1 #include <linux/bootmem.h>
2 #include <linux/linkage.h>
3 #include <linux/bitops.h>
4 #include <linux/kernel.h>
5 #include <linux/module.h>
6 #include <linux/percpu.h>
7 #include <linux/string.h>
8 #include <linux/ctype.h>
9 #include <linux/delay.h>
10 #include <linux/sched.h>
11 #include <linux/init.h>
12 #include <linux/kprobes.h>
13 #include <linux/kgdb.h>
14 #include <linux/smp.h>
16 #include <linux/syscore_ops.h>
18 #include <asm/stackprotector.h>
19 #include <asm/perf_event.h>
20 #include <asm/mmu_context.h>
21 #include <asm/archrandom.h>
22 #include <asm/hypervisor.h>
23 #include <asm/processor.h>
24 #include <asm/tlbflush.h>
25 #include <asm/debugreg.h>
26 #include <asm/sections.h>
27 #include <asm/vsyscall.h>
28 #include <linux/topology.h>
29 #include <linux/cpumask.h>
30 #include <asm/pgtable.h>
31 #include <linux/atomic.h>
32 #include <asm/proto.h>
33 #include <asm/setup.h>
36 #include <asm/fpu/internal.h>
38 #include <linux/numa.h>
44 #include <asm/microcode.h>
45 #include <asm/microcode_intel.h>
47 #ifdef CONFIG_X86_LOCAL_APIC
48 #include <asm/uv/uv.h>
53 /* all of these masks are initialized in setup_cpu_local_masks() */
54 cpumask_var_t cpu_initialized_mask
;
55 cpumask_var_t cpu_callout_mask
;
56 cpumask_var_t cpu_callin_mask
;
58 /* representing cpus for which sibling maps can be computed */
59 cpumask_var_t cpu_sibling_setup_mask
;
61 /* correctly size the local cpu masks */
62 void __init
setup_cpu_local_masks(void)
64 alloc_bootmem_cpumask_var(&cpu_initialized_mask
);
65 alloc_bootmem_cpumask_var(&cpu_callin_mask
);
66 alloc_bootmem_cpumask_var(&cpu_callout_mask
);
67 alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask
);
70 static void default_init(struct cpuinfo_x86
*c
)
73 cpu_detect_cache_sizes(c
);
75 /* Not much we can do here... */
76 /* Check if at least it has cpuid */
77 if (c
->cpuid_level
== -1) {
78 /* No cpuid. It must be an ancient CPU */
80 strcpy(c
->x86_model_id
, "486");
82 strcpy(c
->x86_model_id
, "386");
87 static const struct cpu_dev default_cpu
= {
88 .c_init
= default_init
,
89 .c_vendor
= "Unknown",
90 .c_x86_vendor
= X86_VENDOR_UNKNOWN
,
93 static const struct cpu_dev
*this_cpu
= &default_cpu
;
95 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page
, gdt_page
) = { .gdt
= {
98 * We need valid kernel segments for data and code in long mode too
99 * IRET will check the segment types kkeil 2000/10/28
100 * Also sysret mandates a special GDT layout
102 * TLS descriptors are currently at a different place compared to i386.
103 * Hopefully nobody expects them at a fixed place (Wine?)
105 [GDT_ENTRY_KERNEL32_CS
] = GDT_ENTRY_INIT(0xc09b, 0, 0xfffff),
106 [GDT_ENTRY_KERNEL_CS
] = GDT_ENTRY_INIT(0xa09b, 0, 0xfffff),
107 [GDT_ENTRY_KERNEL_DS
] = GDT_ENTRY_INIT(0xc093, 0, 0xfffff),
108 [GDT_ENTRY_DEFAULT_USER32_CS
] = GDT_ENTRY_INIT(0xc0fb, 0, 0xfffff),
109 [GDT_ENTRY_DEFAULT_USER_DS
] = GDT_ENTRY_INIT(0xc0f3, 0, 0xfffff),
110 [GDT_ENTRY_DEFAULT_USER_CS
] = GDT_ENTRY_INIT(0xa0fb, 0, 0xfffff),
112 [GDT_ENTRY_KERNEL_CS
] = GDT_ENTRY_INIT(0xc09a, 0, 0xfffff),
113 [GDT_ENTRY_KERNEL_DS
] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
114 [GDT_ENTRY_DEFAULT_USER_CS
] = GDT_ENTRY_INIT(0xc0fa, 0, 0xfffff),
115 [GDT_ENTRY_DEFAULT_USER_DS
] = GDT_ENTRY_INIT(0xc0f2, 0, 0xfffff),
117 * Segments used for calling PnP BIOS have byte granularity.
118 * They code segments and data segments have fixed 64k limits,
119 * the transfer segment sizes are set at run time.
122 [GDT_ENTRY_PNPBIOS_CS32
] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
124 [GDT_ENTRY_PNPBIOS_CS16
] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
126 [GDT_ENTRY_PNPBIOS_DS
] = GDT_ENTRY_INIT(0x0092, 0, 0xffff),
128 [GDT_ENTRY_PNPBIOS_TS1
] = GDT_ENTRY_INIT(0x0092, 0, 0),
130 [GDT_ENTRY_PNPBIOS_TS2
] = GDT_ENTRY_INIT(0x0092, 0, 0),
132 * The APM segments have byte granularity and their bases
133 * are set at run time. All have 64k limits.
