]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - arch/x86/kernel/cpu/common.c
Merge branch 'for-linus' of git://neil.brown.name/md
[mirror_ubuntu-artful-kernel.git] / arch / x86 / kernel / cpu / common.c
1 #include <linux/init.h>
2 #include <linux/kernel.h>
3 #include <linux/sched.h>
4 #include <linux/string.h>
5 #include <linux/bootmem.h>
6 #include <linux/bitops.h>
7 #include <linux/module.h>
8 #include <linux/kgdb.h>
9 #include <linux/topology.h>
10 #include <linux/delay.h>
11 #include <linux/smp.h>
12 #include <linux/percpu.h>
13 #include <asm/i387.h>
14 #include <asm/msr.h>
15 #include <asm/io.h>
16 #include <asm/linkage.h>
17 #include <asm/mmu_context.h>
18 #include <asm/mtrr.h>
19 #include <asm/mce.h>
20 #include <asm/pat.h>
21 #include <asm/asm.h>
22 #include <asm/numa.h>
23 #ifdef CONFIG_X86_LOCAL_APIC
24 #include <asm/mpspec.h>
25 #include <asm/apic.h>
26 #include <mach_apic.h>
27 #include <asm/genapic.h>
28 #endif
29
30 #include <asm/pda.h>
31 #include <asm/pgtable.h>
32 #include <asm/processor.h>
33 #include <asm/desc.h>
34 #include <asm/atomic.h>
35 #include <asm/proto.h>
36 #include <asm/sections.h>
37 #include <asm/setup.h>
38
39 #include "cpu.h"
40
41 static struct cpu_dev *this_cpu __cpuinitdata;
42
43 #ifdef CONFIG_X86_64
44 /* We need valid kernel segments for data and code in long mode too
45 * IRET will check the segment types kkeil 2000/10/28
46 * Also sysret mandates a special GDT layout
47 */
48 /* The TLS descriptors are currently at a different place compared to i386.
49 Hopefully nobody expects them at a fixed place (Wine?) */
50 DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = {
51 [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } },
52 [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } },
53 [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } },
54 [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } },
55 [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } },
56 [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } },
57 } };
58 #else
59 DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = {
60 [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } },
61 [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } },
62 [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } },
63 [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff200 } } },
64 /*
65 * Segments used for calling PnP BIOS have byte granularity.
66 * They code segments and data segments have fixed 64k limits,
67 * the transfer segment sizes are set at run time.
68 */
69 /* 32-bit code */
70 [GDT_ENTRY_PNPBIOS_CS32] = { { { 0x0000ffff, 0x00409a00 } } },
71 /* 16-bit code */
72 [GDT_ENTRY_PNPBIOS_CS16] = { { { 0x0000ffff, 0x00009a00 } } },
73 /* 16-bit data */
74 [GDT_ENTRY_PNPBIOS_DS] = { { { 0x0000ffff, 0x00009200 } } },
75 /* 16-bit data */
76 [GDT_ENTRY_PNPBIOS_TS1] = { { { 0x00000000, 0x00009200 } } },
77 /* 16-bit data */
78 [GDT_ENTRY_PNPBIOS_TS2] = { { { 0x00000000, 0x00009200 } } },
79 /*
80 * The APM segments have byte granularity and their bases
81 * are set at run time. All have 64k limits.
82 */
83 /* 32-bit code */
84 [GDT_ENTRY_APMBIOS_BASE] = { { { 0x0000ffff, 0x00409a00 } } },
85 /* 16-bit code */
86 [GDT_ENTRY_APMBIOS_BASE+1] = { { { 0x0000ffff, 0x00009a00 } } },
87 /* data */
88 [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } },
89
90 [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } },
91 [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } },
92 } };
93 #endif
94 EXPORT_PER_CPU_SYMBOL_GPL(gdt_page);
95
96 #ifdef CONFIG_X86_32
97 static int cachesize_override __cpuinitdata = -1;
98 static int disable_x86_serial_nr __cpuinitdata = 1;
99
100 static int __init cachesize_setup(char *str)
101 {
102 get_option(&str, &cachesize_override);
103 return 1;
104 }
105 __setup("cachesize=", cachesize_setup);
106
107 static int __init x86_fxsr_setup(char *s)
108 {
109 setup_clear_cpu_cap(X86_FEATURE_FXSR);
110 setup_clear_cpu_cap(X86_FEATURE_XMM);
111 return 1;
112 }
113 __setup("nofxsr", x86_fxsr_setup);
114
115 static int __init x86_sep_setup(char *s)
116 {
117 setup_clear_cpu_cap(X86_FEATURE_SEP);
118 return 1;
119 }
120 __setup("nosep", x86_sep_setup);
121
122 /* Standard macro to see if a specific flag is changeable */
123 static inline int flag_is_changeable_p(u32 flag)
124 {
125 u32 f1, f2;
126
127 /*
128 * Cyrix and IDT cpus allow disabling of CPUID
129 * so the code below may return different results
130 * when it is executed before and after enabling
131 * the CPUID. Add "volatile" to not allow gcc to
132 * optimize the subsequent calls to this function.
