]> git.proxmox.com Git - mirror_qemu.git/blob - block.c
block.c: Don't return success for bdrv_append_temp_snapshot() failure
[mirror_qemu.git] / block.c
1 /*
2 * QEMU System Emulator block driver
3 *
4 * Copyright (c) 2003 Fabrice Bellard
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a copy
7 * of this software and associated documentation files (the "Software"), to deal
8 * in the Software without restriction, including without limitation the rights
9 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
10 * copies of the Software, and to permit persons to whom the Software is
11 * furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice shall be included in
14 * all copies or substantial portions of the Software.
15 *
16 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
17 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
18 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
19 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
20 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
21 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
22 * THE SOFTWARE.
23 */
24 #include "config-host.h"
25 #include "qemu-common.h"
26 #include "trace.h"
27 #include "block/block_int.h"
28 #include "block/blockjob.h"
29 #include "qemu/module.h"
30 #include "qapi/qmp/qjson.h"
31 #include "sysemu/sysemu.h"
32 #include "qemu/notify.h"
33 #include "block/coroutine.h"
34 #include "block/qapi.h"
35 #include "qmp-commands.h"
36 #include "qemu/timer.h"
37 #include "qapi-event.h"
38
39 #ifdef CONFIG_BSD
40 #include <sys/types.h>
41 #include <sys/stat.h>
42 #include <sys/ioctl.h>
43 #include <sys/queue.h>
44 #ifndef __DragonFly__
45 #include <sys/disk.h>
46 #endif
47 #endif
48
49 #ifdef _WIN32
50 #include <windows.h>
51 #endif
52
53 struct BdrvDirtyBitmap {
54 HBitmap *bitmap;
55 QLIST_ENTRY(BdrvDirtyBitmap) list;
56 };
57
58 #define NOT_DONE 0x7fffffff /* used while emulated sync operation in progress */
59
60 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load);
61 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
62 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
63 BlockDriverCompletionFunc *cb, void *opaque);
64 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
65 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
66 BlockDriverCompletionFunc *cb, void *opaque);
67 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
68 int64_t sector_num, int nb_sectors,
69 QEMUIOVector *iov);
70 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
71 int64_t sector_num, int nb_sectors,
72 QEMUIOVector *iov);
73 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
74 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
75 BdrvRequestFlags flags);
76 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
77 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
78 BdrvRequestFlags flags);
79 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
80 int64_t sector_num,
81 QEMUIOVector *qiov,
82 int nb_sectors,
83 BdrvRequestFlags flags,
84 BlockDriverCompletionFunc *cb,
85 void *opaque,
86 bool is_write);
87 static void coroutine_fn bdrv_co_do_rw(void *opaque);
88 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
89 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags);
90
91 static QTAILQ_HEAD(, BlockDriverState) bdrv_states =
92 QTAILQ_HEAD_INITIALIZER(bdrv_states);
93
94 static QTAILQ_HEAD(, BlockDriverState) graph_bdrv_states =
95 QTAILQ_HEAD_INITIALIZER(graph_bdrv_states);
96
97 static QLIST_HEAD(, BlockDriver) bdrv_drivers =
98 QLIST_HEAD_INITIALIZER(bdrv_drivers);
99
100 /* If non-zero, use only whitelisted block drivers */
101 static int use_bdrv_whitelist;
102
103 #ifdef _WIN32
104 static int is_windows_drive_prefix(const char *filename)
105 {
106 return (((filename[0] >= 'a' && filename[0] <= 'z') ||
107 (filename[0] >= 'A' && filename[0] <= 'Z')) &&
108 filename[1] == ':');
109 }
110
111 int is_windows_drive(const char *filename)
112 {
113 if (is_windows_drive_prefix(filename) &&
114 filename[2] == '\0')
115 return 1;
116 if (strstart(filename, "\\\\.\\", NULL) ||
117 strstart(filename, "//./", NULL))
118 return 1;
119 return 0;
120 }
121 #endif
122
123 /* throttling disk I/O limits */
124 void bdrv_set_io_limits(BlockDriverState *bs,
125 ThrottleConfig *cfg)
126 {
127 int i;
128
129 throttle_config(&bs->throttle_state, cfg);
130
131 for (i = 0; i < 2; i++) {
132 qemu_co_enter_next(&bs->throttled_reqs[i]);
133 }
134 }
135
136 /* this function drain all the throttled IOs */
137 static bool bdrv_start_throttled_reqs(BlockDriverState *bs)
138 {
139 bool drained = false;
140 bool enabled = bs->io_limits_enabled;
141 int i;
142
143 bs->io_limits_enabled = false;
144
145 for (i = 0; i < 2; i++) {
146 while (qemu_co_enter_next(&bs->throttled_reqs[i])) {
147 drained = true;
148 }
149 }
150
151 bs->io_limits_enabled = enabled;
152
153 return drained;
154 }
155
156 void bdrv_io_limits_disable(BlockDriverState *bs)
157 {
158 bs->io_limits_enabled = false;
159
160 bdrv_start_throttled_reqs(bs);
161
162 throttle_destroy(&bs->throttle_state);
163 }
164
165 static void bdrv_throttle_read_timer_cb(void *opaque)
166 {
167 BlockDriverState *bs = opaque;
168 qemu_co_enter_next(&bs->throttled_reqs[0]);
169 }
170
171 static void bdrv_throttle_write_timer_cb(void *opaque)
172 {
173 BlockDriverState *bs = opaque;
174 qemu_co_enter_next(&bs->throttled_reqs[1]);
175 }
176
177 /* should be called before bdrv_set_io_limits if a limit is set */
178 void bdrv_io_limits_enable(BlockDriverState *bs)
179 {
180 assert(!bs->io_limits_enabled);
181 throttle_init(&bs->throttle_state,
182 bdrv_get_aio_context(bs),
183 QEMU_CLOCK_VIRTUAL,
184 bdrv_throttle_read_timer_cb,
185 bdrv_throttle_write_timer_cb,
186 bs);
187 bs->io_limits_enabled = true;
188 }
189
190 /* This function makes an IO wait if needed
191 *
192 * @nb_sectors: the number of sectors of the IO
193 * @is_write: is the IO a write
194 */
195 static void bdrv_io_limits_intercept(BlockDriverState *bs,
196 unsigned int bytes,
197 bool is_write)
198 {
199 /* does this io must wait */
200 bool must_wait = throttle_schedule_timer(&bs->throttle_state, is_write);
201
202 /* if must wait or any request of this type throttled queue the IO */
203 if (must_wait ||
204 !qemu_co_queue_empty(&bs->throttled_reqs[is_write])) {
205 qemu_co_queue_wait(&bs->throttled_reqs[is_write]);
206 }
207
208 /* the IO will be executed, do the accounting */
209 throttle_account(&bs->throttle_state, is_write, bytes);
210
211
212 /* if the next request must wait -> do nothing */
213 if (throttle_schedule_timer(&bs->throttle_state, is_write)) {
214 return;
215 }
216
217 /* else queue next request for execution */
218 qemu_co_queue_next(&bs->throttled_reqs[is_write]);
219 }
220
221 size_t bdrv_opt_mem_align(BlockDriverState *bs)
222 {
223 if (!bs || !bs->drv) {
224 /* 4k should be on the safe side */
225 return 4096;
226 }
227
228 return bs->bl.opt_mem_alignment;
229 }
230
231 /* check if the path starts with "<protocol>:" */
232 static int path_has_protocol(const char *path)
233 {
234 const char *p;
235
236 #ifdef _WIN32
237 if (is_windows_drive(path) ||
238 is_windows_drive_prefix(path)) {
239 return 0;
240 }
241 p = path + strcspn(path, ":/\\");
242 #else
243 p = path + strcspn(path, ":/");
244 #endif
245
246 return *p == ':';
247 }
248
249 int path_is_absolute(const char *path)
250 {
251 #ifdef _WIN32
252 /* specific case for names like: "\\.\d:" */
253 if (is_windows_drive(path) || is_windows_drive_prefix(path)) {
254 return 1;
255 }
256 return (*path == '/' || *path == '\\');
257 #else
258 return (*path == '/');
259 #endif
260 }
261
262 /* if filename is absolute, just copy it to dest. Otherwise, build a
263 path to it by considering it is relative to base_path. URL are
264 supported. */
265 void path_combine(char *dest, int dest_size,
266 const char *base_path,
267 const char *filename)
268 {
269 const char *p, *p1;
270 int len;
271
272 if (dest_size <= 0)
273 return;
274 if (path_is_absolute(filename)) {
275 pstrcpy(dest, dest_size, filename);
276 } else {
277 p = strchr(base_path, ':');
278 if (p)
279 p++;
280 else
281 p = base_path;
282 p1 = strrchr(base_path, '/');
283 #ifdef _WIN32
284 {
285 const char *p2;
286 p2 = strrchr(base_path, '\\');
287 if (!p1 || p2 > p1)
288 p1 = p2;
289 }
290 #endif
291 if (p1)
292 p1++;
293 else
294 p1 = base_path;
295 if (p1 > p)
296 p = p1;
297 len = p - base_path;
298 if (len > dest_size - 1)
299 len = dest_size - 1;
300 memcpy(dest, base_path, len);
301 dest[len] = '\0';
302 pstrcat(dest, dest_size, filename);
303 }
304 }
305
306 void bdrv_get_full_backing_filename(BlockDriverState *bs, char *dest, size_t sz)
307 {
308 if (bs->backing_file[0] == '\0' || path_has_protocol(bs->backing_file)) {
309 pstrcpy(dest, sz, bs->backing_file);
310 } else {
311 path_combine(dest, sz, bs->filename, bs->backing_file);
312 }
313 }
314
315 void bdrv_register(BlockDriver *bdrv)
316 {
317 /* Block drivers without coroutine functions need emulation */
318 if (!bdrv->bdrv_co_readv) {
319 bdrv->bdrv_co_readv = bdrv_co_readv_em;
320 bdrv->bdrv_co_writev = bdrv_co_writev_em;
321
322 /* bdrv_co_readv_em()/brdv_co_writev_em() work in terms of aio, so if
323 * the block driver lacks aio we need to emulate that too.
324 */
325 if (!bdrv->bdrv_aio_readv) {
326 /* add AIO emulation layer */
327 bdrv->bdrv_aio_readv = bdrv_aio_readv_em;
328 bdrv->bdrv_aio_writev = bdrv_aio_writev_em;
329 }
330 }
331
332 QLIST_INSERT_HEAD(&bdrv_drivers, bdrv, list);
333 }
334
335 /* create a new block device (by default it is empty) */
336 BlockDriverState *bdrv_new(const char *device_name, Error **errp)
337 {
338 BlockDriverState *bs;
339 int i;
340
341 if (bdrv_find(device_name)) {
342 error_setg(errp, "Device with id '%s' already exists",
343 device_name);
344 return NULL;
345 }
346 if (bdrv_find_node(device_name)) {
347 error_setg(errp, "Device with node-name '%s' already exists",
348 device_name);
349 return NULL;
350 }
351
352 bs = g_malloc0(sizeof(BlockDriverState));
353 QLIST_INIT(&bs->dirty_bitmaps);
354 pstrcpy(bs->device_name, sizeof(bs->device_name), device_name);
355 if (device_name[0] != '\0') {
356 QTAILQ_INSERT_TAIL(&bdrv_states, bs, device_list);
357 }
358 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
359 QLIST_INIT(&bs->op_blockers[i]);
360 }
361 bdrv_iostatus_disable(bs);
362 notifier_list_init(&bs->close_notifiers);
363 notifier_with_return_list_init(&bs->before_write_notifiers);
364 qemu_co_queue_init(&bs->throttled_reqs[0]);
365 qemu_co_queue_init(&bs->throttled_reqs[1]);
366 bs->refcnt = 1;
367 bs->aio_context = qemu_get_aio_context();
368
369 return bs;
370 }
371
372 void bdrv_add_close_notifier(BlockDriverState *bs, Notifier *notify)
373 {
374 notifier_list_add(&bs->close_notifiers, notify);
375 }
376
377 BlockDriver *bdrv_find_format(const char *format_name)
378 {
379 BlockDriver *drv1;
380 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
381 if (!strcmp(drv1->format_name, format_name)) {
382 return drv1;
383 }
384 }
385 return NULL;
386 }
387
388 static int bdrv_is_whitelisted(BlockDriver *drv, bool read_only)
389 {
390 static const char *whitelist_rw[] = {
391 CONFIG_BDRV_RW_WHITELIST
392 };
393 static const char *whitelist_ro[] = {
394 CONFIG_BDRV_RO_WHITELIST
395 };
396 const char **p;
397
398 if (!whitelist_rw[0] && !whitelist_ro[0]) {
399 return 1; /* no whitelist, anything goes */
400 }
401
402 for (p = whitelist_rw; *p; p++) {
403 if (!strcmp(drv->format_name, *p)) {
404 return 1;
405 }
406 }
407 if (read_only) {
408 for (p = whitelist_ro; *p; p++) {
409 if (!strcmp(drv->format_name, *p)) {
410 return 1;
411 }
412 }
413 }
414 return 0;
415 }
416
417 BlockDriver *bdrv_find_whitelisted_format(const char *format_name,
418 bool read_only)
419 {
420 BlockDriver *drv = bdrv_find_format(format_name);
421 return drv && bdrv_is_whitelisted(drv, read_only) ? drv : NULL;
422 }
423
424 typedef struct CreateCo {
425 BlockDriver *drv;
426 char *filename;
427 QemuOpts *opts;
428 int ret;
429 Error *err;
430 } CreateCo;
431
432 static void coroutine_fn bdrv_create_co_entry(void *opaque)
433 {
434 Error *local_err = NULL;
435 int ret;
436
437 CreateCo *cco = opaque;
438 assert(cco->drv);
439
440 ret = cco->drv->bdrv_create(cco->filename, cco->opts, &local_err);
441 if (local_err) {
442 error_propagate(&cco->err, local_err);
443 }
444 cco->ret = ret;
445 }
446
447 int bdrv_create(BlockDriver *drv, const char* filename,
448 QemuOpts *opts, Error **errp)
449 {
450 int ret;
451
452 Coroutine *co;
453 CreateCo cco = {
454 .drv = drv,
455 .filename = g_strdup(filename),
456 .opts = opts,
457 .ret = NOT_DONE,
458 .err = NULL,
459 };
460
461 if (!drv->bdrv_create) {
462 error_setg(errp, "Driver '%s' does not support image creation", drv->format_name);
463 ret = -ENOTSUP;
464 goto out;
465 }
466
467 if (qemu_in_coroutine()) {
468 /* Fast-path if already in coroutine context */
469 bdrv_create_co_entry(&cco);
470 } else {
471 co = qemu_coroutine_create(bdrv_create_co_entry);
472 qemu_coroutine_enter(co, &cco);
473 while (cco.ret == NOT_DONE) {
474 qemu_aio_wait();
475 }
476 }
477
478 ret = cco.ret;
479 if (ret < 0) {
480 if (cco.err) {
481 error_propagate(errp, cco.err);
482 } else {
483 error_setg_errno(errp, -ret, "Could not create image");
484 }
485 }
486
487 out:
488 g_free(cco.filename);
489 return ret;
490 }
491
492 int bdrv_create_file(const char *filename, QemuOpts *opts, Error **errp)
493 {
494 BlockDriver *drv;
495 Error *local_err = NULL;
496 int ret;
497
498 drv = bdrv_find_protocol(filename, true);
499 if (drv == NULL) {
500 error_setg(errp, "Could not find protocol for file '%s'", filename);
501 return -ENOENT;
502 }
503
504 ret = bdrv_create(drv, filename, opts, &local_err);
505 if (local_err) {
506 error_propagate(errp, local_err);
507 }
508 return ret;
509 }
510
511 int bdrv_refresh_limits(BlockDriverState *bs)
512 {
513 BlockDriver *drv = bs->drv;
514
515 memset(&bs->bl, 0, sizeof(bs->bl));
516
517 if (!drv) {
518 return 0;
519 }
520
521 /* Take some limits from the children as a default */
522 if (bs->file) {
523 bdrv_refresh_limits(bs->file);
524 bs->bl.opt_transfer_length = bs->file->bl.opt_transfer_length;
525 bs->bl.opt_mem_alignment = bs->file->bl.opt_mem_alignment;
526 } else {
527 bs->bl.opt_mem_alignment = 512;
528 }
529
530 if (bs->backing_hd) {
531 bdrv_refresh_limits(bs->backing_hd);
532 bs->bl.opt_transfer_length =
533 MAX(bs->bl.opt_transfer_length,
534 bs->backing_hd->bl.opt_transfer_length);
535 bs->bl.opt_mem_alignment =
536 MAX(bs->bl.opt_mem_alignment,
537 bs->backing_hd->bl.opt_mem_alignment);
538 }
539
540 /* Then let the driver override it */
541 if (drv->bdrv_refresh_limits) {
542 return drv->bdrv_refresh_limits(bs);
543 }
544
545 return 0;
546 }
547
548 /*
549 * Create a uniquely-named empty temporary file.
550 * Return 0 upon success, otherwise a negative errno value.
551 */
552 int get_tmp_filename(char *filename, int size)
553 {
554 #ifdef _WIN32
555 char temp_dir[MAX_PATH];
556 /* GetTempFileName requires that its output buffer (4th param)
557 have length MAX_PATH or greater. */
558 assert(size >= MAX_PATH);
559 return (GetTempPath(MAX_PATH, temp_dir)
560 && GetTempFileName(temp_dir, "qem", 0, filename)
561 ? 0 : -GetLastError());
562 #else
563 int fd;
564 const char *tmpdir;
565 tmpdir = getenv("TMPDIR");
566 if (!tmpdir) {
567 tmpdir = "/var/tmp";
568 }
569 if (snprintf(filename, size, "%s/vl.XXXXXX", tmpdir) >= size) {
570 return -EOVERFLOW;
571 }
572 fd = mkstemp(filename);
573 if (fd < 0) {
574 return -errno;
575 }
576 if (close(fd) != 0) {
577 unlink(filename);
578 return -errno;
579 }
580 return 0;
581 #endif
582 }
583
584 /*
585 * Detect host devices. By convention, /dev/cdrom[N] is always
586 * recognized as a host CDROM.
587 */
588 static BlockDriver *find_hdev_driver(const char *filename)
589 {
590 int score_max = 0, score;
591 BlockDriver *drv = NULL, *d;
592
593 QLIST_FOREACH(d, &bdrv_drivers, list) {
594 if (d->bdrv_probe_device) {
595 score = d->bdrv_probe_device(filename);
596 if (score > score_max) {
597 score_max = score;
598 drv = d;
599 }
600 }
601 }
602
603 return drv;
604 }
605
606 BlockDriver *bdrv_find_protocol(const char *filename,
607 bool allow_protocol_prefix)
608 {
609 BlockDriver *drv1;
610 char protocol[128];
611 int len;
612 const char *p;
613
614 /* TODO Drivers without bdrv_file_open must be specified explicitly */
615
616 /*
617 * XXX(hch): we really should not let host device detection
618 * override an explicit protocol specification, but moving this
619 * later breaks access to device names with colons in them.
620 * Thanks to the brain-dead persistent naming schemes on udev-
621 * based Linux systems those actually are quite common.
622 */
623 drv1 = find_hdev_driver(filename);
624 if (drv1) {
625 return drv1;
626 }
627
628 if (!path_has_protocol(filename) || !allow_protocol_prefix) {
629 return bdrv_find_format("file");
630 }
631
632 p = strchr(filename, ':');
633 assert(p != NULL);
634 len = p - filename;
635 if (len > sizeof(protocol) - 1)
636 len = sizeof(protocol) - 1;
637 memcpy(protocol, filename, len);
638 protocol[len] = '\0';
639 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
640 if (drv1->protocol_name &&
641 !strcmp(drv1->protocol_name, protocol)) {
642 return drv1;
643 }
644 }
645 return NULL;
646 }
647
648 static int find_image_format(BlockDriverState *bs, const char *filename,
649 BlockDriver **pdrv, Error **errp)
650 {
651 int score, score_max;
652 BlockDriver *drv1, *drv;
653 uint8_t buf[2048];
654 int ret = 0;
655
656 /* Return the raw BlockDriver * to scsi-generic devices or empty drives */
657 if (bs->sg || !bdrv_is_inserted(bs) || bdrv_getlength(bs) == 0) {
658 drv = bdrv_find_format("raw");
659 if (!drv) {
660 error_setg(errp, "Could not find raw image format");
661 ret = -ENOENT;
662 }
663 *pdrv = drv;
664 return ret;
665 }
666
667 ret = bdrv_pread(bs, 0, buf, sizeof(buf));
668 if (ret < 0) {
669 error_setg_errno(errp, -ret, "Could not read image for determining its "
670 "format");
671 *pdrv = NULL;
672 return ret;
673 }
674
675 score_max = 0;
676 drv = NULL;
677 QLIST_FOREACH(drv1, &bdrv_drivers, list) {
678 if (drv1->bdrv_probe) {
679 score = drv1->bdrv_probe(buf, ret, filename);
680 if (score > score_max) {
681 score_max = score;
682 drv = drv1;
683 }
684 }
685 }
686 if (!drv) {
687 error_setg(errp, "Could not determine image format: No compatible "
688 "driver found");
689 ret = -ENOENT;
690 }
691 *pdrv = drv;
692 return ret;
693 }
694
695 /**
696 * Set the current 'total_sectors' value
697 */
698 static int refresh_total_sectors(BlockDriverState *bs, int64_t hint)
699 {
700 BlockDriver *drv = bs->drv;
701
702 /* Do not attempt drv->bdrv_getlength() on scsi-generic devices */
703 if (bs->sg)
704 return 0;
705
706 /* query actual device if possible, otherwise just trust the hint */
707 if (drv->bdrv_getlength) {
708 int64_t length = drv->bdrv_getlength(bs);
709 if (length < 0) {
710 return length;
711 }
712 hint = DIV_ROUND_UP(length, BDRV_SECTOR_SIZE);
713 }
714
715 bs->total_sectors = hint;
716 return 0;
717 }
718
719 /**
720 * Set open flags for a given discard mode
721 *
722 * Return 0 on success, -1 if the discard mode was invalid.
723 */
724 int bdrv_parse_discard_flags(const char *mode, int *flags)
725 {
726 *flags &= ~BDRV_O_UNMAP;
727
728 if (!strcmp(mode, "off") || !strcmp(mode, "ignore")) {
729 /* do nothing */
730 } else if (!strcmp(mode, "on") || !strcmp(mode, "unmap")) {
731 *flags |= BDRV_O_UNMAP;
732 } else {
733 return -1;
734 }
735
736 return 0;
737 }
738
739 /**
740 * Set open flags for a given cache mode
741 *
742 * Return 0 on success, -1 if the cache mode was invalid.
743 */
744 int bdrv_parse_cache_flags(const char *mode, int *flags)
745 {
746 *flags &= ~BDRV_O_CACHE_MASK;
747
748 if (!strcmp(mode, "off") || !strcmp(mode, "none")) {
749 *flags |= BDRV_O_NOCACHE | BDRV_O_CACHE_WB;
750 } else if (!strcmp(mode, "directsync")) {
751 *flags |= BDRV_O_NOCACHE;
752 } else if (!strcmp(mode, "writeback")) {
753 *flags |= BDRV_O_CACHE_WB;
754 } else if (!strcmp(mode, "unsafe")) {
755 *flags |= BDRV_O_CACHE_WB;
756 *flags |= BDRV_O_NO_FLUSH;
757 } else if (!strcmp(mode, "writethrough")) {
758 /* this is the default */
759 } else {
760 return -1;
761 }
762
763 return 0;
764 }
765
766 /**
767 * The copy-on-read flag is actually a reference count so multiple users may
768 * use the feature without worrying about clobbering its previous state.
769 * Copy-on-read stays enabled until all users have called to disable it.
770 */
771 void bdrv_enable_copy_on_read(BlockDriverState *bs)
772 {
773 bs->copy_on_read++;
774 }
775
776 void bdrv_disable_copy_on_read(BlockDriverState *bs)
777 {
778 assert(bs->copy_on_read > 0);
779 bs->copy_on_read--;
780 }
781
782 /*
783 * Returns the flags that a temporary snapshot should get, based on the
784 * originally requested flags (the originally requested image will have flags
785 * like a backing file)
786 */
787 static int bdrv_temp_snapshot_flags(int flags)
788 {
789 return (flags & ~BDRV_O_SNAPSHOT) | BDRV_O_TEMPORARY;
790 }
791
792 /*
793 * Returns the flags that bs->file should get, based on the given flags for
794 * the parent BDS
795 */
796 static int bdrv_inherited_flags(int flags)
797 {
798 /* Enable protocol handling, disable format probing for bs->file */
799 flags |= BDRV_O_PROTOCOL;
800
801 /* Our block drivers take care to send flushes and respect unmap policy,
802 * so we can enable both unconditionally on lower layers. */
803 flags |= BDRV_O_CACHE_WB | BDRV_O_UNMAP;
804
805 /* Clear flags that only apply to the top layer */
806 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_COPY_ON_READ);
807
808 return flags;
809 }
810
811 /*
812 * Returns the flags that bs->backing_hd should get, based on the given flags
813 * for the parent BDS
814 */
815 static int bdrv_backing_flags(int flags)
816 {
817 /* backing files always opened read-only */
818 flags &= ~(BDRV_O_RDWR | BDRV_O_COPY_ON_READ);
819
820 /* snapshot=on is handled on the top layer */
821 flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_TEMPORARY);
822
823 return flags;
824 }
825
826 static int bdrv_open_flags(BlockDriverState *bs, int flags)
827 {
828 int open_flags = flags | BDRV_O_CACHE_WB;
829
830 /*
831 * Clear flags that are internal to the block layer before opening the
832 * image.
