Merge tag 'mmc-v4.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

[mirror_ubuntu-bionic-kernel.git] / arch / x86 / lib / insn-eval.c

/*
 * Utility functions for x86 operand and address decoding
 *
 * Copyright (C) Intel Corporation 2017
 */
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/ratelimit.h>
#include <linux/mmu_context.h>
#include <asm/desc_defs.h>
#include <asm/desc.h>
#include <asm/inat.h>
#include <asm/insn.h>
#include <asm/insn-eval.h>
#include <asm/ldt.h>
#include <asm/vm86.h>

#undef pr_fmt
#define pr_fmt(fmt) "insn: " fmt

enum reg_type {
        REG_TYPE_RM = 0,
        REG_TYPE_INDEX,
        REG_TYPE_BASE,
};

/**
 * is_string_insn() - Determine if instruction is a string instruction
 * @insn:       Instruction containing the opcode to inspect
 *
 * Returns:
 *
 * true if the instruction, determined by the opcode, is any of the
 * string instructions as defined in the Intel Software Development manual.
 * False otherwise.
 */
static bool is_string_insn(struct insn *insn)
{
        insn_get_opcode(insn);

        /* All string instructions have a 1-byte opcode. */
        if (insn->opcode.nbytes != 1)
                return false;

        switch (insn->opcode.bytes[0]) {
        case 0x6c ... 0x6f:     /* INS, OUTS */
        case 0xa4 ... 0xa7:     /* MOVS, CMPS */
        case 0xaa ... 0xaf:     /* STOS, LODS, SCAS */
                return true;
        default:
                return false;
        }
}

/**
 * get_seg_reg_override_idx() - obtain segment register override index
 * @insn:       Valid instruction with segment override prefixes
 *
 * Inspect the instruction prefixes in @insn and find segment overrides, if any.
 *
 * Returns:
 *
 * A constant identifying the segment register to use, among CS, SS, DS,
 * ES, FS, or GS. INAT_SEG_REG_DEFAULT is returned if no segment override
 * prefixes were found.
 *
 * -EINVAL in case of error.
 */
static int get_seg_reg_override_idx(struct insn *insn)
{
        int idx = INAT_SEG_REG_DEFAULT;
        int num_overrides = 0, i;

        insn_get_prefixes(insn);

        /* Look for any segment override prefixes. */
        for (i = 0; i < insn->prefixes.nbytes; i++) {
                insn_attr_t attr;

                attr = inat_get_opcode_attribute(insn->prefixes.bytes[i]);
                switch (attr) {
                case INAT_MAKE_PREFIX(INAT_PFX_CS):
                        idx = INAT_SEG_REG_CS;
                        num_overrides++;
                        break;
                case INAT_MAKE_PREFIX(INAT_PFX_SS):
                        idx = INAT_SEG_REG_SS;
                        num_overrides++;
                        break;
                case INAT_MAKE_PREFIX(INAT_PFX_DS):
                        idx = INAT_SEG_REG_DS;
                        num_overrides++;
                        break;
                case INAT_MAKE_PREFIX(INAT_PFX_ES):
                        idx = INAT_SEG_REG_ES;
                        num_overrides++;
                        break;
                case INAT_MAKE_PREFIX(INAT_PFX_FS):
                        idx = INAT_SEG_REG_FS;
                        num_overrides++;
                        break;
                case INAT_MAKE_PREFIX(INAT_PFX_GS):
                        idx = INAT_SEG_REG_GS;
                        num_overrides++;
                        break;
                /* No default action needed. */
                }
        }

        /* More than one segment override prefix leads to undefined behavior. */
        if (num_overrides > 1)
                return -EINVAL;

        return idx;
}

/**
 * check_seg_overrides() - check if segment override prefixes are allowed
 * @insn:       Valid instruction with segment override prefixes
 * @regoff:     Operand offset, in pt_regs, for which the check is performed
 *
 * For a particular register used in register-indirect addressing, determine if
 * segment override prefixes can be used. Specifically, no overrides are allowed
 * for rDI if used with a string instruction.
 *
 * Returns:
 *
 * True if segment override prefixes can be used with the register indicated
 * in @regoff. False if otherwise.
 */
static bool check_seg_overrides(struct insn *insn, int regoff)
{
        if (regoff == offsetof(struct pt_regs, di) && is_string_insn(insn))
                return false;

        return true;
}

/**
 * resolve_default_seg() - resolve default segment register index for an operand
 * @insn:       Instruction with opcode and address size. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @off:        Operand offset, in pt_regs, for which resolution is needed
 *
 * Resolve the default segment register index associated with the instruction
 * operand register indicated by @off. Such index is resolved based on defaults
 * described in the Intel Software Development Manual.
 *
 * Returns:
 *
 * If in protected mode, a constant identifying the segment register to use,
 * among CS, SS, ES or DS. If in long mode, INAT_SEG_REG_IGNORE.
 *
 * -EINVAL in case of error.
 */
static int resolve_default_seg(struct insn *insn, struct pt_regs *regs, int off)
{
        if (user_64bit_mode(regs))
                return INAT_SEG_REG_IGNORE;
        /*
         * Resolve the default segment register as described in Section 3.7.4
         * of the Intel Software Development Manual Vol. 1:
         *
         *  + DS for all references involving r[ABCD]X, and rSI.
         *  + If used in a string instruction, ES for rDI. Otherwise, DS.
         *  + AX, CX and DX are not valid register operands in 16-bit address
         *    encodings but are valid for 32-bit and 64-bit encodings.
         *  + -EDOM is reserved to identify for cases in which no register
         *    is used (i.e., displacement-only addressing). Use DS.
         *  + SS for rSP or rBP.
         *  + CS for rIP.
         */

