]> git.proxmox.com Git - mirror_qemu.git/blob - block.c
blkdebug: add "remove_break" command
[mirror_qemu.git] / block.c
1 /*
2 * QEMU System Emulator block driver
3 *
4 * Copyright (c) 2003 Fabrice Bellard
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "monitor/monitor.h"
28 #include "block/block_int.h"
29 #include "block/blockjob.h"
30 #include "qemu/module.h"
31 #include "qapi/qmp/qjson.h"
32 #include "sysemu/sysemu.h"
33 #include "qemu/notify.h"
34 #include "block/coroutine.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37
38 #ifdef CONFIG_BSD
39 #include <sys/types.h>
40 #include <sys/stat.h>
41 #include <sys/ioctl.h>
42 #include <sys/queue.h>
43 #ifndef __DragonFly__
44 #include <sys/disk.h>
45 #endif
46 #endif
47
48 #ifdef _WIN32
49 #include <windows.h>
50 #endif
51
52 struct BdrvDirtyBitmap {
53 HBitmap *bitmap;
54 QLIST_ENTRY(BdrvDirtyBitmap) list;
55 };
56
57 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
58
59 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
60 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
61 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
62 BlockDriverCompletionFunc *cb, void *opaque);
63 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
64 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
65 BlockDriverCompletionFunc *cb, void *opaque);
66 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
67 int64_t sector_num, int nb_sectors,
68 QEMUIOVector *iov);
69 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
70 int64_t sector_num, int nb_sectors,
71 QEMUIOVector *iov);
72 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
73 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
74 BdrvRequestFlags flags);
75 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
76 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
77 BdrvRequestFlags flags);
78 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
79 int64_t sector_num,
80 QEMUIOVector *qiov,
81 int nb_sectors,
82 BlockDriverCompletionFunc *cb,
83 void *opaque,
84 bool is_write);
85 static void coroutine_fn bdrv_co_do_rw(void *opaque);
86 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
87 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
88
89 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
90 QTAILQ_HEAD_INITIALIZER(bdrv_states);
91
92 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
93 QLIST_HEAD_INITIALIZER(bdrv_drivers);
94
95 /* If non-zero, use only whitelisted block drivers */
96 static int use_bdrv_whitelist;
97
98 #ifdef _WIN32
99 static int is_windows_drive_prefix(const char *filename)
100 {
101 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
102 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
103 filename[1] == ':');
104 }
105
106 int is_windows_drive(const char *filename)
107 {
108 if (is_windows_drive_prefix(filename) &&
109 filename[2] == '\0')
110 return 1;
111 if (strstart(filename, "\\\\.\\", NULL) ||
112 strstart(filename, "//./", NULL))
113 return 1;
114 return 0;
115 }
116 #endif
117
118 /* throttling disk I/O limits */
119 void bdrv_set_io_limits(BlockDriverState *bs,
120 ThrottleConfig *cfg)
121 {
122 int i;
123
124 throttle_config(&bs->throttle_state, cfg);
125
126 for (i = 0; i < 2; i++) {
127 qemu_co_enter_next(&bs->throttled_reqs[i]);
128 }
129 }
130
131 /* this function drain all the throttled IOs */
132 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
133 {
134 bool drained = false;
135 bool enabled = bs->io_limits_enabled;
136 int i;
137
138 bs->io_limits_enabled = false;
139
140 for (i = 0; i < 2; i++) {
141 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
142 drained = true;
143 }
144 }
145
146 bs->io_limits_enabled = enabled;
147
148 return drained;
149 }
150
151 void bdrv_io_limits_disable(BlockDriverState *bs)
152 {
153 bs->io_limits_enabled = false;
154
155 bdrv_start_throttled_reqs(bs);
156
157 throttle_destroy(&bs->throttle_state);
158 }
159
160 static void bdrv_throttle_read_timer_cb(void *opaque)
161 {
162 BlockDriverState *bs = opaque;
163 qemu_co_enter_next(&bs->throttled_reqs[0]);
164 }
165
166 static void bdrv_throttle_write_timer_cb(void *opaque)
167 {
168 BlockDriverState *bs = opaque;
169 qemu_co_enter_next(&bs->throttled_reqs[1]);
170 }
171
172 /* should be called before bdrv_set_io_limits if a limit is set */
173 void bdrv_io_limits_enable(BlockDriverState *bs)
174 {
175 assert(!bs->io_limits_enabled);
176 throttle_init(&bs->throttle_state,
177 QEMU_CLOCK_VIRTUAL,
178 bdrv_throttle_read_timer_cb,
179 bdrv_throttle_write_timer_cb,
180 bs);
181 bs->io_limits_enabled = true;
182 }
183
184 /* This function makes an IO wait if needed
185 *
186 * @nb_sectors: the number of sectors of the IO
187 * @is_write: is the IO a write
188 */
189 static void bdrv_io_limits_intercept(BlockDriverState *bs,
190 int nb_sectors,
191 bool is_write)
192 {
193 /* does this io must wait */
194 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
195
196 /* if must wait or any request of this type throttled queue the IO */
197 if (must_wait ||
198 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
199 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
200 }
201
202 /* the IO will be executed, do the accounting */
203 throttle_account(&bs->throttle_state,
204 is_write,
205 nb_sectors * BDRV_SECTOR_SIZE);
206
207 /* if the next request must wait -> do nothing */
208 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
209 return;
210 }
211
212 /* else queue next request for execution */
213 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
214 }
215
216 /* check if the path starts with "<protocol>:" */
217 static int path_has_protocol(const char *path)
218 {
219 const char *p;
220
221 #ifdef _WIN32
222 if (is_windows_drive(path) ||
223 is_windows_drive_prefix(path)) {
224 return 0;
225 }
226 p = path + strcspn(path, ":/\\");
227 #else
228 p = path + strcspn(path, ":/");
229 #endif
230
231 return *p == ':';
232 }
233
234 int path_is_absolute(const char *path)
235 {
236 #ifdef _WIN32
237 /* specific case for names like: "\\.\d:" */
238 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
239 return 1;
240 }
241 return (*path == '/' || *path == '\\');
242 #else
243 return (*path == '/');
244 #endif
245 }
246
247 /* if filename is absolute, just copy it to dest. Otherwise, build a
248 path to it by considering it is relative to base_path. URL are
249 supported. */
250 void path_combine(char *dest, int dest_size,
251 const char *base_path,
252 const char *filename)
253 {
254 const char *p, *p1;
255 int len;
256
257 if (dest_size <= 0)
258 return;
259 if (path_is_absolute(filename)) {
260 pstrcpy(dest, dest_size, filename);
261 } else {
262 p = strchr(base_path, ':');
263 if (p)
264 p++;
265 else
266 p = base_path;
267 p1 = strrchr(base_path, '/');
268 #ifdef _WIN32
269 {
270 const char *p2;
271 p2 = strrchr(base_path, '\\');
272 if (!p1 || p2 > p1)
273 p1 = p2;
274 }
275 #endif
276 if (p1)
277 p1++;
278 else
279 p1 = base_path;
280 if (p1 > p)
281 p = p1;
282 len = p - base_path;
283 if (len > dest_size - 1)
284 len = dest_size - 1;
285 memcpy(dest, base_path, len);
286 dest[len] = '\0';
287 pstrcat(dest, dest_size, filename);
288 }
289 }
290
291 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
292 {
293 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
294 pstrcpy(dest, sz, bs->backing_file);
295 } else {
296 path_combine(dest, sz, bs->filename, bs->backing_file);
297 }
298 }
299
300 void bdrv_register(BlockDriver *bdrv)
301 {
302 /* Block drivers without coroutine functions need emulation */
303 if (!bdrv->bdrv_co_readv) {
304 bdrv->bdrv_co_readv = bdrv_co_readv_em;
305 bdrv->bdrv_co_writev = bdrv_co_writev_em;
306
307 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
308 * the block driver lacks aio we need to emulate that too.
309 */
310 if (!bdrv->bdrv_aio_readv) {
311 /* add AIO emulation layer */
312 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
313 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
314 }
315 }
316
317 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
318 }
319
320 /* create a new block device (by default it is empty) */
321 BlockDriverState *bdrv_new(const char *device_name)
322 {
323 BlockDriverState *bs;
324
325 bs = g_malloc0(sizeof(BlockDriverState));
326 QLIST_INIT(&bs->dirty_bitmaps);
327 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
328 if (device_name[0] != '\0') {
329 QTAILQ_INSERT_TAIL(&bdrv_states, bs, list);
330 }
331 bdrv_iostatus_disable(bs);
332 notifier_list_init(&bs->close_notifiers);
333 notifier_with_return_list_init(&bs->before_write_notifiers);
334 qemu_co_queue_init(&bs->throttled_reqs[0]);
335 qemu_co_queue_init(&bs->throttled_reqs[1]);
336 bs->refcnt = 1;
337
338 return bs;
339 }
340
341 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
342 {
343 notifier_list_add(&bs->close_notifiers, notify);
344 }
345
346 BlockDriver *bdrv_find_format(const char *format_name)
347 {
348 BlockDriver *drv1;
349 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
350 if (!strcmp(drv1->format_name, format_name)) {
351 return drv1;
352 }
353 }
354 return NULL;
355 }
356
357 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
358 {
359 static const char *whitelist_rw[] = {
360 CONFIG_BDRV_RW_WHITELIST
361 };
362 static const char *whitelist_ro[] = {
363 CONFIG_BDRV_RO_WHITELIST
364 };
365 const char **p;
366
367 if (!whitelist_rw[0] && !whitelist_ro[0]) {
368 return 1; /* no whitelist, anything goes */
369 }
370
371 for (p = whitelist_rw; *p; p++) {
372 if (!strcmp(drv->format_name, *p)) {
373 return 1;
374 }
375 }
376 if (read_only) {
377 for (p = whitelist_ro; *p; p++) {
378 if (!strcmp(drv->format_name, *p)) {
379 return 1;
380 }
381 }
382 }
383 return 0;
384 }
385
386 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
387 bool read_only)
388 {
389 BlockDriver *drv = bdrv_find_format(format_name);
390 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
391 }
392
393 typedef struct CreateCo {
394 BlockDriver *drv;
395 char *filename;
396 QEMUOptionParameter *options;
397 int ret;
398 Error *err;
399 } CreateCo;
400
401 static void coroutine_fn bdrv_create_co_entry(void *opaque)
402 {
403 Error *local_err = NULL;
404 int ret;
405
406 CreateCo *cco = opaque;
407 assert(cco->drv);
408
409 ret = cco->drv->bdrv_create(cco->filename, cco->options, &local_err);
410 if (error_is_set(&local_err)) {
411 error_propagate(&cco->err, local_err);
412 }
413 cco->ret = ret;
414 }
415
416 int bdrv_create(BlockDriver *drv, const char* filename,
417 QEMUOptionParameter *options, Error **errp)
418 {
419 int ret;
420
421 Coroutine *co;
422 CreateCo cco = {
423 .drv = drv,
424 .filename = g_strdup(filename),
425 .options = options,
426 .ret = NOT_DONE,
427 .err = NULL,
428 };
429
430 if (!drv->bdrv_create) {
431 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
432 ret = -ENOTSUP;
433 goto out;
434 }
435
436 if (qemu_in_coroutine()) {
437 /* Fast-path if already in coroutine context */
438 bdrv_create_co_entry(&cco);
439 } else {
440 co = qemu_coroutine_create(bdrv_create_co_entry);
441 qemu_coroutine_enter(co, &cco);
442 while (cco.ret == NOT_DONE) {
443 qemu_aio_wait();
444 }
445 }
446
447 ret = cco.ret;
448 if (ret < 0) {
449 if (error_is_set(&cco.err)) {
450 error_propagate(errp, cco.err);
451 } else {
452 error_setg_errno(errp, -ret, "Could not create image");
453 }
454 }
455
456 out:
457 g_free(cco.filename);
458 return ret;
459 }
460
461 int bdrv_create_file(const char* filename, QEMUOptionParameter *options,
462 Error **errp)
463 {
464 BlockDriver *drv;
465 Error *local_err = NULL;
466 int ret;
467
468 drv = bdrv_find_protocol(filename, true);
469 if (drv == NULL) {
470 error_setg(errp, "Could not find protocol for file '%s'", filename);
471 return -ENOENT;
472 }
473
474 ret = bdrv_create(drv, filename, options, &local_err);
475 if (error_is_set(&local_err)) {
476 error_propagate(errp, local_err);
477 }
478 return ret;
479 }
480
481 /*
482 * Create a uniquely-named empty temporary file.
483 * Return 0 upon success, otherwise a negative errno value.
484 */
485 int get_tmp_filename(char *filename, int size)
486 {
487 #ifdef _WIN32
488 char temp_dir[MAX_PATH];
489 /* GetTempFileName requires that its output buffer (4th param)
490 have length MAX_PATH or greater. */
491 assert(size >= MAX_PATH);
492 return (GetTempPath(MAX_PATH, temp_dir)
493 && GetTempFileName(temp_dir, "qem", 0, filename)
494 ? 0 : -GetLastError());
495 #else
496 int fd;
497 const char *tmpdir;
498 tmpdir = getenv("TMPDIR");
499 if (!tmpdir)
500 tmpdir = "/tmp";
501 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
502 return -EOVERFLOW;
503 }
504 fd = mkstemp(filename);
505 if (fd < 0) {
506 return -errno;
507 }
508 if (close(fd) != 0) {
509 unlink(filename);
510 return -errno;
511 }
512 return 0;
513 #endif
514 }
515
516 /*
517 * Detect host devices. By convention, /dev/cdrom[N] is always
518 * recognized as a host CDROM.
519 */
520 static BlockDriver *find_hdev_driver(const char *filename)
521 {
522 int score_max = 0, score;
523 BlockDriver *drv = NULL, *d;
524
525 QLIST_FOREACH(d, &bdrv_drivers, list) {
526 if (d->bdrv_probe_device) {
527 score = d->bdrv_probe_device(filename);
528 if (score > score_max) {
529 score_max = score;
530 drv = d;
531 }
532 }
533 }
534
535 return drv;
536 }
537
538 BlockDriver *bdrv_find_protocol(const char *filename,
539 bool allow_protocol_prefix)
540 {
541 BlockDriver *drv1;
542 char protocol[128];
543 int len;
544 const char *p;
545
546 /* TODO Drivers without bdrv_file_open must be specified explicitly */
547
548 /*
549 * XXX(hch): we really should not let host device detection
550 * override an explicit protocol specification, but moving this
551 * later breaks access to device names with colons in them.
552 * Thanks to the brain-dead persistent naming schemes on udev-
553 * based Linux systems those actually are quite common.
554 */
555 drv1 = find_hdev_driver(filename);
556 if (drv1) {
557 return drv1;
558 }
559
560 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
561 return bdrv_find_format("file");
562 }
563
564 p = strchr(filename, ':');
565 assert(p != NULL);
566 len = p - filename;
567 if (len > sizeof(protocol) - 1)
568 len = sizeof(protocol) - 1;
569 memcpy(protocol, filename, len);
570 protocol[len] = '\0';
571 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
572 if (drv1->protocol_name &&
573 !strcmp(drv1->protocol_name, protocol)) {
574 return drv1;
575 }
576 }
577 return NULL;
578 }
579
580 static int find_image_format(BlockDriverState *bs, const char *filename,
581 BlockDriver **pdrv, Error **errp)
582 {
583 int score, score_max;
584 BlockDriver *drv1, *drv;
585 uint8_t buf[2048];
586 int ret = 0;
587
588 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
589 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
590 drv = bdrv_find_format("raw");
591 if (!drv) {
592 error_setg(errp, "Could not find raw image format");
593 ret = -ENOENT;
594 }
595 *pdrv = drv;
596 return ret;
597 }
598
599 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
600 if (ret < 0) {
601 error_setg_errno(errp, -ret, "Could not read image for determining its "
602 "format");
603 *pdrv = NULL;
604 return ret;
605 }
606
607 score_max = 0;
608 drv = NULL;
609 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
610 if (drv1->bdrv_probe) {
611 score = drv1->bdrv_probe(buf, ret, filename);
612 if (score > score_max) {
613 score_max = score;
614 drv = drv1;
615 }
616 }
617 }
618 if (!drv) {
619 error_setg(errp, "Could not determine image format: No compatible "
620 "driver found");
621 ret = -ENOENT;
622 }
623 *pdrv = drv;
624 return ret;
625 }
626
627 /**
628 * Set the current 'total_sectors' value
629 */
630 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
631 {
632 BlockDriver *drv = bs->drv;
633
634 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
635 if (bs->sg)
636 return 0;
637
638 /* query actual device if possible, otherwise just trust the hint */
639 if (drv->bdrv_getlength) {
640 int64_t length = drv->bdrv_getlength(bs);
641 if (length < 0) {
642 return length;
643 }
644 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
645 }
646
647 bs->total_sectors = hint;
648 return 0;
649 }
650
651 /**
652 * Set open flags for a given discard mode
653 *
654 * Return 0 on success, -1 if the discard mode was invalid.
655 */
656 int bdrv_parse_discard_flags(const char *mode, int *flags)
657 {
658 *flags &= ~BDRV_O_UNMAP;
659
660 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
661 /* do nothing */
662 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
663 *flags |= BDRV_O_UNMAP;
664 } else {
665 return -1;
666 }
667
668 return 0;
669 }
670
671 /**
672 * Set open flags for a given cache mode
673 *
674 * Return 0 on success, -1 if the cache mode was invalid.
