arch/sh64/Kconfig

   1 #
   2 # For a description of the syntax of this configuration file,
   3 # see Documentation/kbuild/config-language.txt.
   4 #
   5
   6 mainmenu "Linux/SH64 Kernel Configuration"
   7
   8 config SUPERH
   9         bool
  10         default y
  11
  12 config SUPERH64
  13         bool
  14         default y
  15
  16 config MMU
  17         bool
  18         default y
  19
  20 config UID16
  21         bool
  22         default y
  23
  24 config RWSEM_GENERIC_SPINLOCK
  25         bool
  26         default y
  27
  28 config GENERIC_CALIBRATE_DELAY
  29         bool
  30         default y
  31
  32 config LOG_BUF_SHIFT
  33         int
  34         default 14
  35
  36 config RWSEM_XCHGADD_ALGORITHM
  37         bool
  38
  39 config GENERIC_ISA_DMA
  40         bool
  41
  42 source init/Kconfig
  43
  44 menu "System type"
  45
  46 choice
  47         prompt "SuperH system type"
  48         default SH_SIMULATOR
  49
  50 config SH_GENERIC
  51         bool "Generic"
  52
  53 config SH_SIMULATOR
  54         bool "Simulator"
  55
  56 config SH_CAYMAN
  57         bool "Cayman"
  58
  59 config SH_ROMRAM
  60         bool "ROM/RAM"
  61
  62 config SH_HARP
  63         bool "ST50-Harp"
  64
  65 endchoice
  66
  67 choice
  68         prompt "Processor family"
  69         default CPU_SH5
  70
  71 config CPU_SH5
  72         bool "SH-5"
  73
  74 endchoice
  75
  76 choice
  77         prompt "Processor type"
  78
  79 config CPU_SUBTYPE_SH5_101
  80         bool "SH5-101"
  81         depends on CPU_SH5
  82
  83 config CPU_SUBTYPE_SH5_103
  84         bool "SH5-103"
  85         depends on CPU_SH5
  86
  87 endchoice
  88
  89 choice
  90         prompt "Endianness"
  91         default LITTLE_ENDIAN
  92
  93 config LITTLE_ENDIAN
  94         bool "Little-Endian"
  95
  96 config BIG_ENDIAN
  97         bool "Big-Endian"
  98
  99 endchoice
 100
 101 config SH_FPU
 102         bool "FPU support"
 103         default y
 104
 105 config SH64_FPU_DENORM_FLUSH
 106         depends on SH_FPU
 107         bool "Flush floating point denorms to zero"
 108
 109 choice
 110         prompt "Page table levels"
 111         default SH64_PGTABLE_2_LEVEL
 112
 113 config SH64_PGTABLE_2_LEVEL
 114         bool "2"
 115
 116 config SH64_PGTABLE_3_LEVEL
 117         bool "3"
 118
 119 endchoice
 120
 121 choice
 122         prompt "HugeTLB page size"
 123         depends on HUGETLB_PAGE && MMU
 124         default HUGETLB_PAGE_SIZE_64K
 125
 126 config HUGETLB_PAGE_SIZE_64K
 127         bool "64K"
 128
 129 config HUGETLB_PAGE_SIZE_1MB
 130         bool "1MB"
 131
 132 config HUGETLB_PAGE_SIZE_512MB
 133         bool "512MB"
 134
 135 endchoice
 136
 137 config SH64_USER_MISALIGNED_FIXUP
 138         bool "Fixup misaligned loads/stores occurring in user mode"
 139
 140 comment "Memory options"
 141
 142 config CACHED_MEMORY_OFFSET
 143         hex "Cached Area Offset"
 144         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 145         default "20000000"
 146
 147 config MEMORY_START
 148         hex "Physical memory start address"
 149         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 150         default "80000000"
 151
 152 config MEMORY_SIZE_IN_MB
 153         int "Memory size (in MB)" if SH_HARP || SH_CAYMAN || SH_SIMULATOR
 154         default "64" if SH_HARP || SH_CAYMAN
 155         default "8" if SH_SIMULATOR
 156
 157 comment "Cache options"
 158
 159 config DCACHE_DISABLED
 160         bool "DCache Disabling"
 161         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 162
 163 choice
 164         prompt "DCache mode"
 165         depends on !DCACHE_DISABLED && !SH_SIMULATOR
 166         default DCACHE_WRITE_BACK