        switch (off) {
        case offsetof(struct pt_regs, ax):
        case offsetof(struct pt_regs, cx):
        case offsetof(struct pt_regs, dx):
                /* Need insn to verify address size. */
                if (insn->addr_bytes == 2)
                        return -EINVAL;

        case -EDOM:
        case offsetof(struct pt_regs, bx):
        case offsetof(struct pt_regs, si):
                return INAT_SEG_REG_DS;

        case offsetof(struct pt_regs, di):
                if (is_string_insn(insn))
                        return INAT_SEG_REG_ES;
                return INAT_SEG_REG_DS;

        case offsetof(struct pt_regs, bp):
        case offsetof(struct pt_regs, sp):
                return INAT_SEG_REG_SS;

        case offsetof(struct pt_regs, ip):
                return INAT_SEG_REG_CS;

        default:
                return -EINVAL;
        }
}

/**
 * resolve_seg_reg() - obtain segment register index
 * @insn:       Instruction with operands
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Operand offset, in pt_regs, used to deterimine segment register
 *
 * Determine the segment register associated with the operands and, if
 * applicable, prefixes and the instruction pointed by @insn.
 *
 * The segment register associated to an operand used in register-indirect
 * addressing depends on:
 *
 * a) Whether running in long mode (in such a case segments are ignored, except
 * if FS or GS are used).
 *
 * b) Whether segment override prefixes can be used. Certain instructions and
 *    registers do not allow override prefixes.
 *
 * c) Whether segment overrides prefixes are found in the instruction prefixes.
 *
 * d) If there are not segment override prefixes or they cannot be used, the
 *    default segment register associated with the operand register is used.
 *
 * The function checks first if segment override prefixes can be used with the
 * operand indicated by @regoff. If allowed, obtain such overridden segment
 * register index. Lastly, if not prefixes were found or cannot be used, resolve
 * the segment register index to use based on the defaults described in the
 * Intel documentation. In long mode, all segment register indexes will be
 * ignored, except if overrides were found for FS or GS. All these operations
 * are done using helper functions.
 *
 * The operand register, @regoff, is represented as the offset from the base of
 * pt_regs.
 *
 * As stated, the main use of this function is to determine the segment register
 * index based on the instruction, its operands and prefixes. Hence, @insn
 * must be valid. However, if @regoff indicates rIP, we don't need to inspect
 * @insn at all as in this case CS is used in all cases. This case is checked
 * before proceeding further.
 *
 * Please note that this function does not return the value in the segment
 * register (i.e., the segment selector) but our defined index. The segment
 * selector needs to be obtained using get_segment_selector() and passing the
 * segment register index resolved by this function.
 *
 * Returns:
 *
 * An index identifying the segment register to use, among CS, SS, DS,
 * ES, FS, or GS. INAT_SEG_REG_IGNORE is returned if running in long mode.
 *
 * -EINVAL in case of error.
 */
static int resolve_seg_reg(struct insn *insn, struct pt_regs *regs, int regoff)
{
        int idx;

        /*
         * In the unlikely event of having to resolve the segment register
         * index for rIP, do it first. Segment override prefixes should not
         * be used. Hence, it is not necessary to inspect the instruction,
         * which may be invalid at this point.
         */
        if (regoff == offsetof(struct pt_regs, ip)) {
                if (user_64bit_mode(regs))
                        return INAT_SEG_REG_IGNORE;
                else
                        return INAT_SEG_REG_CS;
        }

        if (!insn)
                return -EINVAL;

        if (!check_seg_overrides(insn, regoff))
                return resolve_default_seg(insn, regs, regoff);

        idx = get_seg_reg_override_idx(insn);
        if (idx < 0)
                return idx;

        if (idx == INAT_SEG_REG_DEFAULT)
                return resolve_default_seg(insn, regs, regoff);

        /*
         * In long mode, segment override prefixes are ignored, except for
         * overrides for FS and GS.
         */
        if (user_64bit_mode(regs)) {
                if (idx != INAT_SEG_REG_FS &&
                    idx != INAT_SEG_REG_GS)
                        idx = INAT_SEG_REG_IGNORE;
        }

        return idx;
}

/**
 * get_segment_selector() - obtain segment selector
 * @regs:               Register values as seen when entering kernel mode
 * @seg_reg_idx:        Segment register index to use
 *
 * Obtain the segment selector from any of the CS, SS, DS, ES, FS, GS segment
 * registers. In CONFIG_X86_32, the segment is obtained from either pt_regs or
 * kernel_vm86_regs as applicable. In CONFIG_X86_64, CS and SS are obtained
 * from pt_regs. DS, ES, FS and GS are obtained by reading the actual CPU
 * registers. This done for only for completeness as in CONFIG_X86_64 segment
 * registers are ignored.
 *
 * Returns:
 *
 * Value of the segment selector, including null when running in
 * long mode.
 *
 * -EINVAL on error.
 */
static short get_segment_selector(struct pt_regs *regs, int seg_reg_idx)
{
#ifdef CONFIG_X86_64
        unsigned short sel;

