arch/x86/kernel/head_32.S

   1 /*
   2  *
   3  *  Copyright (C) 1991, 1992  Linus Torvalds
   4  *
   5  *  Enhanced CPU detection and feature setting code by Mike Jagdis
   6  *  and Martin Mares, November 1997.
   7  */
   8
   9 .text
  10 #include <linux/threads.h>
  11 #include <linux/init.h>
  12 #include <linux/linkage.h>
  13 #include <asm/segment.h>
  14 #include <asm/page_types.h>
  15 #include <asm/pgtable_types.h>
  16 #include <asm/cache.h>
  17 #include <asm/thread_info.h>
  18 #include <asm/asm-offsets.h>
  19 #include <asm/setup.h>
  20 #include <asm/processor-flags.h>
  21 #include <asm/msr-index.h>
  22 #include <asm/cpufeature.h>
  23 #include <asm/percpu.h>
  24 #include <asm/nops.h>
  25
  26 /* Physical address */
  27 #define pa(X) ((X) - __PAGE_OFFSET)
  28
  29 /*
  30  * References to members of the new_cpu_data structure.
  31  */
  32
  33 #define X86             new_cpu_data+CPUINFO_x86
  34 #define X86_VENDOR      new_cpu_data+CPUINFO_x86_vendor
  35 #define X86_MODEL       new_cpu_data+CPUINFO_x86_model
  36 #define X86_MASK        new_cpu_data+CPUINFO_x86_mask
  37 #define X86_HARD_MATH   new_cpu_data+CPUINFO_hard_math
  38 #define X86_CPUID       new_cpu_data+CPUINFO_cpuid_level
  39 #define X86_CAPABILITY  new_cpu_data+CPUINFO_x86_capability
  40 #define X86_VENDOR_ID   new_cpu_data+CPUINFO_x86_vendor_id
  41
  42 /*
  43  * This is how much memory in addition to the memory covered up to
  44  * and including _end we need mapped initially.
  45  * We need:
  46  *     (KERNEL_IMAGE_SIZE/4096) / 1024 pages (worst case, non PAE)
  47  *     (KERNEL_IMAGE_SIZE/4096) / 512 + 4 pages (worst case for PAE)
  48  *
  49  * Modulo rounding, each megabyte assigned here requires a kilobyte of
  50  * memory, which is currently unreclaimed.
  51  *
  52  * This should be a multiple of a page.
  53  *
  54  * KERNEL_IMAGE_SIZE should be greater than pa(_end)
  55  * and small than max_low_pfn, otherwise will waste some page table entries
  56  */
  57
  58 #if PTRS_PER_PMD > 1
  59 #define PAGE_TABLE_SIZE(pages) (((pages) / PTRS_PER_PMD) + PTRS_PER_PGD)
  60 #else
  61 #define PAGE_TABLE_SIZE(pages) ((pages) / PTRS_PER_PGD)
  62 #endif
  63
  64 /* Number of possible pages in the lowmem region */
  65 LOWMEM_PAGES = (((1<<32) - __PAGE_OFFSET) >> PAGE_SHIFT)
  66
  67 /* Enough space to fit pagetables for the low memory linear map */
  68 MAPPING_BEYOND_END = PAGE_TABLE_SIZE(LOWMEM_PAGES) << PAGE_SHIFT
  69
  70 /*
  71  * Worst-case size of the kernel mapping we need to make:
  72  * a relocatable kernel can live anywhere in lowmem, so we need to be able
  73  * to map all of lowmem.
  74  */
  75 KERNEL_PAGES = LOWMEM_PAGES
  76
  77 INIT_MAP_SIZE = PAGE_TABLE_SIZE(KERNEL_PAGES) * PAGE_SIZE
  78 RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  79
  80 /*
  81  * 32-bit kernel entrypoint; only used by the boot CPU.  On entry,
  82  * %esi points to the real-mode code as a 32-bit pointer.
  83  * CS and DS must be 4 GB flat segments, but we don't depend on
  84  * any particular GDT layout, because we load our own as soon as we
  85  * can.
  86  */
  87 __HEAD
  88 ENTRY(startup_32)
  89         movl pa(stack_start),%ecx
  90
  91         /* test KEEP_SEGMENTS flag to see if the bootloader is asking
  92                 us to not reload segments */
  93         testb $(1<<6), BP_loadflags(%esi)
  94         jnz 2f
  95
  96 /*
  97  * Set segments to known values.
