]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - arch/x86/kernel/traps.c
Merge remote branch 'nouveau/for-airlied' into drm-linus
[mirror_ubuntu-bionic-kernel.git] / arch / x86 / kernel / traps.c
1 /*
2 * Copyright (C) 1991, 1992 Linus Torvalds
3 * Copyright (C) 2000, 2001, 2002 Andi Kleen, SuSE Labs
4 *
5 * Pentium III FXSR, SSE support
6 * Gareth Hughes <gareth@valinux.com>, May 2000
7 */
8
9 /*
10 * Handle hardware traps and faults.
11 */
12 #include <linux/interrupt.h>
13 #include <linux/kallsyms.h>
14 #include <linux/spinlock.h>
15 #include <linux/kprobes.h>
16 #include <linux/uaccess.h>
17 #include <linux/kdebug.h>
18 #include <linux/kernel.h>
19 #include <linux/module.h>
20 #include <linux/ptrace.h>
21 #include <linux/string.h>
22 #include <linux/delay.h>
23 #include <linux/errno.h>
24 #include <linux/kexec.h>
25 #include <linux/sched.h>
26 #include <linux/timer.h>
27 #include <linux/init.h>
28 #include <linux/bug.h>
29 #include <linux/nmi.h>
30 #include <linux/mm.h>
31 #include <linux/smp.h>
32 #include <linux/io.h>
33
34 #ifdef CONFIG_EISA
35 #include <linux/ioport.h>
36 #include <linux/eisa.h>
37 #endif
38
39 #ifdef CONFIG_MCA
40 #include <linux/mca.h>
41 #endif
42
43 #if defined(CONFIG_EDAC)
44 #include <linux/edac.h>
45 #endif
46
47 #include <asm/kmemcheck.h>
48 #include <asm/stacktrace.h>
49 #include <asm/processor.h>
50 #include <asm/debugreg.h>
51 #include <asm/atomic.h>
52 #include <asm/system.h>
53 #include <asm/traps.h>
54 #include <asm/desc.h>
55 #include <asm/i387.h>
56 #include <asm/mce.h>
57
58 #include <asm/mach_traps.h>
59
60 #ifdef CONFIG_X86_64
61 #include <asm/x86_init.h>
62 #include <asm/pgalloc.h>
63 #include <asm/proto.h>
64 #else
65 #include <asm/processor-flags.h>
66 #include <asm/setup.h>
67
68 asmlinkage int system_call(void);
69
70 /* Do we ignore FPU interrupts ? */
71 char ignore_fpu_irq;
72
73 /*
74 * The IDT has to be page-aligned to simplify the Pentium
75 * F0 0F bug workaround.
76 */
77 gate_desc idt_table[NR_VECTORS] __page_aligned_data = { { { { 0, 0 } } }, };
78 #endif
79
80 DECLARE_BITMAP(used_vectors, NR_VECTORS);
81 EXPORT_SYMBOL_GPL(used_vectors);
82
83 static int ignore_nmis;
84
85 static inline void conditional_sti(struct pt_regs *regs)
86 {
87 if (regs->flags & X86_EFLAGS_IF)
88 local_irq_enable();
89 }
90
91 static inline void preempt_conditional_sti(struct pt_regs *regs)
92 {
93 inc_preempt_count();
94 if (regs->flags & X86_EFLAGS_IF)
95 local_irq_enable();
96 }
97
98 static inline void conditional_cli(struct pt_regs *regs)
99 {
100 if (regs->flags & X86_EFLAGS_IF)
101 local_irq_disable();
102 }
103
104 static inline void preempt_conditional_cli(struct pt_regs *regs)
105 {
106 if (regs->flags & X86_EFLAGS_IF)
107 local_irq_disable();
108 dec_preempt_count();
109 }
110
111 #ifdef CONFIG_X86_32
112 static inline void
113 die_if_kernel(const char *str, struct pt_regs *regs, long err)
114 {
115 if (!user_mode_vm(regs))
116 die(str, regs, err);
117 }
118 #endif
119
120 static void __kprobes
121 do_trap(int trapnr, int signr, char *str, struct pt_regs *regs,
122 long error_code, siginfo_t *info)
123 {
124 struct task_struct *tsk = current;
125
126 #ifdef CONFIG_X86_32
127 if (regs->flags & X86_VM_MASK) {
128 /*
129 * traps 0, 1, 3, 4, and 5 should be forwarded to vm86.
