arch/x86/kernel/mpparse.c

   1 /*
   2  *      Intel Multiprocessor Specification 1.1 and 1.4
   3  *      compliant MP-table parsing routines.
   4  *
   5  *      (c) 1995 Alan Cox, Building #3 <alan@lxorguk.ukuu.org.uk>
   6  *      (c) 1998, 1999, 2000, 2009 Ingo Molnar <mingo@redhat.com>
   7  *      (c) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
   8  */
   9
  10 #include <linux/mm.h>
  11 #include <linux/init.h>
  12 #include <linux/delay.h>
  13 #include <linux/bootmem.h>
  14 #include <linux/memblock.h>
  15 #include <linux/kernel_stat.h>
  16 #include <linux/mc146818rtc.h>
  17 #include <linux/bitops.h>
  18 #include <linux/acpi.h>
  19 #include <linux/smp.h>
  20 #include <linux/pci.h>
  21
  22 #include <asm/irqdomain.h>
  23 #include <asm/mtrr.h>
  24 #include <asm/mpspec.h>
  25 #include <asm/pgalloc.h>
  26 #include <asm/io_apic.h>
  27 #include <asm/proto.h>
  28 #include <asm/bios_ebda.h>
  29 #include <asm/e820.h>
  30 #include <asm/setup.h>
  31 #include <asm/smp.h>
  32
  33 #include <asm/apic.h>
  34 /*
  35  * Checksum an MP configuration block.
  36  */
  37
  38 static int __init mpf_checksum(unsigned char *mp, int len)
  39 {
  40         int sum = 0;
  41
  42         while (len--)
  43                 sum += *mp++;
  44
  45         return sum & 0xFF;
  46 }
  47
  48 int __init default_mpc_apic_id(struct mpc_cpu *m)
  49 {
  50         return m->apicid;
  51 }
  52
  53 static void __init MP_processor_info(struct mpc_cpu *m)
  54 {
  55         int apicid;
  56         char *bootup_cpu = "";
  57
  58         if (!(m->cpuflag & CPU_ENABLED)) {
  59                 disabled_cpus++;
  60                 return;
  61         }
  62
  63         apicid = x86_init.mpparse.mpc_apic_id(m);
  64
  65         if (m->cpuflag & CPU_BOOTPROCESSOR) {
  66                 bootup_cpu = " (Bootup-CPU)";
  67                 boot_cpu_physical_apicid = m->apicid;
  68         }
  69
  70         pr_info("Processor #%d%s\n", m->apicid, bootup_cpu);
  71         generic_processor_info(apicid, m->apicver);
  72 }
  73
  74 #ifdef CONFIG_X86_IO_APIC
  75 void __init default_mpc_oem_bus_info(struct mpc_bus *m, char *str)
  76 {
  77         memcpy(str, m->bustype, 6);
  78         str[6] = 0;
  79         apic_printk(APIC_VERBOSE, "Bus #%d is %s\n", m->busid, str);
  80 }
  81
  82 static void __init MP_bus_info(struct mpc_bus *m)
  83 {
  84         char str[7];
  85
  86         x86_init.mpparse.mpc_oem_bus_info(m, str);
  87
  88 #if MAX_MP_BUSSES < 256
  89         if (m->busid >= MAX_MP_BUSSES) {
  90                 pr_warn("MP table busid value (%d) for bustype %s is too large, max. supported is %d\n",
  91                         m->busid, str, MAX_MP_BUSSES - 1);
  92                 return;
  93         }
  94 #endif
  95
  96         set_bit(m->busid, mp_bus_not_pci);
  97         if (strncmp(str, BUSTYPE_ISA, sizeof(BUSTYPE_ISA) - 1) == 0) {
  98 #ifdef CONFIG_EISA
  99                 mp_bus_id_to_type[m->busid] = MP_BUS_ISA;
 100 #endif
 101         } else if (strncmp(str, BUSTYPE_PCI, sizeof(BUSTYPE_PCI) - 1) == 0) {
 102                 if (x86_init.mpparse.mpc_oem_pci_bus)
 103                         x86_init.mpparse.mpc_oem_pci_bus(m);
 104
 105                 clear_bit(m->busid, mp_bus_not_pci);
 106 #ifdef CONFIG_EISA
 107                 mp_bus_id_to_type[m->busid] = MP_BUS_PCI;
 108         } else if (strncmp(str, BUSTYPE_EISA, sizeof(BUSTYPE_EISA) - 1) == 0) {
 109                 mp_bus_id_to_type[m->busid] = MP_BUS_EISA;
 110 #endif
 111         } else
 112                 pr_warn("Unknown bustype %s - ignoring\n", str);
 113 }
 114
 115 static void __init MP_ioapic_info(struct mpc_ioapic *m)
 116 {
 117         struct ioapic_domain_cfg cfg = {
 118                 .type = IOAPIC_DOMAIN_LEGACY,