  98  */
  99         lgdt pa(boot_gdt_descr)
 100         movl $(__BOOT_DS),%eax
 101         movl %eax,%ds
 102         movl %eax,%es
 103         movl %eax,%fs
 104         movl %eax,%gs
 105         movl %eax,%ss
 106 2:
 107         leal -__PAGE_OFFSET(%ecx),%esp
 108
 109 /*
 110  * Clear BSS first so that there are no surprises...
 111  */
 112         cld
 113         xorl %eax,%eax
 114         movl $pa(__bss_start),%edi
 115         movl $pa(__bss_stop),%ecx
 116         subl %edi,%ecx
 117         shrl $2,%ecx
 118         rep ; stosl
 119 /*
 120  * Copy bootup parameters out of the way.
 121  * Note: %esi still has the pointer to the real-mode data.
 122  * With the kexec as boot loader, parameter segment might be loaded beyond
 123  * kernel image and might not even be addressable by early boot page tables.
 124  * (kexec on panic case). Hence copy out the parameters before initializing
 125  * page tables.
 126  */
 127         movl $pa(boot_params),%edi
 128         movl $(PARAM_SIZE/4),%ecx
 129         cld
 130         rep
 131         movsl
 132         movl pa(boot_params) + NEW_CL_POINTER,%esi
 133         andl %esi,%esi
 134         jz 1f                   # No command line
 135         movl $pa(boot_command_line),%edi
 136         movl $(COMMAND_LINE_SIZE/4),%ecx
 137         rep
 138         movsl
 139 1:
 140
 141 #ifdef CONFIG_OLPC
 142         /* save OFW's pgdir table for later use when calling into OFW */
 143         movl %cr3, %eax
 144         movl %eax, pa(olpc_ofw_pgd)
 145 #endif
 146
 147 /*
 148  * Initialize page tables.  This creates a PDE and a set of page
 149  * tables, which are located immediately beyond __brk_base.  The variable
 150  * _brk_end is set up to point to the first "safe" location.
 151  * Mappings are created both at virtual address 0 (identity mapping)
 152  * and PAGE_OFFSET for up to _end.
 153  */
 154 #ifdef CONFIG_X86_PAE
 155
 156         /*
 157          * In PAE mode initial_page_table is statically defined to contain
 158          * enough entries to cover the VMSPLIT option (that is the top 1, 2 or 3
 159          * entries). The identity mapping is handled by pointing two PGD entries
 160          * to the first kernel PMD.
 161          *
 162          * Note the upper half of each PMD or PTE are always zero at this stage.
 163          */
 164
 165 #define KPMDS (((-__PAGE_OFFSET) >> 30) & 3) /* Number of kernel PMDs */
 166
 167         xorl %ebx,%ebx                          /* %ebx is kept at zero */
 168
 169         movl $pa(__brk_base), %edi
 170         movl $pa(initial_pg_pmd), %edx
 171         movl $PTE_IDENT_ATTR, %eax
 172 10:
 173         leal PDE_IDENT_ATTR(%edi),%ecx          /* Create PMD entry */
 174         movl %ecx,(%edx)                        /* Store PMD entry */
 175                                                 /* Upper half already zero */
 176         addl $8,%edx
 177         movl $512,%ecx
 178 11:
 179         stosl
 180         xchgl %eax,%ebx
 181         stosl
 182         xchgl %eax,%ebx
 183         addl $0x1000,%eax
 184         loop 11b
 185
 186         /*
 187          * End condition: we must map up to the end + MAPPING_BEYOND_END.