130 * On nmi (interrupt 2), do_trap should not be called.
131 */
132 if (trapnr < 6)
133 goto vm86_trap;
134 goto trap_signal;
135 }
136 #endif
137
138 if (!user_mode(regs))
139 goto kernel_trap;
140
141 #ifdef CONFIG_X86_32
142 trap_signal:
143 #endif
144 /*
145 * We want error_code and trap_no set for userspace faults and
146 * kernelspace faults which result in die(), but not
147 * kernelspace faults which are fixed up. die() gives the
148 * process no chance to handle the signal and notice the
149 * kernel fault information, so that won't result in polluting
150 * the information about previously queued, but not yet
151 * delivered, faults. See also do_general_protection below.
152 */
153 tsk->thread.error_code = error_code;
154 tsk->thread.trap_no = trapnr;
155
156 #ifdef CONFIG_X86_64
157 if (show_unhandled_signals && unhandled_signal(tsk, signr) &&
158 printk_ratelimit()) {
159 printk(KERN_INFO
160 "%s[%d] trap %s ip:%lx sp:%lx error:%lx",
161 tsk->comm, tsk->pid, str,
162 regs->ip, regs->sp, error_code);
163 print_vma_addr(" in ", regs->ip);
164 printk("\n");
165 }
166 #endif
167
168 if (info)
169 force_sig_info(signr, info, tsk);
170 else
171 force_sig(signr, tsk);
172 return;
173
174 kernel_trap:
175 if (!fixup_exception(regs)) {
176 tsk->thread.error_code = error_code;
177 tsk->thread.trap_no = trapnr;
178 die(str, regs, error_code);
179 }
180 return;
181
182 #ifdef CONFIG_X86_32
183 vm86_trap:
184 if (handle_vm86_trap((struct kernel_vm86_regs *) regs,
185 error_code, trapnr))
186 goto trap_signal;
187 return;
188 #endif
189 }
190
191 #define DO_ERROR(trapnr, signr, str, name) \
192 dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
193 { \
194 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
195 == NOTIFY_STOP) \
196 return; \
197 conditional_sti(regs); \
198 do_trap(trapnr, signr, str, regs, error_code, NULL); \
199 }
200
201 #define DO_ERROR_INFO(trapnr, signr, str, name, sicode, siaddr) \
202 dotraplinkage void do_##name(struct pt_regs *regs, long error_code) \
203 { \
204 siginfo_t info; \
205 info.si_signo = signr; \
206 info.si_errno = 0; \
207 info.si_code = sicode; \
208 info.si_addr = (void __user *)siaddr; \
209 if (notify_die(DIE_TRAP, str, regs, error_code, trapnr, signr) \
210 == NOTIFY_STOP) \
211 return; \
212 conditional_sti(regs); \
213 do_trap(trapnr, signr, str, regs, error_code, &info); \
214 }
215
216 DO_ERROR_INFO(0, SIGFPE, "divide error", divide_error, FPE_INTDIV, regs->ip)
217 DO_ERROR(4, SIGSEGV, "overflow", overflow)
218 DO_ERROR(5, SIGSEGV, "bounds", bounds)
219 DO_ERROR_INFO(6, SIGILL, "invalid opcode", invalid_op, ILL_ILLOPN, regs->ip)
220 DO_ERROR(9, SIGFPE, "coprocessor segment overrun", coprocessor_segment_overrun)
221 DO_ERROR(10, SIGSEGV, "invalid TSS", invalid_TSS)
222 DO_ERROR(11, SIGBUS, "segment not present", segment_not_present)
223 #ifdef CONFIG_X86_32
224 DO_ERROR(12, SIGBUS, "stack segment", stack_segment)
225 #endif
226 DO_ERROR_INFO(17, SIGBUS, "alignment check", alignment_check, BUS_ADRALN, 0)
227
228 #ifdef CONFIG_X86_64
229 /* Runs on IST stack */
230 dotraplinkage void do_stack_segment(struct pt_regs *regs, long error_code)
231 {
232 if (notify_die(DIE_TRAP, "stack segment", regs, error_code,
233 12, SIGBUS) == NOTIFY_STOP)
234 return;
235 preempt_conditional_sti(regs);
236 do_trap(12, SIGBUS, "stack segment", regs, error_code, NULL);
237 preempt_conditional_cli(regs);
238 }
239
240 dotraplinkage void do_double_fault(struct pt_regs *regs, long error_code)
241 {
242 static const char str[] = "double fault";
243 struct task_struct *tsk = current;
244
245 /* Return not checked because double check cannot be ignored */
246 notify_die(DIE_TRAP, str, regs, error_code, 8, SIGSEGV);
247
248 tsk->thread.error_code = error_code;
249 tsk->thread.trap_no = 8;
250
251 /*
252 * This is always a kernel trap and never fixable (and thus must
253 * never return).
