3 # qemu configure script (c) 2003 Fabrice Bellard
6 # Temporary directory used for files created while
7 # configure runs. Since it is in the build directory
8 # we can safely blow away any previous version of it
9 # (and we need not jump through hoops to try to delete
10 # it when configure exits.)
15 echo "ERROR: failed to create temporary directory"
20 TMPC
="${TMPDIR1}/${TMPB}.c"
21 TMPO
="${TMPDIR1}/${TMPB}.o"
22 TMPCXX
="${TMPDIR1}/${TMPB}.cxx"
23 TMPL
="${TMPDIR1}/${TMPB}.lo"
24 TMPA
="${TMPDIR1}/lib${TMPB}.la"
25 TMPE
="${TMPDIR1}/${TMPB}.exe"
29 # Print a helpful header at the top of config.log
30 echo "# QEMU configure log $(date)" >> config.log
31 printf "# Configured with:" >> config.log
32 printf " '%s'" "$0" "$@" >> config.log
34 echo "#" >> config.log
39 while test -n "$2"; do
48 # Run the compiler, capturing its output to the log. First argument
49 # is compiler binary to execute.
52 echo $compiler "$@" >> config.log
53 $compiler "$@" >> config.log
2>&1 ||
return $?
54 # Test passed. If this is an --enable-werror build, rerun
55 # the test with -Werror and bail out if it fails. This
56 # makes warning-generating-errors in configure test code
57 # obvious to developers.
58 if test "$werror" != "yes"; then
61 # Don't bother rerunning the compile if we were already using -Werror
67 echo $compiler -Werror "$@" >> config.log
68 $compiler -Werror "$@" >> config.log
2>&1 && return $?
69 error_exit
"configure test passed without -Werror but failed with -Werror." \
70 "This is probably a bug in the configure script. The failing command" \
71 "will be at the bottom of config.log." \
72 "You can run configure with --disable-werror to bypass this check."
76 do_compiler
"$cc" "$@"
80 do_compiler
"$cxx" "$@"
84 # Set QEMU_CXXFLAGS from QEMU_CFLAGS by filtering out those
85 # options which some versions of GCC's C++ compiler complain about
86 # because they only make sense for C programs.
88 for arg
in $QEMU_CFLAGS; do
90 -Wstrict-prototypes|
-Wmissing-prototypes|
-Wnested-externs|\
91 -Wold-style-declaration|
-Wold-style-definition|
-Wredundant-decls)
94 QEMU_CXXFLAGS
=${QEMU_CXXFLAGS:+$QEMU_CXXFLAGS }$arg
101 do_cc
$QEMU_CFLAGS -c -o $TMPO $TMPC
107 do_cc
$QEMU_CFLAGS $local_cflags -o $TMPE $TMPC $LDFLAGS $local_ldflags
113 # Run the compiler, capturing its output to the log.
114 echo $libtool $mode --tag=CC
$cc "$@" >> config.log
115 $libtool $mode --tag=CC
$cc "$@" >> config.log
2>&1 ||
return $?
116 # Test passed. If this is an --enable-werror build, rerun
117 # the test with -Werror and bail out if it fails. This
118 # makes warning-generating-errors in configure test code
119 # obvious to developers.
120 if test "$werror" != "yes"; then
123 # Don't bother rerunning the compile if we were already using -Werror
129 echo $libtool $mode --tag=CC
$cc -Werror "$@" >> config.log
130 $libtool $mode --tag=CC
$cc -Werror "$@" >> config.log
2>&1 && return $?
131 error_exit
"configure test passed without -Werror but failed with -Werror." \
132 "This is probably a bug in the configure script. The failing command" \
133 "will be at the bottom of config.log." \
134 "You can run configure with --disable-werror to bypass this check."
138 do_libtool
--mode=compile
$QEMU_CFLAGS -c -fPIE -DPIE -o $TMPO $TMPC ||
return $?
139 do_libtool
--mode=link
$LDFLAGS -o $TMPA $TMPL -rpath /usr
/local
/lib
142 # symbolically link $1 to $2. Portable version of "ln -sf".
145 mkdir
-p "$(dirname "$2")"
149 # check whether a command is available to this shell (may be either an
150 # executable or a builtin)
152 type "$1" >/dev
/null
2>&1
155 # search for an executable in PATH
161 # pathname has a dir component?
162 if [ "${local_command#*/}" != "$local_command" ]; then
163 if [ -x "$local_command" ] && [ ! -d "$local_command" ]; then
164 echo "$local_command"
168 if [ -z "$local_command" ]; then
173 for local_dir
in $PATH; do
174 if [ -x "$local_dir/$local_command" ] && [ ! -d "$local_dir/$local_command" ]; then
175 echo "$local_dir/$local_command"
176 IFS
="${local_ifs:-$(printf ' \t\n')}"
181 IFS
="${local_ifs:-$(printf ' \t\n')}"
186 echo "$trace_backends" |
grep "$1" >/dev
/null
190 source_path
=`dirname "$0"`
193 interp_prefix
="/usr/gnemul/qemu-%M"
197 block_drv_rw_whitelist
=""
198 block_drv_ro_whitelist
=""
204 cc_i386
=i386-pc-linux-gnu-gcc
209 # Don't accept a target_list environment variable.
212 # Default value for a variable defining feature "foo".
213 # * foo="no" feature will only be used if --enable-foo arg is given
214 # * foo="" feature will be searched for, and if found, will be used
215 # unless --disable-foo is given
216 # * foo="yes" this value will only be set by --enable-foo flag.
217 # feature will searched for,
218 # if not found, configure exits with error
220 # Always add --enable-foo and --disable-foo command line args.
221 # Distributions want to ensure that several features are compiled in, and it
222 # is impossible without a --enable-foo that exits if a feature is not found.
246 xen_pci_passthrough
=""
268 LDFLAGS_SHARED
="-shared"
271 mandir
="\${prefix}/share/man"
272 datadir
="\${prefix}/share"
273 qemu_docdir
="\${prefix}/share/doc/qemu"
274 bindir
="\${prefix}/bin"
275 libdir
="\${prefix}/lib"
276 libexecdir
="\${prefix}/libexec"
277 includedir
="\${prefix}/include"
278 sysconfdir
="\${prefix}/etc"
279 local_statedir
="\${prefix}/var"
312 guest_agent_with_vss
="no"
322 glusterfs_discard
="no"
323 glusterfs_zerofill
="no"
324 virtio_blk_data_plane
=""
333 # parse CC options first
335 optarg
=`expr "x$opt" : 'x[^=]*=\(.*\)'`
337 --cross-prefix=*) cross_prefix
="$optarg"
341 --cxx=*) CXX
="$optarg"
343 --source-path=*) source_path
="$optarg"
345 --cpu=*) cpu
="$optarg"
347 --extra-cflags=*) QEMU_CFLAGS
="$optarg $QEMU_CFLAGS"
348 EXTRA_CFLAGS
="$optarg"
350 --extra-ldflags=*) LDFLAGS
="$optarg $LDFLAGS"
351 EXTRA_LDFLAGS
="$optarg"
353 --enable-debug-info) debug_info
="yes"
355 --disable-debug-info) debug_info
="no"
360 # Using uname is really, really broken. Once we have the right set of checks
361 # we can eliminate its usage altogether.
363 # Preferred compiler:
365 # ${cross_prefix}gcc (if cross-prefix specified)
367 if test -z "${CC}${cross_prefix}"; then
370 cc
="${CC-${cross_prefix}gcc}"
373 if test -z "${CXX}${cross_prefix}"; then
376 cxx
="${CXX-${cross_prefix}g++}"
379 ar="${AR-${cross_prefix}ar}"
380 as
="${AS-${cross_prefix}as}"
382 objcopy
="${OBJCOPY-${cross_prefix}objcopy}"
383 ld
="${LD-${cross_prefix}ld}"
384 libtool
="${LIBTOOL-${cross_prefix}libtool}"
385 strip
="${STRIP-${cross_prefix}strip}"
386 windres
="${WINDRES-${cross_prefix}windres}"
387 pkg_config_exe
="${PKG_CONFIG-${cross_prefix}pkg-config}"
389 "${pkg_config_exe}" ${QEMU_PKG_CONFIG_FLAGS} "$@"
391 pkg_config
=query_pkg_config
392 sdl_config
="${SDL_CONFIG-${cross_prefix}sdl-config}"
393 sdl2_config
="${SDL2_CONFIG-${cross_prefix}sdl2-config}"
395 # If the user hasn't specified ARFLAGS, default to 'rv', just as make does.
396 ARFLAGS
="${ARFLAGS-rv}"
398 # default flags for all hosts
399 QEMU_CFLAGS
="-fno-strict-aliasing -fno-common $QEMU_CFLAGS"
400 QEMU_CFLAGS
="-Wall -Wundef -Wwrite-strings -Wmissing-prototypes $QEMU_CFLAGS"
401 QEMU_CFLAGS
="-Wstrict-prototypes -Wredundant-decls $QEMU_CFLAGS"
402 QEMU_CFLAGS
="-D_GNU_SOURCE -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE $QEMU_CFLAGS"
403 QEMU_INCLUDES
="-I. -I\$(SRC_PATH) -I\$(SRC_PATH)/include"
404 if test "$debug_info" = "yes"; then
406 LDFLAGS
="-g $LDFLAGS"
409 # make source path absolute
410 source_path
=`cd "$source_path"; pwd`
412 # running configure in the source tree?
413 # we know that's the case if configure is there.
414 if test -f "./configure"; then
415 pwd_is_source_path
="y"
417 pwd_is_source_path
="n"
423 #error $1 not defined
425 int main(void) { return 0; }
430 if check_define __linux__
; then
432 elif check_define _WIN32
; then
434 elif check_define __OpenBSD__
; then
436 elif check_define __sun__
; then
438 elif check_define __HAIKU__
; then
444 # Some host OSes need non-standard checks for which CPU to use.
445 # Note that these checks are broken for cross-compilation: if you're
446 # cross-compiling to one of these OSes then you'll need to specify
447 # the correct CPU with the --cpu option.
450 # on Leopard most of the system is 32-bit, so we have to ask the kernel if we can
451 # run 64-bit userspace code.
452 # If the user didn't specify a CPU explicitly and the kernel says this is
453 # 64 bit hw, then assume x86_64. Otherwise fall through to the usual detection code.