133 */
134 asm volatile ("pushfl\n\t"
135 "pushfl\n\t"
136 "popl %0\n\t"
137 "movl %0,%1\n\t"
138 "xorl %2,%0\n\t"
139 "pushl %0\n\t"
140 "popfl\n\t"
141 "pushfl\n\t"
142 "popl %0\n\t"
143 "popfl\n\t"
144 : "=&r" (f1), "=&r" (f2)
145 : "ir" (flag));
146
147 return ((f1^f2) & flag) != 0;
148 }
149
150 /* Probe for the CPUID instruction */
151 static int __cpuinit have_cpuid_p(void)
152 {
153 return flag_is_changeable_p(X86_EFLAGS_ID);
154 }
155
156 static void __cpuinit squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
157 {
158 if (cpu_has(c, X86_FEATURE_PN) && disable_x86_serial_nr) {
159 /* Disable processor serial number */
160 unsigned long lo, hi;
161 rdmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
162 lo |= 0x200000;
163 wrmsr(MSR_IA32_BBL_CR_CTL, lo, hi);
164 printk(KERN_NOTICE "CPU serial number disabled.\n");
165 clear_cpu_cap(c, X86_FEATURE_PN);
166
167 /* Disabling the serial number may affect the cpuid level */
168 c->cpuid_level = cpuid_eax(0);
169 }
170 }
171
172 static int __init x86_serial_nr_setup(char *s)
173 {
174 disable_x86_serial_nr = 0;
175 return 1;
176 }
177 __setup("serialnumber", x86_serial_nr_setup);
178 #else
179 static inline int flag_is_changeable_p(u32 flag)
180 {
181 return 1;
182 }
183 /* Probe for the CPUID instruction */
184 static inline int have_cpuid_p(void)
185 {
186 return 1;
187 }
188 static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c)
189 {
190 }
191 #endif
192
193 /*
194 * Naming convention should be: <Name> [(<Codename>)]
195 * This table only is used unless init_<vendor>() below doesn't set it;
196 * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used
197 *
198 */
199
200 /* Look up CPU names by table lookup. */
201 static char __cpuinit *table_lookup_model(struct cpuinfo_x86 *c)
202 {
203 struct cpu_model_info *info;
204
205 if (c->x86_model >= 16)
206 return NULL; /* Range check */
207
208 if (!this_cpu)
209 return NULL;
210
211 info = this_cpu->c_models;
212
213 while (info && info->family) {
214 if (info->family == c->x86)
215 return info->model_names[c->x86_model];
216 info++;
217 }
218 return NULL; /* Not found */
219 }
220
221 __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata;
222
223 /* Current gdt points %fs at the "master" per-cpu area: after this,
224 * it's on the real one. */
225 void switch_to_new_gdt(void)
226 {
227 struct desc_ptr gdt_descr;
228
229 gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id());
230 gdt_descr.size = GDT_SIZE - 1;
231 load_gdt(&gdt_descr);
232 #ifdef CONFIG_X86_32
233 asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory");
234 #endif
235 }
236
237 static struct cpu_dev *cpu_devs[X86_VENDOR_NUM] = {};
238
239 static void __cpuinit default_init(struct cpuinfo_x86 *c)
240 {
241 #ifdef CONFIG_X86_64
242 display_cacheinfo(c);
243 #else
244 /* Not much we can do here... */
245 /* Check if at least it has cpuid */
246 if (c->cpuid_level == -1) {
247 /* No cpuid. It must be an ancient CPU */
248 if (c->x86 == 4)
249 strcpy(c->x86_model_id, "486");
250 else if (c->x86 == 3)
251 strcpy(c->x86_model_id, "386");
252 }
253 #endif
254 }
255
256 static struct cpu_dev __cpuinitdata default_cpu = {
257 .c_init = default_init,
258 .c_vendor = "Unknown",
259 .c_x86_vendor = X86_VENDOR_UNKNOWN,
260 };
261
262 static void __cpuinit get_model_name(struct cpuinfo_x86 *c)
263 {
264 unsigned int *v;
265 char *p, *q;
266
267 if (c->extended_cpuid_level < 0x80000004)