254 */
255 for (;;)
256 die(str, regs, error_code);
257 }
258 #endif
259
260 dotraplinkage void __kprobes
261 do_general_protection(struct pt_regs *regs, long error_code)
262 {
263 struct task_struct *tsk;
264
265 conditional_sti(regs);
266
267 #ifdef CONFIG_X86_32
268 if (regs->flags & X86_VM_MASK)
269 goto gp_in_vm86;
270 #endif
271
272 tsk = current;
273 if (!user_mode(regs))
274 goto gp_in_kernel;
275
276 tsk->thread.error_code = error_code;
277 tsk->thread.trap_no = 13;
278
279 if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) &&
280 printk_ratelimit()) {
281 printk(KERN_INFO
282 "%s[%d] general protection ip:%lx sp:%lx error:%lx",
283 tsk->comm, task_pid_nr(tsk),
284 regs->ip, regs->sp, error_code);
285 print_vma_addr(" in ", regs->ip);
286 printk("\n");
287 }
288
289 force_sig(SIGSEGV, tsk);
290 return;
291
292 #ifdef CONFIG_X86_32
293 gp_in_vm86:
294 local_irq_enable();
295 handle_vm86_fault((struct kernel_vm86_regs *) regs, error_code);
296 return;
297 #endif
298
299 gp_in_kernel:
300 if (fixup_exception(regs))
301 return;
302
303 tsk->thread.error_code = error_code;
304 tsk->thread.trap_no = 13;
305 if (notify_die(DIE_GPF, "general protection fault", regs,
306 error_code, 13, SIGSEGV) == NOTIFY_STOP)
307 return;
308 die("general protection fault", regs, error_code);
309 }
310
311 static notrace __kprobes void
312 mem_parity_error(unsigned char reason, struct pt_regs *regs)
313 {
314 printk(KERN_EMERG
315 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
316 reason, smp_processor_id());
317
318 printk(KERN_EMERG
319 "You have some hardware problem, likely on the PCI bus.\n");
320
321 #if defined(CONFIG_EDAC)
322 if (edac_handler_set()) {
323 edac_atomic_assert_error();
324 return;
325 }
326 #endif
327
328 if (panic_on_unrecovered_nmi)
329 panic("NMI: Not continuing");
330
331 printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
332
333 /* Clear and disable the memory parity error line. */
334 reason = (reason & 0xf) | 4;
335 outb(reason, 0x61);
336 }
337
338 static notrace __kprobes void
339 io_check_error(unsigned char reason, struct pt_regs *regs)
340 {
341 unsigned long i;
342
343 printk(KERN_EMERG "NMI: IOCK error (debug interrupt?)\n");
344 show_registers(regs);
345
346 if (panic_on_io_nmi)
347 panic("NMI IOCK error: Not continuing");
348
349 /* Re-enable the IOCK line, wait for a few seconds */
350 reason = (reason & 0xf) | 8;
351 outb(reason, 0x61);
352
353 i = 2000;
354 while (--i)
355 udelay(1000);
356
357 reason &= ~8;
358 outb(reason, 0x61);
359 }
360
361 static notrace __kprobes void
362 unknown_nmi_error(unsigned char reason, struct pt_regs *regs)
363 {
364 if (notify_die(DIE_NMIUNKNOWN, "nmi", regs, reason, 2, SIGINT) ==
365 NOTIFY_STOP)
366 return;
367 #ifdef CONFIG_MCA
368 /*
369 * Might actually be able to figure out what the guilty party
370 * is:
371 */
372 if (MCA_bus) {
373 mca_handle_nmi();
374 return;
375 }
376 #endif
377 printk(KERN_EMERG
378 "Uhhuh. NMI received for unknown reason %02x on CPU %d.\n",