 119                 .ops = &mp_ioapic_irqdomain_ops,
 120         };
 121
 122         if (m->flags & MPC_APIC_USABLE)
 123                 mp_register_ioapic(m->apicid, m->apicaddr, gsi_top, &cfg);
 124 }
 125
 126 static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq)
 127 {
 128         apic_printk(APIC_VERBOSE,
 129                 "Int: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC INT %02x\n",
 130                 mp_irq->irqtype, mp_irq->irqflag & 3,
 131                 (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus,
 132                 mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq);
 133 }
 134
 135 #else /* CONFIG_X86_IO_APIC */
 136 static inline void __init MP_bus_info(struct mpc_bus *m) {}
 137 static inline void __init MP_ioapic_info(struct mpc_ioapic *m) {}
 138 #endif /* CONFIG_X86_IO_APIC */
 139
 140 static void __init MP_lintsrc_info(struct mpc_lintsrc *m)
 141 {
 142         apic_printk(APIC_VERBOSE,
 143                 "Lint: type %d, pol %d, trig %d, bus %02x, IRQ %02x, APIC ID %x, APIC LINT %02x\n",
 144                 m->irqtype, m->irqflag & 3, (m->irqflag >> 2) & 3, m->srcbusid,
 145                 m->srcbusirq, m->destapic, m->destapiclint);
 146 }
 147
 148 /*
 149  * Read/parse the MPC
 150  */
 151 static int __init smp_check_mpc(struct mpc_table *mpc, char *oem, char *str)
 152 {
 153
 154         if (memcmp(mpc->signature, MPC_SIGNATURE, 4)) {
 155                 pr_err("MPTABLE: bad signature [%c%c%c%c]!\n",
 156                        mpc->signature[0], mpc->signature[1],
 157                        mpc->signature[2], mpc->signature[3]);
 158                 return 0;
 159         }
 160         if (mpf_checksum((unsigned char *)mpc, mpc->length)) {
 161                 pr_err("MPTABLE: checksum error!\n");
 162                 return 0;
 163         }
 164         if (mpc->spec != 0x01 && mpc->spec != 0x04) {
 165                 pr_err("MPTABLE: bad table version (%d)!!\n", mpc->spec);
 166                 return 0;
 167         }
 168         if (!mpc->lapic) {
 169                 pr_err("MPTABLE: null local APIC address!\n");
 170                 return 0;
 171         }
 172         memcpy(oem, mpc->oem, 8);
 173         oem[8] = 0;
 174         pr_info("MPTABLE: OEM ID: %s\n", oem);
 175
 176         memcpy(str, mpc->productid, 12);
 177         str[12] = 0;
 178
 179         pr_info("MPTABLE: Product ID: %s\n", str);
 180
 181         pr_info("MPTABLE: APIC at: 0x%X\n", mpc->lapic);
 182
 183         return 1;
 184 }
 185
 186 static void skip_entry(unsigned char **ptr, int *count, int size)
 187 {
 188         *ptr += size;
 189         *count += size;
 190 }
 191
 192 static void __init smp_dump_mptable(struct mpc_table *mpc, unsigned char *mpt)
 193 {
 194         pr_err("Your mptable is wrong, contact your HW vendor!\n");
 195         pr_cont("type %x\n", *mpt);
 196         print_hex_dump(KERN_ERR, "  ", DUMP_PREFIX_ADDRESS, 16,
 197                         1, mpc, mpc->length, 1);
 198 }
 199
 200 void __init default_smp_read_mpc_oem(struct mpc_table *mpc) { }
 201
 202 static int __init smp_read_mpc(struct mpc_table *mpc, unsigned early)
 203 {
 204         char str[16];
 205         char oem[10];
 206
 207         int count = sizeof(*mpc);
 208         unsigned char *mpt = ((unsigned char *)mpc) + count;
 209
 210         if (!smp_check_mpc(mpc, oem, str))
 211                 return 0;
 212
 213         /* Initialize the lapic mapping */
 214         if (!acpi_lapic)
 215                 register_lapic_address(mpc->lapic);
 216
 217         if (early)
 218                 return 1;
 219
 220         if (mpc->oemptr)
 221                 x86_init.mpparse.smp_read_mpc_oem(mpc);
 222
 223         /*
 224          *      Now process the configuration blocks.