268 return;
269
270 v = (unsigned int *) c->x86_model_id;
271 cpuid(0x80000002, &v[0], &v[1], &v[2], &v[3]);
272 cpuid(0x80000003, &v[4], &v[5], &v[6], &v[7]);
273 cpuid(0x80000004, &v[8], &v[9], &v[10], &v[11]);
274 c->x86_model_id[48] = 0;
275
276 /* Intel chips right-justify this string for some dumb reason;
277 undo that brain damage */
278 p = q = &c->x86_model_id[0];
279 while (*p == ' ')
280 p++;
281 if (p != q) {
282 while (*p)
283 *q++ = *p++;
284 while (q <= &c->x86_model_id[48])
285 *q++ = '\0'; /* Zero-pad the rest */
286 }
287 }
288
289 void __cpuinit display_cacheinfo(struct cpuinfo_x86 *c)
290 {
291 unsigned int n, dummy, ebx, ecx, edx, l2size;
292
293 n = c->extended_cpuid_level;
294
295 if (n >= 0x80000005) {
296 cpuid(0x80000005, &dummy, &ebx, &ecx, &edx);
297 printk(KERN_INFO "CPU: L1 I Cache: %dK (%d bytes/line), D cache %dK (%d bytes/line)\n",
298 edx>>24, edx&0xFF, ecx>>24, ecx&0xFF);
299 c->x86_cache_size = (ecx>>24) + (edx>>24);
300 #ifdef CONFIG_X86_64
301 /* On K8 L1 TLB is inclusive, so don't count it */
302 c->x86_tlbsize = 0;
303 #endif
304 }
305
306 if (n < 0x80000006) /* Some chips just has a large L1. */
307 return;
308
309 cpuid(0x80000006, &dummy, &ebx, &ecx, &edx);
310 l2size = ecx >> 16;
311
312 #ifdef CONFIG_X86_64
313 c->x86_tlbsize += ((ebx >> 16) & 0xfff) + (ebx & 0xfff);
314 #else
315 /* do processor-specific cache resizing */
316 if (this_cpu->c_size_cache)
317 l2size = this_cpu->c_size_cache(c, l2size);
318
319 /* Allow user to override all this if necessary. */
320 if (cachesize_override != -1)
321 l2size = cachesize_override;
322
323 if (l2size == 0)
324 return; /* Again, no L2 cache is possible */
325 #endif
326
327 c->x86_cache_size = l2size;
328
329 printk(KERN_INFO "CPU: L2 Cache: %dK (%d bytes/line)\n",
330 l2size, ecx & 0xFF);
331 }
332
333 void __cpuinit detect_ht(struct cpuinfo_x86 *c)
334 {
335 #ifdef CONFIG_X86_HT
336 u32 eax, ebx, ecx, edx;
337 int index_msb, core_bits;
338
339 if (!cpu_has(c, X86_FEATURE_HT))
340 return;
341
342 if (cpu_has(c, X86_FEATURE_CMP_LEGACY))
343 goto out;
344
345 if (cpu_has(c, X86_FEATURE_XTOPOLOGY))
346 return;
347
348 cpuid(1, &eax, &ebx, &ecx, &edx);
349
350 smp_num_siblings = (ebx & 0xff0000) >> 16;
351
352 if (smp_num_siblings == 1) {
353 printk(KERN_INFO "CPU: Hyper-Threading is disabled\n");
354 } else if (smp_num_siblings > 1) {
355
356 if (smp_num_siblings > NR_CPUS) {
357 printk(KERN_WARNING "CPU: Unsupported number of siblings %d",
358 smp_num_siblings);
359 smp_num_siblings = 1;
360 return;
361 }
362
363 index_msb = get_count_order(smp_num_siblings);
364 #ifdef CONFIG_X86_64
365 c->phys_proc_id = phys_pkg_id(index_msb);
366 #else
367 c->phys_proc_id = phys_pkg_id(c->initial_apicid, index_msb);
368 #endif
369
370 smp_num_siblings = smp_num_siblings / c->x86_max_cores;
371
372 index_msb = get_count_order(smp_num_siblings);
373
374 core_bits = get_count_order(c->x86_max_cores);
375
376 #ifdef CONFIG_X86_64
377 c->cpu_core_id = phys_pkg_id(index_msb) &
378 ((1 << core_bits) - 1);
379 #else
380 c->cpu_core_id = phys_pkg_id(c->initial_apicid, index_msb) &
381 ((1 << core_bits) - 1);
382 #endif
383 }
384
385 out:
386 if ((c->x86_max_cores * smp_num_siblings) > 1) {
387 printk(KERN_INFO "CPU: Physical Processor ID: %d\n",
388 c->phys_proc_id);
389 printk(KERN_INFO "CPU: Processor Core ID: %d\n",
390 c->cpu_core_id);
391 }
392 #endif
393 }
394
