]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/ppc/syslib/mpc10x_common.c
projects / mirror_ubuntu-artful-kernel.git / blob
? search:
summary | shortlog | log | commit | commitdiff | tree
blame | history | raw | HEAD
Linux-2.6.12-rc2
[mirror_ubuntu-artful-kernel.git] / arch / ppc / syslib / mpc10x_common.c
1 /*
2 * arch/ppc/syslib/mpc10x_common.c
3 *
4 * Common routines for the Motorola SPS MPC106, MPC107 and MPC8240 Host bridge,
5 * Mem ctlr, EPIC, etc.
6 *
7 * Author: Mark A. Greer
8 * mgreer@mvista.com
9 *
10 * 2001 (c) MontaVista, Software, Inc. This file is licensed under
11 * the terms of the GNU General Public License version 2. This program
12 * is licensed "as is" without any warranty of any kind, whether express
13 * or implied.
14 */
15
16 /*
17 * *** WARNING - A BAT MUST be set to access the PCI config addr/data regs ***
18 */
19
20 #include <linux/kernel.h>
21 #include <linux/init.h>
22 #include <linux/pci.h>
23 #include <linux/slab.h>
24
25 #include <asm/byteorder.h>
26 #include <asm/io.h>
27 #include <asm/irq.h>
28 #include <asm/uaccess.h>
29 #include <asm/machdep.h>
30 #include <asm/pci-bridge.h>
31 #include <asm/open_pic.h>
32 #include <asm/mpc10x.h>
33 #include <asm/ocp.h>
34
35 /* The OCP structure is fixed by code below, before OCP initialises.
36 paddr depends on where the board places the EUMB.
37 - fixed in mpc10x_bridge_init().
38 irq depends on two things:
39 > does the board use the EPIC at all? (PCORE does not).
40 > is the EPIC in serial or parallel mode?
41 - fixed in mpc10x_set_openpic().
42 */
43
44 #ifdef CONFIG_MPC10X_OPENPIC
45 #ifdef CONFIG_EPIC_SERIAL_MODE
46 #define EPIC_IRQ_BASE (epic_serial_mode ? 16 : 5)
47 #else
48 #define EPIC_IRQ_BASE 5
49 #endif
50 #define MPC10X_I2C_IRQ (EPIC_IRQ_BASE + NUM_8259_INTERRUPTS)
51 #define MPC10X_DMA0_IRQ (EPIC_IRQ_BASE + 1 + NUM_8259_INTERRUPTS)
52 #define MPC10X_DMA1_IRQ (EPIC_IRQ_BASE + 2 + NUM_8259_INTERRUPTS)
53 #else
54 #define MPC10X_I2C_IRQ OCP_IRQ_NA
55 #define MPC10X_DMA0_IRQ OCP_IRQ_NA
56 #define MPC10X_DMA1_IRQ OCP_IRQ_NA
57 #endif
58
59
60 struct ocp_def core_ocp[] = {
61 { .vendor = OCP_VENDOR_INVALID
62 }
63 };
64
65 static struct ocp_fs_i2c_data mpc10x_i2c_data = {
66 .flags = 0
67 };
68 static struct ocp_def mpc10x_i2c_ocp = {
69 .vendor = OCP_VENDOR_MOTOROLA,
70 .function = OCP_FUNC_IIC,
71 .index = 0,
72 .additions = &mpc10x_i2c_data
73 };
74
75 static struct ocp_def mpc10x_dma_ocp[2] = {
76 { .vendor = OCP_VENDOR_MOTOROLA,
77 .function = OCP_FUNC_DMA,
78 .index = 0 },
79 { .vendor = OCP_VENDOR_MOTOROLA,
80 .function = OCP_FUNC_DMA,
81 .index = 1 }
82 };
83
84 /* Set resources to match bridge memory map */
85 void __init
86 mpc10x_bridge_set_resources(int map, struct pci_controller *hose)
87 {
88
89 switch (map) {
90 case MPC10X_MEM_MAP_A:
91 pci_init_resource(&hose->io_resource,
92 0x00000000,
93 0x3f7fffff,
94 IORESOURCE_IO,
95 "PCI host bridge");
96
97 pci_init_resource (&hose->mem_resources[0],
98 0xc0000000,
99 0xfeffffff,
100 IORESOURCE_MEM,
101 "PCI host bridge");
102 break;
103 case MPC10X_MEM_MAP_B:
104 pci_init_resource(&hose->io_resource,
105 0x00000000,
106 0x00bfffff,
107 IORESOURCE_IO,
108 "PCI host bridge");
109
110 pci_init_resource (&hose->mem_resources[0],
111 0x80000000,
112 0xfcffffff,
113 IORESOURCE_MEM,
114 "PCI host bridge");
115 break;
116 default:
117 printk("mpc10x_bridge_set_resources: "
118 "Invalid map specified\n");
119 if (ppc_md.progress)
120 ppc_md.progress("mpc10x:exit1", 0x100);
121 }
122 }
123 /*
124 * Do some initialization and put the EUMB registers at the specified address
125 * (also map the EPIC registers into virtual space--OpenPIC_Addr will be set).