379 reason, smp_processor_id());
380
381 printk(KERN_EMERG "Do you have a strange power saving mode enabled?\n");
382 if (panic_on_unrecovered_nmi)
383 panic("NMI: Not continuing");
384
385 printk(KERN_EMERG "Dazed and confused, but trying to continue\n");
386 }
387
388 static notrace __kprobes void default_do_nmi(struct pt_regs *regs)
389 {
390 unsigned char reason = 0;
391 int cpu;
392
393 cpu = smp_processor_id();
394
395 /* Only the BSP gets external NMIs from the system. */
396 if (!cpu)
397 reason = get_nmi_reason();
398
399 if (!(reason & 0xc0)) {
400 if (notify_die(DIE_NMI_IPI, "nmi_ipi", regs, reason, 2, SIGINT)
401 == NOTIFY_STOP)
402 return;
403 #ifdef CONFIG_X86_LOCAL_APIC
404 /*
405 * Ok, so this is none of the documented NMI sources,
406 * so it must be the NMI watchdog.
407 */
408 if (nmi_watchdog_tick(regs, reason))
409 return;
410 if (!do_nmi_callback(regs, cpu))
411 unknown_nmi_error(reason, regs);
412 #else
413 unknown_nmi_error(reason, regs);
414 #endif
415
416 return;
417 }
418 if (notify_die(DIE_NMI, "nmi", regs, reason, 2, SIGINT) == NOTIFY_STOP)
419 return;
420
421 /* AK: following checks seem to be broken on modern chipsets. FIXME */
422 if (reason & 0x80)
423 mem_parity_error(reason, regs);
424 if (reason & 0x40)
425 io_check_error(reason, regs);
426 #ifdef CONFIG_X86_32
427 /*
428 * Reassert NMI in case it became active meanwhile
429 * as it's edge-triggered:
430 */
431 reassert_nmi();
432 #endif
433 }
434
435 dotraplinkage notrace __kprobes void
436 do_nmi(struct pt_regs *regs, long error_code)
437 {
438 nmi_enter();
439
440 inc_irq_stat(__nmi_count);
441
442 if (!ignore_nmis)
443 default_do_nmi(regs);
444
445 nmi_exit();
446 }
447
448 void stop_nmi(void)
449 {
450 acpi_nmi_disable();
451 ignore_nmis++;
452 }
453
454 void restart_nmi(void)
455 {
456 ignore_nmis--;
457 acpi_nmi_enable();
458 }
459
460 /* May run on IST stack. */
461 dotraplinkage void __kprobes do_int3(struct pt_regs *regs, long error_code)
462 {
463 #ifdef CONFIG_KPROBES
464 if (notify_die(DIE_INT3, "int3", regs, error_code, 3, SIGTRAP)
465 == NOTIFY_STOP)
466 return;
467 #else
468 if (notify_die(DIE_TRAP, "int3", regs, error_code, 3, SIGTRAP)
469 == NOTIFY_STOP)
470 return;
471 #endif
472
473 preempt_conditional_sti(regs);
474 do_trap(3, SIGTRAP, "int3", regs, error_code, NULL);
475 preempt_conditional_cli(regs);
476 }
477
478 #ifdef CONFIG_X86_64
479 /*
480 * Help handler running on IST stack to switch back to user stack
481 * for scheduling or signal handling. The actual stack switch is done in
482 * entry.S
483 */
484 asmlinkage __kprobes struct pt_regs *sync_regs(struct pt_regs *eregs)
485 {
486 struct pt_regs *regs = eregs;
487 /* Did already sync */
488 if (eregs == (struct pt_regs *)eregs->sp)
489 ;
490 /* Exception from user space */
491 else if (user_mode(eregs))
492 regs = task_pt_regs(current);
493 /*
494 * Exception from kernel and interrupts are enabled. Move to
495 * kernel process stack.