395 static void __cpuinit get_cpu_vendor(struct cpuinfo_x86 *c)
396 {
397 char *v = c->x86_vendor_id;
398 int i;
399 static int printed;
400
401 for (i = 0; i < X86_VENDOR_NUM; i++) {
402 if (!cpu_devs[i])
403 break;
404
405 if (!strcmp(v, cpu_devs[i]->c_ident[0]) ||
406 (cpu_devs[i]->c_ident[1] &&
407 !strcmp(v, cpu_devs[i]->c_ident[1]))) {
408 this_cpu = cpu_devs[i];
409 c->x86_vendor = this_cpu->c_x86_vendor;
410 return;
411 }
412 }
413
414 if (!printed) {
415 printed++;
416 printk(KERN_ERR "CPU: vendor_id '%s' unknown, using generic init.\n", v);
417 printk(KERN_ERR "CPU: Your system may be unstable.\n");
418 }
419
420 c->x86_vendor = X86_VENDOR_UNKNOWN;
421 this_cpu = &default_cpu;
422 }
423
424 void __cpuinit cpu_detect(struct cpuinfo_x86 *c)
425 {
426 /* Get vendor name */
427 cpuid(0x00000000, (unsigned int *)&c->cpuid_level,
428 (unsigned int *)&c->x86_vendor_id[0],
429 (unsigned int *)&c->x86_vendor_id[8],
430 (unsigned int *)&c->x86_vendor_id[4]);
431
432 c->x86 = 4;
433 /* Intel-defined flags: level 0x00000001 */
434 if (c->cpuid_level >= 0x00000001) {
435 u32 junk, tfms, cap0, misc;
436 cpuid(0x00000001, &tfms, &misc, &junk, &cap0);
437 c->x86 = (tfms >> 8) & 0xf;
438 c->x86_model = (tfms >> 4) & 0xf;
439 c->x86_mask = tfms & 0xf;
440 if (c->x86 == 0xf)
441 c->x86 += (tfms >> 20) & 0xff;
442 if (c->x86 >= 0x6)
443 c->x86_model += ((tfms >> 16) & 0xf) << 4;
444 if (cap0 & (1<<19)) {
445 c->x86_clflush_size = ((misc >> 8) & 0xff) * 8;
446 c->x86_cache_alignment = c->x86_clflush_size;
447 }
448 }
449 }
450
451 static void __cpuinit get_cpu_cap(struct cpuinfo_x86 *c)
452 {
453 u32 tfms, xlvl;
454 u32 ebx;
455
456 /* Intel-defined flags: level 0x00000001 */
457 if (c->cpuid_level >= 0x00000001) {
458 u32 capability, excap;
459 cpuid(0x00000001, &tfms, &ebx, &excap, &capability);
460 c->x86_capability[0] = capability;
461 c->x86_capability[4] = excap;
462 }
463
464 /* AMD-defined flags: level 0x80000001 */
465 xlvl = cpuid_eax(0x80000000);
466 c->extended_cpuid_level = xlvl;
467 if ((xlvl & 0xffff0000) == 0x80000000) {
468 if (xlvl >= 0x80000001) {
469 c->x86_capability[1] = cpuid_edx(0x80000001);
470 c->x86_capability[6] = cpuid_ecx(0x80000001);
471 }
472 }
473
474 #ifdef CONFIG_X86_64
475 if (c->extended_cpuid_level >= 0x80000008) {
476 u32 eax = cpuid_eax(0x80000008);
477
478 c->x86_virt_bits = (eax >> 8) & 0xff;
479 c->x86_phys_bits = eax & 0xff;
480 }
481 #endif
482
483 if (c->extended_cpuid_level >= 0x80000007)
484 c->x86_power = cpuid_edx(0x80000007);
485
486 }
487
488 static void __cpuinit identify_cpu_without_cpuid(struct cpuinfo_x86 *c)
489 {
490 #ifdef CONFIG_X86_32
491 int i;
492
493 /*
494 * First of all, decide if this is a 486 or higher
495 * It's a 486 if we can modify the AC flag
496 */
497 if (flag_is_changeable_p(X86_EFLAGS_AC))
498 c->x86 = 4;
499 else
500 c->x86 = 3;
501
502 for (i = 0; i < X86_VENDOR_NUM; i++)
503 if (cpu_devs[i] && cpu_devs[i]->c_identify) {
504 c->x86_vendor_id[0] = 0;
505 cpu_devs[i]->c_identify(c);
506 if (c->x86_vendor_id[0]) {
507 get_cpu_vendor(c);
508 break;
509 }
510 }
511 #endif
512 }
513
514 /*
515 * Do minimum CPU detection early.
516 * Fields really needed: vendor, cpuid_level, family, model, mask,
517 * cache alignment.
518 * The others are not touched to avoid unwanted side effects.
519 *
520 * WARNING: this function is only called on the BP. Don't add code here
521 * that is supposed to run on all CPUs.