126 *
127 * The EPIC is not on the 106, only the 8240 and 107.
128 */
129 int __init
130 mpc10x_bridge_init(struct pci_controller *hose,
131 uint current_map,
132 uint new_map,
133 uint phys_eumb_base)
134 {
135 int host_bridge, picr1, picr1_bit;
136 ulong pci_config_addr, pci_config_data;
137 u_char pir, byte;
138
139 if (ppc_md.progress) ppc_md.progress("mpc10x:enter", 0x100);
140
141 /* Set up for current map so we can get at config regs */
142 switch (current_map) {
143 case MPC10X_MEM_MAP_A:
144 setup_indirect_pci(hose,
145 MPC10X_MAPA_CNFG_ADDR,
146 MPC10X_MAPA_CNFG_DATA);
147 break;
148 case MPC10X_MEM_MAP_B:
149 setup_indirect_pci(hose,
150 MPC10X_MAPB_CNFG_ADDR,
151 MPC10X_MAPB_CNFG_DATA);
152 break;
153 default:
154 printk("mpc10x_bridge_init: %s\n",
155 "Invalid current map specified");
156 if (ppc_md.progress)
157 ppc_md.progress("mpc10x:exit1", 0x100);
158 return -1;
159 }
160
161 /* Make sure it's a supported bridge */
162 early_read_config_dword(hose,
163 0,
164 PCI_DEVFN(0,0),
165 PCI_VENDOR_ID,
166 &host_bridge);
167
168 switch (host_bridge) {
169 case MPC10X_BRIDGE_106:
170 case MPC10X_BRIDGE_8240:
171 case MPC10X_BRIDGE_107:
172 case MPC10X_BRIDGE_8245:
173 break;
174 default:
175 if (ppc_md.progress)
176 ppc_md.progress("mpc10x:exit2", 0x100);
177 return -1;
178 }
179
180 switch (new_map) {
181 case MPC10X_MEM_MAP_A:
182 MPC10X_SETUP_HOSE(hose, A);
183 pci_config_addr = MPC10X_MAPA_CNFG_ADDR;
184 pci_config_data = MPC10X_MAPA_CNFG_DATA;
185 picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_A;
186 break;
187 case MPC10X_MEM_MAP_B:
188 MPC10X_SETUP_HOSE(hose, B);
189 pci_config_addr = MPC10X_MAPB_CNFG_ADDR;
190 pci_config_data = MPC10X_MAPB_CNFG_DATA;
191 picr1_bit = MPC10X_CFG_PICR1_ADDR_MAP_B;
192 break;
193 default:
194 printk("mpc10x_bridge_init: %s\n",
195 "Invalid new map specified");
196 if (ppc_md.progress)
197 ppc_md.progress("mpc10x:exit3", 0x100);
198 return -1;
199 }
200
201 /* Make bridge use the 'new_map', if not already usng it */
202 if (current_map != new_map) {
203 early_read_config_dword(hose,
204 0,
205 PCI_DEVFN(0,0),
206 MPC10X_CFG_PICR1_REG,
207 &picr1);
208
209 picr1 = (picr1 & ~MPC10X_CFG_PICR1_ADDR_MAP_MASK) |
210 picr1_bit;
211
212 early_write_config_dword(hose,
213 0,
214 PCI_DEVFN(0,0),
215 MPC10X_CFG_PICR1_REG,
216 picr1);
217
218 asm volatile("sync");
219
220 /* Undo old mappings & map in new cfg data/addr regs */
221 iounmap((void *)hose->cfg_addr);
222 iounmap((void *)hose->cfg_data);
223
224 setup_indirect_pci(hose,
