arch/x86/include/asm/processor-flags.h

   1 #ifndef _ASM_X86_PROCESSOR_FLAGS_H
   2 #define _ASM_X86_PROCESSOR_FLAGS_H
   3
   4 #include <uapi/asm/processor-flags.h>
   5
   6 #ifdef CONFIG_VM86
   7 #define X86_VM_MASK     X86_EFLAGS_VM
   8 #else
   9 #define X86_VM_MASK     0 /* No VM86 support */
  10 #endif
  11
  12 /*
  13  * CR3's layout varies depending on several things.
  14  *
  15  * If CR4.PCIDE is set (64-bit only), then CR3[11:0] is the address space ID.
  16  * If PAE is enabled, then CR3[11:5] is part of the PDPT address
  17  * (i.e. it's 32-byte aligned, not page-aligned) and CR3[4:0] is ignored.
  18  * Otherwise (non-PAE, non-PCID), CR3[3] is PWT, CR3[4] is PCD, and
  19  * CR3[2:0] and CR3[11:5] are ignored.
  20  *
  21  * In all cases, Linux puts zeros in the low ignored bits and in PWT and PCD.
  22  *
  23  * CR3[63] is always read as zero.  If CR4.PCIDE is set, then CR3[63] may be
  24  * written as 1 to prevent the write to CR3 from flushing the TLB.
  25  *
  26  * On systems with SME, one bit (in a variable position!) is stolen to indicate
  27  * that the top-level paging structure is encrypted.
  28  *
  29  * All of the remaining bits indicate the physical address of the top-level
  30  * paging structure.
  31  *
  32  * CR3_ADDR_MASK is the mask used by read_cr3_pa().
  33  */
  34 #ifdef CONFIG_X86_64
  35 /* Mask off the address space ID bits. */
  36 #define CR3_ADDR_MASK 0x7FFFFFFFFFFFF000ull
  37 #define CR3_PCID_MASK 0xFFFull
  38 #define CR3_NOFLUSH (1UL << 63)
  39
  40 #ifdef CONFIG_PAGE_TABLE_ISOLATION
  41 # define X86_CR3_PTI_PCID_USER_BIT      11
  42 #endif
  43
  44 #else
  45 /*
  46  * CR3_ADDR_MASK needs at least bits 31:5 set on PAE systems, and we save
  47  * a tiny bit of code size by setting all the bits.
  48  */
  49 #define CR3_ADDR_MASK 0xFFFFFFFFull
  50 #define CR3_PCID_MASK 0ull
  51 #define CR3_NOFLUSH 0
  52 #endif
  53
  54 #endif /* _ASM_X86_PROCESSOR_FLAGS_H */