]> git.proxmox.com Git - mirror_qemu.git/blob - block.c
tcg: Require TCG_TARGET_INSN_UNIT_SIZE
[mirror_qemu.git] / block.c
1 /*
2 * QEMU System Emulator block driver
3 *
4 * Copyright (c) 2003 Fabrice Bellard
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "block/qapi.h"
36 #include "qmp-commands.h"
37 #include "qemu/timer.h"
38
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
93
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
99
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
109 }
110
111 int is_windows_drive(const char *filename)
112 {
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
120 }
121 #endif
122
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
126 {
127 int i;
128
129 throttle_config(&bs->throttle_state, cfg);
130
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
133 }
134 }
135
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
142
143 bs->io_limits_enabled = false;
144
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
148 }
149 }
150
151 bs->io_limits_enabled = enabled;
152
153 return drained;
154 }
155
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158 bs->io_limits_enabled = false;
159
160 bdrv_start_throttled_reqs(bs);
161
162 throttle_destroy(&bs->throttle_state);
163 }
164
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 QEMU_CLOCK_VIRTUAL,
183 bdrv_throttle_read_timer_cb,
184 bdrv_throttle_write_timer_cb,
185 bs);
186 bs->io_limits_enabled = true;
187 }
188
189 /* This function makes an IO wait if needed
190 *
191 * @nb_sectors: the number of sectors of the IO
192 * @is_write: is the IO a write
193 */
194 static void bdrv_io_limits_intercept(BlockDriverState *bs,
195 unsigned int bytes,
196 bool is_write)
197 {
198 /* does this io must wait */
199 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
200
201 /* if must wait or any request of this type throttled queue the IO */
202 if (must_wait ||
203 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
204 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
205 }
206
207 /* the IO will be executed, do the accounting */
208 throttle_account(&bs->throttle_state, is_write, bytes);
209
210
211 /* if the next request must wait -> do nothing */
212 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
213 return;
214 }
215
216 /* else queue next request for execution */
217 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
218 }
219
220 size_t bdrv_opt_mem_align(BlockDriverState *bs)
221 {
222 if (!bs || !bs->drv) {
223 /* 4k should be on the safe side */
224 return 4096;
225 }
226
227 return bs->bl.opt_mem_alignment;
228 }
229
230 /* check if the path starts with "<protocol>:" */
231 static int path_has_protocol(const char *path)
232 {
233 const char *p;
234
235 #ifdef _WIN32
236 if (is_windows_drive(path) ||
237 is_windows_drive_prefix(path)) {
238 return 0;
239 }
240 p = path + strcspn(path, ":/\\");
241 #else
242 p = path + strcspn(path, ":/");
243 #endif
244
245 return *p == ':';
246 }
247
248 int path_is_absolute(const char *path)
249 {
250 #ifdef _WIN32
251 /* specific case for names like: "\\.\d:" */
252 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
253 return 1;
254 }
255 return (*path == '/' || *path == '\\');
256 #else
257 return (*path == '/');
258 #endif
259 }
260
261 /* if filename is absolute, just copy it to dest. Otherwise, build a
262 path to it by considering it is relative to base_path. URL are
263 supported. */
264 void path_combine(char *dest, int dest_size,
265 const char *base_path,
266 const char *filename)
267 {
268 const char *p, *p1;
269 int len;
270
271 if (dest_size <= 0)
272 return;
273 if (path_is_absolute(filename)) {
274 pstrcpy(dest, dest_size, filename);
275 } else {
276 p = strchr(base_path, ':');
277 if (p)
278 p++;
279 else
280 p = base_path;
281 p1 = strrchr(base_path, '/');
282 #ifdef _WIN32
283 {
284 const char *p2;
285 p2 = strrchr(base_path, '\\');
286 if (!p1 || p2 > p1)
287 p1 = p2;
288 }
289 #endif
290 if (p1)
291 p1++;
292 else
293 p1 = base_path;
294 if (p1 > p)
295 p = p1;
296 len = p - base_path;
297 if (len > dest_size - 1)
298 len = dest_size - 1;
299 memcpy(dest, base_path, len);
300 dest[len] = '\0';
301 pstrcat(dest, dest_size, filename);
302 }
303 }
304
305 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
306 {
307 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
308 pstrcpy(dest, sz, bs->backing_file);
309 } else {
310 path_combine(dest, sz, bs->filename, bs->backing_file);
311 }
312 }
313
314 void bdrv_register(BlockDriver *bdrv)
315 {
316 /* Block drivers without coroutine functions need emulation */
317 if (!bdrv->bdrv_co_readv) {
318 bdrv->bdrv_co_readv = bdrv_co_readv_em;
319 bdrv->bdrv_co_writev = bdrv_co_writev_em;
320
321 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
322 * the block driver lacks aio we need to emulate that too.
323 */
324 if (!bdrv->bdrv_aio_readv) {
325 /* add AIO emulation layer */
326 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
327 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
328 }
329 }
330
331 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
332 }
333
334 /* create a new block device (by default it is empty) */
335 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
336 {
337 BlockDriverState *bs;
338
339 if (bdrv_find(device_name)) {
340 error_setg(errp, "Device with id '%s' already exists",
341 device_name);
342 return NULL;
343 }
344 if (bdrv_find_node(device_name)) {
345 error_setg(errp, "Device with node-name '%s' already exists",
346 device_name);
347 return NULL;
348 }
349
350 bs = g_malloc0(sizeof(BlockDriverState));
351 QLIST_INIT(&bs->dirty_bitmaps);
352 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
353 if (device_name[0] != '\0') {
354 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
355 }
356 bdrv_iostatus_disable(bs);
357 notifier_list_init(&bs->close_notifiers);
358 notifier_with_return_list_init(&bs->before_write_notifiers);
359 qemu_co_queue_init(&bs->throttled_reqs[0]);
360 qemu_co_queue_init(&bs->throttled_reqs[1]);
361 bs->refcnt = 1;
362
363 return bs;
364 }
365
366 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
367 {
368 notifier_list_add(&bs->close_notifiers, notify);
369 }
370
371 BlockDriver *bdrv_find_format(const char *format_name)
372 {
373 BlockDriver *drv1;
374 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
375 if (!strcmp(drv1->format_name, format_name)) {
376 return drv1;
377 }
378 }
379 return NULL;
380 }
381
382 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
383 {
384 static const char *whitelist_rw[] = {
385 CONFIG_BDRV_RW_WHITELIST
386 };
387 static const char *whitelist_ro[] = {
388 CONFIG_BDRV_RO_WHITELIST
389 };
390 const char **p;
391
392 if (!whitelist_rw[0] && !whitelist_ro[0]) {
393 return 1; /* no whitelist, anything goes */
394 }
395
396 for (p = whitelist_rw; *p; p++) {
397 if (!strcmp(drv->format_name, *p)) {
398 return 1;
399 }
400 }
401 if (read_only) {
402 for (p = whitelist_ro; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
405 }
406 }
407 }
408 return 0;
409 }
410
411 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
412 bool read_only)
413 {
414 BlockDriver *drv = bdrv_find_format(format_name);
415 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
416 }
417
418 typedef struct CreateCo {
419 BlockDriver *drv;
420 char *filename;
421 QEMUOptionParameter *options;
422 int ret;
423 Error *err;
424 } CreateCo;
425
426 static void coroutine_fn bdrv_create_co_entry(void *opaque)
427 {
428 Error *local_err = NULL;
429 int ret;
430
431 CreateCo *cco = opaque;
432 assert(cco->drv);
433
434 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
435 if (local_err) {
436 error_propagate(&cco->err, local_err);
437 }
438 cco->ret = ret;
439 }
440
441 int bdrv_create(BlockDriver *drv, const char* filename,
442 QEMUOptionParameter *options, Error **errp)
443 {
444 int ret;
445
446 Coroutine *co;
447 CreateCo cco = {
448 .drv = drv,
449 .filename = g_strdup(filename),
450 .options = options,
451 .ret = NOT_DONE,
452 .err = NULL,
453 };
454
455 if (!drv->bdrv_create) {
456 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
457 ret = -ENOTSUP;
458 goto out;
459 }
460
461 if (qemu_in_coroutine()) {
462 /* Fast-path if already in coroutine context */
463 bdrv_create_co_entry(&cco);
464 } else {
465 co = qemu_coroutine_create(bdrv_create_co_entry);
466 qemu_coroutine_enter(co, &cco);
467 while (cco.ret == NOT_DONE) {
468 qemu_aio_wait();
469 }
470 }
471
472 ret = cco.ret;
473 if (ret < 0) {
474 if (cco.err) {
475 error_propagate(errp, cco.err);
476 } else {
477 error_setg_errno(errp, -ret, "Could not create image");
478 }
479 }
480
481 out:
482 g_free(cco.filename);
483 return ret;
484 }
485
486 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
487 Error **errp)
488 {
489 BlockDriver *drv;
490 Error *local_err = NULL;
491 int ret;
492
493 drv = bdrv_find_protocol(filename, true);
494 if (drv == NULL) {
495 error_setg(errp, "Could not find protocol for file '%s'", filename);
496 return -ENOENT;
497 }
498
499 ret = bdrv_create(drv, filename, options, &local_err);
500 if (local_err) {
501 error_propagate(errp, local_err);
502 }
503 return ret;
504 }
505
506 int bdrv_refresh_limits(BlockDriverState *bs)
507 {
508 BlockDriver *drv = bs->drv;
509
510 memset(&bs->bl, 0, sizeof(bs->bl));
511
512 if (!drv) {
513 return 0;
514 }
515
516 /* Take some limits from the children as a default */
517 if (bs->file) {
518 bdrv_refresh_limits(bs->file);
519 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
520 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
521 } else {
522 bs->bl.opt_mem_alignment = 512;
523 }
524
525 if (bs->backing_hd) {
526 bdrv_refresh_limits(bs->backing_hd);
527 bs->bl.opt_transfer_length =
528 MAX(bs->bl.opt_transfer_length,
529 bs->backing_hd->bl.opt_transfer_length);
530 bs->bl.opt_mem_alignment =
531 MAX(bs->bl.opt_mem_alignment,
532 bs->backing_hd->bl.opt_mem_alignment);
533 }
534
535 /* Then let the driver override it */
536 if (drv->bdrv_refresh_limits) {
537 return drv->bdrv_refresh_limits(bs);
538 }
539
540 return 0;
541 }
542
543 /*
544 * Create a uniquely-named empty temporary file.
545 * Return 0 upon success, otherwise a negative errno value.
546 */
547 int get_tmp_filename(char *filename, int size)
548 {
549 #ifdef _WIN32
550 char temp_dir[MAX_PATH];
551 /* GetTempFileName requires that its output buffer (4th param)
552 have length MAX_PATH or greater. */
553 assert(size >= MAX_PATH);
554 return (GetTempPath(MAX_PATH, temp_dir)
555 && GetTempFileName(temp_dir, "qem", 0, filename)
556 ? 0 : -GetLastError());
557 #else
558 int fd;
559 const char *tmpdir;
560 tmpdir = getenv("TMPDIR");
561 if (!tmpdir) {
562 tmpdir = "/var/tmp";
563 }
564 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
565 return -EOVERFLOW;
566 }
567 fd = mkstemp(filename);
568 if (fd < 0) {
569 return -errno;
570 }
571 if (close(fd) != 0) {
572 unlink(filename);
573 return -errno;
574 }
575 return 0;
576 #endif
577 }
578
579 /*
580 * Detect host devices. By convention, /dev/cdrom[N] is always
581 * recognized as a host CDROM.
582 */
583 static BlockDriver *find_hdev_driver(const char *filename)
584 {
585 int score_max = 0, score;
586 BlockDriver *drv = NULL, *d;
587
588 QLIST_FOREACH(d, &bdrv_drivers, list) {
589 if (d->bdrv_probe_device) {
590 score = d->bdrv_probe_device(filename);
591 if (score > score_max) {
592 score_max = score;
593 drv = d;
594 }
595 }
596 }
597
598 return drv;
599 }
600
601 BlockDriver *bdrv_find_protocol(const char *filename,
602 bool allow_protocol_prefix)
603 {
604 BlockDriver *drv1;
605 char protocol[128];
606 int len;
607 const char *p;
608
609 /* TODO Drivers without bdrv_file_open must be specified explicitly */
610
611 /*
612 * XXX(hch): we really should not let host device detection
613 * override an explicit protocol specification, but moving this
614 * later breaks access to device names with colons in them.
615 * Thanks to the brain-dead persistent naming schemes on udev-
616 * based Linux systems those actually are quite common.
617 */
618 drv1 = find_hdev_driver(filename);
619 if (drv1) {
620 return drv1;
621 }
622
623 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
624 return bdrv_find_format("file");
625 }
626
627 p = strchr(filename, ':');
628 assert(p != NULL);
629 len = p - filename;
630 if (len > sizeof(protocol) - 1)
631 len = sizeof(protocol) - 1;
632 memcpy(protocol, filename, len);
633 protocol[len] = '\0';
634 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
635 if (drv1->protocol_name &&
636 !strcmp(drv1->protocol_name, protocol)) {
637 return drv1;
638 }
639 }
640 return NULL;
641 }
642
643 static int find_image_format(BlockDriverState *bs, const char *filename,
644 BlockDriver **pdrv, Error **errp)
645 {
646 int score, score_max;
647 BlockDriver *drv1, *drv;
648 uint8_t buf[2048];
649 int ret = 0;
650
651 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
652 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
653 drv = bdrv_find_format("raw");
654 if (!drv) {
655 error_setg(errp, "Could not find raw image format");
656 ret = -ENOENT;
657 }
658 *pdrv = drv;
659 return ret;
660 }
661
662 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
663 if (ret < 0) {
664 error_setg_errno(errp, -ret, "Could not read image for determining its "
665 "format");
666 *pdrv = NULL;
667 return ret;
668 }
669
670 score_max = 0;
671 drv = NULL;
672 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
673 if (drv1->bdrv_probe) {
674 score = drv1->bdrv_probe(buf, ret, filename);
675 if (score > score_max) {
676 score_max = score;
677 drv = drv1;
678 }
679 }
680 }
681 if (!drv) {
682 error_setg(errp, "Could not determine image format: No compatible "
683 "driver found");
684 ret = -ENOENT;
685 }
686 *pdrv = drv;
687 return ret;
688 }
689
690 /**
691 * Set the current 'total_sectors' value
692 */
693 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
694 {
695 BlockDriver *drv = bs->drv;
696
697 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
698 if (bs->sg)
699 return 0;
700
701 /* query actual device if possible, otherwise just trust the hint */
702 if (drv->bdrv_getlength) {
703 int64_t length = drv->bdrv_getlength(bs);
704 if (length < 0) {
705 return length;
706 }
707 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
708 }
709
710 bs->total_sectors = hint;
711 return 0;
712 }
713
714 /**
715 * Set open flags for a given discard mode
716 *
717 * Return 0 on success, -1 if the discard mode was invalid.
718 */
719 int bdrv_parse_discard_flags(const char *mode, int *flags)
720 {
721 *flags &= ~BDRV_O_UNMAP;
722
723 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
724 /* do nothing */
725 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
726 *flags |= BDRV_O_UNMAP;
727 } else {
728 return -1;
729 }
730
731 return 0;
732 }
733
734 /**
735 * Set open flags for a given cache mode
736 *
737 * Return 0 on success, -1 if the cache mode was invalid.
738 */
739 int bdrv_parse_cache_flags(const char *mode, int *flags)
740 {
741 *flags &= ~BDRV_O_CACHE_MASK;
742
743 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
744 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
745 } else if (!strcmp(mode, "directsync")) {
746 *flags |= BDRV_O_NOCACHE;
747 } else if (!strcmp(mode, "writeback")) {
748 *flags |= BDRV_O_CACHE_WB;
749 } else if (!strcmp(mode, "unsafe")) {
750 *flags |= BDRV_O_CACHE_WB;
751 *flags |= BDRV_O_NO_FLUSH;
752 } else if (!strcmp(mode, "writethrough")) {
753 /* this is the default */
754 } else {
755 return -1;
756 }
757
758 return 0;
759 }
760
761 /**
762 * The copy-on-read flag is actually a reference count so multiple users may
763 * use the feature without worrying about clobbering its previous state.
764 * Copy-on-read stays enabled until all users have called to disable it.
765 */
766 void bdrv_enable_copy_on_read(BlockDriverState *bs)
767 {
768 bs->copy_on_read++;
769 }
770
771 void bdrv_disable_copy_on_read(BlockDriverState *bs)
772 {
773 assert(bs->copy_on_read > 0);
774 bs->copy_on_read--;
775 }
776
777 /*
778 * Returns the flags that bs->file should get, based on the given flags for
779 * the parent BDS
780 */
781 static int bdrv_inherited_flags(int flags)
782 {
783 /* Enable protocol handling, disable format probing for bs->file */
784 flags |= BDRV_O_PROTOCOL;
785
786 /* Our block drivers take care to send flushes and respect unmap policy,
787 * so we can enable both unconditionally on lower layers. */
788 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
789
790 /* The backing file of a temporary snapshot is read-only */
791 if (flags & BDRV_O_SNAPSHOT) {
792 flags &= ~BDRV_O_RDWR;
793 }
794
795 /* Clear flags that only apply to the top layer */
796 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
797
798 return flags;
799 }
800
801 /*
802 * Returns the flags that bs->backing_hd should get, based on the given flags
803 * for the parent BDS
804 */
805 static int bdrv_backing_flags(int flags)
806 {
807 /* backing files always opened read-only */
808 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
809
810 /* snapshot=on is handled on the top layer */
811 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
812
813 return flags;
814 }
815
816 static int bdrv_open_flags(BlockDriverState *bs, int flags)
817 {
818 int open_flags = flags | BDRV_O_CACHE_WB;
819
820 /* The backing file of a temporary snapshot is read-only */
821 if (flags & BDRV_O_SNAPSHOT) {
822 open_flags &= ~BDRV_O_RDWR;
823 }
824
825 /*
826 * Clear flags that are internal to the block layer before opening the
827 * image.
828 */
829 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
830
831 /*
832 * Snapshots should be writable.