833 */
834 open_flags &= ~(BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING | BDRV_O_PROTOCOL);
835
836 /*
837 * Snapshots should be writable.
838 */
839 if (flags & BDRV_O_TEMPORARY) {
840 open_flags |= BDRV_O_RDWR;
841 }
842
843 return open_flags;
844 }
845
846 static void bdrv_assign_node_name(BlockDriverState *bs,
847 const char *node_name,
848 Error **errp)
849 {
850 if (!node_name) {
851 return;
852 }
853
854 /* empty string node name is invalid */
855 if (node_name[0] == '\0') {
856 error_setg(errp, "Empty node name");
857 return;
858 }
859
860 /* takes care of avoiding namespaces collisions */
861 if (bdrv_find(node_name)) {
862 error_setg(errp, "node-name=%s is conflicting with a device id",
863 node_name);
864 return;
865 }
866
867 /* takes care of avoiding duplicates node names */
868 if (bdrv_find_node(node_name)) {
869 error_setg(errp, "Duplicate node name");
870 return;
871 }
872
873 /* copy node name into the bs and insert it into the graph list */
874 pstrcpy(bs->node_name, sizeof(bs->node_name), node_name);
875 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs, node_list);
876 }
877
878 /*
879 * Common part for opening disk images and files
880 *
881 * Removes all processed options from *options.
882 */
883 static int bdrv_open_common(BlockDriverState *bs, BlockDriverState *file,
884 QDict *options, int flags, BlockDriver *drv, Error **errp)
885 {
886 int ret, open_flags;
887 const char *filename;
888 const char *node_name = NULL;
889 Error *local_err = NULL;
890
891 assert(drv != NULL);
892 assert(bs->file == NULL);
893 assert(options != NULL && bs->options != options);
894
895 if (file != NULL) {
896 filename = file->filename;
897 } else {
898 filename = qdict_get_try_str(options, "filename");
899 }
900
901 if (drv->bdrv_needs_filename && !filename) {
902 error_setg(errp, "The '%s' block driver requires a file name",
903 drv->format_name);
904 return -EINVAL;
905 }
906
907 trace_bdrv_open_common(bs, filename ?: "", flags, drv->format_name);
908
909 node_name = qdict_get_try_str(options, "node-name");
910 bdrv_assign_node_name(bs, node_name, &local_err);
911 if (local_err) {
912 error_propagate(errp, local_err);
913 return -EINVAL;
914 }
915 qdict_del(options, "node-name");
916
917 /* bdrv_open() with directly using a protocol as drv. This layer is already
918 * opened, so assign it to bs (while file becomes a closed BlockDriverState)
919 * and return immediately. */
920 if (file != NULL && drv->bdrv_file_open) {
921 bdrv_swap(file, bs);
922 return 0;
923 }
924
925 bs->open_flags = flags;
926 bs->guest_block_size = 512;
927 bs->request_alignment = 512;
928 bs->zero_beyond_eof = true;
929 open_flags = bdrv_open_flags(bs, flags);
930 bs->read_only = !(open_flags & BDRV_O_RDWR);
931 bs->growable = !!(flags & BDRV_O_PROTOCOL);
932
933 if (use_bdrv_whitelist && !bdrv_is_whitelisted(drv, bs->read_only)) {
934 error_setg(errp,
935 !bs->read_only && bdrv_is_whitelisted(drv, true)
936 ? "Driver '%s' can only be used for read-only devices"
937 : "Driver '%s' is not whitelisted",
938 drv->format_name);
939 return -ENOTSUP;
940 }
941
942 assert(bs->copy_on_read == 0); /* bdrv_new() and bdrv_close() make it so */
943 if (flags & BDRV_O_COPY_ON_READ) {
944 if (!bs->read_only) {
945 bdrv_enable_copy_on_read(bs);
946 } else {
947 error_setg(errp, "Can't use copy-on-read on read-only device");
948 return -EINVAL;
949 }
950 }
951
952 if (filename != NULL) {
953 pstrcpy(bs->filename, sizeof(bs->filename), filename);
954 } else {
955 bs->filename[0] = '\0';
956 }
957
958 bs->drv = drv;
959 bs->opaque = g_malloc0(drv->instance_size);
960
961 bs->enable_write_cache = !!(flags & BDRV_O_CACHE_WB);
962
963 /* Open the image, either directly or using a protocol */
964 if (drv->bdrv_file_open) {
965 assert(file == NULL);
966 assert(!drv->bdrv_needs_filename || filename != NULL);
967 ret = drv->bdrv_file_open(bs, options, open_flags, &local_err);
968 } else {
969 if (file == NULL) {
970 error_setg(errp, "Can't use '%s' as a block driver for the "
971 "protocol level", drv->format_name);
972 ret = -EINVAL;
973 goto free_and_fail;
974 }
975 bs->file = file;
976 ret = drv->bdrv_open(bs, options, open_flags, &local_err);
977 }
978
979 if (ret < 0) {
980 if (local_err) {
981 error_propagate(errp, local_err);
982 } else if (bs->filename[0]) {
983 error_setg_errno(errp, -ret, "Could not open '%s'", bs->filename);
984 } else {
985 error_setg_errno(errp, -ret, "Could not open image");
986 }
987 goto free_and_fail;
988 }
989
990 ret = refresh_total_sectors(bs, bs->total_sectors);
991 if (ret < 0) {
992 error_setg_errno(errp, -ret, "Could not refresh total sector count");
993 goto free_and_fail;
994 }
995
996 bdrv_refresh_limits(bs);
997 assert(bdrv_opt_mem_align(bs) != 0);
998 assert((bs->request_alignment != 0) || bs->sg);
999 return 0;
1000
1001 free_and_fail:
1002 bs->file = NULL;
1003 g_free(bs->opaque);
1004 bs->opaque = NULL;
1005 bs->drv = NULL;
1006 return ret;
1007 }
1008
1009 static QDict *parse_json_filename(const char *filename, Error **errp)
1010 {
1011 QObject *options_obj;
1012 QDict *options;
1013 int ret;
1014
1015 ret = strstart(filename, "json:", &filename);
1016 assert(ret);
1017
1018 options_obj = qobject_from_json(filename);
1019 if (!options_obj) {
1020 error_setg(errp, "Could not parse the JSON options");
1021 return NULL;
1022 }
1023
1024 if (qobject_type(options_obj) != QTYPE_QDICT) {
1025 qobject_decref(options_obj);
1026 error_setg(errp, "Invalid JSON object given");
1027 return NULL;
1028 }
1029
1030 options = qobject_to_qdict(options_obj);
1031 qdict_flatten(options);
1032
1033 return options;
1034 }
1035
1036 /*
1037 * Fills in default options for opening images and converts the legacy
1038 * filename/flags pair to option QDict entries.
1039 */
1040 static int bdrv_fill_options(QDict **options, const char **pfilename, int flags,
1041 BlockDriver *drv, Error **errp)
1042 {
1043 const char *filename = *pfilename;
1044 const char *drvname;
1045 bool protocol = flags & BDRV_O_PROTOCOL;
1046 bool parse_filename = false;
1047 Error *local_err = NULL;
1048
1049 /* Parse json: pseudo-protocol */
1050 if (filename && g_str_has_prefix(filename, "json:")) {
1051 QDict *json_options = parse_json_filename(filename, &local_err);
1052 if (local_err) {
1053 error_propagate(errp, local_err);
1054 return -EINVAL;
1055 }
1056
1057 /* Options given in the filename have lower priority than options
1058 * specified directly */
1059 qdict_join(*options, json_options, false);
1060 QDECREF(json_options);
1061 *pfilename = filename = NULL;
1062 }
1063
1064 /* Fetch the file name from the options QDict if necessary */
1065 if (protocol && filename) {
1066 if (!qdict_haskey(*options, "filename")) {
1067 qdict_put(*options, "filename", qstring_from_str(filename));
1068 parse_filename = true;
1069 } else {
1070 error_setg(errp, "Can't specify 'file' and 'filename' options at "
1071 "the same time");
1072 return -EINVAL;
1073 }
1074 }
1075
1076 /* Find the right block driver */
1077 filename = qdict_get_try_str(*options, "filename");
1078 drvname = qdict_get_try_str(*options, "driver");
1079
1080 if (drv) {
1081 if (drvname) {
1082 error_setg(errp, "Driver specified twice");
1083 return -EINVAL;
1084 }
1085 drvname = drv->format_name;
1086 qdict_put(*options, "driver", qstring_from_str(drvname));
1087 } else {
1088 if (!drvname && protocol) {
1089 if (filename) {
1090 drv = bdrv_find_protocol(filename, parse_filename);
1091 if (!drv) {
1092 error_setg(errp, "Unknown protocol");
1093 return -EINVAL;
1094 }
1095
1096 drvname = drv->format_name;
1097 qdict_put(*options, "driver", qstring_from_str(drvname));
1098 } else {
1099 error_setg(errp, "Must specify either driver or file");
1100 return -EINVAL;
1101 }
1102 } else if (drvname) {
1103 drv = bdrv_find_format(drvname);
1104 if (!drv) {
1105 error_setg(errp, "Unknown driver '%s'", drvname);
1106 return -ENOENT;
1107 }
1108 }
1109 }
1110
1111 assert(drv || !protocol);
1112
1113 /* Driver-specific filename parsing */
1114 if (drv && drv->bdrv_parse_filename && parse_filename) {
1115 drv->bdrv_parse_filename(filename, *options, &local_err);
1116 if (local_err) {
1117 error_propagate(errp, local_err);
1118 return -EINVAL;
1119 }
1120
1121 if (!drv->bdrv_needs_filename) {
1122 qdict_del(*options, "filename");
1123 }
1124 }
1125
1126 return 0;
1127 }
1128
1129 void bdrv_set_backing_hd(BlockDriverState *bs, BlockDriverState *backing_hd)
1130 {
1131
1132 if (bs->backing_hd) {
1133 assert(bs->backing_blocker);
1134 bdrv_op_unblock_all(bs->backing_hd, bs->backing_blocker);
1135 } else if (backing_hd) {
1136 error_setg(&bs->backing_blocker,
1137 "device is used as backing hd of '%s'",
1138 bs->device_name);
1139 }
1140
1141 bs->backing_hd = backing_hd;
1142 if (!backing_hd) {
1143 error_free(bs->backing_blocker);
1144 bs->backing_blocker = NULL;
1145 goto out;
1146 }
1147 bs->open_flags &= ~BDRV_O_NO_BACKING;
1148 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_hd->filename);
1149 pstrcpy(bs->backing_format, sizeof(bs->backing_format),
1150 backing_hd->drv ? backing_hd->drv->format_name : "");
1151
1152 bdrv_op_block_all(bs->backing_hd, bs->backing_blocker);
1153 /* Otherwise we won't be able to commit due to check in bdrv_commit */
1154 bdrv_op_unblock(bs->backing_hd, BLOCK_OP_TYPE_COMMIT,
1155 bs->backing_blocker);
1156 out:
1157 bdrv_refresh_limits(bs);
1158 }
1159
1160 /*
1161 * Opens the backing file for a BlockDriverState if not yet open
1162 *
1163 * options is a QDict of options to pass to the block drivers, or NULL for an
1164 * empty set of options. The reference to the QDict is transferred to this
1165 * function (even on failure), so if the caller intends to reuse the dictionary,
1166 * it needs to use QINCREF() before calling bdrv_file_open.
1167 */
1168 int bdrv_open_backing_file(BlockDriverState *bs, QDict *options, Error **errp)
1169 {
1170 char *backing_filename = g_malloc0(PATH_MAX);
1171 int ret = 0;
1172 BlockDriver *back_drv = NULL;
1173 BlockDriverState *backing_hd;
1174 Error *local_err = NULL;
1175
1176 if (bs->backing_hd != NULL) {
1177 QDECREF(options);
1178 goto free_exit;
1179 }
1180
1181 /* NULL means an empty set of options */
1182 if (options == NULL) {
1183 options = qdict_new();
1184 }
1185
1186 bs->open_flags &= ~BDRV_O_NO_BACKING;
1187 if (qdict_haskey(options, "file.filename")) {
1188 backing_filename[0] = '\0';
1189 } else if (bs->backing_file[0] == '\0' && qdict_size(options) == 0) {
1190 QDECREF(options);
1191 goto free_exit;
1192 } else {
1193 bdrv_get_full_backing_filename(bs, backing_filename, PATH_MAX);
1194 }
1195
1196 if (!bs->drv || !bs->drv->supports_backing) {
1197 ret = -EINVAL;
1198 error_setg(errp, "Driver doesn't support backing files");
1199 QDECREF(options);
1200 goto free_exit;
1201 }
1202
1203 backing_hd = bdrv_new("", errp);
1204
1205 if (bs->backing_format[0] != '\0') {
1206 back_drv = bdrv_find_format(bs->backing_format);
1207 }
1208
1209 assert(bs->backing_hd == NULL);
1210 ret = bdrv_open(&backing_hd,
1211 *backing_filename ? backing_filename : NULL, NULL, options,
1212 bdrv_backing_flags(bs->open_flags), back_drv, &local_err);
1213 if (ret < 0) {
1214 bdrv_unref(backing_hd);
1215 backing_hd = NULL;
1216 bs->open_flags |= BDRV_O_NO_BACKING;
1217 error_setg(errp, "Could not open backing file: %s",
1218 error_get_pretty(local_err));
1219 error_free(local_err);
1220 goto free_exit;
1221 }
1222 bdrv_set_backing_hd(bs, backing_hd);
1223
1224 free_exit:
1225 g_free(backing_filename);
1226 return ret;
1227 }
1228
1229 /*
1230 * Opens a disk image whose options are given as BlockdevRef in another block
1231 * device's options.
1232 *
1233 * If allow_none is true, no image will be opened if filename is false and no
1234 * BlockdevRef is given. *pbs will remain unchanged and 0 will be returned.
1235 *
1236 * bdrev_key specifies the key for the image's BlockdevRef in the options QDict.
1237 * That QDict has to be flattened; therefore, if the BlockdevRef is a QDict
1238 * itself, all options starting with "${bdref_key}." are considered part of the
1239 * BlockdevRef.
1240 *
1241 * The BlockdevRef will be removed from the options QDict.
1242 *
1243 * To conform with the behavior of bdrv_open(), *pbs has to be NULL.
1244 */
1245 int bdrv_open_image(BlockDriverState **pbs, const char *filename,
1246 QDict *options, const char *bdref_key, int flags,
1247 bool allow_none, Error **errp)
1248 {
1249 QDict *image_options;
1250 int ret;
1251 char *bdref_key_dot;
1252 const char *reference;
1253
1254 assert(pbs);
1255 assert(*pbs == NULL);
1256
1257 bdref_key_dot = g_strdup_printf("%s.", bdref_key);
1258 qdict_extract_subqdict(options, &image_options, bdref_key_dot);
1259 g_free(bdref_key_dot);
1260
1261 reference = qdict_get_try_str(options, bdref_key);
1262 if (!filename && !reference && !qdict_size(image_options)) {
1263 if (allow_none) {
1264 ret = 0;
1265 } else {
1266 error_setg(errp, "A block device must be specified for \"%s\"",
1267 bdref_key);
1268 ret = -EINVAL;
1269 }
1270 QDECREF(image_options);
1271 goto done;
1272 }
1273
1274 ret = bdrv_open(pbs, filename, reference, image_options, flags, NULL, errp);
1275
1276 done:
1277 qdict_del(options, bdref_key);
1278 return ret;
1279 }
1280
1281 int bdrv_append_temp_snapshot(BlockDriverState *bs, int flags, Error **errp)
1282 {
1283 /* TODO: extra byte is a hack to ensure MAX_PATH space on Windows. */
1284 char *tmp_filename = g_malloc0(PATH_MAX + 1);
1285 int64_t total_size;
1286 BlockDriver *bdrv_qcow2;
1287 QemuOpts *opts = NULL;
1288 QDict *snapshot_options;
1289 BlockDriverState *bs_snapshot;
1290 Error *local_err;
1291 int ret;
1292
1293 /* if snapshot, we create a temporary backing file and open it
1294 instead of opening 'filename' directly */
1295
1296 /* Get the required size from the image */
1297 total_size = bdrv_getlength(bs);
1298 if (total_size < 0) {
1299 ret = total_size;
1300 error_setg_errno(errp, -total_size, "Could not get image size");
1301 goto out;
1302 }
1303 total_size &= BDRV_SECTOR_MASK;
1304
1305 /* Create the temporary image */
1306 ret = get_tmp_filename(tmp_filename, PATH_MAX + 1);
1307 if (ret < 0) {
1308 error_setg_errno(errp, -ret, "Could not get temporary filename");
1309 goto out;
1310 }
1311
1312 bdrv_qcow2 = bdrv_find_format("qcow2");
1313 opts = qemu_opts_create(bdrv_qcow2->create_opts, NULL, 0,
1314 &error_abort);
1315 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, total_size);
1316 ret = bdrv_create(bdrv_qcow2, tmp_filename, opts, &local_err);
1317 qemu_opts_del(opts);
1318 if (ret < 0) {
1319 error_setg_errno(errp, -ret, "Could not create temporary overlay "
1320 "'%s': %s", tmp_filename,
1321 error_get_pretty(local_err));
1322 error_free(local_err);
1323 goto out;
1324 }
1325
1326 /* Prepare a new options QDict for the temporary file */
1327 snapshot_options = qdict_new();
1328 qdict_put(snapshot_options, "file.driver",
1329 qstring_from_str("file"));
1330 qdict_put(snapshot_options, "file.filename",
1331 qstring_from_str(tmp_filename));
1332
1333 bs_snapshot = bdrv_new("", &error_abort);
1334
1335 ret = bdrv_open(&bs_snapshot, NULL, NULL, snapshot_options,
1336 flags, bdrv_qcow2, &local_err);
1337 if (ret < 0) {
1338 error_propagate(errp, local_err);
1339 goto out;
1340 }
1341
1342 bdrv_append(bs_snapshot, bs);
1343
1344 out:
1345 g_free(tmp_filename);
1346 return ret;
1347 }
1348
1349 /*
1350 * Opens a disk image (raw, qcow2, vmdk, ...)
1351 *
1352 * options is a QDict of options to pass to the block drivers, or NULL for an
1353 * empty set of options. The reference to the QDict belongs to the block layer
1354 * after the call (even on failure), so if the caller intends to reuse the
1355 * dictionary, it needs to use QINCREF() before calling bdrv_open.
1356 *
1357 * If *pbs is NULL, a new BDS will be created with a pointer to it stored there.
1358 * If it is not NULL, the referenced BDS will be reused.
1359 *
1360 * The reference parameter may be used to specify an existing block device which
1361 * should be opened. If specified, neither options nor a filename may be given,
1362 * nor can an existing BDS be reused (that is, *pbs has to be NULL).
1363 */
1364 int bdrv_open(BlockDriverState **pbs, const char *filename,
1365 const char *reference, QDict *options, int flags,
1366 BlockDriver *drv, Error **errp)
1367 {
1368 int ret;
1369 BlockDriverState *file = NULL, *bs;
1370 const char *drvname;
1371 Error *local_err = NULL;
1372 int snapshot_flags = 0;
1373
1374 assert(pbs);
1375
1376 if (reference) {
1377 bool options_non_empty = options ? qdict_size(options) : false;
1378 QDECREF(options);
1379
1380 if (*pbs) {
1381 error_setg(errp, "Cannot reuse an existing BDS when referencing "
1382 "another block device");
1383 return -EINVAL;
1384 }
1385
1386 if (filename || options_non_empty) {
1387 error_setg(errp, "Cannot reference an existing block device with "
1388 "additional options or a new filename");
1389 return -EINVAL;
1390 }
1391
1392 bs = bdrv_lookup_bs(reference, reference, errp);
1393 if (!bs) {
1394 return -ENODEV;
1395 }
1396 bdrv_ref(bs);
1397 *pbs = bs;
1398 return 0;
1399 }
1400
1401 if (*pbs) {
1402 bs = *pbs;
1403 } else {
1404 bs = bdrv_new("", &error_abort);
1405 }
1406
1407 /* NULL means an empty set of options */
1408 if (options == NULL) {
1409 options = qdict_new();
1410 }
1411
1412 ret = bdrv_fill_options(&options, &filename, flags, drv, &local_err);
1413 if (local_err) {
1414 goto fail;
1415 }
1416
1417 /* Find the right image format driver */
1418 drv = NULL;
1419 drvname = qdict_get_try_str(options, "driver");
1420 if (drvname) {
1421 drv = bdrv_find_format(drvname);
1422 qdict_del(options, "driver");
1423 if (!drv) {
1424 error_setg(errp, "Unknown driver: '%s'", drvname);
1425 ret = -EINVAL;
1426 goto fail;
1427 }
1428 }
1429
1430 assert(drvname || !(flags & BDRV_O_PROTOCOL));
1431 if (drv && !drv->bdrv_file_open) {
1432 /* If the user explicitly wants a format driver here, we'll need to add
1433 * another layer for the protocol in bs->file */
1434 flags &= ~BDRV_O_PROTOCOL;
1435 }
1436
1437 bs->options = options;
1438 options = qdict_clone_shallow(options);
1439
1440 /* Open image file without format layer */
1441 if ((flags & BDRV_O_PROTOCOL) == 0) {
1442 if (flags & BDRV_O_RDWR) {
1443 flags |= BDRV_O_ALLOW_RDWR;
1444 }
1445 if (flags & BDRV_O_SNAPSHOT) {
1446 snapshot_flags = bdrv_temp_snapshot_flags(flags);
1447 flags = bdrv_backing_flags(flags);
1448 }
1449
1450 assert(file == NULL);
1451 ret = bdrv_open_image(&file, filename, options, "file",
1452 bdrv_inherited_flags(flags),
1453 true, &local_err);
1454 if (ret < 0) {
1455 goto fail;
1456 }
1457 }
1458
1459 /* Image format probing */
1460 if (!drv && file) {
1461 ret = find_image_format(file, filename, &drv, &local_err);
1462 if (ret < 0) {
1463 goto fail;
1464 }
1465 } else if (!drv) {
1466 error_setg(errp, "Must specify either driver or file");
1467 ret = -EINVAL;
1468 goto fail;
1469 }
1470
1471 /* Open the image */
1472 ret = bdrv_open_common(bs, file, options, flags, drv, &local_err);
1473 if (ret < 0) {
1474 goto fail;
1475 }
1476
1477 if (file && (bs->file != file)) {
1478 bdrv_unref(file);
1479 file = NULL;
1480 }
1481
1482 /* If there is a backing file, use it */
1483 if ((flags & BDRV_O_NO_BACKING) == 0) {
1484 QDict *backing_options;
1485
1486 qdict_extract_subqdict(options, &backing_options, "backing.");
1487 ret = bdrv_open_backing_file(bs, backing_options, &local_err);
1488 if (ret < 0) {
1489 goto close_and_fail;
1490 }
1491 }
1492
1493 /* For snapshot=on, create a temporary qcow2 overlay. bs points to the
1494 * temporary snapshot afterwards. */
1495 if (snapshot_flags) {
1496 ret = bdrv_append_temp_snapshot(bs, snapshot_flags, &local_err);
1497 if (local_err) {
1498 goto close_and_fail;
1499 }
1500 }
1501
1502 /* Check if any unknown options were used */
1503 if (options && (qdict_size(options) != 0)) {
1504 const QDictEntry *entry = qdict_first(options);
1505 if (flags & BDRV_O_PROTOCOL) {
1506 error_setg(errp, "Block protocol '%s' doesn't support the option "
1507 "'%s'", drv->format_name, entry->key);
1508 } else {
1509 error_setg(errp, "Block format '%s' used by device '%s' doesn't "
1510 "support the option '%s'", drv->format_name,
1511 bs->device_name, entry->key);
1512 }
1513
1514 ret = -EINVAL;
1515 goto close_and_fail;
1516 }
1517
1518 if (!bdrv_key_required(bs)) {
1519 bdrv_dev_change_media_cb(bs, true);
1520 } else if (!runstate_check(RUN_STATE_PRELAUNCH)
1521 && !runstate_check(RUN_STATE_INMIGRATE)
1522 && !runstate_check(RUN_STATE_PAUSED)) { /* HACK */
1523 error_setg(errp,
1524 "Guest must be stopped for opening of encrypted image");
1525 ret = -EBUSY;
1526 goto close_and_fail;
1527 }
1528
1529 QDECREF(options);
1530 *pbs = bs;
1531 return 0;
1532
1533 fail:
1534 if (file != NULL) {
1535 bdrv_unref(file);
1536 }
1537 QDECREF(bs->options);
1538 QDECREF(options);
1539 bs->options = NULL;
1540 if (!*pbs) {
1541 /* If *pbs is NULL, a new BDS has been created in this function and
1542 needs to be freed now. Otherwise, it does not need to be closed,
1543 since it has not really been opened yet. */
1544 bdrv_unref(bs);
1545 }
1546 if (local_err) {
1547 error_propagate(errp, local_err);
1548 }
1549 return ret;
1550
1551 close_and_fail:
1552 /* See fail path, but now the BDS has to be always closed */
1553 if (*pbs) {
1554 bdrv_close(bs);
1555 } else {
1556 bdrv_unref(bs);
1557 }
1558 QDECREF(options);
1559 if (local_err) {
1560 error_propagate(errp, local_err);
1561 }
1562 return ret;
1563 }
1564
1565 typedef struct BlockReopenQueueEntry {
1566 bool prepared;
1567 BDRVReopenState state;
1568 QSIMPLEQ_ENTRY(BlockReopenQueueEntry) entry;
1569 } BlockReopenQueueEntry;
1570
1571 /*
1572 * Adds a BlockDriverState to a simple queue for an atomic, transactional
1573 * reopen of multiple devices.