 188          */
 189         movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
 190         cmpl %ebp,%eax
 191         jb 10b
 192 1:
 193         addl $__PAGE_OFFSET, %edi
 194         movl %edi, pa(_brk_end)
 195         shrl $12, %eax
 196         movl %eax, pa(max_pfn_mapped)
 197
 198         /* Do early initialization of the fixmap area */
 199         movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
 200         movl %eax,pa(initial_pg_pmd+0x1000*KPMDS-8)
 201 #else   /* Not PAE */
 202
 203 page_pde_offset = (__PAGE_OFFSET >> 20);
 204
 205         movl $pa(__brk_base), %edi
 206         movl $pa(initial_page_table), %edx
 207         movl $PTE_IDENT_ATTR, %eax
 208 10:
 209         leal PDE_IDENT_ATTR(%edi),%ecx          /* Create PDE entry */
 210         movl %ecx,(%edx)                        /* Store identity PDE entry */
 211         movl %ecx,page_pde_offset(%edx)         /* Store kernel PDE entry */
 212         addl $4,%edx
 213         movl $1024, %ecx
 214 11:
 215         stosl
 216         addl $0x1000,%eax
 217         loop 11b
 218         /*
 219          * End condition: we must map up to the end + MAPPING_BEYOND_END.
 220          */
 221         movl $pa(_end) + MAPPING_BEYOND_END + PTE_IDENT_ATTR, %ebp
 222         cmpl %ebp,%eax
 223         jb 10b
 224         addl $__PAGE_OFFSET, %edi
 225         movl %edi, pa(_brk_end)
 226         shrl $12, %eax
 227         movl %eax, pa(max_pfn_mapped)
 228
 229         /* Do early initialization of the fixmap area */
 230         movl $pa(initial_pg_fixmap)+PDE_IDENT_ATTR,%eax
 231         movl %eax,pa(initial_page_table+0xffc)
 232 #endif
 233
 234 #ifdef CONFIG_PARAVIRT
 235         /* This is can only trip for a broken bootloader... */
 236         cmpw $0x207, pa(boot_params + BP_version)
 237         jb default_entry
 238
 239         /* Paravirt-compatible boot parameters.  Look to see what architecture
 240                 we're booting under. */
 241         movl pa(boot_params + BP_hardware_subarch), %eax
 242         cmpl $num_subarch_entries, %eax
 243         jae bad_subarch
 244
 245         movl pa(subarch_entries)(,%eax,4), %eax
 246         subl $__PAGE_OFFSET, %eax
 247         jmp *%eax
 248
 249 bad_subarch:
 250 WEAK(lguest_entry)
 251 WEAK(xen_entry)
 252         /* Unknown implementation; there's really
 253            nothing we can do at this point. */
 254         ud2a
 255
 256         __INITDATA
 257
 258 subarch_entries:
 259         .long default_entry             /* normal x86/PC */
 260         .long lguest_entry              /* lguest hypervisor */
 261         .long xen_entry                 /* Xen hypervisor */
 262         .long default_entry             /* Moorestown MID */
 263 num_subarch_entries = (. - subarch_entries) / 4
 264 .previous
 265 #else
 266         jmp default_entry
 267 #endif /* CONFIG_PARAVIRT */
 268
 269 /*
 270  * Non-boot CPU entry point; entered from trampoline.S
 271  * We can't lgdt here, because lgdt itself uses a data segment, but
 272  * we know the trampoline has already loaded the boot_gdt for us.
 273  *
 274  * If cpu hotplug is not supported then this code can go in init section
 275  * which will be freed later
 276  */
 277 __CPUINIT
 278 ENTRY(startup_32_smp)
 279         cld
 280         movl $(__BOOT_DS),%eax
 281         movl %eax,%ds
 282         movl %eax,%es
 283         movl %eax,%fs
 284         movl %eax,%gs
 285         movl pa(stack_start),%ecx
 286         movl %eax,%ss
 287         leal -__PAGE_OFFSET(%ecx),%esp
 288
 289 default_entry:
 290
 291 /*
 292  *      New page tables may be in 4Mbyte page mode and may
 293  *      be using the global pages.
 294  *
 295  *      NOTE! If we are on a 486 we may have no cr4 at all!
 296  *      So we do not try to touch it unless we really have
 297  *      some bits in it to set.  This won't work if the BSP
 298  *      implements cr4 but this AP does not -- very unlikely
 299  *      but be warned!  The same applies to the pse feature
 300  *      if not equally supported. --macro
 301  *
 302  *      NOTE! We have to correct for the fact that we're
 303  *      not yet offset PAGE_OFFSET..
 304  */
 305 #define cr4_bits pa(mmu_cr4_features)
 306         movl cr4_bits,%edx
 307         andl %edx,%edx
 308         jz 6f
 309         movl %cr4,%eax          # Turn on paging options (PSE,PAE,..)