833 */
834 if (flags & BDRV_O_TEMPORARY) {
835 open_flags |= BDRV_O_RDWR;
836 }
837
838 return open_flags;
839 }
840
841 static void bdrv_assign_node_name(BlockDriverState *bs,
842 const char *node_name,
843 Error **errp)
844 {
845 if (!node_name) {
846 return;
847 }
848
849 /* empty string node name is invalid */
850 if (node_name[0] == '\0') {
851 error_setg(errp, "Empty node name");
852 return;
853 }
854
855 /* takes care of avoiding namespaces collisions */
856 if (bdrv_find(node_name)) {
857 error_setg(errp, "node-name=%s is conflicting with a device id",
858 node_name);
859 return;
860 }
861
862 /* takes care of avoiding duplicates node names */
863 if (bdrv_find_node(node_name)) {
864 error_setg(errp, "Duplicate node name");
865 return;
866 }
867
868 /* copy node name into the bs and insert it into the graph list */
869 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
870 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
871 }
872
873 /*
874 * Common part for opening disk images and files
875 *
876 * Removes all processed options from *options.
877 */
878 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
879 QDict *options, int flags, BlockDriver *drv, Error **errp)
880 {
881 int ret, open_flags;
882 const char *filename;
883 const char *node_name = NULL;
884 Error *local_err = NULL;
885
886 assert(drv != NULL);
887 assert(bs->file == NULL);
888 assert(options != NULL && bs->options != options);
889
890 if (file != NULL) {
891 filename = file->filename;
892 } else {
893 filename = qdict_get_try_str(options, "filename");
894 }
895
896 if (drv->bdrv_needs_filename && !filename) {
897 error_setg(errp, "The '%s' block driver requires a file name",
898 drv->format_name);
899 return -EINVAL;
900 }
901
902 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
903
904 node_name = qdict_get_try_str(options, "node-name");
905 bdrv_assign_node_name(bs, node_name, &local_err);
906 if (local_err) {
907 error_propagate(errp, local_err);
908 return -EINVAL;
909 }
910 qdict_del(options, "node-name");
911
912 /* bdrv_open() with directly using a protocol as drv. This layer is already
913 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
914 * and return immediately. */
915 if (file != NULL && drv->bdrv_file_open) {
916 bdrv_swap(file, bs);
917 return 0;
918 }
919
920 bs->open_flags = flags;
921 bs->guest_block_size = 512;
922 bs->request_alignment = 512;
923 bs->zero_beyond_eof = true;
924 open_flags = bdrv_open_flags(bs, flags);
925 bs->read_only = !(open_flags & BDRV_O_RDWR);
926
927 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
928 error_setg(errp,
929 !bs->read_only && bdrv_is_whitelisted(drv, true)
930 ? "Driver '%s' can only be used for read-only devices"
931 : "Driver '%s' is not whitelisted",
932 drv->format_name);
933 return -ENOTSUP;
934 }
935
936 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
937 if (flags & BDRV_O_COPY_ON_READ) {
938 if (!bs->read_only) {
939 bdrv_enable_copy_on_read(bs);
940 } else {
941 error_setg(errp, "Can't use copy-on-read on read-only device");
942 return -EINVAL;
943 }
944 }
945
946 if (filename != NULL) {
947 pstrcpy(bs->filename, sizeof(bs->filename), filename);
948 } else {
949 bs->filename[0] = '\0';
950 }
951
952 bs->drv = drv;
953 bs->opaque = g_malloc0(drv->instance_size);
954
955 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
956
957 /* Open the image, either directly or using a protocol */
958 if (drv->bdrv_file_open) {
959 assert(file == NULL);
960 assert(!drv->bdrv_needs_filename || filename != NULL);
961 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
962 } else {
963 if (file == NULL) {
964 error_setg(errp, "Can't use '%s' as a block driver for the "
965 "protocol level", drv->format_name);
966 ret = -EINVAL;
967 goto free_and_fail;
968 }
969 bs->file = file;
970 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
971 }
972
973 if (ret < 0) {
974 if (local_err) {
975 error_propagate(errp, local_err);
976 } else if (bs->filename[0]) {
977 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
978 } else {
979 error_setg_errno(errp, -ret, "Could not open image");
980 }
981 goto free_and_fail;
982 }
983
984 ret = refresh_total_sectors(bs, bs->total_sectors);
985 if (ret < 0) {
986 error_setg_errno(errp, -ret, "Could not refresh total sector count");
987 goto free_and_fail;
988 }
989
990 bdrv_refresh_limits(bs);
991 assert(bdrv_opt_mem_align(bs) != 0);
992 assert((bs->request_alignment != 0) || bs->sg);
993 return 0;
994
995 free_and_fail:
996 bs->file = NULL;
997 g_free(bs->opaque);
998 bs->opaque = NULL;
999 bs->drv = NULL;
1000 return ret;
1001 }
1002
1003 /*
1004 * Opens a file using a protocol (file, host_device, nbd, ...)
1005 *
1006 * options is an indirect pointer to a QDict of options to pass to the block
1007 * drivers, or pointer to NULL for an empty set of options. If this function
1008 * takes ownership of the QDict reference, it will set *options to NULL;
1009 * otherwise, it will contain unused/unrecognized options after this function
1010 * returns. Then, the caller is responsible for freeing it. If it intends to
1011 * reuse the QDict, QINCREF() should be called beforehand.
1012 */
1013 static int bdrv_file_open(BlockDriverState *bs, const char *filename,
1014 QDict **options, int flags, Error **errp)
1015 {
1016 BlockDriver *drv;
1017 const char *drvname;
1018 bool parse_filename = false;
1019 Error *local_err = NULL;
1020 int ret;
1021
1022 /* Fetch the file name from the options QDict if necessary */
1023 if (!filename) {
1024 filename = qdict_get_try_str(*options, "filename");
1025 } else if (filename && !qdict_haskey(*options, "filename")) {
1026 qdict_put(*options, "filename", qstring_from_str(filename));
1027 parse_filename = true;
1028 } else {
1029 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
1030 "same time");
1031 ret = -EINVAL;
1032 goto fail;
1033 }
1034
1035 /* Find the right block driver */
1036 drvname = qdict_get_try_str(*options, "driver");
1037 if (drvname) {
1038 drv = bdrv_find_format(drvname);
1039 if (!drv) {
1040 error_setg(errp, "Unknown driver '%s'", drvname);
1041 }
1042 qdict_del(*options, "driver");
1043 } else if (filename) {
1044 drv = bdrv_find_protocol(filename, parse_filename);
1045 if (!drv) {
1046 error_setg(errp, "Unknown protocol");
1047 }
1048 } else {
1049 error_setg(errp, "Must specify either driver or file");
1050 drv = NULL;
1051 }
1052
1053 if (!drv) {
1054 /* errp has been set already */
1055 ret = -ENOENT;
1056 goto fail;
1057 }
1058
1059 /* Parse the filename and open it */
1060 if (drv->bdrv_parse_filename && parse_filename) {
1061 drv->bdrv_parse_filename(filename, *options, &local_err);
1062 if (local_err) {
1063 error_propagate(errp, local_err);
1064 ret = -EINVAL;
1065 goto fail;
1066 }
1067
1068 if (!drv->bdrv_needs_filename) {
1069 qdict_del(*options, "filename");
1070 } else {
1071 filename = qdict_get_str(*options, "filename");
1072 }
1073 }
1074
1075 if (!drv->bdrv_file_open) {
1076 ret = bdrv_open(&bs, filename, NULL, *options, flags, drv, &local_err);
1077 *options = NULL;
1078 } else {
1079 ret = bdrv_open_common(bs, NULL, *options, flags, drv, &local_err);
1080 }
1081 if (ret < 0) {
1082 error_propagate(errp, local_err);
1083 goto fail;
1084 }
1085
1086 bs->growable = 1;
1087 return 0;
1088
1089 fail:
1090 return ret;
1091 }
1092
1093 /*
1094 * Opens the backing file for a BlockDriverState if not yet open
1095 *
1096 * options is a QDict of options to pass to the block drivers, or NULL for an
1097 * empty set of options. The reference to the QDict is transferred to this
1098 * function (even on failure), so if the caller intends to reuse the dictionary,
1099 * it needs to use QINCREF() before calling bdrv_file_open.
1100 */
1101 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1102 {
1103 char *backing_filename = g_malloc0(PATH_MAX);
1104 int ret = 0;
1105 BlockDriver *back_drv = NULL;
1106 Error *local_err = NULL;
1107
1108 if (bs->backing_hd != NULL) {
1109 QDECREF(options);
1110 goto free_exit;
1111 }
1112
1113 /* NULL means an empty set of options */
1114 if (options == NULL) {
1115 options = qdict_new();
1116 }
1117
1118 bs->open_flags &= ~BDRV_O_NO_BACKING;
1119 if (qdict_haskey(options, "file.filename")) {
1120 backing_filename[0] = '\0';
1121 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1122 QDECREF(options);
1123 goto free_exit;
1124 } else {
1125 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1126 }
1127
1128 if (bs->backing_format[0] != '\0') {
1129 back_drv = bdrv_find_format(bs->backing_format);
1130 }
1131
1132 assert(bs->backing_hd == NULL);
1133 ret = bdrv_open(&bs->backing_hd,
1134 *backing_filename ? backing_filename : NULL, NULL, options,
1135 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1136 if (ret < 0) {
1137 bs->backing_hd = NULL;
1138 bs->open_flags |= BDRV_O_NO_BACKING;
1139 error_setg(errp, "Could not open backing file: %s",
1140 error_get_pretty(local_err));
1141 error_free(local_err);
1142 goto free_exit;
1143 }
1144
1145 if (bs->backing_hd->file) {
1146 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1147 bs->backing_hd->file->filename);
1148 }
1149
1150 /* Recalculate the BlockLimits with the backing file */
1151 bdrv_refresh_limits(bs);
1152
1153 free_exit:
1154 g_free(backing_filename);
1155 return ret;
1156 }
1157
1158 /*
1159 * Opens a disk image whose options are given as BlockdevRef in another block
1160 * device's options.
1161 *
1162 * If allow_none is true, no image will be opened if filename is false and no
1163 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1164 *
1165 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1166 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1167 * itself, all options starting with "${bdref_key}." are considered part of the
1168 * BlockdevRef.
1169 *
1170 * The BlockdevRef will be removed from the options QDict.
1171 *
1172 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1173 */
1174 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1175 QDict *options, const char *bdref_key, int flags,
1176 bool allow_none, Error **errp)
1177 {
1178 QDict *image_options;
1179 int ret;
1180 char *bdref_key_dot;
1181 const char *reference;
1182
1183 assert(pbs);
1184 assert(*pbs == NULL);
1185
1186 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1187 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1188 g_free(bdref_key_dot);
1189
1190 reference = qdict_get_try_str(options, bdref_key);
1191 if (!filename && !reference && !qdict_size(image_options)) {
1192 if (allow_none) {
1193 ret = 0;
1194 } else {
1195 error_setg(errp, "A block device must be specified for \"%s\"",
1196 bdref_key);
1197 ret = -EINVAL;
1198 }
1199 goto done;
1200 }
1201
1202 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1203
1204 done:
1205 qdict_del(options, bdref_key);
1206 return ret;
1207 }
1208
1209 void bdrv_append_temp_snapshot(BlockDriverState *bs, Error **errp)
1210 {
1211 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1212 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1213 int64_t total_size;
1214 BlockDriver *bdrv_qcow2;
1215 QEMUOptionParameter *create_options;
1216 QDict *snapshot_options;
1217 BlockDriverState *bs_snapshot;
1218 Error *local_err;
1219 int ret;
1220
1221 /* if snapshot, we create a temporary backing file and open it
1222 instead of opening 'filename' directly */
1223
1224 /* Get the required size from the image */
1225 total_size = bdrv_getlength(bs);
1226 if (total_size < 0) {
1227 error_setg_errno(errp, -total_size, "Could not get image size");
1228 goto out;
1229 }
1230 total_size &= BDRV_SECTOR_MASK;
1231
1232 /* Create the temporary image */
1233 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1234 if (ret < 0) {
1235 error_setg_errno(errp, -ret, "Could not get temporary filename");
1236 goto out;
1237 }
1238
1239 bdrv_qcow2 = bdrv_find_format("qcow2");
1240 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1241 NULL);
1242
1243 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1244
1245 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1246 free_option_parameters(create_options);
1247 if (ret < 0) {
1248 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1249 "'%s': %s", tmp_filename,
1250 error_get_pretty(local_err));
1251 error_free(local_err);
1252 goto out;
1253 }
1254
1255 /* Prepare a new options QDict for the temporary file */
1256 snapshot_options = qdict_new();
1257 qdict_put(snapshot_options, "file.driver",
1258 qstring_from_str("file"));
1259 qdict_put(snapshot_options, "file.filename",
1260 qstring_from_str(tmp_filename));
1261
1262 bs_snapshot = bdrv_new("", &error_abort);
1263
1264 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1265 (bs->open_flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY,
1266 bdrv_qcow2, &local_err);
1267 if (ret < 0) {
1268 error_propagate(errp, local_err);
1269 goto out;
1270 }
1271
1272 bdrv_append(bs_snapshot, bs);
1273
1274 out:
1275 g_free(tmp_filename);
1276 }
1277
1278 /*
1279 * Opens a disk image (raw, qcow2, vmdk, ...)
1280 *
1281 * options is a QDict of options to pass to the block drivers, or NULL for an
1282 * empty set of options. The reference to the QDict belongs to the block layer
1283 * after the call (even on failure), so if the caller intends to reuse the
1284 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1285 *
1286 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1287 * If it is not NULL, the referenced BDS will be reused.
1288 *
1289 * The reference parameter may be used to specify an existing block device which
1290 * should be opened. If specified, neither options nor a filename may be given,
1291 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1292 */
1293 int bdrv_open(BlockDriverState **pbs, const char *filename,
1294 const char *reference, QDict *options, int flags,
1295 BlockDriver *drv, Error **errp)
1296 {
1297 int ret;
1298 BlockDriverState *file = NULL, *bs;
1299 const char *drvname;
1300 Error *local_err = NULL;
1301
1302 assert(pbs);
1303
1304 if (reference) {
1305 bool options_non_empty = options ? qdict_size(options) : false;
1306 QDECREF(options);
1307
1308 if (*pbs) {
1309 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1310 "another block device");
1311 return -EINVAL;
1312 }
1313
1314 if (filename || options_non_empty) {
1315 error_setg(errp, "Cannot reference an existing block device with "
1316 "additional options or a new filename");
1317 return -EINVAL;
1318 }
1319
1320 bs = bdrv_lookup_bs(reference, reference, errp);
1321 if (!bs) {
1322 return -ENODEV;
1323 }
1324 bdrv_ref(bs);
1325 *pbs = bs;
1326 return 0;
1327 }
1328
1329 if (*pbs) {
1330 bs = *pbs;
1331 } else {
1332 bs = bdrv_new("", &error_abort);
1333 }
1334
1335 /* NULL means an empty set of options */
1336 if (options == NULL) {
1337 options = qdict_new();
1338 }
1339
1340 bs->options = options;
1341 options = qdict_clone_shallow(options);
1342
1343 if (flags & BDRV_O_PROTOCOL) {
1344 assert(!drv);
1345 ret = bdrv_file_open(bs, filename, &options, flags & ~BDRV_O_PROTOCOL,
1346 &local_err);
1347 if (!ret) {
1348 drv = bs->drv;
1349 goto done;
1350 } else if (bs->drv) {
1351 goto close_and_fail;
1352 } else {
1353 goto fail;
1354 }
1355 }
1356
1357 /* Open image file without format layer */
1358 if (flags & BDRV_O_RDWR) {
1359 flags |= BDRV_O_ALLOW_RDWR;
1360 }
1361
1362 assert(file == NULL);
1363 ret = bdrv_open_image(&file, filename, options, "file",
1364 bdrv_inherited_flags(flags),
1365 true, &local_err);
1366 if (ret < 0) {
1367 goto fail;
1368 }
1369
1370 /* Find the right image format driver */
1371 drvname = qdict_get_try_str(options, "driver");
1372 if (drvname) {
1373 drv = bdrv_find_format(drvname);
1374 qdict_del(options, "driver");
1375 if (!drv) {
1376 error_setg(errp, "Invalid driver: '%s'", drvname);
1377 ret = -EINVAL;
1378 goto fail;
1379 }
1380 }
1381
1382 if (!drv) {
1383 if (file) {
1384 ret = find_image_format(file, filename, &drv, &local_err);
1385 } else {
1386 error_setg(errp, "Must specify either driver or file");
1387 ret = -EINVAL;
1388 goto fail;
1389 }
1390 }
1391
1392 if (!drv) {
1393 goto fail;
1394 }
1395
1396 /* Open the image */
1397 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1398 if (ret < 0) {
1399 goto fail;
1400 }
1401
1402 if (file && (bs->file != file)) {
1403 bdrv_unref(file);
1404 file = NULL;
1405 }
1406
1407 /* If there is a backing file, use it */
1408 if ((flags & BDRV_O_NO_BACKING) == 0) {
1409 QDict *backing_options;
1410
1411 qdict_extract_subqdict(options, &backing_options, "backing.");
1412 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1413 if (ret < 0) {
1414 goto close_and_fail;
1415 }
1416 }
1417
1418 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1419 * temporary snapshot afterwards. */
1420 if (flags & BDRV_O_SNAPSHOT) {
1421 bdrv_append_temp_snapshot(bs, &local_err);
1422 if (local_err) {
1423 error_propagate(errp, local_err);
1424 goto close_and_fail;
1425 }
1426 }
1427
1428
1429 done:
1430 /* Check if any unknown options were used */
1431 if (options && (qdict_size(options) != 0)) {
1432 const QDictEntry *entry = qdict_first(options);
1433 if (flags & BDRV_O_PROTOCOL) {
1434 error_setg(errp, "Block protocol '%s' doesn't support the option "
1435 "'%s'", drv->format_name, entry->key);
1436 } else {
1437 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1438 "support the option '%s'", drv->format_name,
1439 bs->device_name, entry->key);
1440 }
1441
1442 ret = -EINVAL;
1443 goto close_and_fail;
1444 }
1445
1446 if (!bdrv_key_required(bs)) {
1447 bdrv_dev_change_media_cb(bs, true);
1448 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1449 && !runstate_check(RUN_STATE_INMIGRATE)
1450 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1451 error_setg(errp,
1452 "Guest must be stopped for opening of encrypted image");
1453 ret = -EBUSY;
1454 goto close_and_fail;
1455 }
1456
1457 QDECREF(options);
1458 *pbs = bs;
1459 return 0;
1460
1461 fail:
1462 if (file != NULL) {
1463 bdrv_unref(file);
1464 }
1465 QDECREF(bs->options);
1466 QDECREF(options);
1467 bs->options = NULL;
1468 if (!*pbs) {
1469 /* If *pbs is NULL, a new BDS has been created in this function and
1470 needs to be freed now. Otherwise, it does not need to be closed,
1471 since it has not really been opened yet. */
1472 bdrv_unref(bs);
1473 }
1474 if (local_err) {
1475 error_propagate(errp, local_err);
1476 }
1477 return ret;
1478
1479 close_and_fail:
1480 /* See fail path, but now the BDS has to be always closed */
1481 if (*pbs) {
1482 bdrv_close(bs);
1483 } else {
1484 bdrv_unref(bs);
1485 }
1486 QDECREF(options);
1487 if (local_err) {
1488 error_propagate(errp, local_err);
1489 }
1490 return ret;
1491 }
1492
1493 typedef struct BlockReopenQueueEntry {
1494 bool prepared;
1495 BDRVReopenState state;
1496 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1497 } BlockReopenQueueEntry;
1498
1499 /*
1500 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1501 * reopen of multiple devices.