454 if test -z "$cpu" && test "$(sysctl -n hw.optional.x86_64)" = "1"; then
459 # `uname -m` returns i86pc even on an x86_64 box, so default based on isainfo
460 if test -z "$cpu" && test "$(isainfo -k)" = "amd64"; then
465 if test ! -z "$cpu" ; then
466 # command line argument
468 elif check_define __i386__
; then
470 elif check_define __x86_64__
; then
471 if check_define __ILP32__
; then
476 elif check_define __sparc__
; then
477 if check_define __arch64__
; then
482 elif check_define _ARCH_PPC
; then
483 if check_define _ARCH_PPC64
; then
488 elif check_define __mips__
; then
490 elif check_define __ia64__
; then
492 elif check_define __s390__
; then
493 if check_define __s390x__
; then
498 elif check_define __arm__
; then
500 elif check_define __aarch64__
; then
502 elif check_define __hppa__
; then
509 # Normalise host CPU name and set ARCH.
510 # Note that this case should only have supported host CPUs, not guests.
512 ia64|ppc|ppc64|s390|s390x|sparc64|x32
)
515 i386|i486|i586|i686|i86pc|BePC
)
534 # This will result in either an error or falling back to TCI later
538 if test -z "$ARCH"; then
547 QEMU_CFLAGS
="-mno-cygwin $QEMU_CFLAGS"
548 audio_possible_drivers
="winwave sdl"
549 audio_drv_list
="winwave"
553 audio_possible_drivers
="winwave dsound sdl fmod"
554 audio_drv_list
="winwave"
559 audio_possible_drivers
="oss sdl esd pa"
565 audio_possible_drivers
="oss sdl esd pa"
566 # needed for kinfo_getvmmap(3) in libutil.h
568 netmap
="" # enable netmap autodetect
574 audio_possible_drivers
="oss sdl esd pa"
580 audio_possible_drivers
="oss sdl esd"
587 audio_possible_drivers
="sdl esd"
592 LDFLAGS_SHARED
="-bundle -undefined dynamic_lookup"
593 if [ "$cpu" = "x86_64" ] ; then
594 QEMU_CFLAGS
="-arch x86_64 $QEMU_CFLAGS"
595 LDFLAGS
="-arch x86_64 $LDFLAGS"
598 audio_drv_list
="coreaudio"
599 audio_possible_drivers
="coreaudio sdl fmod"
600 LDFLAGS
="-framework CoreFoundation -framework IOKit $LDFLAGS"
601 libs_softmmu
="-F/System/Library/Frameworks -framework Cocoa -framework IOKit $libs_softmmu"
602 # Disable attempts to use ObjectiveC features in os/object.h since they
603 # won't work when we're compiling with gcc as a C compiler.
604 QEMU_CFLAGS
="-DOS_OBJECT_USE_OBJC=0 $QEMU_CFLAGS"
609 install="${INSTALL-ginstall}"
611 smbd
="${SMBD-/usr/sfw/sbin/smbd}"
612 needs_libsunmath
="no"
613 solarisrev
=`uname -r | cut -f2 -d.`
614 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" ] ; then
615 if test "$solarisrev" -le 9 ; then
616 if test -f /opt
/SUNWspro
/prod
/lib
/libsunmath.so
.1; then
617 needs_libsunmath
="yes"
618 QEMU_CFLAGS
="-I/opt/SUNWspro/prod/include/cc $QEMU_CFLAGS"
619 LDFLAGS
="-L/opt/SUNWspro/prod/lib -R/opt/SUNWspro/prod/lib $LDFLAGS"
620 LIBS
="-lsunmath $LIBS"
622 error_exit
"QEMU will not link correctly on Solaris 8/X86 or 9/x86 without" \
623 "libsunmath from the Sun Studio compilers tools, due to a lack of" \
624 "C99 math features in libm.so in Solaris 8/x86 and Solaris 9/x86" \
625 "Studio 11 can be downloaded from www.sun.com."
629 if test -f /usr
/include
/sys
/soundcard.h
; then
632 audio_possible_drivers
="oss sdl"
633 # needed for CMSG_ macros in sys/socket.h
634 QEMU_CFLAGS
="-D_XOPEN_SOURCE=600 $QEMU_CFLAGS"
635 # needed for TIOCWIN* defines in termios.h
636 QEMU_CFLAGS
="-D__EXTENSIONS__ $QEMU_CFLAGS"
637 QEMU_CFLAGS
="-std=gnu99 $QEMU_CFLAGS"
638 solarisnetlibs
="-lsocket -lnsl -lresolv"
639 LIBS
="$solarisnetlibs $LIBS"
640 libs_qga
="$solarisnetlibs $libs_qga"
648 QEMU_CFLAGS
="-DB_USE_POSITIVE_POSIX_ERRORS $QEMU_CFLAGS"
649 LIBS
="-lposix_error_mapper -lnetwork $LIBS"
653 audio_possible_drivers
="oss alsa sdl esd pa"
659 if [ "$cpu" = "i386" -o "$cpu" = "x86_64" -o "$cpu" = "x32" ] ; then
660 audio_possible_drivers
="$audio_possible_drivers fmod"
662 QEMU_INCLUDES
="-I\$(SRC_PATH)/linux-headers -I$(pwd)/linux-headers $QEMU_INCLUDES"
666 if [ "$bsd" = "yes" ] ; then
667 if [ "$darwin" != "yes" ] ; then
672 : ${make=${MAKE-make}}
673 : ${install=${INSTALL-install}}
674 : ${python=${PYTHON-python}}
675 : ${smbd=${SMBD-/usr/sbin/smbd}}
677 # Default objcc to clang if available, otherwise use CC
684 if test "$mingw32" = "yes" ; then
687 QEMU_CFLAGS
="-DWIN32_LEAN_AND_MEAN -DWINVER=0x501 $QEMU_CFLAGS"
688 # enable C99/POSIX format strings (needs mingw32-runtime 3.15 or later)
689 QEMU_CFLAGS
="-D__USE_MINGW_ANSI_STDIO=1 $QEMU_CFLAGS"
690 LIBS
="-lwinmm -lws2_32 -liphlpapi $LIBS"
692 int main(void) { return 0; }
694 if compile_prog
"" "-liberty" ; then
695 LIBS
="-liberty $LIBS"
697 prefix
="c:/Program Files/QEMU"
700 qemu_docdir
="\${prefix}"
702 sysconfdir
="\${prefix}"
705 libs_qga
="-lws2_32 -lwinmm -lpowrprof $libs_qga"
711 optarg
=`expr "x$opt" : 'x[^=]*=\(.*\)'`
713 --help|
-h) show_help
=yes
715 --version|
-V) exec cat $source_path/VERSION
717 --prefix=*) prefix
="$optarg"
719 --interp-prefix=*) interp_prefix
="$optarg"
727 --host-cc=*) host_cc
="$optarg"
731 --iasl=*) iasl
="$optarg"
733 --objcc=*) objcc
="$optarg"
735 --make=*) make="$optarg"
737 --install=*) install="$optarg"
739 --python=*) python
="$optarg"
741 --gcov=*) gcov_tool
="$optarg"
743 --smbd=*) smbd
="$optarg"
751 --disable-debug-info)
758 --target-list=*) target_list
="$optarg"
760 --enable-trace-backends=*) trace_backends
="$optarg"
762 # XXX: backwards compatibility
763 --enable-trace-backend=*) trace_backends
="$optarg"
765 --with-trace-file=*) trace_file
="$optarg"
767 --enable-gprof) gprof
="yes"
769 --enable-gcov) gcov
="yes"
773 LDFLAGS
="-static $LDFLAGS"
774 QEMU_PKG_CONFIG_FLAGS
="--static $QEMU_PKG_CONFIG_FLAGS"
776 --mandir=*) mandir
="$optarg"
778 --bindir=*) bindir
="$optarg"
780 --libdir=*) libdir
="$optarg"
782 --libexecdir=*) libexecdir
="$optarg"
784 --includedir=*) includedir
="$optarg"
786 --datadir=*) datadir
="$optarg"
788 --with-confsuffix=*) confsuffix
="$optarg"
790 --docdir=*) qemu_docdir
="$optarg"
792 --sysconfdir=*) sysconfdir
="$optarg"
794 --localstatedir=*) local_statedir
="$optarg"
796 --sbindir=*|
--sharedstatedir=*|\
797 --oldincludedir=*|
--datarootdir=*|
--infodir=*|
--localedir=*|\
798 --htmldir=*|
--dvidir=*|
--pdfdir=*|
--psdir=*)
799 # These switches are silently ignored, for compatibility with
800 # autoconf-generated configure scripts. This allows QEMU's
801 # configure to be used by RPM and similar macros that set
802 # lots of directory switches by default.