522 */
523 static void __init early_identify_cpu(struct cpuinfo_x86 *c)
524 {
525 #ifdef CONFIG_X86_64
526 c->x86_clflush_size = 64;
527 #else
528 c->x86_clflush_size = 32;
529 #endif
530 c->x86_cache_alignment = c->x86_clflush_size;
531
532 memset(&c->x86_capability, 0, sizeof c->x86_capability);
533 c->extended_cpuid_level = 0;
534
535 if (!have_cpuid_p())
536 identify_cpu_without_cpuid(c);
537
538 /* cyrix could have cpuid enabled via c_identify()*/
539 if (!have_cpuid_p())
540 return;
541
542 cpu_detect(c);
543
544 get_cpu_vendor(c);
545
546 get_cpu_cap(c);
547
548 if (this_cpu->c_early_init)
549 this_cpu->c_early_init(c);
550
551 validate_pat_support(c);
552
553 #ifdef CONFIG_SMP
554 c->cpu_index = boot_cpu_id;
555 #endif
556 }
557
558 void __init early_cpu_init(void)
559 {
560 struct cpu_dev **cdev;
561 int count = 0;
562
563 printk("KERNEL supported cpus:\n");
564 for (cdev = __x86_cpu_dev_start; cdev < __x86_cpu_dev_end; cdev++) {
565 struct cpu_dev *cpudev = *cdev;
566 unsigned int j;
567
568 if (count >= X86_VENDOR_NUM)
569 break;
570 cpu_devs[count] = cpudev;
571 count++;
572
573 for (j = 0; j < 2; j++) {
574 if (!cpudev->c_ident[j])
575 continue;
576 printk(" %s %s\n", cpudev->c_vendor,
577 cpudev->c_ident[j]);
578 }
579 }
580
581 early_identify_cpu(&boot_cpu_data);
582 }
583
584 /*
585 * The NOPL instruction is supposed to exist on all CPUs with
586 * family >= 6; unfortunately, that's not true in practice because
587 * of early VIA chips and (more importantly) broken virtualizers that
588 * are not easy to detect. In the latter case it doesn't even *fail*
589 * reliably, so probing for it doesn't even work. Disable it completely
590 * unless we can find a reliable way to detect all the broken cases.
591 */
592 static void __cpuinit detect_nopl(struct cpuinfo_x86 *c)
593 {
594 clear_cpu_cap(c, X86_FEATURE_NOPL);
595 }
596
597 static void __cpuinit generic_identify(struct cpuinfo_x86 *c)
598 {
599 c->extended_cpuid_level = 0;
600
601 if (!have_cpuid_p())
602 identify_cpu_without_cpuid(c);
603
604 /* cyrix could have cpuid enabled via c_identify()*/
605 if (!have_cpuid_p())
606 return;
607
608 cpu_detect(c);
609
610 get_cpu_vendor(c);
611
612 get_cpu_cap(c);
613
614 if (c->cpuid_level >= 0x00000001) {
615 c->initial_apicid = (cpuid_ebx(1) >> 24) & 0xFF;
616 #ifdef CONFIG_X86_32
617 # ifdef CONFIG_X86_HT
618 c->apicid = phys_pkg_id(c->initial_apicid, 0);
619 # else
620 c->apicid = c->initial_apicid;
621 # endif
622 #endif
623
624 #ifdef CONFIG_X86_HT
625 c->phys_proc_id = c->initial_apicid;
626 #endif
627 }
628
629 get_model_name(c); /* Default name */
630
631 init_scattered_cpuid_features(c);
632 detect_nopl(c);
633 }
634
635 /*
636 * This does the hard work of actually picking apart the CPU stuff...
637 */
638 static void __cpuinit identify_cpu(struct cpuinfo_x86 *c)
639 {
640 int i;
641
642 c->loops_per_jiffy = loops_per_jiffy;
643 c->x86_cache_size = -1;
644 c->x86_vendor = X86_VENDOR_UNKNOWN;
645 c->x86_model = c->x86_mask = 0; /* So far unknown... */
646 c->x86_vendor_id[0] = '\0'; /* Unset */
647 c->x86_model_id[0] = '\0'; /* Unset */
648 c->x86_max_cores = 1;
649 c->x86_coreid_bits = 0;
650 #ifdef CONFIG_X86_64
651 c->x86_clflush_size = 64;
652 #else
653 c->cpuid_level = -1; /* CPUID not detected */
654 c->x86_clflush_size = 32;
655 #endif
656 c->x86_cache_alignment = c->x86_clflush_size;
657 memset(&c->x86_capability, 0, sizeof c->x86_capability);
658
659 generic_identify(c);
660
661 if (this_cpu->c_identify)
662 this_cpu->c_identify(c);
663
664 #ifdef CONFIG_X86_64
665 c->apicid = phys_pkg_id(0);
666 #endif
667
668 /*
669 * Vendor-specific initialization. In this section we
670 * canonicalize the feature flags, meaning if there are
671 * features a certain CPU supports which CPUID doesn't
672 * tell us, CPUID claiming incorrect flags, or other bugs,
673 * we handle them here.
674 *
675 * At the end of this section, c->x86_capability better
676 * indicate the features this CPU genuinely supports!
677 */
678 if (this_cpu->c_init)
679 this_cpu->c_init(c);
680
681 /* Disable the PN if appropriate */
682 squash_the_stupid_serial_number(c);
683
684 /*
685 * The vendor-specific functions might have changed features. Now
686 * we do "generic changes."
687 */
688
689 /* If the model name is still unset, do table lookup. */
690 if (!c->x86_model_id[0]) {
691 char *p;
692 p = table_lookup_model(c);
693 if (p)
694 strcpy(c->x86_model_id, p);
695 else
696 /* Last resort... */
697 sprintf(c->x86_model_id, "%02x/%02x",
698 c->x86, c->x86_model);
699 }
700
701 #ifdef CONFIG_X86_64
702 detect_ht(c);
703 #endif
704
705 /*
706 * On SMP, boot_cpu_data holds the common feature set between
707 * all CPUs; so make sure that we indicate which features are
708 * common between the CPUs. The first time this routine gets
709 * executed, c == &boot_cpu_data.