1574 *
1575 * bs_queue can either be an existing BlockReopenQueue that has had QSIMPLE_INIT
1576 * already performed, or alternatively may be NULL a new BlockReopenQueue will
1577 * be created and initialized. This newly created BlockReopenQueue should be
1578 * passed back in for subsequent calls that are intended to be of the same
1579 * atomic 'set'.
1580 *
1581 * bs is the BlockDriverState to add to the reopen queue.
1582 *
1583 * flags contains the open flags for the associated bs
1584 *
1585 * returns a pointer to bs_queue, which is either the newly allocated
1586 * bs_queue, or the existing bs_queue being used.
1587 *
1588 */
1589 BlockReopenQueue *bdrv_reopen_queue(BlockReopenQueue *bs_queue,
1590 BlockDriverState *bs, int flags)
1591 {
1592 assert(bs != NULL);
1593
1594 BlockReopenQueueEntry *bs_entry;
1595 if (bs_queue == NULL) {
1596 bs_queue = g_new0(BlockReopenQueue, 1);
1597 QSIMPLEQ_INIT(bs_queue);
1598 }
1599
1600 /* bdrv_open() masks this flag out */
1601 flags &= ~BDRV_O_PROTOCOL;
1602
1603 if (bs->file) {
1604 bdrv_reopen_queue(bs_queue, bs->file, bdrv_inherited_flags(flags));
1605 }
1606
1607 bs_entry = g_new0(BlockReopenQueueEntry, 1);
1608 QSIMPLEQ_INSERT_TAIL(bs_queue, bs_entry, entry);
1609
1610 bs_entry->state.bs = bs;
1611 bs_entry->state.flags = flags;
1612
1613 return bs_queue;
1614 }
1615
1616 /*
1617 * Reopen multiple BlockDriverStates atomically & transactionally.
1618 *
1619 * The queue passed in (bs_queue) must have been built up previous
1620 * via bdrv_reopen_queue().
1621 *
1622 * Reopens all BDS specified in the queue, with the appropriate
1623 * flags. All devices are prepared for reopen, and failure of any
1624 * device will cause all device changes to be abandonded, and intermediate
1625 * data cleaned up.
1626 *
1627 * If all devices prepare successfully, then the changes are committed
1628 * to all devices.
1629 *
1630 */
1631 int bdrv_reopen_multiple(BlockReopenQueue *bs_queue, Error **errp)
1632 {
1633 int ret = -1;
1634 BlockReopenQueueEntry *bs_entry, *next;
1635 Error *local_err = NULL;
1636
1637 assert(bs_queue != NULL);
1638
1639 bdrv_drain_all();
1640
1641 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1642 if (bdrv_reopen_prepare(&bs_entry->state, bs_queue, &local_err)) {
1643 error_propagate(errp, local_err);
1644 goto cleanup;
1645 }
1646 bs_entry->prepared = true;
1647 }
1648
1649 /* If we reach this point, we have success and just need to apply the
1650 * changes
1651 */
1652 QSIMPLEQ_FOREACH(bs_entry, bs_queue, entry) {
1653 bdrv_reopen_commit(&bs_entry->state);
1654 }
1655
1656 ret = 0;
1657
1658 cleanup:
1659 QSIMPLEQ_FOREACH_SAFE(bs_entry, bs_queue, entry, next) {
1660 if (ret && bs_entry->prepared) {
1661 bdrv_reopen_abort(&bs_entry->state);
1662 }
1663 g_free(bs_entry);
1664 }
1665 g_free(bs_queue);
1666 return ret;
1667 }
1668
1669
1670 /* Reopen a single BlockDriverState with the specified flags. */
1671 int bdrv_reopen(BlockDriverState *bs, int bdrv_flags, Error **errp)
1672 {
1673 int ret = -1;
1674 Error *local_err = NULL;
1675 BlockReopenQueue *queue = bdrv_reopen_queue(NULL, bs, bdrv_flags);
1676
1677 ret = bdrv_reopen_multiple(queue, &local_err);
1678 if (local_err != NULL) {
1679 error_propagate(errp, local_err);
1680 }
1681 return ret;
1682 }
1683
1684
1685 /*
1686 * Prepares a BlockDriverState for reopen. All changes are staged in the
1687 * 'opaque' field of the BDRVReopenState, which is used and allocated by
1688 * the block driver layer .bdrv_reopen_prepare()
1689 *
1690 * bs is the BlockDriverState to reopen
1691 * flags are the new open flags
1692 * queue is the reopen queue
1693 *
1694 * Returns 0 on success, non-zero on error. On error errp will be set
1695 * as well.
1696 *
1697 * On failure, bdrv_reopen_abort() will be called to clean up any data.
1698 * It is the responsibility of the caller to then call the abort() or
1699 * commit() for any other BDS that have been left in a prepare() state
1700 *
1701 */
1702 int bdrv_reopen_prepare(BDRVReopenState *reopen_state, BlockReopenQueue *queue,
1703 Error **errp)
1704 {
1705 int ret = -1;
1706 Error *local_err = NULL;
1707 BlockDriver *drv;
1708
1709 assert(reopen_state != NULL);
1710 assert(reopen_state->bs->drv != NULL);
1711 drv = reopen_state->bs->drv;
1712
1713 /* if we are to stay read-only, do not allow permission change
1714 * to r/w */
1715 if (!(reopen_state->bs->open_flags & BDRV_O_ALLOW_RDWR) &&
1716 reopen_state->flags & BDRV_O_RDWR) {
1717 error_set(errp, QERR_DEVICE_IS_READ_ONLY,
1718 reopen_state->bs->device_name);
1719 goto error;
1720 }
1721
1722
1723 ret = bdrv_flush(reopen_state->bs);
1724 if (ret) {
1725 error_set(errp, ERROR_CLASS_GENERIC_ERROR, "Error (%s) flushing drive",
1726 strerror(-ret));
1727 goto error;
1728 }
1729
1730 if (drv->bdrv_reopen_prepare) {
1731 ret = drv->bdrv_reopen_prepare(reopen_state, queue, &local_err);
1732 if (ret) {
1733 if (local_err != NULL) {
1734 error_propagate(errp, local_err);
1735 } else {
1736 error_setg(errp, "failed while preparing to reopen image '%s'",
1737 reopen_state->bs->filename);
1738 }
1739 goto error;
1740 }
1741 } else {
1742 /* It is currently mandatory to have a bdrv_reopen_prepare()
1743 * handler for each supported drv. */
1744 error_set(errp, QERR_BLOCK_FORMAT_FEATURE_NOT_SUPPORTED,
1745 drv->format_name, reopen_state->bs->device_name,
1746 "reopening of file");
1747 ret = -1;
1748 goto error;
1749 }
1750
1751 ret = 0;
1752
1753 error:
1754 return ret;
1755 }
1756
1757 /*
1758 * Takes the staged changes for the reopen from bdrv_reopen_prepare(), and
1759 * makes them final by swapping the staging BlockDriverState contents into
1760 * the active BlockDriverState contents.
1761 */
1762 void bdrv_reopen_commit(BDRVReopenState *reopen_state)
1763 {
1764 BlockDriver *drv;
1765
1766 assert(reopen_state != NULL);
1767 drv = reopen_state->bs->drv;
1768 assert(drv != NULL);
1769
1770 /* If there are any driver level actions to take */
1771 if (drv->bdrv_reopen_commit) {
1772 drv->bdrv_reopen_commit(reopen_state);
1773 }
1774
1775 /* set BDS specific flags now */
1776 reopen_state->bs->open_flags = reopen_state->flags;
1777 reopen_state->bs->enable_write_cache = !!(reopen_state->flags &
1778 BDRV_O_CACHE_WB);
1779 reopen_state->bs->read_only = !(reopen_state->flags & BDRV_O_RDWR);
1780
1781 bdrv_refresh_limits(reopen_state->bs);
1782 }
1783
1784 /*
1785 * Abort the reopen, and delete and free the staged changes in
1786 * reopen_state
1787 */
1788 void bdrv_reopen_abort(BDRVReopenState *reopen_state)
1789 {
1790 BlockDriver *drv;
1791
1792 assert(reopen_state != NULL);
1793 drv = reopen_state->bs->drv;
1794 assert(drv != NULL);
1795
1796 if (drv->bdrv_reopen_abort) {
1797 drv->bdrv_reopen_abort(reopen_state);
1798 }
1799 }
1800
1801
1802 void bdrv_close(BlockDriverState *bs)
1803 {
1804 if (bs->job) {
1805 block_job_cancel_sync(bs->job);
1806 }
1807 bdrv_drain_all(); /* complete I/O */
1808 bdrv_flush(bs);
1809 bdrv_drain_all(); /* in case flush left pending I/O */
1810 notifier_list_notify(&bs->close_notifiers, bs);
1811
1812 if (bs->drv) {
1813 if (bs->backing_hd) {
1814 BlockDriverState *backing_hd = bs->backing_hd;
1815 bdrv_set_backing_hd(bs, NULL);
1816 bdrv_unref(backing_hd);
1817 }
1818 bs->drv->bdrv_close(bs);
1819 g_free(bs->opaque);
1820 bs->opaque = NULL;
1821 bs->drv = NULL;
1822 bs->copy_on_read = 0;
1823 bs->backing_file[0] = '\0';
1824 bs->backing_format[0] = '\0';
1825 bs->total_sectors = 0;
1826 bs->encrypted = 0;
1827 bs->valid_key = 0;
1828 bs->sg = 0;
1829 bs->growable = 0;
1830 bs->zero_beyond_eof = false;
1831 QDECREF(bs->options);
1832 bs->options = NULL;
1833
1834 if (bs->file != NULL) {
1835 bdrv_unref(bs->file);
1836 bs->file = NULL;
1837 }
1838 }
1839
1840 bdrv_dev_change_media_cb(bs, false);
1841
1842 /*throttling disk I/O limits*/
1843 if (bs->io_limits_enabled) {
1844 bdrv_io_limits_disable(bs);
1845 }
1846 }
1847
1848 void bdrv_close_all(void)
1849 {
1850 BlockDriverState *bs;
1851
1852 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1853 AioContext *aio_context = bdrv_get_aio_context(bs);
1854
1855 aio_context_acquire(aio_context);
1856 bdrv_close(bs);
1857 aio_context_release(aio_context);
1858 }
1859 }
1860
1861 /* Check if any requests are in-flight (including throttled requests) */
1862 static bool bdrv_requests_pending(BlockDriverState *bs)
1863 {
1864 if (!QLIST_EMPTY(&bs->tracked_requests)) {
1865 return true;
1866 }
1867 if (!qemu_co_queue_empty(&bs->throttled_reqs[0])) {
1868 return true;
1869 }
1870 if (!qemu_co_queue_empty(&bs->throttled_reqs[1])) {
1871 return true;
1872 }
1873 if (bs->file && bdrv_requests_pending(bs->file)) {
1874 return true;
1875 }
1876 if (bs->backing_hd && bdrv_requests_pending(bs->backing_hd)) {
1877 return true;
1878 }
1879 return false;
1880 }
1881
1882 /*
1883 * Wait for pending requests to complete across all BlockDriverStates
1884 *
1885 * This function does not flush data to disk, use bdrv_flush_all() for that
1886 * after calling this function.
1887 *
1888 * Note that completion of an asynchronous I/O operation can trigger any
1889 * number of other I/O operations on other devices---for example a coroutine
1890 * can be arbitrarily complex and a constant flow of I/O can come until the
1891 * coroutine is complete. Because of this, it is not possible to have a
1892 * function to drain a single device's I/O queue.
1893 */
1894 void bdrv_drain_all(void)
1895 {
1896 /* Always run first iteration so any pending completion BHs run */
1897 bool busy = true;
1898 BlockDriverState *bs;
1899
1900 while (busy) {
1901 busy = false;
1902
1903 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
1904 AioContext *aio_context = bdrv_get_aio_context(bs);
1905 bool bs_busy;
1906
1907 aio_context_acquire(aio_context);
1908 bdrv_start_throttled_reqs(bs);
1909 bs_busy = bdrv_requests_pending(bs);
1910 bs_busy |= aio_poll(aio_context, bs_busy);
1911 aio_context_release(aio_context);
1912
1913 busy |= bs_busy;
1914 }
1915 }
1916 }
1917
1918 /* make a BlockDriverState anonymous by removing from bdrv_state and
1919 * graph_bdrv_state list.
1920 Also, NULL terminate the device_name to prevent double remove */
1921 void bdrv_make_anon(BlockDriverState *bs)
1922 {
1923 if (bs->device_name[0] != '\0') {
1924 QTAILQ_REMOVE(&bdrv_states, bs, device_list);
1925 }
1926 bs->device_name[0] = '\0';
1927 if (bs->node_name[0] != '\0') {
1928 QTAILQ_REMOVE(&graph_bdrv_states, bs, node_list);
1929 }
1930 bs->node_name[0] = '\0';
1931 }
1932
1933 static void bdrv_rebind(BlockDriverState *bs)
1934 {
1935 if (bs->drv && bs->drv->bdrv_rebind) {
1936 bs->drv->bdrv_rebind(bs);
1937 }
1938 }
1939
1940 static void bdrv_move_feature_fields(BlockDriverState *bs_dest,
1941 BlockDriverState *bs_src)
1942 {
1943 /* move some fields that need to stay attached to the device */
1944
1945 /* dev info */
1946 bs_dest->dev_ops = bs_src->dev_ops;
1947 bs_dest->dev_opaque = bs_src->dev_opaque;
1948 bs_dest->dev = bs_src->dev;
1949 bs_dest->guest_block_size = bs_src->guest_block_size;
1950 bs_dest->copy_on_read = bs_src->copy_on_read;
1951
1952 bs_dest->enable_write_cache = bs_src->enable_write_cache;
1953
1954 /* i/o throttled req */
1955 memcpy(&bs_dest->throttle_state,
1956 &bs_src->throttle_state,
1957 sizeof(ThrottleState));
1958 bs_dest->throttled_reqs[0] = bs_src->throttled_reqs[0];
1959 bs_dest->throttled_reqs[1] = bs_src->throttled_reqs[1];
1960 bs_dest->io_limits_enabled = bs_src->io_limits_enabled;
1961
1962 /* r/w error */
1963 bs_dest->on_read_error = bs_src->on_read_error;
1964 bs_dest->on_write_error = bs_src->on_write_error;
1965
1966 /* i/o status */
1967 bs_dest->iostatus_enabled = bs_src->iostatus_enabled;
1968 bs_dest->iostatus = bs_src->iostatus;
1969
1970 /* dirty bitmap */
1971 bs_dest->dirty_bitmaps = bs_src->dirty_bitmaps;
1972
1973 /* reference count */
1974 bs_dest->refcnt = bs_src->refcnt;
1975
1976 /* job */
1977 bs_dest->job = bs_src->job;
1978
1979 /* keep the same entry in bdrv_states */
1980 pstrcpy(bs_dest->device_name, sizeof(bs_dest->device_name),
1981 bs_src->device_name);
1982 bs_dest->device_list = bs_src->device_list;
1983 memcpy(bs_dest->op_blockers, bs_src->op_blockers,
1984 sizeof(bs_dest->op_blockers));
1985 }
1986
1987 /*
1988 * Swap bs contents for two image chains while they are live,
1989 * while keeping required fields on the BlockDriverState that is
1990 * actually attached to a device.
1991 *
1992 * This will modify the BlockDriverState fields, and swap contents
1993 * between bs_new and bs_old. Both bs_new and bs_old are modified.
1994 *
1995 * bs_new is required to be anonymous.
1996 *
1997 * This function does not create any image files.
1998 */
1999 void bdrv_swap(BlockDriverState *bs_new, BlockDriverState *bs_old)
2000 {
2001 BlockDriverState tmp;
2002
2003 /* The code needs to swap the node_name but simply swapping node_list won't
2004 * work so first remove the nodes from the graph list, do the swap then
2005 * insert them back if needed.
2006 */
2007 if (bs_new->node_name[0] != '\0') {
2008 QTAILQ_REMOVE(&graph_bdrv_states, bs_new, node_list);
2009 }
2010 if (bs_old->node_name[0] != '\0') {
2011 QTAILQ_REMOVE(&graph_bdrv_states, bs_old, node_list);
2012 }
2013
2014 /* bs_new must be anonymous and shouldn't have anything fancy enabled */
2015 assert(bs_new->device_name[0] == '\0');
2016 assert(QLIST_EMPTY(&bs_new->dirty_bitmaps));
2017 assert(bs_new->job == NULL);
2018 assert(bs_new->dev == NULL);
2019 assert(bs_new->io_limits_enabled == false);
2020 assert(!throttle_have_timer(&bs_new->throttle_state));
2021
2022 tmp = *bs_new;
2023 *bs_new = *bs_old;
2024 *bs_old = tmp;
2025
2026 /* there are some fields that should not be swapped, move them back */
2027 bdrv_move_feature_fields(&tmp, bs_old);
2028 bdrv_move_feature_fields(bs_old, bs_new);
2029 bdrv_move_feature_fields(bs_new, &tmp);
2030
2031 /* bs_new shouldn't be in bdrv_states even after the swap! */
2032 assert(bs_new->device_name[0] == '\0');
2033
2034 /* Check a few fields that should remain attached to the device */
2035 assert(bs_new->dev == NULL);
2036 assert(bs_new->job == NULL);
2037 assert(bs_new->io_limits_enabled == false);
2038 assert(!throttle_have_timer(&bs_new->throttle_state));
2039
2040 /* insert the nodes back into the graph node list if needed */
2041 if (bs_new->node_name[0] != '\0') {
2042 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_new, node_list);
2043 }
2044 if (bs_old->node_name[0] != '\0') {
2045 QTAILQ_INSERT_TAIL(&graph_bdrv_states, bs_old, node_list);
2046 }
2047
2048 bdrv_rebind(bs_new);
2049 bdrv_rebind(bs_old);
2050 }
2051
2052 /*
2053 * Add new bs contents at the top of an image chain while the chain is
2054 * live, while keeping required fields on the top layer.
2055 *
2056 * This will modify the BlockDriverState fields, and swap contents
2057 * between bs_new and bs_top. Both bs_new and bs_top are modified.
2058 *
2059 * bs_new is required to be anonymous.
2060 *
2061 * This function does not create any image files.
2062 */
2063 void bdrv_append(BlockDriverState *bs_new, BlockDriverState *bs_top)
2064 {
2065 bdrv_swap(bs_new, bs_top);
2066
2067 /* The contents of 'tmp' will become bs_top, as we are
2068 * swapping bs_new and bs_top contents. */
2069 bdrv_set_backing_hd(bs_top, bs_new);
2070 }
2071
2072 static void bdrv_delete(BlockDriverState *bs)
2073 {
2074 assert(!bs->dev);
2075 assert(!bs->job);
2076 assert(bdrv_op_blocker_is_empty(bs));
2077 assert(!bs->refcnt);
2078 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
2079
2080 bdrv_close(bs);
2081
2082 /* remove from list, if necessary */
2083 bdrv_make_anon(bs);
2084
2085 g_free(bs);
2086 }
2087
2088 int bdrv_attach_dev(BlockDriverState *bs, void *dev)
2089 /* TODO change to DeviceState *dev when all users are qdevified */
2090 {
2091 if (bs->dev) {
2092 return -EBUSY;
2093 }
2094 bs->dev = dev;
2095 bdrv_iostatus_reset(bs);
2096 return 0;
2097 }
2098
2099 /* TODO qdevified devices don't use this, remove when devices are qdevified */
2100 void bdrv_attach_dev_nofail(BlockDriverState *bs, void *dev)
2101 {
2102 if (bdrv_attach_dev(bs, dev) < 0) {
2103 abort();
2104 }
2105 }
2106
2107 void bdrv_detach_dev(BlockDriverState *bs, void *dev)
2108 /* TODO change to DeviceState *dev when all users are qdevified */
2109 {
2110 assert(bs->dev == dev);
2111 bs->dev = NULL;
2112 bs->dev_ops = NULL;
2113 bs->dev_opaque = NULL;
2114 bs->guest_block_size = 512;
2115 }
2116
2117 /* TODO change to return DeviceState * when all users are qdevified */
2118 void *bdrv_get_attached_dev(BlockDriverState *bs)
2119 {
2120 return bs->dev;
2121 }
2122
2123 void bdrv_set_dev_ops(BlockDriverState *bs, const BlockDevOps *ops,
2124 void *opaque)
2125 {
2126 bs->dev_ops = ops;
2127 bs->dev_opaque = opaque;
2128 }
2129
2130 static void bdrv_dev_change_media_cb(BlockDriverState *bs, bool load)
2131 {
2132 if (bs->dev_ops && bs->dev_ops->change_media_cb) {
2133 bool tray_was_closed = !bdrv_dev_is_tray_open(bs);
2134 bs->dev_ops->change_media_cb(bs->dev_opaque, load);
2135 if (tray_was_closed) {
2136 /* tray open */
2137 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2138 true, &error_abort);
2139 }
2140 if (load) {
2141 /* tray close */
2142 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
2143 false, &error_abort);
2144 }
2145 }
2146 }
2147
2148 bool bdrv_dev_has_removable_media(BlockDriverState *bs)
2149 {
2150 return !bs->dev || (bs->dev_ops && bs->dev_ops->change_media_cb);
2151 }
2152
2153 void bdrv_dev_eject_request(BlockDriverState *bs, bool force)
2154 {
2155 if (bs->dev_ops && bs->dev_ops->eject_request_cb) {
2156 bs->dev_ops->eject_request_cb(bs->dev_opaque, force);
2157 }
2158 }
2159
2160 bool bdrv_dev_is_tray_open(BlockDriverState *bs)
2161 {
2162 if (bs->dev_ops && bs->dev_ops->is_tray_open) {
2163 return bs->dev_ops->is_tray_open(bs->dev_opaque);
2164 }
2165 return false;
2166 }
2167
2168 static void bdrv_dev_resize_cb(BlockDriverState *bs)
2169 {
2170 if (bs->dev_ops && bs->dev_ops->resize_cb) {
2171 bs->dev_ops->resize_cb(bs->dev_opaque);
2172 }
2173 }
2174
2175 bool bdrv_dev_is_medium_locked(BlockDriverState *bs)
2176 {
2177 if (bs->dev_ops && bs->dev_ops->is_medium_locked) {
2178 return bs->dev_ops->is_medium_locked(bs->dev_opaque);
2179 }
2180 return false;
2181 }
2182
2183 /*
2184 * Run consistency checks on an image
2185 *
2186 * Returns 0 if the check could be completed (it doesn't mean that the image is
2187 * free of errors) or -errno when an internal error occurred. The results of the
2188 * check are stored in res.