 310         orl %edx,%eax
 311         movl %eax,%cr4
 312
 313         testb $X86_CR4_PAE, %al         # check if PAE is enabled
 314         jz 6f
 315
 316         /* Check if extended functions are implemented */
 317         movl $0x80000000, %eax
 318         cpuid
 319         /* Value must be in the range 0x80000001 to 0x8000ffff */
 320         subl $0x80000001, %eax
 321         cmpl $(0x8000ffff-0x80000001), %eax
 322         ja 6f
 323
 324         /* Clear bogus XD_DISABLE bits */
 325         call verify_cpu
 326
 327         mov $0x80000001, %eax
 328         cpuid
 329         /* Execute Disable bit supported? */
 330         btl $(X86_FEATURE_NX & 31), %edx
 331         jnc 6f
 332
 333         /* Setup EFER (Extended Feature Enable Register) */
 334         movl $MSR_EFER, %ecx
 335         rdmsr
 336
 337         btsl $_EFER_NX, %eax
 338         /* Make changes effective */
 339         wrmsr
 340
 341 6:
 342
 343 /*
 344  * Enable paging
 345  */
 346         movl $pa(initial_page_table), %eax
 347         movl %eax,%cr3          /* set the page table pointer.. */
 348         movl %cr0,%eax
 349         orl  $X86_CR0_PG,%eax
 350         movl %eax,%cr0          /* ..and set paging (PG) bit */
 351         ljmp $__BOOT_CS,$1f     /* Clear prefetch and normalize %eip */
 352 1:
 353         /* Shift the stack pointer to a virtual address */
 354         addl $__PAGE_OFFSET, %esp
 355
 356 /*
 357  * Initialize eflags.  Some BIOS's leave bits like NT set.  This would
 358  * confuse the debugger if this code is traced.
 359  * XXX - best to initialize before switching to protected mode.
 360  */
 361         pushl $0
 362         popfl
 363
 364 /*
 365  * start system 32-bit setup. We need to re-do some of the things done
 366  * in 16-bit mode for the "real" operations.
 367  */
 368         movl setup_once_ref,%eax
 369         andl %eax,%eax
 370         jz 1f                           # Did we do this already?
 371         call *%eax
 372 1:
 373
 374 /* check if it is 486 or 386. */
 375 /*
 376  * XXX - this does a lot of unnecessary setup.  Alignment checks don't
 377  * apply at our cpl of 0 and the stack ought to be aligned already, and
 378  * we don't need to preserve eflags.
 379  */
 380         movl $-1,X86_CPUID      # -1 for no CPUID initially
 381         movb $3,X86             # at least 386
 382         pushfl                  # push EFLAGS
 383         popl %eax               # get EFLAGS
 384         movl %eax,%ecx          # save original EFLAGS
 385         xorl $0x240000,%eax     # flip AC and ID bits in EFLAGS
 386         pushl %eax              # copy to EFLAGS
 387         popfl                   # set EFLAGS
 388         pushfl                  # get new EFLAGS
 389         popl %eax               # put it in eax
 390         xorl %ecx,%eax          # change in flags
 391         pushl %ecx              # restore original EFLAGS
 392         popfl
 393         testl $0x40000,%eax     # check if AC bit changed
 394         je is386
 395
 396         movb $4,X86             # at least 486
 397         testl $0x200000,%eax    # check if ID bit changed
 398         je is486
 399
 400         /* get vendor info */
 401         xorl %eax,%eax                  # call CPUID with 0 -> return vendor ID
 402         cpuid
 403         movl %eax,X86_CPUID             # save CPUID level
 404         movl %ebx,X86_VENDOR_ID         # lo 4 chars
 405         movl %edx,X86_VENDOR_ID+4       # next 4 chars
 406         movl %ecx,X86_VENDOR_ID+8       # last 4 chars
 407
 408         orl %eax,%eax                   # do we have processor info as well?