 225          */
 226         x86_init.mpparse.mpc_record(0);
 227
 228         while (count < mpc->length) {
 229                 switch (*mpt) {
 230                 case MP_PROCESSOR:
 231                         /* ACPI may have already provided this data */
 232                         if (!acpi_lapic)
 233                                 MP_processor_info((struct mpc_cpu *)mpt);
 234                         skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
 235                         break;
 236                 case MP_BUS:
 237                         MP_bus_info((struct mpc_bus *)mpt);
 238                         skip_entry(&mpt, &count, sizeof(struct mpc_bus));
 239                         break;
 240                 case MP_IOAPIC:
 241                         MP_ioapic_info((struct mpc_ioapic *)mpt);
 242                         skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
 243                         break;
 244                 case MP_INTSRC:
 245                         mp_save_irq((struct mpc_intsrc *)mpt);
 246                         skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
 247                         break;
 248                 case MP_LINTSRC:
 249                         MP_lintsrc_info((struct mpc_lintsrc *)mpt);
 250                         skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
 251                         break;
 252                 default:
 253                         /* wrong mptable */
 254                         smp_dump_mptable(mpc, mpt);
 255                         count = mpc->length;
 256                         break;
 257                 }
 258                 x86_init.mpparse.mpc_record(1);
 259         }
 260
 261         if (!num_processors)
 262                 pr_err("MPTABLE: no processors registered!\n");
 263         return num_processors;
 264 }
 265
 266 #ifdef CONFIG_X86_IO_APIC
 267
 268 static int __init ELCR_trigger(unsigned int irq)
 269 {
 270         unsigned int port;
 271
 272         port = 0x4d0 + (irq >> 3);
 273         return (inb(port) >> (irq & 7)) & 1;
 274 }
 275
 276 static void __init construct_default_ioirq_mptable(int mpc_default_type)
 277 {
 278         struct mpc_intsrc intsrc;
 279         int i;
 280         int ELCR_fallback = 0;
 281
 282         intsrc.type = MP_INTSRC;
 283         intsrc.irqflag = 0;     /* conforming */
 284         intsrc.srcbus = 0;
 285         intsrc.dstapic = mpc_ioapic_id(0);
 286
 287         intsrc.irqtype = mp_INT;
 288
 289         /*
 290          *  If true, we have an ISA/PCI system with no IRQ entries
 291          *  in the MP table. To prevent the PCI interrupts from being set up
 292          *  incorrectly, we try to use the ELCR. The sanity check to see if
 293          *  there is good ELCR data is very simple - IRQ0, 1, 2 and 13 can
 294          *  never be level sensitive, so we simply see if the ELCR agrees.
 295          *  If it does, we assume it's valid.
 296          */
 297         if (mpc_default_type == 5) {
 298                 pr_info("ISA/PCI bus type with no IRQ information... falling back to ELCR\n");
 299
 300                 if (ELCR_trigger(0) || ELCR_trigger(1) || ELCR_trigger(2) ||
 301                     ELCR_trigger(13))
 302                         pr_err("ELCR contains invalid data... not using ELCR\n");
 303                 else {
 304                         pr_info("Using ELCR to identify PCI interrupts\n");
 305                         ELCR_fallback = 1;
 306                 }
 307         }
 308
 309         for (i = 0; i < 16; i++) {
 310                 switch (mpc_default_type) {
 311                 case 2:
 312                         if (i == 0 || i == 13)
 313                                 continue;       /* IRQ0 & IRQ13 not connected */
 314                         /* fall through */
 315                 default:
 316                         if (i == 2)
 317                                 continue;       /* IRQ2 is never connected */
 318                 }
 319
 320                 if (ELCR_fallback) {
 321                         /*
 322                          *  If the ELCR indicates a level-sensitive interrupt, we
 323                          *  copy that information over to the MP table in the
 324                          *  irqflag field (level sensitive, active high polarity).