1502 *
1503 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1504 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1505 * be created and initialized. This newly created BlockReopenQueue should be
1506 * passed back in for subsequent calls that are intended to be of the same
1507 * atomic 'set'.
1508 *
1509 * bs is the BlockDriverState to add to the reopen queue.
1510 *
1511 * flags contains the open flags for the associated bs
1512 *
1513 * returns a pointer to bs_queue, which is either the newly allocated
1514 * bs_queue, or the existing bs_queue being used.
1515 *
1516 */
1517 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1518 BlockDriverState *bs, int flags)
1519 {
1520 assert(bs != NULL);
1521
1522 BlockReopenQueueEntry *bs_entry;
1523 if (bs_queue == NULL) {
1524 bs_queue = g_new0(BlockReopenQueue, 1);
1525 QSIMPLEQ_INIT(bs_queue);
1526 }
1527
1528 /* bdrv_open() masks this flag out */
1529 flags &= ~BDRV_O_PROTOCOL;
1530
1531 if (bs->file) {
1532 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1533 }
1534
1535 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1536 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1537
1538 bs_entry->state.bs = bs;
1539 bs_entry->state.flags = flags;
1540
1541 return bs_queue;
1542 }
1543
1544 /*
1545 * Reopen multiple BlockDriverStates atomically & transactionally.
1546 *
1547 * The queue passed in (bs_queue) must have been built up previous
1548 * via bdrv_reopen_queue().
1549 *
1550 * Reopens all BDS specified in the queue, with the appropriate
1551 * flags. All devices are prepared for reopen, and failure of any
1552 * device will cause all device changes to be abandonded, and intermediate
1553 * data cleaned up.
1554 *
1555 * If all devices prepare successfully, then the changes are committed
1556 * to all devices.
1557 *
1558 */
1559 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1560 {
1561 int ret = -1;
1562 BlockReopenQueueEntry *bs_entry, *next;
1563 Error *local_err = NULL;
1564
1565 assert(bs_queue != NULL);
1566
1567 bdrv_drain_all();
1568
1569 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1570 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1571 error_propagate(errp, local_err);
1572 goto cleanup;
1573 }
1574 bs_entry->prepared = true;
1575 }
1576
1577 /* If we reach this point, we have success and just need to apply the
1578 * changes
1579 */
1580 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1581 bdrv_reopen_commit(&bs_entry->state);
1582 }
1583
1584 ret = 0;
1585
1586 cleanup:
1587 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1588 if (ret && bs_entry->prepared) {
1589 bdrv_reopen_abort(&bs_entry->state);
1590 }
1591 g_free(bs_entry);
1592 }
1593 g_free(bs_queue);
1594 return ret;
1595 }
1596
1597
1598 /* Reopen a single BlockDriverState with the specified flags. */
1599 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1600 {
1601 int ret = -1;
1602 Error *local_err = NULL;
1603 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1604
1605 ret = bdrv_reopen_multiple(queue, &local_err);
1606 if (local_err != NULL) {
1607 error_propagate(errp, local_err);
1608 }
1609 return ret;
1610 }
1611
1612
1613 /*
1614 * Prepares a BlockDriverState for reopen. All changes are staged in the
1615 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1616 * the block driver layer .bdrv_reopen_prepare()
1617 *
1618 * bs is the BlockDriverState to reopen
1619 * flags are the new open flags
1620 * queue is the reopen queue
1621 *
1622 * Returns 0 on success, non-zero on error. On error errp will be set
1623 * as well.
1624 *
1625 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1626 * It is the responsibility of the caller to then call the abort() or
1627 * commit() for any other BDS that have been left in a prepare() state
1628 *
1629 */
1630 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1631 Error **errp)
1632 {
1633 int ret = -1;
1634 Error *local_err = NULL;
1635 BlockDriver *drv;
1636
1637 assert(reopen_state != NULL);
1638 assert(reopen_state->bs->drv != NULL);
1639 drv = reopen_state->bs->drv;
1640
1641 /* if we are to stay read-only, do not allow permission change
1642 * to r/w */
1643 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1644 reopen_state->flags & BDRV_O_RDWR) {
1645 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1646 reopen_state->bs->device_name);
1647 goto error;
1648 }
1649
1650
1651 ret = bdrv_flush(reopen_state->bs);
1652 if (ret) {
1653 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1654 strerror(-ret));
1655 goto error;
1656 }
1657
1658 if (drv->bdrv_reopen_prepare) {
1659 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1660 if (ret) {
1661 if (local_err != NULL) {
1662 error_propagate(errp, local_err);
1663 } else {
1664 error_setg(errp, "failed while preparing to reopen image '%s'",
1665 reopen_state->bs->filename);
1666 }
1667 goto error;
1668 }
1669 } else {
1670 /* It is currently mandatory to have a bdrv_reopen_prepare()
1671 * handler for each supported drv. */
1672 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1673 drv->format_name, reopen_state->bs->device_name,
1674 "reopening of file");
1675 ret = -1;
1676 goto error;
1677 }
1678
1679 ret = 0;
1680
1681 error:
1682 return ret;
1683 }
1684
1685 /*
1686 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1687 * makes them final by swapping the staging BlockDriverState contents into
1688 * the active BlockDriverState contents.
1689 */
1690 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1691 {
1692 BlockDriver *drv;
1693
1694 assert(reopen_state != NULL);
1695 drv = reopen_state->bs->drv;
1696 assert(drv != NULL);
1697
1698 /* If there are any driver level actions to take */
1699 if (drv->bdrv_reopen_commit) {
1700 drv->bdrv_reopen_commit(reopen_state);
1701 }
1702
1703 /* set BDS specific flags now */
1704 reopen_state->bs->open_flags = reopen_state->flags;
1705 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1706 BDRV_O_CACHE_WB);
1707 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1708
1709 bdrv_refresh_limits(reopen_state->bs);
1710 }
1711
1712 /*
1713 * Abort the reopen, and delete and free the staged changes in
1714 * reopen_state
1715 */
1716 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1717 {
1718 BlockDriver *drv;
1719
1720 assert(reopen_state != NULL);
1721 drv = reopen_state->bs->drv;
1722 assert(drv != NULL);
1723
1724 if (drv->bdrv_reopen_abort) {
1725 drv->bdrv_reopen_abort(reopen_state);
1726 }
1727 }
1728
1729
1730 void bdrv_close(BlockDriverState *bs)
1731 {
1732 if (bs->job) {
1733 block_job_cancel_sync(bs->job);
1734 }
1735 bdrv_drain_all(); /* complete I/O */
1736 bdrv_flush(bs);
1737 bdrv_drain_all(); /* in case flush left pending I/O */
1738 notifier_list_notify(&bs->close_notifiers, bs);
1739
1740 if (bs->drv) {
1741 if (bs->backing_hd) {
1742 bdrv_unref(bs->backing_hd);
1743 bs->backing_hd = NULL;
1744 }
1745 bs->drv->bdrv_close(bs);
1746 g_free(bs->opaque);
1747 bs->opaque = NULL;
1748 bs->drv = NULL;
1749 bs->copy_on_read = 0;
1750 bs->backing_file[0] = '\0';
1751 bs->backing_format[0] = '\0';
1752 bs->total_sectors = 0;
1753 bs->encrypted = 0;
1754 bs->valid_key = 0;
1755 bs->sg = 0;
1756 bs->growable = 0;
1757 bs->zero_beyond_eof = false;
1758 QDECREF(bs->options);
1759 bs->options = NULL;
1760
1761 if (bs->file != NULL) {
1762 bdrv_unref(bs->file);
1763 bs->file = NULL;
1764 }
1765 }
1766
1767 bdrv_dev_change_media_cb(bs, false);
1768
1769 /*throttling disk I/O limits*/
1770 if (bs->io_limits_enabled) {
1771 bdrv_io_limits_disable(bs);
1772 }
1773 }
1774
1775 void bdrv_close_all(void)
1776 {
1777 BlockDriverState *bs;
1778
1779 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1780 bdrv_close(bs);
1781 }
1782 }
1783
1784 /* Check if any requests are in-flight (including throttled requests) */
1785 static bool bdrv_requests_pending(BlockDriverState *bs)
1786 {
1787 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1788 return true;
1789 }
1790 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1791 return true;
1792 }
1793 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1794 return true;
1795 }
1796 if (bs->file && bdrv_requests_pending(bs->file)) {
1797 return true;
1798 }
1799 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1800 return true;
1801 }
1802 return false;
1803 }
1804
1805 static bool bdrv_requests_pending_all(void)
1806 {
1807 BlockDriverState *bs;
1808 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1809 if (bdrv_requests_pending(bs)) {
1810 return true;
1811 }
1812 }
1813 return false;
1814 }
1815
1816 /*
1817 * Wait for pending requests to complete across all BlockDriverStates
1818 *
1819 * This function does not flush data to disk, use bdrv_flush_all() for that
1820 * after calling this function.
1821 *
1822 * Note that completion of an asynchronous I/O operation can trigger any
1823 * number of other I/O operations on other devices---for example a coroutine
1824 * can be arbitrarily complex and a constant flow of I/O can come until the
1825 * coroutine is complete. Because of this, it is not possible to have a
1826 * function to drain a single device's I/O queue.
1827 */
1828 void bdrv_drain_all(void)
1829 {
1830 /* Always run first iteration so any pending completion BHs run */
1831 bool busy = true;
1832 BlockDriverState *bs;
1833
1834 while (busy) {
1835 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1836 bdrv_start_throttled_reqs(bs);
1837 }
1838
1839 busy = bdrv_requests_pending_all();
1840 busy |= aio_poll(qemu_get_aio_context(), busy);
1841 }
1842 }
1843
1844 /* make a BlockDriverState anonymous by removing from bdrv_state and
1845 * graph_bdrv_state list.
1846 Also, NULL terminate the device_name to prevent double remove */
1847 void bdrv_make_anon(BlockDriverState *bs)
1848 {
1849 if (bs->device_name[0] != '\0') {
1850 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1851 }
1852 bs->device_name[0] = '\0';
1853 if (bs->node_name[0] != '\0') {
1854 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1855 }
1856 bs->node_name[0] = '\0';
1857 }
1858
1859 static void bdrv_rebind(BlockDriverState *bs)
1860 {
1861 if (bs->drv && bs->drv->bdrv_rebind) {
1862 bs->drv->bdrv_rebind(bs);
1863 }
1864 }
1865
1866 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1867 BlockDriverState *bs_src)
1868 {
1869 /* move some fields that need to stay attached to the device */
1870
1871 /* dev info */
1872 bs_dest->dev_ops = bs_src->dev_ops;
1873 bs_dest->dev_opaque = bs_src->dev_opaque;
1874 bs_dest->dev = bs_src->dev;
1875 bs_dest->guest_block_size = bs_src->guest_block_size;
1876 bs_dest->copy_on_read = bs_src->copy_on_read;
1877
1878 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1879
1880 /* i/o throttled req */
1881 memcpy(&bs_dest->throttle_state,
1882 &bs_src->throttle_state,
1883 sizeof(ThrottleState));
1884 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1885 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1886 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1887
1888 /* r/w error */
1889 bs_dest->on_read_error = bs_src->on_read_error;
1890 bs_dest->on_write_error = bs_src->on_write_error;
1891
1892 /* i/o status */
1893 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1894 bs_dest->iostatus = bs_src->iostatus;
1895
1896 /* dirty bitmap */
1897 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1898
1899 /* reference count */
1900 bs_dest->refcnt = bs_src->refcnt;
1901
1902 /* job */
1903 bs_dest->in_use = bs_src->in_use;
1904 bs_dest->job = bs_src->job;
1905
1906 /* keep the same entry in bdrv_states */
1907 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1908 bs_src->device_name);
1909 bs_dest->device_list = bs_src->device_list;
1910 }
1911
1912 /*
1913 * Swap bs contents for two image chains while they are live,
1914 * while keeping required fields on the BlockDriverState that is
1915 * actually attached to a device.
1916 *
1917 * This will modify the BlockDriverState fields, and swap contents
1918 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1919 *
1920 * bs_new is required to be anonymous.
1921 *
1922 * This function does not create any image files.
1923 */
1924 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1925 {
1926 BlockDriverState tmp;
1927
1928 /* The code needs to swap the node_name but simply swapping node_list won't
1929 * work so first remove the nodes from the graph list, do the swap then
1930 * insert them back if needed.
1931 */
1932 if (bs_new->node_name[0] != '\0') {
1933 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
1934 }
1935 if (bs_old->node_name[0] != '\0') {
1936 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
1937 }
1938
1939 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1940 assert(bs_new->device_name[0] == '\0');
1941 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1942 assert(bs_new->job == NULL);
1943 assert(bs_new->dev == NULL);
1944 assert(bs_new->in_use == 0);
1945 assert(bs_new->io_limits_enabled == false);
1946 assert(!throttle_have_timer(&bs_new->throttle_state));
1947
1948 tmp = *bs_new;
1949 *bs_new = *bs_old;
1950 *bs_old = tmp;
1951
1952 /* there are some fields that should not be swapped, move them back */
1953 bdrv_move_feature_fields(&tmp, bs_old);
1954 bdrv_move_feature_fields(bs_old, bs_new);
1955 bdrv_move_feature_fields(bs_new, &tmp);
1956
1957 /* bs_new shouldn't be in bdrv_states even after the swap! */
1958 assert(bs_new->device_name[0] == '\0');
1959
1960 /* Check a few fields that should remain attached to the device */
1961 assert(bs_new->dev == NULL);
1962 assert(bs_new->job == NULL);
1963 assert(bs_new->in_use == 0);
1964 assert(bs_new->io_limits_enabled == false);
1965 assert(!throttle_have_timer(&bs_new->throttle_state));
1966
1967 /* insert the nodes back into the graph node list if needed */
1968 if (bs_new->node_name[0] != '\0') {
1969 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
1970 }
1971 if (bs_old->node_name[0] != '\0') {
1972 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
1973 }
1974
1975 bdrv_rebind(bs_new);
1976 bdrv_rebind(bs_old);
1977 }
1978
1979 /*
1980 * Add new bs contents at the top of an image chain while the chain is
1981 * live, while keeping required fields on the top layer.
1982 *
1983 * This will modify the BlockDriverState fields, and swap contents
1984 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1985 *
1986 * bs_new is required to be anonymous.
1987 *
1988 * This function does not create any image files.
1989 */
1990 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1991 {
1992 bdrv_swap(bs_new, bs_top);
1993
1994 /* The contents of 'tmp' will become bs_top, as we are
1995 * swapping bs_new and bs_top contents. */
1996 bs_top->backing_hd = bs_new;
1997 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1998 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1999 bs_new->filename);
2000 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
2001 bs_new->drv ? bs_new->drv->format_name : "");
2002 }
2003
2004 static void bdrv_delete(BlockDriverState *bs)
2005 {
2006 assert(!bs->dev);
2007 assert(!bs->job);
2008 assert(!bs->in_use);
2009 assert(!bs->refcnt);
2010 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2011
2012 bdrv_close(bs);
2013
2014 /* remove from list, if necessary */
2015 bdrv_make_anon(bs);
2016
2017 g_free(bs);
2018 }
2019
2020 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2021 /* TODO change to DeviceState *dev when all users are qdevified */
2022 {
2023 if (bs->dev) {
2024 return -EBUSY;
2025 }
2026 bs->dev = dev;
2027 bdrv_iostatus_reset(bs);
2028 return 0;
2029 }
2030
2031 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2032 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2033 {
2034 if (bdrv_attach_dev(bs, dev) < 0) {
2035 abort();
2036 }
2037 }
2038
2039 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2040 /* TODO change to DeviceState *dev when all users are qdevified */
2041 {
2042 assert(bs->dev == dev);
2043 bs->dev = NULL;
2044 bs->dev_ops = NULL;
2045 bs->dev_opaque = NULL;
2046 bs->guest_block_size = 512;
2047 }
2048
2049 /* TODO change to return DeviceState * when all users are qdevified */
2050 void *bdrv_get_attached_dev(BlockDriverState *bs)
2051 {
2052 return bs->dev;
2053 }
2054
2055 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2056 void *opaque)
2057 {
2058 bs->dev_ops = ops;
2059 bs->dev_opaque = opaque;
2060 }
2061
2062 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
2063 enum MonitorEvent ev,
2064 BlockErrorAction action, bool is_read)
2065 {
2066 QObject *data;
2067 const char *action_str;
2068
2069 switch (action) {
2070 case BDRV_ACTION_REPORT:
2071 action_str = "report";
2072 break;
2073 case BDRV_ACTION_IGNORE:
2074 action_str = "ignore";
2075 break;
2076 case BDRV_ACTION_STOP:
2077 action_str = "stop";
2078 break;
2079 default:
2080 abort();
2081 }
2082
2083 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
2084 bdrv->device_name,
2085 action_str,
2086 is_read ? "read" : "write");
2087 monitor_protocol_event(ev, data);
2088
2089 qobject_decref(data);
2090 }
2091
2092 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
2093 {
2094 QObject *data;
2095
2096 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
2097 bdrv_get_device_name(bs), ejected);
2098 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
2099
2100 qobject_decref(data);
2101 }
2102
2103 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2104 {
2105 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2106 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2107 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2108 if (tray_was_closed) {
2109 /* tray open */
2110 bdrv_emit_qmp_eject_event(bs, true);
2111 }
2112 if (load) {
2113 /* tray close */
2114 bdrv_emit_qmp_eject_event(bs, false);
2115 }
2116 }
2117 }
2118
2119 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2120 {
2121 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2122 }
2123
2124 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2125 {
2126 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2127 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2128 }
2129 }
2130
2131 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2132 {
2133 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2134 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2135 }
2136 return false;
2137 }
2138
2139 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2140 {
2141 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2142 bs->dev_ops->resize_cb(bs->dev_opaque);
2143 }
2144 }
2145
2146 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2147 {
2148 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2149 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2150 }
2151 return false;
2152 }
2153
2154 /*
2155 * Run consistency checks on an image
2156 *
2157 * Returns 0 if the check could be completed (it doesn't mean that the image is
2158 * free of errors) or -errno when an internal error occurred. The results of the
2159 * check are stored in res.