        switch (seg_reg_idx) {
        case INAT_SEG_REG_IGNORE:
                return 0;
        case INAT_SEG_REG_CS:
                return (unsigned short)(regs->cs & 0xffff);
        case INAT_SEG_REG_SS:
                return (unsigned short)(regs->ss & 0xffff);
        case INAT_SEG_REG_DS:
                savesegment(ds, sel);
                return sel;
        case INAT_SEG_REG_ES:
                savesegment(es, sel);
                return sel;
        case INAT_SEG_REG_FS:
                savesegment(fs, sel);
                return sel;
        case INAT_SEG_REG_GS:
                savesegment(gs, sel);
                return sel;
        default:
                return -EINVAL;
        }
#else /* CONFIG_X86_32 */
        struct kernel_vm86_regs *vm86regs = (struct kernel_vm86_regs *)regs;

        if (v8086_mode(regs)) {
                switch (seg_reg_idx) {
                case INAT_SEG_REG_CS:
                        return (unsigned short)(regs->cs & 0xffff);
                case INAT_SEG_REG_SS:
                        return (unsigned short)(regs->ss & 0xffff);
                case INAT_SEG_REG_DS:
                        return vm86regs->ds;
                case INAT_SEG_REG_ES:
                        return vm86regs->es;
                case INAT_SEG_REG_FS:
                        return vm86regs->fs;
                case INAT_SEG_REG_GS:
                        return vm86regs->gs;
                case INAT_SEG_REG_IGNORE:
                        /* fall through */
                default:
                        return -EINVAL;
                }
        }

        switch (seg_reg_idx) {
        case INAT_SEG_REG_CS:
                return (unsigned short)(regs->cs & 0xffff);
        case INAT_SEG_REG_SS:
                return (unsigned short)(regs->ss & 0xffff);
        case INAT_SEG_REG_DS:
                return (unsigned short)(regs->ds & 0xffff);
        case INAT_SEG_REG_ES:
                return (unsigned short)(regs->es & 0xffff);
        case INAT_SEG_REG_FS:
                return (unsigned short)(regs->fs & 0xffff);
        case INAT_SEG_REG_GS:
                /*
                 * GS may or may not be in regs as per CONFIG_X86_32_LAZY_GS.
                 * The macro below takes care of both cases.
                 */
                return get_user_gs(regs);
        case INAT_SEG_REG_IGNORE:
                /* fall through */
        default:
                return -EINVAL;
        }
#endif /* CONFIG_X86_64 */
}

static int get_reg_offset(struct insn *insn, struct pt_regs *regs,
                          enum reg_type type)
{
        int regno = 0;

        static const int regoff[] = {
                offsetof(struct pt_regs, ax),
                offsetof(struct pt_regs, cx),
                offsetof(struct pt_regs, dx),
                offsetof(struct pt_regs, bx),
                offsetof(struct pt_regs, sp),
                offsetof(struct pt_regs, bp),
                offsetof(struct pt_regs, si),
                offsetof(struct pt_regs, di),
#ifdef CONFIG_X86_64
                offsetof(struct pt_regs, r8),
                offsetof(struct pt_regs, r9),
                offsetof(struct pt_regs, r10),
                offsetof(struct pt_regs, r11),
                offsetof(struct pt_regs, r12),
                offsetof(struct pt_regs, r13),
                offsetof(struct pt_regs, r14),
                offsetof(struct pt_regs, r15),
#endif
        };
        int nr_registers = ARRAY_SIZE(regoff);
        /*
         * Don't possibly decode a 32-bit instructions as
         * reading a 64-bit-only register.
         */
        if (IS_ENABLED(CONFIG_X86_64) && !insn->x86_64)
                nr_registers -= 8;

        switch (type) {
        case REG_TYPE_RM:
                regno = X86_MODRM_RM(insn->modrm.value);

                /*
                 * ModRM.mod == 0 and ModRM.rm == 5 means a 32-bit displacement
                 * follows the ModRM byte.
                 */
                if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
                        return -EDOM;

                if (X86_REX_B(insn->rex_prefix.value))
                        regno += 8;
                break;

        case REG_TYPE_INDEX:
                regno = X86_SIB_INDEX(insn->sib.value);
                if (X86_REX_X(insn->rex_prefix.value))
                        regno += 8;

                /*
                 * If ModRM.mod != 3 and SIB.index = 4 the scale*index
                 * portion of the address computation is null. This is
                 * true only if REX.X is 0. In such a case, the SIB index
                 * is used in the address computation.
                 */
                if (X86_MODRM_MOD(insn->modrm.value) != 3 && regno == 4)
                        return -EDOM;
                break;

        case REG_TYPE_BASE:
                regno = X86_SIB_BASE(insn->sib.value);
                /*
                 * If ModRM.mod is 0 and SIB.base == 5, the base of the
                 * register-indirect addressing is 0. In this case, a
                 * 32-bit displacement follows the SIB byte.
                 */
                if (!X86_MODRM_MOD(insn->modrm.value) && regno == 5)
                        return -EDOM;

                if (X86_REX_B(insn->rex_prefix.value))
                        regno += 8;
                break;

        default:
                pr_err_ratelimited("invalid register type: %d\n", type);
                return -EINVAL;
        }

        if (regno >= nr_registers) {
                WARN_ONCE(1, "decoded an instruction with an invalid register");
                return -EINVAL;
        }
        return regoff[regno];
}