 325                          */
 326                         if (ELCR_trigger(i))
 327                                 intsrc.irqflag = 13;
 328                         else
 329                                 intsrc.irqflag = 0;
 330                 }
 331
 332                 intsrc.srcbusirq = i;
 333                 intsrc.dstirq = i ? i : 2;      /* IRQ0 to INTIN2 */
 334                 mp_save_irq(&intsrc);
 335         }
 336
 337         intsrc.irqtype = mp_ExtINT;
 338         intsrc.srcbusirq = 0;
 339         intsrc.dstirq = 0;      /* 8259A to INTIN0 */
 340         mp_save_irq(&intsrc);
 341 }
 342
 343
 344 static void __init construct_ioapic_table(int mpc_default_type)
 345 {
 346         struct mpc_ioapic ioapic;
 347         struct mpc_bus bus;
 348
 349         bus.type = MP_BUS;
 350         bus.busid = 0;
 351         switch (mpc_default_type) {
 352         default:
 353                 pr_err("???\nUnknown standard configuration %d\n",
 354                        mpc_default_type);
 355                 /* fall through */
 356         case 1:
 357         case 5:
 358                 memcpy(bus.bustype, "ISA   ", 6);
 359                 break;
 360         case 2:
 361         case 6:
 362         case 3:
 363                 memcpy(bus.bustype, "EISA  ", 6);
 364                 break;
 365         }
 366         MP_bus_info(&bus);
 367         if (mpc_default_type > 4) {
 368                 bus.busid = 1;
 369                 memcpy(bus.bustype, "PCI   ", 6);
 370                 MP_bus_info(&bus);
 371         }
 372
 373         ioapic.type     = MP_IOAPIC;
 374         ioapic.apicid   = 2;
 375         ioapic.apicver  = mpc_default_type > 4 ? 0x10 : 0x01;
 376         ioapic.flags    = MPC_APIC_USABLE;
 377         ioapic.apicaddr = IO_APIC_DEFAULT_PHYS_BASE;
 378         MP_ioapic_info(&ioapic);
 379
 380         /*
 381          * We set up most of the low 16 IO-APIC pins according to MPS rules.
 382          */
 383         construct_default_ioirq_mptable(mpc_default_type);
 384 }
 385 #else
 386 static inline void __init construct_ioapic_table(int mpc_default_type) { }
 387 #endif
 388
 389 static inline void __init construct_default_ISA_mptable(int mpc_default_type)
 390 {
 391         struct mpc_cpu processor;
 392         struct mpc_lintsrc lintsrc;
 393         int linttypes[2] = { mp_ExtINT, mp_NMI };
 394         int i;
 395
 396         /*
 397          * local APIC has default address
 398          */
 399         mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 400
 401         /*
 402          * 2 CPUs, numbered 0 & 1.
 403          */
 404         processor.type = MP_PROCESSOR;
 405         /* Either an integrated APIC or a discrete 82489DX. */
 406         processor.apicver = mpc_default_type > 4 ? 0x10 : 0x01;
 407         processor.cpuflag = CPU_ENABLED;
 408         processor.cpufeature = (boot_cpu_data.x86 << 8) |
 409             (boot_cpu_data.x86_model << 4) | boot_cpu_data.x86_mask;
 410         processor.featureflag = boot_cpu_data.x86_capability[CPUID_1_EDX];
 411         processor.reserved[0] = 0;
 412         processor.reserved[1] = 0;
 413         for (i = 0; i < 2; i++) {
 414                 processor.apicid = i;
 415                 MP_processor_info(&processor);
 416         }
 417
 418         construct_ioapic_table(mpc_default_type);
 419
 420         lintsrc.type = MP_LINTSRC;
 421         lintsrc.irqflag = 0;            /* conforming */
 422         lintsrc.srcbusid = 0;
 423         lintsrc.srcbusirq = 0;
 424         lintsrc.destapic = MP_APIC_ALL;
 425         for (i = 0; i < 2; i++) {
 426                 lintsrc.irqtype = linttypes[i];
 427                 lintsrc.destapiclint = i;
 428                 MP_lintsrc_info(&lintsrc);
 429         }
 430 }
 431
 432 static struct mpf_intel *mpf_found;
 433
 434 static unsigned long __init get_mpc_size(unsigned long physptr)
 435 {
 436         struct mpc_table *mpc;
 437         unsigned long size;
 438
 439         mpc = early_ioremap(physptr, PAGE_SIZE);
 440         size = mpc->length;
 441         early_iounmap(mpc, PAGE_SIZE);
 442         apic_printk(APIC_VERBOSE, "  mpc: %lx-%lx\n", physptr, physptr + size);
 443
 444         return size;
 445 }
 446
 447 static int __init check_physptr(struct mpf_intel *mpf, unsigned int early)
 448 {
 449         struct mpc_table *mpc;
 450         unsigned long size;
 451
 452         size = get_mpc_size(mpf->physptr);
 453         mpc = early_ioremap(mpf->physptr, size);
 454         /*
 455          * Read the physical hardware table.  Anything here will
 456          * override the defaults.
