arch/x86/kernel/cpu/cpufreq/elanfreq.c

   1 /*
   2  *      elanfreq:       cpufreq driver for the AMD ELAN family
   3  *
   4  *      (c) Copyright 2002 Robert Schwebel <r.schwebel@pengutronix.de>
   5  *
   6  *      Parts of this code are (c) Sven Geggus <sven@geggus.net>
   7  *
   8  *      All Rights Reserved.
   9  *
  10  *      This program is free software; you can redistribute it and/or
  11  *      modify it under the terms of the GNU General Public License
  12  *      as published by the Free Software Foundation; either version
  13  *      2 of the License, or (at your option) any later version.
  14  *
  15  *      2002-02-13: - initial revision for 2.4.18-pre9 by Robert Schwebel
  16  *
  17  */
  18
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/init.h>
  22
  23 #include <linux/delay.h>
  24 #include <linux/cpufreq.h>
  25
  26 #include <asm/msr.h>
  27 #include <linux/timex.h>
  28 #include <linux/io.h>
  29
  30 #define REG_CSCIR 0x22          /* Chip Setup and Control Index Register    */
  31 #define REG_CSCDR 0x23          /* Chip Setup and Control Data  Register    */
  32
  33 /* Module parameter */
  34 static int max_freq;
  35
  36 struct s_elan_multiplier {
  37         int clock;              /* frequency in kHz                         */
  38         int val40h;             /* PMU Force Mode register                  */
  39         int val80h;             /* CPU Clock Speed Register                 */
  40 };
  41
  42 /*
  43  * It is important that the frequencies
  44  * are listed in ascending order here!
  45  */
  46 static struct s_elan_multiplier elan_multiplier[] = {
  47         {1000,  0x02,   0x18},
  48         {2000,  0x02,   0x10},
  49         {4000,  0x02,   0x08},
  50         {8000,  0x00,   0x00},
  51         {16000, 0x00,   0x02},
  52         {33000, 0x00,   0x04},
  53         {66000, 0x01,   0x04},
  54         {99000, 0x01,   0x05}
  55 };
  56
  57 static struct cpufreq_frequency_table elanfreq_table[] = {
  58         {0,     1000},
  59         {1,     2000},
  60         {2,     4000},
  61         {3,     8000},
  62         {4,     16000},
  63         {5,     33000},
  64         {6,     66000},
  65         {7,     99000},
  66         {0,     CPUFREQ_TABLE_END},
  67 };
  68
  69
  70 /**
  71  *      elanfreq_get_cpu_frequency: determine current cpu speed
  72  *
  73  *      Finds out at which frequency the CPU of the Elan SOC runs
  74  *      at the moment. Frequencies from 1 to 33 MHz are generated
  75  *      the normal way, 66 and 99 MHz are called "Hyperspeed Mode"
  76  *      and have the rest of the chip running with 33 MHz.
  77  */
  78
  79 static unsigned int elanfreq_get_cpu_frequency(unsigned int cpu)
  80 {
  81         u8 clockspeed_reg;    /* Clock Speed Register */
  82
  83         local_irq_disable();
  84         outb_p(0x80, REG_CSCIR);
  85         clockspeed_reg = inb_p(REG_CSCDR);
  86         local_irq_enable();
  87
  88         if ((clockspeed_reg & 0xE0) == 0xE0)
  89                 return 0;
  90
  91         /* Are we in CPU clock multiplied mode (66/99 MHz)? */
  92         if ((clockspeed_reg & 0xE0) == 0xC0) {
  93                 if ((clockspeed_reg & 0x01) == 0)
  94                         return 66000;
  95                 else
  96                         return 99000;
  97         }
  98
  99         /* 33 MHz is not 32 MHz... */
 100         if ((clockspeed_reg & 0xE0) == 0xA0)
 101                 return 33000;
 102
 103         return (1<<((clockspeed_reg & 0xE0) >> 5)) * 1000;
 104 }
 105
 106
 107 /**
 108  *      elanfreq_set_cpu_frequency: Change the CPU core frequency
 109  *      @cpu: cpu number
 110  *      @freq: frequency in kHz
 111  *
 112  *      This function takes a frequency value and changes the CPU frequency
 113  *      according to this. Note that the frequency has to be checked by
 114  *      elanfreq_validatespeed() for correctness!
 115  *
 116  *      There is no return value.
 117  */
 118
 119 static void elanfreq_set_cpu_state(unsigned int state)
 120 {
 121         struct cpufreq_freqs    freqs;
 122
 123         freqs.old = elanfreq_get_cpu_frequency(0);
 124         freqs.new = elan_multiplier[state].clock;
 125         freqs.cpu = 0; /* elanfreq.c is UP only driver */
 126
 127         cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 128
 129         printk(KERN_INFO "elanfreq: attempting to set frequency to %i kHz\n",
 130                         elan_multiplier[state].clock);
 131
 132
 133         /*
 134          * Access to the Elan's internal registers is indexed via
 135          * 0x22: Chip Setup & Control Register Index Register (CSCI)
 136          * 0x23: Chip Setup & Control Register Data  Register (CSCD)
 137          *
 138          */
 139
 140         /*
 141          * 0x40 is the Power Management Unit's Force Mode Register.