2160 */
2161 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2162 {
2163 if (bs->drv->bdrv_check == NULL) {
2164 return -ENOTSUP;
2165 }
2166
2167 memset(res, 0, sizeof(*res));
2168 return bs->drv->bdrv_check(bs, res, fix);
2169 }
2170
2171 #define COMMIT_BUF_SECTORS 2048
2172
2173 /* commit COW file into the raw image */
2174 int bdrv_commit(BlockDriverState *bs)
2175 {
2176 BlockDriver *drv = bs->drv;
2177 int64_t sector, total_sectors, length, backing_length;
2178 int n, ro, open_flags;
2179 int ret = 0;
2180 uint8_t *buf = NULL;
2181 char filename[PATH_MAX];
2182
2183 if (!drv)
2184 return -ENOMEDIUM;
2185
2186 if (!bs->backing_hd) {
2187 return -ENOTSUP;
2188 }
2189
2190 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
2191 return -EBUSY;
2192 }
2193
2194 ro = bs->backing_hd->read_only;
2195 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2196 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2197 open_flags = bs->backing_hd->open_flags;
2198
2199 if (ro) {
2200 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2201 return -EACCES;
2202 }
2203 }
2204
2205 length = bdrv_getlength(bs);
2206 if (length < 0) {
2207 ret = length;
2208 goto ro_cleanup;
2209 }
2210
2211 backing_length = bdrv_getlength(bs->backing_hd);
2212 if (backing_length < 0) {
2213 ret = backing_length;
2214 goto ro_cleanup;
2215 }
2216
2217 /* If our top snapshot is larger than the backing file image,
2218 * grow the backing file image if possible. If not possible,
2219 * we must return an error */
2220 if (length > backing_length) {
2221 ret = bdrv_truncate(bs->backing_hd, length);
2222 if (ret < 0) {
2223 goto ro_cleanup;
2224 }
2225 }
2226
2227 total_sectors = length >> BDRV_SECTOR_BITS;
2228 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2229
2230 for (sector = 0; sector < total_sectors; sector += n) {
2231 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2232 if (ret < 0) {
2233 goto ro_cleanup;
2234 }
2235 if (ret) {
2236 ret = bdrv_read(bs, sector, buf, n);
2237 if (ret < 0) {
2238 goto ro_cleanup;
2239 }
2240
2241 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2242 if (ret < 0) {
2243 goto ro_cleanup;
2244 }
2245 }
2246 }
2247
2248 if (drv->bdrv_make_empty) {
2249 ret = drv->bdrv_make_empty(bs);
2250 if (ret < 0) {
2251 goto ro_cleanup;
2252 }
2253 bdrv_flush(bs);
2254 }
2255
2256 /*
2257 * Make sure all data we wrote to the backing device is actually
2258 * stable on disk.
2259 */
2260 if (bs->backing_hd) {
2261 bdrv_flush(bs->backing_hd);
2262 }
2263
2264 ret = 0;
2265 ro_cleanup:
2266 g_free(buf);
2267
2268 if (ro) {
2269 /* ignoring error return here */
2270 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2271 }
2272
2273 return ret;
2274 }
2275
2276 int bdrv_commit_all(void)
2277 {
2278 BlockDriverState *bs;
2279
2280 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2281 if (bs->drv && bs->backing_hd) {
2282 int ret = bdrv_commit(bs);
2283 if (ret < 0) {
2284 return ret;
2285 }
2286 }
2287 }
2288 return 0;
2289 }
2290
2291 /**
2292 * Remove an active request from the tracked requests list
2293 *
2294 * This function should be called when a tracked request is completing.
2295 */
2296 static void tracked_request_end(BdrvTrackedRequest *req)
2297 {
2298 if (req->serialising) {
2299 req->bs->serialising_in_flight--;
2300 }
2301
2302 QLIST_REMOVE(req, list);
2303 qemu_co_queue_restart_all(&req->wait_queue);
2304 }
2305
2306 /**
2307 * Add an active request to the tracked requests list
2308 */
2309 static void tracked_request_begin(BdrvTrackedRequest *req,
2310 BlockDriverState *bs,
2311 int64_t offset,
2312 unsigned int bytes, bool is_write)
2313 {
2314 *req = (BdrvTrackedRequest){
2315 .bs = bs,
2316 .offset = offset,
2317 .bytes = bytes,
2318 .is_write = is_write,
2319 .co = qemu_coroutine_self(),
2320 .serialising = false,
2321 .overlap_offset = offset,
2322 .overlap_bytes = bytes,
2323 };
2324
2325 qemu_co_queue_init(&req->wait_queue);
2326
2327 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2328 }
2329
2330 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2331 {
2332 int64_t overlap_offset = req->offset & ~(align - 1);
2333 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2334 - overlap_offset;
2335
2336 if (!req->serialising) {
2337 req->bs->serialising_in_flight++;
2338 req->serialising = true;
2339 }
2340
2341 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2342 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2343 }
2344
2345 /**
2346 * Round a region to cluster boundaries
2347 */
2348 void bdrv_round_to_clusters(BlockDriverState *bs,
2349 int64_t sector_num, int nb_sectors,
2350 int64_t *cluster_sector_num,
2351 int *cluster_nb_sectors)
2352 {
2353 BlockDriverInfo bdi;
2354
2355 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2356 *cluster_sector_num = sector_num;
2357 *cluster_nb_sectors = nb_sectors;
2358 } else {
2359 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2360 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2361 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2362 nb_sectors, c);
2363 }
2364 }
2365
2366 static int bdrv_get_cluster_size(BlockDriverState *bs)
2367 {
2368 BlockDriverInfo bdi;
2369 int ret;
2370
2371 ret = bdrv_get_info(bs, &bdi);
2372 if (ret < 0 || bdi.cluster_size == 0) {
2373 return bs->request_alignment;
2374 } else {
2375 return bdi.cluster_size;
2376 }
2377 }
2378
2379 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2380 int64_t offset, unsigned int bytes)
2381 {
2382 /* aaaa bbbb */
2383 if (offset >= req->overlap_offset + req->overlap_bytes) {
2384 return false;
2385 }
2386 /* bbbb aaaa */
2387 if (req->overlap_offset >= offset + bytes) {
2388 return false;
2389 }
2390 return true;
2391 }
2392
2393 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2394 {
2395 BlockDriverState *bs = self->bs;
2396 BdrvTrackedRequest *req;
2397 bool retry;
2398 bool waited = false;
2399
2400 if (!bs->serialising_in_flight) {
2401 return false;
2402 }
2403
2404 do {
2405 retry = false;
2406 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2407 if (req == self || (!req->serialising && !self->serialising)) {
2408 continue;
2409 }
2410 if (tracked_request_overlaps(req, self->overlap_offset,
2411 self->overlap_bytes))
2412 {
2413 /* Hitting this means there was a reentrant request, for
2414 * example, a block driver issuing nested requests. This must
2415 * never happen since it means deadlock.
2416 */
2417 assert(qemu_coroutine_self() != req->co);
2418
2419 /* If the request is already (indirectly) waiting for us, or
2420 * will wait for us as soon as it wakes up, then just go on
2421 * (instead of producing a deadlock in the former case). */
2422 if (!req->waiting_for) {
2423 self->waiting_for = req;
2424 qemu_co_queue_wait(&req->wait_queue);
2425 self->waiting_for = NULL;
2426 retry = true;
2427 waited = true;
2428 break;
2429 }
2430 }
2431 }
2432 } while (retry);
2433
2434 return waited;
2435 }
2436
2437 /*
2438 * Return values:
2439 * 0 - success
2440 * -EINVAL - backing format specified, but no file
2441 * -ENOSPC - can't update the backing file because no space is left in the
2442 * image file header
2443 * -ENOTSUP - format driver doesn't support changing the backing file
2444 */
2445 int bdrv_change_backing_file(BlockDriverState *bs,
2446 const char *backing_file, const char *backing_fmt)
2447 {
2448 BlockDriver *drv = bs->drv;
2449 int ret;
2450
2451 /* Backing file format doesn't make sense without a backing file */
2452 if (backing_fmt && !backing_file) {
2453 return -EINVAL;
2454 }
2455
2456 if (drv->bdrv_change_backing_file != NULL) {
2457 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2458 } else {
2459 ret = -ENOTSUP;
2460 }
2461
2462 if (ret == 0) {
2463 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2464 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2465 }
2466 return ret;
2467 }
2468
2469 /*
2470 * Finds the image layer in the chain that has 'bs' as its backing file.
2471 *
2472 * active is the current topmost image.
2473 *
2474 * Returns NULL if bs is not found in active's image chain,
2475 * or if active == bs.
2476 */
2477 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2478 BlockDriverState *bs)
2479 {
2480 BlockDriverState *overlay = NULL;
2481 BlockDriverState *intermediate;
2482
2483 assert(active != NULL);
2484 assert(bs != NULL);
2485
2486 /* if bs is the same as active, then by definition it has no overlay
2487 */
2488 if (active == bs) {
2489 return NULL;
2490 }
2491
2492 intermediate = active;
2493 while (intermediate->backing_hd) {
2494 if (intermediate->backing_hd == bs) {
2495 overlay = intermediate;
2496 break;
2497 }
2498 intermediate = intermediate->backing_hd;
2499 }
2500
2501 return overlay;
2502 }
2503
2504 typedef struct BlkIntermediateStates {
2505 BlockDriverState *bs;
2506 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2507 } BlkIntermediateStates;
2508
2509
2510 /*
2511 * Drops images above 'base' up to and including 'top', and sets the image
2512 * above 'top' to have base as its backing file.
2513 *
2514 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2515 * information in 'bs' can be properly updated.
2516 *
2517 * E.g., this will convert the following chain:
2518 * bottom <- base <- intermediate <- top <- active
2519 *
2520 * to
2521 *
2522 * bottom <- base <- active
2523 *
2524 * It is allowed for bottom==base, in which case it converts:
2525 *
2526 * base <- intermediate <- top <- active
2527 *
2528 * to
2529 *
2530 * base <- active
2531 *
2532 * Error conditions:
2533 * if active == top, that is considered an error
2534 *
2535 */
2536 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2537 BlockDriverState *base)
2538 {
2539 BlockDriverState *intermediate;
2540 BlockDriverState *base_bs = NULL;
2541 BlockDriverState *new_top_bs = NULL;
2542 BlkIntermediateStates *intermediate_state, *next;
2543 int ret = -EIO;
2544
2545 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2546 QSIMPLEQ_INIT(&states_to_delete);
2547
2548 if (!top->drv || !base->drv) {
2549 goto exit;
2550 }
2551
2552 new_top_bs = bdrv_find_overlay(active, top);
2553
2554 if (new_top_bs == NULL) {
2555 /* we could not find the image above 'top', this is an error */
2556 goto exit;
2557 }
2558
2559 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2560 * to do, no intermediate images */
2561 if (new_top_bs->backing_hd == base) {
2562 ret = 0;
2563 goto exit;
2564 }
2565
2566 intermediate = top;
2567
2568 /* now we will go down through the list, and add each BDS we find
2569 * into our deletion queue, until we hit the 'base'
2570 */
2571 while (intermediate) {
2572 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2573 intermediate_state->bs = intermediate;
2574 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2575
2576 if (intermediate->backing_hd == base) {
2577 base_bs = intermediate->backing_hd;
2578 break;
2579 }
2580 intermediate = intermediate->backing_hd;
2581 }
2582 if (base_bs == NULL) {
2583 /* something went wrong, we did not end at the base. safely
2584 * unravel everything, and exit with error */
2585 goto exit;
2586 }
2587
2588 /* success - we can delete the intermediate states, and link top->base */
2589 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2590 base_bs->drv ? base_bs->drv->format_name : "");
2591 if (ret) {
2592 goto exit;
2593 }
2594 new_top_bs->backing_hd = base_bs;
2595
2596 bdrv_refresh_limits(new_top_bs);
2597
2598 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2599 /* so that bdrv_close() does not recursively close the chain */
2600 intermediate_state->bs->backing_hd = NULL;
2601 bdrv_unref(intermediate_state->bs);
2602 }
2603 ret = 0;
2604
2605 exit:
2606 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2607 g_free(intermediate_state);
2608 }
2609 return ret;
2610 }
2611
2612
2613 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2614 size_t size)
2615 {
2616 int64_t len;
2617
2618 if (size > INT_MAX) {
2619 return -EIO;
2620 }
2621
2622 if (!bdrv_is_inserted(bs))
2623 return -ENOMEDIUM;
2624
2625 if (bs->growable)
2626 return 0;
2627
2628 len = bdrv_getlength(bs);
2629
2630 if (offset < 0)
2631 return -EIO;
2632
2633 if ((offset > len) || (len - offset < size))
2634 return -EIO;
2635
2636 return 0;
2637 }
2638
2639 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2640 int nb_sectors)
2641 {
2642 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2643 return -EIO;
2644 }
2645
2646 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2647 nb_sectors * BDRV_SECTOR_SIZE);
2648 }
2649
2650 typedef struct RwCo {
2651 BlockDriverState *bs;
2652 int64_t offset;
2653 QEMUIOVector *qiov;
2654 bool is_write;
2655 int ret;
2656 BdrvRequestFlags flags;
2657 } RwCo;
2658
2659 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2660 {
2661 RwCo *rwco = opaque;
2662
2663 if (!rwco->is_write) {
2664 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2665 rwco->qiov->size, rwco->qiov,
2666 rwco->flags);
2667 } else {
2668 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2669 rwco->qiov->size, rwco->qiov,
2670 rwco->flags);
2671 }
2672 }
2673
2674 /*
2675 * Process a vectored synchronous request using coroutines
2676 */
2677 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2678 QEMUIOVector *qiov, bool is_write,
2679 BdrvRequestFlags flags)
2680 {
2681 Coroutine *co;
2682 RwCo rwco = {
2683 .bs = bs,
2684 .offset = offset,
2685 .qiov = qiov,
2686 .is_write = is_write,
2687 .ret = NOT_DONE,
2688 .flags = flags,
2689 };
2690
2691 /**
2692 * In sync call context, when the vcpu is blocked, this throttling timer
2693 * will not fire; so the I/O throttling function has to be disabled here
2694 * if it has been enabled.
2695 */
2696 if (bs->io_limits_enabled) {
2697 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2698 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2699 bdrv_io_limits_disable(bs);
2700 }
2701
2702 if (qemu_in_coroutine()) {
2703 /* Fast-path if already in coroutine context */
2704 bdrv_rw_co_entry(&rwco);
2705 } else {
2706 co = qemu_coroutine_create(bdrv_rw_co_entry);
2707 qemu_coroutine_enter(co, &rwco);
2708 while (rwco.ret == NOT_DONE) {
2709 qemu_aio_wait();
2710 }
2711 }
2712 return rwco.ret;
2713 }
2714
2715 /*
2716 * Process a synchronous request using coroutines
2717 */
2718 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2719 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2720 {
2721 QEMUIOVector qiov;
2722 struct iovec iov = {
2723 .iov_base = (void *)buf,
2724 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2725 };
2726
2727 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2728 return -EINVAL;
2729 }
2730
2731 qemu_iovec_init_external(&qiov, &iov, 1);
2732 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2733 &qiov, is_write, flags);
2734 }
2735
2736 /* return < 0 if error. See bdrv_write() for the return codes */
2737 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2738 uint8_t *buf, int nb_sectors)
2739 {
2740 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2741 }
2742
2743 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2744 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2745 uint8_t *buf, int nb_sectors)
2746 {
2747 bool enabled;
2748 int ret;
2749
2750 enabled = bs->io_limits_enabled;
2751 bs->io_limits_enabled = false;
2752 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2753 bs->io_limits_enabled = enabled;
2754 return ret;
2755 }
2756
2757 /* Return < 0 if error. Important errors are:
2758 -EIO generic I/O error (may happen for all errors)
2759 -ENOMEDIUM No media inserted.
2760 -EINVAL Invalid sector number or nb_sectors
2761 -EACCES Trying to write a read-only device
2762 */
2763 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2764 const uint8_t *buf, int nb_sectors)
2765 {
2766 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2767 }
2768
2769 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2770 int nb_sectors, BdrvRequestFlags flags)
2771 {
2772 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2773 BDRV_REQ_ZERO_WRITE | flags);
2774 }
2775
2776 /*
2777 * Completely zero out a block device with the help of bdrv_write_zeroes.