136 [GDT_ENTRY_APMBIOS_BASE
] = GDT_ENTRY_INIT(0x409a, 0, 0xffff),
138 [GDT_ENTRY_APMBIOS_BASE
+1] = GDT_ENTRY_INIT(0x009a, 0, 0xffff),
140 [GDT_ENTRY_APMBIOS_BASE
+2] = GDT_ENTRY_INIT(0x4092, 0, 0xffff),
142 [GDT_ENTRY_ESPFIX_SS
] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
143 [GDT_ENTRY_PERCPU
] = GDT_ENTRY_INIT(0xc092, 0, 0xfffff),
144 GDT_STACK_CANARY_INIT
147 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page
);
149 static int __init
x86_mpx_setup(char *s
)
151 /* require an exact match without trailing characters */
155 /* do not emit a message if the feature is not present */
156 if (!boot_cpu_has(X86_FEATURE_MPX
))
159 setup_clear_cpu_cap(X86_FEATURE_MPX
);
160 pr_info("nompx: Intel Memory Protection Extensions (MPX) disabled\n");
163 __setup("nompx", x86_mpx_setup
);
166 static int cachesize_override
= -1;
167 static int disable_x86_serial_nr
= 1;
169 static int __init
cachesize_setup(char *str
)
171 get_option(&str
, &cachesize_override
);
174 __setup("cachesize=", cachesize_setup
);
176 static int __init
x86_sep_setup(char *s
)
178 setup_clear_cpu_cap(X86_FEATURE_SEP
);
181 __setup("nosep", x86_sep_setup
);
183 /* Standard macro to see if a specific flag is changeable */
184 static inline int flag_is_changeable_p(u32 flag
)
189 * Cyrix and IDT cpus allow disabling of CPUID
190 * so the code below may return different results
191 * when it is executed before and after enabling
192 * the CPUID. Add "volatile" to not allow gcc to
193 * optimize the subsequent calls to this function.
195 asm volatile ("pushfl \n\t"
206 : "=&r" (f1
), "=&r" (f2
)
209 return ((f1
^f2
) & flag
) != 0;
212 /* Probe for the CPUID instruction */
213 int have_cpuid_p(void)
215 return flag_is_changeable_p(X86_EFLAGS_ID
);
218 static void squash_the_stupid_serial_number(struct cpuinfo_x86
*c
)
220 unsigned long lo
, hi
;
222 if (!cpu_has(c
, X86_FEATURE_PN
) || !disable_x86_serial_nr
)
225 /* Disable processor serial number: */
227 rdmsr(MSR_IA32_BBL_CR_CTL
, lo
, hi
);
229 wrmsr(MSR_IA32_BBL_CR_CTL
, lo
, hi
);
231 printk(KERN_NOTICE
"CPU serial number disabled.\n");
232 clear_cpu_cap(c
, X86_FEATURE_PN
);
234 /* Disabling the serial number may affect the cpuid level */
235 c
->cpuid_level
= cpuid_eax(0);
238 static int __init
x86_serial_nr_setup(char *s
)
240 disable_x86_serial_nr
= 0;
243 __setup("serialnumber", x86_serial_nr_setup
);
245 static inline int flag_is_changeable_p(u32 flag
)
249 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86
*c
)
254 static __init
int setup_disable_smep(char *arg
)
256 setup_clear_cpu_cap(X86_FEATURE_SMEP
);
259 __setup("nosmep", setup_disable_smep
);
261 static __always_inline
void setup_smep(struct cpuinfo_x86
*c
)
263 if (cpu_has(c
, X86_FEATURE_SMEP
))
264 cr4_set_bits(X86_CR4_SMEP
);
267 static __init
int setup_disable_smap(char *arg
)
269 setup_clear_cpu_cap(X86_FEATURE_SMAP
);
272 __setup("nosmap", setup_disable_smap
);
274 static __always_inline
void setup_smap(struct cpuinfo_x86
*c
)
276 unsigned long eflags
= native_save_fl();
278 /* This should have been cleared long ago */
279 BUG_ON(eflags
& X86_EFLAGS_AC
);
281 if (cpu_has(c
, X86_FEATURE_SMAP
)) {
282 #ifdef CONFIG_X86_SMAP
283 cr4_set_bits(X86_CR4_SMAP
);
285 cr4_clear_bits(X86_CR4_SMAP
);
291 * Some CPU features depend on higher CPUID levels, which may not always
292 * be available due to CPUID level capping or broken virtualization
293 * software. Add those features to this table to auto-disable them.
295 struct cpuid_dependent_feature
{
300 static const struct cpuid_dependent_feature
301 cpuid_dependent_features
[] = {
302 { X86_FEATURE_MWAIT
, 0x00000005 },
303 { X86_FEATURE_DCA
, 0x00000009 },
304 { X86_FEATURE_XSAVE
, 0x0000000d },
308 static void filter_cpuid_features(struct cpuinfo_x86
*c
, bool warn
)
310 const struct cpuid_dependent_feature
*df
;
312 for (df
= cpuid_dependent_features
; df
->feature
; df
++) {
314 if (!cpu_has(c
, df
->feature
))
317 * Note: cpuid_level is set to -1 if unavailable, but
318 * extended_extended_level is set to 0 if unavailable
319 * and the legitimate extended levels are all negative
320 * when signed; hence the weird messing around with
323 if (!((s32
)df
->level
< 0 ?
324 (u32
)df
->level
> (u32
)c
->extended_cpuid_level
:
325 (s32
)df
->level
> (s32
)c
->cpuid_level
))
328 clear_cpu_cap(c
, df
->feature
);
333 "CPU: CPU feature " X86_CAP_FMT
" disabled, no CPUID level 0x%x\n",
334 x86_cap_flag(df
->feature
), df
->level
);
339 * Naming convention should be: <Name> [(<Codename>)]
340 * This table only is used unless init_<vendor>() below doesn't set it;
341 * in particular, if CPUID levels 0x80000002..4 are supported, this
345 /* Look up CPU names by table lookup. */
346 static const char *table_lookup_model(struct cpuinfo_x86
*c
)
349 const struct legacy_cpu_model_info
*info
;
351 if (c
->x86_model
>= 16)
352 return NULL
; /* Range check */
357 info
= this_cpu
->legacy_models
;
359 while (info
->family
) {
360 if (info
->family
== c
->x86
)
361 return info
->model_names
[c
->x86_model
];
365 return NULL
; /* Not found */
368 __u32 cpu_caps_cleared
[NCAPINTS
];
369 __u32 cpu_caps_set
[NCAPINTS
];
371 void load_percpu_segment(int cpu
)
374 loadsegment(fs
, __KERNEL_PERCPU
);
377 wrmsrl(MSR_GS_BASE
, (unsigned long)per_cpu(irq_stack_union
.gs_base
, cpu
));
379 load_stack_canary_segment();
383 * Current gdt points %fs at the "master" per-cpu area: after this,
384 * it's on the real one.