 409         je is486
 410
 411         movl $1,%eax            # Use the CPUID instruction to get CPU type
 412         cpuid
 413         movb %al,%cl            # save reg for future use
 414         andb $0x0f,%ah          # mask processor family
 415         movb %ah,X86
 416         andb $0xf0,%al          # mask model
 417         shrb $4,%al
 418         movb %al,X86_MODEL
 419         andb $0x0f,%cl          # mask mask revision
 420         movb %cl,X86_MASK
 421         movl %edx,X86_CAPABILITY
 422
 423 is486:  movl $0x50022,%ecx      # set AM, WP, NE and MP
 424         jmp 2f
 425
 426 is386:  movl $2,%ecx            # set MP
 427 2:      movl %cr0,%eax
 428         andl $0x80000011,%eax   # Save PG,PE,ET
 429         orl %ecx,%eax
 430         movl %eax,%cr0
 431
 432         call check_x87
 433         lgdt early_gdt_descr
 434         lidt idt_descr
 435         ljmp $(__KERNEL_CS),$1f
 436 1:      movl $(__KERNEL_DS),%eax        # reload all the segment registers
 437         movl %eax,%ss                   # after changing gdt.
 438
 439         movl $(__USER_DS),%eax          # DS/ES contains default USER segment
 440         movl %eax,%ds
 441         movl %eax,%es
 442
 443         movl $(__KERNEL_PERCPU), %eax
 444         movl %eax,%fs                   # set this cpu's percpu
 445
 446         movl $(__KERNEL_STACK_CANARY),%eax
 447         movl %eax,%gs
 448
 449         xorl %eax,%eax                  # Clear LDT
 450         lldt %ax
 451
 452         cld                     # gcc2 wants the direction flag cleared at all times
 453         pushl $0                # fake return address for unwinder
 454         jmp *(initial_code)
 455
 456 /*
 457  * We depend on ET to be correct. This checks for 287/387.
 458  */
 459 check_x87:
 460         movb $0,X86_HARD_MATH
 461         clts
 462         fninit
 463         fstsw %ax
 464         cmpb $0,%al
 465         je 1f
 466         movl %cr0,%eax          /* no coprocessor: have to set bits */
 467         xorl $4,%eax            /* set EM */
 468         movl %eax,%cr0
 469         ret
 470         ALIGN
 471 1:      movb $1,X86_HARD_MATH
 472         .byte 0xDB,0xE4         /* fsetpm for 287, ignored by 387 */
 473         ret
 474
 475
 476 #include "verify_cpu.S"
 477
 478 /*
 479  *  setup_once
 480  *
 481  *  The setup work we only want to run on the BSP.
 482  *
 483  *  Warning: %esi is live across this function.
 484  */
 485 __INIT
 486 setup_once:
 487         /*
 488          * Set up a idt with 256 entries pointing to ignore_int,
 489          * interrupt gates. It doesn't actually load idt - that needs
 490          * to be done on each CPU. Interrupts are enabled elsewhere,
 491          * when we can be relatively sure everything is ok.
 492          */
 493
 494         movl $idt_table,%edi
 495         movl $early_idt_handlers,%eax
 496         movl $NUM_EXCEPTION_VECTORS,%ecx
 497 1:
 498         movl %eax,(%edi)
 499         movl %eax,4(%edi)
 500         /* interrupt gate, dpl=0, present */
 501         movl $(0x8E000000 + __KERNEL_CS),2(%edi)
 502         addl $9,%eax
 503         addl $8,%edi
 504         loop 1b
 505
 506         movl $256 - NUM_EXCEPTION_VECTORS,%ecx
 507         movl $ignore_int,%edx
 508         movl $(__KERNEL_CS << 16),%eax
 509         movw %dx,%ax            /* selector = 0x0010 = cs */
 510         movw $0x8E00,%dx        /* interrupt gate - dpl=0, present */
 511 2:
 512         movl %eax,(%edi)
 513         movl %edx,4(%edi)
 514         addl $8,%edi
 515         loop 2b
 516
 517 #ifdef CONFIG_CC_STACKPROTECTOR
 518         /*
 519          * Configure the stack canary. The linker can't handle this by
 520          * relocation.  Manually set base address in stack canary
 521          * segment descriptor.