804 --with-system-pixman) pixman
="system"
806 --without-system-pixman) pixman
="internal"
808 --without-pixman) pixman
="none"
810 --disable-sdl) sdl
="no"
812 --enable-sdl) sdl
="yes"
814 --with-sdlabi=*) sdlabi
="$optarg"
816 --disable-qom-cast-debug) qom_cast_debug
="no"
818 --enable-qom-cast-debug) qom_cast_debug
="yes"
820 --disable-virtfs) virtfs
="no"
822 --enable-virtfs) virtfs
="yes"
824 --disable-vnc) vnc
="no"
826 --enable-vnc) vnc
="yes"
828 --fmod-lib=*) fmod_lib
="$optarg"
830 --fmod-inc=*) fmod_inc
="$optarg"
832 --oss-lib=*) oss_lib
="$optarg"
834 --audio-drv-list=*) audio_drv_list
="$optarg"
836 --block-drv-rw-whitelist=*|
--block-drv-whitelist=*) block_drv_rw_whitelist
=`echo "$optarg" | sed -e 's/,/ /g'`
838 --block-drv-ro-whitelist=*) block_drv_ro_whitelist
=`echo "$optarg" | sed -e 's/,/ /g'`
840 --enable-debug-tcg) debug_tcg
="yes"
842 --disable-debug-tcg) debug_tcg
="no"
845 # Enable debugging options that aren't excessively noisy
850 --enable-sparse) sparse
="yes"
852 --disable-sparse) sparse
="no"
854 --disable-strip) strip_opt
="no"
856 --disable-vnc-tls) vnc_tls
="no"
858 --enable-vnc-tls) vnc_tls
="yes"
860 --disable-vnc-sasl) vnc_sasl
="no"
862 --enable-vnc-sasl) vnc_sasl
="yes"
864 --disable-vnc-jpeg) vnc_jpeg
="no"
866 --enable-vnc-jpeg) vnc_jpeg
="yes"
868 --disable-vnc-png) vnc_png
="no"
870 --enable-vnc-png) vnc_png
="yes"
872 --disable-vnc-ws) vnc_ws
="no"
874 --enable-vnc-ws) vnc_ws
="yes"
876 --disable-slirp) slirp
="no"
878 --disable-uuid) uuid
="no"
880 --enable-uuid) uuid
="yes"
882 --disable-vde) vde
="no"
884 --enable-vde) vde
="yes"
886 --disable-netmap) netmap
="no"
888 --enable-netmap) netmap
="yes"
890 --disable-xen) xen
="no"
892 --enable-xen) xen
="yes"
894 --disable-xen-pci-passthrough) xen_pci_passthrough
="no"
896 --enable-xen-pci-passthrough) xen_pci_passthrough
="yes"
898 --disable-brlapi) brlapi
="no"
900 --enable-brlapi) brlapi
="yes"
902 --disable-bluez) bluez
="no"
904 --enable-bluez) bluez
="yes"
906 --disable-kvm) kvm
="no"
908 --enable-kvm) kvm
="yes"
910 --disable-tcg-interpreter) tcg_interpreter
="no"
912 --enable-tcg-interpreter) tcg_interpreter
="yes"
914 --disable-cap-ng) cap_ng
="no"
916 --enable-cap-ng) cap_ng
="yes"
918 --disable-spice) spice
="no"
920 --enable-spice) spice
="yes"
922 --disable-libiscsi) libiscsi
="no"
924 --enable-libiscsi) libiscsi
="yes"
926 --disable-libnfs) libnfs
="no"
928 --enable-libnfs) libnfs
="yes"
930 --enable-profiler) profiler
="yes"
932 --disable-cocoa) cocoa
="no"
937 audio_drv_list
="coreaudio `echo $audio_drv_list | sed s,coreaudio,,g`"
939 --disable-system) softmmu
="no"
941 --enable-system) softmmu
="yes"
948 --disable-linux-user) linux_user
="no"
950 --enable-linux-user) linux_user
="yes"
952 --disable-bsd-user) bsd_user
="no"
954 --enable-bsd-user) bsd_user
="yes"
956 --enable-guest-base) guest_base
="yes"
958 --disable-guest-base) guest_base
="no"
960 --enable-pie) pie
="yes"
962 --disable-pie) pie
="no"
964 --enable-werror) werror
="yes"
966 --disable-werror) werror
="no"
968 --enable-stack-protector) stack_protector
="yes"
970 --disable-stack-protector) stack_protector
="no"
972 --disable-curses) curses
="no"
974 --enable-curses) curses
="yes"
976 --disable-curl) curl
="no"
978 --enable-curl) curl
="yes"
980 --disable-fdt) fdt
="no"
982 --enable-fdt) fdt
="yes"
984 --disable-linux-aio) linux_aio
="no"
986 --enable-linux-aio) linux_aio
="yes"
988 --disable-attr) attr
="no"
990 --enable-attr) attr
="yes"
992 --disable-blobs) blobs
="no"
994 --with-pkgversion=*) pkgversion
=" ($optarg)"
996 --with-coroutine=*) coroutine
="$optarg"
998 --disable-coroutine-pool) coroutine_pool
="no"
1000 --enable-coroutine-pool) coroutine_pool
="yes"
1002 --disable-docs) docs
="no"
1004 --enable-docs) docs
="yes"
1006 --disable-vhost-net) vhost_net
="no"
1008 --enable-vhost-net) vhost_net
="yes"
1010 --disable-vhost-scsi) vhost_scsi
="no"
1012 --enable-vhost-scsi) vhost_scsi
="yes"
1014 --disable-glx) glx
="no"
1016 --enable-glx) glx
="yes"
1018 --disable-rbd) rbd
="no"
1020 --enable-rbd) rbd
="yes"
1022 --disable-xfsctl) xfs
="no"
1024 --enable-xfsctl) xfs
="yes"
1026 --disable-smartcard-nss) smartcard_nss
="no"
1028 --enable-smartcard-nss) smartcard_nss
="yes"
1030 --disable-libusb) libusb
="no"
1032 --enable-libusb) libusb
="yes"
1034 --disable-usb-redir) usb_redir
="no"
1036 --enable-usb-redir) usb_redir
="yes"
1038 --disable-zlib-test) zlib
="no"
1040 --enable-lzo) lzo
="yes"
1042 --enable-snappy) snappy
="yes"
1044 --enable-guest-agent) guest_agent
="yes"
1046 --disable-guest-agent) guest_agent
="no"
1048 --with-vss-sdk) vss_win32_sdk
=""
1050 --with-vss-sdk=*) vss_win32_sdk
="$optarg"
1052 --without-vss-sdk) vss_win32_sdk
="no"
1054 --with-win-sdk) win_sdk
=""
1056 --with-win-sdk=*) win_sdk
="$optarg"
1058 --without-win-sdk) win_sdk
="no"
1060 --enable-tools) want_tools
="yes"
1062 --disable-tools) want_tools
="no"
1064 --enable-seccomp) seccomp
="yes"
1066 --disable-seccomp) seccomp
="no"
1068 --disable-glusterfs) glusterfs
="no"
1070 --enable-glusterfs) glusterfs
="yes"
1072 --disable-virtio-blk-data-plane) virtio_blk_data_plane
="no"
1074 --enable-virtio-blk-data-plane) virtio_blk_data_plane
="yes"
1076 --disable-gtk) gtk
="no"
1078 --enable-gtk) gtk
="yes"
1080 --enable-rdma) rdma
="yes"
1082 --disable-rdma) rdma
="no"
1084 --with-gtkabi=*) gtkabi
="$optarg"
1086 --disable-vte) vte
="no"
1088 --enable-vte) vte
="yes"
1090 --enable-tpm) tpm
="yes"
1092 --disable-libssh2) libssh2
="no"
1094 --enable-libssh2) libssh2
="yes"
1096 --enable-vhdx) vhdx
="yes"
1098 --disable-vhdx) vhdx
="no"
1100 --disable-quorum) quorum
="no"
1102 --enable-quorum) quorum
="yes"
1105 echo "ERROR: unknown option $opt"
1106 echo "Try '$0 --help' for more information"
1112 if ! has
$python; then
1113 error_exit
"Python not found. Use --python=/path/to/python"
1116 # Note that if the Python conditional here evaluates True we will exit
1117 # with status 1 which is a shell 'false' value.
1118 if ! $python -c 'import sys; sys.exit(sys.version_info < (2,4) or sys.version_info >= (3,))'; then
1119 error_exit
"Cannot use '$python', Python 2.4 or later is required." \
1120 "Note that Python 3 or later is not yet supported." \
1121 "Use --python=/path/to/python to specify a supported Python."
1124 # The -B switch was added in Python 2.6.
1125 # If it is supplied, compiled files are not written.
1126 # Use it for Python versions which support it.
1127 if $python -B -c 'import sys; sys.exit(0)' 2>/dev
/null
; then
1134 LDFLAGS
="-m32 $LDFLAGS"
1138 LDFLAGS
="-m64 $LDFLAGS"
1141 LDFLAGS
="-m32 $LDFLAGS"
1142 CPU_CFLAGS
="-m32 -mcpu=ultrasparc"
1145 LDFLAGS
="-m64 $LDFLAGS"
1146 CPU_CFLAGS
="-m64 -mcpu=ultrasparc"
1150 LDFLAGS
="-m31 $LDFLAGS"
1154 LDFLAGS
="-m64 $LDFLAGS"
1158 LDFLAGS
="-m32 $LDFLAGS"
1159 cc_i386
='$(CC) -m32'
1163 LDFLAGS
="-m64 $LDFLAGS"
1164 cc_i386
='$(CC) -m32'
1168 LDFLAGS
="-mx32 $LDFLAGS"
1169 cc_i386
='$(CC) -m32'
1171 # No special flags required for other host CPUs
1174 QEMU_CFLAGS
="$CPU_CFLAGS $QEMU_CFLAGS"
1175 EXTRA_CFLAGS
="$CPU_CFLAGS $EXTRA_CFLAGS"
1177 default_target_list
=""
1181 if [ "$softmmu" = "yes" ]; then
1182 mak_wilds
="${mak_wilds} $source_path/default-configs/*-softmmu.mak"
1184 if [ "$linux_user" = "yes" ]; then
1185 mak_wilds
="${mak_wilds} $source_path/default-configs/*-linux-user.mak"
1187 if [ "$bsd_user" = "yes" ]; then
1188 mak_wilds
="${mak_wilds} $source_path/default-configs/*-bsd-user.mak"
1191 for config
in $mak_wilds; do
1192 default_target_list
="${default_target_list} $(basename "$config" .mak)"
1195 if test x
"$show_help" = x
"yes" ; then
1198 Usage: configure [options]
1199 Options: [defaults in brackets after descriptions]
1202 --help print this message
1203 --prefix=PREFIX install in PREFIX [$prefix]
1204 --interp-prefix=PREFIX where to find shared libraries, etc.