496 */
497 else if (eregs->flags & X86_EFLAGS_IF)
498 regs = (struct pt_regs *)(eregs->sp -= sizeof(struct pt_regs));
499 if (eregs != regs)
500 *regs = *eregs;
501 return regs;
502 }
503 #endif
504
505 /*
506 * Our handling of the processor debug registers is non-trivial.
507 * We do not clear them on entry and exit from the kernel. Therefore
508 * it is possible to get a watchpoint trap here from inside the kernel.
509 * However, the code in ./ptrace.c has ensured that the user can
510 * only set watchpoints on userspace addresses. Therefore the in-kernel
511 * watchpoint trap can only occur in code which is reading/writing
512 * from user space. Such code must not hold kernel locks (since it
513 * can equally take a page fault), therefore it is safe to call
514 * force_sig_info even though that claims and releases locks.
515 *
516 * Code in ./signal.c ensures that the debug control register
517 * is restored before we deliver any signal, and therefore that
518 * user code runs with the correct debug control register even though
519 * we clear it here.
520 *
521 * Being careful here means that we don't have to be as careful in a
522 * lot of more complicated places (task switching can be a bit lazy
523 * about restoring all the debug state, and ptrace doesn't have to
524 * find every occurrence of the TF bit that could be saved away even
525 * by user code)
526 *
527 * May run on IST stack.
528 */
529 dotraplinkage void __kprobes do_debug(struct pt_regs *regs, long error_code)
530 {
531 struct task_struct *tsk = current;
532 unsigned long dr6;
533 int si_code;
534
535 get_debugreg(dr6, 6);
536
537 /* Catch kmemcheck conditions first of all! */
538 if ((dr6 & DR_STEP) && kmemcheck_trap(regs))
539 return;
540
541 /* DR6 may or may not be cleared by the CPU */
542 set_debugreg(0, 6);
543 /*
544 * The processor cleared BTF, so don't mark that we need it set.
545 */
546 clear_tsk_thread_flag(tsk, TIF_DEBUGCTLMSR);
547 tsk->thread.debugctlmsr = 0;
548
549 /* Store the virtualized DR6 value */
550 tsk->thread.debugreg6 = dr6;
551
552 if (notify_die(DIE_DEBUG, "debug", regs, PTR_ERR(&dr6), error_code,
553 SIGTRAP) == NOTIFY_STOP)
554 return;
555
556 /* It's safe to allow irq's after DR6 has been saved */
557 preempt_conditional_sti(regs);
558
559 if (regs->flags & X86_VM_MASK) {
560 handle_vm86_trap((struct kernel_vm86_regs *) regs,
561 error_code, 1);
562 return;
563 }
564
565 /*
566 * Single-stepping through system calls: ignore any exceptions in
567 * kernel space, but re-enable TF when returning to user mode.
568 *
569 * We already checked v86 mode above, so we can check for kernel mode
570 * by just checking the CPL of CS.
571 */
572 if ((dr6 & DR_STEP) && !user_mode(regs)) {
573 tsk->thread.debugreg6 &= ~DR_STEP;
574 set_tsk_thread_flag(tsk, TIF_SINGLESTEP);
575 regs->flags &= ~X86_EFLAGS_TF;
576 }
577 si_code = get_si_code(tsk->thread.debugreg6);
578 if (tsk->thread.debugreg6 & (DR_STEP | DR_TRAP_BITS))
579 send_sigtrap(tsk, regs, error_code, si_code);
580 preempt_conditional_cli(regs);
581
582 return;
583 }
584
585 #ifdef CONFIG_X86_64
586 static int kernel_math_error(struct pt_regs *regs, const char *str, int trapnr)
587 {
588 if (fixup_exception(regs))
589 return 1;
590
591 notify_die(DIE_GPF, str, regs, 0, trapnr, SIGFPE);
592 /* Illegal floating point operation in the kernel */
593 current->thread.trap_no = trapnr;
594 die(str, regs, 0);
595 return 0;
596 }
597 #endif
598
599 /*
600 * Note that we play around with the 'TS' bit in an attempt to get
601 * the correct behaviour even in the presence of the asynchronous
602 * IRQ13 behaviour
603 */
604 void math_error(void __user *ip)
605 {
606 struct task_struct *task;
607 siginfo_t info;
608 unsigned short cwd, swd, err;
609
610 /*
611 * Save the info for the exception handler and clear the error.
