arch/x86/kernel/apb_timer.c

   1 // SPDX-License-Identifier: GPL-2.0-only
   2 /*
   3  * apb_timer.c: Driver for Langwell APB timers
   4  *
   5  * (C) Copyright 2009 Intel Corporation
   6  * Author: Jacob Pan (jacob.jun.pan@intel.com)
   7  *
   8  * Note:
   9  * Langwell is the south complex of Intel Moorestown MID platform. There are
  10  * eight external timers in total that can be used by the operating system.
  11  * The timer information, such as frequency and addresses, is provided to the
  12  * OS via SFI tables.
  13  * Timer interrupts are routed via FW/HW emulated IOAPIC independently via
  14  * individual redirection table entries (RTE).
  15  * Unlike HPET, there is no master counter, therefore one of the timers are
  16  * used as clocksource. The overall allocation looks like:
  17  *  - timer 0 - NR_CPUs for per cpu timer
  18  *  - one timer for clocksource
  19  *  - one timer for watchdog driver.
  20  * It is also worth notice that APB timer does not support true one-shot mode,
  21  * free-running mode will be used here to emulate one-shot mode.
  22  * APB timer can also be used as broadcast timer along with per cpu local APIC
  23  * timer, but by default APB timer has higher rating than local APIC timers.
  24  */
  25
  26 #include <linux/delay.h>
  27 #include <linux/dw_apb_timer.h>
  28 #include <linux/errno.h>
  29 #include <linux/init.h>
  30 #include <linux/slab.h>
  31 #include <linux/pm.h>
  32 #include <linux/sfi.h>
  33 #include <linux/interrupt.h>
  34 #include <linux/cpu.h>
  35 #include <linux/irq.h>
  36
  37 #include <asm/fixmap.h>
  38 #include <asm/apb_timer.h>
  39 #include <asm/intel-mid.h>
  40 #include <asm/time.h>
  41
  42 #define APBT_CLOCKEVENT_RATING          110
  43 #define APBT_CLOCKSOURCE_RATING         250
  44
  45 #define APBT_CLOCKEVENT0_NUM   (0)
  46 #define APBT_CLOCKSOURCE_NUM   (2)
  47
  48 static phys_addr_t apbt_address;
  49 static int apb_timer_block_enabled;
  50 static void __iomem *apbt_virt_address;
  51
  52 /*
  53  * Common DW APB timer info
  54  */
  55 static unsigned long apbt_freq;
  56
  57 struct apbt_dev {
  58         struct dw_apb_clock_event_device        *timer;
  59         unsigned int                            num;
  60         int                                     cpu;
  61         unsigned int                            irq;
  62         char                                    name[10];
  63 };
  64
  65 static struct dw_apb_clocksource *clocksource_apbt;
  66
  67 static inline void __iomem *adev_virt_addr(struct apbt_dev *adev)
  68 {
  69         return apbt_virt_address + adev->num * APBTMRS_REG_SIZE;
  70 }
  71
  72 static DEFINE_PER_CPU(struct apbt_dev, cpu_apbt_dev);
  73
  74 #ifdef CONFIG_SMP
  75 static unsigned int apbt_num_timers_used;
  76 #endif
  77
  78 static inline void apbt_set_mapping(void)
  79 {
  80         struct sfi_timer_table_entry *mtmr;
  81         int phy_cs_timer_id = 0;
  82
  83         if (apbt_virt_address) {
  84                 pr_debug("APBT base already mapped\n");
  85                 return;
  86         }
  87         mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
  88         if (mtmr == NULL) {
  89                 printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
  90                        APBT_CLOCKEVENT0_NUM);
  91                 return;
  92         }
  93         apbt_address = (phys_addr_t)mtmr->phys_addr;
  94         if (!apbt_address) {
  95                 printk(KERN_WARNING "No timer base from SFI, use default\n");
  96                 apbt_address = APBT_DEFAULT_BASE;
  97         }
  98         apbt_virt_address = ioremap_nocache(apbt_address, APBT_MMAP_SIZE);
  99         if (!apbt_virt_address) {
 100                 pr_debug("Failed mapping APBT phy address at %lu\n",\
 101                          (unsigned long)apbt_address);