386 void switch_to_new_gdt(int cpu
)
388 struct desc_ptr gdt_descr
;
390 gdt_descr
.address
= (long)get_cpu_gdt_table(cpu
);
391 gdt_descr
.size
= GDT_SIZE
- 1;
392 load_gdt(&gdt_descr
);
393 /* Reload the per-cpu base */
395 load_percpu_segment(cpu
);
398 static const struct cpu_dev
*cpu_devs
[X86_VENDOR_NUM
] = {};
400 static void get_model_name(struct cpuinfo_x86
*c
)
405 if (c
->extended_cpuid_level
< 0x80000004)
408 v
= (unsigned int *)c
->x86_model_id
;
409 cpuid(0x80000002, &v
[0], &v
[1], &v
[2], &v
[3]);
410 cpuid(0x80000003, &v
[4], &v
[5], &v
[6], &v
[7]);
411 cpuid(0x80000004, &v
[8], &v
[9], &v
[10], &v
[11]);
412 c
->x86_model_id
[48] = 0;
414 /* Trim whitespace */
415 p
= q
= s
= &c
->x86_model_id
[0];
421 /* Note the last non-whitespace index */
431 void cpu_detect_cache_sizes(struct cpuinfo_x86
*c
)
433 unsigned int n
, dummy
, ebx
, ecx
, edx
, l2size
;
435 n
= c
->extended_cpuid_level
;
437 if (n
>= 0x80000005) {
438 cpuid(0x80000005, &dummy
, &ebx
, &ecx
, &edx
);
439 c
->x86_cache_size
= (ecx
>>24) + (edx
>>24);
441 /* On K8 L1 TLB is inclusive, so don't count it */
446 if (n
< 0x80000006) /* Some chips just has a large L1. */
449 cpuid(0x80000006, &dummy
, &ebx
, &ecx
, &edx
);
453 c
->x86_tlbsize
+= ((ebx
>> 16) & 0xfff) + (ebx
& 0xfff);
455 /* do processor-specific cache resizing */
456 if (this_cpu
->legacy_cache_size
)
457 l2size
= this_cpu
->legacy_cache_size(c
, l2size
);
459 /* Allow user to override all this if necessary. */
460 if (cachesize_override
!= -1)
461 l2size
= cachesize_override
;
464 return; /* Again, no L2 cache is possible */
467 c
->x86_cache_size
= l2size
;
470 u16 __read_mostly tlb_lli_4k
[NR_INFO
];
471 u16 __read_mostly tlb_lli_2m
[NR_INFO
];
472 u16 __read_mostly tlb_lli_4m
[NR_INFO
];
473 u16 __read_mostly tlb_lld_4k
[NR_INFO
];
474 u16 __read_mostly tlb_lld_2m
[NR_INFO
];
475 u16 __read_mostly tlb_lld_4m
[NR_INFO
];
476 u16 __read_mostly tlb_lld_1g
[NR_INFO
];
478 static void cpu_detect_tlb(struct cpuinfo_x86
*c
)
480 if (this_cpu
->c_detect_tlb
)
481 this_cpu
->c_detect_tlb(c
);
483 pr_info("Last level iTLB entries: 4KB %d, 2MB %d, 4MB %d\n",
484 tlb_lli_4k
[ENTRIES
], tlb_lli_2m
[ENTRIES
],
485 tlb_lli_4m
[ENTRIES
]);
487 pr_info("Last level dTLB entries: 4KB %d, 2MB %d, 4MB %d, 1GB %d\n",
488 tlb_lld_4k
[ENTRIES
], tlb_lld_2m
[ENTRIES
],
489 tlb_lld_4m
[ENTRIES
], tlb_lld_1g
[ENTRIES
]);
492 void detect_ht(struct cpuinfo_x86
*c
)
495 u32 eax
, ebx
, ecx
, edx
;
496 int index_msb
, core_bits
;
499 if (!cpu_has(c
, X86_FEATURE_HT
))
502 if (cpu_has(c
, X86_FEATURE_CMP_LEGACY
))
505 if (cpu_has(c
, X86_FEATURE_XTOPOLOGY
))
508 cpuid(1, &eax
, &ebx
, &ecx
, &edx
);
510 smp_num_siblings
= (ebx
& 0xff0000) >> 16;
512 if (smp_num_siblings
== 1) {
513 printk_once(KERN_INFO
"CPU0: Hyper-Threading is disabled\n");
517 if (smp_num_siblings
<= 1)
520 index_msb
= get_count_order(smp_num_siblings
);
521 c
->phys_proc_id
= apic
->phys_pkg_id(c
->initial_apicid
, index_msb
);
523 smp_num_siblings
= smp_num_siblings
/ c
->x86_max_cores
;
525 index_msb
= get_count_order(smp_num_siblings
);
527 core_bits
= get_count_order(c
->x86_max_cores
);
529 c
->cpu_core_id
= apic
->phys_pkg_id(c
->initial_apicid
, index_msb
) &
530 ((1 << core_bits
) - 1);
533 if (!printed
&& (c
->x86_max_cores
* smp_num_siblings
) > 1) {
534 printk(KERN_INFO
"CPU: Physical Processor ID: %d\n",
536 printk(KERN_INFO
"CPU: Processor Core ID: %d\n",
543 static void get_cpu_vendor(struct cpuinfo_x86
*c
)
545 char *v
= c
->x86_vendor_id
;
548 for (i
= 0; i
< X86_VENDOR_NUM
; i
++) {
552 if (!strcmp(v
, cpu_devs
[i
]->c_ident
[0]) ||
553 (cpu_devs
[i
]->c_ident
[1] &&
554 !strcmp(v
, cpu_devs
[i
]->c_ident
[1]))) {
556 this_cpu
= cpu_devs
[i
];
557 c
->x86_vendor
= this_cpu
->c_x86_vendor
;
563 "CPU: vendor_id '%s' unknown, using generic init.\n" \