 522          */
 523         movl $gdt_page,%eax
 524         movl $stack_canary,%ecx
 525         movw %cx, 8 * GDT_ENTRY_STACK_CANARY + 2(%eax)
 526         shrl $16, %ecx
 527         movb %cl, 8 * GDT_ENTRY_STACK_CANARY + 4(%eax)
 528         movb %ch, 8 * GDT_ENTRY_STACK_CANARY + 7(%eax)
 529 #endif
 530
 531         andl $0,setup_once_ref  /* Once is enough, thanks */
 532         ret
 533
 534 ENTRY(early_idt_handlers)
 535         # 36(%esp) %eflags
 536         # 32(%esp) %cs
 537         # 28(%esp) %eip
 538         # 24(%rsp) error code
 539         i = 0
 540         .rept NUM_EXCEPTION_VECTORS
 541         .if (EXCEPTION_ERRCODE_MASK >> i) & 1
 542         ASM_NOP2
 543         .else
 544         pushl $0                # Dummy error code, to make stack frame uniform
 545         .endif
 546         pushl $i                # 20(%esp) Vector number
 547         jmp early_idt_handler
 548         i = i + 1
 549         .endr
 550 ENDPROC(early_idt_handlers)
 551
 552         /* This is global to keep gas from relaxing the jumps */
 553 ENTRY(early_idt_handler)
 554         cld
 555         cmpl $2,%ss:early_recursion_flag
 556         je hlt_loop
 557         incl %ss:early_recursion_flag
 558
 559         push %eax               # 16(%esp)
 560         push %ecx               # 12(%esp)
 561         push %edx               #  8(%esp)
 562         push %ds                #  4(%esp)
 563         push %es                #  0(%esp)
 564         movl $(__KERNEL_DS),%eax
 565         movl %eax,%ds
 566         movl %eax,%es
 567
 568         cmpl $(__KERNEL_CS),32(%esp)
 569         jne 10f
 570
 571         leal 28(%esp),%eax      # Pointer to %eip
 572         call early_fixup_exception
 573         andl %eax,%eax
 574         jnz ex_entry            /* found an exception entry */
 575
 576 10:
 577 #ifdef CONFIG_PRINTK
 578         xorl %eax,%eax
 579         movw %ax,2(%esp)        /* clean up the segment values on some cpus */
 580         movw %ax,6(%esp)
 581         movw %ax,34(%esp)
 582         leal  40(%esp),%eax
 583         pushl %eax              /* %esp before the exception */
 584         pushl %ebx
 585         pushl %ebp
 586         pushl %esi
 587         pushl %edi
 588         movl %cr2,%eax
 589         pushl %eax
 590         pushl (20+6*4)(%esp)    /* trapno */
 591         pushl $fault_msg
 592         call printk
 593 #endif
 594         call dump_stack
 595 hlt_loop:
 596         hlt
 597         jmp hlt_loop
 598
 599 ex_entry:
 600         pop %es
 601         pop %ds
 602         pop %edx
 603         pop %ecx
 604         pop %eax
 605         addl $8,%esp            /* drop vector number and error code */
 606         decl %ss:early_recursion_flag
 607         iret
 608 ENDPROC(early_idt_handler)
 609
 610 /* This is the default interrupt "handler" :-) */
 611         ALIGN
 612 ignore_int:
 613         cld
 614 #ifdef CONFIG_PRINTK
 615         pushl %eax
 616         pushl %ecx
 617         pushl %edx
 618         pushl %es
 619         pushl %ds
 620         movl $(__KERNEL_DS),%eax
 621         movl %eax,%ds
 622         movl %eax,%es
 623         cmpl $2,early_recursion_flag
 624         je hlt_loop
 625         incl early_recursion_flag
 626         pushl 16(%esp)
 627         pushl 24(%esp)
 628         pushl 32(%esp)
 629         pushl 40(%esp)
 630         pushl $int_msg
 631         call printk
 632
 633         call dump_stack
 634
 635         addl $(5*4),%esp
 636         popl %ds
 637         popl %es
 638         popl %edx
 639         popl %ecx
 640         popl %eax
 641 #endif
 642         iret
 643 ENDPROC(ignore_int)
 644 __INITDATA
 645         .align 4
 646 early_recursion_flag:
 647         .long 0
 648
 649 __REFDATA
 650         .align 4
 651 ENTRY(initial_code)
 652         .long i386_start_kernel
 653 ENTRY(setup_once_ref)
 654         .long setup_once
 655
 656 /*
 657  * BSS section
 658  */
 659 __PAGE_ALIGNED_BSS
 660         .align PAGE_SIZE
 661 #ifdef CONFIG_X86_PAE
 662 initial_pg_pmd:
 663         .fill 1024*KPMDS,4,0
 664 #else
 665 ENTRY(initial_page_table)
 666         .fill 1024,4,0
 667 #endif
 668 initial_pg_fixmap:
 669         .fill 1024,4,0
 670 ENTRY(empty_zero_page)
 671         .fill 4096,1,0
 672 ENTRY(swapper_pg_dir)
 673         .fill 1024,4,0
 674
 675 /*
 676  * This starts the data section.