675 */
676 int bdrv_parse_cache_flags(const char *mode, int *flags)
677 {
678 *flags &= ~BDRV_O_CACHE_MASK;
679
680 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
681 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
682 } else if (!strcmp(mode, "directsync")) {
683 *flags |= BDRV_O_NOCACHE;
684 } else if (!strcmp(mode, "writeback")) {
685 *flags |= BDRV_O_CACHE_WB;
686 } else if (!strcmp(mode, "unsafe")) {
687 *flags |= BDRV_O_CACHE_WB;
688 *flags |= BDRV_O_NO_FLUSH;
689 } else if (!strcmp(mode, "writethrough")) {
690 /* this is the default */
691 } else {
692 return -1;
693 }
694
695 return 0;
696 }
697
698 /**
699 * The copy-on-read flag is actually a reference count so multiple users may
700 * use the feature without worrying about clobbering its previous state.
701 * Copy-on-read stays enabled until all users have called to disable it.
702 */
703 void bdrv_enable_copy_on_read(BlockDriverState *bs)
704 {
705 bs->copy_on_read++;
706 }
707
708 void bdrv_disable_copy_on_read(BlockDriverState *bs)
709 {
710 assert(bs->copy_on_read > 0);
711 bs->copy_on_read--;
712 }
713
714 static int bdrv_open_flags(BlockDriverState *bs, int flags)
715 {
716 int open_flags = flags | BDRV_O_CACHE_WB;
717
718 /*
719 * Clear flags that are internal to the block layer before opening the
720 * image.
721 */
722 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
723
724 /*
725 * Snapshots should be writable.
726 */
727 if (bs->is_temporary) {
728 open_flags |= BDRV_O_RDWR;
729 }
730
731 return open_flags;
732 }
733
734 /*
735 * Common part for opening disk images and files
736 *
737 * Removes all processed options from *options.
738 */
739 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
740 QDict *options, int flags, BlockDriver *drv, Error **errp)
741 {
742 int ret, open_flags;
743 const char *filename;
744 Error *local_err = NULL;
745
746 assert(drv != NULL);
747 assert(bs->file == NULL);
748 assert(options != NULL && bs->options != options);
749
750 if (file != NULL) {
751 filename = file->filename;
752 } else {
753 filename = qdict_get_try_str(options, "filename");
754 }
755
756 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
757
758 /* bdrv_open() with directly using a protocol as drv. This layer is already
759 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
760 * and return immediately. */
761 if (file != NULL && drv->bdrv_file_open) {
762 bdrv_swap(file, bs);
763 return 0;
764 }
765
766 bs->open_flags = flags;
767 bs->buffer_alignment = 512;
768 bs->zero_beyond_eof = true;
769 open_flags = bdrv_open_flags(bs, flags);
770 bs->read_only = !(open_flags & BDRV_O_RDWR);
771
772 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
773 error_setg(errp,
774 !bs->read_only && bdrv_is_whitelisted(drv, true)
775 ? "Driver '%s' can only be used for read-only devices"
776 : "Driver '%s' is not whitelisted",
777 drv->format_name);
778 return -ENOTSUP;
779 }
780
781 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
782 if (flags & BDRV_O_COPY_ON_READ) {
783 if (!bs->read_only) {
784 bdrv_enable_copy_on_read(bs);
785 } else {
786 error_setg(errp, "Can't use copy-on-read on read-only device");
787 return -EINVAL;
788 }
789 }
790
791 if (filename != NULL) {
792 pstrcpy(bs->filename, sizeof(bs->filename), filename);
793 } else {
794 bs->filename[0] = '\0';
795 }
796
797 bs->drv = drv;
798 bs->opaque = g_malloc0(drv->instance_size);
799
800 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
801
802 /* Open the image, either directly or using a protocol */
803 if (drv->bdrv_file_open) {
804 assert(file == NULL);
805 assert(!drv->bdrv_needs_filename || filename != NULL);
806 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
807 } else {
808 if (file == NULL) {
809 error_setg(errp, "Can't use '%s' as a block driver for the "
810 "protocol level", drv->format_name);
811 ret = -EINVAL;
812 goto free_and_fail;
813 }
814 bs->file = file;
815 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
816 }
817
818 if (ret < 0) {
819 if (error_is_set(&local_err)) {
820 error_propagate(errp, local_err);
821 } else if (bs->filename[0]) {
822 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
823 } else {
824 error_setg_errno(errp, -ret, "Could not open image");
825 }
826 goto free_and_fail;
827 }
828
829 ret = refresh_total_sectors(bs, bs->total_sectors);
830 if (ret < 0) {
831 error_setg_errno(errp, -ret, "Could not refresh total sector count");
832 goto free_and_fail;
833 }
834
835 #ifndef _WIN32
836 if (bs->is_temporary) {
837 assert(bs->filename[0] != '\0');
838 unlink(bs->filename);
839 }
840 #endif
841 return 0;
842
843 free_and_fail:
844 bs->file = NULL;
845 g_free(bs->opaque);
846 bs->opaque = NULL;
847 bs->drv = NULL;
848 return ret;
849 }
850
851 /*
852 * Opens a file using a protocol (file, host_device, nbd, ...)
853 *
854 * options is a QDict of options to pass to the block drivers, or NULL for an
855 * empty set of options. The reference to the QDict belongs to the block layer
856 * after the call (even on failure), so if the caller intends to reuse the
857 * dictionary, it needs to use QINCREF() before calling bdrv_file_open.
858 */
859 int bdrv_file_open(BlockDriverState **pbs, const char *filename,
860 QDict *options, int flags, Error **errp)
861 {
862 BlockDriverState *bs;
863 BlockDriver *drv;
864 const char *drvname;
865 bool allow_protocol_prefix = false;
866 Error *local_err = NULL;
867 int ret;
868
869 /* NULL means an empty set of options */
870 if (options == NULL) {
871 options = qdict_new();
872 }
873
874 bs = bdrv_new("");
875 bs->options = options;
876 options = qdict_clone_shallow(options);
877
878 /* Fetch the file name from the options QDict if necessary */
879 if (!filename) {
880 filename = qdict_get_try_str(options, "filename");
881 } else if (filename && !qdict_haskey(options, "filename")) {
882 qdict_put(options, "filename", qstring_from_str(filename));
883 allow_protocol_prefix = true;
884 } else {
885 error_setg(errp, "Can't specify 'file' and 'filename' options at the "
886 "same time");
887 ret = -EINVAL;
888 goto fail;
889 }
890
891 /* Find the right block driver */
892 drvname = qdict_get_try_str(options, "driver");
893 if (drvname) {
894 drv = bdrv_find_format(drvname);
895 if (!drv) {
896 error_setg(errp, "Unknown driver '%s'", drvname);
897 }
898 qdict_del(options, "driver");
899 } else if (filename) {
900 drv = bdrv_find_protocol(filename, allow_protocol_prefix);
901 if (!drv) {
902 error_setg(errp, "Unknown protocol");
903 }
904 } else {
905 error_setg(errp, "Must specify either driver or file");
906 drv = NULL;
907 }
908
909 if (!drv) {
910 /* errp has been set already */
911 ret = -ENOENT;
912 goto fail;
913 }
914
915 /* Parse the filename and open it */
916 if (drv->bdrv_parse_filename && filename) {
917 drv->bdrv_parse_filename(filename, options, &local_err);
918 if (error_is_set(&local_err)) {
919 error_propagate(errp, local_err);
920 ret = -EINVAL;
921 goto fail;
922 }
923 qdict_del(options, "filename");
924 } else if (drv->bdrv_needs_filename && !filename) {
925 error_setg(errp, "The '%s' block driver requires a file name",
926 drv->format_name);
927 ret = -EINVAL;
928 goto fail;
929 }
930
931 ret = bdrv_open_common(bs, NULL, options, flags, drv, &local_err);
932 if (ret < 0) {
933 error_propagate(errp, local_err);
934 goto fail;
935 }
936
937 /* Check if any unknown options were used */
938 if (qdict_size(options) != 0) {
939 const QDictEntry *entry = qdict_first(options);
940 error_setg(errp, "Block protocol '%s' doesn't support the option '%s'",
941 drv->format_name, entry->key);
942 ret = -EINVAL;
943 goto fail;
944 }
945 QDECREF(options);
946
947 bs->growable = 1;
948 *pbs = bs;
949 return 0;
950
951 fail:
952 QDECREF(options);
953 if (!bs->drv) {
954 QDECREF(bs->options);
955 }
956 bdrv_unref(bs);
957 return ret;
958 }
959
960 /*
961 * Opens the backing file for a BlockDriverState if not yet open
962 *
963 * options is a QDict of options to pass to the block drivers, or NULL for an
964 * empty set of options. The reference to the QDict is transferred to this
965 * function (even on failure), so if the caller intends to reuse the dictionary,
966 * it needs to use QINCREF() before calling bdrv_file_open.
967 */
968 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
969 {
970 char backing_filename[PATH_MAX];
971 int back_flags, ret;
972 BlockDriver *back_drv = NULL;
973 Error *local_err = NULL;
974
975 if (bs->backing_hd != NULL) {
976 QDECREF(options);
977 return 0;
978 }
979
980 /* NULL means an empty set of options */
981 if (options == NULL) {
982 options = qdict_new();
983 }
984
985 bs->open_flags &= ~BDRV_O_NO_BACKING;
986 if (qdict_haskey(options, "file.filename")) {
987 backing_filename[0] = '\0';
988 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
989 QDECREF(options);
990 return 0;
991 } else {
992 bdrv_get_full_backing_filename(bs, backing_filename,
993 sizeof(backing_filename));
994 }
995
996 bs->backing_hd = bdrv_new("");
997
998 if (bs->backing_format[0] != '\0') {
999 back_drv = bdrv_find_format(bs->backing_format);
1000 }
1001
1002 /* backing files always opened read-only */
1003 back_flags = bs->open_flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT |
1004 BDRV_O_COPY_ON_READ);
1005
1006 ret = bdrv_open(bs->backing_hd,
1007 *backing_filename ? backing_filename : NULL, options,
1008 back_flags, back_drv, &local_err);
1009 if (ret < 0) {
1010 bdrv_unref(bs->backing_hd);
1011 bs->backing_hd = NULL;
1012 bs->open_flags |= BDRV_O_NO_BACKING;
1013 error_setg(errp, "Could not open backing file: %s",
1014 error_get_pretty(local_err));
1015 error_free(local_err);
1016 return ret;
1017 }
1018 pstrcpy(bs->backing_file, sizeof(bs->backing_file),
1019 bs->backing_hd->file->filename);
1020 return 0;
1021 }
1022
1023 /*
1024 * Opens a disk image (raw, qcow2, vmdk, ...)
1025 *
1026 * options is a QDict of options to pass to the block drivers, or NULL for an
1027 * empty set of options. The reference to the QDict belongs to the block layer
1028 * after the call (even on failure), so if the caller intends to reuse the
1029 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1030 */
1031 int bdrv_open(BlockDriverState *bs, const char *filename, QDict *options,
1032 int flags, BlockDriver *drv, Error **errp)
1033 {
1034 int ret;
1035 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1036 char tmp_filename[PATH_MAX + 1];
1037 BlockDriverState *file = NULL;
1038 QDict *file_options = NULL;
1039 const char *drvname;
1040 Error *local_err = NULL;
1041
1042 /* NULL means an empty set of options */
1043 if (options == NULL) {
1044 options = qdict_new();
1045 }
1046
1047 bs->options = options;
1048 options = qdict_clone_shallow(options);
1049
1050 /* For snapshot=on, create a temporary qcow2 overlay */
1051 if (flags & BDRV_O_SNAPSHOT) {
1052 BlockDriverState *bs1;
1053 int64_t total_size;
1054 BlockDriver *bdrv_qcow2;
1055 QEMUOptionParameter *create_options;
1056 char backing_filename[PATH_MAX];
1057
1058 if (qdict_size(options) != 0) {
1059 error_setg(errp, "Can't use snapshot=on with driver-specific options");
1060 ret = -EINVAL;
1061 goto fail;
1062 }
1063 assert(filename != NULL);
1064
1065 /* if snapshot, we create a temporary backing file and open it
1066 instead of opening 'filename' directly */
1067
1068 /* if there is a backing file, use it */
1069 bs1 = bdrv_new("");
1070 ret = bdrv_open(bs1, filename, NULL, 0, drv, &local_err);
1071 if (ret < 0) {
1072 bdrv_unref(bs1);
1073 goto fail;
1074 }
1075 total_size = bdrv_getlength(bs1) & BDRV_SECTOR_MASK;
1076
1077 bdrv_unref(bs1);
1078
1079 ret = get_tmp_filename(tmp_filename, sizeof(tmp_filename));
1080 if (ret < 0) {
1081 error_setg_errno(errp, -ret, "Could not get temporary filename");
1082 goto fail;
1083 }
1084
1085 /* Real path is meaningless for protocols */
1086 if (path_has_protocol(filename)) {
1087 snprintf(backing_filename, sizeof(backing_filename),
1088 "%s", filename);
1089 } else if (!realpath(filename, backing_filename)) {
1090 ret = -errno;
1091 error_setg_errno(errp, errno, "Could not resolve path '%s'", filename);
1092 goto fail;
1093 }
1094
1095 bdrv_qcow2 = bdrv_find_format("qcow2");
1096 create_options = parse_option_parameters("", bdrv_qcow2->create_options,
1097 NULL);
1098
1099 set_option_parameter_int(create_options, BLOCK_OPT_SIZE, total_size);
1100 set_option_parameter(create_options, BLOCK_OPT_BACKING_FILE,
1101 backing_filename);
1102 if (drv) {
1103 set_option_parameter(create_options, BLOCK_OPT_BACKING_FMT,
1104 drv->format_name);
1105 }
1106
1107 ret = bdrv_create(bdrv_qcow2, tmp_filename, create_options, &local_err);
1108 free_option_parameters(create_options);
1109 if (ret < 0) {
1110 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1111 "'%s': %s", tmp_filename,
1112 error_get_pretty(local_err));
1113 error_free(local_err);
1114 local_err = NULL;
1115 goto fail;
1116 }
1117
1118 filename = tmp_filename;
1119 drv = bdrv_qcow2;
1120 bs->is_temporary = 1;
1121 }
1122
1123 /* Open image file without format layer */
1124 if (flags & BDRV_O_RDWR) {
1125 flags |= BDRV_O_ALLOW_RDWR;
1126 }
1127
1128 qdict_extract_subqdict(options, &file_options, "file.");
1129
1130 ret = bdrv_file_open(&file, filename, file_options,
1131 bdrv_open_flags(bs, flags | BDRV_O_UNMAP), &local_err);
1132 if (ret < 0) {
1133 goto fail;
1134 }
1135
1136 /* Find the right image format driver */
1137 drvname = qdict_get_try_str(options, "driver");
1138 if (drvname) {
1139 drv = bdrv_find_format(drvname);
1140 qdict_del(options, "driver");
1141 if (!drv) {
1142 error_setg(errp, "Invalid driver: '%s'", drvname);
1143 ret = -EINVAL;
1144 goto unlink_and_fail;
1145 }
1146 }
1147
1148 if (!drv) {
1149 ret = find_image_format(file, filename, &drv, &local_err);
1150 }
1151
1152 if (!drv) {
1153 goto unlink_and_fail;
1154 }
1155
1156 /* Open the image */
1157 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1158 if (ret < 0) {
1159 goto unlink_and_fail;
1160 }
1161
1162 if (bs->file != file) {
1163 bdrv_unref(file);
1164 file = NULL;
1165 }
1166
1167 /* If there is a backing file, use it */
1168 if ((flags & BDRV_O_NO_BACKING) == 0) {
1169 QDict *backing_options;
1170
1171 qdict_extract_subqdict(options, &backing_options, "backing.");
1172 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1173 if (ret < 0) {
1174 goto close_and_fail;
1175 }
1176 }
1177
1178 /* Check if any unknown options were used */
1179 if (qdict_size(options) != 0) {
1180 const QDictEntry *entry = qdict_first(options);
1181 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1182 "support the option '%s'", drv->format_name, bs->device_name,
1183 entry->key);
1184
1185 ret = -EINVAL;
1186 goto close_and_fail;
1187 }
1188 QDECREF(options);
1189
1190 if (!bdrv_key_required(bs)) {
1191 bdrv_dev_change_media_cb(bs, true);
1192 }
1193
1194 return 0;
1195
1196 unlink_and_fail:
1197 if (file != NULL) {
1198 bdrv_unref(file);
1199 }
1200 if (bs->is_temporary) {
1201 unlink(filename);
1202 }
1203 fail:
1204 QDECREF(bs->options);
1205 QDECREF(options);
1206 bs->options = NULL;
1207 if (error_is_set(&local_err)) {
1208 error_propagate(errp, local_err);
1209 }
1210 return ret;
1211
1212 close_and_fail:
1213 bdrv_close(bs);
1214 QDECREF(options);
1215 if (error_is_set(&local_err)) {
1216 error_propagate(errp, local_err);
1217 }
1218 return ret;
1219 }
1220
1221 typedef struct BlockReopenQueueEntry {
1222 bool prepared;
1223 BDRVReopenState state;
1224 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1225 } BlockReopenQueueEntry;
1226
1227 /*
1228 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1229 * reopen of multiple devices.