612 */
613 task = current;
614 save_init_fpu(task);
615 task->thread.trap_no = 16;
616 task->thread.error_code = 0;
617 info.si_signo = SIGFPE;
618 info.si_errno = 0;
619 info.si_addr = ip;
620 /*
621 * (~cwd & swd) will mask out exceptions that are not set to unmasked
622 * status. 0x3f is the exception bits in these regs, 0x200 is the
623 * C1 reg you need in case of a stack fault, 0x040 is the stack
624 * fault bit. We should only be taking one exception at a time,
625 * so if this combination doesn't produce any single exception,
626 * then we have a bad program that isn't synchronizing its FPU usage
627 * and it will suffer the consequences since we won't be able to
628 * fully reproduce the context of the exception
629 */
630 cwd = get_fpu_cwd(task);
631 swd = get_fpu_swd(task);
632
633 err = swd & ~cwd;
634
635 if (err & 0x001) { /* Invalid op */
636 /*
637 * swd & 0x240 == 0x040: Stack Underflow
638 * swd & 0x240 == 0x240: Stack Overflow
639 * User must clear the SF bit (0x40) if set
640 */
641 info.si_code = FPE_FLTINV;
642 } else if (err & 0x004) { /* Divide by Zero */
643 info.si_code = FPE_FLTDIV;
644 } else if (err & 0x008) { /* Overflow */
645 info.si_code = FPE_FLTOVF;
646 } else if (err & 0x012) { /* Denormal, Underflow */
647 info.si_code = FPE_FLTUND;
648 } else if (err & 0x020) { /* Precision */
649 info.si_code = FPE_FLTRES;
650 } else {
651 /*
652 * If we're using IRQ 13, or supposedly even some trap 16
653 * implementations, it's possible we get a spurious trap...
654 */
655 return; /* Spurious trap, no error */
656 }
657 force_sig_info(SIGFPE, &info, task);
658 }
659
660 dotraplinkage void do_coprocessor_error(struct pt_regs *regs, long error_code)
661 {
662 conditional_sti(regs);
663
664 #ifdef CONFIG_X86_32
665 ignore_fpu_irq = 1;
666 #else
667 if (!user_mode(regs) &&
668 kernel_math_error(regs, "kernel x87 math error", 16))
669 return;
670 #endif
671
672 math_error((void __user *)regs->ip);
673 }
674
675 static void simd_math_error(void __user *ip)
676 {
677 struct task_struct *task;
678 siginfo_t info;
679 unsigned short mxcsr;
680
681 /*
682 * Save the info for the exception handler and clear the error.
683 */
684 task = current;
685 save_init_fpu(task);
686 task->thread.trap_no = 19;
687 task->thread.error_code = 0;
688 info.si_signo = SIGFPE;
689 info.si_errno = 0;
690 info.si_code = __SI_FAULT;
691 info.si_addr = ip;
692 /*
693 * The SIMD FPU exceptions are handled a little differently, as there
694 * is only a single status/control register. Thus, to determine which
695 * unmasked exception was caught we must mask the exception mask bits
696 * at 0x1f80, and then use these to mask the exception bits at 0x3f.