/**
 * get_reg_offset_16() - Obtain offset of register indicated by instruction
 * @insn:       Instruction containing ModRM byte
 * @regs:       Register values as seen when entering kernel mode
 * @offs1:      Offset of the first operand register
 * @offs2:      Offset of the second opeand register, if applicable
 *
 * Obtain the offset, in pt_regs, of the registers indicated by the ModRM byte
 * in @insn. This function is to be used with 16-bit address encodings. The
 * @offs1 and @offs2 will be written with the offset of the two registers
 * indicated by the instruction. In cases where any of the registers is not
 * referenced by the instruction, the value will be set to -EDOM.
 *
 * Returns:
 *
 * 0 on success, -EINVAL on error.
 */
static int get_reg_offset_16(struct insn *insn, struct pt_regs *regs,
                             int *offs1, int *offs2)
{
        /*
         * 16-bit addressing can use one or two registers. Specifics of
         * encodings are given in Table 2-1. "16-Bit Addressing Forms with the
         * ModR/M Byte" of the Intel Software Development Manual.
         */
        static const int regoff1[] = {
                offsetof(struct pt_regs, bx),
                offsetof(struct pt_regs, bx),
                offsetof(struct pt_regs, bp),
                offsetof(struct pt_regs, bp),
                offsetof(struct pt_regs, si),
                offsetof(struct pt_regs, di),
                offsetof(struct pt_regs, bp),
                offsetof(struct pt_regs, bx),
        };

        static const int regoff2[] = {
                offsetof(struct pt_regs, si),
                offsetof(struct pt_regs, di),
                offsetof(struct pt_regs, si),
                offsetof(struct pt_regs, di),
                -EDOM,
                -EDOM,
                -EDOM,
                -EDOM,
        };

        if (!offs1 || !offs2)
                return -EINVAL;

        /* Operand is a register, use the generic function. */
        if (X86_MODRM_MOD(insn->modrm.value) == 3) {
                *offs1 = insn_get_modrm_rm_off(insn, regs);
                *offs2 = -EDOM;
                return 0;
        }

        *offs1 = regoff1[X86_MODRM_RM(insn->modrm.value)];
        *offs2 = regoff2[X86_MODRM_RM(insn->modrm.value)];

        /*
         * If ModRM.mod is 0 and ModRM.rm is 110b, then we use displacement-
         * only addressing. This means that no registers are involved in
         * computing the effective address. Thus, ensure that the first
         * register offset is invalild. The second register offset is already
         * invalid under the aforementioned conditions.
         */
        if ((X86_MODRM_MOD(insn->modrm.value) == 0) &&
            (X86_MODRM_RM(insn->modrm.value) == 6))
                *offs1 = -EDOM;

        return 0;
}

/**
 * get_desc() - Obtain pointer to a segment descriptor
 * @sel:        Segment selector
 *
 * Given a segment selector, obtain a pointer to the segment descriptor.
 * Both global and local descriptor tables are supported.
 *
 * Returns:
 *
 * Pointer to segment descriptor on success.
 *
 * NULL on error.
 */
static struct desc_struct *get_desc(unsigned short sel)
{
        struct desc_ptr gdt_desc = {0, 0};
        unsigned long desc_base;

#ifdef CONFIG_MODIFY_LDT_SYSCALL
        if ((sel & SEGMENT_TI_MASK) == SEGMENT_LDT) {
                struct desc_struct *desc = NULL;
                struct ldt_struct *ldt;

                /* Bits [15:3] contain the index of the desired entry. */
                sel >>= 3;

                mutex_lock(&current->active_mm->context.lock);
                ldt = current->active_mm->context.ldt;
                if (ldt && sel < ldt->nr_entries)
                        desc = &ldt->entries[sel];

                mutex_unlock(&current->active_mm->context.lock);

                return desc;
        }
#endif
        native_store_gdt(&gdt_desc);

        /*
         * Segment descriptors have a size of 8 bytes. Thus, the index is
         * multiplied by 8 to obtain the memory offset of the desired descriptor
         * from the base of the GDT. As bits [15:3] of the segment selector
         * contain the index, it can be regarded as multiplied by 8 already.
         * All that remains is to clear bits [2:0].
         */
        desc_base = sel & ~(SEGMENT_RPL_MASK | SEGMENT_TI_MASK);

        if (desc_base > gdt_desc.size)
                return NULL;

        return (struct desc_struct *)(gdt_desc.address + desc_base);
}

/**
 * insn_get_seg_base() - Obtain base address of segment descriptor.
 * @regs:               Register values as seen when entering kernel mode
 * @seg_reg_idx:        Index of the segment register pointing to seg descriptor
 *
 * Obtain the base address of the segment as indicated by the segment descriptor
 * pointed by the segment selector. The segment selector is obtained from the
 * input segment register index @seg_reg_idx.
 *
 * Returns:
 *
 * In protected mode, base address of the segment. Zero in long mode,
 * except when FS or GS are used. In virtual-8086 mode, the segment
 * selector shifted 4 bits to the right.
 *
 * -1L in case of error.
 */
unsigned long insn_get_seg_base(struct pt_regs *regs, int seg_reg_idx)
{
        struct desc_struct *desc;
        short sel;

        sel = get_segment_selector(regs, seg_reg_idx);
        if (sel < 0)
                return -1L;

        if (v8086_mode(regs))
                /*
                 * Base is simply the segment selector shifted 4
                 * bits to the right.
                 */
                return (unsigned long)(sel << 4);

        if (user_64bit_mode(regs)) {
                /*
                 * Only FS or GS will have a base address, the rest of
                 * the segments' bases are forced to 0.
                 */
                unsigned long base;

                if (seg_reg_idx == INAT_SEG_REG_FS)
                        rdmsrl(MSR_FS_BASE, base);
                else if (seg_reg_idx == INAT_SEG_REG_GS)
                        /*
                         * swapgs was called at the kernel entry point. Thus,
                         * MSR_KERNEL_GS_BASE will have the user-space GS base.
                         */
                        rdmsrl(MSR_KERNEL_GS_BASE, base);
                else
                        base = 0;
                return base;
        }

