm) specification, say Y, otherwise N. Note that even
1016           expansion cards that do not fit in the Zorro slots but fit in e.g.
1017           the CPU slot may fall in this category, so you have to say Y to let
1018           Linux use these.
1019
1020 config ABSTRACT_CONSOLE
1021         bool
1022         depends on APUS
1023         default y
1024
1025 config APUS_FAST_EXCEPT
1026         bool
1027         depends on APUS
1028         default y
1029
1030 config AMIGA_PCMCIA
1031         bool "Amiga 1200/600 PCMCIA support"
1032         depends on APUS && EXPERIMENTAL
1033         help
1034           Include support in the kernel for pcmcia on Amiga 1200 and Amiga
1035           600. If you intend to use pcmcia cards say Y; otherwise say N.
1036
1037 config AMIGA_BUILTIN_SERIAL
1038         tristate "Amiga builtin serial support"
1039         depends on APUS
1040         help
1041           If you want to use your Amiga's built-in serial port in Linux,
1042           answer Y.
1043
1044           To compile this driver as a module, choose M here.
1045
1046 config GVPIOEXT
1047         tristate "GVP IO-Extender support"
1048         depends on APUS
1049         help
1050           If you want to use a GVP IO-Extender serial card in Linux, say Y.
1051           Otherwise, say N.
1052
1053 config GVPIOEXT_LP
1054         tristate "GVP IO-Extender parallel printer support"
1055         depends on GVPIOEXT
1056         help
1057           Say Y to enable driving a printer from the parallel port on your
1058           GVP IO-Extender card, N otherwise.
1059
1060 config GVPIOEXT_PLIP
1061         tristate "GVP IO-Extender PLIP support"
1062         depends on GVPIOEXT
1063         help
1064           Say Y to enable doing IP over the parallel port on your GVP
1065           IO-Extender card, N otherwise.
1066
1067 config MULTIFACE_III_TTY
1068         tristate "Multiface Card III serial support"
1069         depends on APUS
1070         help
1071           If you want to use a Multiface III card's serial port in Linux,
1072           answer Y.
1073
1074           To compile this driver as a module, choose M here.
1075
1076 config A2232
1077         tristate "Commodore A2232 serial support (EXPERIMENTAL)"
1078         depends on EXPERIMENTAL && APUS
1079         ---help---
1080           This option supports the 2232 7-port serial card shipped with the
1081           Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
1082           a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
1083           each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
1084           ports were connected with 8 pin DIN connectors on the card bracket,
1085           for which 8 pin to DB25 adapters were supplied. The card also had
1086           jumpers internally to toggle various pinning configurations.
1087
1088           This driver can be built as a module; but then "generic_serial"
1089           will also be built as a module. This has to be loaded before
1090           "ser_a2232". If you want to do this, answer M here.
1091
1092 config WHIPPET_SERIAL
1093         tristate "Hisoft Whippet PCMCIA serial support"
1094         depends on AMIGA_PCMCIA
1095         help
1096           HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
1097           is no listing for the Whippet in their Amiga section.
1098
1099 config APNE
1100         tristate "PCMCIA NE2000 support"
1101         depends on AMIGA_PCMCIA
1102         help
1103           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
1104           say N.
1105
1106           To compile this driver as a module, choose M here: the
1107           module will be called apne.
1108
1109 config SERIAL_CONSOLE
1110         bool "Support for serial port console"
1111         depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
1112
1113 config HEARTBEAT
1114         bool "Use power LED as a heartbeat"
1115         depends on APUS
1116         help
1117           Use the power-on LED on your machine as a load meter.  The exact
1118           behavior is platform-dependent, but normally the flash frequency is
1119           a hyperbolic function of the 5-minute load average.
1120
1121 config PROC_HARDWARE
1122         bool "/proc/hardware support"
1123         depends on APUS
1124
1125 source "drivers/zorro/Kconfig"
1126
1127 if !44x || BROKEN
1128 source kernel/power/Kconfig
1129 endif
1130
1131 config SECCOMP
1132         bool "Enable seccomp to safely compute untrusted bytecode"
1133         depends on PROC_FS
1134         default y
1135         help
1136           This kernel feature is useful for number crunching applications
1137           that may need to compute untrusted bytecode during their
1138           execution. By using pipes or other transports made available to
1139           the process as file descriptors supporting the read/write
1140           syscalls, it's possible to isolate those applications in
1141           their own address space using seccomp. Once seccomp is
1142           enabled via /proc/<pid>/seccomp, it cannot be disabled
1143           and the task is only allowed to execute a few safe syscalls
1144           defined by each seccomp mode.