697 */
698 mxcsr = get_fpu_mxcsr(task);
699 switch (~((mxcsr & 0x1f80) >> 7) & (mxcsr & 0x3f)) {
700 case 0x000:
701 default:
702 break;
703 case 0x001: /* Invalid Op */
704 info.si_code = FPE_FLTINV;
705 break;
706 case 0x002: /* Denormalize */
707 case 0x010: /* Underflow */
708 info.si_code = FPE_FLTUND;
709 break;
710 case 0x004: /* Zero Divide */
711 info.si_code = FPE_FLTDIV;
712 break;
713 case 0x008: /* Overflow */
714 info.si_code = FPE_FLTOVF;
715 break;
716 case 0x020: /* Precision */
717 info.si_code = FPE_FLTRES;
718 break;
719 }
720 force_sig_info(SIGFPE, &info, task);
721 }
722
723 dotraplinkage void
724 do_simd_coprocessor_error(struct pt_regs *regs, long error_code)
725 {
726 conditional_sti(regs);
727
728 #ifdef CONFIG_X86_32
729 if (cpu_has_xmm) {
730 /* Handle SIMD FPU exceptions on PIII+ processors. */
731 ignore_fpu_irq = 1;
732 simd_math_error((void __user *)regs->ip);
733 return;
734 }
735 /*
736 * Handle strange cache flush from user space exception
737 * in all other cases. This is undocumented behaviour.
738 */
739 if (regs->flags & X86_VM_MASK) {
740 handle_vm86_fault((struct kernel_vm86_regs *)regs, error_code);
741 return;
742 }
743 current->thread.trap_no = 19;
744 current->thread.error_code = error_code;
745 die_if_kernel("cache flush denied", regs, error_code);
746 force_sig(SIGSEGV, current);
747 #else
748 if (!user_mode(regs) &&
749 kernel_math_error(regs, "kernel simd math error", 19))
750 return;
751 simd_math_error((void __user *)regs->ip);
752 #endif
753 }
754
755 dotraplinkage void
756 do_spurious_interrupt_bug(struct pt_regs *regs, long error_code)
757 {
758 conditional_sti(regs);
759 #if 0
760 /* No need to warn about this any longer. */
761 printk(KERN_INFO "Ignoring P6 Local APIC Spurious Interrupt Bug...\n");
762 #endif
763 }
764
765 asmlinkage void __attribute__((weak)) smp_thermal_interrupt(void)
766 {
767 }
768
769 asmlinkage void __attribute__((weak)) smp_threshold_interrupt(void)
770 {
771 }
772
773 /*
774 * __math_state_restore assumes that cr0.TS is already clear and the
775 * fpu state is all ready for use. Used during context switch.
776 */
777 void __math_state_restore(void)
778 {
779 struct thread_info *thread = current_thread_info();
780 struct task_struct *tsk = thread->task;
781
782 /*
783 * Paranoid restore. send a SIGSEGV if we fail to restore the state.
784 */
785 if (unlikely(restore_fpu_checking(tsk))) {
786 stts();
787 force_sig(SIGSEGV, tsk);
788 return;
789 }
790
791 thread->status |= TS_USEDFPU; /* So we fnsave on switch_to() */
792 tsk->fpu_counter++;
793 }
794
795 /*
796 * 'math_state_restore()' saves the current math information in the
797 * old math state array, and gets the new ones from the current task
798 *
799 * Careful.. There are problems with IBM-designed IRQ13 behaviour.
800 * Don't touch unless you *really* know how it works.
801 *
802 * Must be called with kernel preemption disabled (in this case,
803 * local interrupts are disabled at the call-site in entry.S).
804 */
805 asmlinkage void math_state_restore(void)
806 {
807 struct thread_info *thread = current_thread_info();
808 struct task_struct *tsk = thread->task;
809
810 if (!tsk_used_math(tsk)) {
811 local_irq_enable();
812 /*
813 * does a slab alloc which can sleep
814 */
815 if (init_fpu(tsk)) {
816 /*
817 * ran out of memory!