564 "CPU: Your system may be unstable.\n", v
);
566 c
->x86_vendor
= X86_VENDOR_UNKNOWN
;
567 this_cpu
= &default_cpu
;
570 void cpu_detect(struct cpuinfo_x86
*c
)
572 /* Get vendor name */
573 cpuid(0x00000000, (unsigned int *)&c
->cpuid_level
,
574 (unsigned int *)&c
->x86_vendor_id
[0],
575 (unsigned int *)&c
->x86_vendor_id
[8],
576 (unsigned int *)&c
->x86_vendor_id
[4]);
579 /* Intel-defined flags: level 0x00000001 */
580 if (c
->cpuid_level
>= 0x00000001) {
581 u32 junk
, tfms
, cap0
, misc
;
583 cpuid(0x00000001, &tfms
, &misc
, &junk
, &cap0
);
584 c
->x86
= (tfms
>> 8) & 0xf;
585 c
->x86_model
= (tfms
>> 4) & 0xf;
586 c
->x86_mask
= tfms
& 0xf;
589 c
->x86
+= (tfms
>> 20) & 0xff;
591 c
->x86_model
+= ((tfms
>> 16) & 0xf) << 4;
593 if (cap0
& (1<<19)) {
594 c
->x86_clflush_size
= ((misc
>> 8) & 0xff) * 8;
595 c
->x86_cache_alignment
= c
->x86_clflush_size
;
600 void get_cpu_cap(struct cpuinfo_x86
*c
)
605 /* Intel-defined flags: level 0x00000001 */
606 if (c
->cpuid_level
>= 0x00000001) {
607 u32 capability
, excap
;
609 cpuid(0x00000001, &tfms
, &ebx
, &excap
, &capability
);
610 c
->x86_capability
[0] = capability
;
611 c
->x86_capability
[4] = excap
;
614 /* Additional Intel-defined flags: level 0x00000007 */
615 if (c
->cpuid_level
>= 0x00000007) {
616 u32 eax
, ebx
, ecx
, edx
;
618 cpuid_count(0x00000007, 0, &eax
, &ebx
, &ecx
, &edx
);
620 c
->x86_capability
[9] = ebx
;
623 /* Extended state features: level 0x0000000d */
624 if (c
->cpuid_level
>= 0x0000000d) {
625 u32 eax
, ebx
, ecx
, edx
;
627 cpuid_count(0x0000000d, 1, &eax
, &ebx
, &ecx
, &edx
);
629 c
->x86_capability
[10] = eax
;
632 /* Additional Intel-defined flags: level 0x0000000F */
633 if (c
->cpuid_level
>= 0x0000000F) {
634 u32 eax
, ebx
, ecx
, edx
;
636 /* QoS sub-leaf, EAX=0Fh, ECX=0 */
637 cpuid_count(0x0000000F, 0, &eax
, &ebx
, &ecx
, &edx
);
638 c
->x86_capability
[11] = edx
;
639 if (cpu_has(c
, X86_FEATURE_CQM_LLC
)) {
640 /* will be overridden if occupancy monitoring exists */
641 c
->x86_cache_max_rmid
= ebx
;
643 /* QoS sub-leaf, EAX=0Fh, ECX=1 */
644 cpuid_count(0x0000000F, 1, &eax
, &ebx
, &ecx
, &edx
);
645 c
->x86_capability
[12] = edx
;
646 if (cpu_has(c
, X86_FEATURE_CQM_OCCUP_LLC
)) {
647 c
->x86_cache_max_rmid
= ecx
;
648 c
->x86_cache_occ_scale
= ebx
;
651 c
->x86_cache_max_rmid
= -1;
652 c
->x86_cache_occ_scale
= -1;
656 /* AMD-defined flags: level 0x80000001 */
657 xlvl
= cpuid_eax(0x80000000);
658 c
->extended_cpuid_level
= xlvl
;
660 if ((xlvl
& 0xffff0000) == 0x80000000) {
661 if (xlvl
>= 0x80000001) {
662 c
->x86_capability
[1] = cpuid_edx(0x80000001);
663 c
->x86_capability
[6] = cpuid_ecx(0x80000001);
667 if (c
->extended_cpuid_level
>= 0x80000008) {
668 u32 eax
= cpuid_eax(0x80000008);
670 c
->x86_virt_bits
= (eax
>> 8) & 0xff;
671 c
->x86_phys_bits
= eax
& 0xff;
672 c
->x86_capability
[13] = cpuid_ebx(0x80000008);
675 else if (cpu_has(c
, X86_FEATURE_PAE
) || cpu_has(c
, X86_FEATURE_PSE36
))
676 c
->x86_phys_bits
= 36;
679 if (c
->extended_cpuid_level
>= 0x80000007)
680 c
->x86_power
= cpuid_edx(0x80000007);
682 init_scattered_cpuid_features(c
);
685 static void identify_cpu_without_cpuid(struct cpuinfo_x86
*c
)
691 * First of all, decide if this is a 486 or higher
692 * It's a 486 if we can modify the AC flag
694 if (flag_is_changeable_p(X86_EFLAGS_AC
))
699 for (i
= 0; i
< X86_VENDOR_NUM
; i
++)
700 if (cpu_devs
[i
] && cpu_devs
[i
]->c_identify
) {
701 c
->x86_vendor_id
[0] = 0;
702 cpu_devs
[i
]->c_identify(c
);
703 if (c
->x86_vendor_id
[0]) {
712 * Do minimum CPU detection early.
713 * Fields really needed: vendor, cpuid_level, family, model, mask,
715 * The others are not touched to avoid unwanted side effects.
717 * WARNING: this function is only called on the BP. Don't add code here
718 * that is supposed to run on all CPUs.