225 pci_config_addr,
226 pci_config_data);
227 }
228
229 /* Setup resources to match map */
230 mpc10x_bridge_set_resources(new_map, hose);
231
232 /*
233 * Want processor accesses of 0xFDxxxxxx to be mapped
234 * to PCI memory space at 0x00000000. Do not want
235 * host bridge to respond to PCI memory accesses of
236 * 0xFDxxxxxx. Do not want host bridge to respond
237 * to PCI memory addresses 0xFD000000-0xFDFFFFFF;
238 * want processor accesses from 0x000A0000-0x000BFFFF
239 * to be forwarded to system memory.
240 *
241 * Only valid if not in agent mode and using MAP B.
242 */
243 if (new_map == MPC10X_MEM_MAP_B) {
244 early_read_config_byte(hose,
245 0,
246 PCI_DEVFN(0,0),
247 MPC10X_CFG_MAPB_OPTIONS_REG,
248 &byte);
249
250 byte &= ~(MPC10X_CFG_MAPB_OPTIONS_PFAE |
251 MPC10X_CFG_MAPB_OPTIONS_PCICH |
252 MPC10X_CFG_MAPB_OPTIONS_PROCCH);
253
254 if (host_bridge != MPC10X_BRIDGE_106) {
255 byte |= MPC10X_CFG_MAPB_OPTIONS_CFAE;
256 }
257
258 early_write_config_byte(hose,
259 0,
260 PCI_DEVFN(0,0),
261 MPC10X_CFG_MAPB_OPTIONS_REG,
262 byte);
263 }
264
265 if (host_bridge != MPC10X_BRIDGE_106) {
266 early_read_config_byte(hose,
267 0,
268 PCI_DEVFN(0,0),
269 MPC10X_CFG_PIR_REG,
270 &pir);
271
272 if (pir != MPC10X_CFG_PIR_HOST_BRIDGE) {
273 printk("Host bridge in Agent mode\n");
274 /* Read or Set LMBAR & PCSRBAR? */
275 }
276
277 /* Set base addr of the 8240/107 EUMB. */
278 early_write_config_dword(hose,
279 0,
280 PCI_DEVFN(0,0),
281 MPC10X_CFG_EUMBBAR,
282 phys_eumb_base);
283 #ifdef CONFIG_MPC10X_OPENPIC
284 /* Map EPIC register part of EUMB into vitual memory - PCORE
285 uses an i8259 instead of EPIC. */
286 OpenPIC_Addr =
287 ioremap(phys_eumb_base + MPC10X_EUMB_EPIC_OFFSET,
288 MPC10X_EUMB_EPIC_SIZE);
289 #endif
290 mpc10x_i2c_ocp.paddr = phys_eumb_base + MPC10X_EUMB_I2C_OFFSET;
291 mpc10x_i2c_ocp.irq = MPC10X_I2C_IRQ;
292 ocp_add_one_device(&mpc10x_i2c_ocp);
293 mpc10x_dma_ocp[0].paddr = phys_eumb_base +
294 MPC10X_EUMB_DMA_OFFSET + 0x100;
295 mpc10x_dma_ocp[0].irq = MPC10X_DMA0_IRQ;
296 ocp_add_one_device(&mpc10x_dma_ocp[0]);
297 mpc10x_dma_ocp[1].paddr = phys_eumb_base +
298 MPC10X_EUMB_DMA_OFFSET + 0x200;
299 mpc10x_dma_ocp[1].irq = MPC10X_DMA1_IRQ;
300 ocp_add_one_device(&mpc10x_dma_ocp[1]);
301 }
302
303 #ifdef CONFIG_MPC10X_STORE_GATHERING
304 mpc10x_enable_store_gathering(hose);
305 #else
306 mpc10x_disable_store_gathering(hose);
307 #endif
308
309 /*
310 * 8240 erratum 26, 8241/8245 erratum 29, 107 erratum 23: speculative
311 * PCI reads may return stale data so turn off.