2778 * The operation is sped up by checking the block status and only writing
2779 * zeroes to the device if they currently do not return zeroes. Optional
2780 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2781 *
2782 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2783 */
2784 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2785 {
2786 int64_t target_size;
2787 int64_t ret, nb_sectors, sector_num = 0;
2788 int n;
2789
2790 target_size = bdrv_getlength(bs);
2791 if (target_size < 0) {
2792 return target_size;
2793 }
2794 target_size /= BDRV_SECTOR_SIZE;
2795
2796 for (;;) {
2797 nb_sectors = target_size - sector_num;
2798 if (nb_sectors <= 0) {
2799 return 0;
2800 }
2801 if (nb_sectors > INT_MAX) {
2802 nb_sectors = INT_MAX;
2803 }
2804 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2805 if (ret < 0) {
2806 error_report("error getting block status at sector %" PRId64 ": %s",
2807 sector_num, strerror(-ret));
2808 return ret;
2809 }
2810 if (ret & BDRV_BLOCK_ZERO) {
2811 sector_num += n;
2812 continue;
2813 }
2814 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2815 if (ret < 0) {
2816 error_report("error writing zeroes at sector %" PRId64 ": %s",
2817 sector_num, strerror(-ret));
2818 return ret;
2819 }
2820 sector_num += n;
2821 }
2822 }
2823
2824 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2825 {
2826 QEMUIOVector qiov;
2827 struct iovec iov = {
2828 .iov_base = (void *)buf,
2829 .iov_len = bytes,
2830 };
2831 int ret;
2832
2833 if (bytes < 0) {
2834 return -EINVAL;
2835 }
2836
2837 qemu_iovec_init_external(&qiov, &iov, 1);
2838 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2839 if (ret < 0) {
2840 return ret;
2841 }
2842
2843 return bytes;
2844 }
2845
2846 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2847 {
2848 int ret;
2849
2850 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2851 if (ret < 0) {
2852 return ret;
2853 }
2854
2855 return qiov->size;
2856 }
2857
2858 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2859 const void *buf, int bytes)
2860 {
2861 QEMUIOVector qiov;
2862 struct iovec iov = {
2863 .iov_base = (void *) buf,
2864 .iov_len = bytes,
2865 };
2866
2867 if (bytes < 0) {
2868 return -EINVAL;
2869 }
2870
2871 qemu_iovec_init_external(&qiov, &iov, 1);
2872 return bdrv_pwritev(bs, offset, &qiov);
2873 }
2874
2875 /*
2876 * Writes to the file and ensures that no writes are reordered across this
2877 * request (acts as a barrier)
2878 *
2879 * Returns 0 on success, -errno in error cases.
2880 */
2881 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2882 const void *buf, int count)
2883 {
2884 int ret;
2885
2886 ret = bdrv_pwrite(bs, offset, buf, count);
2887 if (ret < 0) {
2888 return ret;
2889 }
2890
2891 /* No flush needed for cache modes that already do it */
2892 if (bs->enable_write_cache) {
2893 bdrv_flush(bs);
2894 }
2895
2896 return 0;
2897 }
2898
2899 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2900 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2901 {
2902 /* Perform I/O through a temporary buffer so that users who scribble over
2903 * their read buffer while the operation is in progress do not end up
2904 * modifying the image file. This is critical for zero-copy guest I/O
2905 * where anything might happen inside guest memory.
2906 */
2907 void *bounce_buffer;
2908
2909 BlockDriver *drv = bs->drv;
2910 struct iovec iov;
2911 QEMUIOVector bounce_qiov;
2912 int64_t cluster_sector_num;
2913 int cluster_nb_sectors;
2914 size_t skip_bytes;
2915 int ret;
2916
2917 /* Cover entire cluster so no additional backing file I/O is required when
2918 * allocating cluster in the image file.
2919 */
2920 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2921 &cluster_sector_num, &cluster_nb_sectors);
2922
2923 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2924 cluster_sector_num, cluster_nb_sectors);
2925
2926 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2927 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2928 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2929
2930 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2931 &bounce_qiov);
2932 if (ret < 0) {
2933 goto err;
2934 }
2935
2936 if (drv->bdrv_co_write_zeroes &&
2937 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2938 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2939 cluster_nb_sectors, 0);
2940 } else {
2941 /* This does not change the data on the disk, it is not necessary
2942 * to flush even in cache=writethrough mode.
2943 */
2944 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2945 &bounce_qiov);
2946 }
2947
2948 if (ret < 0) {
2949 /* It might be okay to ignore write errors for guest requests. If this
2950 * is a deliberate copy-on-read then we don't want to ignore the error.
2951 * Simply report it in all cases.
2952 */
2953 goto err;
2954 }
2955
2956 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2957 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2958 nb_sectors * BDRV_SECTOR_SIZE);
2959
2960 err:
2961 qemu_vfree(bounce_buffer);
2962 return ret;
2963 }
2964
2965 /*
2966 * Forwards an already correctly aligned request to the BlockDriver. This
2967 * handles copy on read and zeroing after EOF; any other features must be
2968 * implemented by the caller.
2969 */
2970 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
2971 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
2972 int64_t align, QEMUIOVector *qiov, int flags)
2973 {
2974 BlockDriver *drv = bs->drv;
2975 int ret;
2976
2977 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
2978 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
2979
2980 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
2981 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
2982
2983 /* Handle Copy on Read and associated serialisation */
2984 if (flags & BDRV_REQ_COPY_ON_READ) {
2985 /* If we touch the same cluster it counts as an overlap. This
2986 * guarantees that allocating writes will be serialized and not race
2987 * with each other for the same cluster. For example, in copy-on-read
2988 * it ensures that the CoR read and write operations are atomic and
2989 * guest writes cannot interleave between them. */
2990 mark_request_serialising(req, bdrv_get_cluster_size(bs));
2991 }
2992
2993 wait_serialising_requests(req);
2994
2995 if (flags & BDRV_REQ_COPY_ON_READ) {
2996 int pnum;
2997
2998 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2999 if (ret < 0) {
3000 goto out;
3001 }
3002
3003 if (!ret || pnum != nb_sectors) {
3004 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3005 goto out;
3006 }
3007 }
3008
3009 /* Forward the request to the BlockDriver */
3010 if (!(bs->zero_beyond_eof && bs->growable)) {
3011 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3012 } else {
3013 /* Read zeros after EOF of growable BDSes */
3014 int64_t len, total_sectors, max_nb_sectors;
3015
3016 len = bdrv_getlength(bs);
3017 if (len < 0) {
3018 ret = len;
3019 goto out;
3020 }
3021
3022 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3023 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3024 align >> BDRV_SECTOR_BITS);
3025 if (max_nb_sectors > 0) {
3026 ret = drv->bdrv_co_readv(bs, sector_num,
3027 MIN(nb_sectors, max_nb_sectors), qiov);
3028 } else {
3029 ret = 0;
3030 }
3031
3032 /* Reading beyond end of file is supposed to produce zeroes */
3033 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3034 uint64_t offset = MAX(0, total_sectors - sector_num);
3035 uint64_t bytes = (sector_num + nb_sectors - offset) *
3036 BDRV_SECTOR_SIZE;
3037 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3038 }
3039 }
3040
3041 out:
3042 return ret;
3043 }
3044
3045 /*
3046 * Handle a read request in coroutine context
3047 */
3048 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3049 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3050 BdrvRequestFlags flags)
3051 {
3052 BlockDriver *drv = bs->drv;
3053 BdrvTrackedRequest req;
3054
3055 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3056 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3057 uint8_t *head_buf = NULL;
3058 uint8_t *tail_buf = NULL;
3059 QEMUIOVector local_qiov;
3060 bool use_local_qiov = false;
3061 int ret;
3062
3063 if (!drv) {
3064 return -ENOMEDIUM;
3065 }
3066 if (bdrv_check_byte_request(bs, offset, bytes)) {
3067 return -EIO;
3068 }
3069
3070 if (bs->copy_on_read) {
3071 flags |= BDRV_REQ_COPY_ON_READ;
3072 }
3073
3074 /* throttling disk I/O */
3075 if (bs->io_limits_enabled) {
3076 bdrv_io_limits_intercept(bs, bytes, false);
3077 }
3078
3079 /* Align read if necessary by padding qiov */
3080 if (offset & (align - 1)) {
3081 head_buf = qemu_blockalign(bs, align);
3082 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3083 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3084 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3085 use_local_qiov = true;
3086
3087 bytes += offset & (align - 1);
3088 offset = offset & ~(align - 1);
3089 }
3090
3091 if ((offset + bytes) & (align - 1)) {
3092 if (!use_local_qiov) {
3093 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3094 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3095 use_local_qiov = true;
3096 }
3097 tail_buf = qemu_blockalign(bs, align);
3098 qemu_iovec_add(&local_qiov, tail_buf,
3099 align - ((offset + bytes) & (align - 1)));
3100
3101 bytes = ROUND_UP(bytes, align);
3102 }
3103
3104 tracked_request_begin(&req, bs, offset, bytes, false);
3105 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3106 use_local_qiov ? &local_qiov : qiov,
3107 flags);
3108 tracked_request_end(&req);
3109
3110 if (use_local_qiov) {
3111 qemu_iovec_destroy(&local_qiov);
3112 qemu_vfree(head_buf);
3113 qemu_vfree(tail_buf);
3114 }
3115
3116 return ret;
3117 }
3118
3119 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3120 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3121 BdrvRequestFlags flags)
3122 {
3123 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3124 return -EINVAL;
3125 }
3126
3127 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3128 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3129 }
3130
3131 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3132 int nb_sectors, QEMUIOVector *qiov)
3133 {
3134 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3135
3136 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3137 }
3138
3139 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3140 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3141 {
3142 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3143
3144 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3145 BDRV_REQ_COPY_ON_READ);
3146 }
3147
3148 /* if no limit is specified in the BlockLimits use a default
3149 * of 32768 512-byte sectors (16 MiB) per request.
3150 */
3151 #define MAX_WRITE_ZEROES_DEFAULT 32768
3152
3153 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3154 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3155 {
3156 BlockDriver *drv = bs->drv;
3157 QEMUIOVector qiov;
3158 struct iovec iov = {0};
3159 int ret = 0;
3160
3161 int max_write_zeroes = bs->bl.max_write_zeroes ?
3162 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3163
3164 while (nb_sectors > 0 && !ret) {
3165 int num = nb_sectors;
3166
3167 /* Align request. Block drivers can expect the "bulk" of the request
3168 * to be aligned.
3169 */
3170 if (bs->bl.write_zeroes_alignment
3171 && num > bs->bl.write_zeroes_alignment) {
3172 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3173 /* Make a small request up to the first aligned sector. */
3174 num = bs->bl.write_zeroes_alignment;
3175 num -= sector_num % bs->bl.write_zeroes_alignment;
3176 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3177 /* Shorten the request to the last aligned sector. num cannot
3178 * underflow because num > bs->bl.write_zeroes_alignment.
3179 */
3180 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3181 }
3182 }
3183
3184 /* limit request size */
3185 if (num > max_write_zeroes) {
3186 num = max_write_zeroes;
3187 }
3188
3189 ret = -ENOTSUP;
3190 /* First try the efficient write zeroes operation */
3191 if (drv->bdrv_co_write_zeroes) {
3192 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3193 }
3194
3195 if (ret == -ENOTSUP) {
3196 /* Fall back to bounce buffer if write zeroes is unsupported */
3197 iov.iov_len = num * BDRV_SECTOR_SIZE;
3198 if (iov.iov_base == NULL) {
3199 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3200 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3201 }
3202 qemu_iovec_init_external(&qiov, &iov, 1);
3203
3204 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3205
3206 /* Keep bounce buffer around if it is big enough for all
3207 * all future requests.
3208 */
3209 if (num < max_write_zeroes) {
3210 qemu_vfree(iov.iov_base);
3211 iov.iov_base = NULL;
3212 }
3213 }
3214
3215 sector_num += num;
3216 nb_sectors -= num;
3217 }
3218
3219 qemu_vfree(iov.iov_base);
3220 return ret;
3221 }
3222
3223 /*
3224 * Forwards an already correctly aligned write request to the BlockDriver.
3225 */
3226 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3227 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3228 QEMUIOVector *qiov, int flags)
3229 {
3230 BlockDriver *drv = bs->drv;
3231 bool waited;
3232 int ret;
3233
3234 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3235 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3236
3237 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3238 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3239
3240 waited = wait_serialising_requests(req);
3241 assert(!waited || !req->serialising);
3242 assert(req->overlap_offset <= offset);
3243 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3244
3245 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3246
3247 if (ret < 0) {
3248 /* Do nothing, write notifier decided to fail this request */
3249 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3250 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3251 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3252 } else {
3253 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3254 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3255 }
3256 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3257
3258 if (ret == 0 && !bs->enable_write_cache) {
3259 ret = bdrv_co_flush(bs);
3260 }
3261
3262 bdrv_set_dirty(bs, sector_num, nb_sectors);
3263
3264 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3265 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3266 }
3267 if (bs->growable && ret >= 0) {
3268 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3269 }
3270
3271 return ret;
3272 }
3273
3274 /*
3275 * Handle a write request in coroutine context
3276 */
3277 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3278 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3279 BdrvRequestFlags flags)
3280 {
3281 BdrvTrackedRequest req;
3282 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3283 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3284 uint8_t *head_buf = NULL;
3285 uint8_t *tail_buf = NULL;
3286 QEMUIOVector local_qiov;
3287 bool use_local_qiov = false;
3288 int ret;
3289
3290 if (!bs->drv) {
3291 return -ENOMEDIUM;
3292 }
3293 if (bs->read_only) {
3294 return -EACCES;
3295 }
3296 if (bdrv_check_byte_request(bs, offset, bytes)) {
3297 return -EIO;
3298 }
3299
3300 /* throttling disk I/O */
3301 if (bs->io_limits_enabled) {
3302 bdrv_io_limits_intercept(bs, bytes, true);
3303 }
3304
3305 /*
3306 * Align write if necessary by performing a read-modify-write cycle.
3307 * Pad qiov with the read parts and be sure to have a tracked request not
3308 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3309 */
3310 tracked_request_begin(&req, bs, offset, bytes, true);
3311
3312 if (offset & (align - 1)) {
3313 QEMUIOVector head_qiov;
3314 struct iovec head_iov;
3315
3316 mark_request_serialising(&req, align);
3317 wait_serialising_requests(&req);
3318
3319 head_buf = qemu_blockalign(bs, align);
3320 head_iov = (struct iovec) {
3321 .iov_base = head_buf,
3322 .iov_len = align,
3323 };
3324 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3325
3326 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3327 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3328 align, &head_qiov, 0);
3329 if (ret < 0) {
3330 goto fail;
3331 }
3332 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3333
3334 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3335 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3336 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3337 use_local_qiov = true;
3338
3339 bytes += offset & (align - 1);
3340 offset = offset & ~(align - 1);
3341 }
3342
3343 if ((offset + bytes) & (align - 1)) {
3344 QEMUIOVector tail_qiov;
3345 struct iovec tail_iov;
3346 size_t tail_bytes;
3347 bool waited;
3348
3349 mark_request_serialising(&req, align);
3350 waited = wait_serialising_requests(&req);
3351 assert(!waited || !use_local_qiov);
3352
3353 tail_buf = qemu_blockalign(bs, align);
3354 tail_iov = (struct iovec) {
3355 .iov_base = tail_buf,
3356 .iov_len = align,
3357 };
3358 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3359
3360 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3361 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3362 align, &tail_qiov, 0);
3363 if (ret < 0) {
3364 goto fail;
3365 }
3366 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3367
3368 if (!use_local_qiov) {
3369 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3370 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3371 use_local_qiov = true;
3372 }
3373
3374 tail_bytes = (offset + bytes) & (align - 1);
3375 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3376
3377 bytes = ROUND_UP(bytes, align);
3378 }
3379
3380 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3381 use_local_qiov ? &local_qiov : qiov,
3382 flags);
3383
3384 fail:
3385 tracked_request_end(&req);
3386
3387 if (use_local_qiov) {
3388 qemu_iovec_destroy(&local_qiov);
3389 }
3390 qemu_vfree(head_buf);
3391 qemu_vfree(tail_buf);
3392
3393 return ret;
3394 }
3395
3396 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3397 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3398 BdrvRequestFlags flags)
3399 {
3400 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3401 return -EINVAL;
3402 }
3403
3404 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3405 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3406 }
3407
3408 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3409 int nb_sectors, QEMUIOVector *qiov)
3410 {
3411 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3412
3413 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3414 }
3415
3416 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3417 int64_t sector_num, int nb_sectors,
3418 BdrvRequestFlags flags)
3419 {
3420 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3421
3422 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3423 flags &= ~BDRV_REQ_MAY_UNMAP;
3424 }
3425
3426 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3427 BDRV_REQ_ZERO_WRITE | flags);
3428 }
3429
3430 /**
3431 * Truncate file to 'offset' bytes (needed only for file protocols)
3432 */
3433 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3434 {
3435 BlockDriver *drv = bs->drv;
3436 int ret;
3437 if (!drv)
3438 return -ENOMEDIUM;
3439 if (!drv->bdrv_truncate)
3440 return -ENOTSUP;
3441 if (bs->read_only)
3442 return -EACCES;
3443 if (bdrv_in_use(bs))
3444 return -EBUSY;
3445 ret = drv->bdrv_truncate(bs, offset);
3446 if (ret == 0) {
3447 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3448 bdrv_dev_resize_cb(bs);
3449 }
3450 return ret;
3451 }
3452
3453 /**
3454 * Length of a allocated file in bytes. Sparse files are counted by actual
3455 * allocated space. Return < 0 if error or unknown.
3456 */
3457 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3458 {
3459 BlockDriver *drv = bs->drv;
3460 if (!drv) {
3461 return -ENOMEDIUM;
3462 }
3463 if (drv->bdrv_get_allocated_file_size) {
3464 return drv->bdrv_get_allocated_file_size(bs);
3465 }
3466 if (bs->file) {
3467 return bdrv_get_allocated_file_size(bs->file);
3468 }
3469 return -ENOTSUP;
3470 }
3471
3472 /**
3473 * Length of a file in bytes. Return < 0 if error or unknown.