        /* In protected mode the segment selector cannot be null. */
        if (!sel)
                return -1L;

        desc = get_desc(sel);
        if (!desc)
                return -1L;

        return get_desc_base(desc);
}

/**
 * get_seg_limit() - Obtain the limit of a segment descriptor
 * @regs:               Register values as seen when entering kernel mode
 * @seg_reg_idx:        Index of the segment register pointing to seg descriptor
 *
 * Obtain the limit of the segment as indicated by the segment descriptor
 * pointed by the segment selector. The segment selector is obtained from the
 * input segment register index @seg_reg_idx.
 *
 * Returns:
 *
 * In protected mode, the limit of the segment descriptor in bytes.
 * In long mode and virtual-8086 mode, segment limits are not enforced. Thus,
 * limit is returned as -1L to imply a limit-less segment.
 *
 * Zero is returned on error.
 */
static unsigned long get_seg_limit(struct pt_regs *regs, int seg_reg_idx)
{
        struct desc_struct *desc;
        unsigned long limit;
        short sel;

        sel = get_segment_selector(regs, seg_reg_idx);
        if (sel < 0)
                return 0;

        if (user_64bit_mode(regs) || v8086_mode(regs))
                return -1L;

        if (!sel)
                return 0;

        desc = get_desc(sel);
        if (!desc)
                return 0;

        /*
         * If the granularity bit is set, the limit is given in multiples
         * of 4096. This also means that the 12 least significant bits are
         * not tested when checking the segment limits. In practice,
         * this means that the segment ends in (limit << 12) + 0xfff.
         */
        limit = get_desc_limit(desc);
        if (desc->g)
                limit = (limit << 12) + 0xfff;

        return limit;
}

/**
 * insn_get_code_seg_params() - Obtain code segment parameters
 * @regs:       Structure with register values as seen when entering kernel mode
 *
 * Obtain address and operand sizes of the code segment. It is obtained from the
 * selector contained in the CS register in regs. In protected mode, the default
 * address is determined by inspecting the L and D bits of the segment
 * descriptor. In virtual-8086 mode, the default is always two bytes for both
 * address and operand sizes.
 *
 * Returns:
 *
 * An int containing ORed-in default parameters on success.
 *
 * -EINVAL on error.
 */
int insn_get_code_seg_params(struct pt_regs *regs)
{
        struct desc_struct *desc;
        short sel;

        if (v8086_mode(regs))
                /* Address and operand size are both 16-bit. */
                return INSN_CODE_SEG_PARAMS(2, 2);

        sel = get_segment_selector(regs, INAT_SEG_REG_CS);
        if (sel < 0)
                return sel;

        desc = get_desc(sel);
        if (!desc)
                return -EINVAL;

        /*
         * The most significant byte of the Type field of the segment descriptor
         * determines whether a segment contains data or code. If this is a data
         * segment, return error.
         */
        if (!(desc->type & BIT(3)))
                return -EINVAL;

        switch ((desc->l << 1) | desc->d) {
        case 0: /*
                 * Legacy mode. CS.L=0, CS.D=0. Address and operand size are
                 * both 16-bit.
                 */
                return INSN_CODE_SEG_PARAMS(2, 2);
        case 1: /*
                 * Legacy mode. CS.L=0, CS.D=1. Address and operand size are
                 * both 32-bit.
                 */
                return INSN_CODE_SEG_PARAMS(4, 4);
        case 2: /*
                 * IA-32e 64-bit mode. CS.L=1, CS.D=0. Address size is 64-bit;
                 * operand size is 32-bit.
                 */
                return INSN_CODE_SEG_PARAMS(4, 8);
        case 3: /* Invalid setting. CS.L=1, CS.D=1 */
                /* fall through */
        default:
                return -EINVAL;
        }
}

/**
 * insn_get_modrm_rm_off() - Obtain register in r/m part of the ModRM byte
 * @insn:       Instruction containing the ModRM byte
 * @regs:       Register values as seen when entering kernel mode
 *
 * Returns:
 *
 * The register indicated by the r/m part of the ModRM byte. The
 * register is obtained as an offset from the base of pt_regs. In specific
 * cases, the returned value can be -EDOM to indicate that the particular value
 * of ModRM does not refer to a register and shall be ignored.
 */
int insn_get_modrm_rm_off(struct insn *insn, struct pt_regs *regs)
{
        return get_reg_offset(insn, regs, REG_TYPE_RM);
}

/**
 * get_seg_base_limit() - obtain base address and limit of a segment
 * @insn:       Instruction. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Operand offset, in pt_regs, used to resolve segment descriptor
 * @base:       Obtained segment base
 * @limit:      Obtained segment limit
 *
 * Obtain the base address and limit of the segment associated with the operand
 * @regoff and, if any or allowed, override prefixes in @insn. This function is
 * different from insn_get_seg_base() as the latter does not resolve the segment
 * associated with the instruction operand. If a limit is not needed (e.g.,
 * when running in long mode), @limit can be NULL.
 *
 * Returns:
 *
 * 0 on success. @base and @limit will contain the base address and of the
 * resolved segment, respectively.
 *
 * -EINVAL on error.
 */
static int get_seg_base_limit(struct insn *insn, struct pt_regs *regs,
                              int regoff, unsigned long *base,
                              unsigned long *limit)
{
        int seg_reg_idx;

        if (!base)
                return -EINVAL;

        seg_reg_idx = resolve_seg_reg(insn, regs, regoff);
        if (seg_reg_idx < 0)
                return seg_reg_idx;