312 */
313 if ((host_bridge == MPC10X_BRIDGE_8240)
314 || (host_bridge == MPC10X_BRIDGE_8245)
315 || (host_bridge == MPC10X_BRIDGE_107)) {
316
317 early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
318 MPC10X_CFG_PICR1_REG, &picr1);
319
320 picr1 &= ~MPC10X_CFG_PICR1_SPEC_PCI_RD;
321
322 early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
323 MPC10X_CFG_PICR1_REG, picr1);
324 }
325
326 /*
327 * 8241/8245 erratum 28: PCI reads from local memory may return
328 * stale data. Workaround by setting PICR2[0] to disable copyback
329 * optimization. Oddly, the latest available user manual for the
330 * 8245 (Rev 2., dated 10/2003) says PICR2[0] is reserverd.
331 */
332 if (host_bridge == MPC10X_BRIDGE_8245) {
333 ulong picr2;
334
335 early_read_config_dword(hose, 0, PCI_DEVFN(0,0),
336 MPC10X_CFG_PICR2_REG, &picr2);
337
338 picr2 |= MPC10X_CFG_PICR2_COPYBACK_OPT;
339
340 early_write_config_dword(hose, 0, PCI_DEVFN(0,0),
341 MPC10X_CFG_PICR2_REG, picr2);
342 }
343
344 if (ppc_md.progress) ppc_md.progress("mpc10x:exit", 0x100);
345 return 0;
346 }
347
348 /*
349 * Need to make our own PCI config space access macros because
350 * mpc10x_get_mem_size() is called before the data structures are set up for
351 * the 'early_xxx' and 'indirect_xxx' routines to work.
352 * Assumes bus 0.
353 */
354 #define MPC10X_CFG_read(val, addr, type, op) *val = op((type)(addr))
355 #define MPC10X_CFG_write(val, addr, type, op) op((type *)(addr), (val))
356
357 #define MPC10X_PCI_OP(rw, size, type, op, mask) \
358 static void \
359 mpc10x_##rw##_config_##size(uint *cfg_addr, uint *cfg_data, int devfn, int offset, type val) \
360 { \
361 out_be32(cfg_addr, \
362 ((offset & 0xfc) << 24) | (devfn << 16) \
363 | (0 << 8) | 0x80); \
364 MPC10X_CFG_##rw(val, cfg_data + (offset & mask), type, op); \
365 return; \
366 }
367
368 MPC10X_PCI_OP(read, byte, u8 *, in_8, 3)
369 MPC10X_PCI_OP(read, dword, u32 *, in_le32, 0)
370 #if 0 /* Not used */
371 MPC10X_PCI_OP(write, byte, u8, out_8, 3)
372 MPC10X_PCI_OP(read, word, u16 *, in_le16, 2)
373 MPC10X_PCI_OP(write, word, u16, out_le16, 2)
374 MPC10X_PCI_OP(write, dword, u32, out_le32, 0)
375 #endif
376
377 /*
378 * Read the memory controller registers to determine the amount of memory in
379 * the system. This assumes that the firmware has correctly set up the memory
380 * controller registers.