720 static void __init
early_identify_cpu(struct cpuinfo_x86
*c
)
723 c
->x86_clflush_size
= 64;
724 c
->x86_phys_bits
= 36;
725 c
->x86_virt_bits
= 48;
727 c
->x86_clflush_size
= 32;
728 c
->x86_phys_bits
= 32;
729 c
->x86_virt_bits
= 32;
731 c
->x86_cache_alignment
= c
->x86_clflush_size
;
733 memset(&c
->x86_capability
, 0, sizeof c
->x86_capability
);
734 c
->extended_cpuid_level
= 0;
737 identify_cpu_without_cpuid(c
);
739 /* cyrix could have cpuid enabled via c_identify()*/
747 if (this_cpu
->c_early_init
)
748 this_cpu
->c_early_init(c
);
751 filter_cpuid_features(c
, false);
753 if (this_cpu
->c_bsp_init
)
754 this_cpu
->c_bsp_init(c
);
756 setup_force_cpu_cap(X86_FEATURE_ALWAYS
);
760 void __init
early_cpu_init(void)
762 const struct cpu_dev
*const *cdev
;
765 #ifdef CONFIG_PROCESSOR_SELECT
766 printk(KERN_INFO
"KERNEL supported cpus:\n");
769 for (cdev
= __x86_cpu_dev_start
; cdev
< __x86_cpu_dev_end
; cdev
++) {
770 const struct cpu_dev
*cpudev
= *cdev
;
772 if (count
>= X86_VENDOR_NUM
)
774 cpu_devs
[count
] = cpudev
;
777 #ifdef CONFIG_PROCESSOR_SELECT
781 for (j
= 0; j
< 2; j
++) {
782 if (!cpudev
->c_ident
[j
])
784 printk(KERN_INFO
" %s %s\n", cpudev
->c_vendor
,
790 early_identify_cpu(&boot_cpu_data
);
794 * The NOPL instruction is supposed to exist on all CPUs of family >= 6;
795 * unfortunately, that's not true in practice because of early VIA
796 * chips and (more importantly) broken virtualizers that are not easy
797 * to detect. In the latter case it doesn't even *fail* reliably, so
798 * probing for it doesn't even work. Disable it completely on 32-bit
799 * unless we can find a reliable way to detect all the broken cases.
800 * Enable it explicitly on 64-bit for non-constant inputs of cpu_has().
802 static void detect_nopl(struct cpuinfo_x86
*c
)
805 clear_cpu_cap(c
, X86_FEATURE_NOPL
);
807 set_cpu_cap(c
, X86_FEATURE_NOPL
);
811 static void generic_identify(struct cpuinfo_x86
*c
)
813 c
->extended_cpuid_level
= 0;
816 identify_cpu_without_cpuid(c
);
818 /* cyrix could have cpuid enabled via c_identify()*/
828 if (c
->cpuid_level
>= 0x00000001) {
829 c
->initial_apicid
= (cpuid_ebx(1) >> 24) & 0xFF;
832 c
->apicid
= apic
->phys_pkg_id(c
->initial_apicid
, 0);
834 c
->apicid
= c
->initial_apicid
;
837 c
->phys_proc_id
= c
->initial_apicid
;
840 get_model_name(c
); /* Default name */
845 static void x86_init_cache_qos(struct cpuinfo_x86
*c
)
848 * The heavy lifting of max_rmid and cache_occ_scale are handled
849 * in get_cpu_cap(). Here we just set the max_rmid for the boot_cpu
850 * in case CQM bits really aren't there in this CPU.
852 if (c
!= &boot_cpu_data
) {
853 boot_cpu_data
.x86_cache_max_rmid
=
854 min(boot_cpu_data
.x86_cache_max_rmid
,
855 c
->x86_cache_max_rmid
);
860 * This does the hard work of actually picking apart the CPU stuff...
862 static void identify_cpu(struct cpuinfo_x86
*c
)
866 c
->loops_per_jiffy
= loops_per_jiffy
;
867 c
->x86_cache_size
= -1;
868 c
->x86_vendor
= X86_VENDOR_UNKNOWN
;
869 c
->x86_model
= c
->x86_mask
= 0; /* So far unknown... */
870 c
->x86_vendor_id
[0] = '\0'; /* Unset */
871 c
->x86_model_id
[0] = '\0'; /* Unset */
872 c
->x86_max_cores
= 1;
873 c
->x86_coreid_bits
= 0;
875 c
->x86_clflush_size
= 64;
876 c
->x86_phys_bits
= 36;
877 c
->x86_virt_bits
= 48;
879 c
->cpuid_level
= -1; /* CPUID not detected */
880 c
->x86_clflush_size
= 32;
881 c
->x86_phys_bits
= 32;
882 c
->x86_virt_bits
= 32;
884 c
->x86_cache_alignment
= c
->x86_clflush_size
;
885 memset(&c
->x86_capability
, 0, sizeof c
->x86_capability
);
889 if (this_cpu
->c_identify
)
890 this_cpu
->c_identify(c
);
892 /* Clear/Set all flags overriden by options, after probe */
893 for (i
= 0; i
< NCAPINTS
; i
++) {
894 c
->x86_capability
[i
] &= ~cpu_caps_cleared
[i
];
895 c
->x86_capability
[i
] |= cpu_caps_set
[i
];
899 c
->apicid
= apic
->phys_pkg_id(c
->initial_apicid
, 0);
903 * Vendor-specific initialization. In this section we
904 * canonicalize the feature flags, meaning if there are
905 * features a certain CPU supports which CPUID doesn't
906 * tell us, CPUID claiming incorrect flags, or other bugs,
907 * we handle them here.
909 * At the end of this section, c->x86_capability better
910 * indicate the features this CPU genuinely supports!
912 if (this_cpu
->c_init
)
915 /* Disable the PN if appropriate */
916 squash_the_stupid_serial_number(c
);
918 /* Set up SMEP/SMAP */
923 * The vendor-specific functions might have changed features.
924 * Now we do "generic changes."
927 /* Filter out anything that depends on CPUID levels we don't have */
928 filter_cpuid_features(c
, true);
930 /* If the model name is still unset, do table lookup. */
931 if (!c
->x86_model_id
[0]) {
933 p
= table_lookup_model(c
);
935 strcpy(c
->x86_model_id
, p
);
938 sprintf(c
->x86_model_id
, "%02x/%02x",
939 c
->x86
, c
->x86_model
);
948 x86_init_cache_qos(c
);
951 * Clear/Set all flags overriden by options, need do it
952 * before following smp all cpus cap AND.