1230 *
1231 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1232 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1233 * be created and initialized. This newly created BlockReopenQueue should be
1234 * passed back in for subsequent calls that are intended to be of the same
1235 * atomic 'set'.
1236 *
1237 * bs is the BlockDriverState to add to the reopen queue.
1238 *
1239 * flags contains the open flags for the associated bs
1240 *
1241 * returns a pointer to bs_queue, which is either the newly allocated
1242 * bs_queue, or the existing bs_queue being used.
1243 *
1244 */
1245 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1246 BlockDriverState *bs, int flags)
1247 {
1248 assert(bs != NULL);
1249
1250 BlockReopenQueueEntry *bs_entry;
1251 if (bs_queue == NULL) {
1252 bs_queue = g_new0(BlockReopenQueue, 1);
1253 QSIMPLEQ_INIT(bs_queue);
1254 }
1255
1256 if (bs->file) {
1257 bdrv_reopen_queue(bs_queue, bs->file, flags);
1258 }
1259
1260 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1261 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1262
1263 bs_entry->state.bs = bs;
1264 bs_entry->state.flags = flags;
1265
1266 return bs_queue;
1267 }
1268
1269 /*
1270 * Reopen multiple BlockDriverStates atomically & transactionally.
1271 *
1272 * The queue passed in (bs_queue) must have been built up previous
1273 * via bdrv_reopen_queue().
1274 *
1275 * Reopens all BDS specified in the queue, with the appropriate
1276 * flags. All devices are prepared for reopen, and failure of any
1277 * device will cause all device changes to be abandonded, and intermediate
1278 * data cleaned up.
1279 *
1280 * If all devices prepare successfully, then the changes are committed
1281 * to all devices.
1282 *
1283 */
1284 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1285 {
1286 int ret = -1;
1287 BlockReopenQueueEntry *bs_entry, *next;
1288 Error *local_err = NULL;
1289
1290 assert(bs_queue != NULL);
1291
1292 bdrv_drain_all();
1293
1294 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1295 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1296 error_propagate(errp, local_err);
1297 goto cleanup;
1298 }
1299 bs_entry->prepared = true;
1300 }
1301
1302 /* If we reach this point, we have success and just need to apply the
1303 * changes
1304 */
1305 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1306 bdrv_reopen_commit(&bs_entry->state);
1307 }
1308
1309 ret = 0;
1310
1311 cleanup:
1312 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1313 if (ret && bs_entry->prepared) {
1314 bdrv_reopen_abort(&bs_entry->state);
1315 }
1316 g_free(bs_entry);
1317 }
1318 g_free(bs_queue);
1319 return ret;
1320 }
1321
1322
1323 /* Reopen a single BlockDriverState with the specified flags. */
1324 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1325 {
1326 int ret = -1;
1327 Error *local_err = NULL;
1328 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1329
1330 ret = bdrv_reopen_multiple(queue, &local_err);
1331 if (local_err != NULL) {
1332 error_propagate(errp, local_err);
1333 }
1334 return ret;
1335 }
1336
1337
1338 /*
1339 * Prepares a BlockDriverState for reopen. All changes are staged in the
1340 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1341 * the block driver layer .bdrv_reopen_prepare()
1342 *
1343 * bs is the BlockDriverState to reopen
1344 * flags are the new open flags
1345 * queue is the reopen queue
1346 *
1347 * Returns 0 on success, non-zero on error. On error errp will be set
1348 * as well.
1349 *
1350 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1351 * It is the responsibility of the caller to then call the abort() or
1352 * commit() for any other BDS that have been left in a prepare() state
1353 *
1354 */
1355 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1356 Error **errp)
1357 {
1358 int ret = -1;
1359 Error *local_err = NULL;
1360 BlockDriver *drv;
1361
1362 assert(reopen_state != NULL);
1363 assert(reopen_state->bs->drv != NULL);
1364 drv = reopen_state->bs->drv;
1365
1366 /* if we are to stay read-only, do not allow permission change
1367 * to r/w */
1368 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1369 reopen_state->flags & BDRV_O_RDWR) {
1370 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1371 reopen_state->bs->device_name);
1372 goto error;
1373 }
1374
1375
1376 ret = bdrv_flush(reopen_state->bs);
1377 if (ret) {
1378 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1379 strerror(-ret));
1380 goto error;
1381 }
1382
1383 if (drv->bdrv_reopen_prepare) {
1384 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1385 if (ret) {
1386 if (local_err != NULL) {
1387 error_propagate(errp, local_err);
1388 } else {
1389 error_setg(errp, "failed while preparing to reopen image '%s'",
1390 reopen_state->bs->filename);
1391 }
1392 goto error;
1393 }
1394 } else {
1395 /* It is currently mandatory to have a bdrv_reopen_prepare()
1396 * handler for each supported drv. */
1397 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1398 drv->format_name, reopen_state->bs->device_name,
1399 "reopening of file");
1400 ret = -1;
1401 goto error;
1402 }
1403
1404 ret = 0;
1405
1406 error:
1407 return ret;
1408 }
1409
1410 /*
1411 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1412 * makes them final by swapping the staging BlockDriverState contents into
1413 * the active BlockDriverState contents.
1414 */
1415 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1416 {
1417 BlockDriver *drv;
1418
1419 assert(reopen_state != NULL);
1420 drv = reopen_state->bs->drv;
1421 assert(drv != NULL);
1422
1423 /* If there are any driver level actions to take */
1424 if (drv->bdrv_reopen_commit) {
1425 drv->bdrv_reopen_commit(reopen_state);
1426 }
1427
1428 /* set BDS specific flags now */
1429 reopen_state->bs->open_flags = reopen_state->flags;
1430 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1431 BDRV_O_CACHE_WB);
1432 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1433 }
1434
1435 /*
1436 * Abort the reopen, and delete and free the staged changes in
1437 * reopen_state
1438 */
1439 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1440 {
1441 BlockDriver *drv;
1442
1443 assert(reopen_state != NULL);
1444 drv = reopen_state->bs->drv;
1445 assert(drv != NULL);
1446
1447 if (drv->bdrv_reopen_abort) {
1448 drv->bdrv_reopen_abort(reopen_state);
1449 }
1450 }
1451
1452
1453 void bdrv_close(BlockDriverState *bs)
1454 {
1455 if (bs->job) {
1456 block_job_cancel_sync(bs->job);
1457 }
1458 bdrv_drain_all(); /* complete I/O */
1459 bdrv_flush(bs);
1460 bdrv_drain_all(); /* in case flush left pending I/O */
1461 notifier_list_notify(&bs->close_notifiers, bs);
1462
1463 if (bs->drv) {
1464 if (bs->backing_hd) {
1465 bdrv_unref(bs->backing_hd);
1466 bs->backing_hd = NULL;
1467 }
1468 bs->drv->bdrv_close(bs);
1469 g_free(bs->opaque);
1470 #ifdef _WIN32
1471 if (bs->is_temporary) {
1472 unlink(bs->filename);
1473 }
1474 #endif
1475 bs->opaque = NULL;
1476 bs->drv = NULL;
1477 bs->copy_on_read = 0;
1478 bs->backing_file[0] = '\0';
1479 bs->backing_format[0] = '\0';
1480 bs->total_sectors = 0;
1481 bs->encrypted = 0;
1482 bs->valid_key = 0;
1483 bs->sg = 0;
1484 bs->growable = 0;
1485 bs->zero_beyond_eof = false;
1486 QDECREF(bs->options);
1487 bs->options = NULL;
1488
1489 if (bs->file != NULL) {
1490 bdrv_unref(bs->file);
1491 bs->file = NULL;
1492 }
1493 }
1494
1495 bdrv_dev_change_media_cb(bs, false);
1496
1497 /*throttling disk I/O limits*/
1498 if (bs->io_limits_enabled) {
1499 bdrv_io_limits_disable(bs);
1500 }
1501 }
1502
1503 void bdrv_close_all(void)
1504 {
1505 BlockDriverState *bs;
1506
1507 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1508 bdrv_close(bs);
1509 }
1510 }
1511
1512 /* Check if any requests are in-flight (including throttled requests) */
1513 static bool bdrv_requests_pending(BlockDriverState *bs)
1514 {
1515 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1516 return true;
1517 }
1518 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1519 return true;
1520 }
1521 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1522 return true;
1523 }
1524 if (bs->file && bdrv_requests_pending(bs->file)) {
1525 return true;
1526 }
1527 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1528 return true;
1529 }
1530 return false;
1531 }
1532
1533 static bool bdrv_requests_pending_all(void)
1534 {
1535 BlockDriverState *bs;
1536 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1537 if (bdrv_requests_pending(bs)) {
1538 return true;
1539 }
1540 }
1541 return false;
1542 }
1543
1544 /*
1545 * Wait for pending requests to complete across all BlockDriverStates
1546 *
1547 * This function does not flush data to disk, use bdrv_flush_all() for that
1548 * after calling this function.
1549 *
1550 * Note that completion of an asynchronous I/O operation can trigger any
1551 * number of other I/O operations on other devices---for example a coroutine
1552 * can be arbitrarily complex and a constant flow of I/O can come until the
1553 * coroutine is complete. Because of this, it is not possible to have a
1554 * function to drain a single device's I/O queue.
1555 */
1556 void bdrv_drain_all(void)
1557 {
1558 /* Always run first iteration so any pending completion BHs run */
1559 bool busy = true;
1560 BlockDriverState *bs;
1561
1562 while (busy) {
1563 /* FIXME: We do not have timer support here, so this is effectively
1564 * a busy wait.
1565 */
1566 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1567 if (bdrv_start_throttled_reqs(bs)) {
1568 busy = true;
1569 }
1570 }
1571
1572 busy = bdrv_requests_pending_all();
1573 busy |= aio_poll(qemu_get_aio_context(), busy);
1574 }
1575 }
1576
1577 /* make a BlockDriverState anonymous by removing from bdrv_state list.
1578 Also, NULL terminate the device_name to prevent double remove */
1579 void bdrv_make_anon(BlockDriverState *bs)
1580 {
1581 if (bs->device_name[0] != '\0') {
1582 QTAILQ_REMOVE(&bdrv_states, bs, list);
1583 }
1584 bs->device_name[0] = '\0';
1585 }
1586
1587 static void bdrv_rebind(BlockDriverState *bs)
1588 {
1589 if (bs->drv && bs->drv->bdrv_rebind) {
1590 bs->drv->bdrv_rebind(bs);
1591 }
1592 }
1593
1594 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1595 BlockDriverState *bs_src)
1596 {
1597 /* move some fields that need to stay attached to the device */
1598 bs_dest->open_flags = bs_src->open_flags;
1599
1600 /* dev info */
1601 bs_dest->dev_ops = bs_src->dev_ops;
1602 bs_dest->dev_opaque = bs_src->dev_opaque;
1603 bs_dest->dev = bs_src->dev;
1604 bs_dest->buffer_alignment = bs_src->buffer_alignment;
1605 bs_dest->copy_on_read = bs_src->copy_on_read;
1606
1607 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1608
1609 /* i/o throttled req */
1610 memcpy(&bs_dest->throttle_state,
1611 &bs_src->throttle_state,
1612 sizeof(ThrottleState));
1613 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1614 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1615 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1616
1617 /* r/w error */
1618 bs_dest->on_read_error = bs_src->on_read_error;
1619 bs_dest->on_write_error = bs_src->on_write_error;
1620
1621 /* i/o status */
1622 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1623 bs_dest->iostatus = bs_src->iostatus;
1624
1625 /* dirty bitmap */
1626 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1627
1628 /* reference count */
1629 bs_dest->refcnt = bs_src->refcnt;
1630
1631 /* job */
1632 bs_dest->in_use = bs_src->in_use;
1633 bs_dest->job = bs_src->job;
1634
1635 /* keep the same entry in bdrv_states */
1636 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1637 bs_src->device_name);
1638 bs_dest->list = bs_src->list;
1639 }
1640
1641 /*
1642 * Swap bs contents for two image chains while they are live,
1643 * while keeping required fields on the BlockDriverState that is
1644 * actually attached to a device.
1645 *
1646 * This will modify the BlockDriverState fields, and swap contents
1647 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1648 *
1649 * bs_new is required to be anonymous.
1650 *
1651 * This function does not create any image files.
1652 */
1653 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
1654 {
1655 BlockDriverState tmp;
1656
1657 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
1658 assert(bs_new->device_name[0] == '\0');
1659 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
1660 assert(bs_new->job == NULL);
1661 assert(bs_new->dev == NULL);
1662 assert(bs_new->in_use == 0);
1663 assert(bs_new->io_limits_enabled == false);
1664 assert(!throttle_have_timer(&bs_new->throttle_state));
1665
1666 tmp = *bs_new;
1667 *bs_new = *bs_old;
1668 *bs_old = tmp;
1669
1670 /* there are some fields that should not be swapped, move them back */
1671 bdrv_move_feature_fields(&tmp, bs_old);
1672 bdrv_move_feature_fields(bs_old, bs_new);
1673 bdrv_move_feature_fields(bs_new, &tmp);
1674
1675 /* bs_new shouldn't be in bdrv_states even after the swap! */
1676 assert(bs_new->device_name[0] == '\0');
1677
1678 /* Check a few fields that should remain attached to the device */
1679 assert(bs_new->dev == NULL);
1680 assert(bs_new->job == NULL);
1681 assert(bs_new->in_use == 0);
1682 assert(bs_new->io_limits_enabled == false);
1683 assert(!throttle_have_timer(&bs_new->throttle_state));
1684
1685 bdrv_rebind(bs_new);
1686 bdrv_rebind(bs_old);
1687 }
1688
1689 /*
1690 * Add new bs contents at the top of an image chain while the chain is
1691 * live, while keeping required fields on the top layer.
1692 *
1693 * This will modify the BlockDriverState fields, and swap contents
1694 * between bs_new and bs_top. Both bs_new and bs_top are modified.
1695 *
1696 * bs_new is required to be anonymous.
1697 *
1698 * This function does not create any image files.
1699 */
1700 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
1701 {
1702 bdrv_swap(bs_new, bs_top);
1703
1704 /* The contents of 'tmp' will become bs_top, as we are
1705 * swapping bs_new and bs_top contents. */
1706 bs_top->backing_hd = bs_new;
1707 bs_top->open_flags &= ~BDRV_O_NO_BACKING;
1708 pstrcpy(bs_top->backing_file, sizeof(bs_top->backing_file),
1709 bs_new->filename);
1710 pstrcpy(bs_top->backing_format, sizeof(bs_top->backing_format),
1711 bs_new->drv ? bs_new->drv->format_name : "");
1712 }
1713
1714 static void bdrv_delete(BlockDriverState *bs)
1715 {
1716 assert(!bs->dev);
1717 assert(!bs->job);
1718 assert(!bs->in_use);
1719 assert(!bs->refcnt);
1720 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
1721
1722 bdrv_close(bs);
1723
1724 /* remove from list, if necessary */
1725 bdrv_make_anon(bs);
1726
1727 g_free(bs);
1728 }
1729
1730 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
1731 /* TODO change to DeviceState *dev when all users are qdevified */
1732 {
1733 if (bs->dev) {
1734 return -EBUSY;
1735 }
1736 bs->dev = dev;
1737 bdrv_iostatus_reset(bs);
1738 return 0;
1739 }
1740
1741 /* TODO qdevified devices don't use this, remove when devices are qdevified */
1742 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
1743 {
1744 if (bdrv_attach_dev(bs, dev) < 0) {
1745 abort();
1746 }
1747 }
1748
1749 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
1750 /* TODO change to DeviceState *dev when all users are qdevified */
1751 {
1752 assert(bs->dev == dev);
1753 bs->dev = NULL;
1754 bs->dev_ops = NULL;
1755 bs->dev_opaque = NULL;
1756 bs->buffer_alignment = 512;
1757 }
1758
1759 /* TODO change to return DeviceState * when all users are qdevified */
1760 void *bdrv_get_attached_dev(BlockDriverState *bs)
1761 {
1762 return bs->dev;
1763 }
1764
1765 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
1766 void *opaque)
1767 {
1768 bs->dev_ops = ops;
1769 bs->dev_opaque = opaque;
1770 }
1771
1772 void bdrv_emit_qmp_error_event(const BlockDriverState *bdrv,
1773 enum MonitorEvent ev,
1774 BlockErrorAction action, bool is_read)
1775 {
1776 QObject *data;
1777 const char *action_str;
1778
1779 switch (action) {
1780 case BDRV_ACTION_REPORT:
1781 action_str = "report";
1782 break;
1783 case BDRV_ACTION_IGNORE:
1784 action_str = "ignore";
1785 break;
1786 case BDRV_ACTION_STOP:
1787 action_str = "stop";
1788 break;
1789 default:
1790 abort();
1791 }
1792
1793 data = qobject_from_jsonf("{ 'device': %s, 'action': %s, 'operation': %s }",
1794 bdrv->device_name,
1795 action_str,
1796 is_read ? "read" : "write");
1797 monitor_protocol_event(ev, data);
1798
1799 qobject_decref(data);
1800 }
1801
1802 static void bdrv_emit_qmp_eject_event(BlockDriverState *bs, bool ejected)
1803 {
1804 QObject *data;
1805
1806 data = qobject_from_jsonf("{ 'device': %s, 'tray-open': %i }",
1807 bdrv_get_device_name(bs), ejected);
1808 monitor_protocol_event(QEVENT_DEVICE_TRAY_MOVED, data);
1809
1810 qobject_decref(data);
1811 }
1812
1813 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
1814 {
1815 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
1816 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
1817 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
1818 if (tray_was_closed) {
1819 /* tray open */
1820 bdrv_emit_qmp_eject_event(bs, true);
1821 }
1822 if (load) {
1823 /* tray close */
1824 bdrv_emit_qmp_eject_event(bs, false);
1825 }
1826 }
1827 }
1828
1829 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
1830 {
1831 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
1832 }
1833
1834 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
1835 {
1836 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
1837 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
1838 }
1839 }
1840
1841 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
1842 {
1843 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
1844 return bs->dev_ops->is_tray_open(bs->dev_opaque);
1845 }
1846 return false;
1847 }
1848
1849 static void bdrv_dev_resize_cb(BlockDriverState *bs)
1850 {
1851 if (bs->dev_ops && bs->dev_ops->resize_cb) {
1852 bs->dev_ops->resize_cb(bs->dev_opaque);
1853 }
1854 }
1855
1856 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
1857 {
1858 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
1859 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
1860 }
1861 return false;
1862 }
1863
1864 /*
1865 * Run consistency checks on an image
1866 *
1867 * Returns 0 if the check could be completed (it doesn't mean that the image is
1868 * free of errors) or -errno when an internal error occurred. The results of the
1869 * check are stored in res.