 457          */
 458         if (!smp_read_mpc(mpc, early)) {
 459 #ifdef CONFIG_X86_LOCAL_APIC
 460                 smp_found_config = 0;
 461 #endif
 462                 pr_err("BIOS bug, MP table errors detected!...\n");
 463                 pr_cont("... disabling SMP support. (tell your hw vendor)\n");
 464                 early_iounmap(mpc, size);
 465                 return -1;
 466         }
 467         early_iounmap(mpc, size);
 468
 469         if (early)
 470                 return -1;
 471
 472 #ifdef CONFIG_X86_IO_APIC
 473         /*
 474          * If there are no explicit MP IRQ entries, then we are
 475          * broken.  We set up most of the low 16 IO-APIC pins to
 476          * ISA defaults and hope it will work.
 477          */
 478         if (!mp_irq_entries) {
 479                 struct mpc_bus bus;
 480
 481                 pr_err("BIOS bug, no explicit IRQ entries, using default mptable. (tell your hw vendor)\n");
 482
 483                 bus.type = MP_BUS;
 484                 bus.busid = 0;
 485                 memcpy(bus.bustype, "ISA   ", 6);
 486                 MP_bus_info(&bus);
 487
 488                 construct_default_ioirq_mptable(0);
 489         }
 490 #endif
 491
 492         return 0;
 493 }
 494
 495 /*
 496  * Scan the memory blocks for an SMP configuration block.
 497  */
 498 void __init default_get_smp_config(unsigned int early)
 499 {
 500         struct mpf_intel *mpf = mpf_found;
 501
 502         if (!mpf)
 503                 return;
 504
 505         if (acpi_lapic && early)
 506                 return;
 507
 508         /*
 509          * MPS doesn't support hyperthreading, aka only have
 510          * thread 0 apic id in MPS table
 511          */
 512         if (acpi_lapic && acpi_ioapic)
 513                 return;
 514
 515         pr_info("Intel MultiProcessor Specification v1.%d\n",
 516                 mpf->specification);
 517 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32)
 518         if (mpf->feature2 & (1 << 7)) {
 519                 pr_info("    IMCR and PIC compatibility mode.\n");
 520                 pic_mode = 1;
 521         } else {
 522                 pr_info("    Virtual Wire compatibility mode.\n");
 523                 pic_mode = 0;
 524         }
 525 #endif
 526         /*
 527          * Now see if we need to read further.
 528          */
 529         if (mpf->feature1 != 0) {
 530                 if (early) {
 531                         /*
 532                          * local APIC has default address
 533                          */
 534                         mp_lapic_addr = APIC_DEFAULT_PHYS_BASE;
 535                         return;
 536                 }
 537
 538                 pr_info("Default MP configuration #%d\n", mpf->feature1);
 539                 construct_default_ISA_mptable(mpf->feature1);
 540
 541         } else if (mpf->physptr) {
 542                 if (check_physptr(mpf, early))
 543                         return;
 544         } else
 545                 BUG();
 546
 547         if (!early)
 548                 pr_info("Processors: %d\n", num_processors);
 549         /*
 550          * Only use the first configuration found.