954 for (i
= 0; i
< NCAPINTS
; i
++) {
955 c
->x86_capability
[i
] &= ~cpu_caps_cleared
[i
];
956 c
->x86_capability
[i
] |= cpu_caps_set
[i
];
960 * On SMP, boot_cpu_data holds the common feature set between
961 * all CPUs; so make sure that we indicate which features are
962 * common between the CPUs. The first time this routine gets
963 * executed, c == &boot_cpu_data.
965 if (c
!= &boot_cpu_data
) {
966 /* AND the already accumulated flags with these */
967 for (i
= 0; i
< NCAPINTS
; i
++)
968 boot_cpu_data
.x86_capability
[i
] &= c
->x86_capability
[i
];
970 /* OR, i.e. replicate the bug flags */
971 for (i
= NCAPINTS
; i
< NCAPINTS
+ NBUGINTS
; i
++)
972 c
->x86_capability
[i
] |= boot_cpu_data
.x86_capability
[i
];
975 /* Init Machine Check Exception if available. */
978 select_idle_routine(c
);
981 numa_add_cpu(smp_processor_id());
986 * Set up the CPU state needed to execute SYSENTER/SYSEXIT instructions
990 void enable_sep_cpu(void)
992 struct tss_struct
*tss
;
996 tss
= &per_cpu(cpu_tss
, cpu
);
998 if (!boot_cpu_has(X86_FEATURE_SEP
))
1002 * We cache MSR_IA32_SYSENTER_CS's value in the TSS's ss1 field --
1003 * see the big comment in struct x86_hw_tss's definition.
1006 tss
->x86_tss
.ss1
= __KERNEL_CS
;
1007 wrmsr(MSR_IA32_SYSENTER_CS
, tss
->x86_tss
.ss1
, 0);
1009 wrmsr(MSR_IA32_SYSENTER_ESP
,
1010 (unsigned long)tss
+ offsetofend(struct tss_struct
, SYSENTER_stack
),
1013 wrmsr(MSR_IA32_SYSENTER_EIP
, (unsigned long)entry_SYSENTER_32
, 0);
1020 void __init
identify_boot_cpu(void)
1022 identify_cpu(&boot_cpu_data
);
1023 init_amd_e400_c1e_mask();
1024 #ifdef CONFIG_X86_32
1028 cpu_detect_tlb(&boot_cpu_data
);
1031 void identify_secondary_cpu(struct cpuinfo_x86
*c
)
1033 BUG_ON(c
== &boot_cpu_data
);
1035 #ifdef CONFIG_X86_32
1046 static const struct msr_range msr_range_array
[] = {
1047 { 0x00000000, 0x00000418},
1048 { 0xc0000000, 0xc000040b},
1049 { 0xc0010000, 0xc0010142},
1050 { 0xc0011000, 0xc001103b},
1053 static void __print_cpu_msr(void)
1055 unsigned index_min
, index_max
;
1060 for (i
= 0; i
< ARRAY_SIZE(msr_range_array
); i
++) {
1061 index_min
= msr_range_array
[i
].min
;
1062 index_max
= msr_range_array
[i
].max
;
1064 for (index
= index_min
; index
< index_max
; index
++) {
1065 if (rdmsrl_safe(index
, &val
))
1067 printk(KERN_INFO
" MSR%08x: %016llx\n", index
, val
);
1072 static int show_msr
;
1074 static __init
int setup_show_msr(char *arg
)
1078 get_option(&arg
, &num
);
1084 __setup("show_msr=", setup_show_msr
);
1086 static __init
int setup_noclflush(char *arg
)
1088 setup_clear_cpu_cap(X86_FEATURE_CLFLUSH
);
1089 setup_clear_cpu_cap(X86_FEATURE_CLFLUSHOPT
);
1092 __setup("noclflush", setup_noclflush
);
1094 void print_cpu_info(struct cpuinfo_x86
*c
)
1096 const char *vendor
= NULL
;
1098 if (c
->x86_vendor
< X86_VENDOR_NUM
) {
1099 vendor
= this_cpu
->c_vendor
;
1101 if (c
->cpuid_level
>= 0)
1102 vendor
= c
->x86_vendor_id
;
1105 if (vendor
&& !strstr(c
->x86_model_id
, vendor
))
1106 printk(KERN_CONT
"%s ", vendor
);
1108 if (c
->x86_model_id
[0])
1109 printk(KERN_CONT
"%s", c
->x86_model_id
);
1111 printk(KERN_CONT
"%d86", c
->x86
);
1113 printk(KERN_CONT
" (family: 0x%x, model: 0x%x", c
->x86
, c
->x86_model
);
1115 if (c
->x86_mask
|| c
->cpuid_level
>= 0)
1116 printk(KERN_CONT
", stepping: 0x%x)\n", c
->x86_mask
);
1118 printk(KERN_CONT
")\n");
1123 void print_cpu_msr(struct cpuinfo_x86
*c
)
1125 if (c
->cpu_index
< show_msr
)
1129 static __init
int setup_disablecpuid(char *arg
)
1133 if (get_option(&arg
, &bit
) && bit
< NCAPINTS
*32)
1134 setup_clear_cpu_cap(bit
);
1140 __setup("clearcpuid=", setup_disablecpuid
);
1142 #ifdef CONFIG_X86_64
1143 struct desc_ptr idt_descr
= { NR_VECTORS
* 16 - 1, (unsigned long) idt_table
};
1144 struct desc_ptr debug_idt_descr
= { NR_VECTORS
* 16 - 1,
1145 (unsigned long) debug_idt_table
};
1147 DEFINE_PER_CPU_FIRST(union irq_stack_union
,
1148 irq_stack_union
) __aligned(PAGE_SIZE
) __visible
;
1151 * The following percpu variables are hot. Align current_task to
1152 * cacheline size such that they fall in the same cacheline.