        *base = insn_get_seg_base(regs, seg_reg_idx);
        if (*base == -1L)
                return -EINVAL;

        if (!limit)
                return 0;

        *limit = get_seg_limit(regs, seg_reg_idx);
        if (!(*limit))
                return -EINVAL;

        return 0;
}

/**
 * get_eff_addr_reg() - Obtain effective address from register operand
 * @insn:       Instruction. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Obtained operand offset, in pt_regs, with the effective address
 * @eff_addr:   Obtained effective address
 *
 * Obtain the effective address stored in the register operand as indicated by
 * the ModRM byte. This function is to be used only with register addressing
 * (i.e.,  ModRM.mod is 3). The effective address is saved in @eff_addr. The
 * register operand, as an offset from the base of pt_regs, is saved in @regoff;
 * such offset can then be used to resolve the segment associated with the
 * operand. This function can be used with any of the supported address sizes
 * in x86.
 *
 * Returns:
 *
 * 0 on success. @eff_addr will have the effective address stored in the
 * operand indicated by ModRM. @regoff will have such operand as an offset from
 * the base of pt_regs.
 *
 * -EINVAL on error.
 */
static int get_eff_addr_reg(struct insn *insn, struct pt_regs *regs,
                            int *regoff, long *eff_addr)
{
        insn_get_modrm(insn);

        if (!insn->modrm.nbytes)
                return -EINVAL;

        if (X86_MODRM_MOD(insn->modrm.value) != 3)
                return -EINVAL;

        *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);
        if (*regoff < 0)
                return -EINVAL;

        /* Ignore bytes that are outside the address size. */
        if (insn->addr_bytes == 2)
                *eff_addr = regs_get_register(regs, *regoff) & 0xffff;
        else if (insn->addr_bytes == 4)
                *eff_addr = regs_get_register(regs, *regoff) & 0xffffffff;
        else /* 64-bit address */
                *eff_addr = regs_get_register(regs, *regoff);

        return 0;
}

/**
 * get_eff_addr_modrm() - Obtain referenced effective address via ModRM
 * @insn:       Instruction. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Obtained operand offset, in pt_regs, associated with segment
 * @eff_addr:   Obtained effective address
 *
 * Obtain the effective address referenced by the ModRM byte of @insn. After
 * identifying the registers involved in the register-indirect memory reference,
 * its value is obtained from the operands in @regs. The computed address is
 * stored @eff_addr. Also, the register operand that indicates the associated
 * segment is stored in @regoff, this parameter can later be used to determine
 * such segment.
 *
 * Returns:
 *
 * 0 on success. @eff_addr will have the referenced effective address. @regoff
 * will have a register, as an offset from the base of pt_regs, that can be used
 * to resolve the associated segment.
 *
 * -EINVAL on error.
 */
static int get_eff_addr_modrm(struct insn *insn, struct pt_regs *regs,
                              int *regoff, long *eff_addr)
{
        long tmp;

        if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
                return -EINVAL;

        insn_get_modrm(insn);

        if (!insn->modrm.nbytes)
                return -EINVAL;

        if (X86_MODRM_MOD(insn->modrm.value) > 2)
                return -EINVAL;

        *regoff = get_reg_offset(insn, regs, REG_TYPE_RM);

        /*
         * -EDOM means that we must ignore the address_offset. In such a case,
         * in 64-bit mode the effective address relative to the rIP of the
         * following instruction.
         */
        if (*regoff == -EDOM) {
                if (user_64bit_mode(regs))
                        tmp = regs->ip + insn->length;
                else
                        tmp = 0;
        } else if (*regoff < 0) {
                return -EINVAL;
        } else {
                tmp = regs_get_register(regs, *regoff);
        }

        if (insn->addr_bytes == 4) {
                int addr32 = (int)(tmp & 0xffffffff) + insn->displacement.value;

                *eff_addr = addr32 & 0xffffffff;
        } else {
                *eff_addr = tmp + insn->displacement.value;
        }

        return 0;
}

/**
 * get_eff_addr_modrm_16() - Obtain referenced effective address via ModRM
 * @insn:       Instruction. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Obtained operand offset, in pt_regs, associated with segment
 * @eff_addr:   Obtained effective address
 *
 * Obtain the 16-bit effective address referenced by the ModRM byte of @insn.
 * After identifying the registers involved in the register-indirect memory
 * reference, its value is obtained from the operands in @regs. The computed
 * address is stored @eff_addr. Also, the register operand that indicates
 * the associated segment is stored in @regoff, this parameter can later be used
 * to determine such segment.
 *
 * Returns:
 *
 * 0 on success. @eff_addr will have the referenced effective address. @regoff
 * will have a register, as an offset from the base of pt_regs, that can be used
 * to resolve the associated segment.
 *
 * -EINVAL on error.
 */
static int get_eff_addr_modrm_16(struct insn *insn, struct pt_regs *regs,
                                 int *regoff, short *eff_addr)
{
        int addr_offset1, addr_offset2, ret;
        short addr1 = 0, addr2 = 0, displacement;

        if (insn->addr_bytes != 2)
                return -EINVAL;

        insn_get_modrm(insn);

        if (!insn->modrm.nbytes)
                return -EINVAL;

        if (X86_MODRM_MOD(insn->modrm.value) > 2)
                return -EINVAL;

        ret = get_reg_offset_16(insn, regs, &addr_offset1, &addr_offset2);
        if (ret < 0)
                return -EINVAL;