 551          */
 552 }
 553
 554 static void __init smp_reserve_memory(struct mpf_intel *mpf)
 555 {
 556         memblock_reserve(mpf->physptr, get_mpc_size(mpf->physptr));
 557 }
 558
 559 static int __init smp_scan_config(unsigned long base, unsigned long length)
 560 {
 561         unsigned int *bp = phys_to_virt(base);
 562         struct mpf_intel *mpf;
 563         unsigned long mem;
 564
 565         apic_printk(APIC_VERBOSE, "Scan for SMP in [mem %#010lx-%#010lx]\n",
 566                     base, base + length - 1);
 567         BUILD_BUG_ON(sizeof(*mpf) != 16);
 568
 569         while (length > 0) {
 570                 mpf = (struct mpf_intel *)bp;
 571                 if ((*bp == SMP_MAGIC_IDENT) &&
 572                     (mpf->length == 1) &&
 573                     !mpf_checksum((unsigned char *)bp, 16) &&
 574                     ((mpf->specification == 1)
 575                      || (mpf->specification == 4))) {
 576 #ifdef CONFIG_X86_LOCAL_APIC
 577                         smp_found_config = 1;
 578 #endif
 579                         mpf_found = mpf;
 580
 581                         pr_info("found SMP MP-table at [mem %#010llx-%#010llx] mapped at [%p]\n",
 582                                 (unsigned long long) virt_to_phys(mpf),
 583                                 (unsigned long long) virt_to_phys(mpf) +
 584                                 sizeof(*mpf) - 1, mpf);
 585
 586                         mem = virt_to_phys(mpf);
 587                         memblock_reserve(mem, sizeof(*mpf));
 588                         if (mpf->physptr)
 589                                 smp_reserve_memory(mpf);
 590
 591                         return 1;
 592                 }
 593                 bp += 4;
 594                 length -= 16;
 595         }
 596         return 0;
 597 }
 598
 599 void __init default_find_smp_config(void)
 600 {
 601         unsigned int address;
 602
 603         /*
 604          * FIXME: Linux assumes you have 640K of base ram..
 605          * this continues the error...
 606          *
 607          * 1) Scan the bottom 1K for a signature
 608          * 2) Scan the top 1K of base RAM
 609          * 3) Scan the 64K of bios
 610          */
 611         if (smp_scan_config(0x0, 0x400) ||
 612             smp_scan_config(639 * 0x400, 0x400) ||
 613             smp_scan_config(0xF0000, 0x10000))
 614                 return;
 615         /*
 616          * If it is an SMP machine we should know now, unless the
 617          * configuration is in an EISA bus machine with an
 618          * extended bios data area.
 619          *
 620          * there is a real-mode segmented pointer pointing to the
 621          * 4K EBDA area at 0x40E, calculate and scan it here.
 622          *
 623          * NOTE! There are Linux loaders that will corrupt the EBDA
 624          * area, and as such this kind of SMP config may be less
 625          * trustworthy, simply because the SMP table may have been
 626          * stomped on during early boot. These loaders are buggy and
 627          * should be fixed.
 628          *
 629          * MP1.4 SPEC states to only scan first 1K of 4K EBDA.
 630          */
 631
 632         address = get_bios_ebda();
 633         if (address)
 634                 smp_scan_config(address, 0x400);
 635 }
 636
 637 #ifdef CONFIG_X86_IO_APIC
 638 static u8 __initdata irq_used[MAX_IRQ_SOURCES];
 639
 640 static int  __init get_MP_intsrc_index(struct mpc_intsrc *m)
 641 {
 642         int i;
 643
 644         if (m->irqtype != mp_INT)
 645                 return 0;
 646
 647         if (m->irqflag != 0x0f)
 648                 return 0;
 649
 650         /* not legacy */
 651
 652         for (i = 0; i < mp_irq_entries; i++) {
 653                 if (mp_irqs[i].irqtype != mp_INT)
 654                         continue;
 655
 656                 if (mp_irqs[i].irqflag != 0x0f)
 657                         continue;
 658
 659                 if (mp_irqs[i].srcbus != m->srcbus)
 660                         continue;
 661                 if (mp_irqs[i].srcbusirq != m->srcbusirq)
 662                         continue;
 663                 if (irq_used[i]) {
 664                         /* already claimed */
 665                         return -2;
 666                 }
 667                 irq_used[i] = 1;
 668                 return i;
 669         }
 670
 671         /* not found */
 672         return -1;