2189 */
2190 int bdrv_check(BlockDriverState *bs, BdrvCheckResult *res, BdrvCheckMode fix)
2191 {
2192 if (bs->drv->bdrv_check == NULL) {
2193 return -ENOTSUP;
2194 }
2195
2196 memset(res, 0, sizeof(*res));
2197 return bs->drv->bdrv_check(bs, res, fix);
2198 }
2199
2200 #define COMMIT_BUF_SECTORS 2048
2201
2202 /* commit COW file into the raw image */
2203 int bdrv_commit(BlockDriverState *bs)
2204 {
2205 BlockDriver *drv = bs->drv;
2206 int64_t sector, total_sectors, length, backing_length;
2207 int n, ro, open_flags;
2208 int ret = 0;
2209 uint8_t *buf = NULL;
2210 char filename[PATH_MAX];
2211
2212 if (!drv)
2213 return -ENOMEDIUM;
2214
2215 if (!bs->backing_hd) {
2216 return -ENOTSUP;
2217 }
2218
2219 if (bdrv_op_is_blocked(bs, BLOCK_OP_TYPE_COMMIT, NULL) ||
2220 bdrv_op_is_blocked(bs->backing_hd, BLOCK_OP_TYPE_COMMIT, NULL)) {
2221 return -EBUSY;
2222 }
2223
2224 ro = bs->backing_hd->read_only;
2225 /* Use pstrcpy (not strncpy): filename must be NUL-terminated. */
2226 pstrcpy(filename, sizeof(filename), bs->backing_hd->filename);
2227 open_flags = bs->backing_hd->open_flags;
2228
2229 if (ro) {
2230 if (bdrv_reopen(bs->backing_hd, open_flags | BDRV_O_RDWR, NULL)) {
2231 return -EACCES;
2232 }
2233 }
2234
2235 length = bdrv_getlength(bs);
2236 if (length < 0) {
2237 ret = length;
2238 goto ro_cleanup;
2239 }
2240
2241 backing_length = bdrv_getlength(bs->backing_hd);
2242 if (backing_length < 0) {
2243 ret = backing_length;
2244 goto ro_cleanup;
2245 }
2246
2247 /* If our top snapshot is larger than the backing file image,
2248 * grow the backing file image if possible. If not possible,
2249 * we must return an error */
2250 if (length > backing_length) {
2251 ret = bdrv_truncate(bs->backing_hd, length);
2252 if (ret < 0) {
2253 goto ro_cleanup;
2254 }
2255 }
2256
2257 total_sectors = length >> BDRV_SECTOR_BITS;
2258 buf = g_malloc(COMMIT_BUF_SECTORS * BDRV_SECTOR_SIZE);
2259
2260 for (sector = 0; sector < total_sectors; sector += n) {
2261 ret = bdrv_is_allocated(bs, sector, COMMIT_BUF_SECTORS, &n);
2262 if (ret < 0) {
2263 goto ro_cleanup;
2264 }
2265 if (ret) {
2266 ret = bdrv_read(bs, sector, buf, n);
2267 if (ret < 0) {
2268 goto ro_cleanup;
2269 }
2270
2271 ret = bdrv_write(bs->backing_hd, sector, buf, n);
2272 if (ret < 0) {
2273 goto ro_cleanup;
2274 }
2275 }
2276 }
2277
2278 if (drv->bdrv_make_empty) {
2279 ret = drv->bdrv_make_empty(bs);
2280 if (ret < 0) {
2281 goto ro_cleanup;
2282 }
2283 bdrv_flush(bs);
2284 }
2285
2286 /*
2287 * Make sure all data we wrote to the backing device is actually
2288 * stable on disk.
2289 */
2290 if (bs->backing_hd) {
2291 bdrv_flush(bs->backing_hd);
2292 }
2293
2294 ret = 0;
2295 ro_cleanup:
2296 g_free(buf);
2297
2298 if (ro) {
2299 /* ignoring error return here */
2300 bdrv_reopen(bs->backing_hd, open_flags & ~BDRV_O_RDWR, NULL);
2301 }
2302
2303 return ret;
2304 }
2305
2306 int bdrv_commit_all(void)
2307 {
2308 BlockDriverState *bs;
2309
2310 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
2311 AioContext *aio_context = bdrv_get_aio_context(bs);
2312
2313 aio_context_acquire(aio_context);
2314 if (bs->drv && bs->backing_hd) {
2315 int ret = bdrv_commit(bs);
2316 if (ret < 0) {
2317 aio_context_release(aio_context);
2318 return ret;
2319 }
2320 }
2321 aio_context_release(aio_context);
2322 }
2323 return 0;
2324 }
2325
2326 /**
2327 * Remove an active request from the tracked requests list
2328 *
2329 * This function should be called when a tracked request is completing.
2330 */
2331 static void tracked_request_end(BdrvTrackedRequest *req)
2332 {
2333 if (req->serialising) {
2334 req->bs->serialising_in_flight--;
2335 }
2336
2337 QLIST_REMOVE(req, list);
2338 qemu_co_queue_restart_all(&req->wait_queue);
2339 }
2340
2341 /**
2342 * Add an active request to the tracked requests list
2343 */
2344 static void tracked_request_begin(BdrvTrackedRequest *req,
2345 BlockDriverState *bs,
2346 int64_t offset,
2347 unsigned int bytes, bool is_write)
2348 {
2349 *req = (BdrvTrackedRequest){
2350 .bs = bs,
2351 .offset = offset,
2352 .bytes = bytes,
2353 .is_write = is_write,
2354 .co = qemu_coroutine_self(),
2355 .serialising = false,
2356 .overlap_offset = offset,
2357 .overlap_bytes = bytes,
2358 };
2359
2360 qemu_co_queue_init(&req->wait_queue);
2361
2362 QLIST_INSERT_HEAD(&bs->tracked_requests, req, list);
2363 }
2364
2365 static void mark_request_serialising(BdrvTrackedRequest *req, uint64_t align)
2366 {
2367 int64_t overlap_offset = req->offset & ~(align - 1);
2368 unsigned int overlap_bytes = ROUND_UP(req->offset + req->bytes, align)
2369 - overlap_offset;
2370
2371 if (!req->serialising) {
2372 req->bs->serialising_in_flight++;
2373 req->serialising = true;
2374 }
2375
2376 req->overlap_offset = MIN(req->overlap_offset, overlap_offset);
2377 req->overlap_bytes = MAX(req->overlap_bytes, overlap_bytes);
2378 }
2379
2380 /**
2381 * Round a region to cluster boundaries
2382 */
2383 void bdrv_round_to_clusters(BlockDriverState *bs,
2384 int64_t sector_num, int nb_sectors,
2385 int64_t *cluster_sector_num,
2386 int *cluster_nb_sectors)
2387 {
2388 BlockDriverInfo bdi;
2389
2390 if (bdrv_get_info(bs, &bdi) < 0 || bdi.cluster_size == 0) {
2391 *cluster_sector_num = sector_num;
2392 *cluster_nb_sectors = nb_sectors;
2393 } else {
2394 int64_t c = bdi.cluster_size / BDRV_SECTOR_SIZE;
2395 *cluster_sector_num = QEMU_ALIGN_DOWN(sector_num, c);
2396 *cluster_nb_sectors = QEMU_ALIGN_UP(sector_num - *cluster_sector_num +
2397 nb_sectors, c);
2398 }
2399 }
2400
2401 static int bdrv_get_cluster_size(BlockDriverState *bs)
2402 {
2403 BlockDriverInfo bdi;
2404 int ret;
2405
2406 ret = bdrv_get_info(bs, &bdi);
2407 if (ret < 0 || bdi.cluster_size == 0) {
2408 return bs->request_alignment;
2409 } else {
2410 return bdi.cluster_size;
2411 }
2412 }
2413
2414 static bool tracked_request_overlaps(BdrvTrackedRequest *req,
2415 int64_t offset, unsigned int bytes)
2416 {
2417 /* aaaa bbbb */
2418 if (offset >= req->overlap_offset + req->overlap_bytes) {
2419 return false;
2420 }
2421 /* bbbb aaaa */
2422 if (req->overlap_offset >= offset + bytes) {
2423 return false;
2424 }
2425 return true;
2426 }
2427
2428 static bool coroutine_fn wait_serialising_requests(BdrvTrackedRequest *self)
2429 {
2430 BlockDriverState *bs = self->bs;
2431 BdrvTrackedRequest *req;
2432 bool retry;
2433 bool waited = false;
2434
2435 if (!bs->serialising_in_flight) {
2436 return false;
2437 }
2438
2439 do {
2440 retry = false;
2441 QLIST_FOREACH(req, &bs->tracked_requests, list) {
2442 if (req == self || (!req->serialising && !self->serialising)) {
2443 continue;
2444 }
2445 if (tracked_request_overlaps(req, self->overlap_offset,
2446 self->overlap_bytes))
2447 {
2448 /* Hitting this means there was a reentrant request, for
2449 * example, a block driver issuing nested requests. This must
2450 * never happen since it means deadlock.
2451 */
2452 assert(qemu_coroutine_self() != req->co);
2453
2454 /* If the request is already (indirectly) waiting for us, or
2455 * will wait for us as soon as it wakes up, then just go on
2456 * (instead of producing a deadlock in the former case). */
2457 if (!req->waiting_for) {
2458 self->waiting_for = req;
2459 qemu_co_queue_wait(&req->wait_queue);
2460 self->waiting_for = NULL;
2461 retry = true;
2462 waited = true;
2463 break;
2464 }
2465 }
2466 }
2467 } while (retry);
2468
2469 return waited;
2470 }
2471
2472 /*
2473 * Return values:
2474 * 0 - success
2475 * -EINVAL - backing format specified, but no file
2476 * -ENOSPC - can't update the backing file because no space is left in the
2477 * image file header
2478 * -ENOTSUP - format driver doesn't support changing the backing file
2479 */
2480 int bdrv_change_backing_file(BlockDriverState *bs,
2481 const char *backing_file, const char *backing_fmt)
2482 {
2483 BlockDriver *drv = bs->drv;
2484 int ret;
2485
2486 /* Backing file format doesn't make sense without a backing file */
2487 if (backing_fmt && !backing_file) {
2488 return -EINVAL;
2489 }
2490
2491 if (drv->bdrv_change_backing_file != NULL) {
2492 ret = drv->bdrv_change_backing_file(bs, backing_file, backing_fmt);
2493 } else {
2494 ret = -ENOTSUP;
2495 }
2496
2497 if (ret == 0) {
2498 pstrcpy(bs->backing_file, sizeof(bs->backing_file), backing_file ?: "");
2499 pstrcpy(bs->backing_format, sizeof(bs->backing_format), backing_fmt ?: "");
2500 }
2501 return ret;
2502 }
2503
2504 /*
2505 * Finds the image layer in the chain that has 'bs' as its backing file.
2506 *
2507 * active is the current topmost image.
2508 *
2509 * Returns NULL if bs is not found in active's image chain,
2510 * or if active == bs.
2511 */
2512 BlockDriverState *bdrv_find_overlay(BlockDriverState *active,
2513 BlockDriverState *bs)
2514 {
2515 BlockDriverState *overlay = NULL;
2516 BlockDriverState *intermediate;
2517
2518 assert(active != NULL);
2519 assert(bs != NULL);
2520
2521 /* if bs is the same as active, then by definition it has no overlay
2522 */
2523 if (active == bs) {
2524 return NULL;
2525 }
2526
2527 intermediate = active;
2528 while (intermediate->backing_hd) {
2529 if (intermediate->backing_hd == bs) {
2530 overlay = intermediate;
2531 break;
2532 }
2533 intermediate = intermediate->backing_hd;
2534 }
2535
2536 return overlay;
2537 }
2538
2539 typedef struct BlkIntermediateStates {
2540 BlockDriverState *bs;
2541 QSIMPLEQ_ENTRY(BlkIntermediateStates) entry;
2542 } BlkIntermediateStates;
2543
2544
2545 /*
2546 * Drops images above 'base' up to and including 'top', and sets the image
2547 * above 'top' to have base as its backing file.
2548 *
2549 * Requires that the overlay to 'top' is opened r/w, so that the backing file
2550 * information in 'bs' can be properly updated.
2551 *
2552 * E.g., this will convert the following chain:
2553 * bottom <- base <- intermediate <- top <- active
2554 *
2555 * to
2556 *
2557 * bottom <- base <- active
2558 *
2559 * It is allowed for bottom==base, in which case it converts:
2560 *
2561 * base <- intermediate <- top <- active
2562 *
2563 * to
2564 *
2565 * base <- active
2566 *
2567 * Error conditions:
2568 * if active == top, that is considered an error
2569 *
2570 */
2571 int bdrv_drop_intermediate(BlockDriverState *active, BlockDriverState *top,
2572 BlockDriverState *base)
2573 {
2574 BlockDriverState *intermediate;
2575 BlockDriverState *base_bs = NULL;
2576 BlockDriverState *new_top_bs = NULL;
2577 BlkIntermediateStates *intermediate_state, *next;
2578 int ret = -EIO;
2579
2580 QSIMPLEQ_HEAD(states_to_delete, BlkIntermediateStates) states_to_delete;
2581 QSIMPLEQ_INIT(&states_to_delete);
2582
2583 if (!top->drv || !base->drv) {
2584 goto exit;
2585 }
2586
2587 new_top_bs = bdrv_find_overlay(active, top);
2588
2589 if (new_top_bs == NULL) {
2590 /* we could not find the image above 'top', this is an error */
2591 goto exit;
2592 }
2593
2594 /* special case of new_top_bs->backing_hd already pointing to base - nothing
2595 * to do, no intermediate images */
2596 if (new_top_bs->backing_hd == base) {
2597 ret = 0;
2598 goto exit;
2599 }
2600
2601 intermediate = top;
2602
2603 /* now we will go down through the list, and add each BDS we find
2604 * into our deletion queue, until we hit the 'base'
2605 */
2606 while (intermediate) {
2607 intermediate_state = g_malloc0(sizeof(BlkIntermediateStates));
2608 intermediate_state->bs = intermediate;
2609 QSIMPLEQ_INSERT_TAIL(&states_to_delete, intermediate_state, entry);
2610
2611 if (intermediate->backing_hd == base) {
2612 base_bs = intermediate->backing_hd;
2613 break;
2614 }
2615 intermediate = intermediate->backing_hd;
2616 }
2617 if (base_bs == NULL) {
2618 /* something went wrong, we did not end at the base. safely
2619 * unravel everything, and exit with error */
2620 goto exit;
2621 }
2622
2623 /* success - we can delete the intermediate states, and link top->base */
2624 ret = bdrv_change_backing_file(new_top_bs, base_bs->filename,
2625 base_bs->drv ? base_bs->drv->format_name : "");
2626 if (ret) {
2627 goto exit;
2628 }
2629 bdrv_set_backing_hd(new_top_bs, base_bs);
2630
2631 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2632 /* so that bdrv_close() does not recursively close the chain */
2633 bdrv_set_backing_hd(intermediate_state->bs, NULL);
2634 bdrv_unref(intermediate_state->bs);
2635 }
2636 ret = 0;
2637
2638 exit:
2639 QSIMPLEQ_FOREACH_SAFE(intermediate_state, &states_to_delete, entry, next) {
2640 g_free(intermediate_state);
2641 }
2642 return ret;
2643 }
2644
2645
2646 static int bdrv_check_byte_request(BlockDriverState *bs, int64_t offset,
2647 size_t size)
2648 {
2649 int64_t len;
2650
2651 if (size > INT_MAX) {
2652 return -EIO;
2653 }
2654
2655 if (!bdrv_is_inserted(bs))
2656 return -ENOMEDIUM;
2657
2658 if (bs->growable)
2659 return 0;
2660
2661 len = bdrv_getlength(bs);
2662
2663 if (offset < 0)
2664 return -EIO;
2665
2666 if ((offset > len) || (len - offset < size))
2667 return -EIO;
2668
2669 return 0;
2670 }
2671
2672 static int bdrv_check_request(BlockDriverState *bs, int64_t sector_num,
2673 int nb_sectors)
2674 {
2675 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2676 return -EIO;
2677 }
2678
2679 return bdrv_check_byte_request(bs, sector_num * BDRV_SECTOR_SIZE,
2680 nb_sectors * BDRV_SECTOR_SIZE);
2681 }
2682
2683 typedef struct RwCo {
2684 BlockDriverState *bs;
2685 int64_t offset;
2686 QEMUIOVector *qiov;
2687 bool is_write;
2688 int ret;
2689 BdrvRequestFlags flags;
2690 } RwCo;
2691
2692 static void coroutine_fn bdrv_rw_co_entry(void *opaque)
2693 {
2694 RwCo *rwco = opaque;
2695
2696 if (!rwco->is_write) {
2697 rwco->ret = bdrv_co_do_preadv(rwco->bs, rwco->offset,
2698 rwco->qiov->size, rwco->qiov,
2699 rwco->flags);
2700 } else {
2701 rwco->ret = bdrv_co_do_pwritev(rwco->bs, rwco->offset,
2702 rwco->qiov->size, rwco->qiov,
2703 rwco->flags);
2704 }
2705 }
2706
2707 /*
2708 * Process a vectored synchronous request using coroutines
2709 */
2710 static int bdrv_prwv_co(BlockDriverState *bs, int64_t offset,
2711 QEMUIOVector *qiov, bool is_write,
2712 BdrvRequestFlags flags)
2713 {
2714 Coroutine *co;
2715 RwCo rwco = {
2716 .bs = bs,
2717 .offset = offset,
2718 .qiov = qiov,
2719 .is_write = is_write,
2720 .ret = NOT_DONE,
2721 .flags = flags,
2722 };
2723
2724 /**
2725 * In sync call context, when the vcpu is blocked, this throttling timer
2726 * will not fire; so the I/O throttling function has to be disabled here
2727 * if it has been enabled.
2728 */
2729 if (bs->io_limits_enabled) {
2730 fprintf(stderr, "Disabling I/O throttling on '%s' due "
2731 "to synchronous I/O.\n", bdrv_get_device_name(bs));
2732 bdrv_io_limits_disable(bs);
2733 }
2734
2735 if (qemu_in_coroutine()) {
2736 /* Fast-path if already in coroutine context */
2737 bdrv_rw_co_entry(&rwco);
2738 } else {
2739 AioContext *aio_context = bdrv_get_aio_context(bs);
2740
2741 co = qemu_coroutine_create(bdrv_rw_co_entry);
2742 qemu_coroutine_enter(co, &rwco);
2743 while (rwco.ret == NOT_DONE) {
2744 aio_poll(aio_context, true);
2745 }
2746 }
2747 return rwco.ret;
2748 }
2749
2750 /*
2751 * Process a synchronous request using coroutines
2752 */
2753 static int bdrv_rw_co(BlockDriverState *bs, int64_t sector_num, uint8_t *buf,
2754 int nb_sectors, bool is_write, BdrvRequestFlags flags)
2755 {
2756 QEMUIOVector qiov;
2757 struct iovec iov = {
2758 .iov_base = (void *)buf,
2759 .iov_len = nb_sectors * BDRV_SECTOR_SIZE,
2760 };
2761
2762 if (nb_sectors < 0 || nb_sectors > INT_MAX / BDRV_SECTOR_SIZE) {
2763 return -EINVAL;
2764 }
2765
2766 qemu_iovec_init_external(&qiov, &iov, 1);
2767 return bdrv_prwv_co(bs, sector_num << BDRV_SECTOR_BITS,
2768 &qiov, is_write, flags);
2769 }
2770
2771 /* return < 0 if error. See bdrv_write() for the return codes */
2772 int bdrv_read(BlockDriverState *bs, int64_t sector_num,
2773 uint8_t *buf, int nb_sectors)
2774 {
2775 return bdrv_rw_co(bs, sector_num, buf, nb_sectors, false, 0);
2776 }
2777
2778 /* Just like bdrv_read(), but with I/O throttling temporarily disabled */
2779 int bdrv_read_unthrottled(BlockDriverState *bs, int64_t sector_num,
2780 uint8_t *buf, int nb_sectors)
2781 {
2782 bool enabled;
2783 int ret;
2784
2785 enabled = bs->io_limits_enabled;
2786 bs->io_limits_enabled = false;
2787 ret = bdrv_read(bs, sector_num, buf, nb_sectors);
2788 bs->io_limits_enabled = enabled;
2789 return ret;
2790 }
2791
2792 /* Return < 0 if error. Important errors are:
2793 -EIO generic I/O error (may happen for all errors)
2794 -ENOMEDIUM No media inserted.
2795 -EINVAL Invalid sector number or nb_sectors
2796 -EACCES Trying to write a read-only device
2797 */
2798 int bdrv_write(BlockDriverState *bs, int64_t sector_num,
2799 const uint8_t *buf, int nb_sectors)
2800 {
2801 return bdrv_rw_co(bs, sector_num, (uint8_t *)buf, nb_sectors, true, 0);
2802 }
2803
2804 int bdrv_write_zeroes(BlockDriverState *bs, int64_t sector_num,
2805 int nb_sectors, BdrvRequestFlags flags)
2806 {
2807 return bdrv_rw_co(bs, sector_num, NULL, nb_sectors, true,
2808 BDRV_REQ_ZERO_WRITE | flags);
2809 }
2810
2811 /*
2812 * Completely zero out a block device with the help of bdrv_write_zeroes.
2813 * The operation is sped up by checking the block status and only writing
2814 * zeroes to the device if they currently do not return zeroes. Optional
2815 * flags are passed through to bdrv_write_zeroes (e.g. BDRV_REQ_MAY_UNMAP).
2816 *
2817 * Returns < 0 on error, 0 on success. For error codes see bdrv_write().
2818 */
2819 int bdrv_make_zero(BlockDriverState *bs, BdrvRequestFlags flags)
2820 {
2821 int64_t target_size;
2822 int64_t ret, nb_sectors, sector_num = 0;
2823 int n;
2824
2825 target_size = bdrv_getlength(bs);
2826 if (target_size < 0) {
2827 return target_size;
2828 }
2829 target_size /= BDRV_SECTOR_SIZE;
2830
2831 for (;;) {
2832 nb_sectors = target_size - sector_num;
2833 if (nb_sectors <= 0) {
2834 return 0;
2835 }
2836 if (nb_sectors > INT_MAX) {
2837 nb_sectors = INT_MAX;
2838 }
2839 ret = bdrv_get_block_status(bs, sector_num, nb_sectors, &n);
2840 if (ret < 0) {
2841 error_report("error getting block status at sector %" PRId64 ": %s",
2842 sector_num, strerror(-ret));
2843 return ret;
2844 }
2845 if (ret & BDRV_BLOCK_ZERO) {
2846 sector_num += n;
2847 continue;
2848 }
2849 ret = bdrv_write_zeroes(bs, sector_num, n, flags);
2850 if (ret < 0) {
2851 error_report("error writing zeroes at sector %" PRId64 ": %s",
2852 sector_num, strerror(-ret));
2853 return ret;
2854 }
2855 sector_num += n;
2856 }
2857 }
2858
2859 int bdrv_pread(BlockDriverState *bs, int64_t offset, void *buf, int bytes)
2860 {
2861 QEMUIOVector qiov;
2862 struct iovec iov = {
2863 .iov_base = (void *)buf,
2864 .iov_len = bytes,
2865 };
2866 int ret;
2867
2868 if (bytes < 0) {
2869 return -EINVAL;
2870 }
2871
2872 qemu_iovec_init_external(&qiov, &iov, 1);
2873 ret = bdrv_prwv_co(bs, offset, &qiov, false, 0);
2874 if (ret < 0) {
2875 return ret;
2876 }
2877
2878 return bytes;
2879 }
2880
2881 int bdrv_pwritev(BlockDriverState *bs, int64_t offset, QEMUIOVector *qiov)
2882 {
2883 int ret;
2884
2885 ret = bdrv_prwv_co(bs, offset, qiov, true, 0);
2886 if (ret < 0) {
2887 return ret;
2888 }
2889
2890 return qiov->size;
2891 }
2892
2893 int bdrv_pwrite(BlockDriverState *bs, int64_t offset,
2894 const void *buf, int bytes)
2895 {
2896 QEMUIOVector qiov;
2897 struct iovec iov = {
2898 .iov_base = (void *) buf,
2899 .iov_len = bytes,
2900 };
2901
2902 if (bytes < 0) {
2903 return -EINVAL;
2904 }
2905
2906 qemu_iovec_init_external(&qiov, &iov, 1);
2907 return bdrv_pwritev(bs, offset, &qiov);
2908 }
2909
2910 /*
2911 * Writes to the file and ensures that no writes are reordered across this
2912 * request (acts as a barrier)
2913 *
2914 * Returns 0 on success, -errno in error cases.
2915 */
2916 int bdrv_pwrite_sync(BlockDriverState *bs, int64_t offset,
2917 const void *buf, int count)
2918 {
2919 int ret;
2920
2921 ret = bdrv_pwrite(bs, offset, buf, count);
2922 if (ret < 0) {
2923 return ret;
2924 }
2925
2926 /* No flush needed for cache modes that already do it */
2927 if (bs->enable_write_cache) {
2928 bdrv_flush(bs);
2929 }
2930
2931 return 0;
2932 }
2933
2934 static int coroutine_fn bdrv_co_do_copy_on_readv(BlockDriverState *bs,
2935 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
2936 {
2937 /* Perform I/O through a temporary buffer so that users who scribble over
2938 * their read buffer while the operation is in progress do not end up
2939 * modifying the image file. This is critical for zero-copy guest I/O
2940 * where anything might happen inside guest memory.
2941 */
2942 void *bounce_buffer;
2943
2944 BlockDriver *drv = bs->drv;
2945 struct iovec iov;
2946 QEMUIOVector bounce_qiov;
2947 int64_t cluster_sector_num;
2948 int cluster_nb_sectors;
2949 size_t skip_bytes;
2950 int ret;
2951
2952 /* Cover entire cluster so no additional backing file I/O is required when
2953 * allocating cluster in the image file.
2954 */
2955 bdrv_round_to_clusters(bs, sector_num, nb_sectors,
2956 &cluster_sector_num, &cluster_nb_sectors);
2957
2958 trace_bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors,
2959 cluster_sector_num, cluster_nb_sectors);
2960
2961 iov.iov_len = cluster_nb_sectors * BDRV_SECTOR_SIZE;
2962 iov.iov_base = bounce_buffer = qemu_blockalign(bs, iov.iov_len);
2963 qemu_iovec_init_external(&bounce_qiov, &iov, 1);
2964
2965 ret = drv->bdrv_co_readv(bs, cluster_sector_num, cluster_nb_sectors,
2966 &bounce_qiov);
2967 if (ret < 0) {
2968 goto err;
2969 }
2970
2971 if (drv->bdrv_co_write_zeroes &&
2972 buffer_is_zero(bounce_buffer, iov.iov_len)) {
2973 ret = bdrv_co_do_write_zeroes(bs, cluster_sector_num,
2974 cluster_nb_sectors, 0);
2975 } else {
2976 /* This does not change the data on the disk, it is not necessary
2977 * to flush even in cache=writethrough mode.