1205 use %M for cpu name [$interp_prefix]
1206 --target-list=LIST set target list (default: build everything)
1207 $(echo Available targets: $default_target_list | \
1208 fold -s -w 53 | sed -e 's/^/ /')
1210 Advanced options (experts only):
1211 --source-path=PATH path of source code [$source_path]
1212 --cross-prefix=PREFIX use PREFIX for compile tools [$cross_prefix]
1213 --cc=CC use C compiler CC [$cc]
1214 --iasl=IASL use ACPI compiler IASL [$iasl]
1215 --host-cc=CC use C compiler CC [$host_cc] for code run at
1217 --cxx=CXX use C++ compiler CXX [$cxx]
1218 --objcc=OBJCC use Objective-C compiler OBJCC [$objcc]
1219 --extra-cflags=CFLAGS append extra C compiler flags QEMU_CFLAGS
1220 --extra-ldflags=LDFLAGS append extra linker flags LDFLAGS
1221 --make=MAKE use specified make [$make]
1222 --install=INSTALL use specified install [$install]
1223 --python=PYTHON use specified python [$python]
1224 --smbd=SMBD use specified smbd [$smbd]
1225 --static enable static build [$static]
1226 --mandir=PATH install man pages in PATH
1227 --datadir=PATH install firmware in PATH$confsuffix
1228 --docdir=PATH install documentation in PATH$confsuffix
1229 --bindir=PATH install binaries in PATH
1230 --libdir=PATH install libraries in PATH
1231 --sysconfdir=PATH install config in PATH$confsuffix
1232 --localstatedir=PATH install local state in PATH (set at runtime on win32)
1233 --with-confsuffix=SUFFIX suffix for QEMU data inside datadir/libdir/sysconfdir [$confsuffix]
1234 --enable-modules enable modules support
1235 --enable-debug-tcg enable TCG debugging
1236 --disable-debug-tcg disable TCG debugging (default)
1237 --enable-debug-info enable debugging information (default)
1238 --disable-debug-info disable debugging information
1239 --enable-debug enable common debug build options
1240 --enable-sparse enable sparse checker
1241 --disable-sparse disable sparse checker (default)
1242 --disable-strip disable stripping binaries
1243 --disable-werror disable compilation abort on warning
1244 --disable-stack-protector disable compiler-provided stack protection
1245 --disable-sdl disable SDL
1246 --enable-sdl enable SDL
1247 --with-sdlabi select preferred SDL ABI 1.2 or 2.0
1248 --disable-gtk disable gtk UI
1249 --enable-gtk enable gtk UI
1250 --with-gtkabi select preferred GTK ABI 2.0 or 3.0
1251 --disable-virtfs disable VirtFS
1252 --enable-virtfs enable VirtFS
1253 --disable-vnc disable VNC
1254 --enable-vnc enable VNC
1255 --disable-cocoa disable Cocoa (Mac OS X only)
1256 --enable-cocoa enable Cocoa (default on Mac OS X)
1257 --audio-drv-list=LIST set audio drivers list:
1258 Available drivers: $audio_possible_drivers
1259 --block-drv-whitelist=L Same as --block-drv-rw-whitelist=L
1260 --block-drv-rw-whitelist=L
1261 set block driver read-write whitelist
1262 (affects only QEMU, not qemu-img)
1263 --block-drv-ro-whitelist=L
1264 set block driver read-only whitelist
1265 (affects only QEMU, not qemu-img)
1266 --disable-xen disable xen backend driver support
1267 --enable-xen enable xen backend driver support
1268 --disable-xen-pci-passthrough
1269 --enable-xen-pci-passthrough
1270 --disable-brlapi disable BrlAPI
1271 --enable-brlapi enable BrlAPI
1272 --disable-vnc-tls disable TLS encryption for VNC server
1273 --enable-vnc-tls enable TLS encryption for VNC server
1274 --disable-vnc-sasl disable SASL encryption for VNC server
1275 --enable-vnc-sasl enable SASL encryption for VNC server
1276 --disable-vnc-jpeg disable JPEG lossy compression for VNC server
1277 --enable-vnc-jpeg enable JPEG lossy compression for VNC server
1278 --disable-vnc-png disable PNG compression for VNC server (default)
1279 --enable-vnc-png enable PNG compression for VNC server
1280 --disable-vnc-ws disable Websockets support for VNC server
1281 --enable-vnc-ws enable Websockets support for VNC server
1282 --disable-curses disable curses output
1283 --enable-curses enable curses output
1284 --disable-curl disable curl connectivity
1285 --enable-curl enable curl connectivity
1286 --disable-fdt disable fdt device tree
1287 --enable-fdt enable fdt device tree
1288 --disable-bluez disable bluez stack connectivity
1289 --enable-bluez enable bluez stack connectivity
1290 --disable-slirp disable SLIRP userspace network connectivity
1291 --disable-kvm disable KVM acceleration support
1292 --enable-kvm enable KVM acceleration support
1293 --disable-rdma disable RDMA-based migration support
1294 --enable-rdma enable RDMA-based migration support
1295 --enable-tcg-interpreter enable TCG with bytecode interpreter (TCI)
1296 --enable-system enable all system emulation targets
1297 --disable-system disable all system emulation targets
1298 --enable-user enable supported user emulation targets
1299 --disable-user disable all user emulation targets
1300 --enable-linux-user enable all linux usermode emulation targets
1301 --disable-linux-user disable all linux usermode emulation targets
1302 --enable-bsd-user enable all BSD usermode emulation targets
1303 --disable-bsd-user disable all BSD usermode emulation targets
1304 --enable-guest-base enable GUEST_BASE support for usermode
1306 --disable-guest-base disable GUEST_BASE support
1307 --enable-pie build Position Independent Executables
1308 --disable-pie do not build Position Independent Executables
1309 --fmod-lib path to FMOD library
1310 --fmod-inc path to FMOD includes
1311 --oss-lib path to OSS library
1312 --cpu=CPU Build for host CPU [$cpu]
1313 --disable-uuid disable uuid support
1314 --enable-uuid enable uuid support
1315 --disable-vde disable support for vde network
1316 --enable-vde enable support for vde network
1317 --disable-netmap disable support for netmap network
1318 --enable-netmap enable support for netmap network
1319 --disable-linux-aio disable Linux AIO support
1320 --enable-linux-aio enable Linux AIO support
1321 --disable-cap-ng disable libcap-ng support
1322 --enable-cap-ng enable libcap-ng support
1323 --disable-attr disables attr and xattr support
1324 --enable-attr enable attr and xattr support
1325 --disable-blobs disable installing provided firmware blobs
1326 --enable-docs enable documentation build
1327 --disable-docs disable documentation build
1328 --disable-vhost-net disable vhost-net acceleration support
1329 --enable-vhost-net enable vhost-net acceleration support
1330 --enable-trace-backends=B Set trace backend
1331 Available backends: $($python $source_path/scripts/tracetool.py --list-backends)
1332 --with-trace-file=NAME Full PATH,NAME of file to store traces
1334 --disable-spice disable spice
1335 --enable-spice enable spice
1336 --enable-rbd enable building the rados block device (rbd)
1337 --disable-libiscsi disable iscsi support
1338 --enable-libiscsi enable iscsi support
1339 --disable-libnfs disable nfs support
1340 --enable-libnfs enable nfs support
1341 --disable-smartcard-nss disable smartcard nss support
1342 --enable-smartcard-nss enable smartcard nss support
1343 --disable-libusb disable libusb (for usb passthrough)
1344 --enable-libusb enable libusb (for usb passthrough)
1345 --disable-usb-redir disable usb network redirection support
1346 --enable-usb-redir enable usb network redirection support
1347 --enable-lzo enable the support of lzo compression library
1348 --enable-snappy enable the support of snappy compression library
1349 --disable-guest-agent disable building of the QEMU Guest Agent
1350 --enable-guest-agent enable building of the QEMU Guest Agent
1351 --with-vss-sdk=SDK-path enable Windows VSS support in QEMU Guest Agent
1352 --with-win-sdk=SDK-path path to Windows Platform SDK (to build VSS .tlb)
1353 --disable-seccomp disable seccomp support
1354 --enable-seccomp enables seccomp support
1355 --with-coroutine=BACKEND coroutine backend. Supported options:
1356 gthread, ucontext, sigaltstack, windows
1357 --disable-coroutine-pool disable coroutine freelist (worse performance)
1358 --enable-coroutine-pool enable coroutine freelist (better performance)
1359 --enable-glusterfs enable GlusterFS backend
1360 --disable-glusterfs disable GlusterFS backend
1361 --enable-gcov enable test coverage analysis with gcov
1362 --gcov=GCOV use specified gcov [$gcov_tool]
1363 --enable-tpm enable TPM support
1364 --disable-libssh2 disable ssh block device support
1365 --enable-libssh2 enable ssh block device support
1366 --disable-vhdx disables support for the Microsoft VHDX image format
1367 --enable-vhdx enable support for the Microsoft VHDX image format
1368 --disable-quorum disable quorum block filter support
1369 --enable-quorum enable quorum block filter support
1371 NOTE: The object files are built at the place where configure is launched
1376 # Now we have handled --enable-tcg-interpreter and know we're not just
1377 # printing the help message, bail out if the host CPU isn't supported.
1378 if test "$ARCH" = "unknown"; then
1379 if test "$tcg_interpreter" = "yes" ; then
1380 echo "Unsupported CPU = $cpu, will use TCG with TCI (experimental)"
1383 error_exit
"Unsupported CPU = $cpu, try --enable-tcg-interpreter"
1387 # Consult white-list to determine whether to enable werror
1388 # by default. Only enable by default for git builds
1389 z_version
=`cut -f3 -d. $source_path/VERSION`
1391 if test -z "$werror" ; then
1392 if test -d "$source_path/.git" -a \
1393 "$linux" = "yes" ; then
1400 # check that the C compiler works.
1402 int main(void) { return 0; }
1405 if compile_object
; then
1406 : C compiler works ok
1408 error_exit
"\"$cc\" either does not exist or does not work"
1411 # Check that the C++ compiler exists and works with the C compiler
1414 int c_function(void);
1415 int main(void) { return c_function(); }
1422 int c_function(void);
1424 int c_function(void) { return 42; }
1429 if do_cxx
$QEMU_CXXFLAGS -o $TMPE $TMPCXX $TMPO $LDFLAGS; then
1430 # C++ compiler $cxx works ok with C compiler $cc
1433 echo "C++ compiler $cxx does not work with C compiler $cc"
1434 echo "Disabling C++ specific optional code"
1438 echo "No C++ compiler available; disabling C++ specific optional code"
1442 gcc_flags
="-Wold-style-declaration -Wold-style-definition -Wtype-limits"
1443 gcc_flags
="-Wformat-security -Wformat-y2k -Winit-self -Wignored-qualifiers $gcc_flags"
1444 gcc_flags
="-Wmissing-include-dirs -Wempty-body -Wnested-externs $gcc_flags"
1445 gcc_flags
="-Wendif-labels $gcc_flags"
1446 gcc_flags
="-Wno-initializer-overrides $gcc_flags"
1447 gcc_flags
="-Wno-string-plus-int $gcc_flags"
1448 # Note that we do not add -Werror to gcc_flags here, because that would
1449 # enable it for all configure tests. If a configure test failed due
1450 # to -Werror this would just silently disable some features,
1451 # so it's too error prone.