1145
1146           If unsure, say Y. Only embedded should say N here.
1147
1148 endmenu
1149
1150 config ISA_DMA_API
1151         bool
1152         default y
1153
1154 menu "Bus options"
1155
1156 config ISA
1157         bool "Support for ISA-bus hardware"
1158         depends on PPC_PREP || PPC_CHRP
1159         select PPC_I8259
1160         help
1161           Find out whether you have ISA slots on your motherboard.  ISA is the
1162           name of a bus system, i.e. the way the CPU talks to the other stuff
1163           inside your box.  If you have an Apple machine, say N here; if you
1164           have an IBM RS/6000 or pSeries machine or a PReP machine, say Y.  If
1165           you have an embedded board, consult your board documentation.
1166
1167 config GENERIC_ISA_DMA
1168         bool
1169         depends on POWER3 || POWER4 || 6xx && !CPM2
1170         default y
1171
1172 config PPC_I8259
1173         bool
1174         default y if 85xx
1175         default n
1176
1177 config PPC_INDIRECT_PCI
1178         bool
1179         depends on PCI
1180         default y if 40x || 44x || 85xx || 83xx
1181         default n
1182
1183 config EISA
1184         bool
1185         help
1186           The Extended Industry Standard Architecture (EISA) bus is a bus
1187           architecture used on some older intel-based PCs.
1188
1189 config SBUS
1190         bool
1191
1192 # Yes MCA RS/6000s exist but Linux-PPC does not currently support any
1193 config MCA
1194         bool
1195
1196 config PCI
1197         bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
1198         default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
1199         default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
1200         default PCI_QSPAN if !4xx && !CPM2 && 8xx
1201         help
1202           Find out whether your system includes a PCI bus. PCI is the name of
1203           a bus system, i.e. the way the CPU talks to the other stuff inside
1204           your box.  If you say Y here, the kernel will include drivers and
1205           infrastructure code to support PCI bus devices.
1206
1207 config PCI_DOMAINS
1208         bool
1209         default PCI
1210
1211 config MPC83xx_PCI2
1212         bool "  Supprt for 2nd PCI host controller"
1213         depends on PCI && MPC834x
1214         default y if MPC834x_SYS
1215
1216 config PCI_QSPAN
1217         bool "QSpan PCI"
1218         depends on !4xx && !CPM2 && 8xx
1219         select PPC_I8259
1220         help
1221           Say Y here if you have a system based on a Motorola 8xx-series
1222           embedded processor with a QSPAN PCI interface, otherwise say N.
1223
1224 config PCI_8260
1225         bool
1226         depends on PCI && 8260
1227         select PPC_INDIRECT_PCI
1228         default y
1229
1230 config 8260_PCI9
1231         bool "  Enable workaround for MPC826x erratum PCI 9"
1232         depends on PCI_8260 && !ADS8272
1233         default y
1234
1235 choice
1236         prompt "  IDMA channel for PCI 9 workaround"
1237         depends on 8260_PCI9
1238
1239 config 8260_PCI9_IDMA1
1240         bool "IDMA1"
1241
1242 config 8260_PCI9_IDMA2
1243         bool "IDMA2"
1244
1245 config 8260_PCI9_IDMA3
1246         bool "IDMA3"
1247
1248 config 8260_PCI9_IDMA4
1249         bool "IDMA4"
1250
1251 endchoice
1252
1253 config PCI_PERMEDIA
1254         bool "PCI for Permedia2"
1255         depends on !4xx && !8xx && APUS
1256
1257 source "drivers/pci/Kconfig"
1258
1259 source "drivers/pcmcia/Kconfig"
1260
1261 config RAPIDIO
1262         bool "RapidIO support" if MPC8540 || MPC8560
1263         help
1264           If you say Y here, the kernel will include drivers and
1265           infrastructure code to support RapidIO interconnect devices.
1266
1267 source "drivers/rapidio/Kconfig"
1268
1269 endmenu
1270
1271 menu "Advanced setup"
1272
1273 config ADVANCED_OPTIONS
1274         bool "Prompt for advanced kernel configuration options"
1275         help
1276           This option will enable prompting for a variety of advanced kernel
1277           configuration options.  These options can cause the kernel to not
1278           work if they are set incorrectly, but can be used to optimize certain
1279           aspects of kernel memory management.
1280
1281           Unless you know what you are doing, say N here.
1282
1283 comment "Default settings for advanced configuration options are used"
1284         depends on !ADVANCED_OPTIONS
1285
1286 config HIGHMEM_START_BOOL
1287         bool "Set high memory pool address"
1288         depends on ADVANCED_OPTIONS && HIGHMEM
1289         help
1290           This option allows you to set the base address of the kernel virtual
1291           area used to map high memory pages.  This can be useful in
1292           optimizing the layout of kernel virtual memory.