3474 */
3475 int64_t bdrv_getlength(BlockDriverState *bs)
3476 {
3477 BlockDriver *drv = bs->drv;
3478 if (!drv)
3479 return -ENOMEDIUM;
3480
3481 if (drv->has_variable_length) {
3482 int ret = refresh_total_sectors(bs, bs->total_sectors);
3483 if (ret < 0) {
3484 return ret;
3485 }
3486 }
3487 return bs->total_sectors * BDRV_SECTOR_SIZE;
3488 }
3489
3490 /* return 0 as number of sectors if no device present or error */
3491 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3492 {
3493 int64_t length;
3494 length = bdrv_getlength(bs);
3495 if (length < 0)
3496 length = 0;
3497 else
3498 length = length >> BDRV_SECTOR_BITS;
3499 *nb_sectors_ptr = length;
3500 }
3501
3502 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3503 BlockdevOnError on_write_error)
3504 {
3505 bs->on_read_error = on_read_error;
3506 bs->on_write_error = on_write_error;
3507 }
3508
3509 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3510 {
3511 return is_read ? bs->on_read_error : bs->on_write_error;
3512 }
3513
3514 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3515 {
3516 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3517
3518 switch (on_err) {
3519 case BLOCKDEV_ON_ERROR_ENOSPC:
3520 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
3521 case BLOCKDEV_ON_ERROR_STOP:
3522 return BDRV_ACTION_STOP;
3523 case BLOCKDEV_ON_ERROR_REPORT:
3524 return BDRV_ACTION_REPORT;
3525 case BLOCKDEV_ON_ERROR_IGNORE:
3526 return BDRV_ACTION_IGNORE;
3527 default:
3528 abort();
3529 }
3530 }
3531
3532 /* This is done by device models because, while the block layer knows
3533 * about the error, it does not know whether an operation comes from
3534 * the device or the block layer (from a job, for example).
3535 */
3536 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3537 bool is_read, int error)
3538 {
3539 assert(error >= 0);
3540 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3541 if (action == BDRV_ACTION_STOP) {
3542 vm_stop(RUN_STATE_IO_ERROR);
3543 bdrv_iostatus_set_err(bs, error);
3544 }
3545 }
3546
3547 int bdrv_is_read_only(BlockDriverState *bs)
3548 {
3549 return bs->read_only;
3550 }
3551
3552 int bdrv_is_sg(BlockDriverState *bs)
3553 {
3554 return bs->sg;
3555 }
3556
3557 int bdrv_enable_write_cache(BlockDriverState *bs)
3558 {
3559 return bs->enable_write_cache;
3560 }
3561
3562 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3563 {
3564 bs->enable_write_cache = wce;
3565
3566 /* so a reopen() will preserve wce */
3567 if (wce) {
3568 bs->open_flags |= BDRV_O_CACHE_WB;
3569 } else {
3570 bs->open_flags &= ~BDRV_O_CACHE_WB;
3571 }
3572 }
3573
3574 int bdrv_is_encrypted(BlockDriverState *bs)
3575 {
3576 if (bs->backing_hd && bs->backing_hd->encrypted)
3577 return 1;
3578 return bs->encrypted;
3579 }
3580
3581 int bdrv_key_required(BlockDriverState *bs)
3582 {
3583 BlockDriverState *backing_hd = bs->backing_hd;
3584
3585 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3586 return 1;
3587 return (bs->encrypted && !bs->valid_key);
3588 }
3589
3590 int bdrv_set_key(BlockDriverState *bs, const char *key)
3591 {
3592 int ret;
3593 if (bs->backing_hd && bs->backing_hd->encrypted) {
3594 ret = bdrv_set_key(bs->backing_hd, key);
3595 if (ret < 0)
3596 return ret;
3597 if (!bs->encrypted)
3598 return 0;
3599 }
3600 if (!bs->encrypted) {
3601 return -EINVAL;
3602 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3603 return -ENOMEDIUM;
3604 }
3605 ret = bs->drv->bdrv_set_key(bs, key);
3606 if (ret < 0) {
3607 bs->valid_key = 0;
3608 } else if (!bs->valid_key) {
3609 bs->valid_key = 1;
3610 /* call the change callback now, we skipped it on open */
3611 bdrv_dev_change_media_cb(bs, true);
3612 }
3613 return ret;
3614 }
3615
3616 const char *bdrv_get_format_name(BlockDriverState *bs)
3617 {
3618 return bs->drv ? bs->drv->format_name : NULL;
3619 }
3620
3621 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3622 void *opaque)
3623 {
3624 BlockDriver *drv;
3625 int count = 0;
3626 const char **formats = NULL;
3627
3628 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3629 if (drv->format_name) {
3630 bool found = false;
3631 int i = count;
3632 while (formats && i && !found) {
3633 found = !strcmp(formats[--i], drv->format_name);
3634 }
3635
3636 if (!found) {
3637 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3638 formats[count++] = drv->format_name;
3639 it(opaque, drv->format_name);
3640 }
3641 }
3642 }
3643 g_free(formats);
3644 }
3645
3646 /* This function is to find block backend bs */
3647 BlockDriverState *bdrv_find(const char *name)
3648 {
3649 BlockDriverState *bs;
3650
3651 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3652 if (!strcmp(name, bs->device_name)) {
3653 return bs;
3654 }
3655 }
3656 return NULL;
3657 }
3658
3659 /* This function is to find a node in the bs graph */
3660 BlockDriverState *bdrv_find_node(const char *node_name)
3661 {
3662 BlockDriverState *bs;
3663
3664 assert(node_name);
3665
3666 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3667 if (!strcmp(node_name, bs->node_name)) {
3668 return bs;
3669 }
3670 }
3671 return NULL;
3672 }
3673
3674 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3675 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3676 {
3677 BlockDeviceInfoList *list, *entry;
3678 BlockDriverState *bs;
3679
3680 list = NULL;
3681 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3682 entry = g_malloc0(sizeof(*entry));
3683 entry->value = bdrv_block_device_info(bs);
3684 entry->next = list;
3685 list = entry;
3686 }
3687
3688 return list;
3689 }
3690
3691 BlockDriverState *bdrv_lookup_bs(const char *device,
3692 const char *node_name,
3693 Error **errp)
3694 {
3695 BlockDriverState *bs = NULL;
3696
3697 if (device) {
3698 bs = bdrv_find(device);
3699
3700 if (bs) {
3701 return bs;
3702 }
3703 }
3704
3705 if (node_name) {
3706 bs = bdrv_find_node(node_name);
3707
3708 if (bs) {
3709 return bs;
3710 }
3711 }
3712
3713 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3714 device ? device : "",
3715 node_name ? node_name : "");
3716 return NULL;
3717 }
3718
3719 BlockDriverState *bdrv_next(BlockDriverState *bs)
3720 {
3721 if (!bs) {
3722 return QTAILQ_FIRST(&bdrv_states);
3723 }
3724 return QTAILQ_NEXT(bs, device_list);
3725 }
3726
3727 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3728 {
3729 BlockDriverState *bs;
3730
3731 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3732 it(opaque, bs);
3733 }
3734 }
3735
3736 const char *bdrv_get_device_name(BlockDriverState *bs)
3737 {
3738 return bs->device_name;
3739 }
3740
3741 int bdrv_get_flags(BlockDriverState *bs)
3742 {
3743 return bs->open_flags;
3744 }
3745
3746 int bdrv_flush_all(void)
3747 {
3748 BlockDriverState *bs;
3749 int result = 0;
3750
3751 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3752 int ret = bdrv_flush(bs);
3753 if (ret < 0 && !result) {
3754 result = ret;
3755 }
3756 }
3757
3758 return result;
3759 }
3760
3761 int bdrv_has_zero_init_1(BlockDriverState *bs)
3762 {
3763 return 1;
3764 }
3765
3766 int bdrv_has_zero_init(BlockDriverState *bs)
3767 {
3768 assert(bs->drv);
3769
3770 /* If BS is a copy on write image, it is initialized to
3771 the contents of the base image, which may not be zeroes. */
3772 if (bs->backing_hd) {
3773 return 0;
3774 }
3775 if (bs->drv->bdrv_has_zero_init) {
3776 return bs->drv->bdrv_has_zero_init(bs);
3777 }
3778
3779 /* safe default */
3780 return 0;
3781 }
3782
3783 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3784 {
3785 BlockDriverInfo bdi;
3786
3787 if (bs->backing_hd) {
3788 return false;
3789 }
3790
3791 if (bdrv_get_info(bs, &bdi) == 0) {
3792 return bdi.unallocated_blocks_are_zero;
3793 }
3794
3795 return false;
3796 }
3797
3798 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3799 {
3800 BlockDriverInfo bdi;
3801
3802 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3803 return false;
3804 }
3805
3806 if (bdrv_get_info(bs, &bdi) == 0) {
3807 return bdi.can_write_zeroes_with_unmap;
3808 }
3809
3810 return false;
3811 }
3812
3813 typedef struct BdrvCoGetBlockStatusData {
3814 BlockDriverState *bs;
3815 BlockDriverState *base;
3816 int64_t sector_num;
3817 int nb_sectors;
3818 int *pnum;
3819 int64_t ret;
3820 bool done;
3821 } BdrvCoGetBlockStatusData;
3822
3823 /*
3824 * Returns true iff the specified sector is present in the disk image. Drivers
3825 * not implementing the functionality are assumed to not support backing files,
3826 * hence all their sectors are reported as allocated.
3827 *
3828 * If 'sector_num' is beyond the end of the disk image the return value is 0
3829 * and 'pnum' is set to 0.
3830 *
3831 * 'pnum' is set to the number of sectors (including and immediately following
3832 * the specified sector) that are known to be in the same
3833 * allocated/unallocated state.
3834 *
3835 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3836 * beyond the end of the disk image it will be clamped.
3837 */
3838 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3839 int64_t sector_num,
3840 int nb_sectors, int *pnum)
3841 {
3842 int64_t length;
3843 int64_t n;
3844 int64_t ret, ret2;
3845
3846 length = bdrv_getlength(bs);
3847 if (length < 0) {
3848 return length;
3849 }
3850
3851 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3852 *pnum = 0;
3853 return 0;
3854 }
3855
3856 n = bs->total_sectors - sector_num;
3857 if (n < nb_sectors) {
3858 nb_sectors = n;
3859 }
3860
3861 if (!bs->drv->bdrv_co_get_block_status) {
3862 *pnum = nb_sectors;
3863 ret = BDRV_BLOCK_DATA;
3864 if (bs->drv->protocol_name) {
3865 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3866 }
3867 return ret;
3868 }
3869
3870 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3871 if (ret < 0) {
3872 *pnum = 0;
3873 return ret;
3874 }
3875
3876 if (ret & BDRV_BLOCK_RAW) {
3877 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3878 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3879 *pnum, pnum);
3880 }
3881
3882 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3883 if (bdrv_unallocated_blocks_are_zero(bs)) {
3884 ret |= BDRV_BLOCK_ZERO;
3885 } else if (bs->backing_hd) {
3886 BlockDriverState *bs2 = bs->backing_hd;
3887 int64_t length2 = bdrv_getlength(bs2);
3888 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3889 ret |= BDRV_BLOCK_ZERO;
3890 }
3891 }
3892 }
3893
3894 if (bs->file &&
3895 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3896 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3897 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3898 *pnum, pnum);
3899 if (ret2 >= 0) {
3900 /* Ignore errors. This is just providing extra information, it
3901 * is useful but not necessary.
3902 */
3903 ret |= (ret2 & BDRV_BLOCK_ZERO);
3904 }
3905 }
3906
3907 return ret;
3908 }
3909
3910 /* Coroutine wrapper for bdrv_get_block_status() */
3911 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3912 {
3913 BdrvCoGetBlockStatusData *data = opaque;
3914 BlockDriverState *bs = data->bs;
3915
3916 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3917 data->pnum);
3918 data->done = true;
3919 }
3920
3921 /*
3922 * Synchronous wrapper around bdrv_co_get_block_status().
3923 *
3924 * See bdrv_co_get_block_status() for details.
3925 */
3926 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3927 int nb_sectors, int *pnum)
3928 {
3929 Coroutine *co;
3930 BdrvCoGetBlockStatusData data = {
3931 .bs = bs,
3932 .sector_num = sector_num,
3933 .nb_sectors = nb_sectors,
3934 .pnum = pnum,
3935 .done = false,
3936 };
3937
3938 if (qemu_in_coroutine()) {
3939 /* Fast-path if already in coroutine context */
3940 bdrv_get_block_status_co_entry(&data);
3941 } else {
3942 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3943 qemu_coroutine_enter(co, &data);
3944 while (!data.done) {
3945 qemu_aio_wait();
3946 }
3947 }
3948 return data.ret;
3949 }
3950
3951 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3952 int nb_sectors, int *pnum)
3953 {
3954 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3955 if (ret < 0) {
3956 return ret;
3957 }
3958 return
3959 (ret & BDRV_BLOCK_DATA) ||
3960 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3961 }
3962
3963 /*
3964 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3965 *
3966 * Return true if the given sector is allocated in any image between
3967 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3968 * sector is allocated in any image of the chain. Return false otherwise.
3969 *
3970 * 'pnum' is set to the number of sectors (including and immediately following
3971 * the specified sector) that are known to be in the same
3972 * allocated/unallocated state.
3973 *
3974 */
3975 int bdrv_is_allocated_above(BlockDriverState *top,
3976 BlockDriverState *base,
3977 int64_t sector_num,
3978 int nb_sectors, int *pnum)
3979 {
3980 BlockDriverState *intermediate;
3981 int ret, n = nb_sectors;
3982
3983 intermediate = top;
3984 while (intermediate && intermediate != base) {
3985 int pnum_inter;
3986 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3987 &pnum_inter);
3988 if (ret < 0) {
3989 return ret;
3990 } else if (ret) {
3991 *pnum = pnum_inter;
3992 return 1;
3993 }
3994
3995 /*
3996 * [sector_num, nb_sectors] is unallocated on top but intermediate
3997 * might have
3998 *
3999 * [sector_num+x, nr_sectors] allocated.
4000 */
4001 if (n > pnum_inter &&
4002 (intermediate == top ||
4003 sector_num + pnum_inter < intermediate->total_sectors)) {
4004 n = pnum_inter;
4005 }
4006
4007 intermediate = intermediate->backing_hd;
4008 }
4009
4010 *pnum = n;
4011 return 0;
4012 }
4013
4014 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4015 {
4016 if (bs->backing_hd && bs->backing_hd->encrypted)
4017 return bs->backing_file;
4018 else if (bs->encrypted)
4019 return bs->filename;
4020 else
4021 return NULL;
4022 }
4023
4024 void bdrv_get_backing_filename(BlockDriverState *bs,
4025 char *filename, int filename_size)
4026 {
4027 pstrcpy(filename, filename_size, bs->backing_file);
4028 }
4029
4030 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4031 const uint8_t *buf, int nb_sectors)
4032 {
4033 BlockDriver *drv = bs->drv;
4034 if (!drv)
4035 return -ENOMEDIUM;
4036 if (!drv->bdrv_write_compressed)
4037 return -ENOTSUP;
4038 if (bdrv_check_request(bs, sector_num, nb_sectors))
4039 return -EIO;
4040
4041 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4042
4043 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4044 }
4045
4046 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4047 {
4048 BlockDriver *drv = bs->drv;
4049 if (!drv)
4050 return -ENOMEDIUM;
4051 if (!drv->bdrv_get_info)
4052 return -ENOTSUP;
4053 memset(bdi, 0, sizeof(*bdi));
4054 return drv->bdrv_get_info(bs, bdi);
4055 }
4056
4057 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4058 {
4059 BlockDriver *drv = bs->drv;
4060 if (drv && drv->bdrv_get_specific_info) {
4061 return drv->bdrv_get_specific_info(bs);
4062 }
4063 return NULL;
4064 }
4065
4066 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4067 int64_t pos, int size)
4068 {
4069 QEMUIOVector qiov;
4070 struct iovec iov = {
4071 .iov_base = (void *) buf,
4072 .iov_len = size,
4073 };
4074
4075 qemu_iovec_init_external(&qiov, &iov, 1);
4076 return bdrv_writev_vmstate(bs, &qiov, pos);
4077 }
4078
4079 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4080 {
4081 BlockDriver *drv = bs->drv;
4082
4083 if (!drv) {
4084 return -ENOMEDIUM;
4085 } else if (drv->bdrv_save_vmstate) {
4086 return drv->bdrv_save_vmstate(bs, qiov, pos);
4087 } else if (bs->file) {
4088 return bdrv_writev_vmstate(bs->file, qiov, pos);
4089 }
4090
4091 return -ENOTSUP;
4092 }
4093
4094 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4095 int64_t pos, int size)
4096 {
4097 BlockDriver *drv = bs->drv;
4098 if (!drv)
4099 return -ENOMEDIUM;
4100 if (drv->bdrv_load_vmstate)
4101 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4102 if (bs->file)
4103 return bdrv_load_vmstate(bs->file, buf, pos, size);
4104 return -ENOTSUP;
4105 }
4106
4107 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4108 {
4109 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4110 return;
4111 }
4112
4113 bs->drv->bdrv_debug_event(bs, event);
4114 }
4115
4116 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4117 const char *tag)
4118 {
4119 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4120 bs = bs->file;
4121 }
4122
4123 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4124 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4125 }
4126
4127 return -ENOTSUP;
4128 }
4129
4130 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4131 {
4132 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4133 bs = bs->file;
4134 }
4135
4136 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4137 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4138 }
4139
4140 return -ENOTSUP;
4141 }
4142
4143 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4144 {
4145 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4146 bs = bs->file;
4147 }
4148
4149 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4150 return bs->drv->bdrv_debug_resume(bs, tag);
4151 }
4152
4153 return -ENOTSUP;
4154 }
4155
4156 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4157 {
4158 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4159 bs = bs->file;
4160 }
4161
4162 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4163 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4164 }
4165
4166 return false;
4167 }
4168
4169 int bdrv_is_snapshot(BlockDriverState *bs)
4170 {
4171 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4172 }
4173
4174 /* backing_file can either be relative, or absolute, or a protocol. If it is
4175 * relative, it must be relative to the chain. So, passing in bs->filename
4176 * from a BDS as backing_file should not be done, as that may be relative to
4177 * the CWD rather than the chain. */
4178 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4179 const char *backing_file)
4180 {
4181 char *filename_full = NULL;
4182 char *backing_file_full = NULL;
4183 char *filename_tmp = NULL;
4184 int is_protocol = 0;
4185 BlockDriverState *curr_bs = NULL;
4186 BlockDriverState *retval = NULL;
4187
4188 if (!bs || !bs->drv || !backing_file) {
4189 return NULL;
4190 }
4191
4192 filename_full = g_malloc(PATH_MAX);
4193 backing_file_full = g_malloc(PATH_MAX);
4194 filename_tmp = g_malloc(PATH_MAX);
4195
4196 is_protocol = path_has_protocol(backing_file);
4197
4198 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4199
4200 /* If either of the filename paths is actually a protocol, then
4201 * compare unmodified paths; otherwise make paths relative */
4202 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4203 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4204 retval = curr_bs->backing_hd;
4205 break;
4206 }
4207 } else {
4208 /* If not an absolute filename path, make it relative to the current
4209 * image's filename path */
4210 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4211 backing_file);
4212
4213 /* We are going to compare absolute pathnames */
4214 if (!realpath(filename_tmp, filename_full)) {
4215 continue;
4216 }
4217
4218 /* We need to make sure the backing filename we are comparing against
4219 * is relative to the current image filename (or absolute) */
4220 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4221 curr_bs->backing_file);
4222
4223 if (!realpath(filename_tmp, backing_file_full)) {
4224 continue;
4225 }
4226
4227 if (strcmp(backing_file_full, filename_full) == 0) {
4228 retval = curr_bs->backing_hd;
4229 break;
4230 }
4231 }
4232 }
4233
4234 g_free(filename_full);
4235 g_free(backing_file_full);
4236 g_free(filename_tmp);
4237 return retval;
4238 }
4239
4240 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4241 {
4242 if (!bs->drv) {
4243 return 0;
4244 }
4245
4246 if (!bs->backing_hd) {
4247 return 0;
4248 }
4249
4250 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4251 }
4252
4253 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4254 {
4255 BlockDriverState *curr_bs = NULL;
4256
4257 if (!bs) {
4258 return NULL;
4259 }
4260
4261 curr_bs = bs;
4262
4263 while (curr_bs->backing_hd) {
4264 curr_bs = curr_bs->backing_hd;
4265 }
4266 return curr_bs;
4267 }
4268
4269 /**************************************************************/
4270 /* async I/Os */
4271
4272 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4273 QEMUIOVector *qiov, int nb_sectors,
4274 BlockDriverCompletionFunc *cb, void *opaque)
4275 {
4276 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4277
4278 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4279 cb, opaque, false);
4280 }
4281
4282 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4283 QEMUIOVector *qiov, int nb_sectors,
4284 BlockDriverCompletionFunc *cb, void *opaque)
4285 {
4286 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4287
4288 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4289 cb, opaque, true);
4290 }
4291
4292 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4293 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4294 BlockDriverCompletionFunc *cb, void *opaque)
4295 {
4296 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4297
4298 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4299 BDRV_REQ_ZERO_WRITE | flags,
4300 cb, opaque, true);
4301 }
4302
4303
4304 typedef struct MultiwriteCB {
4305 int error;
4306 int num_requests;
4307 int num_callbacks;
4308 struct {
4309 BlockDriverCompletionFunc *cb;
4310 void *opaque;
4311 QEMUIOVector *free_qiov;
4312 } callbacks[];
4313 } MultiwriteCB;
4314
4315 static void multiwrite_user_cb(MultiwriteCB *mcb)
4316 {
4317 int i;
4318
4319 for (i = 0; i < mcb->num_callbacks; i++) {
4320 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4321 if (mcb->callbacks[i].free_qiov) {
4322 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4323 }
4324 g_free(mcb->callbacks[i].free_qiov);
4325 }
4326 }
4327
4328 static void multiwrite_cb(void *opaque, int ret)
4329 {
4330 MultiwriteCB *mcb = opaque;
4331
4332 trace_multiwrite_cb(mcb, ret);
4333
4334 if (ret < 0 && !mcb->error) {
4335 mcb->error = ret;
4336 }
4337
4338 mcb->num_requests--;
4339 if (mcb->num_requests == 0) {
4340 multiwrite_user_cb(mcb);
4341 g_free(mcb);
4342 }
4343 }
4344
4345 static int multiwrite_req_compare(const void *a, const void *b)
4346 {
4347 const BlockRequest *req1 = a, *req2 = b;
4348
4349 /*
4350 * Note that we can't simply subtract req2->sector from req1->sector
4351 * here as that could overflow the return value.