1453 int main(void) { return 0; }
1455 for flag
in $gcc_flags; do
1456 # Use the positive sense of the flag when testing for -Wno-wombat
1457 # support (gcc will happily accept the -Wno- form of unknown
1459 optflag
="$(echo $flag | sed -e 's/^-Wno-/-W/')"
1460 if compile_prog
"-Werror $optflag" "" ; then
1461 QEMU_CFLAGS
="$QEMU_CFLAGS $flag"
1465 if test "$stack_protector" != "no" ; then
1466 gcc_flags
="-fstack-protector-strong -fstack-protector-all"
1467 for flag
in $gcc_flags; do
1468 # We need to check both a compile and a link, since some compiler
1469 # setups fail only on a .c->.o compile and some only at link time
1470 if do_cc
$QEMU_CFLAGS -Werror $flag -c -o $TMPO $TMPC &&
1471 compile_prog
"-Werror $flag" ""; then
1472 QEMU_CFLAGS
="$QEMU_CFLAGS $flag"
1473 LIBTOOLFLAGS
="$LIBTOOLFLAGS -Wc,$flag"
1479 # Workaround for http://gcc.gnu.org/PR55489. Happens with -fPIE/-fPIC and
1480 # large functions that use global variables. The bug is in all releases of
1481 # GCC, but it became particularly acute in 4.6.x and 4.7.x. It is fixed in
1482 # 4.7.3 and 4.8.0. We should be able to delete this at the end of 2013.
1484 #if __GNUC__ == 4 && (__GNUC_MINOR__ == 6 || (__GNUC_MINOR__ == 7 && __GNUC_PATCHLEVEL__ <= 2))
1485 int main(void) { return 0; }
1487 #error No bug in this compiler.
1490 if compile_prog
"-Werror -fno-gcse" "" ; then
1491 TRANSLATE_OPT_CFLAGS
=-fno-gcse
1494 if test "$static" = "yes" ; then
1495 if test "$modules" = "yes" ; then
1496 error_exit
"static and modules are mutually incompatible"
1498 if test "$pie" = "yes" ; then
1499 error_exit
"static and pie are mutually incompatible"
1505 if test "$pie" = ""; then
1506 case "$cpu-$targetos" in
1507 i386-Linux|x86_64-Linux|x32-Linux|i386-OpenBSD|x86_64-OpenBSD
)
1515 if test "$pie" != "no" ; then
1519 # define THREAD __thread
1524 static THREAD int tls_var;
1526 int main(void) { return tls_var; }
1529 if compile_prog
"-fPIE -DPIE" "-pie"; then
1530 QEMU_CFLAGS
="-fPIE -DPIE $QEMU_CFLAGS"
1531 LDFLAGS
="-pie $LDFLAGS"
1533 if compile_prog
"" "-Wl,-z,relro -Wl,-z,now" ; then
1534 LDFLAGS
="-Wl,-z,relro -Wl,-z,now $LDFLAGS"
1537 if test "$pie" = "yes"; then
1538 error_exit
"PIE not available due to missing toolchain support"
1540 echo "Disabling PIE due to missing toolchain support"
1545 if compile_prog
"-fno-pie" "-nopie"; then
1546 CFLAGS_NOPIE
="-fno-pie"
1547 LDFLAGS_NOPIE
="-nopie"
1551 # check for broken gcc and libtool in RHEL5
1552 if test -n "$libtool" -a "$pie" != "no" ; then
1555 void *f(unsigned char *buf, int len);
1556 void *g(unsigned char *buf, int len);
1559 f(unsigned char *buf, int len)
1565 g(unsigned char *buf, int len)
1571 if ! libtool_prog
; then
1572 echo "Disabling libtool due to broken toolchain support"
1577 ##########################################
1578 # __sync_fetch_and_and requires at least -march=i486. Many toolchains
1579 # use i686 as default anyway, but for those that don't, an explicit
1580 # specification is necessary
1582 if test "$cpu" = "i386"; then
1584 static int sfaa(int *ptr)
1586 return __sync_fetch_and_and(ptr, 0);
1592 val = __sync_val_compare_and_swap(&val, 0, 1);
1597 if ! compile_prog
"" "" ; then
1598 QEMU_CFLAGS
="-march=i486 $QEMU_CFLAGS"
1602 #########################################
1603 # Solaris specific configure tool chain decisions
1605 if test "$solaris" = "yes" ; then
1606 if has
$install; then
1609 error_exit
"Solaris install program not found. Use --install=/usr/ucb/install or" \
1610 "install fileutils from www.blastwave.org using pkg-get -i fileutils" \
1611 "to get ginstall which is used by default (which lives in /opt/csw/bin)"
1613 if test "`path_of $install`" = "/usr/sbin/install" ; then
1614 error_exit
"Solaris /usr/sbin/install is not an appropriate install program." \
1615 "try ginstall from the GNU fileutils available from www.blastwave.org" \
1616 "using pkg-get -i fileutils, or use --install=/usr/ucb/install"
1621 if test -f /usr
/ccs
/bin
/ar ; then
1622 error_exit
"No path includes ar" \
1623 "Add /usr/ccs/bin to your path and rerun configure"
1625 error_exit
"No path includes ar"
1629 if test -z "${target_list+xxx}" ; then
1630 target_list
="$default_target_list"
1632 target_list
=`echo "$target_list" | sed -e 's/,/ /g'`
1635 # Check that we recognised the target name; this allows a more
1636 # friendly error message than if we let it fall through.
1637 for target
in $target_list; do
1638 case " $default_target_list " in
1642 error_exit
"Unknown target name '$target'"
1647 # see if system emulation was really requested
1648 case " $target_list " in
1649 *"-softmmu "*) softmmu
=yes
1655 feature_not_found
() {
1659 error_exit
"User requested feature $feature" \
1660 "configure was not able to find it." \
1665 # big/little endian test
1667 short big_endian[] = { 0x4269, 0x4765, 0x4e64, 0x4961, 0x4e00, 0, };
1668 short little_endian[] = { 0x694c, 0x7454, 0x654c, 0x6e45, 0x6944, 0x6e41, 0, };
1669 extern int foo(short *, short *);
1670 int main(int argc, char *argv[]) {
1671 return foo(big_endian, little_endian);
1675 if compile_object
; then
1676 if grep -q BiGeNdIaN
$TMPO ; then
1678 elif grep -q LiTtLeEnDiAn
$TMPO ; then
1681 echo big
/little
test failed
1684 echo big
/little
test failed
1687 ##########################################
1690 if ! has
"$pkg_config_exe"; then
1691 error_exit
"pkg-config binary '$pkg_config_exe' not found"
1694 ##########################################
1697 if test "$linux_user" = "yes"; then
1700 #include <linux/futex.h>
1702 #if !defined(CLONE_SETTLS) || !defined(FUTEX_WAIT)
1708 if ! compile_object
; then
1709 feature_not_found
"nptl" "Install glibc and linux kernel headers."
1713 ##########################################
1716 if test "$zlib" != "no" ; then
1719 int main(void) { zlibVersion(); return 0; }
1721 if compile_prog
"" "-lz" ; then
1724 error_exit
"zlib check failed" \
1725 "Make sure to have the zlib libs and headers installed."
1730 ##########################################
1733 if test "$lzo" != "no" ; then
1735 #include <lzo/lzo1x.h>
1736 int main(void) { lzo_version(); return 0; }
1738 if compile_prog
"" "-llzo2" ; then
1741 error_exit
"lzo check failed" \
1742 "Make sure to have the lzo libs and headers installed."
1745 libs_softmmu
="$libs_softmmu -llzo2"
1748 ##########################################
1751 if test "$snappy" != "no" ; then
1753 #include <snappy-c.h>
1754 int main(void) { snappy_max_compressed_length(4096); return 0; }
1756 if compile_prog
"" "-lsnappy" ; then
1759 error_exit
"snappy check failed" \
1760 "Make sure to have the snappy libs and headers installed."
1763 libs_softmmu
="$libs_softmmu -lsnappy"
1766 ##########################################
1769 if test "$seccomp" != "no" ; then
1770 if $pkg_config --atleast-version=2.1.0 libseccomp
; then
1771 libs_softmmu
="$libs_softmmu `$pkg_config --libs libseccomp`"
1772 QEMU_CFLAGS
="$QEMU_CFLAGS `$pkg_config --cflags libseccomp`"
1775 if test "$seccomp" = "yes"; then
1776 feature_not_found
"libseccomp" "Install libseccomp devel >= 2.1.0"
1781 ##########################################
1784 if test "$xen" != "no" ; then
1785 xen_libs
="-lxenstore -lxenctrl -lxenguest"
1787 # First we test whether Xen headers and libraries are available.
1788 # If no, we are done and there is no Xen support.
1789 # If yes, more tests are run to detect the Xen version.
1793 #include <xenctrl.h>
1798 if ! compile_prog
"" "$xen_libs" ; then
1800 if test "$xen" = "yes" ; then
1801 feature_not_found
"xen" "Install xen devel"
1807 cat > $TMPC <<EOF &&
1808 #include <xenctrl.h>
1809 #include <xenstore.h>
1811 #include <xen/hvm/hvm_info_table.h>
1812 #if !defined(HVM_MAX_VCPUS)
1813 # error HVM_MAX_VCPUS not defined
1818 xc = xc_interface_open(0, 0, 0);
1819 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1820 xc_gnttab_open(NULL, 0);
1821 xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
1822 xc_hvm_inject_msi(xc, 0, 0xf0000000, 0x00000000);
1826 compile_prog
"" "$xen_libs"
1828 xen_ctrl_version
=420
1832 cat > $TMPC <<EOF &&
1833 #include <xenctrl.h>
1836 #include <xen/hvm/hvm_info_table.h>
1837 #if !defined(HVM_MAX_VCPUS)
1838 # error HVM_MAX_VCPUS not defined
1842 xc_interface_open(0, 0, 0);
1843 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1844 xc_gnttab_open(NULL, 0);
1845 xc_domain_add_to_physmap(0, 0, XENMAPSPACE_gmfn, 0, 0);
1849 compile_prog
"" "$xen_libs"
1851 xen_ctrl_version
=410
1856 cat > $TMPC <<EOF &&
1857 #include <xenctrl.h>
1860 #include <xen/hvm/hvm_info_table.h>
1861 #if !defined(HVM_MAX_VCPUS)
1862 # error HVM_MAX_VCPUS not defined
1865 struct xen_add_to_physmap xatp = {
1866 .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
1869 xc_interface_open();
1871 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1872 xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
1876 compile_prog
"" "$xen_libs"
1878 xen_ctrl_version
=400
1883 cat > $TMPC <<EOF &&
1884 #include <xenctrl.h>
1887 struct xen_add_to_physmap xatp = {
1888 .domid = 0, .space = XENMAPSPACE_gmfn, .idx = 0, .gpfn = 0,
1891 xc_interface_open();
1893 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1894 xc_memory_op(0, XENMEM_add_to_physmap, &xatp);
1898 compile_prog
"" "$xen_libs"
1900 xen_ctrl_version
=340
1905 cat > $TMPC <<EOF &&
1906 #include <xenctrl.h>
1910 xc_interface_open();
1912 xc_hvm_set_mem_type(0, 0, HVMMEM_ram_ro, 0, 0);
1916 compile_prog
"" "$xen_libs"
1918 xen_ctrl_version
=330
1921 # Xen version unsupported
1923 if test "$xen" = "yes" ; then
1924 feature_not_found
"xen (unsupported version)" "Install supported xen (e.g. 4.0, 3.4, 3.3)"
1929 if test "$xen" = yes; then
1930 libs_softmmu
="$xen_libs $libs_softmmu"
1934 if test "$xen_pci_passthrough" != "no"; then
1935 if test "$xen" = "yes" && test "$linux" = "yes" &&
1936 test "$xen_ctrl_version" -ge 340; then
1937 xen_pci_passthrough
=yes
1939 if test "$xen_pci_passthrough" = "yes"; then
1940 if test "$xen_ctrl_version" -lt 340; then
1941 error_exit
"User requested feature Xen PCI Passthrough" \
1942 "This feature does not work with Xen 3.3"
1944 error_exit
"User requested feature Xen PCI Passthrough" \
1945 " but this feature requires /sys from Linux"
1947 xen_pci_passthrough
=no
1951 ##########################################
1954 if ! has
$libtool; then
1958 # MacOSX ships with a libtool which isn't the GNU one; weed this
1959 # out by checking whether libtool supports the --version switch
1960 if test -n "$libtool"; then
1961 if ! "$libtool" --version >/dev
/null
2>&1; then
1966 ##########################################
1968 if test "$sparse" != "no" ; then
1972 if test "$sparse" = "yes" ; then
1973 feature_not_found
"sparse" "Install sparse binary"
1979 ##########################################
1982 if test "$gtkabi" = ""; then
1983 # The GTK ABI was not specified explicitly, so try whether 2.0 is available.