 673 }
 674
 675 #define SPARE_SLOT_NUM 20
 676
 677 static struct mpc_intsrc __initdata *m_spare[SPARE_SLOT_NUM];
 678
 679 static void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare)
 680 {
 681         int i;
 682
 683         apic_printk(APIC_VERBOSE, "OLD ");
 684         print_mp_irq_info(m);
 685
 686         i = get_MP_intsrc_index(m);
 687         if (i > 0) {
 688                 memcpy(m, &mp_irqs[i], sizeof(*m));
 689                 apic_printk(APIC_VERBOSE, "NEW ");
 690                 print_mp_irq_info(&mp_irqs[i]);
 691                 return;
 692         }
 693         if (!i) {
 694                 /* legacy, do nothing */
 695                 return;
 696         }
 697         if (*nr_m_spare < SPARE_SLOT_NUM) {
 698                 /*
 699                  * not found (-1), or duplicated (-2) are invalid entries,
 700                  * we need to use the slot later
 701                  */
 702                 m_spare[*nr_m_spare] = m;
 703                 *nr_m_spare += 1;
 704         }
 705 }
 706
 707 static int __init
 708 check_slot(unsigned long mpc_new_phys, unsigned long mpc_new_length, int count)
 709 {
 710         if (!mpc_new_phys || count <= mpc_new_length) {
 711                 WARN(1, "update_mptable: No spare slots (length: %x)\n", count);
 712                 return -1;
 713         }
 714
 715         return 0;
 716 }
 717 #else /* CONFIG_X86_IO_APIC */
 718 static
 719 inline void __init check_irq_src(struct mpc_intsrc *m, int *nr_m_spare) {}
 720 #endif /* CONFIG_X86_IO_APIC */
 721
 722 static int  __init replace_intsrc_all(struct mpc_table *mpc,
 723                                         unsigned long mpc_new_phys,
 724                                         unsigned long mpc_new_length)
 725 {
 726 #ifdef CONFIG_X86_IO_APIC
 727         int i;
 728 #endif
 729         int count = sizeof(*mpc);
 730         int nr_m_spare = 0;
 731         unsigned char *mpt = ((unsigned char *)mpc) + count;
 732
 733         pr_info("mpc_length %x\n", mpc->length);
 734         while (count < mpc->length) {
 735                 switch (*mpt) {
 736                 case MP_PROCESSOR:
 737                         skip_entry(&mpt, &count, sizeof(struct mpc_cpu));
 738                         break;
 739                 case MP_BUS:
 740                         skip_entry(&mpt, &count, sizeof(struct mpc_bus));
 741                         break;
 742                 case MP_IOAPIC:
 743                         skip_entry(&mpt, &count, sizeof(struct mpc_ioapic));
 744                         break;
 745                 case MP_INTSRC:
 746                         check_irq_src((struct mpc_intsrc *)mpt, &nr_m_spare);
 747                         skip_entry(&mpt, &count, sizeof(struct mpc_intsrc));
 748                         break;
 749                 case MP_LINTSRC:
 750                         skip_entry(&mpt, &count, sizeof(struct mpc_lintsrc));
 751                         break;
 752                 default:
 753                         /* wrong mptable */
 754                         smp_dump_mptable(mpc, mpt);
 755                         goto out;
 756                 }
 757         }
 758
 759 #ifdef CONFIG_X86_IO_APIC
 760         for (i = 0; i < mp_irq_entries; i++) {
 761                 if (irq_used[i])
 762                         continue;
 763
 764                 if (mp_irqs[i].irqtype != mp_INT)
 765                         continue;
 766
 767                 if (mp_irqs[i].irqflag != 0x0f)
 768                         continue;
 769
 770                 if (nr_m_spare > 0) {
 771                         apic_printk(APIC_VERBOSE, "*NEW* found\n");
 772                         nr_m_spare--;
 773                         memcpy(m_spare[nr_m_spare], &mp_irqs[i], sizeof(mp_irqs[i]));
 774                         m_spare[nr_m_spare] = NULL;
 775                 } else {
 776                         struct mpc_intsrc *m = (struct mpc_intsrc *)mpt;
 777                         count += sizeof(struct mpc_intsrc);
 778                         if (check_slot(mpc_new_phys, mpc_new_length, count) < 0)
 779                                 goto out;
 780                         memcpy(m, &mp_irqs[i], sizeof(*m));
 781                         mpc->length = count;
 782                         mpt += sizeof(struct mpc_intsrc);
 783                 }
 784                 print_mp_irq_info(&mp_irqs[i]);