710 */
711 if (c != &boot_cpu_data) {
712 /* AND the already accumulated flags with these */
713 for (i = 0; i < NCAPINTS; i++)
714 boot_cpu_data.x86_capability[i] &= c->x86_capability[i];
715 }
716
717 /* Clear all flags overriden by options */
718 for (i = 0; i < NCAPINTS; i++)
719 c->x86_capability[i] &= ~cleared_cpu_caps[i];
720
721 #ifdef CONFIG_X86_MCE
722 /* Init Machine Check Exception if available. */
723 mcheck_init(c);
724 #endif
725
726 select_idle_routine(c);
727
728 #if defined(CONFIG_NUMA) && defined(CONFIG_X86_64)
729 numa_add_cpu(smp_processor_id());
730 #endif
731 }
732
733 #ifdef CONFIG_X86_64
734 static void vgetcpu_set_mode(void)
735 {
736 if (cpu_has(&boot_cpu_data, X86_FEATURE_RDTSCP))
737 vgetcpu_mode = VGETCPU_RDTSCP;
738 else
739 vgetcpu_mode = VGETCPU_LSL;
740 }
741 #endif
742
743 void __init identify_boot_cpu(void)
744 {
745 identify_cpu(&boot_cpu_data);
746 #ifdef CONFIG_X86_32
747 sysenter_setup();
748 enable_sep_cpu();
749 #else
750 vgetcpu_set_mode();
751 #endif
752 }
753
754 void __cpuinit identify_secondary_cpu(struct cpuinfo_x86 *c)
755 {
756 BUG_ON(c == &boot_cpu_data);
757 identify_cpu(c);
758 #ifdef CONFIG_X86_32
759 enable_sep_cpu();
760 #endif
761 mtrr_ap_init();
762 }
763
764 struct msr_range {
765 unsigned min;
766 unsigned max;
767 };
768
769 static struct msr_range msr_range_array[] __cpuinitdata = {
770 { 0x00000000, 0x00000418},
771 { 0xc0000000, 0xc000040b},
772 { 0xc0010000, 0xc0010142},
773 { 0xc0011000, 0xc001103b},
774 };
775
776 static void __cpuinit print_cpu_msr(void)
777 {
778 unsigned index;
779 u64 val;
780 int i;
781 unsigned index_min, index_max;
782
783 for (i = 0; i < ARRAY_SIZE(msr_range_array); i++) {
784 index_min = msr_range_array[i].min;
785 index_max = msr_range_array[i].max;
786 for (index = index_min; index < index_max; index++) {
787 if (rdmsrl_amd_safe(index, &val))
788 continue;
789 printk(KERN_INFO " MSR%08x: %016llx\n", index, val);
790 }
791 }
792 }
793
794 static int show_msr __cpuinitdata;
795 static __init int setup_show_msr(char *arg)
796 {
797 int num;
798
799 get_option(&arg, &num);
800
801 if (num > 0)
802 show_msr = num;
803 return 1;
804 }
805 __setup("show_msr=", setup_show_msr);
806
807 static __init int setup_noclflush(char *arg)
808 {
809 setup_clear_cpu_cap(X86_FEATURE_CLFLSH);
810 return 1;
811 }
812 __setup("noclflush", setup_noclflush);
813
814 void __cpuinit print_cpu_info(struct cpuinfo_x86 *c)
815 {
816 char *vendor = NULL;
817
818 if (c->x86_vendor < X86_VENDOR_NUM)
819 vendor = this_cpu->c_vendor;
820 else if (c->cpuid_level >= 0)
821 vendor = c->x86_vendor_id;
822
823 if (vendor && !strstr(c->x86_model_id, vendor))
824 printk(KERN_CONT "%s ", vendor);
825
826 if (c->x86_model_id[0])
827 printk(KERN_CONT "%s", c->x86_model_id);
828 else
829 printk(KERN_CONT "%d86", c->x86);
830
831 if (c->x86_mask || c->cpuid_level >= 0)
832 printk(KERN_CONT " stepping %02x\n", c->x86_mask);
833 else
834 printk(KERN_CONT "\n");
835
836 #ifdef CONFIG_SMP
837 if (c->cpu_index < show_msr)
838 print_cpu_msr();
839 #else
840 if (show_msr)
841 print_cpu_msr();
842 #endif
843 }
844
845 static __init int setup_disablecpuid(char *arg)
846 {
847 int bit;
848 if (get_option(&arg, &bit) && bit < NCAPINTS*32)
849 setup_clear_cpu_cap(bit);
850 else
851 return 0;
852 return 1;
853 }
854 __setup("clearcpuid=", setup_disablecpuid);
855
856 cpumask_t cpu_initialized __cpuinitdata = CPU_MASK_NONE;
857
858 #ifdef CONFIG_X86_64
859 struct x8664_pda **_cpu_pda __read_mostly;
860 EXPORT_SYMBOL(_cpu_pda);
861
862 struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table };
863
864 char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss;
865
866 void __cpuinit pda_init(int cpu)
867 {
868 struct x8664_pda *pda = cpu_pda(cpu);
869
870 /* Setup up data that may be needed in __get_free_pages early */
871 loadsegment(fs, 0);
872 loadsegment(gs, 0);
873 /* Memory clobbers used to order PDA accessed */
874 mb();
875 wrmsrl(MSR_GS_BASE, pda);
876 mb();
877
878 pda->cpunumber = cpu;
879 pda->irqcount = -1;
880 pda->kernelstack = (unsigned long)stack_thread_info() -
881 PDA_STACKOFFSET + THREAD_SIZE;
882 pda->active_mm = &init_mm;