2978 */
2979 ret = drv->bdrv_co_writev(bs, cluster_sector_num, cluster_nb_sectors,
2980 &bounce_qiov);
2981 }
2982
2983 if (ret < 0) {
2984 /* It might be okay to ignore write errors for guest requests. If this
2985 * is a deliberate copy-on-read then we don't want to ignore the error.
2986 * Simply report it in all cases.
2987 */
2988 goto err;
2989 }
2990
2991 skip_bytes = (sector_num - cluster_sector_num) * BDRV_SECTOR_SIZE;
2992 qemu_iovec_from_buf(qiov, 0, bounce_buffer + skip_bytes,
2993 nb_sectors * BDRV_SECTOR_SIZE);
2994
2995 err:
2996 qemu_vfree(bounce_buffer);
2997 return ret;
2998 }
2999
3000 /*
3001 * Forwards an already correctly aligned request to the BlockDriver. This
3002 * handles copy on read and zeroing after EOF; any other features must be
3003 * implemented by the caller.
3004 */
3005 static int coroutine_fn bdrv_aligned_preadv(BlockDriverState *bs,
3006 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3007 int64_t align, QEMUIOVector *qiov, int flags)
3008 {
3009 BlockDriver *drv = bs->drv;
3010 int ret;
3011
3012 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3013 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3014
3015 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3016 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3017
3018 /* Handle Copy on Read and associated serialisation */
3019 if (flags & BDRV_REQ_COPY_ON_READ) {
3020 /* If we touch the same cluster it counts as an overlap. This
3021 * guarantees that allocating writes will be serialized and not race
3022 * with each other for the same cluster. For example, in copy-on-read
3023 * it ensures that the CoR read and write operations are atomic and
3024 * guest writes cannot interleave between them. */
3025 mark_request_serialising(req, bdrv_get_cluster_size(bs));
3026 }
3027
3028 wait_serialising_requests(req);
3029
3030 if (flags & BDRV_REQ_COPY_ON_READ) {
3031 int pnum;
3032
3033 ret = bdrv_is_allocated(bs, sector_num, nb_sectors, &pnum);
3034 if (ret < 0) {
3035 goto out;
3036 }
3037
3038 if (!ret || pnum != nb_sectors) {
3039 ret = bdrv_co_do_copy_on_readv(bs, sector_num, nb_sectors, qiov);
3040 goto out;
3041 }
3042 }
3043
3044 /* Forward the request to the BlockDriver */
3045 if (!(bs->zero_beyond_eof && bs->growable)) {
3046 ret = drv->bdrv_co_readv(bs, sector_num, nb_sectors, qiov);
3047 } else {
3048 /* Read zeros after EOF of growable BDSes */
3049 int64_t len, total_sectors, max_nb_sectors;
3050
3051 len = bdrv_getlength(bs);
3052 if (len < 0) {
3053 ret = len;
3054 goto out;
3055 }
3056
3057 total_sectors = DIV_ROUND_UP(len, BDRV_SECTOR_SIZE);
3058 max_nb_sectors = ROUND_UP(MAX(0, total_sectors - sector_num),
3059 align >> BDRV_SECTOR_BITS);
3060 if (max_nb_sectors > 0) {
3061 ret = drv->bdrv_co_readv(bs, sector_num,
3062 MIN(nb_sectors, max_nb_sectors), qiov);
3063 } else {
3064 ret = 0;
3065 }
3066
3067 /* Reading beyond end of file is supposed to produce zeroes */
3068 if (ret == 0 && total_sectors < sector_num + nb_sectors) {
3069 uint64_t offset = MAX(0, total_sectors - sector_num);
3070 uint64_t bytes = (sector_num + nb_sectors - offset) *
3071 BDRV_SECTOR_SIZE;
3072 qemu_iovec_memset(qiov, offset * BDRV_SECTOR_SIZE, 0, bytes);
3073 }
3074 }
3075
3076 out:
3077 return ret;
3078 }
3079
3080 /*
3081 * Handle a read request in coroutine context
3082 */
3083 static int coroutine_fn bdrv_co_do_preadv(BlockDriverState *bs,
3084 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3085 BdrvRequestFlags flags)
3086 {
3087 BlockDriver *drv = bs->drv;
3088 BdrvTrackedRequest req;
3089
3090 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3091 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3092 uint8_t *head_buf = NULL;
3093 uint8_t *tail_buf = NULL;
3094 QEMUIOVector local_qiov;
3095 bool use_local_qiov = false;
3096 int ret;
3097
3098 if (!drv) {
3099 return -ENOMEDIUM;
3100 }
3101 if (bdrv_check_byte_request(bs, offset, bytes)) {
3102 return -EIO;
3103 }
3104
3105 if (bs->copy_on_read) {
3106 flags |= BDRV_REQ_COPY_ON_READ;
3107 }
3108
3109 /* throttling disk I/O */
3110 if (bs->io_limits_enabled) {
3111 bdrv_io_limits_intercept(bs, bytes, false);
3112 }
3113
3114 /* Align read if necessary by padding qiov */
3115 if (offset & (align - 1)) {
3116 head_buf = qemu_blockalign(bs, align);
3117 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3118 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3119 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3120 use_local_qiov = true;
3121
3122 bytes += offset & (align - 1);
3123 offset = offset & ~(align - 1);
3124 }
3125
3126 if ((offset + bytes) & (align - 1)) {
3127 if (!use_local_qiov) {
3128 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3129 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3130 use_local_qiov = true;
3131 }
3132 tail_buf = qemu_blockalign(bs, align);
3133 qemu_iovec_add(&local_qiov, tail_buf,
3134 align - ((offset + bytes) & (align - 1)));
3135
3136 bytes = ROUND_UP(bytes, align);
3137 }
3138
3139 tracked_request_begin(&req, bs, offset, bytes, false);
3140 ret = bdrv_aligned_preadv(bs, &req, offset, bytes, align,
3141 use_local_qiov ? &local_qiov : qiov,
3142 flags);
3143 tracked_request_end(&req);
3144
3145 if (use_local_qiov) {
3146 qemu_iovec_destroy(&local_qiov);
3147 qemu_vfree(head_buf);
3148 qemu_vfree(tail_buf);
3149 }
3150
3151 return ret;
3152 }
3153
3154 static int coroutine_fn bdrv_co_do_readv(BlockDriverState *bs,
3155 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3156 BdrvRequestFlags flags)
3157 {
3158 if (nb_sectors < 0 || nb_sectors > (UINT_MAX >> BDRV_SECTOR_BITS)) {
3159 return -EINVAL;
3160 }
3161
3162 return bdrv_co_do_preadv(bs, sector_num << BDRV_SECTOR_BITS,
3163 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3164 }
3165
3166 int coroutine_fn bdrv_co_readv(BlockDriverState *bs, int64_t sector_num,
3167 int nb_sectors, QEMUIOVector *qiov)
3168 {
3169 trace_bdrv_co_readv(bs, sector_num, nb_sectors);
3170
3171 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov, 0);
3172 }
3173
3174 int coroutine_fn bdrv_co_copy_on_readv(BlockDriverState *bs,
3175 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov)
3176 {
3177 trace_bdrv_co_copy_on_readv(bs, sector_num, nb_sectors);
3178
3179 return bdrv_co_do_readv(bs, sector_num, nb_sectors, qiov,
3180 BDRV_REQ_COPY_ON_READ);
3181 }
3182
3183 /* if no limit is specified in the BlockLimits use a default
3184 * of 32768 512-byte sectors (16 MiB) per request.
3185 */
3186 #define MAX_WRITE_ZEROES_DEFAULT 32768
3187
3188 static int coroutine_fn bdrv_co_do_write_zeroes(BlockDriverState *bs,
3189 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags)
3190 {
3191 BlockDriver *drv = bs->drv;
3192 QEMUIOVector qiov;
3193 struct iovec iov = {0};
3194 int ret = 0;
3195
3196 int max_write_zeroes = bs->bl.max_write_zeroes ?
3197 bs->bl.max_write_zeroes : MAX_WRITE_ZEROES_DEFAULT;
3198
3199 while (nb_sectors > 0 && !ret) {
3200 int num = nb_sectors;
3201
3202 /* Align request. Block drivers can expect the "bulk" of the request
3203 * to be aligned.
3204 */
3205 if (bs->bl.write_zeroes_alignment
3206 && num > bs->bl.write_zeroes_alignment) {
3207 if (sector_num % bs->bl.write_zeroes_alignment != 0) {
3208 /* Make a small request up to the first aligned sector. */
3209 num = bs->bl.write_zeroes_alignment;
3210 num -= sector_num % bs->bl.write_zeroes_alignment;
3211 } else if ((sector_num + num) % bs->bl.write_zeroes_alignment != 0) {
3212 /* Shorten the request to the last aligned sector. num cannot
3213 * underflow because num > bs->bl.write_zeroes_alignment.
3214 */
3215 num -= (sector_num + num) % bs->bl.write_zeroes_alignment;
3216 }
3217 }
3218
3219 /* limit request size */
3220 if (num > max_write_zeroes) {
3221 num = max_write_zeroes;
3222 }
3223
3224 ret = -ENOTSUP;
3225 /* First try the efficient write zeroes operation */
3226 if (drv->bdrv_co_write_zeroes) {
3227 ret = drv->bdrv_co_write_zeroes(bs, sector_num, num, flags);
3228 }
3229
3230 if (ret == -ENOTSUP) {
3231 /* Fall back to bounce buffer if write zeroes is unsupported */
3232 iov.iov_len = num * BDRV_SECTOR_SIZE;
3233 if (iov.iov_base == NULL) {
3234 iov.iov_base = qemu_blockalign(bs, num * BDRV_SECTOR_SIZE);
3235 memset(iov.iov_base, 0, num * BDRV_SECTOR_SIZE);
3236 }
3237 qemu_iovec_init_external(&qiov, &iov, 1);
3238
3239 ret = drv->bdrv_co_writev(bs, sector_num, num, &qiov);
3240
3241 /* Keep bounce buffer around if it is big enough for all
3242 * all future requests.
3243 */
3244 if (num < max_write_zeroes) {
3245 qemu_vfree(iov.iov_base);
3246 iov.iov_base = NULL;
3247 }
3248 }
3249
3250 sector_num += num;
3251 nb_sectors -= num;
3252 }
3253
3254 qemu_vfree(iov.iov_base);
3255 return ret;
3256 }
3257
3258 /*
3259 * Forwards an already correctly aligned write request to the BlockDriver.
3260 */
3261 static int coroutine_fn bdrv_aligned_pwritev(BlockDriverState *bs,
3262 BdrvTrackedRequest *req, int64_t offset, unsigned int bytes,
3263 QEMUIOVector *qiov, int flags)
3264 {
3265 BlockDriver *drv = bs->drv;
3266 bool waited;
3267 int ret;
3268
3269 int64_t sector_num = offset >> BDRV_SECTOR_BITS;
3270 unsigned int nb_sectors = bytes >> BDRV_SECTOR_BITS;
3271
3272 assert((offset & (BDRV_SECTOR_SIZE - 1)) == 0);
3273 assert((bytes & (BDRV_SECTOR_SIZE - 1)) == 0);
3274
3275 waited = wait_serialising_requests(req);
3276 assert(!waited || !req->serialising);
3277 assert(req->overlap_offset <= offset);
3278 assert(offset + bytes <= req->overlap_offset + req->overlap_bytes);
3279
3280 ret = notifier_with_return_list_notify(&bs->before_write_notifiers, req);
3281
3282 if (!ret && bs->detect_zeroes != BLOCKDEV_DETECT_ZEROES_OPTIONS_OFF &&
3283 !(flags & BDRV_REQ_ZERO_WRITE) && drv->bdrv_co_write_zeroes &&
3284 qemu_iovec_is_zero(qiov)) {
3285 flags |= BDRV_REQ_ZERO_WRITE;
3286 if (bs->detect_zeroes == BLOCKDEV_DETECT_ZEROES_OPTIONS_UNMAP) {
3287 flags |= BDRV_REQ_MAY_UNMAP;
3288 }
3289 }
3290
3291 if (ret < 0) {
3292 /* Do nothing, write notifier decided to fail this request */
3293 } else if (flags & BDRV_REQ_ZERO_WRITE) {
3294 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_ZERO);
3295 ret = bdrv_co_do_write_zeroes(bs, sector_num, nb_sectors, flags);
3296 } else {
3297 BLKDBG_EVENT(bs, BLKDBG_PWRITEV);
3298 ret = drv->bdrv_co_writev(bs, sector_num, nb_sectors, qiov);
3299 }
3300 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_DONE);
3301
3302 if (ret == 0 && !bs->enable_write_cache) {
3303 ret = bdrv_co_flush(bs);
3304 }
3305
3306 bdrv_set_dirty(bs, sector_num, nb_sectors);
3307
3308 if (bs->wr_highest_sector < sector_num + nb_sectors - 1) {
3309 bs->wr_highest_sector = sector_num + nb_sectors - 1;
3310 }
3311 if (bs->growable && ret >= 0) {
3312 bs->total_sectors = MAX(bs->total_sectors, sector_num + nb_sectors);
3313 }
3314
3315 return ret;
3316 }
3317
3318 /*
3319 * Handle a write request in coroutine context
3320 */
3321 static int coroutine_fn bdrv_co_do_pwritev(BlockDriverState *bs,
3322 int64_t offset, unsigned int bytes, QEMUIOVector *qiov,
3323 BdrvRequestFlags flags)
3324 {
3325 BdrvTrackedRequest req;
3326 /* TODO Lift BDRV_SECTOR_SIZE restriction in BlockDriver interface */
3327 uint64_t align = MAX(BDRV_SECTOR_SIZE, bs->request_alignment);
3328 uint8_t *head_buf = NULL;
3329 uint8_t *tail_buf = NULL;
3330 QEMUIOVector local_qiov;
3331 bool use_local_qiov = false;
3332 int ret;
3333
3334 if (!bs->drv) {
3335 return -ENOMEDIUM;
3336 }
3337 if (bs->read_only) {
3338 return -EACCES;
3339 }
3340 if (bdrv_check_byte_request(bs, offset, bytes)) {
3341 return -EIO;
3342 }
3343
3344 /* throttling disk I/O */
3345 if (bs->io_limits_enabled) {
3346 bdrv_io_limits_intercept(bs, bytes, true);
3347 }
3348
3349 /*
3350 * Align write if necessary by performing a read-modify-write cycle.
3351 * Pad qiov with the read parts and be sure to have a tracked request not
3352 * only for bdrv_aligned_pwritev, but also for the reads of the RMW cycle.
3353 */
3354 tracked_request_begin(&req, bs, offset, bytes, true);
3355
3356 if (offset & (align - 1)) {
3357 QEMUIOVector head_qiov;
3358 struct iovec head_iov;
3359
3360 mark_request_serialising(&req, align);
3361 wait_serialising_requests(&req);
3362
3363 head_buf = qemu_blockalign(bs, align);
3364 head_iov = (struct iovec) {
3365 .iov_base = head_buf,
3366 .iov_len = align,
3367 };
3368 qemu_iovec_init_external(&head_qiov, &head_iov, 1);
3369
3370 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_HEAD);
3371 ret = bdrv_aligned_preadv(bs, &req, offset & ~(align - 1), align,
3372 align, &head_qiov, 0);
3373 if (ret < 0) {
3374 goto fail;
3375 }
3376 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_HEAD);
3377
3378 qemu_iovec_init(&local_qiov, qiov->niov + 2);
3379 qemu_iovec_add(&local_qiov, head_buf, offset & (align - 1));
3380 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3381 use_local_qiov = true;
3382
3383 bytes += offset & (align - 1);
3384 offset = offset & ~(align - 1);
3385 }
3386
3387 if ((offset + bytes) & (align - 1)) {
3388 QEMUIOVector tail_qiov;
3389 struct iovec tail_iov;
3390 size_t tail_bytes;
3391 bool waited;
3392
3393 mark_request_serialising(&req, align);
3394 waited = wait_serialising_requests(&req);
3395 assert(!waited || !use_local_qiov);
3396
3397 tail_buf = qemu_blockalign(bs, align);
3398 tail_iov = (struct iovec) {
3399 .iov_base = tail_buf,
3400 .iov_len = align,
3401 };
3402 qemu_iovec_init_external(&tail_qiov, &tail_iov, 1);
3403
3404 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_TAIL);
3405 ret = bdrv_aligned_preadv(bs, &req, (offset + bytes) & ~(align - 1), align,
3406 align, &tail_qiov, 0);
3407 if (ret < 0) {
3408 goto fail;
3409 }
3410 BLKDBG_EVENT(bs, BLKDBG_PWRITEV_RMW_AFTER_TAIL);
3411
3412 if (!use_local_qiov) {
3413 qemu_iovec_init(&local_qiov, qiov->niov + 1);
3414 qemu_iovec_concat(&local_qiov, qiov, 0, qiov->size);
3415 use_local_qiov = true;
3416 }
3417
3418 tail_bytes = (offset + bytes) & (align - 1);
3419 qemu_iovec_add(&local_qiov, tail_buf + tail_bytes, align - tail_bytes);
3420
3421 bytes = ROUND_UP(bytes, align);
3422 }
3423
3424 ret = bdrv_aligned_pwritev(bs, &req, offset, bytes,
3425 use_local_qiov ? &local_qiov : qiov,
3426 flags);
3427
3428 fail:
3429 tracked_request_end(&req);
3430
3431 if (use_local_qiov) {
3432 qemu_iovec_destroy(&local_qiov);
3433 }
3434 qemu_vfree(head_buf);
3435 qemu_vfree(tail_buf);
3436
3437 return ret;
3438 }
3439
3440 static int coroutine_fn bdrv_co_do_writev(BlockDriverState *bs,
3441 int64_t sector_num, int nb_sectors, QEMUIOVector *qiov,
3442 BdrvRequestFlags flags)
3443 {
3444 if (nb_sectors < 0 || nb_sectors > (INT_MAX >> BDRV_SECTOR_BITS)) {
3445 return -EINVAL;
3446 }
3447
3448 return bdrv_co_do_pwritev(bs, sector_num << BDRV_SECTOR_BITS,
3449 nb_sectors << BDRV_SECTOR_BITS, qiov, flags);
3450 }
3451
3452 int coroutine_fn bdrv_co_writev(BlockDriverState *bs, int64_t sector_num,
3453 int nb_sectors, QEMUIOVector *qiov)
3454 {
3455 trace_bdrv_co_writev(bs, sector_num, nb_sectors);
3456
3457 return bdrv_co_do_writev(bs, sector_num, nb_sectors, qiov, 0);
3458 }
3459
3460 int coroutine_fn bdrv_co_write_zeroes(BlockDriverState *bs,
3461 int64_t sector_num, int nb_sectors,
3462 BdrvRequestFlags flags)
3463 {
3464 trace_bdrv_co_write_zeroes(bs, sector_num, nb_sectors, flags);
3465
3466 if (!(bs->open_flags & BDRV_O_UNMAP)) {
3467 flags &= ~BDRV_REQ_MAY_UNMAP;
3468 }
3469
3470 return bdrv_co_do_writev(bs, sector_num, nb_sectors, NULL,
3471 BDRV_REQ_ZERO_WRITE | flags);
3472 }
3473
3474 /**
3475 * Truncate file to 'offset' bytes (needed only for file protocols)
3476 */
3477 int bdrv_truncate(BlockDriverState *bs, int64_t offset)
3478 {
3479 BlockDriver *drv = bs->drv;
3480 int ret;
3481 if (!drv)
3482 return -ENOMEDIUM;
3483 if (!drv->bdrv_truncate)
3484 return -ENOTSUP;
3485 if (bs->read_only)
3486 return -EACCES;
3487
3488 ret = drv->bdrv_truncate(bs, offset);
3489 if (ret == 0) {
3490 ret = refresh_total_sectors(bs, offset >> BDRV_SECTOR_BITS);
3491 bdrv_dev_resize_cb(bs);
3492 }
3493 return ret;
3494 }
3495
3496 /**
3497 * Length of a allocated file in bytes. Sparse files are counted by actual
3498 * allocated space. Return < 0 if error or unknown.
3499 */
3500 int64_t bdrv_get_allocated_file_size(BlockDriverState *bs)
3501 {
3502 BlockDriver *drv = bs->drv;
3503 if (!drv) {
3504 return -ENOMEDIUM;
3505 }
3506 if (drv->bdrv_get_allocated_file_size) {
3507 return drv->bdrv_get_allocated_file_size(bs);
3508 }
3509 if (bs->file) {
3510 return bdrv_get_allocated_file_size(bs->file);
3511 }
3512 return -ENOTSUP;
3513 }
3514
3515 /**
3516 * Length of a file in bytes. Return < 0 if error or unknown.
3517 */
3518 int64_t bdrv_getlength(BlockDriverState *bs)
3519 {
3520 BlockDriver *drv = bs->drv;
3521 if (!drv)
3522 return -ENOMEDIUM;
3523
3524 if (drv->has_variable_length) {
3525 int ret = refresh_total_sectors(bs, bs->total_sectors);
3526 if (ret < 0) {
3527 return ret;
3528 }
3529 }
3530 return bs->total_sectors * BDRV_SECTOR_SIZE;
3531 }
3532
3533 /* return 0 as number of sectors if no device present or error */
3534 void bdrv_get_geometry(BlockDriverState *bs, uint64_t *nb_sectors_ptr)
3535 {
3536 int64_t length;
3537 length = bdrv_getlength(bs);
3538 if (length < 0)
3539 length = 0;
3540 else
3541 length = length >> BDRV_SECTOR_BITS;
3542 *nb_sectors_ptr = length;
3543 }
3544
3545 void bdrv_set_on_error(BlockDriverState *bs, BlockdevOnError on_read_error,
3546 BlockdevOnError on_write_error)
3547 {
3548 bs->on_read_error = on_read_error;
3549 bs->on_write_error = on_write_error;
3550 }
3551
3552 BlockdevOnError bdrv_get_on_error(BlockDriverState *bs, bool is_read)
3553 {
3554 return is_read ? bs->on_read_error : bs->on_write_error;
3555 }
3556
3557 BlockErrorAction bdrv_get_error_action(BlockDriverState *bs, bool is_read, int error)
3558 {
3559 BlockdevOnError on_err = is_read ? bs->on_read_error : bs->on_write_error;
3560
3561 switch (on_err) {
3562 case BLOCKDEV_ON_ERROR_ENOSPC:
3563 return (error == ENOSPC) ?
3564 BLOCK_ERROR_ACTION_STOP : BLOCK_ERROR_ACTION_REPORT;
3565 case BLOCKDEV_ON_ERROR_STOP:
3566 return BLOCK_ERROR_ACTION_STOP;
3567 case BLOCKDEV_ON_ERROR_REPORT:
3568 return BLOCK_ERROR_ACTION_REPORT;
3569 case BLOCKDEV_ON_ERROR_IGNORE:
3570 return BLOCK_ERROR_ACTION_IGNORE;
3571 default:
3572 abort();
3573 }
3574 }
3575
3576 /* This is done by device models because, while the block layer knows
3577 * about the error, it does not know whether an operation comes from
3578 * the device or the block layer (from a job, for example).
3579 */
3580 void bdrv_error_action(BlockDriverState *bs, BlockErrorAction action,
3581 bool is_read, int error)
3582 {
3583 assert(error >= 0);
3584
3585 if (action == BLOCK_ERROR_ACTION_STOP) {
3586 /* First set the iostatus, so that "info block" returns an iostatus
3587 * that matches the events raised so far (an additional error iostatus
3588 * is fine, but not a lost one).
3589 */
3590 bdrv_iostatus_set_err(bs, error);
3591
3592 /* Then raise the request to stop the VM and the event.
3593 * qemu_system_vmstop_request_prepare has two effects. First,
3594 * it ensures that the STOP event always comes after the
3595 * BLOCK_IO_ERROR event. Second, it ensures that even if management
3596 * can observe the STOP event and do a "cont" before the STOP
3597 * event is issued, the VM will not stop. In this case, vm_start()
3598 * also ensures that the STOP/RESUME pair of events is emitted.