 102                 goto panic_noapbt;
 103         }
 104         apbt_freq = mtmr->freq_hz;
 105         sfi_free_mtmr(mtmr);
 106
 107         /* Now figure out the physical timer id for clocksource device */
 108         mtmr = sfi_get_mtmr(APBT_CLOCKSOURCE_NUM);
 109         if (mtmr == NULL)
 110                 goto panic_noapbt;
 111
 112         /* Now figure out the physical timer id */
 113         pr_debug("Use timer %d for clocksource\n",
 114                  (int)(mtmr->phys_addr & 0xff) / APBTMRS_REG_SIZE);
 115         phy_cs_timer_id = (unsigned int)(mtmr->phys_addr & 0xff) /
 116                 APBTMRS_REG_SIZE;
 117
 118         clocksource_apbt = dw_apb_clocksource_init(APBT_CLOCKSOURCE_RATING,
 119                 "apbt0", apbt_virt_address + phy_cs_timer_id *
 120                 APBTMRS_REG_SIZE, apbt_freq);
 121         return;
 122
 123 panic_noapbt:
 124         panic("Failed to setup APB system timer\n");
 125
 126 }
 127
 128 static inline void apbt_clear_mapping(void)
 129 {
 130         iounmap(apbt_virt_address);
 131         apbt_virt_address = NULL;
 132 }
 133
 134 static int __init apbt_clockevent_register(void)
 135 {
 136         struct sfi_timer_table_entry *mtmr;
 137         struct apbt_dev *adev = this_cpu_ptr(&cpu_apbt_dev);
 138
 139         mtmr = sfi_get_mtmr(APBT_CLOCKEVENT0_NUM);
 140         if (mtmr == NULL) {
 141                 printk(KERN_ERR "Failed to get MTMR %d from SFI\n",
 142                        APBT_CLOCKEVENT0_NUM);
 143                 return -ENODEV;
 144         }
 145
 146         adev->num = smp_processor_id();
 147         adev->timer = dw_apb_clockevent_init(smp_processor_id(), "apbt0",
 148                 intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ?
 149                 APBT_CLOCKEVENT_RATING - 100 : APBT_CLOCKEVENT_RATING,
 150                 adev_virt_addr(adev), 0, apbt_freq);
 151         /* Firmware does EOI handling for us. */
 152         adev->timer->eoi = NULL;
 153
 154         if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 155                 global_clock_event = &adev->timer->ced;
 156                 printk(KERN_DEBUG "%s clockevent registered as global\n",
 157                        global_clock_event->name);
 158         }
 159
 160         dw_apb_clockevent_register(adev->timer);
 161
 162         sfi_free_mtmr(mtmr);
 163         return 0;
 164 }
 165
 166 #ifdef CONFIG_SMP
 167
 168 static void apbt_setup_irq(struct apbt_dev *adev)
 169 {
 170         irq_modify_status(adev->irq, 0, IRQ_MOVE_PCNTXT);
 171         irq_set_affinity(adev->irq, cpumask_of(adev->cpu));
 172 }
 173
 174 /* Should be called with per cpu */
 175 void apbt_setup_secondary_clock(void)
 176 {
 177         struct apbt_dev *adev;
 178         int cpu;
 179
 180         /* Don't register boot CPU clockevent */
 181         cpu = smp_processor_id();
 182         if (!cpu)
 183                 return;
 184
 185         adev = this_cpu_ptr(&cpu_apbt_dev);
 186         if (!adev->timer) {
 187                 adev->timer = dw_apb_clockevent_init(cpu, adev->name,
 188                         APBT_CLOCKEVENT_RATING, adev_virt_addr(adev),
 189                         adev->irq, apbt_freq);
 190                 adev->timer->eoi = NULL;
 191         } else {
 192                 dw_apb_clockevent_resume(adev->timer);
 193         }
 194
 195         printk(KERN_INFO "Registering CPU %d clockevent device %s, cpu %08x\n",
 196                cpu, adev->name, adev->cpu);
 197
 198         apbt_setup_irq(adev);
 199         dw_apb_clockevent_register(adev->timer);
 200
 201         return;
 202 }
 203
 204 /*
 205  * this notify handler process CPU hotplug events. in case of S0i3, nonboot
 206  * cpus are disabled/enabled frequently, for performance reasons, we keep the
 207  * per cpu timer irq registered so that we do need to do free_irq/request_irq.
