arch/x86/include/asm/pgtable-3level.h

   1 /* SPDX-License-Identifier: GPL-2.0 */
   2 #ifndef _ASM_X86_PGTABLE_3LEVEL_H
   3 #define _ASM_X86_PGTABLE_3LEVEL_H
   4
   5 /*
   6  * Intel Physical Address Extension (PAE) Mode - three-level page
   7  * tables on PPro+ CPUs.
   8  *
   9  * Copyright (C) 1999 Ingo Molnar <mingo@redhat.com>
  10  */
  11
  12 #define pte_ERROR(e)                                                    \
  13         pr_err("%s:%d: bad pte %p(%08lx%08lx)\n",                       \
  14                __FILE__, __LINE__, &(e), (e).pte_high, (e).pte_low)
  15 #define pmd_ERROR(e)                                                    \
  16         pr_err("%s:%d: bad pmd %p(%016Lx)\n",                           \
  17                __FILE__, __LINE__, &(e), pmd_val(e))
  18 #define pgd_ERROR(e)                                                    \
  19         pr_err("%s:%d: bad pgd %p(%016Lx)\n",                           \
  20                __FILE__, __LINE__, &(e), pgd_val(e))
  21
  22 /* Rules for using set_pte: the pte being assigned *must* be
  23  * either not present or in a state where the hardware will
  24  * not attempt to update the pte.  In places where this is
  25  * not possible, use pte_get_and_clear to obtain the old pte
  26  * value and then use set_pte to update it.  -ben
  27  */
  28 static inline void native_set_pte(pte_t *ptep, pte_t pte)
  29 {
  30         ptep->pte_high = pte.pte_high;
  31         smp_wmb();
  32         ptep->pte_low = pte.pte_low;
  33 }
  34
  35 #define pmd_read_atomic pmd_read_atomic
  36 /*
  37  * pte_offset_map_lock on 32bit PAE kernels was reading the pmd_t with
  38  * a "*pmdp" dereference done by gcc. Problem is, in certain places
  39  * where pte_offset_map_lock is called, concurrent page faults are
  40  * allowed, if the mmap_sem is hold for reading. An example is mincore
  41  * vs page faults vs MADV_DONTNEED. On the page fault side
  42  * pmd_populate rightfully does a set_64bit, but if we're reading the
  43  * pmd_t with a "*pmdp" on the mincore side, a SMP race can happen
  44  * because gcc will not read the 64bit of the pmd atomically. To fix
  45  * this all places running pmd_offset_map_lock() while holding the
  46  * mmap_sem in read mode, shall read the pmdp pointer using this
  47  * function to know if the pmd is null nor not, and in turn to know if
  48  * they can run pmd_offset_map_lock or pmd_trans_huge or other pmd
  49  * operations.
  50  *
  51  * Without THP if the mmap_sem is hold for reading, the pmd can only
  52  * transition from null to not null while pmd_read_atomic runs. So
  53  * we can always return atomic pmd values with this function.
  54  *
  55  * With THP if the mmap_sem is hold for reading, the pmd can become
  56  * trans_huge or none or point to a pte (and in turn become "stable")
  57  * at any time under pmd_read_atomic. We could read it really
  58  * atomically here with a atomic64_read for the THP enabled case (and
  59  * it would be a whole lot simpler), but to avoid using cmpxchg8b we
  60  * only return an atomic pmdval if the low part of the pmdval is later
  61  * found stable (i.e. pointing to a pte). And we're returning a none
  62  * pmdval if the low part of the pmd is none. In some cases the high
  63  * and low part of the pmdval returned may not be consistent if THP is
  64  * enabled (the low part may point to previously mapped hugepage,
  65  * while the high part may point to a more recently mapped hugepage),
  66  * but pmd_none_or_trans_huge_or_clear_bad() only needs the low part
  67  * of the pmd to be read atomically to decide if the pmd is unstable
  68  * or not, with the only exception of when the low part of the pmd is
  69  * zero in which case we return a none pmd.