818 */
819 do_group_exit(SIGKILL);
820 return;
821 }
822 local_irq_disable();
823 }
824
825 clts(); /* Allow maths ops (or we recurse) */
826
827 __math_state_restore();
828 }
829 EXPORT_SYMBOL_GPL(math_state_restore);
830
831 #ifndef CONFIG_MATH_EMULATION
832 void math_emulate(struct math_emu_info *info)
833 {
834 printk(KERN_EMERG
835 "math-emulation not enabled and no coprocessor found.\n");
836 printk(KERN_EMERG "killing %s.\n", current->comm);
837 force_sig(SIGFPE, current);
838 schedule();
839 }
840 #endif /* CONFIG_MATH_EMULATION */
841
842 dotraplinkage void __kprobes
843 do_device_not_available(struct pt_regs *regs, long error_code)
844 {
845 #ifdef CONFIG_X86_32
846 if (read_cr0() & X86_CR0_EM) {
847 struct math_emu_info info = { };
848
849 conditional_sti(regs);
850
851 info.regs = regs;
852 math_emulate(&info);
853 } else {
854 math_state_restore(); /* interrupts still off */
855 conditional_sti(regs);
856 }
857 #else
858 math_state_restore();
859 #endif
860 }
861
862 #ifdef CONFIG_X86_32
863 dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
864 {
865 siginfo_t info;
866 local_irq_enable();
867
868 info.si_signo = SIGILL;
869 info.si_errno = 0;
870 info.si_code = ILL_BADSTK;
871 info.si_addr = NULL;
872 if (notify_die(DIE_TRAP, "iret exception",
873 regs, error_code, 32, SIGILL) == NOTIFY_STOP)
874 return;
875 do_trap(32, SIGILL, "iret exception", regs, error_code, &info);
876 }
877 #endif
878
879 void __init trap_init(void)
880 {
881 int i;
882
883 #ifdef CONFIG_EISA
884 void __iomem *p = early_ioremap(0x0FFFD9, 4);
885
886 if (readl(p) == 'E' + ('I'<<8) + ('S'<<16) + ('A'<<24))
887 EISA_bus = 1;
888 early_iounmap(p, 4);
889 #endif
890
891 set_intr_gate(0, &divide_error);
892 set_intr_gate_ist(1, &debug, DEBUG_STACK);
893 set_intr_gate_ist(2, &nmi, NMI_STACK);
894 /* int3 can be called from all */
895 set_system_intr_gate_ist(3, &int3, DEBUG_STACK);
896 /* int4 can be called from all */
897 set_system_intr_gate(4, &overflow);
898 set_intr_gate(5, &bounds);
899 set_intr_gate(6, &invalid_op);
900 set_intr_gate(7, &device_not_available);
901 #ifdef CONFIG_X86_32
902 set_task_gate(8, GDT_ENTRY_DOUBLEFAULT_TSS);
903 #else
904 set_intr_gate_ist(8, &double_fault, DOUBLEFAULT_STACK);
905 #endif
906 set_intr_gate(9, &coprocessor_segment_overrun);
907 set_intr_gate(10, &invalid_TSS);
908 set_intr_gate(11, &segment_not_present);
909 set_intr_gate_ist(12, &stack_segment, STACKFAULT_STACK);
910 set_intr_gate(13, &general_protection);
911 set_intr_gate(14, &page_fault);
912 set_intr_gate(15, &spurious_interrupt_bug);
913 set_intr_gate(16, &coprocessor_error);
914 set_intr_gate(17, &alignment_check);
915 #ifdef CONFIG_X86_MCE
916 set_intr_gate_ist(18, &machine_check, MCE_STACK);
917 #endif
918 set_intr_gate(19, &simd_coprocessor_error);
919
920 /* Reserve all the builtin and the syscall vector: */
921 for (i = 0; i < FIRST_EXTERNAL_VECTOR; i++)
922 set_bit(i, used_vectors);
923
924 #ifdef CONFIG_IA32_EMULATION
925 set_system_intr_gate(IA32_SYSCALL_VECTOR, ia32_syscall);
926 set_bit(IA32_SYSCALL_VECTOR, used_vectors);
927 #endif
928
929 #ifdef CONFIG_X86_32
930 if (cpu_has_fxsr) {
931 printk(KERN_INFO "Enabling fast FPU save and restore... ");
932 set_in_cr4(X86_CR4_OSFXSR);
933 printk("done.\n");
934 }
935 if (cpu_has_xmm) {
936 printk(KERN_INFO
937 "Enabling unmasked SIMD FPU exception support... ");
938 set_in_cr4(X86_CR4_OSXMMEXCPT);
939 printk("done.\n");
940 }
941
942 set_system_trap_gate(SYSCALL_VECTOR, &system_call);
943 set_bit(SYSCALL_VECTOR, used_vectors);
944 #endif
945
946 /*
947 * Should be a barrier for any external CPU state:
948 */
949 cpu_init();
950
951 x86_init.irqs.trap_init();
952 }