        /*
         * Don't fail on invalid offset values. They might be invalid because
         * they cannot be used for this particular value of ModRM. Instead, use
         * them in the computation only if they contain a valid value.
         */
        if (addr_offset1 != -EDOM)
                addr1 = regs_get_register(regs, addr_offset1) & 0xffff;

        if (addr_offset2 != -EDOM)
                addr2 = regs_get_register(regs, addr_offset2) & 0xffff;

        displacement = insn->displacement.value & 0xffff;
        *eff_addr = addr1 + addr2 + displacement;

        /*
         * The first operand register could indicate to use of either SS or DS
         * registers to obtain the segment selector.  The second operand
         * register can only indicate the use of DS. Thus, the first operand
         * will be used to obtain the segment selector.
         */
        *regoff = addr_offset1;

        return 0;
}

/**
 * get_eff_addr_sib() - Obtain referenced effective address via SIB
 * @insn:       Instruction. Must be valid.
 * @regs:       Register values as seen when entering kernel mode
 * @regoff:     Obtained operand offset, in pt_regs, associated with segment
 * @eff_addr:   Obtained effective address
 *
 * Obtain the effective address referenced by the SIB byte of @insn. After
 * identifying the registers involved in the indexed, register-indirect memory
 * reference, its value is obtained from the operands in @regs. The computed
 * address is stored @eff_addr. Also, the register operand that indicates the
 * associated segment is stored in @regoff, this parameter can later be used to
 * determine such segment.
 *
 * Returns:
 *
 * 0 on success. @eff_addr will have the referenced effective address.
 * @base_offset will have a register, as an offset from the base of pt_regs,
 * that can be used to resolve the associated segment.
 *
 * -EINVAL on error.
 */
static int get_eff_addr_sib(struct insn *insn, struct pt_regs *regs,
                            int *base_offset, long *eff_addr)
{
        long base, indx;
        int indx_offset;

        if (insn->addr_bytes != 8 && insn->addr_bytes != 4)
                return -EINVAL;

        insn_get_modrm(insn);

        if (!insn->modrm.nbytes)
                return -EINVAL;

        if (X86_MODRM_MOD(insn->modrm.value) > 2)
                return -EINVAL;

        insn_get_sib(insn);

        if (!insn->sib.nbytes)
                return -EINVAL;

        *base_offset = get_reg_offset(insn, regs, REG_TYPE_BASE);
        indx_offset = get_reg_offset(insn, regs, REG_TYPE_INDEX);

        /*
         * Negative values in the base and index offset means an error when
         * decoding the SIB byte. Except -EDOM, which means that the registers
         * should not be used in the address computation.
         */
        if (*base_offset == -EDOM)
                base = 0;
        else if (*base_offset < 0)
                return -EINVAL;
        else
                base = regs_get_register(regs, *base_offset);

        if (indx_offset == -EDOM)
                indx = 0;
        else if (indx_offset < 0)
                return -EINVAL;
        else
                indx = regs_get_register(regs, indx_offset);

        if (insn->addr_bytes == 4) {
                int addr32, base32, idx32;

                base32 = base & 0xffffffff;
                idx32 = indx & 0xffffffff;

                addr32 = base32 + idx32 * (1 << X86_SIB_SCALE(insn->sib.value));
                addr32 += insn->displacement.value;

                *eff_addr = addr32 & 0xffffffff;
        } else {
                *eff_addr = base + indx * (1 << X86_SIB_SCALE(insn->sib.value));
                *eff_addr += insn->displacement.value;
        }

        return 0;
}

/**
 * get_addr_ref_16() - Obtain the 16-bit address referred by instruction
 * @insn:       Instruction containing ModRM byte and displacement
 * @regs:       Register values as seen when entering kernel mode
 *
 * This function is to be used with 16-bit address encodings. Obtain the memory
 * address referred by the instruction's ModRM and displacement bytes. Also, the
 * segment used as base is determined by either any segment override prefixes in
 * @insn or the default segment of the registers involved in the address
 * computation. In protected mode, segment limits are enforced.
 *
 * Returns:
 *
 * Linear address referenced by the instruction operands on success.
 *
 * -1L on error.
 */
static void __user *get_addr_ref_16(struct insn *insn, struct pt_regs *regs)
{
        unsigned long linear_addr = -1L, seg_base, seg_limit;
        int ret, regoff;
        short eff_addr;
        long tmp;

        insn_get_modrm(insn);
        insn_get_displacement(insn);

        if (insn->addr_bytes != 2)
                goto out;

        if (X86_MODRM_MOD(insn->modrm.value) == 3) {
                ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
                if (ret)
                        goto out;

                eff_addr = tmp;
        } else {
                ret = get_eff_addr_modrm_16(insn, regs, &regoff, &eff_addr);
                if (ret)
                        goto out;
        }

        ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
        if (ret)
                goto out;

        /*
         * Before computing the linear address, make sure the effective address
         * is within the limits of the segment. In virtual-8086 mode, segment
         * limits are not enforced. In such a case, the segment limit is -1L to
         * reflect this fact.
         */
        if ((unsigned long)(eff_addr & 0xffff) > seg_limit)
                goto out;

        linear_addr = (unsigned long)(eff_addr & 0xffff) + seg_base;