 677  */
 678 #ifdef CONFIG_X86_PAE
 679 __PAGE_ALIGNED_DATA
 680         /* Page-aligned for the benefit of paravirt? */
 681         .align PAGE_SIZE
 682 ENTRY(initial_page_table)
 683         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR),0     /* low identity map */
 684 # if KPMDS == 3
 685         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR),0
 686         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
 687         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR+0x2000),0
 688 # elif KPMDS == 2
 689         .long   0,0
 690         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR),0
 691         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR+0x1000),0
 692 # elif KPMDS == 1
 693         .long   0,0
 694         .long   0,0
 695         .long   pa(initial_pg_pmd+PGD_IDENT_ATTR),0
 696 # else
 697 #  error "Kernel PMDs should be 1, 2 or 3"
 698 # endif
 699         .align PAGE_SIZE                /* needs to be page-sized too */
 700 #endif
 701
 702 .data
 703 .balign 4
 704 ENTRY(stack_start)
 705         .long init_thread_union+THREAD_SIZE
 706
 707 __INITRODATA
 708 int_msg:
 709         .asciz "Unknown interrupt or fault at: %p %p %p\n"
 710
 711 fault_msg:
 712 /* fault info: */
 713         .ascii "BUG: Int %d: CR2 %p\n"
 714 /* regs pushed in early_idt_handler: */
 715         .ascii "     EDI %p  ESI %p  EBP %p  EBX %p\n"
 716         .ascii "     ESP %p   ES %p   DS %p\n"
 717         .ascii "     EDX %p  ECX %p  EAX %p\n"
 718 /* fault frame: */
 719         .ascii "     vec %p  err %p  EIP %p   CS %p  flg %p\n"
 720         .ascii "Stack: %p %p %p %p %p %p %p %p\n"
 721         .ascii "       %p %p %p %p %p %p %p %p\n"
 722         .asciz "       %p %p %p %p %p %p %p %p\n"
 723
 724 #include "../../x86/xen/xen-head.S"
 725
 726 /*
 727  * The IDT and GDT 'descriptors' are a strange 48-bit object
 728  * only used by the lidt and lgdt instructions. They are not
 729  * like usual segment descriptors - they consist of a 16-bit
 730  * segment size, and 32-bit linear address value:
 731  */
 732
 733         .data
 734 .globl boot_gdt_descr
 735 .globl idt_descr
 736
 737         ALIGN
 738 # early boot GDT descriptor (must use 1:1 address mapping)
 739         .word 0                         # 32 bit align gdt_desc.address
 740 boot_gdt_descr:
 741         .word __BOOT_DS+7
 742         .long boot_gdt - __PAGE_OFFSET
 743
 744         .word 0                         # 32-bit align idt_desc.address
 745 idt_descr:
 746         .word IDT_ENTRIES*8-1           # idt contains 256 entries
 747         .long idt_table
 748
 749 # boot GDT descriptor (later on used by CPU#0):
 750         .word 0                         # 32 bit align gdt_desc.address
 751 ENTRY(early_gdt_descr)
 752         .word GDT_ENTRIES*8-1
 753         .long gdt_page                  /* Overwritten for secondary CPUs */
 754
 755 /*
 756  * The boot_gdt must mirror the equivalent in setup.S and is
 757  * used only for booting.
 758  */
 759         .align L1_CACHE_BYTES
 760 ENTRY(boot_gdt)
 761         .fill GDT_ENTRY_BOOT_CS,8,0
 762         .quad 0x00cf9a000000ffff        /* kernel 4GB code at 0x00000000 */
 763         .quad 0x00cf92000000ffff        /* kernel 4GB data at 0x00000000 */