1293
1294           Say N here unless you know what you are doing.
1295
1296 config HIGHMEM_START
1297         hex "Virtual start address of high memory pool" if HIGHMEM_START_BOOL
1298         default "0xfe000000"
1299
1300 config LOWMEM_SIZE_BOOL
1301         bool "Set maximum low memory"
1302         depends on ADVANCED_OPTIONS
1303         help
1304           This option allows you to set the maximum amount of memory which
1305           will be used as "low memory", that is, memory which the kernel can
1306           access directly, without having to set up a kernel virtual mapping.
1307           This can be useful in optimizing the layout of kernel virtual
1308           memory.
1309
1310           Say N here unless you know what you are doing.
1311
1312 config LOWMEM_SIZE
1313         hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
1314         default "0x30000000"
1315
1316 config KERNEL_START_BOOL
1317         bool "Set custom kernel base address"
1318         depends on ADVANCED_OPTIONS
1319         help
1320           This option allows you to set the kernel virtual address at which
1321           the kernel will map low memory (the kernel image will be linked at
1322           this address).  This can be useful in optimizing the virtual memory
1323           layout of the system.
1324
1325           Say N here unless you know what you are doing.
1326
1327 config KERNEL_START
1328         hex "Virtual address of kernel base" if KERNEL_START_BOOL
1329         default "0xc0000000"
1330
1331 config TASK_SIZE_BOOL
1332         bool "Set custom user task size"
1333         depends on ADVANCED_OPTIONS
1334         help
1335           This option allows you to set the amount of virtual address space
1336           allocated to user tasks.  This can be useful in optimizing the
1337           virtual memory layout of the system.
1338
1339           Say N here unless you know what you are doing.
1340
1341 config TASK_SIZE
1342         hex "Size of user task space" if TASK_SIZE_BOOL
1343         default "0x80000000"
1344
1345 config CONSISTENT_START_BOOL
1346         bool "Set custom consistent memory pool address"
1347         depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1348         help
1349           This option allows you to set the base virtual address
1350           of the the consistent memory pool.  This pool of virtual
1351           memory is used to make consistent memory allocations.
1352
1353 config CONSISTENT_START
1354         hex "Base virtual address of consistent memory pool" if CONSISTENT_START_BOOL
1355         default "0xff100000" if NOT_COHERENT_CACHE
1356
1357 config CONSISTENT_SIZE_BOOL
1358         bool "Set custom consistent memory pool size"
1359         depends on ADVANCED_OPTIONS && NOT_COHERENT_CACHE
1360         help
1361           This option allows you to set the size of the the
1362           consistent memory pool.  This pool of virtual memory
1363           is used to make consistent memory allocations.
1364
1365 config CONSISTENT_SIZE
1366         hex "Size of consistent memory pool" if CONSISTENT_SIZE_BOOL
1367         default "0x00200000" if NOT_COHERENT_CACHE
1368
1369 config BOOT_LOAD_BOOL
1370         bool "Set the boot link/load address"
1371         depends on ADVANCED_OPTIONS && !PPC_MULTIPLATFORM
1372         help
1373           This option allows you to set the initial load address of the zImage
1374           or zImage.initrd file.  This can be useful if you are on a board
1375           which has a small amount of memory.
1376
1377           Say N here unless you know what you are doing.
1378
1379 config BOOT_LOAD
1380         hex "Link/load address for booting" if BOOT_LOAD_BOOL
1381         default "0x00400000" if 40x || 8xx || 8260
1382         default "0x01000000" if 44x
1383         default "0x00800000"
1384
1385 config PIN_TLB
1386         bool "Pinned Kernel TLBs (860 ONLY)"
1387         depends on ADVANCED_OPTIONS && 8xx
1388 endmenu
1389
1390 source "net/Kconfig"
1391
1392 source "drivers/Kconfig"
1393
1394 source "fs/Kconfig"
1395
1396 source "arch/ppc/8xx_io/Kconfig"
1397
1398 source "arch/ppc/8260_io/Kconfig"
1399
1400
1401 menu "IBM 40x options"
1402         depends on 40x
1403
1404 config SERIAL_SICC
1405         bool "SICC Serial port"
1406         depends on STB03xxx
1407
1408 config UART1_DFLT_CONSOLE
1409         bool
1410         depends on SERIAL_SICC && UART0_TTYS1
1411         default y
1412
1413 config SERIAL_SICC_CONSOLE
1414         bool
1415         depends on SERIAL_SICC && UART0_TTYS1
1416         default y
1417
1418 endmenu
1419
1420 source "lib/Kconfig"
1421
1422 source "arch/powerpc/oprofile/Kconfig"
1423
1424 source "arch/ppc/Kconfig.debug"
1425
1426 source "security/Kconfig"
1427
1428 source "crypto/Kconfig"