1984 # Use 3.0 as a fallback if that is available.
1985 if $pkg_config --exists "gtk+-2.0 >= 2.18.0"; then
1987 elif $pkg_config --exists "gtk+-3.0 >= 3.0.0"; then
1994 if test "$gtk" != "no"; then
1995 gtkpackage
="gtk+-$gtkabi"
1996 gtkx11package
="gtk+-x11-$gtkabi"
1997 if test "$gtkabi" = "3.0" ; then
2002 if $pkg_config --exists "$gtkpackage >= $gtkversion"; then
2003 gtk_cflags
=`$pkg_config --cflags $gtkpackage`
2004 gtk_libs
=`$pkg_config --libs $gtkpackage`
2005 if $pkg_config --exists "$gtkx11package >= $gtkversion"; then
2006 gtk_libs
="$gtk_libs -lX11"
2008 libs_softmmu
="$gtk_libs $libs_softmmu"
2010 elif test "$gtk" = "yes"; then
2011 feature_not_found
"gtk" "Install gtk2 or gtk3 devel"
2017 ##########################################
2020 if test "$vte" != "no"; then
2021 if test "$gtkabi" = "3.0"; then
2022 vtepackage
="vte-2.90"
2028 if $pkg_config --exists "$vtepackage >= $vteversion"; then
2029 vte_cflags
=`$pkg_config --cflags $vtepackage`
2030 vte_libs
=`$pkg_config --libs $vtepackage`
2031 libs_softmmu
="$vte_libs $libs_softmmu"
2033 elif test "$vte" = "yes"; then
2034 if test "$gtkabi" = "3.0"; then
2035 feature_not_found
"vte" "Install libvte-2.90 devel"
2037 feature_not_found
"vte" "Install libvte devel"
2044 ##########################################
2047 # Look for sdl configuration program (pkg-config or sdl-config). Try
2048 # sdl-config even without cross prefix, and favour pkg-config over sdl-config.
2050 if test $sdlabi = "2.0"; then
2051 sdl_config
=$sdl2_config
2053 sdlconfigname
=sdl2_config
2056 sdlconfigname
=sdl_config
2059 if test "`basename $sdl_config`" != $sdlconfigname && ! has
${sdl_config}; then
2060 sdl_config
=$sdlconfigname
2063 if $pkg_config $sdlname --exists; then
2064 sdlconfig
="$pkg_config $sdlname"
2065 _sdlversion
=`$sdlconfig --modversion 2>/dev/null | sed 's/[^0-9]//g'`
2066 elif has
${sdl_config}; then
2067 sdlconfig
="$sdl_config"
2068 _sdlversion
=`$sdlconfig --version | sed 's/[^0-9]//g'`
2070 if test "$sdl" = "yes" ; then
2071 feature_not_found
"sdl" "Install SDL devel"
2075 if test -n "$cross_prefix" && test "$(basename "$sdlconfig")" = sdl-config
; then
2076 echo warning
: using
"\"$sdlconfig\"" to detect cross-compiled sdl
>&2
2080 if test "$sdl" != "no" ; then
2083 #undef main /* We don't want SDL to override our main() */
2084 int main( void ) { return SDL_Init (SDL_INIT_VIDEO); }
2086 sdl_cflags
=`$sdlconfig --cflags 2> /dev/null`
2087 if test "$static" = "yes" ; then
2088 sdl_libs
=`$sdlconfig --static-libs 2>/dev/null`
2090 sdl_libs
=`$sdlconfig --libs 2> /dev/null`
2092 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2093 if test "$_sdlversion" -lt 121 ; then
2096 if test "$cocoa" = "no" ; then
2101 # static link with sdl ? (note: sdl.pc's --static --libs is broken)
2102 if test "$sdl" = "yes" -a "$static" = "yes" ; then
2103 if test $?
= 0 && echo $sdl_libs |
grep -- -laa > /dev
/null
; then
2104 sdl_libs
="$sdl_libs `aalib-config --static-libs 2>/dev/null`"
2105 sdl_cflags
="$sdl_cflags `aalib-config --cflags 2>/dev/null`"
2107 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2113 else # sdl not found
2114 if test "$sdl" = "yes" ; then
2115 feature_not_found
"sdl" "Install SDL devel"
2118 fi # sdl compile test
2121 if test "$sdl" = "yes" ; then
2124 #if defined(SDL_VIDEO_DRIVER_X11)
2125 #include <X11/XKBlib.h>
2127 #error No x11 support
2129 int main(void) { return 0; }
2131 if compile_prog
"$sdl_cflags" "$sdl_libs" ; then
2132 sdl_libs
="$sdl_libs -lX11"
2134 libs_softmmu
="$sdl_libs $libs_softmmu"
2137 ##########################################
2138 # RDMA needs OpenFabrics libraries
2139 if test "$rdma" != "no" ; then
2141 #include <rdma/rdma_cma.h>
2142 int main(void) { return 0; }
2144 rdma_libs
="-lrdmacm -libverbs"
2145 if compile_prog
"" "$rdma_libs" ; then
2147 libs_softmmu
="$libs_softmmu $rdma_libs"
2149 if test "$rdma" = "yes" ; then
2151 " OpenFabrics librdmacm/libibverbs not present." \
2153 " (1) Fast: Install infiniband packages from your distro." \
2154 " (2) Cleanest: Install libraries from www.openfabrics.org" \
2155 " (3) Also: Install softiwarp if you don't have RDMA hardware"
2161 ##########################################
2162 # VNC TLS/WS detection
2163 if test "$vnc" = "yes" -a \
( "$vnc_tls" != "no" -o "$vnc_ws" != "no" \
) ; then
2165 #include <gnutls/gnutls.h>
2166 int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0; }
2168 vnc_tls_cflags
=`$pkg_config --cflags gnutls 2> /dev/null`
2169 vnc_tls_libs
=`$pkg_config --libs gnutls 2> /dev/null`
2170 if compile_prog
"$vnc_tls_cflags" "$vnc_tls_libs" ; then
2171 if test "$vnc_tls" != "no" ; then
2174 if test "$vnc_ws" != "no" ; then
2177 libs_softmmu
="$vnc_tls_libs $libs_softmmu"
2178 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_tls_cflags"
2180 if test "$vnc_tls" = "yes" ; then
2181 feature_not_found
"vnc-tls" "Install gnutls devel"
2183 if test "$vnc_ws" = "yes" ; then
2184 feature_not_found
"vnc-ws" "Install gnutls devel"
2191 ##########################################
2192 # Quorum probe (check for gnutls)
2193 if test "$quorum" != "no" ; then
2195 #include <gnutls/gnutls.h>
2196 #include <gnutls/crypto.h>
2197 int main(void) {char data[4096], digest[32];
2198 gnutls_hash_fast(GNUTLS_DIG_SHA256, data, 4096, digest);
2202 quorum_tls_cflags
=`$pkg_config --cflags gnutls 2> /dev/null`
2203 quorum_tls_libs
=`$pkg_config --libs gnutls 2> /dev/null`
2204 if compile_prog
"$quorum_tls_cflags" "$quorum_tls_libs" ; then
2206 libs_softmmu
="$quorum_tls_libs $libs_softmmu"
2207 libs_tools
="$quorum_tls_libs $libs_softmmu"
2208 QEMU_CFLAGS
="$QEMU_CFLAGS $quorum_tls_cflags"
2210 echo "gnutls > 2.10.0 required to compile Quorum"
2215 ##########################################
2216 # VNC SASL detection
2217 if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
2219 #include <sasl/sasl.h>
2221 int main(void) { sasl_server_init(NULL, "qemu"); return 0; }
2223 # Assuming Cyrus-SASL installed in /usr prefix
2225 vnc_sasl_libs
="-lsasl2"
2226 if compile_prog
"$vnc_sasl_cflags" "$vnc_sasl_libs" ; then
2228 libs_softmmu
="$vnc_sasl_libs $libs_softmmu"
2229 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_sasl_cflags"
2231 if test "$vnc_sasl" = "yes" ; then
2232 feature_not_found
"vnc-sasl" "Install Cyrus SASL devel"
2238 ##########################################
2239 # VNC JPEG detection
2240 if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
2243 #include <jpeglib.h>
2244 int main(void) { struct jpeg_compress_struct s; jpeg_create_compress(&s); return 0; }
2247 vnc_jpeg_libs
="-ljpeg"
2248 if compile_prog
"$vnc_jpeg_cflags" "$vnc_jpeg_libs" ; then
2250 libs_softmmu
="$vnc_jpeg_libs $libs_softmmu"
2251 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_jpeg_cflags"
2253 if test "$vnc_jpeg" = "yes" ; then
2254 feature_not_found
"vnc-jpeg" "Install libjpeg-turbo devel"
2260 ##########################################
2262 if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
2264 //#include <stdio.h>
2268 png_structp png_ptr;
2269 png_ptr = png_create_write_struct(PNG_LIBPNG_VER_STRING, NULL, NULL, NULL);
2270 return png_ptr != 0;
2273 if $pkg_config libpng
--exists; then
2274 vnc_png_cflags
=`$pkg_config libpng --cflags`
2275 vnc_png_libs
=`$pkg_config libpng --libs`
2278 vnc_png_libs
="-lpng"
2280 if compile_prog
"$vnc_png_cflags" "$vnc_png_libs" ; then
2282 libs_softmmu
="$vnc_png_libs $libs_softmmu"
2283 QEMU_CFLAGS
="$QEMU_CFLAGS $vnc_png_cflags"
2285 if test "$vnc_png" = "yes" ; then
2286 feature_not_found
"vnc-png" "Install libpng devel"
2292 ##########################################
2293 # fnmatch() probe, used for ACL routines
2296 #include <fnmatch.h>
2299 fnmatch("foo", "foo", 0);
2303 if compile_prog
"" "" ; then
2307 ##########################################
2308 # uuid_generate() probe, used for vdi block driver
2309 # Note that on some systems (notably MacOSX) no extra library
2310 # need be linked to get the uuid functions.