3599 */
3600 qemu_system_vmstop_request_prepare();
3601 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3602 is_read ? IO_OPERATION_TYPE_READ :
3603 IO_OPERATION_TYPE_WRITE,
3604 action, &error_abort);
3605 qemu_system_vmstop_request(RUN_STATE_IO_ERROR);
3606 } else {
3607 qapi_event_send_block_io_error(bdrv_get_device_name(bs),
3608 is_read ? IO_OPERATION_TYPE_READ :
3609 IO_OPERATION_TYPE_WRITE,
3610 action, &error_abort);
3611 }
3612 }
3613
3614 int bdrv_is_read_only(BlockDriverState *bs)
3615 {
3616 return bs->read_only;
3617 }
3618
3619 int bdrv_is_sg(BlockDriverState *bs)
3620 {
3621 return bs->sg;
3622 }
3623
3624 int bdrv_enable_write_cache(BlockDriverState *bs)
3625 {
3626 return bs->enable_write_cache;
3627 }
3628
3629 void bdrv_set_enable_write_cache(BlockDriverState *bs, bool wce)
3630 {
3631 bs->enable_write_cache = wce;
3632
3633 /* so a reopen() will preserve wce */
3634 if (wce) {
3635 bs->open_flags |= BDRV_O_CACHE_WB;
3636 } else {
3637 bs->open_flags &= ~BDRV_O_CACHE_WB;
3638 }
3639 }
3640
3641 int bdrv_is_encrypted(BlockDriverState *bs)
3642 {
3643 if (bs->backing_hd && bs->backing_hd->encrypted)
3644 return 1;
3645 return bs->encrypted;
3646 }
3647
3648 int bdrv_key_required(BlockDriverState *bs)
3649 {
3650 BlockDriverState *backing_hd = bs->backing_hd;
3651
3652 if (backing_hd && backing_hd->encrypted && !backing_hd->valid_key)
3653 return 1;
3654 return (bs->encrypted && !bs->valid_key);
3655 }
3656
3657 int bdrv_set_key(BlockDriverState *bs, const char *key)
3658 {
3659 int ret;
3660 if (bs->backing_hd && bs->backing_hd->encrypted) {
3661 ret = bdrv_set_key(bs->backing_hd, key);
3662 if (ret < 0)
3663 return ret;
3664 if (!bs->encrypted)
3665 return 0;
3666 }
3667 if (!bs->encrypted) {
3668 return -EINVAL;
3669 } else if (!bs->drv || !bs->drv->bdrv_set_key) {
3670 return -ENOMEDIUM;
3671 }
3672 ret = bs->drv->bdrv_set_key(bs, key);
3673 if (ret < 0) {
3674 bs->valid_key = 0;
3675 } else if (!bs->valid_key) {
3676 bs->valid_key = 1;
3677 /* call the change callback now, we skipped it on open */
3678 bdrv_dev_change_media_cb(bs, true);
3679 }
3680 return ret;
3681 }
3682
3683 const char *bdrv_get_format_name(BlockDriverState *bs)
3684 {
3685 return bs->drv ? bs->drv->format_name : NULL;
3686 }
3687
3688 void bdrv_iterate_format(void (*it)(void *opaque, const char *name),
3689 void *opaque)
3690 {
3691 BlockDriver *drv;
3692 int count = 0;
3693 const char **formats = NULL;
3694
3695 QLIST_FOREACH(drv, &bdrv_drivers, list) {
3696 if (drv->format_name) {
3697 bool found = false;
3698 int i = count;
3699 while (formats && i && !found) {
3700 found = !strcmp(formats[--i], drv->format_name);
3701 }
3702
3703 if (!found) {
3704 formats = g_realloc(formats, (count + 1) * sizeof(char *));
3705 formats[count++] = drv->format_name;
3706 it(opaque, drv->format_name);
3707 }
3708 }
3709 }
3710 g_free(formats);
3711 }
3712
3713 /* This function is to find block backend bs */
3714 BlockDriverState *bdrv_find(const char *name)
3715 {
3716 BlockDriverState *bs;
3717
3718 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3719 if (!strcmp(name, bs->device_name)) {
3720 return bs;
3721 }
3722 }
3723 return NULL;
3724 }
3725
3726 /* This function is to find a node in the bs graph */
3727 BlockDriverState *bdrv_find_node(const char *node_name)
3728 {
3729 BlockDriverState *bs;
3730
3731 assert(node_name);
3732
3733 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3734 if (!strcmp(node_name, bs->node_name)) {
3735 return bs;
3736 }
3737 }
3738 return NULL;
3739 }
3740
3741 /* Put this QMP function here so it can access the static graph_bdrv_states. */
3742 BlockDeviceInfoList *bdrv_named_nodes_list(void)
3743 {
3744 BlockDeviceInfoList *list, *entry;
3745 BlockDriverState *bs;
3746
3747 list = NULL;
3748 QTAILQ_FOREACH(bs, &graph_bdrv_states, node_list) {
3749 entry = g_malloc0(sizeof(*entry));
3750 entry->value = bdrv_block_device_info(bs);
3751 entry->next = list;
3752 list = entry;
3753 }
3754
3755 return list;
3756 }
3757
3758 BlockDriverState *bdrv_lookup_bs(const char *device,
3759 const char *node_name,
3760 Error **errp)
3761 {
3762 BlockDriverState *bs = NULL;
3763
3764 if (device) {
3765 bs = bdrv_find(device);
3766
3767 if (bs) {
3768 return bs;
3769 }
3770 }
3771
3772 if (node_name) {
3773 bs = bdrv_find_node(node_name);
3774
3775 if (bs) {
3776 return bs;
3777 }
3778 }
3779
3780 error_setg(errp, "Cannot find device=%s nor node_name=%s",
3781 device ? device : "",
3782 node_name ? node_name : "");
3783 return NULL;
3784 }
3785
3786 BlockDriverState *bdrv_next(BlockDriverState *bs)
3787 {
3788 if (!bs) {
3789 return QTAILQ_FIRST(&bdrv_states);
3790 }
3791 return QTAILQ_NEXT(bs, device_list);
3792 }
3793
3794 void bdrv_iterate(void (*it)(void *opaque, BlockDriverState *bs), void *opaque)
3795 {
3796 BlockDriverState *bs;
3797
3798 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3799 it(opaque, bs);
3800 }
3801 }
3802
3803 const char *bdrv_get_device_name(BlockDriverState *bs)
3804 {
3805 return bs->device_name;
3806 }
3807
3808 int bdrv_get_flags(BlockDriverState *bs)
3809 {
3810 return bs->open_flags;
3811 }
3812
3813 int bdrv_flush_all(void)
3814 {
3815 BlockDriverState *bs;
3816 int result = 0;
3817
3818 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
3819 AioContext *aio_context = bdrv_get_aio_context(bs);
3820 int ret;
3821
3822 aio_context_acquire(aio_context);
3823 ret = bdrv_flush(bs);
3824 if (ret < 0 && !result) {
3825 result = ret;
3826 }
3827 aio_context_release(aio_context);
3828 }
3829
3830 return result;
3831 }
3832
3833 int bdrv_has_zero_init_1(BlockDriverState *bs)
3834 {
3835 return 1;
3836 }
3837
3838 int bdrv_has_zero_init(BlockDriverState *bs)
3839 {
3840 assert(bs->drv);
3841
3842 /* If BS is a copy on write image, it is initialized to
3843 the contents of the base image, which may not be zeroes. */
3844 if (bs->backing_hd) {
3845 return 0;
3846 }
3847 if (bs->drv->bdrv_has_zero_init) {
3848 return bs->drv->bdrv_has_zero_init(bs);
3849 }
3850
3851 /* safe default */
3852 return 0;
3853 }
3854
3855 bool bdrv_unallocated_blocks_are_zero(BlockDriverState *bs)
3856 {
3857 BlockDriverInfo bdi;
3858
3859 if (bs->backing_hd) {
3860 return false;
3861 }
3862
3863 if (bdrv_get_info(bs, &bdi) == 0) {
3864 return bdi.unallocated_blocks_are_zero;
3865 }
3866
3867 return false;
3868 }
3869
3870 bool bdrv_can_write_zeroes_with_unmap(BlockDriverState *bs)
3871 {
3872 BlockDriverInfo bdi;
3873
3874 if (bs->backing_hd || !(bs->open_flags & BDRV_O_UNMAP)) {
3875 return false;
3876 }
3877
3878 if (bdrv_get_info(bs, &bdi) == 0) {
3879 return bdi.can_write_zeroes_with_unmap;
3880 }
3881
3882 return false;
3883 }
3884
3885 typedef struct BdrvCoGetBlockStatusData {
3886 BlockDriverState *bs;
3887 BlockDriverState *base;
3888 int64_t sector_num;
3889 int nb_sectors;
3890 int *pnum;
3891 int64_t ret;
3892 bool done;
3893 } BdrvCoGetBlockStatusData;
3894
3895 /*
3896 * Returns true iff the specified sector is present in the disk image. Drivers
3897 * not implementing the functionality are assumed to not support backing files,
3898 * hence all their sectors are reported as allocated.
3899 *
3900 * If 'sector_num' is beyond the end of the disk image the return value is 0
3901 * and 'pnum' is set to 0.
3902 *
3903 * 'pnum' is set to the number of sectors (including and immediately following
3904 * the specified sector) that are known to be in the same
3905 * allocated/unallocated state.
3906 *
3907 * 'nb_sectors' is the max value 'pnum' should be set to. If nb_sectors goes
3908 * beyond the end of the disk image it will be clamped.
3909 */
3910 static int64_t coroutine_fn bdrv_co_get_block_status(BlockDriverState *bs,
3911 int64_t sector_num,
3912 int nb_sectors, int *pnum)
3913 {
3914 int64_t length;
3915 int64_t n;
3916 int64_t ret, ret2;
3917
3918 length = bdrv_getlength(bs);
3919 if (length < 0) {
3920 return length;
3921 }
3922
3923 if (sector_num >= (length >> BDRV_SECTOR_BITS)) {
3924 *pnum = 0;
3925 return 0;
3926 }
3927
3928 n = bs->total_sectors - sector_num;
3929 if (n < nb_sectors) {
3930 nb_sectors = n;
3931 }
3932
3933 if (!bs->drv->bdrv_co_get_block_status) {
3934 *pnum = nb_sectors;
3935 ret = BDRV_BLOCK_DATA | BDRV_BLOCK_ALLOCATED;
3936 if (bs->drv->protocol_name) {
3937 ret |= BDRV_BLOCK_OFFSET_VALID | (sector_num * BDRV_SECTOR_SIZE);
3938 }
3939 return ret;
3940 }
3941
3942 ret = bs->drv->bdrv_co_get_block_status(bs, sector_num, nb_sectors, pnum);
3943 if (ret < 0) {
3944 *pnum = 0;
3945 return ret;
3946 }
3947
3948 if (ret & BDRV_BLOCK_RAW) {
3949 assert(ret & BDRV_BLOCK_OFFSET_VALID);
3950 return bdrv_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3951 *pnum, pnum);
3952 }
3953
3954 if (ret & (BDRV_BLOCK_DATA | BDRV_BLOCK_ZERO)) {
3955 ret |= BDRV_BLOCK_ALLOCATED;
3956 }
3957
3958 if (!(ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO)) {
3959 if (bdrv_unallocated_blocks_are_zero(bs)) {
3960 ret |= BDRV_BLOCK_ZERO;
3961 } else if (bs->backing_hd) {
3962 BlockDriverState *bs2 = bs->backing_hd;
3963 int64_t length2 = bdrv_getlength(bs2);
3964 if (length2 >= 0 && sector_num >= (length2 >> BDRV_SECTOR_BITS)) {
3965 ret |= BDRV_BLOCK_ZERO;
3966 }
3967 }
3968 }
3969
3970 if (bs->file &&
3971 (ret & BDRV_BLOCK_DATA) && !(ret & BDRV_BLOCK_ZERO) &&
3972 (ret & BDRV_BLOCK_OFFSET_VALID)) {
3973 ret2 = bdrv_co_get_block_status(bs->file, ret >> BDRV_SECTOR_BITS,
3974 *pnum, pnum);
3975 if (ret2 >= 0) {
3976 /* Ignore errors. This is just providing extra information, it
3977 * is useful but not necessary.
3978 */
3979 ret |= (ret2 & BDRV_BLOCK_ZERO);
3980 }
3981 }
3982
3983 return ret;
3984 }
3985
3986 /* Coroutine wrapper for bdrv_get_block_status() */
3987 static void coroutine_fn bdrv_get_block_status_co_entry(void *opaque)
3988 {
3989 BdrvCoGetBlockStatusData *data = opaque;
3990 BlockDriverState *bs = data->bs;
3991
3992 data->ret = bdrv_co_get_block_status(bs, data->sector_num, data->nb_sectors,
3993 data->pnum);
3994 data->done = true;
3995 }
3996
3997 /*
3998 * Synchronous wrapper around bdrv_co_get_block_status().
3999 *
4000 * See bdrv_co_get_block_status() for details.
4001 */
4002 int64_t bdrv_get_block_status(BlockDriverState *bs, int64_t sector_num,
4003 int nb_sectors, int *pnum)
4004 {
4005 Coroutine *co;
4006 BdrvCoGetBlockStatusData data = {
4007 .bs = bs,
4008 .sector_num = sector_num,
4009 .nb_sectors = nb_sectors,
4010 .pnum = pnum,
4011 .done = false,
4012 };
4013
4014 if (qemu_in_coroutine()) {
4015 /* Fast-path if already in coroutine context */
4016 bdrv_get_block_status_co_entry(&data);
4017 } else {
4018 AioContext *aio_context = bdrv_get_aio_context(bs);
4019
4020 co = qemu_coroutine_create(bdrv_get_block_status_co_entry);
4021 qemu_coroutine_enter(co, &data);
4022 while (!data.done) {
4023 aio_poll(aio_context, true);
4024 }
4025 }
4026 return data.ret;
4027 }
4028
4029 int coroutine_fn bdrv_is_allocated(BlockDriverState *bs, int64_t sector_num,
4030 int nb_sectors, int *pnum)
4031 {
4032 int64_t ret = bdrv_get_block_status(bs, sector_num, nb_sectors, pnum);
4033 if (ret < 0) {
4034 return ret;
4035 }
4036 return (ret & BDRV_BLOCK_ALLOCATED);
4037 }
4038
4039 /*
4040 * Given an image chain: ... -> [BASE] -> [INTER1] -> [INTER2] -> [TOP]
4041 *
4042 * Return true if the given sector is allocated in any image between
4043 * BASE and TOP (inclusive). BASE can be NULL to check if the given
4044 * sector is allocated in any image of the chain. Return false otherwise.
4045 *
4046 * 'pnum' is set to the number of sectors (including and immediately following
4047 * the specified sector) that are known to be in the same
4048 * allocated/unallocated state.
4049 *
4050 */
4051 int bdrv_is_allocated_above(BlockDriverState *top,
4052 BlockDriverState *base,
4053 int64_t sector_num,
4054 int nb_sectors, int *pnum)
4055 {
4056 BlockDriverState *intermediate;
4057 int ret, n = nb_sectors;
4058
4059 intermediate = top;
4060 while (intermediate && intermediate != base) {
4061 int pnum_inter;
4062 ret = bdrv_is_allocated(intermediate, sector_num, nb_sectors,
4063 &pnum_inter);
4064 if (ret < 0) {
4065 return ret;
4066 } else if (ret) {
4067 *pnum = pnum_inter;
4068 return 1;
4069 }
4070
4071 /*
4072 * [sector_num, nb_sectors] is unallocated on top but intermediate
4073 * might have
4074 *
4075 * [sector_num+x, nr_sectors] allocated.
4076 */
4077 if (n > pnum_inter &&
4078 (intermediate == top ||
4079 sector_num + pnum_inter < intermediate->total_sectors)) {
4080 n = pnum_inter;
4081 }
4082
4083 intermediate = intermediate->backing_hd;
4084 }
4085
4086 *pnum = n;
4087 return 0;
4088 }
4089
4090 const char *bdrv_get_encrypted_filename(BlockDriverState *bs)
4091 {
4092 if (bs->backing_hd && bs->backing_hd->encrypted)
4093 return bs->backing_file;
4094 else if (bs->encrypted)
4095 return bs->filename;
4096 else
4097 return NULL;
4098 }
4099
4100 void bdrv_get_backing_filename(BlockDriverState *bs,
4101 char *filename, int filename_size)
4102 {
4103 pstrcpy(filename, filename_size, bs->backing_file);
4104 }
4105
4106 int bdrv_write_compressed(BlockDriverState *bs, int64_t sector_num,
4107 const uint8_t *buf, int nb_sectors)
4108 {
4109 BlockDriver *drv = bs->drv;
4110 if (!drv)
4111 return -ENOMEDIUM;
4112 if (!drv->bdrv_write_compressed)
4113 return -ENOTSUP;
4114 if (bdrv_check_request(bs, sector_num, nb_sectors))
4115 return -EIO;
4116
4117 assert(QLIST_EMPTY(&bs->dirty_bitmaps));
4118
4119 return drv->bdrv_write_compressed(bs, sector_num, buf, nb_sectors);
4120 }
4121
4122 int bdrv_get_info(BlockDriverState *bs, BlockDriverInfo *bdi)
4123 {
4124 BlockDriver *drv = bs->drv;
4125 if (!drv)
4126 return -ENOMEDIUM;
4127 if (!drv->bdrv_get_info)
4128 return -ENOTSUP;
4129 memset(bdi, 0, sizeof(*bdi));
4130 return drv->bdrv_get_info(bs, bdi);
4131 }
4132
4133 ImageInfoSpecific *bdrv_get_specific_info(BlockDriverState *bs)
4134 {
4135 BlockDriver *drv = bs->drv;
4136 if (drv && drv->bdrv_get_specific_info) {
4137 return drv->bdrv_get_specific_info(bs);
4138 }
4139 return NULL;
4140 }
4141
4142 int bdrv_save_vmstate(BlockDriverState *bs, const uint8_t *buf,
4143 int64_t pos, int size)
4144 {
4145 QEMUIOVector qiov;
4146 struct iovec iov = {
4147 .iov_base = (void *) buf,
4148 .iov_len = size,
4149 };
4150
4151 qemu_iovec_init_external(&qiov, &iov, 1);
4152 return bdrv_writev_vmstate(bs, &qiov, pos);
4153 }
4154
4155 int bdrv_writev_vmstate(BlockDriverState *bs, QEMUIOVector *qiov, int64_t pos)
4156 {
4157 BlockDriver *drv = bs->drv;
4158
4159 if (!drv) {
4160 return -ENOMEDIUM;
4161 } else if (drv->bdrv_save_vmstate) {
4162 return drv->bdrv_save_vmstate(bs, qiov, pos);
4163 } else if (bs->file) {
4164 return bdrv_writev_vmstate(bs->file, qiov, pos);
4165 }
4166
4167 return -ENOTSUP;
4168 }
4169
4170 int bdrv_load_vmstate(BlockDriverState *bs, uint8_t *buf,
4171 int64_t pos, int size)
4172 {
4173 BlockDriver *drv = bs->drv;
4174 if (!drv)
4175 return -ENOMEDIUM;
4176 if (drv->bdrv_load_vmstate)
4177 return drv->bdrv_load_vmstate(bs, buf, pos, size);
4178 if (bs->file)
4179 return bdrv_load_vmstate(bs->file, buf, pos, size);
4180 return -ENOTSUP;
4181 }
4182
4183 void bdrv_debug_event(BlockDriverState *bs, BlkDebugEvent event)
4184 {
4185 if (!bs || !bs->drv || !bs->drv->bdrv_debug_event) {
4186 return;
4187 }
4188
4189 bs->drv->bdrv_debug_event(bs, event);
4190 }
4191
4192 int bdrv_debug_breakpoint(BlockDriverState *bs, const char *event,
4193 const char *tag)
4194 {
4195 while (bs && bs->drv && !bs->drv->bdrv_debug_breakpoint) {
4196 bs = bs->file;
4197 }
4198
4199 if (bs && bs->drv && bs->drv->bdrv_debug_breakpoint) {
4200 return bs->drv->bdrv_debug_breakpoint(bs, event, tag);
4201 }
4202
4203 return -ENOTSUP;
4204 }
4205
4206 int bdrv_debug_remove_breakpoint(BlockDriverState *bs, const char *tag)
4207 {
4208 while (bs && bs->drv && !bs->drv->bdrv_debug_remove_breakpoint) {
4209 bs = bs->file;
4210 }
4211
4212 if (bs && bs->drv && bs->drv->bdrv_debug_remove_breakpoint) {
4213 return bs->drv->bdrv_debug_remove_breakpoint(bs, tag);
4214 }
4215
4216 return -ENOTSUP;
4217 }
4218
4219 int bdrv_debug_resume(BlockDriverState *bs, const char *tag)
4220 {
4221 while (bs && (!bs->drv || !bs->drv->bdrv_debug_resume)) {
4222 bs = bs->file;
4223 }
4224
4225 if (bs && bs->drv && bs->drv->bdrv_debug_resume) {
4226 return bs->drv->bdrv_debug_resume(bs, tag);
4227 }
4228
4229 return -ENOTSUP;
4230 }
4231
4232 bool bdrv_debug_is_suspended(BlockDriverState *bs, const char *tag)
4233 {
4234 while (bs && bs->drv && !bs->drv->bdrv_debug_is_suspended) {
4235 bs = bs->file;
4236 }
4237
4238 if (bs && bs->drv && bs->drv->bdrv_debug_is_suspended) {
4239 return bs->drv->bdrv_debug_is_suspended(bs, tag);
4240 }
4241
4242 return false;
4243 }
4244
4245 int bdrv_is_snapshot(BlockDriverState *bs)
4246 {
4247 return !!(bs->open_flags & BDRV_O_SNAPSHOT);
4248 }
4249
4250 /* backing_file can either be relative, or absolute, or a protocol. If it is
4251 * relative, it must be relative to the chain. So, passing in bs->filename
4252 * from a BDS as backing_file should not be done, as that may be relative to
4253 * the CWD rather than the chain. */
4254 BlockDriverState *bdrv_find_backing_image(BlockDriverState *bs,
4255 const char *backing_file)
4256 {
4257 char *filename_full = NULL;
4258 char *backing_file_full = NULL;
4259 char *filename_tmp = NULL;
4260 int is_protocol = 0;
4261 BlockDriverState *curr_bs = NULL;
4262 BlockDriverState *retval = NULL;
4263
4264 if (!bs || !bs->drv || !backing_file) {
4265 return NULL;
4266 }
4267
4268 filename_full = g_malloc(PATH_MAX);
4269 backing_file_full = g_malloc(PATH_MAX);
4270 filename_tmp = g_malloc(PATH_MAX);
4271
4272 is_protocol = path_has_protocol(backing_file);
4273
4274 for (curr_bs = bs; curr_bs->backing_hd; curr_bs = curr_bs->backing_hd) {
4275
4276 /* If either of the filename paths is actually a protocol, then
4277 * compare unmodified paths; otherwise make paths relative */
4278 if (is_protocol || path_has_protocol(curr_bs->backing_file)) {
4279 if (strcmp(backing_file, curr_bs->backing_file) == 0) {
4280 retval = curr_bs->backing_hd;
4281 break;
4282 }
4283 } else {
4284 /* If not an absolute filename path, make it relative to the current
4285 * image's filename path */
4286 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4287 backing_file);
4288
4289 /* We are going to compare absolute pathnames */
4290 if (!realpath(filename_tmp, filename_full)) {
4291 continue;
4292 }
4293
4294 /* We need to make sure the backing filename we are comparing against
4295 * is relative to the current image filename (or absolute) */
4296 path_combine(filename_tmp, PATH_MAX, curr_bs->filename,
4297 curr_bs->backing_file);
4298
4299 if (!realpath(filename_tmp, backing_file_full)) {
4300 continue;
4301 }
4302
4303 if (strcmp(backing_file_full, filename_full) == 0) {
4304 retval = curr_bs->backing_hd;
4305 break;
4306 }
4307 }
4308 }
4309
4310 g_free(filename_full);
4311 g_free(backing_file_full);
4312 g_free(filename_tmp);
4313 return retval;
4314 }
4315
4316 int bdrv_get_backing_file_depth(BlockDriverState *bs)
4317 {
4318 if (!bs->drv) {
4319 return 0;
4320 }
4321
4322 if (!bs->backing_hd) {
4323 return 0;
4324 }
4325
4326 return 1 + bdrv_get_backing_file_depth(bs->backing_hd);
4327 }
4328
4329 BlockDriverState *bdrv_find_base(BlockDriverState *bs)
4330 {
4331 BlockDriverState *curr_bs = NULL;
4332
4333 if (!bs) {
4334 return NULL;
4335 }
4336
4337 curr_bs = bs;
4338
4339 while (curr_bs->backing_hd) {
4340 curr_bs = curr_bs->backing_hd;
4341 }
4342 return curr_bs;
4343 }
4344
4345 /**************************************************************/
4346 /* async I/Os */
4347
4348 BlockDriverAIOCB *bdrv_aio_readv(BlockDriverState *bs, int64_t sector_num,
4349 QEMUIOVector *qiov, int nb_sectors,
4350 BlockDriverCompletionFunc *cb, void *opaque)
4351 {
4352 trace_bdrv_aio_readv(bs, sector_num, nb_sectors, opaque);
4353
4354 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4355 cb, opaque, false);
4356 }
4357
4358 BlockDriverAIOCB *bdrv_aio_writev(BlockDriverState *bs, int64_t sector_num,
4359 QEMUIOVector *qiov, int nb_sectors,
4360 BlockDriverCompletionFunc *cb, void *opaque)
4361 {
4362 trace_bdrv_aio_writev(bs, sector_num, nb_sectors, opaque);
4363
4364 return bdrv_co_aio_rw_vector(bs, sector_num, qiov, nb_sectors, 0,
4365 cb, opaque, true);
4366 }
4367
4368 BlockDriverAIOCB *bdrv_aio_write_zeroes(BlockDriverState *bs,
4369 int64_t sector_num, int nb_sectors, BdrvRequestFlags flags,
4370 BlockDriverCompletionFunc *cb, void *opaque)
4371 {
4372 trace_bdrv_aio_write_zeroes(bs, sector_num, nb_sectors, flags, opaque);
4373
4374 return bdrv_co_aio_rw_vector(bs, sector_num, NULL, nb_sectors,
4375 BDRV_REQ_ZERO_WRITE | flags,
4376 cb, opaque, true);
4377 }
4378
4379
4380 typedef struct MultiwriteCB {
4381 int error;
4382 int num_requests;
4383 int num_callbacks;
4384 struct {
4385 BlockDriverCompletionFunc *cb;
4386 void *opaque;
4387 QEMUIOVector *free_qiov;
4388 } callbacks[];
4389 } MultiwriteCB;
4390
4391 static void multiwrite_user_cb(MultiwriteCB *mcb)
4392 {
4393 int i;
4394
4395 for (i = 0; i < mcb->num_callbacks; i++) {
4396 mcb->callbacks[i].cb(mcb->callbacks[i].opaque, mcb->error);
4397 if (mcb->callbacks[i].free_qiov) {
4398 qemu_iovec_destroy(mcb->callbacks[i].free_qiov);
4399 }
4400 g_free(mcb->callbacks[i].free_qiov);
4401 }
4402 }
4403
4404 static void multiwrite_cb(void *opaque, int ret)
4405 {
4406 MultiwriteCB *mcb = opaque;
4407
4408 trace_multiwrite_cb(mcb, ret);
4409
4410 if (ret < 0 && !mcb->error) {
4411 mcb->error = ret;
4412 }
4413
4414 mcb->num_requests--;
4415 if (mcb->num_requests == 0) {
4416 multiwrite_user_cb(mcb);
4417 g_free(mcb);
4418 }
4419 }
4420
4421 static int multiwrite_req_compare(const void *a, const void *b)
4422 {
4423 const BlockRequest *req1 = a, *req2 = b;
4424
4425 /*
4426 * Note that we can't simply subtract req2->sector from req1->sector
4427 * here as that could overflow the return value.