883 pda->mmu_state = 0;
884
885 if (cpu == 0) {
886 /* others are initialized in smpboot.c */
887 pda->pcurrent = &init_task;
888 pda->irqstackptr = boot_cpu_stack;
889 pda->irqstackptr += IRQSTACKSIZE - 64;
890 } else {
891 if (!pda->irqstackptr) {
892 pda->irqstackptr = (char *)
893 __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER);
894 if (!pda->irqstackptr)
895 panic("cannot allocate irqstack for cpu %d",
896 cpu);
897 pda->irqstackptr += IRQSTACKSIZE - 64;
898 }
899
900 if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE)
901 pda->nodenumber = cpu_to_node(cpu);
902 }
903 }
904
905 char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ +
906 DEBUG_STKSZ] __page_aligned_bss;
907
908 extern asmlinkage void ignore_sysret(void);
909
910 /* May not be marked __init: used by software suspend */
911 void syscall_init(void)
912 {
913 /*
914 * LSTAR and STAR live in a bit strange symbiosis.
915 * They both write to the same internal register. STAR allows to
916 * set CS/DS but only a 32bit target. LSTAR sets the 64bit rip.
917 */
918 wrmsrl(MSR_STAR, ((u64)__USER32_CS)<<48 | ((u64)__KERNEL_CS)<<32);
919 wrmsrl(MSR_LSTAR, system_call);
920 wrmsrl(MSR_CSTAR, ignore_sysret);
921
922 #ifdef CONFIG_IA32_EMULATION
923 syscall32_cpu_init();
924 #endif
925
926 /* Flags to clear on syscall */
927 wrmsrl(MSR_SYSCALL_MASK,
928 X86_EFLAGS_TF|X86_EFLAGS_DF|X86_EFLAGS_IF|X86_EFLAGS_IOPL);
929 }
930
931 unsigned long kernel_eflags;
932
933 /*
934 * Copies of the original ist values from the tss are only accessed during
935 * debugging, no special alignment required.
936 */
937 DEFINE_PER_CPU(struct orig_ist, orig_ist);
938
939 #else
940
941 /* Make sure %fs is initialized properly in idle threads */
942 struct pt_regs * __cpuinit idle_regs(struct pt_regs *regs)
943 {
944 memset(regs, 0, sizeof(struct pt_regs));
945 regs->fs = __KERNEL_PERCPU;
946 return regs;
947 }
948 #endif
949
950 /*
951 * cpu_init() initializes state that is per-CPU. Some data is already
952 * initialized (naturally) in the bootstrap process, such as the GDT
953 * and IDT. We reload them nevertheless, this function acts as a
954 * 'CPU state barrier', nothing should get across.
955 * A lot of state is already set up in PDA init for 64 bit
956 */
957 #ifdef CONFIG_X86_64
958 void __cpuinit cpu_init(void)
959 {
960 int cpu = stack_smp_processor_id();
961 struct tss_struct *t = &per_cpu(init_tss, cpu);
962 struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu);
963 unsigned long v;
964 char *estacks = NULL;
965 struct task_struct *me;
966 int i;
967
968 /* CPU 0 is initialised in head64.c */
969 if (cpu != 0)
970 pda_init(cpu);
971 else
972 estacks = boot_exception_stacks;
973
974 me = current;
975
976 if (cpu_test_and_set(cpu, cpu_initialized))
977 panic("CPU#%d already initialized!\n", cpu);
978
979 printk(KERN_INFO "Initializing CPU#%d\n", cpu);
980
981 clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
982
983 /*
984 * Initialize the per-CPU GDT with the boot GDT,
985 * and set up the GDT descriptor:
986 */
987
988 switch_to_new_gdt();
989 load_idt((const struct desc_ptr *)&idt_descr);
990
991 memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8);
992 syscall_init();
993
994 wrmsrl(MSR_FS_BASE, 0);
995 wrmsrl(MSR_KERNEL_GS_BASE, 0);
996 barrier();
997
998 check_efer();
999 if (cpu != 0 && x2apic)
1000 enable_x2apic();
1001
1002 /*
1003 * set up and load the per-CPU TSS
1004 */
1005 if (!orig_ist->ist[0]) {
1006 static const unsigned int order[N_EXCEPTION_STACKS] = {
1007 [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER,
1008 [DEBUG_STACK - 1] = DEBUG_STACK_ORDER
1009 };
1010 for (v = 0; v < N_EXCEPTION_STACKS; v++) {
1011 if (cpu) {
1012 estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]);
1013 if (!estacks)
1014 panic("Cannot allocate exception "
1015 "stack %ld %d\n", v, cpu);
1016 }
1017 estacks += PAGE_SIZE << order[v];
1018 orig_ist->ist[v] = t->x86_tss.ist[v] =
1019 (unsigned long)estacks;
1020 }
1021 }
1022
1023 t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
1024 /*
1025 * <= is required because the CPU will access up to
1026 * 8 bits beyond the end of the IO permission bitmap.