 208  *
 209  * TODO: it might be more reliable to directly disable percpu clockevent device
 210  * without the notifier chain. currently, cpu 0 may get interrupts from other
 211  * cpu timers during the offline process due to the ordering of notification.
 212  * the extra interrupt is harmless.
 213  */
 214 static int apbt_cpu_dead(unsigned int cpu)
 215 {
 216         struct apbt_dev *adev = &per_cpu(cpu_apbt_dev, cpu);
 217
 218         dw_apb_clockevent_pause(adev->timer);
 219         if (system_state == SYSTEM_RUNNING) {
 220                 pr_debug("skipping APBT CPU %u offline\n", cpu);
 221         } else {
 222                 pr_debug("APBT clockevent for cpu %u offline\n", cpu);
 223                 dw_apb_clockevent_stop(adev->timer);
 224         }
 225         return 0;
 226 }
 227
 228 static __init int apbt_late_init(void)
 229 {
 230         if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT ||
 231                 !apb_timer_block_enabled)
 232                 return 0;
 233         return cpuhp_setup_state(CPUHP_X86_APB_DEAD, "x86/apb:dead", NULL,
 234                                  apbt_cpu_dead);
 235 }
 236 fs_initcall(apbt_late_init);
 237 #else
 238
 239 void apbt_setup_secondary_clock(void) {}
 240
 241 #endif /* CONFIG_SMP */
 242
 243 static int apbt_clocksource_register(void)
 244 {
 245         u64 start, now;
 246         u64 t1;
 247
 248         /* Start the counter, use timer 2 as source, timer 0/1 for event */
 249         dw_apb_clocksource_start(clocksource_apbt);
 250
 251         /* Verify whether apbt counter works */
 252         t1 = dw_apb_clocksource_read(clocksource_apbt);
 253         start = rdtsc();
 254
 255         /*
 256          * We don't know the TSC frequency yet, but waiting for
 257          * 200000 TSC cycles is safe:
 258          * 4 GHz == 50us
 259          * 1 GHz == 200us
 260          */
 261         do {
 262                 rep_nop();
 263                 now = rdtsc();
 264         } while ((now - start) < 200000UL);
 265
 266         /* APBT is the only always on clocksource, it has to work! */
 267         if (t1 == dw_apb_clocksource_read(clocksource_apbt))
 268                 panic("APBT counter not counting. APBT disabled\n");
 269
 270         dw_apb_clocksource_register(clocksource_apbt);
 271
 272         return 0;
 273 }
 274
 275 /*
 276  * Early setup the APBT timer, only use timer 0 for booting then switch to
 277  * per CPU timer if possible.
 278  * returns 1 if per cpu apbt is setup
 279  * returns 0 if no per cpu apbt is chosen
 280  * panic if set up failed, this is the only platform timer on Moorestown.
 281  */
 282 void __init apbt_time_init(void)
 283 {
 284 #ifdef CONFIG_SMP
 285         int i;
 286         struct sfi_timer_table_entry *p_mtmr;
 287         struct apbt_dev *adev;
 288 #endif
 289
 290         if (apb_timer_block_enabled)
 291                 return;
 292         apbt_set_mapping();
 293         if (!apbt_virt_address)
 294                 goto out_noapbt;
 295         /*
 296          * Read the frequency and check for a sane value, for ESL model
 297          * we extend the possible clock range to allow time scaling.