4428 */
4429 if (req1->sector > req2->sector) {
4430 return 1;
4431 } else if (req1->sector < req2->sector) {
4432 return -1;
4433 } else {
4434 return 0;
4435 }
4436 }
4437
4438 /*
4439 * Takes a bunch of requests and tries to merge them. Returns the number of
4440 * requests that remain after merging.
4441 */
4442 static int multiwrite_merge(BlockDriverState *bs, BlockRequest *reqs,
4443 int num_reqs, MultiwriteCB *mcb)
4444 {
4445 int i, outidx;
4446
4447 // Sort requests by start sector
4448 qsort(reqs, num_reqs, sizeof(*reqs), &multiwrite_req_compare);
4449
4450 // Check if adjacent requests touch the same clusters. If so, combine them,
4451 // filling up gaps with zero sectors.
4452 outidx = 0;
4453 for (i = 1; i < num_reqs; i++) {
4454 int merge = 0;
4455 int64_t oldreq_last = reqs[outidx].sector + reqs[outidx].nb_sectors;
4456
4457 // Handle exactly sequential writes and overlapping writes.
4458 if (reqs[i].sector <= oldreq_last) {
4459 merge = 1;
4460 }
4461
4462 if (reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1 > IOV_MAX) {
4463 merge = 0;
4464 }
4465
4466 if (merge) {
4467 size_t size;
4468 QEMUIOVector *qiov = g_malloc0(sizeof(*qiov));
4469 qemu_iovec_init(qiov,
4470 reqs[outidx].qiov->niov + reqs[i].qiov->niov + 1);
4471
4472 // Add the first request to the merged one. If the requests are
4473 // overlapping, drop the last sectors of the first request.
4474 size = (reqs[i].sector - reqs[outidx].sector) << 9;
4475 qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
4476
4477 // We should need to add any zeros between the two requests
4478 assert (reqs[i].sector <= oldreq_last);
4479
4480 // Add the second request
4481 qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
4482
4483 reqs[outidx].nb_sectors = qiov->size >> 9;
4484 reqs[outidx].qiov = qiov;
4485
4486 mcb->callbacks[i].free_qiov = reqs[outidx].qiov;
4487 } else {
4488 outidx++;
4489 reqs[outidx].sector = reqs[i].sector;
4490 reqs[outidx].nb_sectors = reqs[i].nb_sectors;
4491 reqs[outidx].qiov = reqs[i].qiov;
4492 }
4493 }
4494
4495 return outidx + 1;
4496 }
4497
4498 /*
4499 * Submit multiple AIO write requests at once.
4500 *
4501 * On success, the function returns 0 and all requests in the reqs array have
4502 * been submitted. In error case this function returns -1, and any of the
4503 * requests may or may not be submitted yet. In particular, this means that the
4504 * callback will be called for some of the requests, for others it won't. The
4505 * caller must check the error field of the BlockRequest to wait for the right
4506 * callbacks (if error != 0, no callback will be called).
4507 *
4508 * The implementation may modify the contents of the reqs array, e.g. to merge
4509 * requests. However, the fields opaque and error are left unmodified as they
4510 * are used to signal failure for a single request to the caller.
4511 */
4512 int bdrv_aio_multiwrite(BlockDriverState *bs, BlockRequest *reqs, int num_reqs)
4513 {
4514 MultiwriteCB *mcb;
4515 int i;
4516
4517 /* don't submit writes if we don't have a medium */
4518 if (bs->drv == NULL) {
4519 for (i = 0; i < num_reqs; i++) {
4520 reqs[i].error = -ENOMEDIUM;
4521 }
4522 return -1;
4523 }
4524
4525 if (num_reqs == 0) {
4526 return 0;
4527 }
4528
4529 // Create MultiwriteCB structure
4530 mcb = g_malloc0(sizeof(*mcb) + num_reqs * sizeof(*mcb->callbacks));
4531 mcb->num_requests = 0;
4532 mcb->num_callbacks = num_reqs;
4533
4534 for (i = 0; i < num_reqs; i++) {
4535 mcb->callbacks[i].cb = reqs[i].cb;
4536 mcb->callbacks[i].opaque = reqs[i].opaque;
4537 }
4538
4539 // Check for mergable requests
4540 num_reqs = multiwrite_merge(bs, reqs, num_reqs, mcb);
4541
4542 trace_bdrv_aio_multiwrite(mcb, mcb->num_callbacks, num_reqs);
4543
4544 /* Run the aio requests. */
4545 mcb->num_requests = num_reqs;
4546 for (i = 0; i < num_reqs; i++) {
4547 bdrv_co_aio_rw_vector(bs, reqs[i].sector, reqs[i].qiov,
4548 reqs[i].nb_sectors, reqs[i].flags,
4549 multiwrite_cb, mcb,
4550 true);
4551 }
4552
4553 return 0;
4554 }
4555
4556 void bdrv_aio_cancel(BlockDriverAIOCB *acb)
4557 {
4558 acb->aiocb_info->cancel(acb);
4559 }
4560
4561 /**************************************************************/
4562 /* async block device emulation */
4563
4564 typedef struct BlockDriverAIOCBSync {
4565 BlockDriverAIOCB common;
4566 QEMUBH *bh;
4567 int ret;
4568 /* vector translation state */
4569 QEMUIOVector *qiov;
4570 uint8_t *bounce;
4571 int is_write;
4572 } BlockDriverAIOCBSync;
4573
4574 static void bdrv_aio_cancel_em(BlockDriverAIOCB *blockacb)
4575 {
4576 BlockDriverAIOCBSync *acb =
4577 container_of(blockacb, BlockDriverAIOCBSync, common);
4578 qemu_bh_delete(acb->bh);
4579 acb->bh = NULL;
4580 qemu_aio_release(acb);
4581 }
4582
4583 static const AIOCBInfo bdrv_em_aiocb_info = {
4584 .aiocb_size = sizeof(BlockDriverAIOCBSync),
4585 .cancel = bdrv_aio_cancel_em,
4586 };
4587
4588 static void bdrv_aio_bh_cb(void *opaque)
4589 {
4590 BlockDriverAIOCBSync *acb = opaque;
4591
4592 if (!acb->is_write)
4593 qemu_iovec_from_buf(acb->qiov, 0, acb->bounce, acb->qiov->size);
4594 qemu_vfree(acb->bounce);
4595 acb->common.cb(acb->common.opaque, acb->ret);
4596 qemu_bh_delete(acb->bh);
4597 acb->bh = NULL;
4598 qemu_aio_release(acb);
4599 }
4600
4601 static BlockDriverAIOCB *bdrv_aio_rw_vector(BlockDriverState *bs,
4602 int64_t sector_num,
4603 QEMUIOVector *qiov,
4604 int nb_sectors,
4605 BlockDriverCompletionFunc *cb,
4606 void *opaque,
4607 int is_write)
4608
4609 {
4610 BlockDriverAIOCBSync *acb;
4611
4612 acb = qemu_aio_get(&bdrv_em_aiocb_info, bs, cb, opaque);
4613 acb->is_write = is_write;
4614 acb->qiov = qiov;
4615 acb->bounce = qemu_blockalign(bs, qiov->size);
4616 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_aio_bh_cb, acb);
4617
4618 if (is_write) {
4619 qemu_iovec_to_buf(acb->qiov, 0, acb->bounce, qiov->size);
4620 acb->ret = bs->drv->bdrv_write(bs, sector_num, acb->bounce, nb_sectors);
4621 } else {
4622 acb->ret = bs->drv->bdrv_read(bs, sector_num, acb->bounce, nb_sectors);
4623 }
4624
4625 qemu_bh_schedule(acb->bh);
4626
4627 return &acb->common;
4628 }
4629
4630 static BlockDriverAIOCB *bdrv_aio_readv_em(BlockDriverState *bs,
4631 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4632 BlockDriverCompletionFunc *cb, void *opaque)
4633 {
4634 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 0);
4635 }
4636
4637 static BlockDriverAIOCB *bdrv_aio_writev_em(BlockDriverState *bs,
4638 int64_t sector_num, QEMUIOVector *qiov, int nb_sectors,
4639 BlockDriverCompletionFunc *cb, void *opaque)
4640 {
4641 return bdrv_aio_rw_vector(bs, sector_num, qiov, nb_sectors, cb, opaque, 1);
4642 }
4643
4644
4645 typedef struct BlockDriverAIOCBCoroutine {
4646 BlockDriverAIOCB common;
4647 BlockRequest req;
4648 bool is_write;
4649 bool *done;
4650 QEMUBH* bh;
4651 } BlockDriverAIOCBCoroutine;
4652
4653 static void bdrv_aio_co_cancel_em(BlockDriverAIOCB *blockacb)
4654 {
4655 AioContext *aio_context = bdrv_get_aio_context(blockacb->bs);
4656 BlockDriverAIOCBCoroutine *acb =
4657 container_of(blockacb, BlockDriverAIOCBCoroutine, common);
4658 bool done = false;
4659
4660 acb->done = &done;
4661 while (!done) {
4662 aio_poll(aio_context, true);
4663 }
4664 }
4665
4666 static const AIOCBInfo bdrv_em_co_aiocb_info = {
4667 .aiocb_size = sizeof(BlockDriverAIOCBCoroutine),
4668 .cancel = bdrv_aio_co_cancel_em,
4669 };
4670
4671 static void bdrv_co_em_bh(void *opaque)
4672 {
4673 BlockDriverAIOCBCoroutine *acb = opaque;
4674
4675 acb->common.cb(acb->common.opaque, acb->req.error);
4676
4677 if (acb->done) {
4678 *acb->done = true;
4679 }
4680
4681 qemu_bh_delete(acb->bh);
4682 qemu_aio_release(acb);
4683 }
4684
4685 /* Invoke bdrv_co_do_readv/bdrv_co_do_writev */
4686 static void coroutine_fn bdrv_co_do_rw(void *opaque)
4687 {
4688 BlockDriverAIOCBCoroutine *acb = opaque;
4689 BlockDriverState *bs = acb->common.bs;
4690
4691 if (!acb->is_write) {
4692 acb->req.error = bdrv_co_do_readv(bs, acb->req.sector,
4693 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4694 } else {
4695 acb->req.error = bdrv_co_do_writev(bs, acb->req.sector,
4696 acb->req.nb_sectors, acb->req.qiov, acb->req.flags);
4697 }
4698
4699 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4700 qemu_bh_schedule(acb->bh);
4701 }
4702
4703 static BlockDriverAIOCB *bdrv_co_aio_rw_vector(BlockDriverState *bs,
4704 int64_t sector_num,
4705 QEMUIOVector *qiov,
4706 int nb_sectors,
4707 BdrvRequestFlags flags,
4708 BlockDriverCompletionFunc *cb,
4709 void *opaque,
4710 bool is_write)
4711 {
4712 Coroutine *co;
4713 BlockDriverAIOCBCoroutine *acb;
4714
4715 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4716 acb->req.sector = sector_num;
4717 acb->req.nb_sectors = nb_sectors;
4718 acb->req.qiov = qiov;
4719 acb->req.flags = flags;
4720 acb->is_write = is_write;
4721 acb->done = NULL;
4722
4723 co = qemu_coroutine_create(bdrv_co_do_rw);
4724 qemu_coroutine_enter(co, acb);
4725
4726 return &acb->common;
4727 }
4728
4729 static void coroutine_fn bdrv_aio_flush_co_entry(void *opaque)
4730 {
4731 BlockDriverAIOCBCoroutine *acb = opaque;
4732 BlockDriverState *bs = acb->common.bs;
4733
4734 acb->req.error = bdrv_co_flush(bs);
4735 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4736 qemu_bh_schedule(acb->bh);
4737 }
4738
4739 BlockDriverAIOCB *bdrv_aio_flush(BlockDriverState *bs,
4740 BlockDriverCompletionFunc *cb, void *opaque)
4741 {
4742 trace_bdrv_aio_flush(bs, opaque);
4743
4744 Coroutine *co;
4745 BlockDriverAIOCBCoroutine *acb;
4746
4747 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4748 acb->done = NULL;
4749
4750 co = qemu_coroutine_create(bdrv_aio_flush_co_entry);
4751 qemu_coroutine_enter(co, acb);
4752
4753 return &acb->common;
4754 }
4755
4756 static void coroutine_fn bdrv_aio_discard_co_entry(void *opaque)
4757 {
4758 BlockDriverAIOCBCoroutine *acb = opaque;
4759 BlockDriverState *bs = acb->common.bs;
4760
4761 acb->req.error = bdrv_co_discard(bs, acb->req.sector, acb->req.nb_sectors);
4762 acb->bh = aio_bh_new(bdrv_get_aio_context(bs), bdrv_co_em_bh, acb);
4763 qemu_bh_schedule(acb->bh);
4764 }
4765
4766 BlockDriverAIOCB *bdrv_aio_discard(BlockDriverState *bs,
4767 int64_t sector_num, int nb_sectors,
4768 BlockDriverCompletionFunc *cb, void *opaque)
4769 {
4770 Coroutine *co;
4771 BlockDriverAIOCBCoroutine *acb;
4772
4773 trace_bdrv_aio_discard(bs, sector_num, nb_sectors, opaque);
4774
4775 acb = qemu_aio_get(&bdrv_em_co_aiocb_info, bs, cb, opaque);
4776 acb->req.sector = sector_num;
4777 acb->req.nb_sectors = nb_sectors;
4778 acb->done = NULL;
4779 co = qemu_coroutine_create(bdrv_aio_discard_co_entry);
4780 qemu_coroutine_enter(co, acb);
4781
4782 return &acb->common;
4783 }
4784
4785 void bdrv_init(void)
4786 {
4787 module_call_init(MODULE_INIT_BLOCK);
4788 }
4789
4790 void bdrv_init_with_whitelist(void)
4791 {
4792 use_bdrv_whitelist = 1;
4793 bdrv_init();
4794 }
4795
4796 void *qemu_aio_get(const AIOCBInfo *aiocb_info, BlockDriverState *bs,
4797 BlockDriverCompletionFunc *cb, void *opaque)
4798 {
4799 BlockDriverAIOCB *acb;
4800
4801 acb = g_slice_alloc(aiocb_info->aiocb_size);
4802 acb->aiocb_info = aiocb_info;
4803 acb->bs = bs;
4804 acb->cb = cb;
4805 acb->opaque = opaque;
4806 return acb;
4807 }
4808
4809 void qemu_aio_release(void *p)
4810 {
4811 BlockDriverAIOCB *acb = p;
4812 g_slice_free1(acb->aiocb_info->aiocb_size, acb);
4813 }
4814
4815 /**************************************************************/
4816 /* Coroutine block device emulation */
4817
4818 typedef struct CoroutineIOCompletion {
4819 Coroutine *coroutine;
4820 int ret;
4821 } CoroutineIOCompletion;
4822
4823 static void bdrv_co_io_em_complete(void *opaque, int ret)
4824 {
4825 CoroutineIOCompletion *co = opaque;
4826
4827 co->ret = ret;
4828 qemu_coroutine_enter(co->coroutine, NULL);
4829 }
4830
4831 static int coroutine_fn bdrv_co_io_em(BlockDriverState *bs, int64_t sector_num,
4832 int nb_sectors, QEMUIOVector *iov,
4833 bool is_write)
4834 {
4835 CoroutineIOCompletion co = {
4836 .coroutine = qemu_coroutine_self(),
4837 };
4838 BlockDriverAIOCB *acb;
4839
4840 if (is_write) {
4841 acb = bs->drv->bdrv_aio_writev(bs, sector_num, iov, nb_sectors,
4842 bdrv_co_io_em_complete, &co);
4843 } else {
4844 acb = bs->drv->bdrv_aio_readv(bs, sector_num, iov, nb_sectors,
4845 bdrv_co_io_em_complete, &co);
4846 }
4847
4848 trace_bdrv_co_io_em(bs, sector_num, nb_sectors, is_write, acb);
4849 if (!acb) {
4850 return -EIO;
4851 }
4852 qemu_coroutine_yield();
4853
4854 return co.ret;
4855 }
4856
4857 static int coroutine_fn bdrv_co_readv_em(BlockDriverState *bs,
4858 int64_t sector_num, int nb_sectors,
4859 QEMUIOVector *iov)
4860 {
4861 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, false);
4862 }
4863
4864 static int coroutine_fn bdrv_co_writev_em(BlockDriverState *bs,
4865 int64_t sector_num, int nb_sectors,
4866 QEMUIOVector *iov)
4867 {
4868 return bdrv_co_io_em(bs, sector_num, nb_sectors, iov, true);
4869 }
4870
4871 static void coroutine_fn bdrv_flush_co_entry(void *opaque)
4872 {
4873 RwCo *rwco = opaque;
4874
4875 rwco->ret = bdrv_co_flush(rwco->bs);
4876 }
4877
4878 int coroutine_fn bdrv_co_flush(BlockDriverState *bs)
4879 {
4880 int ret;
4881
4882 if (!bs || !bdrv_is_inserted(bs) || bdrv_is_read_only(bs)) {
4883 return 0;
4884 }
4885
4886 /* Write back cached data to the OS even with cache=unsafe */
4887 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_OS);
4888 if (bs->drv->bdrv_co_flush_to_os) {
4889 ret = bs->drv->bdrv_co_flush_to_os(bs);
4890 if (ret < 0) {
4891 return ret;
4892 }
4893 }
4894
4895 /* But don't actually force it to the disk with cache=unsafe */
4896 if (bs->open_flags & BDRV_O_NO_FLUSH) {
4897 goto flush_parent;
4898 }
4899
4900 BLKDBG_EVENT(bs->file, BLKDBG_FLUSH_TO_DISK);
4901 if (bs->drv->bdrv_co_flush_to_disk) {
4902 ret = bs->drv->bdrv_co_flush_to_disk(bs);
4903 } else if (bs->drv->bdrv_aio_flush) {
4904 BlockDriverAIOCB *acb;
4905 CoroutineIOCompletion co = {
4906 .coroutine = qemu_coroutine_self(),
4907 };
4908
4909 acb = bs->drv->bdrv_aio_flush(bs, bdrv_co_io_em_complete, &co);
4910 if (acb == NULL) {
4911 ret = -EIO;
4912 } else {
4913 qemu_coroutine_yield();
4914 ret = co.ret;
4915 }
4916 } else {
4917 /*
4918 * Some block drivers always operate in either writethrough or unsafe
4919 * mode and don't support bdrv_flush therefore. Usually qemu doesn't
4920 * know how the server works (because the behaviour is hardcoded or
4921 * depends on server-side configuration), so we can't ensure that
4922 * everything is safe on disk. Returning an error doesn't work because
4923 * that would break guests even if the server operates in writethrough
4924 * mode.
4925 *
4926 * Let's hope the user knows what he's doing.
4927 */
4928 ret = 0;
4929 }
4930 if (ret < 0) {
4931 return ret;
4932 }
4933
4934 /* Now flush the underlying protocol. It will also have BDRV_O_NO_FLUSH
4935 * in the case of cache=unsafe, so there are no useless flushes.
4936 */
4937 flush_parent:
4938 return bdrv_co_flush(bs->file);
4939 }
4940
4941 void bdrv_invalidate_cache(BlockDriverState *bs, Error **errp)
4942 {
4943 Error *local_err = NULL;
4944 int ret;
4945
4946 if (!bs->drv) {
4947 return;
4948 }
4949
4950 if (bs->drv->bdrv_invalidate_cache) {
4951 bs->drv->bdrv_invalidate_cache(bs, &local_err);
4952 } else if (bs->file) {
4953 bdrv_invalidate_cache(bs->file, &local_err);
4954 }
4955 if (local_err) {
4956 error_propagate(errp, local_err);
4957 return;
4958 }
4959
4960 ret = refresh_total_sectors(bs, bs->total_sectors);
4961 if (ret < 0) {
4962 error_setg_errno(errp, -ret, "Could not refresh total sector count");
4963 return;
4964 }
4965 }
4966
4967 void bdrv_invalidate_cache_all(Error **errp)
4968 {
4969 BlockDriverState *bs;
4970 Error *local_err = NULL;
4971
4972 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4973 AioContext *aio_context = bdrv_get_aio_context(bs);
4974
4975 aio_context_acquire(aio_context);
4976 bdrv_invalidate_cache(bs, &local_err);
4977 aio_context_release(aio_context);
4978 if (local_err) {
4979 error_propagate(errp, local_err);
4980 return;
4981 }
4982 }
4983 }
4984
4985 void bdrv_clear_incoming_migration_all(void)
4986 {
4987 BlockDriverState *bs;
4988
4989 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
4990 AioContext *aio_context = bdrv_get_aio_context(bs);
4991
4992 aio_context_acquire(aio_context);
4993 bs->open_flags = bs->open_flags & ~(BDRV_O_INCOMING);
4994 aio_context_release(aio_context);
4995 }
4996 }
4997
4998 int bdrv_flush(BlockDriverState *bs)
4999 {
5000 Coroutine *co;
5001 RwCo rwco = {
5002 .bs = bs,
5003 .ret = NOT_DONE,
5004 };
5005
5006 if (qemu_in_coroutine()) {
5007 /* Fast-path if already in coroutine context */
5008 bdrv_flush_co_entry(&rwco);
5009 } else {
5010 AioContext *aio_context = bdrv_get_aio_context(bs);
5011
5012 co = qemu_coroutine_create(bdrv_flush_co_entry);
5013 qemu_coroutine_enter(co, &rwco);
5014 while (rwco.ret == NOT_DONE) {
5015 aio_poll(aio_context, true);
5016 }
5017 }
5018
5019 return rwco.ret;
5020 }
5021
5022 typedef struct DiscardCo {
5023 BlockDriverState *bs;
5024 int64_t sector_num;
5025 int nb_sectors;
5026 int ret;
5027 } DiscardCo;
5028 static void coroutine_fn bdrv_discard_co_entry(void *opaque)
5029 {
5030 DiscardCo *rwco = opaque;
5031
5032 rwco->ret = bdrv_co_discard(rwco->bs, rwco->sector_num, rwco->nb_sectors);
5033 }
5034
5035 /* if no limit is specified in the BlockLimits use a default
5036 * of 32768 512-byte sectors (16 MiB) per request.