 142          * Bit 6 enables Hyperspeed Mode (66/100 MHz core frequency)
 143          */
 144
 145         local_irq_disable();
 146         outb_p(0x40, REG_CSCIR);                /* Disable hyperspeed mode */
 147         outb_p(0x00, REG_CSCDR);
 148         local_irq_enable();             /* wait till internal pipelines and */
 149         udelay(1000);                   /* buffers have cleaned up          */
 150
 151         local_irq_disable();
 152
 153         /* now, set the CPU clock speed register (0x80) */
 154         outb_p(0x80, REG_CSCIR);
 155         outb_p(elan_multiplier[state].val80h, REG_CSCDR);
 156
 157         /* now, the hyperspeed bit in PMU Force Mode Register (0x40) */
 158         outb_p(0x40, REG_CSCIR);
 159         outb_p(elan_multiplier[state].val40h, REG_CSCDR);
 160         udelay(10000);
 161         local_irq_enable();
 162
 163         cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 164 };
 165
 166
 167 /**
 168  *      elanfreq_validatespeed: test if frequency range is valid
 169  *      @policy: the policy to validate
 170  *
 171  *      This function checks if a given frequency range in kHz is valid
 172  *      for the hardware supported by the driver.
 173  */
 174
 175 static int elanfreq_verify(struct cpufreq_policy *policy)
 176 {
 177         return cpufreq_frequency_table_verify(policy, &elanfreq_table[0]);
 178 }
 179
 180 static int elanfreq_target(struct cpufreq_policy *policy,
 181                             unsigned int target_freq,
 182                             unsigned int relation)
 183 {
 184         unsigned int newstate = 0;
 185
 186         if (cpufreq_frequency_table_target(policy, &elanfreq_table[0],
 187                                 target_freq, relation, &newstate))
 188                 return -EINVAL;
 189
 190         elanfreq_set_cpu_state(newstate);
 191
 192         return 0;
 193 }
 194
 195
 196 /*
 197  *      Module init and exit code
 198  */
 199
 200 static int elanfreq_cpu_init(struct cpufreq_policy *policy)
 201 {
 202         struct cpuinfo_x86 *c = &cpu_data(0);
 203         unsigned int i;
 204         int result;
 205
 206         /* capability check */
 207         if ((c->x86_vendor != X86_VENDOR_AMD) ||
 208             (c->x86 != 4) || (c->x86_model != 10))
 209                 return -ENODEV;
 210
 211         /* max freq */
 212         if (!max_freq)
 213                 max_freq = elanfreq_get_cpu_frequency(0);
 214
 215         /* table init */
 216         for (i = 0; (elanfreq_table[i].frequency != CPUFREQ_TABLE_END); i++) {
 217                 if (elanfreq_table[i].frequency > max_freq)
 218                         elanfreq_table[i].frequency = CPUFREQ_ENTRY_INVALID;
 219         }
 220
 221         /* cpuinfo and default policy values */
 222         policy->cpuinfo.transition_latency = CPUFREQ_ETERNAL;
 223         policy->cur = elanfreq_get_cpu_frequency(0);
 224
 225         result = cpufreq_frequency_table_cpuinfo(policy, elanfreq_table);
 226         if (result)
 227                 return result;
 228
 229         cpufreq_frequency_table_get_attr(elanfreq_table, policy->cpu);
 230         return 0;
 231 }
 232
 233
 234 static int elanfreq_cpu_exit(struct cpufreq_policy *policy)
 235 {
 236         cpufreq_frequency_table_put_attr(policy->cpu);
 237         return 0;
 238 }
 239
 240
 241 #ifndef MODULE
 242 /**
 243  * elanfreq_setup - elanfreq command line parameter parsing
 244  *
 245  * elanfreq command line parameter.  Use:
 246  *  elanfreq=66000
 247  * to set the maximum CPU frequency to 66 MHz. Note that in
 248  * case you do not give this boot parameter, the maximum
 249  * frequency will fall back to _current_ CPU frequency which
 250  * might be lower. If you build this as a module, use the
 251  * max_freq module parameter instead.
 252  */
 253 static int __init elanfreq_setup(char *str)
 254 {
 255         max_freq = simple_strtoul(str, &str, 0);
 256         printk(KERN_WARNING "You're using the deprecated elanfreq command line option. Use elanfreq.max_freq instead, please!\n");
 257         return 1;
 258 }
 259 __setup("elanfreq=", elanfreq_setup);
 260 #endif
 261
 262
 263 static struct freq_attr *elanfreq_attr[] = {
 264         &cpufreq_freq_attr_scaling_available_freqs,
 265         NULL,
 266 };
 267
 268
 269 static struct cpufreq_driver elanfreq_driver = {
 270         .get            = elanfreq_get_cpu_frequency,
 271         .verify         = elanfreq_verify,
 272         .target         = elanfreq_target,
 273         .init           = elanfreq_cpu_init,
 274         .exit           = elanfreq_cpu_exit,
 275         .name           = "elanfreq",
 276         .owner          = THIS_MODULE,
 277         .attr           = elanfreq_attr,
 278 };
 279
 280
 281 static int __init elanfreq_init(void)
 282 {
 283         struct cpuinfo_x86 *c = &cpu_data(0);
 284
 285         /* Test if we have the right hardware */
 286         if ((c->x86_vendor != X86_VENDOR_AMD) ||
 287                 (c->x86 != 4) || (c->x86_model != 10)) {
 288                 printk(KERN_INFO "elanfreq: error: no Elan processor found!\n");
 289                 return -ENODEV;
 290         }
 291         return cpufreq_register_driver(&elanfreq_driver);
 292 }
 293
 294
 295 static void __exit elanfreq_exit(void)
 296 {
 297         cpufreq_unregister_driver(&elanfreq_driver);
 298 }
 299
 300
 301 module_param(max_freq, int, 0444);
 302
 303 MODULE_LICENSE("GPL");
 304 MODULE_AUTHOR("Robert Schwebel <r.schwebel@pengutronix.de>, "
 305                 "Sven Geggus <sven@geggus.net>");
 306 MODULE_DESCRIPTION("cpufreq driver for AMD's Elan CPUs");
 307
 308 module_init(elanfreq_init);
 309 module_exit(elanfreq_exit);