        /* Limit linear address to 20 bits */
        if (v8086_mode(regs))
                linear_addr &= 0xfffff;

out:
        return (void __user *)linear_addr;
}

/**
 * get_addr_ref_32() - Obtain a 32-bit linear address
 * @insn:       Instruction with ModRM, SIB bytes and displacement
 * @regs:       Register values as seen when entering kernel mode
 *
 * This function is to be used with 32-bit address encodings to obtain the
 * linear memory address referred by the instruction's ModRM, SIB,
 * displacement bytes and segment base address, as applicable. If in protected
 * mode, segment limits are enforced.
 *
 * Returns:
 *
 * Linear address referenced by instruction and registers on success.
 *
 * -1L on error.
 */
static void __user *get_addr_ref_32(struct insn *insn, struct pt_regs *regs)
{
        unsigned long linear_addr = -1L, seg_base, seg_limit;
        int eff_addr, regoff;
        long tmp;
        int ret;

        if (insn->addr_bytes != 4)
                goto out;

        if (X86_MODRM_MOD(insn->modrm.value) == 3) {
                ret = get_eff_addr_reg(insn, regs, &regoff, &tmp);
                if (ret)
                        goto out;

                eff_addr = tmp;

        } else {
                if (insn->sib.nbytes) {
                        ret = get_eff_addr_sib(insn, regs, &regoff, &tmp);
                        if (ret)
                                goto out;

                        eff_addr = tmp;
                } else {
                        ret = get_eff_addr_modrm(insn, regs, &regoff, &tmp);
                        if (ret)
                                goto out;

                        eff_addr = tmp;
                }
        }

        ret = get_seg_base_limit(insn, regs, regoff, &seg_base, &seg_limit);
        if (ret)
                goto out;

        /*
         * In protected mode, before computing the linear address, make sure
         * the effective address is within the limits of the segment.
         * 32-bit addresses can be used in long and virtual-8086 modes if an
         * address override prefix is used. In such cases, segment limits are
         * not enforced. When in virtual-8086 mode, the segment limit is -1L
         * to reflect this situation.
         *
         * After computed, the effective address is treated as an unsigned
         * quantity.
         */
        if (!user_64bit_mode(regs) && ((unsigned int)eff_addr > seg_limit))
                goto out;

        /*
         * Even though 32-bit address encodings are allowed in virtual-8086
         * mode, the address range is still limited to [0x-0xffff].
         */
        if (v8086_mode(regs) && (eff_addr & ~0xffff))
                goto out;

        /*
         * Data type long could be 64 bits in size. Ensure that our 32-bit
         * effective address is not sign-extended when computing the linear
         * address.
         */
        linear_addr = (unsigned long)(eff_addr & 0xffffffff) + seg_base;

        /* Limit linear address to 20 bits */
        if (v8086_mode(regs))
                linear_addr &= 0xfffff;

out:
        return (void __user *)linear_addr;
}

/**
 * get_addr_ref_64() - Obtain a 64-bit linear address
 * @insn:       Instruction struct with ModRM and SIB bytes and displacement
 * @regs:       Structure with register values as seen when entering kernel mode
 *
 * This function is to be used with 64-bit address encodings to obtain the
 * linear memory address referred by the instruction's ModRM, SIB,
 * displacement bytes and segment base address, as applicable.
 *
 * Returns:
 *
 * Linear address referenced by instruction and registers on success.
 *
 * -1L on error.
 */
#ifndef CONFIG_X86_64
static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
{
        return (void __user *)-1L;
}
#else
static void __user *get_addr_ref_64(struct insn *insn, struct pt_regs *regs)
{
        unsigned long linear_addr = -1L, seg_base;
        int regoff, ret;
        long eff_addr;

        if (insn->addr_bytes != 8)
                goto out;

        if (X86_MODRM_MOD(insn->modrm.value) == 3) {
                ret = get_eff_addr_reg(insn, regs, &regoff, &eff_addr);
                if (ret)
                        goto out;

        } else {
                if (insn->sib.nbytes) {
                        ret = get_eff_addr_sib(insn, regs, &regoff, &eff_addr);
                        if (ret)
                                goto out;
                } else {
                        ret = get_eff_addr_modrm(insn, regs, &regoff, &eff_addr);
                        if (ret)
                                goto out;
                }

        }

        ret = get_seg_base_limit(insn, regs, regoff, &seg_base, NULL);
        if (ret)
                goto out;

        linear_addr = (unsigned long)eff_addr + seg_base;

out:
        return (void __user *)linear_addr;
}
#endif /* CONFIG_X86_64 */

/**
 * insn_get_addr_ref() - Obtain the linear address referred by instruction
 * @insn:       Instruction structure containing ModRM byte and displacement
 * @regs:       Structure with register values as seen when entering kernel mode
 *
 * Obtain the linear address referred by the instruction's ModRM, SIB and
 * displacement bytes, and segment base, as applicable. In protected mode,
 * segment limits are enforced.
 *
 * Returns:
 *
 * Linear address referenced by instruction and registers on success.
 *
 * -1L on error.
 */
void __user *insn_get_addr_ref(struct insn *insn, struct pt_regs *regs)
{
        if (!insn || !regs)
                return (void __user *)-1L;

        switch (insn->addr_bytes) {
        case 2:
                return get_addr_ref_16(insn, regs);
        case 4:
                return get_addr_ref_32(insn, regs);
        case 8:
                return get_addr_ref_64(insn, regs);
        default:
                return (void __user *)-1L;
        }
}