381 */
382 unsigned long __init
383 mpc10x_get_mem_size(uint mem_map)
384 {
385 uint *config_addr, *config_data, val;
386 ulong start, end, total, offset;
387 int i;
388 u_char bank_enables;
389
390 switch (mem_map) {
391 case MPC10X_MEM_MAP_A:
392 config_addr = (uint *)MPC10X_MAPA_CNFG_ADDR;
393 config_data = (uint *)MPC10X_MAPA_CNFG_DATA;
394 break;
395 case MPC10X_MEM_MAP_B:
396 config_addr = (uint *)MPC10X_MAPB_CNFG_ADDR;
397 config_data = (uint *)MPC10X_MAPB_CNFG_DATA;
398 break;
399 default:
400 return 0;
401 }
402
403 mpc10x_read_config_byte(config_addr,
404 config_data,
405 PCI_DEVFN(0,0),
406 MPC10X_MCTLR_MEM_BANK_ENABLES,
407 &bank_enables);
408
409 total = 0;
410
411 for (i=0; i<8; i++) {
412 if (bank_enables & (1 << i)) {
413 offset = MPC10X_MCTLR_MEM_START_1 + ((i > 3) ? 4 : 0);
414 mpc10x_read_config_dword(config_addr,
415 config_data,
416 PCI_DEVFN(0,0),
417 offset,
418 &val);
419 start = (val >> ((i & 3) << 3)) & 0xff;
420
421 offset = MPC10X_MCTLR_EXT_MEM_START_1 + ((i>3) ? 4 : 0);
422 mpc10x_read_config_dword(config_addr,
423 config_data,
424 PCI_DEVFN(0,0),
425 offset,
426 &val);
427 val = (val >> ((i & 3) << 3)) & 0x03;
428 start = (val << 28) | (start << 20);
429
430 offset = MPC10X_MCTLR_MEM_END_1 + ((i > 3) ? 4 : 0);
431 mpc10x_read_config_dword(config_addr,
432 config_data,
433 PCI_DEVFN(0,0),
434 offset,
435 &val);
436 end = (val >> ((i & 3) << 3)) & 0xff;
437
438 offset = MPC10X_MCTLR_EXT_MEM_END_1 + ((i > 3) ? 4 : 0);
439 mpc10x_read_config_dword(config_addr,
440 config_data,
441 PCI_DEVFN(0,0),
442 offset,
443 &val);
444 val = (val >> ((i & 3) << 3)) & 0x03;
445 end = (val << 28) | (end << 20) | 0xfffff;
446
447 total += (end - start + 1);
448 }
449 }
450
451 return total;
452 }
453
454 int __init
455 mpc10x_enable_store_gathering(struct pci_controller *hose)
456 {
457 uint picr1;
458
459 early_read_config_dword(hose,
460 0,
461 PCI_DEVFN(0,0),
462 MPC10X_CFG_PICR1_REG,
463 &picr1);
464
465 picr1 |= MPC10X_CFG_PICR1_ST_GATH_EN;
466
467 early_write_config_dword(hose,
468 0,
469 PCI_DEVFN(0,0),
470 MPC10X_CFG_PICR1_REG,
471 picr1);
472
473 return 0;
474 }
475
476 int __init
477 mpc10x_disable_store_gathering(struct pci_controller *hose)
478 {
479 uint picr1;
480
481 early_read_config_dword(hose,
482 0,
483 PCI_DEVFN(0,0),
484 MPC10X_CFG_PICR1_REG,
485 &picr1);
486
487 picr1 &= ~MPC10X_CFG_PICR1_ST_GATH_EN;
488
489 early_write_config_dword(hose,
490 0,
491 PCI_DEVFN(0,0),
492 MPC10X_CFG_PICR1_REG,
493 picr1);
494
495 return 0;
496 }
497
498 #ifdef CONFIG_MPC10X_OPENPIC
499 void __init mpc10x_set_openpic(void)
500 {
501 /* Map external IRQs */
502 openpic_set_sources(0, EPIC_IRQ_BASE, OpenPIC_Addr + 0x10200);
503 /* Skip reserved space and map i2c and DMA Ch[01] */
504 openpic_set_sources(EPIC_IRQ_BASE, 3, OpenPIC_Addr + 0x11020);
505 /* Skip reserved space and map Message Unit Interrupt (I2O) */
506 openpic_set_sources(EPIC_IRQ_BASE + 3, 1, OpenPIC_Addr + 0x110C0);
507
508 openpic_init(NUM_8259_INTERRUPTS);
509 }
510 #endif
Ubuntu Artful kernel mirror