  70  */
  71 static inline pmd_t pmd_read_atomic(pmd_t *pmdp)
  72 {
  73         pmdval_t ret;
  74         u32 *tmp = (u32 *)pmdp;
  75
  76         ret = (pmdval_t) (*tmp);
  77         if (ret) {
  78                 /*
  79                  * If the low part is null, we must not read the high part
  80                  * or we can end up with a partial pmd.
  81                  */
  82                 smp_rmb();
  83                 ret |= ((pmdval_t)*(tmp + 1)) << 32;
  84         }
  85
  86         return (pmd_t) { ret };
  87 }
  88
  89 static inline void native_set_pte_atomic(pte_t *ptep, pte_t pte)
  90 {
  91         set_64bit((unsigned long long *)(ptep), native_pte_val(pte));
  92 }
  93
  94 static inline void native_set_pmd(pmd_t *pmdp, pmd_t pmd)
  95 {
  96         set_64bit((unsigned long long *)(pmdp), native_pmd_val(pmd));
  97 }
  98
  99 static inline void native_set_pud(pud_t *pudp, pud_t pud)
 100 {
 101         set_64bit((unsigned long long *)(pudp), native_pud_val(pud));
 102 }
 103
 104 /*
 105  * For PTEs and PDEs, we must clear the P-bit first when clearing a page table
 106  * entry, so clear the bottom half first and enforce ordering with a compiler
 107  * barrier.
 108  */
 109 static inline void native_pte_clear(struct mm_struct *mm, unsigned long addr,
 110                                     pte_t *ptep)
 111 {
 112         ptep->pte_low = 0;
 113         smp_wmb();
 114         ptep->pte_high = 0;
 115 }
 116
 117 static inline void native_pmd_clear(pmd_t *pmd)
 118 {
 119         u32 *tmp = (u32 *)pmd;
 120         *tmp = 0;
 121         smp_wmb();
 122         *(tmp + 1) = 0;
 123 }
 124
 125 static inline void native_pud_clear(pud_t *pudp)
 126 {
 127 }
 128
 129 static inline void pud_clear(pud_t *pudp)
 130 {
 131         set_pud(pudp, __pud(0));
 132
 133         /*
 134          * According to Intel App note "TLBs, Paging-Structure Caches,
 135          * and Their Invalidation", April 2007, document 317080-001,
 136          * section 8.1: in PAE mode we explicitly have to flush the
 137          * TLB via cr3 if the top-level pgd is changed...
 138          *
 139          * Currently all places where pud_clear() is called either have
 140          * flush_tlb_mm() followed or don't need TLB flush (x86_64 code or
 141          * pud_clear_bad()), so we don't need TLB flush here.