1154 DEFINE_PER_CPU(struct task_struct
*, current_task
) ____cacheline_aligned
=
1156 EXPORT_PER_CPU_SYMBOL(current_task
);
1158 DEFINE_PER_CPU(char *, irq_stack_ptr
) =
1159 init_per_cpu_var(irq_stack_union
.irq_stack
) + IRQ_STACK_SIZE
- 64;
1161 DEFINE_PER_CPU(unsigned int, irq_count
) __visible
= -1;
1163 DEFINE_PER_CPU(int, __preempt_count
) = INIT_PREEMPT_COUNT
;
1164 EXPORT_PER_CPU_SYMBOL(__preempt_count
);
1167 * Special IST stacks which the CPU switches to when it calls
1168 * an IST-marked descriptor entry. Up to 7 stacks (hardware
1169 * limit), all of them are 4K, except the debug stack which
1172 static const unsigned int exception_stack_sizes
[N_EXCEPTION_STACKS
] = {
1173 [0 ... N_EXCEPTION_STACKS
- 1] = EXCEPTION_STKSZ
,
1174 [DEBUG_STACK
- 1] = DEBUG_STKSZ
1177 static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks
1178 [(N_EXCEPTION_STACKS
- 1) * EXCEPTION_STKSZ
+ DEBUG_STKSZ
]);
1180 /* May not be marked __init: used by software suspend */
1181 void syscall_init(void)
1184 * LSTAR and STAR live in a bit strange symbiosis.
1185 * They both write to the same internal register. STAR allows to
1186 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
1188 wrmsrl(MSR_STAR
, ((u64
)__USER32_CS
)<<48 | ((u64
)__KERNEL_CS
)<<32);
1189 wrmsrl(MSR_LSTAR
, (unsigned long)entry_SYSCALL_64
);
1191 #ifdef CONFIG_IA32_EMULATION
1192 wrmsrl(MSR_CSTAR
, (unsigned long)entry_SYSCALL_compat
);
1194 * This only works on Intel CPUs.
1195 * On AMD CPUs these MSRs are 32-bit, CPU truncates MSR_IA32_SYSENTER_EIP.
1196 * This does not cause SYSENTER to jump to the wrong location, because
1197 * AMD doesn't allow SYSENTER in long mode (either 32- or 64-bit).
1199 wrmsrl_safe(MSR_IA32_SYSENTER_CS
, (u64
)__KERNEL_CS
);
1200 wrmsrl_safe(MSR_IA32_SYSENTER_ESP
, 0ULL);
1201 wrmsrl_safe(MSR_IA32_SYSENTER_EIP
, (u64
)entry_SYSENTER_compat
);
1203 wrmsrl(MSR_CSTAR
, (unsigned long)ignore_sysret
);
1204 wrmsrl_safe(MSR_IA32_SYSENTER_CS
, (u64
)GDT_ENTRY_INVALID_SEG
);
1205 wrmsrl_safe(MSR_IA32_SYSENTER_ESP
, 0ULL);
1206 wrmsrl_safe(MSR_IA32_SYSENTER_EIP
, 0ULL);
1209 /* Flags to clear on syscall */
1210 wrmsrl(MSR_SYSCALL_MASK
,
1211 X86_EFLAGS_TF
|X86_EFLAGS_DF
|X86_EFLAGS_IF
|
1212 X86_EFLAGS_IOPL
|X86_EFLAGS_AC
|X86_EFLAGS_NT
);
1216 * Copies of the original ist values from the tss are only accessed during
1217 * debugging, no special alignment required.
1219 DEFINE_PER_CPU(struct orig_ist
, orig_ist
);
1221 static DEFINE_PER_CPU(unsigned long, debug_stack_addr
);
1222 DEFINE_PER_CPU(int, debug_stack_usage
);
1224 int is_debug_stack(unsigned long addr
)
1226 return __this_cpu_read(debug_stack_usage
) ||
1227 (addr
<= __this_cpu_read(debug_stack_addr
) &&
1228 addr
> (__this_cpu_read(debug_stack_addr
) - DEBUG_STKSZ
));
1230 NOKPROBE_SYMBOL(is_debug_stack
);
1232 DEFINE_PER_CPU(u32
, debug_idt_ctr
);
1234 void debug_stack_set_zero(void)
1236 this_cpu_inc(debug_idt_ctr
);
1239 NOKPROBE_SYMBOL(debug_stack_set_zero
);
1241 void debug_stack_reset(void)
1243 if (WARN_ON(!this_cpu_read(debug_idt_ctr
)))
1245 if (this_cpu_dec_return(debug_idt_ctr
) == 0)
1248 NOKPROBE_SYMBOL(debug_stack_reset
);
1250 #else /* CONFIG_X86_64 */
1252 DEFINE_PER_CPU(struct task_struct
*, current_task
) = &init_task
;
1253 EXPORT_PER_CPU_SYMBOL(current_task
);
1254 DEFINE_PER_CPU(int, __preempt_count
) = INIT_PREEMPT_COUNT
;
1255 EXPORT_PER_CPU_SYMBOL(__preempt_count
);
1258 * On x86_32, vm86 modifies tss.sp0, so sp0 isn't a reliable way to find
1259 * the top of the kernel stack. Use an extra percpu variable to track the
1260 * top of the kernel stack directly.
1262 DEFINE_PER_CPU(unsigned long, cpu_current_top_of_stack
) =
1263 (unsigned long)&init_thread_union
+ THREAD_SIZE
;
1264 EXPORT_PER_CPU_SYMBOL(cpu_current_top_of_stack
);
1266 #ifdef CONFIG_CC_STACKPROTECTOR
1267 DEFINE_PER_CPU_ALIGNED(struct stack_canary
, stack_canary
);
1270 #endif /* CONFIG_X86_64 */
1273 * Clear all 6 debug registers:
1275 static void clear_all_debug_regs(void)
1279 for (i
= 0; i
< 8; i
++) {
1280 /* Ignore db4, db5 */
1281 if ((i
== 4) || (i
== 5))
1290 * Restore debug regs if using kgdbwait and you have a kernel debugger
1291 * connection established.