1870 */
1871 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
1872 {
1873 if (bs->drv->bdrv_check == NULL) {
1874 return -ENOTSUP;
1875 }
1876
1877 memset(res, 0, sizeof(*res));
1878 return bs->drv->bdrv_check(bs, res, fix);
1879 }
1880
1881 #define COMMIT_BUF_SECTORS 2048
1882
1883 /* commit COW file into the raw image */
1884 int bdrv_commit(BlockDriverState *bs)
1885 {
1886 BlockDriver *drv = bs->drv;
1887 int64_t sector, total_sectors;
1888 int n, ro, open_flags;
1889 int ret = 0;
1890 uint8_t *buf;
1891 char filename[PATH_MAX];
1892
1893 if (!drv)
1894 return -ENOMEDIUM;
1895
1896 if (!bs->backing_hd) {
1897 return -ENOTSUP;
1898 }
1899
1900 if (bdrv_in_use(bs) || bdrv_in_use(bs->backing_hd)) {
1901 return -EBUSY;
1902 }
1903
1904 ro = bs->backing_hd->read_only;
1905 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
1906 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
1907 open_flags = bs->backing_hd->open_flags;
1908
1909 if (ro) {
1910 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
1911 return -EACCES;
1912 }
1913 }
1914
1915 total_sectors = bdrv_getlength(bs) >> BDRV_SECTOR_BITS;
1916 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
1917
1918 for (sector = 0; sector < total_sectors; sector += n) {
1919 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
1920 if (ret < 0) {
1921 goto ro_cleanup;
1922 }
1923 if (ret) {
1924 if (bdrv_read(bs, sector, buf, n) != 0) {
1925 ret = -EIO;
1926 goto ro_cleanup;
1927 }
1928
1929 if (bdrv_write(bs->backing_hd, sector, buf, n) != 0) {
1930 ret = -EIO;
1931 goto ro_cleanup;
1932 }
1933 }
1934 }
1935
1936 if (drv->bdrv_make_empty) {
1937 ret = drv->bdrv_make_empty(bs);
1938 bdrv_flush(bs);
1939 }
1940
1941 /*
1942 * Make sure all data we wrote to the backing device is actually
1943 * stable on disk.
1944 */
1945 if (bs->backing_hd)
1946 bdrv_flush(bs->backing_hd);
1947
1948 ro_cleanup:
1949 g_free(buf);
1950
1951 if (ro) {
1952 /* ignoring error return here */
1953 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
1954 }
1955
1956 return ret;
1957 }
1958
1959 int bdrv_commit_all(void)
1960 {
1961 BlockDriverState *bs;
1962
1963 QTAILQ_FOREACH(bs, &bdrv_states, list) {
1964 if (bs->drv && bs->backing_hd) {
1965 int ret = bdrv_commit(bs);
1966 if (ret < 0) {
1967 return ret;
1968 }
1969 }
1970 }
1971 return 0;
1972 }
1973
1974 /**
1975 * Remove an active request from the tracked requests list
1976 *
1977 * This function should be called when a tracked request is completing.
1978 */
1979 static void tracked_request_end(BdrvTrackedRequest *req)
1980 {
1981 QLIST_REMOVE(req, list);
1982 qemu_co_queue_restart_all(&req->wait_queue);
1983 }
1984
1985 /**
1986 * Add an active request to the tracked requests list
1987 */
1988 static void tracked_request_begin(BdrvTrackedRequest *req,
1989 BlockDriverState *bs,
1990 int64_t sector_num,
1991 int nb_sectors, bool is_write)
1992 {
1993 *req = (BdrvTrackedRequest){
1994 .bs = bs,
1995 .sector_num = sector_num,
1996 .nb_sectors = nb_sectors,
1997 .is_write = is_write,
1998 .co = qemu_coroutine_self(),
1999 };
2000
2001 qemu_co_queue_init(&req->wait_queue);
2002
2003 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2004 }
2005
2006 /**
2007 * Round a region to cluster boundaries
2008 */
2009 void bdrv_round_to_clusters(BlockDriverState *bs,
2010 int64_t sector_num, int nb_sectors,
2011 int64_t *cluster_sector_num,
2012 int *cluster_nb_sectors)
2013 {
2014 BlockDriverInfo bdi;
2015
2016 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2017 *cluster_sector_num = sector_num;
2018 *cluster_nb_sectors = nb_sectors;
2019 } else {
2020 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2021 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2022 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2023 nb_sectors, c);
2024 }
2025 }
2026
2027 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2028 int64_t sector_num, int nb_sectors) {
2029 /* aaaa bbbb */
2030 if (sector_num >= req->sector_num + req->nb_sectors) {
2031 return false;
2032 }
2033 /* bbbb aaaa */
2034 if (req->sector_num >= sector_num + nb_sectors) {
2035 return false;
2036 }
2037 return true;
2038 }
2039
2040 static void coroutine_fn wait_for_overlapping_requests(BlockDriverState *bs,
2041 int64_t sector_num, int nb_sectors)
2042 {
2043 BdrvTrackedRequest *req;
2044 int64_t cluster_sector_num;
2045 int cluster_nb_sectors;
2046 bool retry;
2047
2048 /* If we touch the same cluster it counts as an overlap. This guarantees
2049 * that allocating writes will be serialized and not race with each other
2050 * for the same cluster. For example, in copy-on-read it ensures that the
2051 * CoR read and write operations are atomic and guest writes cannot
2052 * interleave between them.
2053 */
2054 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2055 &cluster_sector_num, &cluster_nb_sectors);
2056
2057 do {
2058 retry = false;
2059 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2060 if (tracked_request_overlaps(req, cluster_sector_num,
2061 cluster_nb_sectors)) {
2062 /* Hitting this means there was a reentrant request, for
2063 * example, a block driver issuing nested requests. This must
2064 * never happen since it means deadlock.
2065 */
2066 assert(qemu_coroutine_self() != req->co);
2067
2068 qemu_co_queue_wait(&req->wait_queue);
2069 retry = true;
2070 break;
2071 }
2072 }
2073 } while (retry);
2074 }
2075
2076 /*
2077 * Return values:
2078 * 0 - success
2079 * -EINVAL - backing format specified, but no file
2080 * -ENOSPC - can't update the backing file because no space is left in the
2081 * image file header
2082 * -ENOTSUP - format driver doesn't support changing the backing file
2083 */
2084 int bdrv_change_backing_file(BlockDriverState *bs,
2085 const char *backing_file, const char *backing_fmt)
2086 {
2087 BlockDriver *drv = bs->drv;
2088 int ret;
2089
2090 /* Backing file format doesn't make sense without a backing file */
2091 if (backing_fmt && !backing_file) {
2092 return -EINVAL;
2093 }
2094
2095 if (drv->bdrv_change_backing_file != NULL) {
2096 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2097 } else {
2098 ret = -ENOTSUP;
2099 }
2100
2101 if (ret == 0) {
2102 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2103 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2104 }
2105 return ret;
2106 }
2107
2108 /*
2109 * Finds the image layer in the chain that has 'bs' as its backing file.
2110 *
2111 * active is the current topmost image.
2112 *
2113 * Returns NULL if bs is not found in active's image chain,
2114 * or if active == bs.
2115 */
2116 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2117 BlockDriverState *bs)
2118 {
2119 BlockDriverState *overlay = NULL;
2120 BlockDriverState *intermediate;
2121
2122 assert(active != NULL);
2123 assert(bs != NULL);
2124
2125 /* if bs is the same as active, then by definition it has no overlay
2126 */
2127 if (active == bs) {
2128 return NULL;
2129 }
2130
2131 intermediate = active;
2132 while (intermediate->backing_hd) {
2133 if (intermediate->backing_hd == bs) {
2134 overlay = intermediate;
2135 break;
2136 }
2137 intermediate = intermediate->backing_hd;
2138 }
2139
2140 return overlay;
2141 }
2142
2143 typedef struct BlkIntermediateStates {
2144 BlockDriverState *bs;
2145 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2146 } BlkIntermediateStates;
2147
2148
2149 /*
2150 * Drops images above 'base' up to and including 'top', and sets the image
2151 * above 'top' to have base as its backing file.
2152 *
2153 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2154 * information in 'bs' can be properly updated.
2155 *
2156 * E.g., this will convert the following chain:
2157 * bottom <- base <- intermediate <- top <- active
2158 *
2159 * to
2160 *
2161 * bottom <- base <- active
2162 *
2163 * It is allowed for bottom==base, in which case it converts:
2164 *
2165 * base <- intermediate <- top <- active
2166 *
2167 * to
2168 *
2169 * base <- active
2170 *
2171 * Error conditions:
2172 * if active == top, that is considered an error
2173 *
2174 */
2175 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2176 BlockDriverState *base)
2177 {
2178 BlockDriverState *intermediate;
2179 BlockDriverState *base_bs = NULL;
2180 BlockDriverState *new_top_bs = NULL;
2181 BlkIntermediateStates *intermediate_state, *next;
2182 int ret = -EIO;
2183
2184 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2185 QSIMPLEQ_INIT(&states_to_delete);
2186
2187 if (!top->drv || !base->drv) {
2188 goto exit;
2189 }
2190
2191 new_top_bs = bdrv_find_overlay(active, top);
2192
2193 if (new_top_bs == NULL) {
2194 /* we could not find the image above 'top', this is an error */
2195 goto exit;
2196 }
2197
2198 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2199 * to do, no intermediate images */
2200 if (new_top_bs->backing_hd == base) {
2201 ret = 0;
2202 goto exit;
2203 }
2204
2205 intermediate = top;
2206
2207 /* now we will go down through the list, and add each BDS we find
2208 * into our deletion queue, until we hit the 'base'
2209 */
2210 while (intermediate) {
2211 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2212 intermediate_state->bs = intermediate;
2213 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2214
2215 if (intermediate->backing_hd == base) {
2216 base_bs = intermediate->backing_hd;
2217 break;
2218 }
2219 intermediate = intermediate->backing_hd;
2220 }
2221 if (base_bs == NULL) {
2222 /* something went wrong, we did not end at the base. safely
2223 * unravel everything, and exit with error */
2224 goto exit;
2225 }
2226
2227 /* success - we can delete the intermediate states, and link top->base */
2228 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2229 base_bs->drv ? base_bs->drv->format_name : "");
2230 if (ret) {
2231 goto exit;
2232 }
2233 new_top_bs->backing_hd = base_bs;
2234
2235
2236 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2237 /* so that bdrv_close() does not recursively close the chain */
2238 intermediate_state->bs->backing_hd = NULL;
2239 bdrv_unref(intermediate_state->bs);
2240 }
2241 ret = 0;
2242
2243 exit:
2244 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2245 g_free(intermediate_state);
2246 }
2247 return ret;
2248 }
2249
2250
2251 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2252 size_t size)
2253 {
2254 int64_t len;
2255
2256 if (!bdrv_is_inserted(bs))
2257 return -ENOMEDIUM;
2258
2259 if (bs->growable)
2260 return 0;
2261
2262 len = bdrv_getlength(bs);
2263
2264 if (offset < 0)
2265 return -EIO;
2266
2267 if ((offset > len) || (len - offset < size))
2268 return -EIO;
2269
2270 return 0;
2271 }
2272
2273 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2274 int nb_sectors)
2275 {
2276 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2277 nb_sectors * BDRV_SECTOR_SIZE);
2278 }
2279
2280 typedef struct RwCo {
2281 BlockDriverState *bs;
2282 int64_t sector_num;
2283 int nb_sectors;
2284 QEMUIOVector *qiov;
2285 bool is_write;
2286 int ret;
2287 BdrvRequestFlags flags;
2288 } RwCo;
2289
2290 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2291 {
2292 RwCo *rwco = opaque;
2293
2294 if (!rwco->is_write) {
2295 rwco->ret = bdrv_co_do_readv(rwco->bs, rwco->sector_num,
2296 rwco->nb_sectors, rwco->qiov,
2297 rwco->flags);
2298 } else {
2299 rwco->ret = bdrv_co_do_writev(rwco->bs, rwco->sector_num,
2300 rwco->nb_sectors, rwco->qiov,
2301 rwco->flags);
2302 }
2303 }
2304
2305 /*
2306 * Process a vectored synchronous request using coroutines
2307 */
2308 static int bdrv_rwv_co(BlockDriverState *bs, int64_t sector_num,
2309 QEMUIOVector *qiov, bool is_write,
2310 BdrvRequestFlags flags)
2311 {
2312 Coroutine *co;
2313 RwCo rwco = {
2314 .bs = bs,
2315 .sector_num = sector_num,
2316 .nb_sectors = qiov->size >> BDRV_SECTOR_BITS,
2317 .qiov = qiov,
2318 .is_write = is_write,
2319 .ret = NOT_DONE,
2320 .flags = flags,
2321 };
2322 assert((qiov->size & (BDRV_SECTOR_SIZE - 1)) == 0);
2323
2324 /**
2325 * In sync call context, when the vcpu is blocked, this throttling timer
2326 * will not fire; so the I/O throttling function has to be disabled here
2327 * if it has been enabled.
2328 */
2329 if (bs->io_limits_enabled) {
2330 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2331 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2332 bdrv_io_limits_disable(bs);
2333 }
2334
2335 if (qemu_in_coroutine()) {
2336 /* Fast-path if already in coroutine context */
2337 bdrv_rw_co_entry(&rwco);
2338 } else {
2339 co = qemu_coroutine_create(bdrv_rw_co_entry);
2340 qemu_coroutine_enter(co, &rwco);
2341 while (rwco.ret == NOT_DONE) {
2342 qemu_aio_wait();
2343 }
2344 }
2345 return rwco.ret;
2346 }
2347
2348 /*
2349 * Process a synchronous request using coroutines
2350 */
2351 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2352 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2353 {
2354 QEMUIOVector qiov;
2355 struct iovec iov = {
2356 .iov_base = (void *)buf,
2357 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2358 };
2359
2360 qemu_iovec_init_external(&qiov, &iov, 1);
2361 return bdrv_rwv_co(bs, sector_num, &qiov, is_write, flags);
2362 }
2363
2364 /* return < 0 if error. See bdrv_write() for the return codes */
2365 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2366 uint8_t *buf, int nb_sectors)
2367 {
2368 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2369 }
2370
2371 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2372 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2373 uint8_t *buf, int nb_sectors)
2374 {
2375 bool enabled;
2376 int ret;
2377
2378 enabled = bs->io_limits_enabled;
2379 bs->io_limits_enabled = false;
2380 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2381 bs->io_limits_enabled = enabled;
2382 return ret;
2383 }
2384
2385 /* Return < 0 if error. Important errors are:
2386 -EIO generic I/O error (may happen for all errors)
2387 -ENOMEDIUM No media inserted.
2388 -EINVAL Invalid sector number or nb_sectors
2389 -EACCES Trying to write a read-only device
2390 */
2391 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2392 const uint8_t *buf, int nb_sectors)
2393 {
2394 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2395 }
2396
2397 int bdrv_writev(BlockDriverState *bs, int64_t sector_num, QEMUIOVector *qiov)
2398 {
2399 return bdrv_rwv_co(bs, sector_num, qiov, true, 0);
2400 }
2401
2402 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2403 int nb_sectors, BdrvRequestFlags flags)
2404 {
2405 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2406 BDRV_REQ_ZERO_WRITE | flags);
2407 }
2408
2409 /*
2410 * Completely zero out a block device with the help of bdrv_write_zeroes.
