arch/ppc/platforms/rpxclassic.h

   1 /*
   2  * A collection of structures, addresses, and values associated with
   3  * the RPCG RPX-Classic board.  Copied from the RPX-Lite stuff.
   4  *
   5  * Copyright (c) 1998 Dan Malek (dmalek@jlc.net)
   6  */
   7 #ifdef __KERNEL__
   8 #ifndef __MACH_RPX_DEFS
   9 #define __MACH_RPX_DEFS
  10
  11 #include <linux/config.h>
  12
  13 #ifndef __ASSEMBLY__
  14 /* A Board Information structure that is given to a program when
  15  * prom starts it up.
  16  */
  17 typedef struct bd_info {
  18         unsigned int    bi_memstart;    /* Memory start address */
  19         unsigned int    bi_memsize;     /* Memory (end) size in bytes */
  20         unsigned int    bi_intfreq;     /* Internal Freq, in Hz */
  21         unsigned int    bi_busfreq;     /* Bus Freq, in Hz */
  22         unsigned char   bi_enetaddr[6];
  23         unsigned int    bi_baudrate;
  24 } bd_t;
  25
  26 extern bd_t m8xx_board_info;
  27
  28 /* Memory map is configured by the PROM startup.
  29  * We just map a few things we need.  The CSR is actually 4 byte-wide
  30  * registers that can be accessed as 8-, 16-, or 32-bit values.
  31  */
  32 #define PCI_ISA_IO_ADDR         ((unsigned)0x80000000)
  33 #define PCI_ISA_IO_SIZE         ((uint)(512 * 1024 * 1024))
  34 #define PCI_ISA_MEM_ADDR        ((unsigned)0xc0000000)
  35 #define PCI_ISA_MEM_SIZE        ((uint)(512 * 1024 * 1024))
  36 #define RPX_CSR_ADDR            ((uint)0xfa400000)
  37 #define RPX_CSR_SIZE            ((uint)(4 * 1024))
  38 #define IMAP_ADDR               ((uint)0xfa200000)
  39 #define IMAP_SIZE               ((uint)(64 * 1024))
  40 #define PCI_CSR_ADDR            ((uint)0x80000000)
  41 #define PCI_CSR_SIZE            ((uint)(64 * 1024))
  42 #define PCMCIA_MEM_ADDR         ((uint)0xe0000000)
  43 #define PCMCIA_MEM_SIZE         ((uint)(64 * 1024))
  44 #define PCMCIA_IO_ADDR          ((uint)0xe4000000)
  45 #define PCMCIA_IO_SIZE          ((uint)(4 * 1024))
  46 #define PCMCIA_ATTRB_ADDR       ((uint)0xe8000000)
  47 #define PCMCIA_ATTRB_SIZE       ((uint)(4 * 1024))
  48
  49 /* Things of interest in the CSR.
  50 */
  51 #define BCSR0_ETHEN             ((uint)0x80000000)
  52 #define BCSR0_ETHLPBK           ((uint)0x40000000)
  53 #define BCSR0_COLTESTDIS        ((uint)0x20000000)
  54 #define BCSR0_FULLDPLXDIS       ((uint)0x10000000)
  55 #define BCSR0_ENFLSHSEL         ((uint)0x04000000)
  56 #define BCSR0_FLASH_SEL         ((uint)0x02000000)
  57 #define BCSR0_ENMONXCVR         ((uint)0x01000000)
  58
  59 #define BCSR0_PCMCIAVOLT        ((uint)0x000f0000)      /* CLLF */
  60 #define BCSR0_PCMCIA3VOLT       ((uint)0x000a0000)      /* CLLF */
  61 #define BCSR0_PCMCIA5VOLT       ((uint)0x00060000)      /* CLLF */
  62
  63 #define BCSR1_IPB5SEL           ((uint)0x00100000)
  64 #define BCSR1_PCVCTL4           ((uint)0x00080000)
  65 #define BCSR1_PCVCTL5           ((uint)0x00040000)
  66 #define BCSR1_PCVCTL6           ((uint)0x00020000)
  67 #define BCSR1_PCVCTL7           ((uint)0x00010000)
  68
  69 #define BCSR2_EN232XCVR         ((uint)0x00008000)
  70 #define BCSR2_QSPACESEL         ((uint)0x00004000)
  71 #define BCSR2_FETHLEDMODE       ((uint)0x00000800)      /* CLLF */
  72
  73 #if defined(CONFIG_HTDMSOUND)
  74 #include <platforms/rpxhiox.h>
  75 #endif
  76
  77 /* define IO_BASE for pcmcia, CLLF only */
  78 #if !defined(CONFIG_PCI)
  79 #define _IO_BASE 0x80000000
  80 #define _IO_BASE_SIZE 0x1000
  81
  82 /* for pcmcia sandisk */
  83 #ifdef CONFIG_IDE
  84 # define MAX_HWIFS 1
  85 #endif
  86 #endif
  87
  88 /* Interrupt level assignments.
  89 */
  90 #define FEC_INTERRUPT   SIU_LEVEL1      /* FEC interrupt */
  91
  92
  93 /* CPM Ethernet through SCCx.
  94  *
  95  * Bits in parallel I/O port registers that have to be set/cleared
  96  * to configure the pins for SCC1 use.
  97  */
  98 #define PA_ENET_RXD     ((ushort)0x0001)
  99 #define PA_ENET_TXD     ((ushort)0x0002)
 100 #define PA_ENET_TCLK    ((ushort)0x0200)
 101 #define PA_ENET_RCLK    ((ushort)0x0800)
 102 #define PB_ENET_TENA    ((uint)0x00001000)
 103 #define PC_ENET_CLSN    ((ushort)0x0010)
 104 #define PC_ENET_RENA    ((ushort)0x0020)
 105
 106 /* Control bits in the SICR to route TCLK (CLK2) and RCLK (CLK4) to
 107  * SCC1.  Also, make sure GR1 (bit 24) and SC1 (bit 25) are zero.
 108  */
 109 #define SICR_ENET_MASK  ((uint)0x000000ff)
 110 #define SICR_ENET_CLKRT ((uint)0x0000003d)
 111
 112 /* We don't use the 8259.
 113 */
 114
 115 #define NR_8259_INTS    0
 116
 117 #endif /* !__ASSEMBLY__ */
 118 #endif /* __MACH_RPX_DEFS */
 119 #endif /* __KERNEL__ */