1293 static void dbg_restore_debug_regs(void)
1295 if (unlikely(kgdb_connected
&& arch_kgdb_ops
.correct_hw_break
))
1296 arch_kgdb_ops
.correct_hw_break();
1298 #else /* ! CONFIG_KGDB */
1299 #define dbg_restore_debug_regs()
1300 #endif /* ! CONFIG_KGDB */
1302 static void wait_for_master_cpu(int cpu
)
1306 * wait for ACK from master CPU before continuing
1307 * with AP initialization
1309 WARN_ON(cpumask_test_and_set_cpu(cpu
, cpu_initialized_mask
));
1310 while (!cpumask_test_cpu(cpu
, cpu_callout_mask
))
1316 * cpu_init() initializes state that is per-CPU. Some data is already
1317 * initialized (naturally) in the bootstrap process, such as the GDT
1318 * and IDT. We reload them nevertheless, this function acts as a
1319 * 'CPU state barrier', nothing should get across.
1320 * A lot of state is already set up in PDA init for 64 bit
1322 #ifdef CONFIG_X86_64
1326 struct orig_ist
*oist
;
1327 struct task_struct
*me
;
1328 struct tss_struct
*t
;
1330 int cpu
= stack_smp_processor_id();
1333 wait_for_master_cpu(cpu
);
1336 * Initialize the CR4 shadow before doing anything that could
1342 * Load microcode on this cpu if a valid microcode is available.
1343 * This is early microcode loading procedure.
1347 t
= &per_cpu(cpu_tss
, cpu
);
1348 oist
= &per_cpu(orig_ist
, cpu
);
1351 if (this_cpu_read(numa_node
) == 0 &&
1352 early_cpu_to_node(cpu
) != NUMA_NO_NODE
)
1353 set_numa_node(early_cpu_to_node(cpu
));
1358 pr_debug("Initializing CPU#%d\n", cpu
);
1360 cr4_clear_bits(X86_CR4_VME
|X86_CR4_PVI
|X86_CR4_TSD
|X86_CR4_DE
);
1363 * Initialize the per-CPU GDT with the boot GDT,
1364 * and set up the GDT descriptor:
1367 switch_to_new_gdt(cpu
);
1372 memset(me
->thread
.tls_array
, 0, GDT_ENTRY_TLS_ENTRIES
* 8);
1375 wrmsrl(MSR_FS_BASE
, 0);
1376 wrmsrl(MSR_KERNEL_GS_BASE
, 0);
1383 * set up and load the per-CPU TSS
1385 if (!oist
->ist
[0]) {
1386 char *estacks
= per_cpu(exception_stacks
, cpu
);
1388 for (v
= 0; v
< N_EXCEPTION_STACKS
; v
++) {
1389 estacks
+= exception_stack_sizes
[v
];
1390 oist
->ist
[v
] = t
->x86_tss
.ist
[v
] =
1391 (unsigned long)estacks
;
1392 if (v
== DEBUG_STACK
-1)
1393 per_cpu(debug_stack_addr
, cpu
) = (unsigned long)estacks
;
1397 t
->x86_tss
.io_bitmap_base
= offsetof(struct tss_struct
, io_bitmap
);
1400 * <= is required because the CPU will access up to
1401 * 8 bits beyond the end of the IO permission bitmap.
1403 for (i
= 0; i
<= IO_BITMAP_LONGS
; i
++)
1404 t
->io_bitmap
[i
] = ~0UL;
1406 atomic_inc(&init_mm
.mm_count
);
1407 me
->active_mm
= &init_mm
;
1409 enter_lazy_tlb(&init_mm
, me
);
1411 load_sp0(t
, ¤t
->thread
);
1412 set_tss_desc(cpu
, t
);
1414 load_mm_ldt(&init_mm
);
1416 clear_all_debug_regs();
1417 dbg_restore_debug_regs();
1429 int cpu
= smp_processor_id();
1430 struct task_struct
*curr
= current
;
1431 struct tss_struct
*t
= &per_cpu(cpu_tss
, cpu
);
1432 struct thread_struct
*thread
= &curr
->thread
;
1434 wait_for_master_cpu(cpu
);
1437 * Initialize the CR4 shadow before doing anything that could
1442 show_ucode_info_early();
1444 printk(KERN_INFO
"Initializing CPU#%d\n", cpu
);
1446 if (cpu_feature_enabled(X86_FEATURE_VME
) || cpu_has_tsc
|| cpu_has_de
)
1447 cr4_clear_bits(X86_CR4_VME
|X86_CR4_PVI
|X86_CR4_TSD
|X86_CR4_DE
);
1450 switch_to_new_gdt(cpu
);
1453 * Set up and load the per-CPU TSS and LDT
1455 atomic_inc(&init_mm
.mm_count
);
1456 curr
->active_mm
= &init_mm
;
1458 enter_lazy_tlb(&init_mm
, curr
);
1460 load_sp0(t
, thread
);
1461 set_tss_desc(cpu
, t
);
1463 load_mm_ldt(&init_mm
);
1465 t
->x86_tss
.io_bitmap_base
= offsetof(struct tss_struct
, io_bitmap
);
1467 #ifdef CONFIG_DOUBLEFAULT
1468 /* Set up doublefault TSS pointer in the GDT */
1469 __set_tss_desc(cpu
, GDT_ENTRY_DOUBLEFAULT_TSS
, &doublefault_tss
);
1472 clear_all_debug_regs();
1473 dbg_restore_debug_regs();
1479 #ifdef CONFIG_X86_DEBUG_STATIC_CPU_HAS
1480 void warn_pre_alternatives(void)
1482 WARN(1, "You're using static_cpu_has before alternatives have run!\n");
1484 EXPORT_SYMBOL_GPL(warn_pre_alternatives
);
1487 inline bool __static_cpu_has_safe(u16 bit
)
1489 return boot_cpu_has(bit
);
1491 EXPORT_SYMBOL_GPL(__static_cpu_has_safe
);
1493 static void bsp_resume(void)
1495 if (this_cpu
->c_bsp_resume
)
1496 this_cpu
->c_bsp_resume(&boot_cpu_data
);
1499 static struct syscore_ops cpu_syscore_ops
= {
1500 .resume
= bsp_resume
,
1503 static int __init
init_cpu_syscore(void)
1505 register_syscore_ops(&cpu_syscore_ops
);
1508 core_initcall(init_cpu_syscore
);