2411 * The operation is sped up by checking the block status and only writing
2412 * zeroes to the device if they currently do not return zeroes. Optional
2413 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2414 *
2415 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2416 */
2417 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2418 {
2419 int64_t target_size = bdrv_getlength(bs) / BDRV_SECTOR_SIZE;
2420 int64_t ret, nb_sectors, sector_num = 0;
2421 int n;
2422
2423 for (;;) {
2424 nb_sectors = target_size - sector_num;
2425 if (nb_sectors <= 0) {
2426 return 0;
2427 }
2428 if (nb_sectors > INT_MAX) {
2429 nb_sectors = INT_MAX;
2430 }
2431 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2432 if (ret & BDRV_BLOCK_ZERO) {
2433 sector_num += n;
2434 continue;
2435 }
2436 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2437 if (ret < 0) {
2438 error_report("error writing zeroes at sector %" PRId64 ": %s",
2439 sector_num, strerror(-ret));
2440 return ret;
2441 }
2442 sector_num += n;
2443 }
2444 }
2445
2446 int bdrv_pread(BlockDriverState *bs, int64_t offset,
2447 void *buf, int count1)
2448 {
2449 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2450 int len, nb_sectors, count;
2451 int64_t sector_num;
2452 int ret;
2453
2454 count = count1;
2455 /* first read to align to sector start */
2456 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2457 if (len > count)
2458 len = count;
2459 sector_num = offset >> BDRV_SECTOR_BITS;
2460 if (len > 0) {
2461 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2462 return ret;
2463 memcpy(buf, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)), len);
2464 count -= len;
2465 if (count == 0)
2466 return count1;
2467 sector_num++;
2468 buf += len;
2469 }
2470
2471 /* read the sectors "in place" */
2472 nb_sectors = count >> BDRV_SECTOR_BITS;
2473 if (nb_sectors > 0) {
2474 if ((ret = bdrv_read(bs, sector_num, buf, nb_sectors)) < 0)
2475 return ret;
2476 sector_num += nb_sectors;
2477 len = nb_sectors << BDRV_SECTOR_BITS;
2478 buf += len;
2479 count -= len;
2480 }
2481
2482 /* add data from the last sector */
2483 if (count > 0) {
2484 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2485 return ret;
2486 memcpy(buf, tmp_buf, count);
2487 }
2488 return count1;
2489 }
2490
2491 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2492 {
2493 uint8_t tmp_buf[BDRV_SECTOR_SIZE];
2494 int len, nb_sectors, count;
2495 int64_t sector_num;
2496 int ret;
2497
2498 count = qiov->size;
2499
2500 /* first write to align to sector start */
2501 len = (BDRV_SECTOR_SIZE - offset) & (BDRV_SECTOR_SIZE - 1);
2502 if (len > count)
2503 len = count;
2504 sector_num = offset >> BDRV_SECTOR_BITS;
2505 if (len > 0) {
2506 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2507 return ret;
2508 qemu_iovec_to_buf(qiov, 0, tmp_buf + (offset & (BDRV_SECTOR_SIZE - 1)),
2509 len);
2510 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2511 return ret;
2512 count -= len;
2513 if (count == 0)
2514 return qiov->size;
2515 sector_num++;
2516 }
2517
2518 /* write the sectors "in place" */
2519 nb_sectors = count >> BDRV_SECTOR_BITS;
2520 if (nb_sectors > 0) {
2521 QEMUIOVector qiov_inplace;
2522
2523 qemu_iovec_init(&qiov_inplace, qiov->niov);
2524 qemu_iovec_concat(&qiov_inplace, qiov, len,
2525 nb_sectors << BDRV_SECTOR_BITS);
2526 ret = bdrv_writev(bs, sector_num, &qiov_inplace);
2527 qemu_iovec_destroy(&qiov_inplace);
2528 if (ret < 0) {
2529 return ret;
2530 }
2531
2532 sector_num += nb_sectors;
2533 len = nb_sectors << BDRV_SECTOR_BITS;
2534 count -= len;
2535 }
2536
2537 /* add data from the last sector */
2538 if (count > 0) {
2539 if ((ret = bdrv_read(bs, sector_num, tmp_buf, 1)) < 0)
2540 return ret;
2541 qemu_iovec_to_buf(qiov, qiov->size - count, tmp_buf, count);
2542 if ((ret = bdrv_write(bs, sector_num, tmp_buf, 1)) < 0)
2543 return ret;
2544 }
2545 return qiov->size;
2546 }
2547
2548 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2549 const void *buf, int count1)
2550 {
2551 QEMUIOVector qiov;
2552 struct iovec iov = {
2553 .iov_base = (void *) buf,
2554 .iov_len = count1,
2555 };
2556
2557 qemu_iovec_init_external(&qiov, &iov, 1);
2558 return bdrv_pwritev(bs, offset, &qiov);
2559 }
2560
2561 /*
2562 * Writes to the file and ensures that no writes are reordered across this
2563 * request (acts as a barrier)
2564 *
2565 * Returns 0 on success, -errno in error cases.
2566 */
2567 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2568 const void *buf, int count)
2569 {
2570 int ret;
2571
2572 ret = bdrv_pwrite(bs, offset, buf, count);
2573 if (ret < 0) {
2574 return ret;
2575 }
2576
2577 /* No flush needed for cache modes that already do it */
2578 if (bs->enable_write_cache) {
2579 bdrv_flush(bs);
2580 }
2581
2582 return 0;
2583 }
2584
2585 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2586 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2587 {
2588 /* Perform I/O through a temporary buffer so that users who scribble over
2589 * their read buffer while the operation is in progress do not end up
2590 * modifying the image file. This is critical for zero-copy guest I/O
2591 * where anything might happen inside guest memory.
2592 */
2593 void *bounce_buffer;
2594
2595 BlockDriver *drv = bs->drv;
2596 struct iovec iov;
2597 QEMUIOVector bounce_qiov;
2598 int64_t cluster_sector_num;
2599 int cluster_nb_sectors;
2600 size_t skip_bytes;
2601 int ret;
2602
2603 /* Cover entire cluster so no additional backing file I/O is required when
2604 * allocating cluster in the image file.
2605 */
2606 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2607 &cluster_sector_num, &cluster_nb_sectors);
2608
2609 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2610 cluster_sector_num, cluster_nb_sectors);
2611
2612 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2613 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2614 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2615
2616 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2617 &bounce_qiov);
2618 if (ret < 0) {
2619 goto err;
2620 }
2621
2622 if (drv->bdrv_co_write_zeroes &&
2623 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2624 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2625 cluster_nb_sectors, 0);
2626 } else {
2627 /* This does not change the data on the disk, it is not necessary
2628 * to flush even in cache=writethrough mode.
2629 */
2630 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2631 &bounce_qiov);
2632 }
2633
2634 if (ret < 0) {
2635 /* It might be okay to ignore write errors for guest requests. If this
2636 * is a deliberate copy-on-read then we don't want to ignore the error.
2637 * Simply report it in all cases.
2638 */
2639 goto err;
2640 }
2641
2642 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2643 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2644 nb_sectors * BDRV_SECTOR_SIZE);
2645
2646 err:
2647 qemu_vfree(bounce_buffer);
2648 return ret;
2649 }
2650
2651 /*
2652 * Handle a read request in coroutine context
2653 */
2654 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
2655 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2656 BdrvRequestFlags flags)
2657 {
2658 BlockDriver *drv = bs->drv;
2659 BdrvTrackedRequest req;
2660 int ret;
2661
2662 if (!drv) {
2663 return -ENOMEDIUM;
2664 }
2665 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2666 return -EIO;
2667 }
2668
2669 if (bs->copy_on_read) {
2670 flags |= BDRV_REQ_COPY_ON_READ;
2671 }
2672 if (flags & BDRV_REQ_COPY_ON_READ) {
2673 bs->copy_on_read_in_flight++;
2674 }
2675
2676 if (bs->copy_on_read_in_flight) {
2677 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2678 }
2679
2680 /* throttling disk I/O */
2681 if (bs->io_limits_enabled) {
2682 bdrv_io_limits_intercept(bs, nb_sectors, false);
2683 }
2684
2685 tracked_request_begin(&req, bs, sector_num, nb_sectors, false);
2686
2687 if (flags & BDRV_REQ_COPY_ON_READ) {
2688 int pnum;
2689
2690 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
2691 if (ret < 0) {
2692 goto out;
2693 }
2694
2695 if (!ret || pnum != nb_sectors) {
2696 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
2697 goto out;
2698 }
2699 }
2700
2701 if (!(bs->zero_beyond_eof && bs->growable)) {
2702 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
2703 } else {
2704 /* Read zeros after EOF of growable BDSes */
2705 int64_t len, total_sectors, max_nb_sectors;
2706
2707 len = bdrv_getlength(bs);
2708 if (len < 0) {
2709 ret = len;
2710 goto out;
2711 }
2712
2713 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
2714 max_nb_sectors = MAX(0, total_sectors - sector_num);
2715 if (max_nb_sectors > 0) {
2716 ret = drv->bdrv_co_readv(bs, sector_num,
2717 MIN(nb_sectors, max_nb_sectors), qiov);
2718 } else {
2719 ret = 0;
2720 }
2721
2722 /* Reading beyond end of file is supposed to produce zeroes */
2723 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
2724 uint64_t offset = MAX(0, total_sectors - sector_num);
2725 uint64_t bytes = (sector_num + nb_sectors - offset) *
2726 BDRV_SECTOR_SIZE;
2727 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
2728 }
2729 }
2730
2731 out:
2732 tracked_request_end(&req);
2733
2734 if (flags & BDRV_REQ_COPY_ON_READ) {
2735 bs->copy_on_read_in_flight--;
2736 }
2737
2738 return ret;
2739 }
2740
2741 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
2742 int nb_sectors, QEMUIOVector *qiov)
2743 {
2744 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
2745
2746 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
2747 }
2748
2749 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
2750 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2751 {
2752 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
2753
2754 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
2755 BDRV_REQ_COPY_ON_READ);
2756 }
2757
2758 /* if no limit is specified in the BlockLimits use a default
2759 * of 32768 512-byte sectors (16 MiB) per request.
2760 */
2761 #define MAX_WRITE_ZEROES_DEFAULT 32768
2762
2763 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
2764 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
2765 {
2766 BlockDriver *drv = bs->drv;
2767 QEMUIOVector qiov;
2768 struct iovec iov = {0};
2769 int ret = 0;
2770
2771 int max_write_zeroes = bs->bl.max_write_zeroes ?
2772 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
2773
2774 while (nb_sectors > 0 && !ret) {
2775 int num = nb_sectors;
2776
2777 /* align request */
2778 if (bs->bl.write_zeroes_alignment &&
2779 num >= bs->bl.write_zeroes_alignment &&
2780 sector_num % bs->bl.write_zeroes_alignment) {
2781 if (num > bs->bl.write_zeroes_alignment) {
2782 num = bs->bl.write_zeroes_alignment;
2783 }
2784 num -= sector_num % bs->bl.write_zeroes_alignment;
2785 }
2786
2787 /* limit request size */
2788 if (num > max_write_zeroes) {
2789 num = max_write_zeroes;
2790 }
2791
2792 ret = -ENOTSUP;
2793 /* First try the efficient write zeroes operation */
2794 if (drv->bdrv_co_write_zeroes) {
2795 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
2796 }
2797
2798 if (ret == -ENOTSUP) {
2799 /* Fall back to bounce buffer if write zeroes is unsupported */
2800 iov.iov_len = num * BDRV_SECTOR_SIZE;
2801 if (iov.iov_base == NULL) {
2802 /* allocate bounce buffer only once and ensure that it
2803 * is big enough for this and all future requests.
2804 */
2805 size_t bufsize = num <= nb_sectors ? num : max_write_zeroes;
2806 iov.iov_base = qemu_blockalign(bs, bufsize * BDRV_SECTOR_SIZE);
2807 memset(iov.iov_base, 0, bufsize * BDRV_SECTOR_SIZE);
2808 }
2809 qemu_iovec_init_external(&qiov, &iov, 1);
2810
2811 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
2812 }
2813
2814 sector_num += num;
2815 nb_sectors -= num;
2816 }
2817
2818 qemu_vfree(iov.iov_base);
2819 return ret;
2820 }
2821
2822 /*
2823 * Handle a write request in coroutine context
2824 */
2825 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
2826 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
2827 BdrvRequestFlags flags)
2828 {
2829 BlockDriver *drv = bs->drv;
2830 BdrvTrackedRequest req;
2831 int ret;
2832
2833 if (!bs->drv) {
2834 return -ENOMEDIUM;
2835 }
2836 if (bs->read_only) {
2837 return -EACCES;
2838 }
2839 if (bdrv_check_request(bs, sector_num, nb_sectors)) {
2840 return -EIO;
2841 }
2842
2843 if (bs->copy_on_read_in_flight) {
2844 wait_for_overlapping_requests(bs, sector_num, nb_sectors);
2845 }
2846
2847 /* throttling disk I/O */
2848 if (bs->io_limits_enabled) {
2849 bdrv_io_limits_intercept(bs, nb_sectors, true);
2850 }
2851
2852 tracked_request_begin(&req, bs, sector_num, nb_sectors, true);
2853
2854 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, &req);
2855
2856 if (ret < 0) {
2857 /* Do nothing, write notifier decided to fail this request */
2858 } else if (flags & BDRV_REQ_ZERO_WRITE) {
2859 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
2860 } else {
2861 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
2862 }
2863
2864 if (ret == 0 && !bs->enable_write_cache) {
2865 ret = bdrv_co_flush(bs);
2866 }
2867
2868 bdrv_set_dirty(bs, sector_num, nb_sectors);
2869
2870 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
2871 bs->wr_highest_sector = sector_num + nb_sectors - 1;
2872 }
2873 if (bs->growable && ret >= 0) {
2874 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
2875 }
2876
2877 tracked_request_end(&req);
2878
2879 return ret;
2880 }
2881
2882 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
2883 int nb_sectors, QEMUIOVector *qiov)
2884 {
2885 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
2886
2887 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
2888 }
2889
2890 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
2891 int64_t sector_num, int nb_sectors,
2892 BdrvRequestFlags flags)
2893 {
2894 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors);
2895
2896 if (!(bs->open_flags & BDRV_O_UNMAP)) {
2897 flags &= ~BDRV_REQ_MAY_UNMAP;
2898 }
2899
2900 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
2901 BDRV_REQ_ZERO_WRITE | flags);
2902 }
2903
2904 /**
2905 * Truncate file to 'offset' bytes (needed only for file protocols)
2906 */
2907 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
2908 {
2909 BlockDriver *drv = bs->drv;
2910 int ret;
2911 if (!drv)
2912 return -ENOMEDIUM;
2913 if (!drv->bdrv_truncate)
2914 return -ENOTSUP;
2915 if (bs->read_only)
2916 return -EACCES;
2917 if (bdrv_in_use(bs))
2918 return -EBUSY;
2919 ret = drv->bdrv_truncate(bs, offset);
2920 if (ret == 0) {
2921 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
2922 bdrv_dev_resize_cb(bs);
2923 }
2924 return ret;
2925 }
2926
2927 /**
2928 * Length of a allocated file in bytes. Sparse files are counted by actual
2929 * allocated space. Return < 0 if error or unknown.
2930 */
2931 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
2932 {
2933 BlockDriver *drv = bs->drv;
2934 if (!drv) {
2935 return -ENOMEDIUM;
2936 }
2937 if (drv->bdrv_get_allocated_file_size) {
2938 return drv->bdrv_get_allocated_file_size(bs);
2939 }
2940 if (bs->file) {
2941 return bdrv_get_allocated_file_size(bs->file);
2942 }
2943 return -ENOTSUP;
2944 }
2945
2946 /**
2947 * Length of a file in bytes. Return < 0 if error or unknown.
2948 */
2949 int64_t bdrv_getlength(BlockDriverState *bs)
2950 {
2951 BlockDriver *drv = bs->drv;
2952 if (!drv)
2953 return -ENOMEDIUM;
2954
2955 if (drv->has_variable_length) {
2956 int ret = refresh_total_sectors(bs, bs->total_sectors);
2957 if (ret < 0) {
2958 return ret;
2959 }
2960 }
2961 return bs->total_sectors * BDRV_SECTOR_SIZE;
2962 }
2963
2964 /* return 0 as number of sectors if no device present or error */
2965 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
2966 {
2967 int64_t length;
2968 length = bdrv_getlength(bs);
2969 if (length < 0)
2970 length = 0;
2971 else
2972 length = length >> BDRV_SECTOR_BITS;
2973 *nb_sectors_ptr = length;
2974 }
2975
2976 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
2977 BlockdevOnError on_write_error)
2978 {
2979 bs->on_read_error = on_read_error;
2980 bs->on_write_error = on_write_error;
2981 }
2982
2983 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
2984 {
2985 return is_read ? bs->on_read_error : bs->on_write_error;
2986 }
2987
2988 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
2989 {
2990 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
2991
2992 switch (on_err) {
2993 case BLOCKDEV_ON_ERROR_ENOSPC:
2994 return (error == ENOSPC) ? BDRV_ACTION_STOP : BDRV_ACTION_REPORT;
2995 case BLOCKDEV_ON_ERROR_STOP:
2996 return BDRV_ACTION_STOP;
2997 case BLOCKDEV_ON_ERROR_REPORT:
2998 return BDRV_ACTION_REPORT;
2999 case BLOCKDEV_ON_ERROR_IGNORE:
3000 return BDRV_ACTION_IGNORE;
3001 default:
3002 abort();
3003 }
3004 }
3005
3006 /* This is done by device models because, while the block layer knows
3007 * about the error, it does not know whether an operation comes from
3008 * the device or the block layer (from a job, for example).