5037 */
5038 #define MAX_DISCARD_DEFAULT 32768
5039
5040 int coroutine_fn bdrv_co_discard(BlockDriverState *bs, int64_t sector_num,
5041 int nb_sectors)
5042 {
5043 int max_discard;
5044
5045 if (!bs->drv) {
5046 return -ENOMEDIUM;
5047 } else if (bdrv_check_request(bs, sector_num, nb_sectors)) {
5048 return -EIO;
5049 } else if (bs->read_only) {
5050 return -EROFS;
5051 }
5052
5053 bdrv_reset_dirty(bs, sector_num, nb_sectors);
5054
5055 /* Do nothing if disabled. */
5056 if (!(bs->open_flags & BDRV_O_UNMAP)) {
5057 return 0;
5058 }
5059
5060 if (!bs->drv->bdrv_co_discard && !bs->drv->bdrv_aio_discard) {
5061 return 0;
5062 }
5063
5064 max_discard = bs->bl.max_discard ? bs->bl.max_discard : MAX_DISCARD_DEFAULT;
5065 while (nb_sectors > 0) {
5066 int ret;
5067 int num = nb_sectors;
5068
5069 /* align request */
5070 if (bs->bl.discard_alignment &&
5071 num >= bs->bl.discard_alignment &&
5072 sector_num % bs->bl.discard_alignment) {
5073 if (num > bs->bl.discard_alignment) {
5074 num = bs->bl.discard_alignment;
5075 }
5076 num -= sector_num % bs->bl.discard_alignment;
5077 }
5078
5079 /* limit request size */
5080 if (num > max_discard) {
5081 num = max_discard;
5082 }
5083
5084 if (bs->drv->bdrv_co_discard) {
5085 ret = bs->drv->bdrv_co_discard(bs, sector_num, num);
5086 } else {
5087 BlockDriverAIOCB *acb;
5088 CoroutineIOCompletion co = {
5089 .coroutine = qemu_coroutine_self(),
5090 };
5091
5092 acb = bs->drv->bdrv_aio_discard(bs, sector_num, nb_sectors,
5093 bdrv_co_io_em_complete, &co);
5094 if (acb == NULL) {
5095 return -EIO;
5096 } else {
5097 qemu_coroutine_yield();
5098 ret = co.ret;
5099 }
5100 }
5101 if (ret && ret != -ENOTSUP) {
5102 return ret;
5103 }
5104
5105 sector_num += num;
5106 nb_sectors -= num;
5107 }
5108 return 0;
5109 }
5110
5111 int bdrv_discard(BlockDriverState *bs, int64_t sector_num, int nb_sectors)
5112 {
5113 Coroutine *co;
5114 DiscardCo rwco = {
5115 .bs = bs,
5116 .sector_num = sector_num,
5117 .nb_sectors = nb_sectors,
5118 .ret = NOT_DONE,
5119 };
5120
5121 if (qemu_in_coroutine()) {
5122 /* Fast-path if already in coroutine context */
5123 bdrv_discard_co_entry(&rwco);
5124 } else {
5125 AioContext *aio_context = bdrv_get_aio_context(bs);
5126
5127 co = qemu_coroutine_create(bdrv_discard_co_entry);
5128 qemu_coroutine_enter(co, &rwco);
5129 while (rwco.ret == NOT_DONE) {
5130 aio_poll(aio_context, true);
5131 }
5132 }
5133
5134 return rwco.ret;
5135 }
5136
5137 /**************************************************************/
5138 /* removable device support */
5139
5140 /**
5141 * Return TRUE if the media is present
5142 */
5143 int bdrv_is_inserted(BlockDriverState *bs)
5144 {
5145 BlockDriver *drv = bs->drv;
5146
5147 if (!drv)
5148 return 0;
5149 if (!drv->bdrv_is_inserted)
5150 return 1;
5151 return drv->bdrv_is_inserted(bs);
5152 }
5153
5154 /**
5155 * Return whether the media changed since the last call to this
5156 * function, or -ENOTSUP if we don't know. Most drivers don't know.
5157 */
5158 int bdrv_media_changed(BlockDriverState *bs)
5159 {
5160 BlockDriver *drv = bs->drv;
5161
5162 if (drv && drv->bdrv_media_changed) {
5163 return drv->bdrv_media_changed(bs);
5164 }
5165 return -ENOTSUP;
5166 }
5167
5168 /**
5169 * If eject_flag is TRUE, eject the media. Otherwise, close the tray
5170 */
5171 void bdrv_eject(BlockDriverState *bs, bool eject_flag)
5172 {
5173 BlockDriver *drv = bs->drv;
5174
5175 if (drv && drv->bdrv_eject) {
5176 drv->bdrv_eject(bs, eject_flag);
5177 }
5178
5179 if (bs->device_name[0] != '\0') {
5180 qapi_event_send_device_tray_moved(bdrv_get_device_name(bs),
5181 eject_flag, &error_abort);
5182 }
5183 }
5184
5185 /**
5186 * Lock or unlock the media (if it is locked, the user won't be able
5187 * to eject it manually).
5188 */
5189 void bdrv_lock_medium(BlockDriverState *bs, bool locked)
5190 {
5191 BlockDriver *drv = bs->drv;
5192
5193 trace_bdrv_lock_medium(bs, locked);
5194
5195 if (drv && drv->bdrv_lock_medium) {
5196 drv->bdrv_lock_medium(bs, locked);
5197 }
5198 }
5199
5200 /* needed for generic scsi interface */
5201
5202 int bdrv_ioctl(BlockDriverState *bs, unsigned long int req, void *buf)
5203 {
5204 BlockDriver *drv = bs->drv;
5205
5206 if (drv && drv->bdrv_ioctl)
5207 return drv->bdrv_ioctl(bs, req, buf);
5208 return -ENOTSUP;
5209 }
5210
5211 BlockDriverAIOCB *bdrv_aio_ioctl(BlockDriverState *bs,
5212 unsigned long int req, void *buf,
5213 BlockDriverCompletionFunc *cb, void *opaque)
5214 {
5215 BlockDriver *drv = bs->drv;
5216
5217 if (drv && drv->bdrv_aio_ioctl)
5218 return drv->bdrv_aio_ioctl(bs, req, buf, cb, opaque);
5219 return NULL;
5220 }
5221
5222 void bdrv_set_guest_block_size(BlockDriverState *bs, int align)
5223 {
5224 bs->guest_block_size = align;
5225 }
5226
5227 void *qemu_blockalign(BlockDriverState *bs, size_t size)
5228 {
5229 return qemu_memalign(bdrv_opt_mem_align(bs), size);
5230 }
5231
5232 /*
5233 * Check if all memory in this vector is sector aligned.
5234 */
5235 bool bdrv_qiov_is_aligned(BlockDriverState *bs, QEMUIOVector *qiov)
5236 {
5237 int i;
5238 size_t alignment = bdrv_opt_mem_align(bs);
5239
5240 for (i = 0; i < qiov->niov; i++) {
5241 if ((uintptr_t) qiov->iov[i].iov_base % alignment) {
5242 return false;
5243 }
5244 if (qiov->iov[i].iov_len % alignment) {
5245 return false;
5246 }
5247 }
5248
5249 return true;
5250 }
5251
5252 BdrvDirtyBitmap *bdrv_create_dirty_bitmap(BlockDriverState *bs, int granularity,
5253 Error **errp)
5254 {
5255 int64_t bitmap_size;
5256 BdrvDirtyBitmap *bitmap;
5257
5258 assert((granularity & (granularity - 1)) == 0);
5259
5260 granularity >>= BDRV_SECTOR_BITS;
5261 assert(granularity);
5262 bitmap_size = bdrv_getlength(bs);
5263 if (bitmap_size < 0) {
5264 error_setg_errno(errp, -bitmap_size, "could not get length of device");
5265 errno = -bitmap_size;
5266 return NULL;
5267 }
5268 bitmap_size >>= BDRV_SECTOR_BITS;
5269 bitmap = g_malloc0(sizeof(BdrvDirtyBitmap));
5270 bitmap->bitmap = hbitmap_alloc(bitmap_size, ffs(granularity) - 1);
5271 QLIST_INSERT_HEAD(&bs->dirty_bitmaps, bitmap, list);
5272 return bitmap;
5273 }
5274
5275 void bdrv_release_dirty_bitmap(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5276 {
5277 BdrvDirtyBitmap *bm, *next;
5278 QLIST_FOREACH_SAFE(bm, &bs->dirty_bitmaps, list, next) {
5279 if (bm == bitmap) {
5280 QLIST_REMOVE(bitmap, list);
5281 hbitmap_free(bitmap->bitmap);
5282 g_free(bitmap);
5283 return;
5284 }
5285 }
5286 }
5287
5288 BlockDirtyInfoList *bdrv_query_dirty_bitmaps(BlockDriverState *bs)
5289 {
5290 BdrvDirtyBitmap *bm;
5291 BlockDirtyInfoList *list = NULL;
5292 BlockDirtyInfoList **plist = &list;
5293
5294 QLIST_FOREACH(bm, &bs->dirty_bitmaps, list) {
5295 BlockDirtyInfo *info = g_malloc0(sizeof(BlockDirtyInfo));
5296 BlockDirtyInfoList *entry = g_malloc0(sizeof(BlockDirtyInfoList));
5297 info->count = bdrv_get_dirty_count(bs, bm);
5298 info->granularity =
5299 ((int64_t) BDRV_SECTOR_SIZE << hbitmap_granularity(bm->bitmap));
5300 entry->value = info;
5301 *plist = entry;
5302 plist = &entry->next;
5303 }
5304
5305 return list;
5306 }
5307
5308 int bdrv_get_dirty(BlockDriverState *bs, BdrvDirtyBitmap *bitmap, int64_t sector)
5309 {
5310 if (bitmap) {
5311 return hbitmap_get(bitmap->bitmap, sector);
5312 } else {
5313 return 0;
5314 }
5315 }
5316
5317 void bdrv_dirty_iter_init(BlockDriverState *bs,
5318 BdrvDirtyBitmap *bitmap, HBitmapIter *hbi)
5319 {
5320 hbitmap_iter_init(hbi, bitmap->bitmap, 0);
5321 }
5322
5323 void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
5324 int nr_sectors)
5325 {
5326 BdrvDirtyBitmap *bitmap;
5327 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5328 hbitmap_set(bitmap->bitmap, cur_sector, nr_sectors);
5329 }
5330 }
5331
5332 void bdrv_reset_dirty(BlockDriverState *bs, int64_t cur_sector, int nr_sectors)
5333 {
5334 BdrvDirtyBitmap *bitmap;
5335 QLIST_FOREACH(bitmap, &bs->dirty_bitmaps, list) {
5336 hbitmap_reset(bitmap->bitmap, cur_sector, nr_sectors);
5337 }
5338 }
5339
5340 int64_t bdrv_get_dirty_count(BlockDriverState *bs, BdrvDirtyBitmap *bitmap)
5341 {
5342 return hbitmap_count(bitmap->bitmap);
5343 }
5344
5345 /* Get a reference to bs */
5346 void bdrv_ref(BlockDriverState *bs)
5347 {
5348 bs->refcnt++;
5349 }
5350
5351 /* Release a previously grabbed reference to bs.
5352 * If after releasing, reference count is zero, the BlockDriverState is
5353 * deleted. */
5354 void bdrv_unref(BlockDriverState *bs)
5355 {
5356 assert(bs->refcnt > 0);
5357 if (--bs->refcnt == 0) {
5358 bdrv_delete(bs);
5359 }
5360 }
5361
5362 struct BdrvOpBlocker {
5363 Error *reason;
5364 QLIST_ENTRY(BdrvOpBlocker) list;
5365 };
5366
5367 bool bdrv_op_is_blocked(BlockDriverState *bs, BlockOpType op, Error **errp)
5368 {
5369 BdrvOpBlocker *blocker;
5370 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5371 if (!QLIST_EMPTY(&bs->op_blockers[op])) {
5372 blocker = QLIST_FIRST(&bs->op_blockers[op]);
5373 if (errp) {
5374 error_setg(errp, "Device '%s' is busy: %s",
5375 bs->device_name, error_get_pretty(blocker->reason));
5376 }
5377 return true;
5378 }
5379 return false;
5380 }
5381
5382 void bdrv_op_block(BlockDriverState *bs, BlockOpType op, Error *reason)
5383 {
5384 BdrvOpBlocker *blocker;
5385 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5386
5387 blocker = g_malloc0(sizeof(BdrvOpBlocker));
5388 blocker->reason = reason;
5389 QLIST_INSERT_HEAD(&bs->op_blockers[op], blocker, list);
5390 }
5391
5392 void bdrv_op_unblock(BlockDriverState *bs, BlockOpType op, Error *reason)
5393 {
5394 BdrvOpBlocker *blocker, *next;
5395 assert((int) op >= 0 && op < BLOCK_OP_TYPE_MAX);
5396 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
5397 if (blocker->reason == reason) {
5398 QLIST_REMOVE(blocker, list);
5399 g_free(blocker);
5400 }
5401 }
5402 }
5403
5404 void bdrv_op_block_all(BlockDriverState *bs, Error *reason)
5405 {
5406 int i;
5407 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5408 bdrv_op_block(bs, i, reason);
5409 }
5410 }
5411
5412 void bdrv_op_unblock_all(BlockDriverState *bs, Error *reason)
5413 {
5414 int i;
5415 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5416 bdrv_op_unblock(bs, i, reason);
5417 }
5418 }
5419
5420 bool bdrv_op_blocker_is_empty(BlockDriverState *bs)
5421 {
5422 int i;
5423
5424 for (i = 0; i < BLOCK_OP_TYPE_MAX; i++) {
5425 if (!QLIST_EMPTY(&bs->op_blockers[i])) {
5426 return false;
5427 }
5428 }
5429 return true;
5430 }
5431
5432 void bdrv_iostatus_enable(BlockDriverState *bs)
5433 {
5434 bs->iostatus_enabled = true;
5435 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5436 }
5437
5438 /* The I/O status is only enabled if the drive explicitly
5439 * enables it _and_ the VM is configured to stop on errors */
5440 bool bdrv_iostatus_is_enabled(const BlockDriverState *bs)
5441 {
5442 return (bs->iostatus_enabled &&
5443 (bs->on_write_error == BLOCKDEV_ON_ERROR_ENOSPC ||
5444 bs->on_write_error == BLOCKDEV_ON_ERROR_STOP ||
5445 bs->on_read_error == BLOCKDEV_ON_ERROR_STOP));
5446 }
5447
5448 void bdrv_iostatus_disable(BlockDriverState *bs)
5449 {
5450 bs->iostatus_enabled = false;
5451 }
5452
5453 void bdrv_iostatus_reset(BlockDriverState *bs)
5454 {
5455 if (bdrv_iostatus_is_enabled(bs)) {
5456 bs->iostatus = BLOCK_DEVICE_IO_STATUS_OK;
5457 if (bs->job) {
5458 block_job_iostatus_reset(bs->job);
5459 }
5460 }
5461 }
5462
5463 void bdrv_iostatus_set_err(BlockDriverState *bs, int error)
5464 {
5465 assert(bdrv_iostatus_is_enabled(bs));
5466 if (bs->iostatus == BLOCK_DEVICE_IO_STATUS_OK) {
5467 bs->iostatus = error == ENOSPC ? BLOCK_DEVICE_IO_STATUS_NOSPACE :
5468 BLOCK_DEVICE_IO_STATUS_FAILED;
5469 }
5470 }
5471
5472 void
5473 bdrv_acct_start(BlockDriverState *bs, BlockAcctCookie *cookie, int64_t bytes,
5474 enum BlockAcctType type)
5475 {
5476 assert(type < BDRV_MAX_IOTYPE);
5477
5478 cookie->bytes = bytes;
5479 cookie->start_time_ns = get_clock();
5480 cookie->type = type;
5481 }
5482
5483 void
5484 bdrv_acct_done(BlockDriverState *bs, BlockAcctCookie *cookie)
5485 {
5486 assert(cookie->type < BDRV_MAX_IOTYPE);
5487
5488 bs->nr_bytes[cookie->type] += cookie->bytes;
5489 bs->nr_ops[cookie->type]++;
5490 bs->total_time_ns[cookie->type] += get_clock() - cookie->start_time_ns;
5491 }
5492
5493 void bdrv_img_create(const char *filename, const char *fmt,
5494 const char *base_filename, const char *base_fmt,
5495 char *options, uint64_t img_size, int flags,
5496 Error **errp, bool quiet)
5497 {
5498 QemuOptsList *create_opts = NULL;
5499 QemuOpts *opts = NULL;
5500 const char *backing_fmt, *backing_file;
5501 int64_t size;
5502 BlockDriver *drv, *proto_drv;
5503 BlockDriver *backing_drv = NULL;
5504 Error *local_err = NULL;
5505 int ret = 0;
5506
5507 /* Find driver and parse its options */
5508 drv = bdrv_find_format(fmt);
5509 if (!drv) {
5510 error_setg(errp, "Unknown file format '%s'", fmt);
5511 return;
5512 }
5513
5514 proto_drv = bdrv_find_protocol(filename, true);
5515 if (!proto_drv) {
5516 error_setg(errp, "Unknown protocol '%s'", filename);
5517 return;
5518 }
5519
5520 create_opts = qemu_opts_append(create_opts, drv->create_opts);
5521 create_opts = qemu_opts_append(create_opts, proto_drv->create_opts);
5522
5523 /* Create parameter list with default values */
5524 opts = qemu_opts_create(create_opts, NULL, 0, &error_abort);
5525 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, img_size);
5526
5527 /* Parse -o options */
5528 if (options) {
5529 if (qemu_opts_do_parse(opts, options, NULL) != 0) {
5530 error_setg(errp, "Invalid options for file format '%s'", fmt);
5531 goto out;
5532 }
5533 }
5534
5535 if (base_filename) {
5536 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FILE, base_filename)) {
5537 error_setg(errp, "Backing file not supported for file format '%s'",
5538 fmt);
5539 goto out;
5540 }
5541 }
5542
5543 if (base_fmt) {
5544 if (qemu_opt_set(opts, BLOCK_OPT_BACKING_FMT, base_fmt)) {
5545 error_setg(errp, "Backing file format not supported for file "
5546 "format '%s'", fmt);
5547 goto out;
5548 }
5549 }
5550
5551 backing_file = qemu_opt_get(opts, BLOCK_OPT_BACKING_FILE);
5552 if (backing_file) {
5553 if (!strcmp(filename, backing_file)) {
5554 error_setg(errp, "Error: Trying to create an image with the "
5555 "same filename as the backing file");
5556 goto out;
5557 }
5558 }
5559
5560 backing_fmt = qemu_opt_get(opts, BLOCK_OPT_BACKING_FMT);
5561 if (backing_fmt) {
5562 backing_drv = bdrv_find_format(backing_fmt);
5563 if (!backing_drv) {
5564 error_setg(errp, "Unknown backing file format '%s'",
5565 backing_fmt);
5566 goto out;
5567 }
5568 }
5569
5570 // The size for the image must always be specified, with one exception:
5571 // If we are using a backing file, we can obtain the size from there
5572 size = qemu_opt_get_size(opts, BLOCK_OPT_SIZE, 0);
5573 if (size == -1) {
5574 if (backing_file) {
5575 BlockDriverState *bs;
5576 uint64_t size;
5577 int back_flags;
5578
5579 /* backing files always opened read-only */
5580 back_flags =
5581 flags & ~(BDRV_O_RDWR | BDRV_O_SNAPSHOT | BDRV_O_NO_BACKING);
5582
5583 bs = NULL;
5584 ret = bdrv_open(&bs, backing_file, NULL, NULL, back_flags,
5585 backing_drv, &local_err);
5586 if (ret < 0) {
5587 error_setg_errno(errp, -ret, "Could not open '%s': %s",
5588 backing_file,
5589 error_get_pretty(local_err));
5590 error_free(local_err);
5591 local_err = NULL;
5592 goto out;
5593 }
5594 bdrv_get_geometry(bs, &size);
5595 size *= 512;
5596
5597 qemu_opt_set_number(opts, BLOCK_OPT_SIZE, size);
5598
5599 bdrv_unref(bs);
5600 } else {
5601 error_setg(errp, "Image creation needs a size parameter");
5602 goto out;
5603 }
5604 }
5605
5606 if (!quiet) {
5607 printf("Formatting '%s', fmt=%s ", filename, fmt);
5608 qemu_opts_print(opts);
5609 puts("");
5610 }
5611
5612 ret = bdrv_create(drv, filename, opts, &local_err);
5613
5614 if (ret == -EFBIG) {
5615 /* This is generally a better message than whatever the driver would
5616 * deliver (especially because of the cluster_size_hint), since that
5617 * is most probably not much different from "image too large". */
5618 const char *cluster_size_hint = "";
5619 if (qemu_opt_get_size(opts, BLOCK_OPT_CLUSTER_SIZE, 0)) {
5620 cluster_size_hint = " (try using a larger cluster size)";
5621 }
5622 error_setg(errp, "The image size is too large for file format '%s'"
5623 "%s", fmt, cluster_size_hint);
5624 error_free(local_err);
5625 local_err = NULL;
5626 }
5627
5628 out:
5629 qemu_opts_del(opts);
5630 qemu_opts_free(create_opts);
5631 if (local_err) {
5632 error_propagate(errp, local_err);
5633 }
5634 }
5635
5636 AioContext *bdrv_get_aio_context(BlockDriverState *bs)
5637 {
5638 return bs->aio_context;
5639 }
5640
5641 void bdrv_detach_aio_context(BlockDriverState *bs)
5642 {
5643 if (!bs->drv) {
5644 return;
5645 }
5646
5647 if (bs->io_limits_enabled) {
5648 throttle_detach_aio_context(&bs->throttle_state);
5649 }
5650 if (bs->drv->bdrv_detach_aio_context) {
5651 bs->drv->bdrv_detach_aio_context(bs);
5652 }
5653 if (bs->file) {
5654 bdrv_detach_aio_context(bs->file);
5655 }
5656 if (bs->backing_hd) {
5657 bdrv_detach_aio_context(bs->backing_hd);
5658 }
5659
5660 bs->aio_context = NULL;
5661 }
5662
5663 void bdrv_attach_aio_context(BlockDriverState *bs,
5664 AioContext *new_context)
5665 {
5666 if (!bs->drv) {
5667 return;
5668 }
5669
5670 bs->aio_context = new_context;
5671
5672 if (bs->backing_hd) {
5673 bdrv_attach_aio_context(bs->backing_hd, new_context);
5674 }
5675 if (bs->file) {
5676 bdrv_attach_aio_context(bs->file, new_context);
5677 }
5678 if (bs->drv->bdrv_attach_aio_context) {
5679 bs->drv->bdrv_attach_aio_context(bs, new_context);
5680 }
5681 if (bs->io_limits_enabled) {
5682 throttle_attach_aio_context(&bs->throttle_state, new_context);
5683 }
5684 }
5685
5686 void bdrv_set_aio_context(BlockDriverState *bs, AioContext *new_context)
5687 {
5688 bdrv_drain_all(); /* ensure there are no in-flight requests */
5689
5690 bdrv_detach_aio_context(bs);
5691
5692 /* This function executes in the old AioContext so acquire the new one in
5693 * case it runs in a different thread.
5694 */
5695 aio_context_acquire(new_context);
5696 bdrv_attach_aio_context(bs, new_context);
5697 aio_context_release(new_context);
5698 }
5699
5700 void bdrv_add_before_write_notifier(BlockDriverState *bs,
5701 NotifierWithReturn *notifier)
5702 {
5703 notifier_with_return_list_add(&bs->before_write_notifiers, notifier);
5704 }
5705
5706 int bdrv_amend_options(BlockDriverState *bs, QemuOpts *opts)
5707 {
5708 if (!bs->drv->bdrv_amend_options) {
5709 return -ENOTSUP;
5710 }
5711 return bs->drv->bdrv_amend_options(bs, opts);
5712 }
5713
5714 /* This function will be called by the bdrv_recurse_is_first_non_filter method
5715 * of block filter and by bdrv_is_first_non_filter.
5716 * It is used to test if the given bs is the candidate or recurse more in the
5717 * node graph.
5718 */
5719 bool bdrv_recurse_is_first_non_filter(BlockDriverState *bs,
5720 BlockDriverState *candidate)
5721 {
5722 /* return false if basic checks fails */
5723 if (!bs || !bs->drv) {
5724 return false;
5725 }
5726
5727 /* the code reached a non block filter driver -> check if the bs is
5728 * the same as the candidate. It's the recursion termination condition.
5729 */
5730 if (!bs->drv->is_filter) {
5731 return bs == candidate;
5732 }
5733 /* Down this path the driver is a block filter driver */
5734
5735 /* If the block filter recursion method is defined use it to recurse down
5736 * the node graph.
5737 */
5738 if (bs->drv->bdrv_recurse_is_first_non_filter) {
5739 return bs->drv->bdrv_recurse_is_first_non_filter(bs, candidate);
5740 }
5741
5742 /* the driver is a block filter but don't allow to recurse -> return false
5743 */
5744 return false;
5745 }
5746
5747 /* This function checks if the candidate is the first non filter bs down it's
5748 * bs chain. Since we don't have pointers to parents it explore all bs chains
5749 * from the top. Some filters can choose not to pass down the recursion.
5750 */
5751 bool bdrv_is_first_non_filter(BlockDriverState *candidate)
5752 {
5753 BlockDriverState *bs;
5754
5755 /* walk down the bs forest recursively */
5756 QTAILQ_FOREACH(bs, &bdrv_states, device_list) {
5757 bool perm;
5758
5759 /* try to recurse in this top level bs */
5760 perm = bdrv_recurse_is_first_non_filter(bs, candidate);
5761
5762 /* candidate is the first non filter */
5763 if (perm) {
5764 return true;
5765 }
5766 }
5767
5768 return false;
5769 }
5770
5771 BlockDriverState *check_to_replace_node(const char *node_name, Error **errp)
5772 {
5773 BlockDriverState *to_replace_bs = bdrv_find_node(node_name);
5774 if (!to_replace_bs) {
5775 error_setg(errp, "Node name '%s' not found", node_name);
5776 return NULL;
5777 }
5778
5779 if (bdrv_op_is_blocked(to_replace_bs, BLOCK_OP_TYPE_REPLACE, errp)) {
5780 return NULL;
5781 }
5782
5783 /* We don't want arbitrary node of the BDS chain to be replaced only the top
5784 * most non filter in order to prevent data corruption.
5785 * Another benefit is that this tests exclude backing files which are
5786 * blocked by the backing blockers.
5787 */
5788 if (!bdrv_is_first_non_filter(to_replace_bs)) {
5789 error_setg(errp, "Only top most non filter can be replaced");
5790 return NULL;
5791 }
5792
5793 return to_replace_bs;
5794 }