1027 */
1028 for (i = 0; i <= IO_BITMAP_LONGS; i++)
1029 t->io_bitmap[i] = ~0UL;
1030
1031 atomic_inc(&init_mm.mm_count);
1032 me->active_mm = &init_mm;
1033 if (me->mm)
1034 BUG();
1035 enter_lazy_tlb(&init_mm, me);
1036
1037 load_sp0(t, &current->thread);
1038 set_tss_desc(cpu, t);
1039 load_TR_desc();
1040 load_LDT(&init_mm.context);
1041
1042 #ifdef CONFIG_KGDB
1043 /*
1044 * If the kgdb is connected no debug regs should be altered. This
1045 * is only applicable when KGDB and a KGDB I/O module are built
1046 * into the kernel and you are using early debugging with
1047 * kgdbwait. KGDB will control the kernel HW breakpoint registers.
1048 */
1049 if (kgdb_connected && arch_kgdb_ops.correct_hw_break)
1050 arch_kgdb_ops.correct_hw_break();
1051 else {
1052 #endif
1053 /*
1054 * Clear all 6 debug registers:
1055 */
1056
1057 set_debugreg(0UL, 0);
1058 set_debugreg(0UL, 1);
1059 set_debugreg(0UL, 2);
1060 set_debugreg(0UL, 3);
1061 set_debugreg(0UL, 6);
1062 set_debugreg(0UL, 7);
1063 #ifdef CONFIG_KGDB
1064 /* If the kgdb is connected no debug regs should be altered. */
1065 }
1066 #endif
1067
1068 fpu_init();
1069
1070 raw_local_save_flags(kernel_eflags);
1071
1072 if (is_uv_system())
1073 uv_cpu_init();
1074 }
1075
1076 #else
1077
1078 void __cpuinit cpu_init(void)
1079 {
1080 int cpu = smp_processor_id();
1081 struct task_struct *curr = current;
1082 struct tss_struct *t = &per_cpu(init_tss, cpu);
1083 struct thread_struct *thread = &curr->thread;
1084
1085 if (cpu_test_and_set(cpu, cpu_initialized)) {
1086 printk(KERN_WARNING "CPU#%d already initialized!\n", cpu);
1087 for (;;) local_irq_enable();
1088 }
1089
1090 printk(KERN_INFO "Initializing CPU#%d\n", cpu);
1091
1092 if (cpu_has_vme || cpu_has_tsc || cpu_has_de)
1093 clear_in_cr4(X86_CR4_VME|X86_CR4_PVI|X86_CR4_TSD|X86_CR4_DE);
1094
1095 load_idt(&idt_descr);
1096 switch_to_new_gdt();
1097
1098 /*
1099 * Set up and load the per-CPU TSS and LDT
1100 */
1101 atomic_inc(&init_mm.mm_count);
1102 curr->active_mm = &init_mm;
1103 if (curr->mm)
1104 BUG();
1105 enter_lazy_tlb(&init_mm, curr);
1106
1107 load_sp0(t, thread);
1108 set_tss_desc(cpu, t);
1109 load_TR_desc();
1110 load_LDT(&init_mm.context);
1111
1112 #ifdef CONFIG_DOUBLEFAULT
1113 /* Set up doublefault TSS pointer in the GDT */
1114 __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
1115 #endif
1116
1117 /* Clear %gs. */
1118 asm volatile ("mov %0, %%gs" : : "r" (0));
1119
1120 /* Clear all 6 debug registers: */
1121 set_debugreg(0, 0);
1122 set_debugreg(0, 1);
1123 set_debugreg(0, 2);
1124 set_debugreg(0, 3);
1125 set_debugreg(0, 6);
1126 set_debugreg(0, 7);
1127
1128 /*
1129 * Force FPU initialization:
1130 */
1131 if (cpu_has_xsave)
1132 current_thread_info()->status = TS_XSAVE;
1133 else
1134 current_thread_info()->status = 0;
1135 clear_used_math();
1136 mxcsr_feature_mask_init();
1137
1138 /*
1139 * Boot processor to setup the FP and extended state context info.
1140 */
1141 if (smp_processor_id() == boot_cpu_id)
1142 init_thread_xstate();
1143
1144 xsave_init();
1145 }
1146
1147
1148 #endif