3009 */
3010 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3011 bool is_read, int error)
3012 {
3013 assert(error >= 0);
3014 bdrv_emit_qmp_error_event(bs, QEVENT_BLOCK_IO_ERROR, action, is_read);
3015 if (action == BDRV_ACTION_STOP) {
3016 vm_stop(RUN_STATE_IO_ERROR);
3017 bdrv_iostatus_set_err(bs, error);
3018 }
3019 }
3020
3021 int bdrv_is_read_only(BlockDriverState *bs)
3022 {
3023 return bs->read_only;
3024 }
3025
3026 int bdrv_is_sg(BlockDriverState *bs)
3027 {
3028 return bs->sg;
3029 }
3030
3031 int bdrv_enable_write_cache(BlockDriverState *bs)
3032 {
3033 return bs->enable_write_cache;
3034 }
3035
3036 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3037 {
3038 bs->enable_write_cache = wce;
3039
3040 /* so a reopen() will preserve wce */
3041 if (wce) {
3042 bs->open_flags |= BDRV_O_CACHE_WB;
3043 } else {
3044 bs->open_flags &= ~BDRV_O_CACHE_WB;
3045 }
3046 }
3047
3048 int bdrv_is_encrypted(BlockDriverState *bs)
3049 {
3050 if (bs->backing_hd && bs->backing_hd->encrypted)
3051 return 1;
3052 return bs->encrypted;
3053 }
3054
3055 int bdrv_key_required(BlockDriverState *bs)
3056 {
3057 BlockDriverState *backing_hd = bs->backing_hd;
3058
3059 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3060 return 1;
3061 return (bs->encrypted && !bs->valid_key);
3062 }
3063
3064 int bdrv_set_key(BlockDriverState *bs, const char *key)
3065 {
3066 int ret;
3067 if (bs->backing_hd && bs->backing_hd->encrypted) {
3068 ret = bdrv_set_key(bs->backing_hd, key);
3069 if (ret < 0)
3070 return ret;
3071 if (!bs->encrypted)
3072 return 0;
3073 }
3074 if (!bs->encrypted) {
3075 return -EINVAL;
3076 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3077 return -ENOMEDIUM;
3078 }
3079 ret = bs->drv->bdrv_set_key(bs, key);
3080 if (ret < 0) {
3081 bs->valid_key = 0;
3082 } else if (!bs->valid_key) {
3083 bs->valid_key = 1;
3084 /* call the change callback now, we skipped it on open */
3085 bdrv_dev_change_media_cb(bs, true);
3086 }
3087 return ret;
3088 }
3089
3090 const char *bdrv_get_format_name(BlockDriverState *bs)
3091 {
3092 return bs->drv ? bs->drv->format_name : NULL;
3093 }
3094
3095 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3096 void *opaque)
3097 {
3098 BlockDriver *drv;
3099
3100 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3101 it(opaque, drv->format_name);
3102 }
3103 }
3104
3105 BlockDriverState *bdrv_find(const char *name)
3106 {
3107 BlockDriverState *bs;
3108
3109 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3110 if (!strcmp(name, bs->device_name)) {
3111 return bs;
3112 }
3113 }
3114 return NULL;
3115 }
3116
3117 BlockDriverState *bdrv_next(BlockDriverState *bs)
3118 {
3119 if (!bs) {
3120 return QTAILQ_FIRST(&bdrv_states);
3121 }
3122 return QTAILQ_NEXT(bs, list);
3123 }
3124
3125 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3126 {
3127 BlockDriverState *bs;
3128
3129 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3130 it(opaque, bs);
3131 }
3132 }
3133
3134 const char *bdrv_get_device_name(BlockDriverState *bs)
3135 {
3136 return bs->device_name;
3137 }
3138
3139 int bdrv_get_flags(BlockDriverState *bs)
3140 {
3141 return bs->open_flags;
3142 }
3143
3144 int bdrv_flush_all(void)
3145 {
3146 BlockDriverState *bs;
3147 int result = 0;
3148
3149 QTAILQ_FOREACH(bs, &bdrv_states, list) {
3150 int ret = bdrv_flush(bs);
3151 if (ret < 0 && !result) {
3152 result = ret;
3153 }
3154 }
3155
3156 return result;
3157 }
3158
3159 int bdrv_has_zero_init_1(BlockDriverState *bs)
3160 {
3161 return 1;
3162 }
3163
3164 int bdrv_has_zero_init(BlockDriverState *bs)
3165 {
3166 assert(bs->drv);
3167
3168 /* If BS is a copy on write image, it is initialized to
3169 the contents of the base image, which may not be zeroes. */
3170 if (bs->backing_hd) {
3171 return 0;
3172 }
3173 if (bs->drv->bdrv_has_zero_init) {
3174 return bs->drv->bdrv_has_zero_init(bs);
3175 }
3176
3177 /* safe default */
3178 return 0;
3179 }
3180
3181 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3182 {
3183 BlockDriverInfo bdi;
3184
3185 if (bs->backing_hd) {
3186 return false;
3187 }
3188
3189 if (bdrv_get_info(bs, &bdi) == 0) {
3190 return bdi.unallocated_blocks_are_zero;
3191 }
3192
3193 return false;
3194 }
3195
3196 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3197 {
3198 BlockDriverInfo bdi;
3199
3200 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3201 return false;
3202 }
3203
3204 if (bdrv_get_info(bs, &bdi) == 0) {
3205 return bdi.can_write_zeroes_with_unmap;
3206 }
3207
3208 return false;
3209 }
3210
3211 typedef struct BdrvCoGetBlockStatusData {
3212 BlockDriverState *bs;
3213 BlockDriverState *base;
3214 int64_t sector_num;
3215 int nb_sectors;
3216 int *pnum;
3217 int64_t ret;
3218 bool done;
3219 } BdrvCoGetBlockStatusData;
3220
3221 /*
3222 * Returns true iff the specified sector is present in the disk image. Drivers
3223 * not implementing the functionality are assumed to not support backing files,
3224 * hence all their sectors are reported as allocated.
3225 *
3226 * If 'sector_num' is beyond the end of the disk image the return value is 0
3227 * and 'pnum' is set to 0.
3228 *
3229 * 'pnum' is set to the number of sectors (including and immediately following
3230 * the specified sector) that are known to be in the same
3231 * allocated/unallocated state.
3232 *
3233 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3234 * beyond the end of the disk image it will be clamped.
3235 */
3236 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3237 int64_t sector_num,
3238 int nb_sectors, int *pnum)
3239 {
3240 int64_t length;
3241 int64_t n;
3242 int64_t ret, ret2;
3243
3244 length = bdrv_getlength(bs);
3245 if (length < 0) {
3246 return length;
3247 }
3248
3249 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3250 *pnum = 0;
3251 return 0;
3252 }
3253
3254 n = bs->total_sectors - sector_num;
3255 if (n < nb_sectors) {
3256 nb_sectors = n;
3257 }
3258
3259 if (!bs->drv->bdrv_co_get_block_status) {
3260 *pnum = nb_sectors;
3261 ret = BDRV_BLOCK_DATA;
3262 if (bs->drv->protocol_name) {
3263 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3264 }
3265 return ret;
3266 }
3267
3268 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3269 if (ret < 0) {
3270 *pnum = 0;
3271 return ret;
3272 }
3273
3274 if (ret & BDRV_BLOCK_RAW) {
3275 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3276 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3277 *pnum, pnum);
3278 }
3279
3280 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3281 if (bdrv_unallocated_blocks_are_zero(bs)) {
3282 ret |= BDRV_BLOCK_ZERO;
3283 } else if (bs->backing_hd) {
3284 BlockDriverState *bs2 = bs->backing_hd;
3285 int64_t length2 = bdrv_getlength(bs2);
3286 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3287 ret |= BDRV_BLOCK_ZERO;
3288 }
3289 }
3290 }
3291
3292 if (bs->file &&
3293 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3294 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3295 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3296 *pnum, pnum);
3297 if (ret2 >= 0) {
3298 /* Ignore errors. This is just providing extra information, it
3299 * is useful but not necessary.
3300 */
3301 ret |= (ret2 & BDRV_BLOCK_ZERO);
3302 }
3303 }
3304
3305 return ret;
3306 }
3307
3308 /* Coroutine wrapper for bdrv_get_block_status() */
3309 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3310 {
3311 BdrvCoGetBlockStatusData *data = opaque;
3312 BlockDriverState *bs = data->bs;
3313
3314 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3315 data->pnum);
3316 data->done = true;
3317 }
3318
3319 /*
3320 * Synchronous wrapper around bdrv_co_get_block_status().
3321 *
3322 * See bdrv_co_get_block_status() for details.
3323 */
3324 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
3325 int nb_sectors, int *pnum)
3326 {
3327 Coroutine *co;
3328 BdrvCoGetBlockStatusData data = {
3329 .bs = bs,
3330 .sector_num = sector_num,
3331 .nb_sectors = nb_sectors,
3332 .pnum = pnum,
3333 .done = false,
3334 };
3335
3336 if (qemu_in_coroutine()) {
3337 /* Fast-path if already in coroutine context */
3338 bdrv_get_block_status_co_entry(&data);
3339 } else {
3340 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
3341 qemu_coroutine_enter(co, &data);
3342 while (!data.done) {
3343 qemu_aio_wait();
3344 }
3345 }
3346 return data.ret;
3347 }
3348
3349 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
3350 int nb_sectors, int *pnum)
3351 {
3352 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
3353 if (ret < 0) {
3354 return ret;
3355 }
3356 return
3357 (ret & BDRV_BLOCK_DATA) ||
3358 ((ret & BDRV_BLOCK_ZERO) && !bdrv_has_zero_init(bs));
3359 }
3360
3361 /*
3362 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
3363 *
3364 * Return true if the given sector is allocated in any image between
3365 * BASE and TOP (inclusive). BASE can be NULL to check if the given
3366 * sector is allocated in any image of the chain. Return false otherwise.
3367 *
3368 * 'pnum' is set to the number of sectors (including and immediately following
3369 * the specified sector) that are known to be in the same
3370 * allocated/unallocated state.
3371 *
3372 */
3373 int bdrv_is_allocated_above(BlockDriverState *top,
3374 BlockDriverState *base,
3375 int64_t sector_num,
3376 int nb_sectors, int *pnum)
3377 {
3378 BlockDriverState *intermediate;
3379 int ret, n = nb_sectors;
3380
3381 intermediate = top;
3382 while (intermediate && intermediate != base) {
3383 int pnum_inter;
3384 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
3385 &pnum_inter);
3386 if (ret < 0) {
3387 return ret;
3388 } else if (ret) {
3389 *pnum = pnum_inter;
3390 return 1;
3391 }
3392
3393 /*
3394 * [sector_num, nb_sectors] is unallocated on top but intermediate
3395 * might have
3396 *
3397 * [sector_num+x, nr_sectors] allocated.
3398 */
3399 if (n > pnum_inter &&
3400 (intermediate == top ||
3401 sector_num + pnum_inter < intermediate->total_sectors)) {
3402 n = pnum_inter;
3403 }
3404
3405 intermediate = intermediate->backing_hd;
3406 }
3407
3408 *pnum = n;
3409 return 0;
3410 }
3411
3412 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
3413 {
3414 if (bs->backing_hd && bs->backing_hd->encrypted)
3415 return bs->backing_file;
3416 else if (bs->encrypted)
3417 return bs->filename;
3418 else
3419 return NULL;
3420 }
3421
3422 void bdrv_get_backing_filename(BlockDriverState *bs,
3423 char *filename, int filename_size)
3424 {
3425 pstrcpy(filename, filename_size, bs->backing_file);
3426 }
3427
3428 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
3429 const uint8_t *buf, int nb_sectors)
3430 {
3431 BlockDriver *drv = bs->drv;
3432 if (!drv)
3433 return -ENOMEDIUM;
3434 if (!drv->bdrv_write_compressed)
3435 return -ENOTSUP;
3436 if (bdrv_check_request(bs, sector_num, nb_sectors))
3437 return -EIO;
3438
3439 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
3440
3441 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
3442 }
3443
3444 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
3445 {
3446 BlockDriver *drv = bs->drv;
3447 if (!drv)
3448 return -ENOMEDIUM;
3449 if (!drv->bdrv_get_info)
3450 return -ENOTSUP;
3451 memset(bdi, 0, sizeof(*bdi));
3452 return drv->bdrv_get_info(bs, bdi);
3453 }
3454
3455 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
3456 {
3457 BlockDriver *drv = bs->drv;
3458 if (drv && drv->bdrv_get_specific_info) {
3459 return drv->bdrv_get_specific_info(bs);
3460 }
3461 return NULL;
3462 }
3463
3464 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
3465 int64_t pos, int size)
3466 {
3467 QEMUIOVector qiov;
3468 struct iovec iov = {
3469 .iov_base = (void *) buf,
3470 .iov_len = size,
3471 };
3472
3473 qemu_iovec_init_external(&qiov, &iov, 1);
3474 return bdrv_writev_vmstate(bs, &qiov, pos);
3475 }
3476
3477 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
3478 {
3479 BlockDriver *drv = bs->drv;
3480
3481 if (!drv) {
3482 return -ENOMEDIUM;
3483 } else if (drv->bdrv_save_vmstate) {
3484 return drv->bdrv_save_vmstate(bs, qiov, pos);
3485 } else if (bs->file) {
3486 return bdrv_writev_vmstate(bs->file, qiov, pos);
3487 }
3488
3489 return -ENOTSUP;
3490 }
3491
3492 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
3493 int64_t pos, int size)
3494 {
3495 BlockDriver *drv = bs->drv;
3496 if (!drv)
3497 return -ENOMEDIUM;
3498 if (drv->bdrv_load_vmstate)
3499 return drv->bdrv_load_vmstate(bs, buf, pos, size);
3500 if (bs->file)
3501 return bdrv_load_vmstate(bs->file, buf, pos, size);
3502 return -ENOTSUP;
3503 }
3504
3505 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
3506 {
3507 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
3508 return;
3509 }
3510
3511 bs->drv->bdrv_debug_event(bs, event);
3512 }
3513
3514 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
3515 const char *tag)
3516 {
3517 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
3518 bs = bs->file;
3519 }
3520
3521 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
3522 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
3523 }
3524
3525 return -ENOTSUP;
3526 }
3527
3528 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
3529 {
3530 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
3531 bs = bs->file;
3532 }
3533
3534 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
3535 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
3536 }
3537
3538 return -ENOTSUP;
3539 }
3540
3541 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
3542 {
3543 while (bs && bs->drv && !bs->drv->bdrv_debug_resume) {
3544 bs = bs->file;
3545 }
3546
3547 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
3548 return bs->drv->bdrv_debug_resume(bs, tag);
3549 }
3550
3551 return -ENOTSUP;
3552 }
3553
3554 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
3555 {
3556 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
3557 bs = bs->file;
3558 }
3559
3560 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
3561 return bs->drv->bdrv_debug_is_suspended(bs, tag);
3562 }
3563
3564 return false;
3565 }
3566
3567 int bdrv_is_snapshot(BlockDriverState *bs)
3568 {
3569 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
3570 }
3571
3572 /* backing_file can either be relative, or absolute, or a protocol. If it is
3573 * relative, it must be relative to the chain. So, passing in bs->filename
3574 * from a BDS as backing_file should not be done, as that may be relative to
3575 * the CWD rather than the chain. */
3576 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
3577 const char *backing_file)
3578 {
3579 char *filename_full = NULL;
3580 char *backing_file_full = NULL;
3581 char *filename_tmp = NULL;
3582 int is_protocol = 0;
3583 BlockDriverState *curr_bs = NULL;
3584 BlockDriverState *retval = NULL;
3585
3586 if (!bs || !bs->drv || !backing_file) {
3587 return NULL;
3588 }
3589
3590 filename_full = g_malloc(PATH_MAX);
3591 backing_file_full = g_malloc(PATH_MAX);
3592 filename_tmp = g_malloc(PATH_MAX);
3593
3594 is_protocol = path_has_protocol(backing_file);
3595
3596 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
3597
3598 /* If either of the filename paths is actually a protocol, then
3599 * compare unmodified paths; otherwise make paths relative */
3600 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
3601 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
3602 retval = curr_bs->backing_hd;
3603 break;
3604 }
3605 } else {
3606 /* If not an absolute filename path, make it relative to the current
3607 * image's filename path */
3608 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3609 backing_file);
3610
3611 /* We are going to compare absolute pathnames */
3612 if (!realpath(filename_tmp, filename_full)) {
3613 continue;
3614 }
3615
3616 /* We need to make sure the backing filename we are comparing against
3617 * is relative to the current image filename (or absolute) */
3618 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
3619 curr_bs->backing_file);
3620
3621 if (!realpath(filename_tmp, backing_file_full)) {
3622 continue;
3623 }
3624
3625 if (strcmp(backing_file_full, filename_full) == 0) {
3626 retval = curr_bs->backing_hd;
3627 break;
3628 }
3629 }
3630 }
3631
3632 g_free(filename_full);
3633 g_free(backing_file_full);
3634 g_free(filename_tmp);
3635 return retval;
3636 }
3637
3638 int bdrv_get_backing_file_depth(BlockDriverState *bs)
3639 {
3640 if (!bs->drv) {
3641 return 0;
3642 }
3643
3644 if (!bs->backing_hd) {
3645 return 0;
3646 }
3647
3648 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
3649 }
3650
3651 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
3652 {
3653 BlockDriverState *curr_bs = NULL;
3654
3655 if (!bs) {
3656 return NULL;
3657 }
3658
3659 curr_bs = bs;
3660
3661 while (curr_bs->backing_hd) {
3662 curr_bs = curr_bs->backing_hd;
3663 }
3664 return curr_bs;
3665 }
3666
3667 /**************************************************************/
3668 /* async I/Os */
3669
3670 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
3671 QEMUIOVector *qiov, int nb_sectors,
3672 BlockDriverCompletionFunc *cb, void *opaque)
3673 {
3674 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
3675
3676 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3677 cb, opaque, false);
3678 }
3679
3680 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
3681 QEMUIOVector *qiov, int nb_sectors,
3682 BlockDriverCompletionFunc *cb, void *opaque)
3683 {
3684 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
3685
3686 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors,
3687 cb, opaque, true);
3688 }
3689
3690
3691 typedef struct MultiwriteCB {
3692 int error;
3693 int num_requests;
3694 int num_callbacks;
3695 struct {
3696 BlockDriverCompletionFunc *cb;
3697 void *opaque;
3698 QEMUIOVector *free_qiov;
3699 } callbacks[];
3700 } MultiwriteCB;
3701
3702 static void multiwrite_user_cb(MultiwriteCB *mcb)
3703 {
3704 int i;
3705
3706 for (i = 0; i < mcb->num_callbacks; i++) {
3707 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
3708 if (mcb->callbacks[i].free_qiov) {
3709 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
3710 }
3711 g_free(mcb->callbacks[i].free_qiov);
3712 }
3713 }
3714
3715 static void multiwrite_cb(void *opaque, int ret)
3716 {
3717 MultiwriteCB *mcb = opaque;
3718
3719 trace_multiwrite_cb(mcb, ret);
3720
3721 if (ret < 0 && !mcb->error) {
3722 mcb->error = ret;
3723 }
3724
3725 mcb->num_requests--;
3726 if (mcb->num_requests == 0) {
3727 multiwrite_user_cb(mcb);
3728 g_free(mcb);
3729 }
3730 }
3731
3732 static int multiwrite_req_compare(const void *a, const void *b)
3733 {
3734 const BlockRequest *req1 = a, *req2 = b;
3735
3736 /*
3737 * Note that we can't simply subtract req2->sector from req1->sector
3738 * here as that could overflow the return value.