2311 if test "$uuid" != "no" ; then
2314 #include <uuid/uuid.h>
2318 uuid_generate(my_uuid);
2322 if compile_prog
"" "" ; then
2324 elif compile_prog
"" "$uuid_libs" ; then
2326 libs_softmmu
="$uuid_libs $libs_softmmu"
2327 libs_tools
="$uuid_libs $libs_tools"
2329 if test "$uuid" = "yes" ; then
2330 feature_not_found
"uuid" "Install libuuid devel"
2336 if test "$vhdx" = "yes" ; then
2337 if test "$uuid" = "no" ; then
2338 error_exit
"uuid required for VHDX support"
2340 elif test "$vhdx" != "no" ; then
2341 if test "$uuid" = "yes" ; then
2348 ##########################################
2349 # xfsctl() probe, used for raw-posix
2350 if test "$xfs" != "no" ; then
2352 #include <stddef.h> /* NULL */
2353 #include <xfs/xfs.h>
2356 xfsctl(NULL, 0, 0, NULL);
2360 if compile_prog
"" "" ; then
2363 if test "$xfs" = "yes" ; then
2364 feature_not_found
"xfs" "Instal xfsprogs/xfslibs devel"
2370 ##########################################
2371 # vde libraries probe
2372 if test "$vde" != "no" ; then
2373 vde_libs
="-lvdeplug"
2375 #include <libvdeplug.h>
2378 struct vde_open_args a = {0, 0, 0};
2384 if compile_prog
"" "$vde_libs" ; then
2386 libs_softmmu
="$vde_libs $libs_softmmu"
2387 libs_tools
="$vde_libs $libs_tools"
2389 if test "$vde" = "yes" ; then
2390 feature_not_found
"vde" "Install vde (Virtual Distributed Ethernet) devel"
2396 ##########################################
2397 # netmap support probe
2398 # Apart from looking for netmap headers, we make sure that the host API version
2399 # supports the netmap backend (>=11). The upper bound (15) is meant to simulate
2400 # a minor/major version number. Minor new features will be marked with values up
2401 # to 15, and if something happens that requires a change to the backend we will
2402 # move above 15, submit the backend fixes and modify this two bounds.
2403 if test "$netmap" != "no" ; then
2405 #include <inttypes.h>
2407 #include <net/netmap.h>
2408 #include <net/netmap_user.h>
2409 #if (NETMAP_API < 11) || (NETMAP_API > 15)
2412 int main(void) { return 0; }
2414 if compile_prog
"" "" ; then
2417 if test "$netmap" = "yes" ; then
2418 feature_not_found
"netmap"
2424 ##########################################
2425 # libcap-ng library probe
2426 if test "$cap_ng" != "no" ; then
2432 capng_capability_to_name(CAPNG_EFFECTIVE);
2436 if compile_prog
"" "$cap_libs" ; then
2438 libs_tools
="$cap_libs $libs_tools"
2440 if test "$cap_ng" = "yes" ; then
2441 feature_not_found
"cap_ng" "Install libcap-ng devel"
2447 ##########################################
2448 # Sound support libraries probe
2459 int main(void) { $exp }
2461 if compile_prog
"$cfl" "$lib" ; then
2464 error_exit
"$drv check failed" \
2465 "Make sure to have the $drv libs and headers installed."
2469 audio_drv_list
=`echo "$audio_drv_list" | sed -e 's/,/ /g'`
2470 for drv
in $audio_drv_list; do
2473 audio_drv_probe
$drv alsa
/asoundlib.h
-lasound \
2474 "return snd_pcm_close((snd_pcm_t *)0);"
2475 libs_softmmu
="-lasound $libs_softmmu"
2479 if test -z $fmod_lib ||
test -z $fmod_inc; then
2480 error_exit
"You must specify path to FMOD library and headers" \
2481 "Example: --fmod-inc=/path/include/fmod --fmod-lib=/path/lib/libfmod-3.74.so"
2483 audio_drv_probe
$drv fmod.h
$fmod_lib "return FSOUND_GetVersion();" "-I $fmod_inc"
2484 libs_softmmu
="$fmod_lib $libs_softmmu"
2488 audio_drv_probe
$drv esd.h
-lesd 'return esd_play_stream(0, 0, "", 0);'
2489 libs_softmmu
="-lesd $libs_softmmu"
2494 audio_drv_probe
$drv pulse
/mainloop.h
"-lpulse" \
2495 "pa_mainloop *m = 0; pa_mainloop_free (m); return 0;"
2496 libs_softmmu
="-lpulse $libs_softmmu"
2501 libs_softmmu
="-framework CoreAudio $libs_softmmu"
2505 libs_softmmu
="-lole32 -ldxguid $libs_softmmu"
2510 libs_softmmu
="$oss_lib $libs_softmmu"
2514 # XXX: Probes for CoreAudio, DirectSound, SDL(?)
2518 libs_softmmu
="-lwinmm $libs_softmmu"
2523 echo "$audio_possible_drivers" |
grep -q "\<$drv\>" ||
{
2524 error_exit
"Unknown driver '$drv' selected" \
2525 "Possible drivers are: $audio_possible_drivers"
2531 ##########################################
2534 if test "$brlapi" != "no" ; then
2535 brlapi_libs
="-lbrlapi"
2539 int main( void ) { return brlapi__openConnection (NULL, NULL, NULL); }
2541 if compile_prog
"" "$brlapi_libs" ; then
2543 libs_softmmu
="$brlapi_libs $libs_softmmu"
2545 if test "$brlapi" = "yes" ; then
2546 feature_not_found
"brlapi" "Install brlapi devel"
2552 ##########################################
2554 if test "$curses" != "no" ; then
2555 if test "$mingw32" = "yes" ; then
2556 curses_list
="-lpdcurses"
2558 curses_list
="$($pkg_config --libs ncurses 2>/dev/null):-lncurses:-lcurses"
2564 const char *s = curses_version();
2570 for curses_lib
in $curses_list; do
2572 if compile_prog
"" "$curses_lib" ; then
2574 libs_softmmu
="$curses_lib $libs_softmmu"
2579 if test "$curses_found" = "yes" ; then
2582 if test "$curses" = "yes" ; then
2583 feature_not_found
"curses" "Install ncurses devel"
2589 ##########################################
2591 if test "$curl" != "no" ; then
2592 if $pkg_config libcurl
--exists; then
2593 curlconfig
="$pkg_config libcurl"
2595 curlconfig
=curl-config
2598 #include <curl/curl.h>
2599 int main(void) { curl_easy_init(); curl_multi_setopt(0, 0, 0); return 0; }
2601 curl_cflags
=`$curlconfig --cflags 2>/dev/null`
2602 curl_libs
=`$curlconfig --libs 2>/dev/null`
2603 if compile_prog
"$curl_cflags" "$curl_libs" ; then
2606 if test "$curl" = "yes" ; then
2607 feature_not_found
"curl" "Install libcurl devel"
2613 ##########################################
2614 # bluez support probe
2615 if test "$bluez" != "no" ; then
2617 #include <bluetooth/bluetooth.h>
2618 int main(void) { return bt_error(0); }
2620 bluez_cflags
=`$pkg_config --cflags bluez 2> /dev/null`
2621 bluez_libs
=`$pkg_config --libs bluez 2> /dev/null`
2622 if compile_prog
"$bluez_cflags" "$bluez_libs" ; then
2624 libs_softmmu
="$bluez_libs $libs_softmmu"
2626 if test "$bluez" = "yes" ; then
2627 feature_not_found
"bluez" "Install bluez-libs/libbluetooth devel"
2633 ##########################################
2634 # glib support probe
2636 if test "$mingw32" = yes; then
2637 # g_poll is required in order to integrate with the glib main loop.
2642 glib_modules
=gthread-2.0
2643 if test "$modules" = yes; then
2644 glib_modules
="$glib_modules gmodule-2.0"
2647 for i
in $glib_modules; do
2648 if $pkg_config --atleast-version=$glib_req_ver $i; then
2649 glib_cflags
=`$pkg_config --cflags $i`
2650 glib_libs
=`$pkg_config --libs $i`
2651 CFLAGS
="$glib_cflags $CFLAGS"
2652 LIBS
="$glib_libs $LIBS"
2653 libs_qga
="$glib_libs $libs_qga"
2655 error_exit
"glib-$glib_req_ver $i is required to compile QEMU"
2659 ##########################################
2660 # SHA command probe for modules
2661 if test "$modules" = yes; then
2662 shacmd_probe
="sha1sum sha1 shasum"
2663 for c
in $shacmd_probe; do
2664 if which $c >/dev
/null
2>&1; then
2669 if test "$shacmd" = ""; then
2670 error_exit
"one of the checksum commands is required to enable modules: $shacmd_probe"
2674 ##########################################
2675 # pixman support probe
2677 if test "$pixman" = ""; then
2678 if test "$want_tools" = "no" -a "$softmmu" = "no"; then
2680 elif $pkg_config pixman-1
> /dev
/null
2>&1; then
2686 if test "$pixman" = "none"; then
2687 if test "$want_tools" != "no" -o "$softmmu" != "no"; then
2688 error_exit
"pixman disabled but system emulation or tools build" \
2689 "enabled. You can turn off pixman only if you also" \
2690 "disable all system emulation targets and the tools" \
2691 "build with '--disable-tools --disable-system'."