 167
 168 config DCACHE_WRITE_BACK
 169         bool "Write-back"
 170
 171 config DCACHE_WRITE_THROUGH
 172         bool "Write-through"
 173
 174 endchoice
 175
 176 config ICACHE_DISABLED
 177         bool "ICache Disabling"
 178         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 179
 180 config PCIDEVICE_MEMORY_START
 181         hex
 182         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 183         default "C0000000"
 184
 185 config DEVICE_MEMORY_START
 186         hex
 187         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 188         default "E0000000"
 189
 190 config FLASH_MEMORY_START
 191         hex "Flash memory/on-chip devices start address"
 192         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 193         default "00000000"
 194
 195 config PCI_BLOCK_START
 196         hex "PCI block start address"
 197         depends on SH_HARP || SH_CAYMAN || SH_SIMULATOR
 198         default "40000000"
 199
 200 comment "CPU Subtype specific options"
 201
 202 config SH64_ID2815_WORKAROUND
 203         bool "Include workaround for SH5-101 cut2 silicon defect ID2815"
 204
 205 comment "Misc options"
 206 config HEARTBEAT
 207         bool "Heartbeat LED"
 208
 209 config HDSP253_LED
 210         bool "Support for HDSP-253 LED"
 211         depends on SH_CAYMAN
 212
 213 config SH_DMA
 214         tristate "DMA controller (DMAC) support"
 215
 216 config PREEMPT
 217         bool "Preemptible Kernel (EXPERIMENTAL)"
 218         depends on EXPERIMENTAL
 219
 220 source "mm/Kconfig"
 221
 222 endmenu
 223
 224 menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)"
 225
 226 config ISA
 227         bool
 228
 229 config SBUS
 230         bool
 231
 232 config PCI
 233         bool "PCI support"
 234         help
 235           Find out whether you have a PCI motherboard. PCI is the name of a
 236           bus system, i.e. the way the CPU talks to the other stuff inside
 237           your box. Other bus systems are ISA, EISA, MicroChannel (MCA) or
 238           VESA. If you have PCI, say Y, otherwise N.
 239
 240           The PCI-HOWTO, available from
 241           <http://www.tldp.org/docs.html#howto>, contains valuable
 242           information about which PCI hardware does work under Linux and which
 243           doesn't.
 244
 245 config SH_PCIDMA_NONCOHERENT
 246         bool "Cache and PCI noncoherent"
 247         depends on PCI
 248         default y
 249         help
 250           Enable this option if your platform does not have a CPU cache which
 251           remains coherent with PCI DMA. It is safest to say 'Y', although you
 252           will see better performance if you can say 'N', because the PCI DMA
 253           code will not have to flush the CPU's caches. If you have a PCI host
 254           bridge integrated with your SH CPU, refer carefully to the chip specs
 255           to see if you can say 'N' here. Otherwise, leave it as 'Y'.
 256
 257 source "drivers/pci/Kconfig"
 258
 259 source "drivers/pcmcia/Kconfig"
 260
 261 source "drivers/pci/hotplug/Kconfig"
 262
 263 endmenu
 264
 265 menu "Executable file formats"
 266
 267 source "fs/Kconfig.binfmt"
 268
 269 endmenu
 270
 271 source "net/Kconfig"
 272
 273 source "drivers/Kconfig"
 274
 275 source "fs/Kconfig"
 276
 277 source "arch/sh64/oprofile/Kconfig"
 278
 279 source "arch/sh64/Kconfig.debug"
 280
 281 source "security/Kconfig"
 282
 283 source "crypto/Kconfig"
 284
 285 source "lib/Kconfig"
 286
 287 #
 288 # Use the generic interrupt handling code in kernel/irq/:
 289 #
 290 config GENERIC_HARDIRQS
 291         bool
 292         default y
 293
 294 config GENERIC_IRQ_PROBE
 295         bool
 296         default y
 297