3739 */
3740 if (req1->sector > req2->sector) {
3741 return 1;
3742 } else if (req1->sector < req2->sector) {
3743 return -1;
3744 } else {
3745 return 0;
3746 }
3747 }
3748
3749 /*
3750 * Takes a bunch of requests and tries to merge them. Returns the number of
3751 * requests that remain after merging.
3752 */
3753 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
3754 int num_reqs, MultiwriteCB *mcb)
3755 {
3756 int i, outidx;
3757
3758 // Sort requests by start sector
3759 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
3760
3761 // Check if adjacent requests touch the same clusters. If so, combine them,
3762 // filling up gaps with zero sectors.
3763 outidx = 0;
3764 for (i = 1; i < num_reqs; i++) {
3765 int merge = 0;
3766 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
3767
3768 // Handle exactly sequential writes and overlapping writes.
3769 if (reqs[i].sector <= oldreq_last) {
3770 merge = 1;
3771 }
3772
3773 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
3774 merge = 0;
3775 }
3776
3777 if (merge) {
3778 size_t size;
3779 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
3780 qemu_iovec_init(qiov,
3781 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
3782
3783 // Add the first request to the merged one. If the requests are
3784 // overlapping, drop the last sectors of the first request.
3785 size = (reqs[i].sector - reqs[outidx].sector) << 9;
3786 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
3787
3788 // We should need to add any zeros between the two requests
3789 assert (reqs[i].sector <= oldreq_last);
3790
3791 // Add the second request
3792 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
3793
3794 reqs[outidx].nb_sectors = qiov->size >> 9;
3795 reqs[outidx].qiov = qiov;
3796
3797 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
3798 } else {
3799 outidx++;
3800 reqs[outidx].sector = reqs[i].sector;
3801 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
3802 reqs[outidx].qiov = reqs[i].qiov;
3803 }
3804 }
3805
3806 return outidx + 1;
3807 }
3808
3809 /*
3810 * Submit multiple AIO write requests at once.
3811 *
3812 * On success, the function returns 0 and all requests in the reqs array have
3813 * been submitted. In error case this function returns -1, and any of the
3814 * requests may or may not be submitted yet. In particular, this means that the
3815 * callback will be called for some of the requests, for others it won't. The
3816 * caller must check the error field of the BlockRequest to wait for the right
3817 * callbacks (if error != 0, no callback will be called).
3818 *
3819 * The implementation may modify the contents of the reqs array, e.g. to merge
3820 * requests. However, the fields opaque and error are left unmodified as they
3821 * are used to signal failure for a single request to the caller.
3822 */
3823 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
3824 {
3825 MultiwriteCB *mcb;
3826 int i;
3827
3828 /* don't submit writes if we don't have a medium */
3829 if (bs->drv == NULL) {
3830 for (i = 0; i < num_reqs; i++) {
3831 reqs[i].error = -ENOMEDIUM;
3832 }
3833 return -1;
3834 }
3835
3836 if (num_reqs == 0) {
3837 return 0;
3838 }
3839
3840 // Create MultiwriteCB structure
3841 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
3842 mcb->num_requests = 0;
3843 mcb->num_callbacks = num_reqs;
3844
3845 for (i = 0; i < num_reqs; i++) {
3846 mcb->callbacks[i].cb = reqs[i].cb;
3847 mcb->callbacks[i].opaque = reqs[i].opaque;
3848 }
3849
3850 // Check for mergable requests
3851 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
3852
3853 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
3854
3855 /* Run the aio requests. */
3856 mcb->num_requests = num_reqs;
3857 for (i = 0; i < num_reqs; i++) {
3858 bdrv_aio_writev(bs, reqs[i].sector, reqs[i].qiov,
3859 reqs[i].nb_sectors, multiwrite_cb, mcb);
3860 }
3861
3862 return 0;
3863 }
3864
3865 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
3866 {
3867 acb->aiocb_info->cancel(acb);
3868 }
3869
3870 /**************************************************************/
3871 /* async block device emulation */
3872
3873 typedef struct BlockDriverAIOCBSync {
3874 BlockDriverAIOCB common;
3875 QEMUBH *bh;
3876 int ret;
3877 /* vector translation state */
3878 QEMUIOVector *qiov;
3879 uint8_t *bounce;
3880 int is_write;
3881 } BlockDriverAIOCBSync;
3882
3883 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
3884 {
3885 BlockDriverAIOCBSync *acb =
3886 container_of(blockacb, BlockDriverAIOCBSync, common);
3887 qemu_bh_delete(acb->bh);
3888 acb->bh = NULL;
3889 qemu_aio_release(acb);
3890 }
3891
3892 static const AIOCBInfo bdrv_em_aiocb_info = {
3893 .aiocb_size = sizeof(BlockDriverAIOCBSync),
3894 .cancel = bdrv_aio_cancel_em,
3895 };
3896
3897 static void bdrv_aio_bh_cb(void *opaque)
3898 {
3899 BlockDriverAIOCBSync *acb = opaque;
3900
3901 if (!acb->is_write)
3902 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
3903 qemu_vfree(acb->bounce);
3904 acb->common.cb(acb->common.opaque, acb->ret);
3905 qemu_bh_delete(acb->bh);
3906 acb->bh = NULL;
3907 qemu_aio_release(acb);
3908 }
3909
3910 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
3911 int64_t sector_num,
3912 QEMUIOVector *qiov,
3913 int nb_sectors,
3914 BlockDriverCompletionFunc *cb,
3915 void *opaque,
3916 int is_write)
3917
3918 {
3919 BlockDriverAIOCBSync *acb;
3920
3921 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
3922 acb->is_write = is_write;
3923 acb->qiov = qiov;
3924 acb->bounce = qemu_blockalign(bs, qiov->size);
3925 acb->bh = qemu_bh_new(bdrv_aio_bh_cb, acb);
3926
3927 if (is_write) {
3928 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
3929 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
3930 } else {
3931 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
3932 }
3933
3934 qemu_bh_schedule(acb->bh);
3935
3936 return &acb->common;
3937 }
3938
3939 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
3940 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3941 BlockDriverCompletionFunc *cb, void *opaque)
3942 {
3943 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
3944 }
3945
3946 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
3947 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
3948 BlockDriverCompletionFunc *cb, void *opaque)
3949 {
3950 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
3951 }
3952
3953
3954 typedef struct BlockDriverAIOCBCoroutine {
3955 BlockDriverAIOCB common;
3956 BlockRequest req;
3957 bool is_write;
3958 bool *done;
3959 QEMUBH* bh;
3960 } BlockDriverAIOCBCoroutine;
3961
3962 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
3963 {
3964 BlockDriverAIOCBCoroutine *acb =
3965 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
3966 bool done = false;
3967
3968 acb->done = &done;
3969 while (!done) {
3970 qemu_aio_wait();
3971 }
3972 }
3973
3974 static const AIOCBInfo bdrv_em_co_aiocb_info = {
3975 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
3976 .cancel = bdrv_aio_co_cancel_em,
3977 };
3978
3979 static void bdrv_co_em_bh(void *opaque)
3980 {
3981 BlockDriverAIOCBCoroutine *acb = opaque;
3982
3983 acb->common.cb(acb->common.opaque, acb->req.error);
3984
3985 if (acb->done) {
3986 *acb->done = true;
3987 }
3988
3989 qemu_bh_delete(acb->bh);
3990 qemu_aio_release(acb);
3991 }
3992
3993 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
3994 static void coroutine_fn bdrv_co_do_rw(void *opaque)
3995 {
3996 BlockDriverAIOCBCoroutine *acb = opaque;
3997 BlockDriverState *bs = acb->common.bs;
3998
3999 if (!acb->is_write) {
4000 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4001 acb->req.nb_sectors, acb->req.qiov, 0);
4002 } else {
4003 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4004 acb->req.nb_sectors, acb->req.qiov, 0);
4005 }
4006
4007 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4008 qemu_bh_schedule(acb->bh);
4009 }
4010
4011 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4012 int64_t sector_num,
4013 QEMUIOVector *qiov,
4014 int nb_sectors,
4015 BlockDriverCompletionFunc *cb,
4016 void *opaque,
4017 bool is_write)
4018 {
4019 Coroutine *co;
4020 BlockDriverAIOCBCoroutine *acb;
4021
4022 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4023 acb->req.sector = sector_num;
4024 acb->req.nb_sectors = nb_sectors;
4025 acb->req.qiov = qiov;
4026 acb->is_write = is_write;
4027 acb->done = NULL;
4028
4029 co = qemu_coroutine_create(bdrv_co_do_rw);
4030 qemu_coroutine_enter(co, acb);
4031
4032 return &acb->common;
4033 }
4034
4035 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4036 {
4037 BlockDriverAIOCBCoroutine *acb = opaque;
4038 BlockDriverState *bs = acb->common.bs;
4039
4040 acb->req.error = bdrv_co_flush(bs);
4041 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4042 qemu_bh_schedule(acb->bh);
4043 }
4044
4045 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4046 BlockDriverCompletionFunc *cb, void *opaque)
4047 {
4048 trace_bdrv_aio_flush(bs, opaque);
4049
4050 Coroutine *co;
4051 BlockDriverAIOCBCoroutine *acb;
4052
4053 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4054 acb->done = NULL;
4055
4056 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4057 qemu_coroutine_enter(co, acb);
4058
4059 return &acb->common;
4060 }
4061
4062 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4063 {
4064 BlockDriverAIOCBCoroutine *acb = opaque;
4065 BlockDriverState *bs = acb->common.bs;
4066
4067 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4068 acb->bh = qemu_bh_new(bdrv_co_em_bh, acb);
4069 qemu_bh_schedule(acb->bh);
4070 }
4071
4072 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4073 int64_t sector_num, int nb_sectors,
4074 BlockDriverCompletionFunc *cb, void *opaque)
4075 {
4076 Coroutine *co;
4077 BlockDriverAIOCBCoroutine *acb;
4078
4079 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4080
4081 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4082 acb->req.sector = sector_num;
4083 acb->req.nb_sectors = nb_sectors;
4084 acb->done = NULL;
4085 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4086 qemu_coroutine_enter(co, acb);
4087
4088 return &acb->common;
4089 }
4090
4091 void bdrv_init(void)
4092 {
4093 module_call_init(MODULE_INIT_BLOCK);
4094 }
4095
4096 void bdrv_init_with_whitelist(void)
4097 {
4098 use_bdrv_whitelist = 1;
4099 bdrv_init();
4100 }
4101
4102 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4103 BlockDriverCompletionFunc *cb, void *opaque)
4104 {
4105 BlockDriverAIOCB *acb;
4106
4107 acb = g_slice_alloc(aiocb_info->aiocb_size);
4108 acb->aiocb_info = aiocb_info;
4109 acb->bs = bs;
4110 acb->cb = cb;
4111 acb->opaque = opaque;
4112 return acb;
4113 }
4114
4115 void qemu_aio_release(void *p)
4116 {
4117 BlockDriverAIOCB *acb = p;
4118 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4119 }
4120
4121 /**************************************************************/
4122 /* Coroutine block device emulation */
4123
4124 typedef struct CoroutineIOCompletion {
4125 Coroutine *coroutine;
4126 int ret;
4127 } CoroutineIOCompletion;
4128
4129 static void bdrv_co_io_em_complete(void *opaque, int ret)
4130 {
4131 CoroutineIOCompletion *co = opaque;
4132
4133 co->ret = ret;
4134 qemu_coroutine_enter(co->coroutine, NULL);
4135 }
4136
4137 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4138 int nb_sectors, QEMUIOVector *iov,
4139 bool is_write)
4140 {
4141 CoroutineIOCompletion co = {
4142 .coroutine = qemu_coroutine_self(),
4143 };
4144 BlockDriverAIOCB *acb;
4145
4146 if (is_write) {
4147 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4148 bdrv_co_io_em_complete, &co);
4149 } else {
4150 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4151 bdrv_co_io_em_complete, &co);
4152 }
4153
4154 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4155 if (!acb) {
4156 return -EIO;
4157 }
4158 qemu_coroutine_yield();
4159
4160 return co.ret;
4161 }
4162
4163 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4164 int64_t sector_num, int nb_sectors,
4165 QEMUIOVector *iov)
4166 {
4167 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4168 }
4169
4170 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4171 int64_t sector_num, int nb_sectors,
4172 QEMUIOVector *iov)
4173 {
4174 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4175 }
4176
4177 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4178 {
4179 RwCo *rwco = opaque;
4180
4181 rwco->ret = bdrv_co_flush(rwco->bs);
4182 }
4183
4184 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4185 {
4186 int ret;
4187
4188 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4189 return 0;
4190 }
4191
4192 /* Write back cached data to the OS even with cache=unsafe */
4193 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4194 if (bs->drv->bdrv_co_flush_to_os) {
4195 ret = bs->drv->bdrv_co_flush_to_os(bs);
4196 if (ret < 0) {
4197 return ret;
4198 }
4199 }
4200
4201 /* But don't actually force it to the disk with cache=unsafe */
4202 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4203 goto flush_parent;
4204 }
4205
4206 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4207 if (bs->drv->bdrv_co_flush_to_disk) {
4208 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4209 } else if (bs->drv->bdrv_aio_flush) {
4210 BlockDriverAIOCB *acb;
4211 CoroutineIOCompletion co = {
4212 .coroutine = qemu_coroutine_self(),
4213 };
4214
4215 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4216 if (acb == NULL) {
4217 ret = -EIO;
4218 } else {
4219 qemu_coroutine_yield();
4220 ret = co.ret;
4221 }
4222 } else {
4223 /*
4224 * Some block drivers always operate in either writethrough or unsafe
4225 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4226 * know how the server works (because the behaviour is hardcoded or
4227 * depends on server-side configuration), so we can't ensure that
4228 * everything is safe on disk. Returning an error doesn't work because
4229 * that would break guests even if the server operates in writethrough
4230 * mode.
4231 *
4232 * Let's hope the user knows what he's doing.
4233 */
4234 ret = 0;
4235 }
4236 if (ret < 0) {
4237 return ret;
4238 }
4239
4240 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4241 * in the case of cache=unsafe, so there are no useless flushes.
4242 */
4243 flush_parent:
4244 return bdrv_co_flush(bs->file);
4245 }
4246
4247 void bdrv_invalidate_cache(BlockDriverState *bs)
4248 {
4249 if (bs->drv && bs->drv->bdrv_invalidate_cache) {
4250 bs->drv->bdrv_invalidate_cache(bs);
4251 }
4252 }
4253
4254 void bdrv_invalidate_cache_all(void)
4255 {
4256 BlockDriverState *bs;
4257
4258 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4259 bdrv_invalidate_cache(bs);
4260 }
4261 }
4262
4263 void bdrv_clear_incoming_migration_all(void)
4264 {
4265 BlockDriverState *bs;
4266
4267 QTAILQ_FOREACH(bs, &bdrv_states, list) {
4268 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4269 }
4270 }
4271
4272 int bdrv_flush(BlockDriverState *bs)
4273 {
4274 Coroutine *co;
4275 RwCo rwco = {
4276 .bs = bs,
4277 .ret = NOT_DONE,
4278 };
4279
4280 if (qemu_in_coroutine()) {
4281 /* Fast-path if already in coroutine context */
4282 bdrv_flush_co_entry(&rwco);
4283 } else {
4284 co = qemu_coroutine_create(bdrv_flush_co_entry);
4285 qemu_coroutine_enter(co, &rwco);
4286 while (rwco.ret == NOT_DONE) {
4287 qemu_aio_wait();
4288 }
4289 }
4290
4291 return rwco.ret;
4292 }
4293
4294 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
4295 {
4296 RwCo *rwco = opaque;
4297
4298 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
4299 }
4300
4301 /* if no limit is specified in the BlockLimits use a default
4302 * of 32768 512-byte sectors (16 MiB) per request.