4352 */
4353 if (req1->sector > req2->sector) {
4354 return 1;
4355 } else if (req1->sector < req2->sector) {
4356 return -1;
4357 } else {
4358 return 0;
4359 }
4360 }
4361
4362 /*
4363 * Takes a bunch of requests and tries to merge them. Returns the number of
4364 * requests that remain after merging.
4365 */
4366 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4367 int num_reqs, MultiwriteCB *mcb)
4368 {
4369 int i, outidx;
4370
4371 // Sort requests by start sector
4372 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4373
4374 // Check if adjacent requests touch the same clusters. If so, combine them,
4375 // filling up gaps with zero sectors.
4376 outidx = 0;
4377 for (i = 1; i < num_reqs; i++) {
4378 int merge = 0;
4379 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4380
4381 // Handle exactly sequential writes and overlapping writes.
4382 if (reqs[i].sector <= oldreq_last) {
4383 merge = 1;
4384 }
4385
4386 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4387 merge = 0;
4388 }
4389
4390 if (merge) {
4391 size_t size;
4392 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4393 qemu_iovec_init(qiov,
4394 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4395
4396 // Add the first request to the merged one. If the requests are
4397 // overlapping, drop the last sectors of the first request.
4398 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4399 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4400
4401 // We should need to add any zeros between the two requests
4402 assert (reqs[i].sector <= oldreq_last);
4403
4404 // Add the second request
4405 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4406
4407 reqs[outidx].nb_sectors = qiov->size >> 9;
4408 reqs[outidx].qiov = qiov;
4409
4410 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4411 } else {
4412 outidx++;
4413 reqs[outidx].sector = reqs[i].sector;
4414 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4415 reqs[outidx].qiov = reqs[i].qiov;
4416 }
4417 }
4418
4419 return outidx + 1;
4420 }
4421
4422 /*
4423 * Submit multiple AIO write requests at once.
4424 *
4425 * On success, the function returns 0 and all requests in the reqs array have
4426 * been submitted. In error case this function returns -1, and any of the
4427 * requests may or may not be submitted yet. In particular, this means that the
4428 * callback will be called for some of the requests, for others it won't. The
4429 * caller must check the error field of the BlockRequest to wait for the right
4430 * callbacks (if error != 0, no callback will be called).
4431 *
4432 * The implementation may modify the contents of the reqs array, e.g. to merge
4433 * requests. However, the fields opaque and error are left unmodified as they
4434 * are used to signal failure for a single request to the caller.
4435 */
4436 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4437 {
4438 MultiwriteCB *mcb;
4439 int i;
4440
4441 /* don't submit writes if we don't have a medium */
4442 if (bs->drv == NULL) {
4443 for (i = 0; i < num_reqs; i++) {
4444 reqs[i].error = -ENOMEDIUM;
4445 }
4446 return -1;
4447 }
4448
4449 if (num_reqs == 0) {
4450 return 0;
4451 }
4452
4453 // Create MultiwriteCB structure
4454 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4455 mcb->num_requests = 0;
4456 mcb->num_callbacks = num_reqs;
4457
4458 for (i = 0; i < num_reqs; i++) {
4459 mcb->callbacks[i].cb = reqs[i].cb;
4460 mcb->callbacks[i].opaque = reqs[i].opaque;
4461 }
4462
4463 // Check for mergable requests
4464 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4465
4466 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4467
4468 /* Run the aio requests. */
4469 mcb->num_requests = num_reqs;
4470 for (i = 0; i < num_reqs; i++) {
4471 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4472 reqs[i].nb_sectors, reqs[i].flags,
4473 multiwrite_cb, mcb,
4474 true);
4475 }
4476
4477 return 0;
4478 }
4479
4480 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4481 {
4482 acb->aiocb_info->cancel(acb);
4483 }
4484
4485 /**************************************************************/
4486 /* async block device emulation */
4487
4488 typedef struct BlockDriverAIOCBSync {
4489 BlockDriverAIOCB common;
4490 QEMUBH *bh;
4491 int ret;
4492 /* vector translation state */
4493 QEMUIOVector *qiov;
4494 uint8_t *bounce;
4495 int is_write;
4496 } BlockDriverAIOCBSync;
4497
4498 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4499 {
4500 BlockDriverAIOCBSync *acb =
4501 container_of(blockacb, BlockDriverAIOCBSync, common);
4502 qemu_bh_delete(acb->bh);
4503 acb->bh = NULL;
4504 qemu_aio_release(acb);
4505 }
4506
4507 static const AIOCBInfo bdrv_em_aiocb_info = {
4508 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4509 .cancel = bdrv_aio_cancel_em,
4510 };
4511
4512 static void bdrv_aio_bh_cb(void *opaque)
4513 {
4514 BlockDriverAIOCBSync *acb = opaque;
4515
4516 if (!acb->is_write)
4517 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4518 qemu_vfree(acb->bounce);
4519 acb->common.cb(acb->common.opaque, acb->ret);
4520 qemu_bh_delete(acb->bh);
4521 acb->bh = NULL;
4522 qemu_aio_release(acb);
4523 }
4524
4525 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4526 int64_t sector_num,
4527 QEMUIOVector *qiov,
4528 int nb_sectors,
4529 BlockDriverCompletionFunc *cb,
4530 void *opaque,
4531 int is_write)
4532
4533 {
4534 BlockDriverAIOCBSync *acb;
4535
4536 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4537 acb->is_write = is_write;
4538 acb->qiov = qiov;
4539 acb->bounce = qemu_blockalign(bs, qiov->size);
4540 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
4541
4542 if (is_write) {
4543 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4544 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4545 } else {
4546 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4547 }
4548
4549 qemu_bh_schedule(acb->bh);
4550
4551 return &acb->common;
4552 }
4553
4554 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4555 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4556 BlockDriverCompletionFunc *cb, void *opaque)
4557 {
4558 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4559 }
4560
4561 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4562 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4563 BlockDriverCompletionFunc *cb, void *opaque)
4564 {
4565 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4566 }
4567
4568
4569 typedef struct BlockDriverAIOCBCoroutine {
4570 BlockDriverAIOCB common;
4571 BlockRequest req;
4572 bool is_write;
4573 bool *done;
4574 QEMUBH* bh;
4575 } BlockDriverAIOCBCoroutine;
4576
4577 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4578 {
4579 BlockDriverAIOCBCoroutine *acb =
4580 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4581 bool done = false;
4582
4583 acb->done = &done;
4584 while (!done) {
4585 qemu_aio_wait();
4586 }
4587 }
4588
4589 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4590 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4591 .cancel = bdrv_aio_co_cancel_em,
4592 };
4593
4594 static void bdrv_co_em_bh(void *opaque)
4595 {
4596 BlockDriverAIOCBCoroutine *acb = opaque;
4597
4598 acb->common.cb(acb->common.opaque, acb->req.error);
4599
4600 if (acb->done) {
4601 *acb->done = true;
4602 }
4603
4604 qemu_bh_delete(acb->bh);
4605 qemu_aio_release(acb);
4606 }
4607
4608 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4609 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4610 {
4611 BlockDriverAIOCBCoroutine *acb = opaque;
4612 BlockDriverState *bs = acb->common.bs;
4613
4614 if (!acb->is_write) {
4615 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4616 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4617 } else {
4618 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4619 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4620 }
4621
4622 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4623 qemu_bh_schedule(acb->bh);
4624 }
4625
4626 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4627 int64_t sector_num,
4628 QEMUIOVector *qiov,
4629 int nb_sectors,
4630 BdrvRequestFlags flags,
4631 BlockDriverCompletionFunc *cb,
4632 void *opaque,
4633 bool is_write)
4634 {
4635 Coroutine *co;
4636 BlockDriverAIOCBCoroutine *acb;
4637
4638 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4639 acb->req.sector = sector_num;
4640 acb->req.nb_sectors = nb_sectors;
4641 acb->req.qiov = qiov;
4642 acb->req.flags = flags;
4643 acb->is_write = is_write;
4644 acb->done = NULL;
4645
4646 co = qemu_coroutine_create(bdrv_co_do_rw);
4647 qemu_coroutine_enter(co, acb);
4648
4649 return &acb->common;
4650 }
4651
4652 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4653 {
4654 BlockDriverAIOCBCoroutine *acb = opaque;
4655 BlockDriverState *bs = acb->common.bs;
4656
4657 acb->req.error = bdrv_co_flush(bs);
4658 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4659 qemu_bh_schedule(acb->bh);
4660 }
4661
4662 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4663 BlockDriverCompletionFunc *cb, void *opaque)
4664 {
4665 trace_bdrv_aio_flush(bs, opaque);
4666
4667 Coroutine *co;
4668 BlockDriverAIOCBCoroutine *acb;
4669
4670 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4671 acb->done = NULL;
4672
4673 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4674 qemu_coroutine_enter(co, acb);
4675
4676 return &acb->common;
4677 }
4678
4679 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4680 {
4681 BlockDriverAIOCBCoroutine *acb = opaque;
4682 BlockDriverState *bs = acb->common.bs;
4683
4684 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4685 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4686 qemu_bh_schedule(acb->bh);
4687 }
4688
4689 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4690 int64_t sector_num, int nb_sectors,
4691 BlockDriverCompletionFunc *cb, void *opaque)
4692 {
4693 Coroutine *co;
4694 BlockDriverAIOCBCoroutine *acb;
4695
4696 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4697
4698 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4699 acb->req.sector = sector_num;
4700 acb->req.nb_sectors = nb_sectors;
4701 acb->done = NULL;
4702 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4703 qemu_coroutine_enter(co, acb);
4704
4705 return &acb->common;
4706 }
4707
4708 void bdrv_init(void)
4709 {
4710 module_call_init(MODULE_INIT_BLOCK);
4711 }
4712
4713 void bdrv_init_with_whitelist(void)
4714 {
4715 use_bdrv_whitelist = 1;
4716 bdrv_init();
4717 }
4718
4719 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4720 BlockDriverCompletionFunc *cb, void *opaque)
4721 {
4722 BlockDriverAIOCB *acb;
4723
4724 acb = g_slice_alloc(aiocb_info->aiocb_size);
4725 acb->aiocb_info = aiocb_info;
4726 acb->bs = bs;
4727 acb->cb = cb;
4728 acb->opaque = opaque;
4729 return acb;
4730 }
4731
4732 void qemu_aio_release(void *p)
4733 {
4734 BlockDriverAIOCB *acb = p;
4735 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4736 }
4737
4738 /**************************************************************/
4739 /* Coroutine block device emulation */
4740
4741 typedef struct CoroutineIOCompletion {
4742 Coroutine *coroutine;
4743 int ret;
4744 } CoroutineIOCompletion;
4745
4746 static void bdrv_co_io_em_complete(void *opaque, int ret)
4747 {
4748 CoroutineIOCompletion *co = opaque;
4749
4750 co->ret = ret;
4751 qemu_coroutine_enter(co->coroutine, NULL);
4752 }
4753
4754 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4755 int nb_sectors, QEMUIOVector *iov,
4756 bool is_write)
4757 {
4758 CoroutineIOCompletion co = {
4759 .coroutine = qemu_coroutine_self(),
4760 };
4761 BlockDriverAIOCB *acb;
4762
4763 if (is_write) {
4764 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4765 bdrv_co_io_em_complete, &co);
4766 } else {
4767 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4768 bdrv_co_io_em_complete, &co);
4769 }
4770
4771 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4772 if (!acb) {
4773 return -EIO;
4774 }
4775 qemu_coroutine_yield();
4776
4777 return co.ret;
4778 }
4779
4780 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4781 int64_t sector_num, int nb_sectors,
4782 QEMUIOVector *iov)
4783 {
4784 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4785 }
4786
4787 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4788 int64_t sector_num, int nb_sectors,
4789 QEMUIOVector *iov)
4790 {
4791 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4792 }
4793
4794 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4795 {
4796 RwCo *rwco = opaque;
4797
4798 rwco->ret = bdrv_co_flush(rwco->bs);
4799 }
4800
4801 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4802 {
4803 int ret;
4804
4805 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4806 return 0;
4807 }
4808
4809 /* Write back cached data to the OS even with cache=unsafe */
4810 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4811 if (bs->drv->bdrv_co_flush_to_os) {
4812 ret = bs->drv->bdrv_co_flush_to_os(bs);
4813 if (ret < 0) {
4814 return ret;
4815 }
4816 }
4817
4818 /* But don't actually force it to the disk with cache=unsafe */
4819 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4820 goto flush_parent;
4821 }
4822
4823 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4824 if (bs->drv->bdrv_co_flush_to_disk) {
4825 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4826 } else if (bs->drv->bdrv_aio_flush) {
4827 BlockDriverAIOCB *acb;
4828 CoroutineIOCompletion co = {
4829 .coroutine = qemu_coroutine_self(),
4830 };
4831
4832 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4833 if (acb == NULL) {
4834 ret = -EIO;
4835 } else {
4836 qemu_coroutine_yield();
4837 ret = co.ret;
4838 }
4839 } else {
4840 /*
4841 * Some block drivers always operate in either writethrough or unsafe
4842 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4843 * know how the server works (because the behaviour is hardcoded or
4844 * depends on server-side configuration), so we can't ensure that
4845 * everything is safe on disk. Returning an error doesn't work because
4846 * that would break guests even if the server operates in writethrough
4847 * mode.
4848 *
4849 * Let's hope the user knows what he's doing.
4850 */
4851 ret = 0;
4852 }
4853 if (ret < 0) {
4854 return ret;
4855 }
4856
4857 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4858 * in the case of cache=unsafe, so there are no useless flushes.