 142          */
 143 }
 144
 145 #ifdef CONFIG_SMP
 146 static inline pte_t native_ptep_get_and_clear(pte_t *ptep)
 147 {
 148         pte_t res;
 149
 150         /* xchg acts as a barrier before the setting of the high bits */
 151         res.pte_low = xchg(&ptep->pte_low, 0);
 152         res.pte_high = ptep->pte_high;
 153         ptep->pte_high = 0;
 154
 155         return res;
 156 }
 157 #else
 158 #define native_ptep_get_and_clear(xp) native_local_ptep_get_and_clear(xp)
 159 #endif
 160
 161 #ifdef CONFIG_SMP
 162 union split_pmd {
 163         struct {
 164                 u32 pmd_low;
 165                 u32 pmd_high;
 166         };
 167         pmd_t pmd;
 168 };
 169 static inline pmd_t native_pmdp_get_and_clear(pmd_t *pmdp)
 170 {
 171         union split_pmd res, *orig = (union split_pmd *)pmdp;
 172
 173         /* xchg acts as a barrier before setting of the high bits */
 174         res.pmd_low = xchg(&orig->pmd_low, 0);
 175         res.pmd_high = orig->pmd_high;
 176         orig->pmd_high = 0;
 177
 178         return res.pmd;
 179 }
 180 #else
 181 #define native_pmdp_get_and_clear(xp) native_local_pmdp_get_and_clear(xp)
 182 #endif
 183
 184 #ifdef CONFIG_SMP
 185 union split_pud {
 186         struct {
 187                 u32 pud_low;
 188                 u32 pud_high;
 189         };
 190         pud_t pud;
 191 };
 192
 193 static inline pud_t native_pudp_get_and_clear(pud_t *pudp)
 194 {
 195         union split_pud res, *orig = (union split_pud *)pudp;
 196
 197         /* xchg acts as a barrier before setting of the high bits */
 198         res.pud_low = xchg(&orig->pud_low, 0);
 199         res.pud_high = orig->pud_high;
 200         orig->pud_high = 0;
 201
 202         return res.pud;
 203 }
 204 #else
 205 #define native_pudp_get_and_clear(xp) native_local_pudp_get_and_clear(xp)
 206 #endif
 207
 208 /* Encode and de-code a swap entry */
 209 #define MAX_SWAPFILES_CHECK() BUILD_BUG_ON(MAX_SWAPFILES_SHIFT > 5)
 210 #define __swp_type(x)                   (((x).val) & 0x1f)
 211 #define __swp_offset(x)                 ((x).val >> 5)
 212 #define __swp_entry(type, offset)       ((swp_entry_t){(type) | (offset) << 5})
 213 #define __pte_to_swp_entry(pte)         ((swp_entry_t){ (pte).pte_high })
 214 #define __swp_entry_to_pte(x)           ((pte_t){ { .pte_high = (x).val } })
 215
 216 #define gup_get_pte gup_get_pte
 217 /*
 218  * WARNING: only to be used in the get_user_pages_fast() implementation.
 219  *
 220  * With get_user_pages_fast(), we walk down the pagetables without taking
 221  * any locks.  For this we would like to load the pointers atomically,
 222  * but that is not possible (without expensive cmpxchg8b) on PAE.  What
 223  * we do have is the guarantee that a PTE will only either go from not
 224  * present to present, or present to not present or both -- it will not
 225  * switch to a completely different present page without a TLB flush in
 226  * between; something that we are blocking by holding interrupts off.
 227  *
 228  * Setting ptes from not present to present goes:
 229  *
 230  *   ptep->pte_high = h;
 231  *   smp_wmb();
 232  *   ptep->pte_low = l;
 233  *
 234  * And present to not present goes:
 235  *
 236  *   ptep->pte_low = 0;
 237  *   smp_wmb();
 238  *   ptep->pte_high = 0;
 239  *
 240  * We must ensure here that the load of pte_low sees 'l' iff pte_high
 241  * sees 'h'. We load pte_high *after* loading pte_low, which ensures we
 242  * don't see an older value of pte_high.  *Then* we recheck pte_low,
 243  * which ensures that we haven't picked up a changed pte high. We might
 244  * have gotten rubbish values from pte_low and pte_high, but we are
 245  * guaranteed that pte_low will not have the present bit set *unless*
 246  * it is 'l'. Because get_user_pages_fast() only operates on present ptes
 247  * we're safe.
 248  */
 249 static inline pte_t gup_get_pte(pte_t *ptep)
 250 {
 251         pte_t pte;
 252
 253         do {
 254                 pte.pte_low = ptep->pte_low;
 255                 smp_rmb();
 256                 pte.pte_high = ptep->pte_high;
 257                 smp_rmb();
 258         } while (unlikely(pte.pte_low != ptep->pte_low));
 259
 260         return pte;
 261 }
 262
 263 #include <asm/pgtable-invert.h>
 264
 265 #endif /* _ASM_X86_PGTABLE_3LEVEL_H */