4303 */
4304 #define MAX_DISCARD_DEFAULT 32768
4305
4306 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
4307 int nb_sectors)
4308 {
4309 if (!bs->drv) {
4310 return -ENOMEDIUM;
4311 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
4312 return -EIO;
4313 } else if (bs->read_only) {
4314 return -EROFS;
4315 }
4316
4317 bdrv_reset_dirty(bs, sector_num, nb_sectors);
4318
4319 /* Do nothing if disabled. */
4320 if (!(bs->open_flags & BDRV_O_UNMAP)) {
4321 return 0;
4322 }
4323
4324 if (bs->drv->bdrv_co_discard) {
4325 int max_discard = bs->bl.max_discard ?
4326 bs->bl.max_discard : MAX_DISCARD_DEFAULT;
4327
4328 while (nb_sectors > 0) {
4329 int ret;
4330 int num = nb_sectors;
4331
4332 /* align request */
4333 if (bs->bl.discard_alignment &&
4334 num >= bs->bl.discard_alignment &&
4335 sector_num % bs->bl.discard_alignment) {
4336 if (num > bs->bl.discard_alignment) {
4337 num = bs->bl.discard_alignment;
4338 }
4339 num -= sector_num % bs->bl.discard_alignment;
4340 }
4341
4342 /* limit request size */
4343 if (num > max_discard) {
4344 num = max_discard;
4345 }
4346
4347 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
4348 if (ret) {
4349 return ret;
4350 }
4351
4352 sector_num += num;
4353 nb_sectors -= num;
4354 }
4355 return 0;
4356 } else if (bs->drv->bdrv_aio_discard) {
4357 BlockDriverAIOCB *acb;
4358 CoroutineIOCompletion co = {
4359 .coroutine = qemu_coroutine_self(),
4360 };
4361
4362 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
4363 bdrv_co_io_em_complete, &co);
4364 if (acb == NULL) {
4365 return -EIO;
4366 } else {
4367 qemu_coroutine_yield();
4368 return co.ret;
4369 }
4370 } else {
4371 return 0;
4372 }
4373 }
4374
4375 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
4376 {
4377 Coroutine *co;
4378 RwCo rwco = {
4379 .bs = bs,
4380 .sector_num = sector_num,
4381 .nb_sectors = nb_sectors,
4382 .ret = NOT_DONE,
4383 };
4384
4385 if (qemu_in_coroutine()) {
4386 /* Fast-path if already in coroutine context */
4387 bdrv_discard_co_entry(&rwco);
4388 } else {
4389 co = qemu_coroutine_create(bdrv_discard_co_entry);
4390 qemu_coroutine_enter(co, &rwco);
4391 while (rwco.ret == NOT_DONE) {
4392 qemu_aio_wait();
4393 }
4394 }
4395
4396 return rwco.ret;
4397 }
4398
4399 /**************************************************************/
4400 /* removable device support */
4401
4402 /**
4403 * Return TRUE if the media is present
4404 */
4405 int bdrv_is_inserted(BlockDriverState *bs)
4406 {
4407 BlockDriver *drv = bs->drv;
4408
4409 if (!drv)
4410 return 0;
4411 if (!drv->bdrv_is_inserted)
4412 return 1;
4413 return drv->bdrv_is_inserted(bs);
4414 }
4415
4416 /**
4417 * Return whether the media changed since the last call to this
4418 * function, or -ENOTSUP if we don't know. Most drivers don't know.
4419 */
4420 int bdrv_media_changed(BlockDriverState *bs)
4421 {
4422 BlockDriver *drv = bs->drv;
4423
4424 if (drv && drv->bdrv_media_changed) {
4425 return drv->bdrv_media_changed(bs);
4426 }
4427 return -ENOTSUP;
4428 }
4429
4430 /**
4431 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
4432 */
4433 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
4434 {
4435 BlockDriver *drv = bs->drv;
4436
4437 if (drv && drv->bdrv_eject) {
4438 drv->bdrv_eject(bs, eject_flag);
4439 }
4440
4441 if (bs->device_name[0] != '\0') {
4442 bdrv_emit_qmp_eject_event(bs, eject_flag);
4443 }
4444 }
4445
4446 /**
4447 * Lock or unlock the media (if it is locked, the user won't be able
4448 * to eject it manually).
4449 */
4450 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
4451 {
4452 BlockDriver *drv = bs->drv;
4453
4454 trace_bdrv_lock_medium(bs, locked);
4455
4456 if (drv && drv->bdrv_lock_medium) {
4457 drv->bdrv_lock_medium(bs, locked);
4458 }
4459 }
4460
4461 /* needed for generic scsi interface */
4462
4463 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
4464 {
4465 BlockDriver *drv = bs->drv;
4466
4467 if (drv && drv->bdrv_ioctl)
4468 return drv->bdrv_ioctl(bs, req, buf);
4469 return -ENOTSUP;
4470 }
4471
4472 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
4473 unsigned long int req, void *buf,
4474 BlockDriverCompletionFunc *cb, void *opaque)
4475 {
4476 BlockDriver *drv = bs->drv;
4477
4478 if (drv && drv->bdrv_aio_ioctl)
4479 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
4480 return NULL;
4481 }
4482
4483 void bdrv_set_buffer_alignment(BlockDriverState *bs, int align)
4484 {
4485 bs->buffer_alignment = align;
4486 }
4487
4488 void *qemu_blockalign(BlockDriverState *bs, size_t size)
4489 {
4490 return qemu_memalign((bs && bs->buffer_alignment) ? bs->buffer_alignment : 512, size);
4491 }
4492
4493 /*
4494 * Check if all memory in this vector is sector aligned.
4495 */
4496 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
4497 {
4498 int i;
4499
4500 for (i = 0; i < qiov->niov; i++) {
4501 if ((uintptr_t) qiov->iov[i].iov_base % bs->buffer_alignment) {
4502 return false;
4503 }
4504 }
4505
4506 return true;
4507 }
4508
4509 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity)
4510 {
4511 int64_t bitmap_size;
4512 BdrvDirtyBitmap *bitmap;
4513
4514 assert((granularity & (granularity - 1)) == 0);
4515
4516 granularity >>= BDRV_SECTOR_BITS;
4517 assert(granularity);
4518 bitmap_size = (bdrv_getlength(bs) >> BDRV_SECTOR_BITS);
4519 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
4520 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
4521 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
4522 return bitmap;
4523 }
4524
4525 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
4526 {
4527 BdrvDirtyBitmap *bm, *next;
4528 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
4529 if (bm == bitmap) {
4530 QLIST_REMOVE(bitmap, list);
4531 hbitmap_free(bitmap->bitmap);
4532 g_free(bitmap);
4533 return;
4534 }
4535 }
4536 }
4537
4538 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
4539 {
4540 BdrvDirtyBitmap *bm;
4541 BlockDirtyInfoList *list = NULL;
4542 BlockDirtyInfoList **plist = &list;
4543
4544 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
4545 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
4546 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
4547 info->count = bdrv_get_dirty_count(bs, bm);
4548 info->granularity =
4549 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
4550 entry->value = info;
4551 *plist = entry;
4552 plist = &entry->next;
4553 }
4554
4555 return list;
4556 }
4557
4558 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
4559 {
4560 if (bitmap) {
4561 return hbitmap_get(bitmap->bitmap, sector);
4562 } else {
4563 return 0;
4564 }
4565 }
4566
4567 void bdrv_dirty_iter_init(BlockDriverState *bs,
4568 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
4569 {
4570 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
4571 }
4572
4573 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
4574 int nr_sectors)
4575 {
4576 BdrvDirtyBitmap *bitmap;
4577 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
4578 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
4579 }
4580 }
4581
4582 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
4583 {
4584 BdrvDirtyBitmap *bitmap;
4585 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
4586 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
4587 }
4588 }
4589
4590 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
4591 {
4592 return hbitmap_count(bitmap->bitmap);
4593 }
4594
4595 /* Get a reference to bs */
4596 void bdrv_ref(BlockDriverState *bs)
4597 {
4598 bs->refcnt++;
4599 }
4600
4601 /* Release a previously grabbed reference to bs.
4602 * If after releasing, reference count is zero, the BlockDriverState is
4603 * deleted. */
4604 void bdrv_unref(BlockDriverState *bs)
4605 {
4606 assert(bs->refcnt > 0);
4607 if (--bs->refcnt == 0) {
4608 bdrv_delete(bs);
4609 }
4610 }
4611
4612 void bdrv_set_in_use(BlockDriverState *bs, int in_use)
4613 {
4614 assert(bs->in_use != in_use);
4615 bs->in_use = in_use;
4616 }
4617
4618 int bdrv_in_use(BlockDriverState *bs)
4619 {
4620 return bs->in_use;
4621 }
4622
4623 void bdrv_iostatus_enable(BlockDriverState *bs)
4624 {
4625 bs->iostatus_enabled = true;
4626 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4627 }
4628
4629 /* The I/O status is only enabled if the drive explicitly
4630 * enables it _and_ the VM is configured to stop on errors */
4631 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
4632 {
4633 return (bs->iostatus_enabled &&
4634 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
4635 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
4636 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
4637 }
4638
4639 void bdrv_iostatus_disable(BlockDriverState *bs)
4640 {
4641 bs->iostatus_enabled = false;
4642 }
4643
4644 void bdrv_iostatus_reset(BlockDriverState *bs)
4645 {
4646 if (bdrv_iostatus_is_enabled(bs)) {
4647 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
4648 if (bs->job) {
4649 block_job_iostatus_reset(bs->job);
4650 }
4651 }
4652 }
4653
4654 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
4655 {
4656 assert(bdrv_iostatus_is_enabled(bs));
4657 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
4658 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
4659 BLOCK_DEVICE_IO_STATUS_FAILED;
4660 }
4661 }
4662
4663 void
4664 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
4665 enum BlockAcctType type)
4666 {
4667 assert(type < BDRV_MAX_IOTYPE);
4668
4669 cookie->bytes = bytes;
4670 cookie->start_time_ns = get_clock();
4671 cookie->type = type;
4672 }
4673
4674 void
4675 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
4676 {
4677 assert(cookie->type < BDRV_MAX_IOTYPE);
4678
4679 bs->nr_bytes[cookie->type] += cookie->bytes;
4680 bs->nr_ops[cookie->type]++;
4681 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
4682 }
4683
4684 void bdrv_img_create(const char *filename, const char *fmt,
4685 const char *base_filename, const char *base_fmt,
4686 char *options, uint64_t img_size, int flags,
4687 Error **errp, bool quiet)
4688 {
4689 QEMUOptionParameter *param = NULL, *create_options = NULL;
4690 QEMUOptionParameter *backing_fmt, *backing_file, *size;
4691 BlockDriverState *bs = NULL;
4692 BlockDriver *drv, *proto_drv;
4693 BlockDriver *backing_drv = NULL;
4694 Error *local_err = NULL;
4695 int ret = 0;
4696
4697 /* Find driver and parse its options */
4698 drv = bdrv_find_format(fmt);
4699 if (!drv) {
4700 error_setg(errp, "Unknown file format '%s'", fmt);
4701 return;
4702 }
4703
4704 proto_drv = bdrv_find_protocol(filename, true);
4705 if (!proto_drv) {
4706 error_setg(errp, "Unknown protocol '%s'", filename);
4707 return;
4708 }
4709
4710 create_options = append_option_parameters(create_options,
4711 drv->create_options);
4712 create_options = append_option_parameters(create_options,
4713 proto_drv->create_options);
4714
4715 /* Create parameter list with default values */
4716 param = parse_option_parameters("", create_options, param);
4717
4718 set_option_parameter_int(param, BLOCK_OPT_SIZE, img_size);
4719
4720 /* Parse -o options */
4721 if (options) {
4722 param = parse_option_parameters(options, create_options, param);
4723 if (param == NULL) {
4724 error_setg(errp, "Invalid options for file format '%s'.", fmt);
4725 goto out;
4726 }
4727 }
4728
4729 if (base_filename) {
4730 if (set_option_parameter(param, BLOCK_OPT_BACKING_FILE,
4731 base_filename)) {
4732 error_setg(errp, "Backing file not supported for file format '%s'",
4733 fmt);
4734 goto out;
4735 }
4736 }
4737
4738 if (base_fmt) {
4739 if (set_option_parameter(param, BLOCK_OPT_BACKING_FMT, base_fmt)) {
4740 error_setg(errp, "Backing file format not supported for file "
4741 "format '%s'", fmt);
4742 goto out;
4743 }
4744 }
4745
4746 backing_file = get_option_parameter(param, BLOCK_OPT_BACKING_FILE);
4747 if (backing_file && backing_file->value.s) {
4748 if (!strcmp(filename, backing_file->value.s)) {
4749 error_setg(errp, "Error: Trying to create an image with the "
4750 "same filename as the backing file");
4751 goto out;
4752 }
4753 }
4754
4755 backing_fmt = get_option_parameter(param, BLOCK_OPT_BACKING_FMT);
4756 if (backing_fmt && backing_fmt->value.s) {
4757 backing_drv = bdrv_find_format(backing_fmt->value.s);
4758 if (!backing_drv) {
4759 error_setg(errp, "Unknown backing file format '%s'",
4760 backing_fmt->value.s);
4761 goto out;
4762 }
4763 }
4764
4765 // The size for the image must always be specified, with one exception:
4766 // If we are using a backing file, we can obtain the size from there
4767 size = get_option_parameter(param, BLOCK_OPT_SIZE);
4768 if (size && size->value.n == -1) {
4769 if (backing_file && backing_file->value.s) {
4770 uint64_t size;
4771 char buf[32];
4772 int back_flags;
4773
4774 /* backing files always opened read-only */
4775 back_flags =
4776 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
4777
4778 bs = bdrv_new("");
4779
4780 ret = bdrv_open(bs, backing_file->value.s, NULL, back_flags,
4781 backing_drv, &local_err);
4782 if (ret < 0) {
4783 error_setg_errno(errp, -ret, "Could not open '%s': %s",
4784 backing_file->value.s,
4785 error_get_pretty(local_err));
4786 error_free(local_err);
4787 local_err = NULL;
4788 goto out;
4789 }
4790 bdrv_get_geometry(bs, &size);
4791 size *= 512;
4792
4793 snprintf(buf, sizeof(buf), "%" PRId64, size);
4794 set_option_parameter(param, BLOCK_OPT_SIZE, buf);
4795 } else {
4796 error_setg(errp, "Image creation needs a size parameter");
4797 goto out;
4798 }
4799 }
4800
4801 if (!quiet) {
4802 printf("Formatting '%s', fmt=%s ", filename, fmt);
4803 print_option_parameters(param);
4804 puts("");
4805 }
4806 ret = bdrv_create(drv, filename, param, &local_err);
4807 if (ret == -EFBIG) {
4808 /* This is generally a better message than whatever the driver would
4809 * deliver (especially because of the cluster_size_hint), since that
4810 * is most probably not much different from "image too large". */
4811 const char *cluster_size_hint = "";
4812 if (get_option_parameter(create_options, BLOCK_OPT_CLUSTER_SIZE)) {
4813 cluster_size_hint = " (try using a larger cluster size)";
4814 }
4815 error_setg(errp, "The image size is too large for file format '%s'"
4816 "%s", fmt, cluster_size_hint);
4817 error_free(local_err);
4818 local_err = NULL;
4819 }
4820
4821 out:
4822 free_option_parameters(create_options);
4823 free_option_parameters(param);
4824
4825 if (bs) {
4826 bdrv_unref(bs);
4827 }
4828 if (error_is_set(&local_err)) {
4829 error_propagate(errp, local_err);
4830 }
4831 }
4832
4833 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
4834 {
4835 /* Currently BlockDriverState always uses the main loop AioContext */
4836 return qemu_get_aio_context();
4837 }
4838
4839 void bdrv_add_before_write_notifier(BlockDriverState *bs,
4840 NotifierWithReturn *notifier)
4841 {
4842 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
4843 }
4844
4845 int bdrv_amend_options(BlockDriverState *bs, QEMUOptionParameter *options)
4846 {
4847 if (bs->drv->bdrv_amend_options == NULL) {
4848 return -ENOTSUP;
4849 }
4850 return bs->drv->bdrv_amend_options(bs, options);
4851 }
4852
4853 ExtSnapshotPerm bdrv_check_ext_snapshot(BlockDriverState *bs)
4854 {
4855 if (bs->drv->bdrv_check_ext_snapshot) {
4856 return bs->drv->bdrv_check_ext_snapshot(bs);
4857 }
4858
4859 if (bs->file && bs->file->drv && bs->file->drv->bdrv_check_ext_snapshot) {
4860 return bs->file->drv->bdrv_check_ext_snapshot(bs);
4861 }
4862
4863 /* external snapshots are allowed by default */
4864 return EXT_SNAPSHOT_ALLOWED;
4865 }
4866
4867 ExtSnapshotPerm bdrv_check_ext_snapshot_forbidden(BlockDriverState *bs)
4868 {
4869 return EXT_SNAPSHOT_FORBIDDEN;
4870 }