4859 */
4860 flush_parent:
4861 return bdrv_co_flush(bs->file);
4862 }
4863
4864 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4865 {
4866 Error *local_err = NULL;
4867 int ret;
4868
4869 if (!bs->drv) {
4870 return;
4871 }
4872
4873 if (bs->drv->bdrv_invalidate_cache) {
4874 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4875 } else if (bs->file) {
4876 bdrv_invalidate_cache(bs->file, &local_err);
4877 }
4878 if (local_err) {
4879 error_propagate(errp, local_err);
4880 return;
4881 }
4882
4883 ret = refresh_total_sectors(bs, bs->total_sectors);
4884 if (ret < 0) {
4885 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4886 return;
4887 }
4888 }
4889
4890 void bdrv_invalidate_cache_all(Error **errp)
4891 {
4892 BlockDriverState *bs;
4893 Error *local_err = NULL;
4894
4895 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4896 bdrv_invalidate_cache(bs, &local_err);
4897 if (local_err) {
4898 error_propagate(errp, local_err);
4899 return;
4900 }
4901 }
4902 }
4903
4904 void bdrv_clear_incoming_migration_all(void)
4905 {
4906 BlockDriverState *bs;
4907
4908 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4909 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4910 }
4911 }
4912
4913 int bdrv_flush(BlockDriverState *bs)
4914 {
4915 Coroutine *co;
4916 RwCo rwco = {
4917 .bs = bs,
4918 .ret = NOT_DONE,
4919 };
4920
4921 if (qemu_in_coroutine()) {
4922 /* Fast-path if already in coroutine context */
4923 bdrv_flush_co_entry(&rwco);
4924 } else {
4925 co = qemu_coroutine_create(bdrv_flush_co_entry);
4926 qemu_coroutine_enter(co, &rwco);
4927 while (rwco.ret == NOT_DONE) {
4928 qemu_aio_wait();
4929 }
4930 }
4931
4932 return rwco.ret;
4933 }
4934
4935 typedef struct DiscardCo {
4936 BlockDriverState *bs;
4937 int64_t sector_num;
4938 int nb_sectors;
4939 int ret;
4940 } DiscardCo;
4941 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4942 {
4943 DiscardCo *rwco = opaque;
4944
4945 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4946 }
4947
4948 /* if no limit is specified in the BlockLimits use a default
4949 * of 32768 512-byte sectors (16 MiB) per request.
4950 */
4951 #define MAX_DISCARD_DEFAULT 32768
4952
4953 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4954 int nb_sectors)
4955 {
4956 int max_discard;
4957
4958 if (!bs->drv) {
4959 return -ENOMEDIUM;
4960 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4961 return -EIO;
4962 } else if (bs->read_only) {
4963 return -EROFS;
4964 }
4965
4966 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4967
4968 /* Do nothing if disabled. */
4969 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4970 return 0;
4971 }
4972
4973 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
4974 return 0;
4975 }
4976
4977 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4978 while (nb_sectors > 0) {
4979 int ret;
4980 int num = nb_sectors;
4981
4982 /* align request */
4983 if (bs->bl.discard_alignment &&
4984 num >= bs->bl.discard_alignment &&
4985 sector_num % bs->bl.discard_alignment) {
4986 if (num > bs->bl.discard_alignment) {
4987 num = bs->bl.discard_alignment;
4988 }
4989 num -= sector_num % bs->bl.discard_alignment;
4990 }
4991
4992 /* limit request size */
4993 if (num > max_discard) {
4994 num = max_discard;
4995 }
4996
4997 if (bs->drv->bdrv_co_discard) {
4998 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4999 } else {
5000 BlockDriverAIOCB *acb;
5001 CoroutineIOCompletion co = {
5002 .coroutine = qemu_coroutine_self(),
5003 };
5004
5005 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5006 bdrv_co_io_em_complete, &co);
5007 if (acb == NULL) {
5008 return -EIO;
5009 } else {
5010 qemu_coroutine_yield();
5011 ret = co.ret;
5012 }
5013 }
5014 if (ret && ret != -ENOTSUP) {
5015 return ret;
5016 }
5017
5018 sector_num += num;
5019 nb_sectors -= num;
5020 }
5021 return 0;
5022 }
5023
5024 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5025 {
5026 Coroutine *co;
5027 DiscardCo rwco = {
5028 .bs = bs,
5029 .sector_num = sector_num,
5030 .nb_sectors = nb_sectors,
5031 .ret = NOT_DONE,
5032 };
5033
5034 if (qemu_in_coroutine()) {
5035 /* Fast-path if already in coroutine context */
5036 bdrv_discard_co_entry(&rwco);
5037 } else {
5038 co = qemu_coroutine_create(bdrv_discard_co_entry);
5039 qemu_coroutine_enter(co, &rwco);
5040 while (rwco.ret == NOT_DONE) {
5041 qemu_aio_wait();
5042 }
5043 }
5044
5045 return rwco.ret;
5046 }
5047
5048 /**************************************************************/
5049 /* removable device support */
5050
5051 /**
5052 * Return TRUE if the media is present
5053 */
5054 int bdrv_is_inserted(BlockDriverState *bs)
5055 {
5056 BlockDriver *drv = bs->drv;
5057
5058 if (!drv)
5059 return 0;
5060 if (!drv->bdrv_is_inserted)
5061 return 1;
5062 return drv->bdrv_is_inserted(bs);
5063 }
5064
5065 /**
5066 * Return whether the media changed since the last call to this
5067 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5068 */
5069 int bdrv_media_changed(BlockDriverState *bs)
5070 {
5071 BlockDriver *drv = bs->drv;
5072
5073 if (drv && drv->bdrv_media_changed) {
5074 return drv->bdrv_media_changed(bs);
5075 }
5076 return -ENOTSUP;
5077 }
5078
5079 /**
5080 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5081 */
5082 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5083 {
5084 BlockDriver *drv = bs->drv;
5085
5086 if (drv && drv->bdrv_eject) {
5087 drv->bdrv_eject(bs, eject_flag);
5088 }
5089
5090 if (bs->device_name[0] != '\0') {
5091 bdrv_emit_qmp_eject_event(bs, eject_flag);
5092 }
5093 }
5094
5095 /**
5096 * Lock or unlock the media (if it is locked, the user won't be able
5097 * to eject it manually).
5098 */
5099 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5100 {
5101 BlockDriver *drv = bs->drv;
5102
5103 trace_bdrv_lock_medium(bs, locked);
5104
5105 if (drv && drv->bdrv_lock_medium) {
5106 drv->bdrv_lock_medium(bs, locked);
5107 }
5108 }
5109
5110 /* needed for generic scsi interface */
5111
5112 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5113 {
5114 BlockDriver *drv = bs->drv;
5115
5116 if (drv && drv->bdrv_ioctl)
5117 return drv->bdrv_ioctl(bs, req, buf);
5118 return -ENOTSUP;
5119 }
5120
5121 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5122 unsigned long int req, void *buf,
5123 BlockDriverCompletionFunc *cb, void *opaque)
5124 {
5125 BlockDriver *drv = bs->drv;
5126
5127 if (drv && drv->bdrv_aio_ioctl)
5128 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5129 return NULL;
5130 }
5131
5132 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5133 {
5134 bs->guest_block_size = align;
5135 }
5136
5137 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5138 {
5139 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5140 }
5141
5142 /*
5143 * Check if all memory in this vector is sector aligned.
5144 */
5145 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5146 {
5147 int i;
5148 size_t alignment = bdrv_opt_mem_align(bs);
5149
5150 for (i = 0; i < qiov->niov; i++) {
5151 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5152 return false;
5153 }
5154 if (qiov->iov[i].iov_len % alignment) {
5155 return false;
5156 }
5157 }
5158
5159 return true;
5160 }
5161
5162 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5163 Error **errp)
5164 {
5165 int64_t bitmap_size;
5166 BdrvDirtyBitmap *bitmap;
5167
5168 assert((granularity & (granularity - 1)) == 0);
5169
5170 granularity >>= BDRV_SECTOR_BITS;
5171 assert(granularity);
5172 bitmap_size = bdrv_getlength(bs);
5173 if (bitmap_size < 0) {
5174 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5175 errno = -bitmap_size;
5176 return NULL;
5177 }
5178 bitmap_size >>= BDRV_SECTOR_BITS;
5179 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5180 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5181 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5182 return bitmap;
5183 }
5184
5185 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5186 {
5187 BdrvDirtyBitmap *bm, *next;
5188 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5189 if (bm == bitmap) {
5190 QLIST_REMOVE(bitmap, list);
5191 hbitmap_free(bitmap->bitmap);
5192 g_free(bitmap);
5193 return;
5194 }
5195 }
5196 }
5197
5198 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5199 {
5200 BdrvDirtyBitmap *bm;
5201 BlockDirtyInfoList *list = NULL;
5202 BlockDirtyInfoList **plist = &list;
5203
5204 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5205 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5206 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5207 info->count = bdrv_get_dirty_count(bs, bm);
5208 info->granularity =
5209 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5210 entry->value = info;
5211 *plist = entry;
5212 plist = &entry->next;
5213 }
5214
5215 return list;
5216 }
5217
5218 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5219 {
5220 if (bitmap) {
5221 return hbitmap_get(bitmap->bitmap, sector);
5222 } else {
5223 return 0;
5224 }
5225 }
5226
5227 void bdrv_dirty_iter_init(BlockDriverState *bs,
5228 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5229 {
5230 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5231 }
5232
5233 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5234 int nr_sectors)
5235 {
5236 BdrvDirtyBitmap *bitmap;
5237 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5238 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5239 }
5240 }
5241
5242 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5243 {
5244 BdrvDirtyBitmap *bitmap;
5245 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5246 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5247 }
5248 }
5249
5250 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5251 {
5252 return hbitmap_count(bitmap->bitmap);
5253 }
5254
5255 /* Get a reference to bs */
5256 void bdrv_ref(BlockDriverState *bs)
5257 {
5258 bs->refcnt++;
5259 }
5260
5261 /* Release a previously grabbed reference to bs.
5262 * If after releasing, reference count is zero, the BlockDriverState is
5263 * deleted. */
5264 void bdrv_unref(BlockDriverState *bs)
5265 {
5266 assert(bs->refcnt > 0);
5267 if (--bs->refcnt == 0) {
5268 bdrv_delete(bs);
5269 }
5270 }
5271
5272 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
5273 {
5274 assert(bs->in_use != in_use);
5275 bs->in_use = in_use;
5276 }
5277
5278 int bdrv_in_use(BlockDriverState *bs)
5279 {
5280 return bs->in_use;
5281 }
5282
5283 void bdrv_iostatus_enable(BlockDriverState *bs)
5284 {
5285 bs->iostatus_enabled = true;
5286 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5287 }
5288
5289 /* The I/O status is only enabled if the drive explicitly
5290 * enables it _and_ the VM is configured to stop on errors */
5291 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5292 {
5293 return (bs->iostatus_enabled &&
5294 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5295 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5296 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5297 }
5298
5299 void bdrv_iostatus_disable(BlockDriverState *bs)
5300 {
5301 bs->iostatus_enabled = false;
5302 }
5303
5304 void bdrv_iostatus_reset(BlockDriverState *bs)
5305 {
5306 if (bdrv_iostatus_is_enabled(bs)) {
5307 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5308 if (bs->job) {
5309 block_job_iostatus_reset(bs->job);
5310 }
5311 }
5312 }
5313
5314 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5315 {
5316 assert(bdrv_iostatus_is_enabled(bs));
5317 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5318 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5319 BLOCK_DEVICE_IO_STATUS_FAILED;
5320 }
5321 }
5322
5323 void
5324 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5325 enum BlockAcctType type)
5326 {
5327 assert(type < BDRV_MAX_IOTYPE);
5328
5329 cookie->bytes = bytes;
5330 cookie->start_time_ns = get_clock();
5331 cookie->type = type;
5332 }
5333
5334 void
5335 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5336 {
5337 assert(cookie->type < BDRV_MAX_IOTYPE);
5338
5339 bs->nr_bytes[cookie->type] += cookie->bytes;
5340 bs->nr_ops[cookie->type]++;
5341 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5342 }
5343
5344 void bdrv_img_create(const char *filename, const char *fmt,
5345 const char *base_filename, const char *base_fmt,
5346 char *options, uint64_t img_size, int flags,
5347 Error **errp, bool quiet)
5348 {
5349 QEMUOptionParameter *param = NULL, *create_options = NULL;
5350 QEMUOptionParameter *backing_fmt, *backing_file, *size;
5351 BlockDriver *drv, *proto_drv;
5352 BlockDriver *backing_drv = NULL;
5353 Error *local_err = NULL;
5354 int ret = 0;
5355
5356 /* Find driver and parse its options */
5357 drv = bdrv_find_format(fmt);
5358 if (!drv) {
5359 error_setg(errp, "Unknown file format '%s'", fmt);
5360 return;
5361 }
5362
5363 proto_drv = bdrv_find_protocol(filename, true);
5364 if (!proto_drv) {
5365 error_setg(errp, "Unknown protocol '%s'", filename);
5366 return;
5367 }
5368
5369 create_options = append_option_parameters(create_options,
5370 drv->create_options);
5371 create_options = append_option_parameters(create_options,
5372 proto_drv->create_options);
5373
5374 /* Create parameter list with default values */
5375 param = parse_option_parameters("", create_options, param);
5376
5377 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
5378
5379 /* Parse -o options */
5380 if (options) {
5381 param = parse_option_parameters(options, create_options, param);
5382 if (param == NULL) {
5383 error_setg(errp, "Invalid options for file format '%s'.", fmt);
5384 goto out;
5385 }
5386 }
5387
5388 if (base_filename) {
5389 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
5390 base_filename)) {
5391 error_setg(errp, "Backing file not supported for file format '%s'",
5392 fmt);
5393 goto out;
5394 }
5395 }
5396
5397 if (base_fmt) {
5398 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5399 error_setg(errp, "Backing file format not supported for file "
5400 "format '%s'", fmt);
5401 goto out;
5402 }
5403 }
5404
5405 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
5406 if (backing_file && backing_file->value.s) {
5407 if (!strcmp(filename, backing_file->value.s)) {
5408 error_setg(errp, "Error: Trying to create an image with the "
5409 "same filename as the backing file");
5410 goto out;
5411 }
5412 }
5413
5414 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
5415 if (backing_fmt && backing_fmt->value.s) {
5416 backing_drv = bdrv_find_format(backing_fmt->value.s);
5417 if (!backing_drv) {
5418 error_setg(errp, "Unknown backing file format '%s'",
5419 backing_fmt->value.s);
5420 goto out;
5421 }
5422 }
5423
5424 // The size for the image must always be specified, with one exception:
5425 // If we are using a backing file, we can obtain the size from there
5426 size = get_option_parameter(param, BLOCK_OPT_SIZE);
5427 if (size && size->value.n == -1) {
5428 if (backing_file && backing_file->value.s) {
5429 BlockDriverState *bs;
5430 uint64_t size;
5431 char buf[32];
5432 int back_flags;
5433
5434 /* backing files always opened read-only */
5435 back_flags =
5436 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5437
5438 bs = NULL;
5439 ret = bdrv_open(&bs, backing_file->value.s, NULL, NULL, back_flags,
5440 backing_drv, &local_err);
5441 if (ret < 0) {
5442 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5443 backing_file->value.s,
5444 error_get_pretty(local_err));
5445 error_free(local_err);
5446 local_err = NULL;
5447 goto out;
5448 }
5449 bdrv_get_geometry(bs, &size);
5450 size *= 512;
5451
5452 snprintf(buf, sizeof(buf), "%" PRId64, size);
5453 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
5454
5455 bdrv_unref(bs);
5456 } else {
5457 error_setg(errp, "Image creation needs a size parameter");
5458 goto out;
5459 }
5460 }
5461
5462 if (!quiet) {
5463 printf("Formatting '%s', fmt=%s ", filename, fmt);
5464 print_option_parameters(param);
5465 puts("");
5466 }
5467 ret = bdrv_create(drv, filename, param, &local_err);
5468 if (ret == -EFBIG) {
5469 /* This is generally a better message than whatever the driver would
5470 * deliver (especially because of the cluster_size_hint), since that
5471 * is most probably not much different from "image too large". */
5472 const char *cluster_size_hint = "";
5473 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
5474 cluster_size_hint = " (try using a larger cluster size)";
5475 }
5476 error_setg(errp, "The image size is too large for file format '%s'"
5477 "%s", fmt, cluster_size_hint);
5478 error_free(local_err);
5479 local_err = NULL;
5480 }
5481
5482 out:
5483 free_option_parameters(create_options);
5484 free_option_parameters(param);
5485
5486 if (local_err) {
5487 error_propagate(errp, local_err);
5488 }
5489 }
5490
5491 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5492 {
5493 /* Currently BlockDriverState always uses the main loop AioContext */
5494 return qemu_get_aio_context();
5495 }
5496
5497 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5498 NotifierWithReturn *notifier)
5499 {
5500 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5501 }
5502
5503 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
5504 {
5505 if (bs->drv->bdrv_amend_options == NULL) {
5506 return -ENOTSUP;
5507 }
5508 return bs->drv->bdrv_amend_options(bs, options);
5509 }
5510
5511 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5512 * of block filter and by bdrv_is_first_non_filter.
5513 * It is used to test if the given bs is the candidate or recurse more in the
5514 * node graph.
5515 */
5516 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5517 BlockDriverState *candidate)
5518 {
5519 /* return false if basic checks fails */
5520 if (!bs || !bs->drv) {
5521 return false;
5522 }
5523
5524 /* the code reached a non block filter driver -> check if the bs is
5525 * the same as the candidate. It's the recursion termination condition.
5526 */
5527 if (!bs->drv->is_filter) {
5528 return bs == candidate;
5529 }
5530 /* Down this path the driver is a block filter driver */
5531
5532 /* If the block filter recursion method is defined use it to recurse down
5533 * the node graph.
5534 */
5535 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5536 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5537 }
5538
5539 /* the driver is a block filter but don't allow to recurse -> return false
5540 */
5541 return false;
5542 }
5543
5544 /* This function checks if the candidate is the first non filter bs down it's
5545 * bs chain. Since we don't have pointers to parents it explore all bs chains
5546 * from the top. Some filters can choose not to pass down the recursion.
5547 */
5548 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5549 {
5550 BlockDriverState *bs;
5551
5552 /* walk down the bs forest recursively */
5553 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5554 bool perm;
5555
5556 /* try to recurse in this top level bs */
5557 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5558
5559 /* candidate is the first non filter */
5560 if (perm) {
5561 return true;
5562 }
5563 }
5564
5565 return false;
5566 }