 785         }
 786 #endif
 787 out:
 788         /* update checksum */
 789         mpc->checksum = 0;
 790         mpc->checksum -= mpf_checksum((unsigned char *)mpc, mpc->length);
 791
 792         return 0;
 793 }
 794
 795 int enable_update_mptable;
 796
 797 static int __init update_mptable_setup(char *str)
 798 {
 799         enable_update_mptable = 1;
 800 #ifdef CONFIG_PCI
 801         pci_routeirq = 1;
 802 #endif
 803         return 0;
 804 }
 805 early_param("update_mptable", update_mptable_setup);
 806
 807 static unsigned long __initdata mpc_new_phys;
 808 static unsigned long mpc_new_length __initdata = 4096;
 809
 810 /* alloc_mptable or alloc_mptable=4k */
 811 static int __initdata alloc_mptable;
 812 static int __init parse_alloc_mptable_opt(char *p)
 813 {
 814         enable_update_mptable = 1;
 815 #ifdef CONFIG_PCI
 816         pci_routeirq = 1;
 817 #endif
 818         alloc_mptable = 1;
 819         if (!p)
 820                 return 0;
 821         mpc_new_length = memparse(p, &p);
 822         return 0;
 823 }
 824 early_param("alloc_mptable", parse_alloc_mptable_opt);
 825
 826 void __init early_reserve_e820_mpc_new(void)
 827 {
 828         if (enable_update_mptable && alloc_mptable)
 829                 mpc_new_phys = early_reserve_e820(mpc_new_length, 4);
 830 }
 831
 832 static int __init update_mp_table(void)
 833 {
 834         char str[16];
 835         char oem[10];
 836         struct mpf_intel *mpf;
 837         struct mpc_table *mpc, *mpc_new;
 838
 839         if (!enable_update_mptable)
 840                 return 0;
 841
 842         mpf = mpf_found;
 843         if (!mpf)
 844                 return 0;
 845
 846         /*
 847          * Now see if we need to go further.
 848          */
 849         if (mpf->feature1 != 0)
 850                 return 0;
 851
 852         if (!mpf->physptr)
 853                 return 0;
 854
 855         mpc = phys_to_virt(mpf->physptr);
 856
 857         if (!smp_check_mpc(mpc, oem, str))
 858                 return 0;
 859
 860         pr_info("mpf: %llx\n", (u64)virt_to_phys(mpf));
 861         pr_info("physptr: %x\n", mpf->physptr);
 862
 863         if (mpc_new_phys && mpc->length > mpc_new_length) {
 864                 mpc_new_phys = 0;
 865                 pr_info("mpc_new_length is %ld, please use alloc_mptable=8k\n",
 866                         mpc_new_length);
 867         }
 868
 869         if (!mpc_new_phys) {
 870                 unsigned char old, new;
 871                 /* check if we can change the position */
 872                 mpc->checksum = 0;
 873                 old = mpf_checksum((unsigned char *)mpc, mpc->length);
 874                 mpc->checksum = 0xff;
 875                 new = mpf_checksum((unsigned char *)mpc, mpc->length);
 876                 if (old == new) {
 877                         pr_info("mpc is readonly, please try alloc_mptable instead\n");
 878                         return 0;
 879                 }
 880                 pr_info("use in-position replacing\n");
 881         } else {
 882                 mpf->physptr = mpc_new_phys;
 883                 mpc_new = phys_to_virt(mpc_new_phys);
 884                 memcpy(mpc_new, mpc, mpc->length);
 885                 mpc = mpc_new;
 886                 /* check if we can modify that */
 887                 if (mpc_new_phys - mpf->physptr) {
 888                         struct mpf_intel *mpf_new;
 889                         /* steal 16 bytes from [0, 1k) */
 890                         pr_info("mpf new: %x\n", 0x400 - 16);
 891                         mpf_new = phys_to_virt(0x400 - 16);
 892                         memcpy(mpf_new, mpf, 16);
 893                         mpf = mpf_new;
 894                         mpf->physptr = mpc_new_phys;
 895                 }
 896                 mpf->checksum = 0;
 897                 mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16);
 898                 pr_info("physptr new: %x\n", mpf->physptr);
 899         }
 900
 901         /*
 902          * only replace the one with mp_INT and
 903          *       MP_IRQ_TRIGGER_LEVEL|MP_IRQ_POLARITY_LOW,
 904          * already in mp_irqs , stored by ... and mp_config_acpi_gsi,
 905          * may need pci=routeirq for all coverage
 906          */
 907         replace_intsrc_all(mpc, mpc_new_phys, mpc_new_length);
 908
 909         return 0;
 910 }
 911
 912 late_initcall(update_mp_table);