 298          */
 299
 300         if (apbt_freq < APBT_MIN_FREQ || apbt_freq > APBT_MAX_FREQ) {
 301                 pr_debug("APBT has invalid freq 0x%lx\n", apbt_freq);
 302                 goto out_noapbt;
 303         }
 304         if (apbt_clocksource_register()) {
 305                 pr_debug("APBT has failed to register clocksource\n");
 306                 goto out_noapbt;
 307         }
 308         if (!apbt_clockevent_register())
 309                 apb_timer_block_enabled = 1;
 310         else {
 311                 pr_debug("APBT has failed to register clockevent\n");
 312                 goto out_noapbt;
 313         }
 314 #ifdef CONFIG_SMP
 315         /* kernel cmdline disable apb timer, so we will use lapic timers */
 316         if (intel_mid_timer_options == INTEL_MID_TIMER_LAPIC_APBT) {
 317                 printk(KERN_INFO "apbt: disabled per cpu timer\n");
 318                 return;
 319         }
 320         pr_debug("%s: %d CPUs online\n", __func__, num_online_cpus());
 321         if (num_possible_cpus() <= sfi_mtimer_num)
 322                 apbt_num_timers_used = num_possible_cpus();
 323         else
 324                 apbt_num_timers_used = 1;
 325         pr_debug("%s: %d APB timers used\n", __func__, apbt_num_timers_used);
 326
 327         /* here we set up per CPU timer data structure */
 328         for (i = 0; i < apbt_num_timers_used; i++) {
 329                 adev = &per_cpu(cpu_apbt_dev, i);
 330                 adev->num = i;
 331                 adev->cpu = i;
 332                 p_mtmr = sfi_get_mtmr(i);
 333                 if (p_mtmr)
 334                         adev->irq = p_mtmr->irq;
 335                 else
 336                         printk(KERN_ERR "Failed to get timer for cpu %d\n", i);
 337                 snprintf(adev->name, sizeof(adev->name) - 1, "apbt%d", i);
 338         }
 339 #endif
 340
 341         return;
 342
 343 out_noapbt:
 344         apbt_clear_mapping();
 345         apb_timer_block_enabled = 0;
 346         panic("failed to enable APB timer\n");
 347 }
 348
 349 /* called before apb_timer_enable, use early map */
 350 unsigned long apbt_quick_calibrate(void)
 351 {
 352         int i, scale;
 353         u64 old, new;
 354         u64 t1, t2;
 355         unsigned long khz = 0;
 356         u32 loop, shift;
 357
 358         apbt_set_mapping();
 359         dw_apb_clocksource_start(clocksource_apbt);
 360
 361         /* check if the timer can count down, otherwise return */
 362         old = dw_apb_clocksource_read(clocksource_apbt);
 363         i = 10000;
 364         while (--i) {
 365                 if (old != dw_apb_clocksource_read(clocksource_apbt))
 366                         break;
 367         }
 368         if (!i)
 369                 goto failed;
 370
 371         /* count 16 ms */
 372         loop = (apbt_freq / 1000) << 4;
 373
 374         /* restart the timer to ensure it won't get to 0 in the calibration */
 375         dw_apb_clocksource_start(clocksource_apbt);
 376
 377         old = dw_apb_clocksource_read(clocksource_apbt);
 378         old += loop;
 379
 380         t1 = rdtsc();
 381
 382         do {
 383                 new = dw_apb_clocksource_read(clocksource_apbt);
 384         } while (new < old);
 385
 386         t2 = rdtsc();
 387
 388         shift = 5;
 389         if (unlikely(loop >> shift == 0)) {
 390                 printk(KERN_INFO
 391                        "APBT TSC calibration failed, not enough resolution\n");
 392                 return 0;
 393         }
 394         scale = (int)div_u64((t2 - t1), loop >> shift);
 395         khz = (scale * (apbt_freq / 1000)) >> shift;
 396         printk(KERN_INFO "TSC freq calculated by APB timer is %lu khz\n", khz);
 397         return khz;
 398 failed:
 399         return 0;
 400 }