2695 elif test "$pixman" = "system"; then
2696 pixman_cflags
=`$pkg_config --cflags pixman-1`
2697 pixman_libs
=`$pkg_config --libs pixman-1`
2699 if test ! -d ${source_path}/pixman
/pixman
; then
2700 error_exit
"pixman not present. Your options:" \
2701 " (1) Preferred: Install the pixman devel package (any recent" \
2702 " distro should have packages as Xorg needs pixman too)." \
2703 " (2) Fetch the pixman submodule, using:" \
2704 " git submodule update --init pixman"
2706 mkdir
-p pixman
/pixman
2707 pixman_cflags
="-I\$(SRC_PATH)/pixman/pixman -I\$(BUILD_DIR)/pixman/pixman"
2708 pixman_libs
="-L\$(BUILD_DIR)/pixman/pixman/.libs -lpixman-1"
2711 ##########################################
2714 if test "$cap" != "no" ; then
2717 #include <sys/capability.h>
2718 int main(void) { cap_t caps; caps = cap_init(); return caps != NULL; }
2720 if compile_prog
"" "-lcap" ; then
2727 ##########################################
2729 PTHREADLIBS_LIST
="-pthread -lpthread -lpthreadGC2"
2733 #include <pthread.h>
2734 static void *f(void *p) { return NULL; }
2737 pthread_create(&thread, 0, f, 0);
2741 if compile_prog
"" "" ; then
2744 for pthread_lib
in $PTHREADLIBS_LIST; do
2745 if compile_prog
"" "$pthread_lib" ; then
2748 for lib_entry
in $LIBS; do
2749 if test "$lib_entry" = "$pthread_lib"; then
2754 if test "$found" = "no"; then
2755 LIBS
="$pthread_lib $LIBS"
2762 if test "$mingw32" != yes -a "$pthread" = no
; then
2763 error_exit
"pthread check failed" \
2764 "Make sure to have the pthread libs and headers installed."
2767 # check for pthread_setname_np
2768 pthread_setname_np
=no
2770 #include <pthread.h>
2772 static void *f(void *p) { return NULL; }
2776 pthread_create(&thread, 0, f, 0);
2777 pthread_setname_np(thread, "QEMU");
2781 if compile_prog
"" "$pthread_lib" ; then
2782 pthread_setname_np
=yes
2785 ##########################################
2787 if test "$rbd" != "no" ; then
2790 #include <rbd/librbd.h>
2793 rados_create(&cluster, NULL);
2797 rbd_libs
="-lrbd -lrados"
2798 if compile_prog
"" "$rbd_libs" ; then
2801 if test "$rbd" = "yes" ; then
2802 feature_not_found
"rados block device" "Install librbd/ceph devel"
2808 ##########################################
2810 min_libssh2_version
=1.2.8
2811 if test "$libssh2" != "no" ; then
2812 if $pkg_config --atleast-version=$min_libssh2_version libssh2
; then
2813 libssh2_cflags
=`$pkg_config libssh2 --cflags`
2814 libssh2_libs
=`$pkg_config libssh2 --libs`
2817 if test "$libssh2" = "yes" ; then
2818 error_exit
"libssh2 >= $min_libssh2_version required for --enable-libssh2"
2824 ##########################################
2825 # libssh2_sftp_fsync probe
2827 if test "$libssh2" = "yes"; then
2830 #include <libssh2.h>
2831 #include <libssh2_sftp.h>
2833 LIBSSH2_SESSION *session;
2835 LIBSSH2_SFTP_HANDLE *sftp_handle;
2836 session = libssh2_session_init ();
2837 sftp = libssh2_sftp_init (session);
2838 sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
2839 libssh2_sftp_fsync (sftp_handle);
2843 # libssh2_cflags/libssh2_libs defined in previous test.
2844 if compile_prog
"$libssh2_cflags" "$libssh2_libs" ; then
2845 QEMU_CFLAGS
="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
2849 ##########################################
2852 if test "$linux_aio" != "no" ; then
2855 #include <sys/eventfd.h>
2857 int main(void) { io_setup(0, NULL); io_set_eventfd(NULL, 0); eventfd(0, 0); return 0; }
2859 if compile_prog
"" "-laio" ; then
2862 if test "$linux_aio" = "yes" ; then
2863 feature_not_found
"linux AIO" "Install libaio devel"
2869 ##########################################
2870 # TPM passthrough is only on x86 Linux
2872 if test "$targetos" = Linux
&& test "$cpu" = i386
-o "$cpu" = x86_64
; then
2873 tpm_passthrough
=$tpm
2878 ##########################################
2879 # adjust virtio-blk-data-plane based on linux-aio
2881 if test "$virtio_blk_data_plane" = "yes" -a \
2882 "$linux_aio" != "yes" ; then
2883 error_exit
"virtio-blk-data-plane requires Linux AIO, please try --enable-linux-aio"
2884 elif test -z "$virtio_blk_data_plane" ; then
2885 virtio_blk_data_plane
=$linux_aio
2888 ##########################################
2891 if test "$attr" != "no" ; then
2894 #include <sys/types.h>
2895 #ifdef CONFIG_LIBATTR
2896 #include <attr/xattr.h>
2898 #include <sys/xattr.h>
2900 int main(void) { getxattr(NULL, NULL, NULL, 0); setxattr(NULL, NULL, NULL, 0, 0); return 0; }
2902 if compile_prog
"" "" ; then
2904 # Older distros have <attr/xattr.h>, and need -lattr:
2905 elif compile_prog
"-DCONFIG_LIBATTR" "-lattr" ; then
2910 if test "$attr" = "yes" ; then
2911 feature_not_found
"ATTR" "Install libc6 or libattr devel"
2917 ##########################################
2920 #include <sys/types.h>
2921 #include <sys/uio.h>
2923 int main(void) { return sizeof(struct iovec); }
2926 if compile_prog
"" "" ; then
2930 ##########################################
2933 #include <sys/types.h>
2934 #include <sys/uio.h>
2936 int main(void) { return preadv(0, 0, 0, 0); }
2939 if compile_prog
"" "" ; then
2943 ##########################################
2945 # fdt support is mandatory for at least some target architectures,
2946 # so insist on it if we're building those system emulators.
2948 for target
in $target_list; do
2950 aarch64
*-softmmu|arm
*-softmmu|ppc
*-softmmu|microblaze
*-softmmu)
2956 if test "$fdt_required" = "yes"; then
2957 if test "$fdt" = "no"; then
2958 error_exit
"fdt disabled but some requested targets require it." \
2959 "You can turn off fdt only if you also disable all the system emulation" \
2960 "targets which need it (by specifying a cut down --target-list)."
2965 if test "$fdt" != "no" ; then
2967 # explicitly check for libfdt_env.h as it is missing in some stable installs
2969 #include <libfdt_env.h>
2970 int main(void) { return 0; }
2972 if compile_prog
"" "$fdt_libs" ; then
2973 # system DTC is good - use it
2975 elif test -d ${source_path}/dtc
/libfdt
; then
2976 # have submodule DTC - use it
2980 if [ "$pwd_is_source_path" != "y" ] ; then
2981 symlink
"$source_path/dtc/Makefile" "dtc/Makefile"
2982 symlink
"$source_path/dtc/scripts" "dtc/scripts"
2984 fdt_cflags
="-I\$(SRC_PATH)/dtc/libfdt"
2985 fdt_libs
="-L\$(BUILD_DIR)/dtc/libfdt $fdt_libs"
2986 elif test "$fdt" = "yes" ; then
2987 # have neither and want - prompt for system/submodule install
2988 error_exit
"DTC (libfdt) not present. Your options:" \
2989 " (1) Preferred: Install the DTC (libfdt) devel package" \
2990 " (2) Fetch the DTC submodule, using:" \
2991 " git submodule update --init dtc"
2993 # don't have and don't want
2999 libs_softmmu
="$libs_softmmu $fdt_libs"
3001 ##########################################
3002 # GLX probe, used by milkymist-tmu2
3003 if test "$glx" != "no" ; then
3004 glx_libs
="-lGL -lX11"
3006 #include <X11/Xlib.h>
3009 int main(void) { glBegin(0); glXQueryVersion(0,0,0); return 0; }
3011 if compile_prog
"" "-lGL -lX11" ; then
3014 if test "$glx" = "yes" ; then
3015 feature_not_found
"glx" "Install GL devel (e.g. MESA)"
3022 ##########################################
3024 if test "$glusterfs" != "no" ; then
3025 if $pkg_config --atleast-version=3 glusterfs-api
; then
3027 glusterfs_cflags
=`$pkg_config --cflags glusterfs-api`
3028 glusterfs_libs
=`$pkg_config --libs glusterfs-api`
3029 if $pkg_config --atleast-version=5 glusterfs-api
; then
3030 glusterfs_discard
="yes"
3032 if $pkg_config --atleast-version=6 glusterfs-api
; then
3033 glusterfs_zerofill
="yes"
3036 if test "$glusterfs" = "yes" ; then
3037 feature_not_found
"GlusterFS backend support" "Install glusterfs-api devel"
3043 # Check for inotify functions when we are building linux-user
3044 # emulator. This is done because older glibc versions don't
3045 # have syscall stubs for these implemented. In that case we
3046 # don't provide them even if kernel supports them.
3050 #include <sys/inotify.h>
3055 /* try to start inotify */
3056 return inotify_init();
3059 if compile_prog
"" "" ; then
3065 #include <sys/inotify.h>
3070 /* try to start inotify */
3071 return inotify_init1(0);
3074 if compile_prog
"" "" ; then
3078 # check if utimensat and futimens are supported
3081 #define _ATFILE_SOURCE
3084 #include <sys/stat.h>
3088 utimensat(AT_FDCWD, "foo", NULL, 0);
3093 if compile_prog
"" "" ; then
3097 # check if pipe2 is there
3106 return pipe2(pipefd, O_CLOEXEC);
3109 if compile_prog
"" "" ; then
3113 # check if accept4 is there
3116 #include <sys/socket.h>
3121 accept4(0, NULL, NULL, SOCK_CLOEXEC);
3125 if compile_prog
"" "" ; then
3129 # check if tee/splice is there. vmsplice was added same time.
3139 len = tee(STDIN_FILENO, STDOUT_FILENO, INT_MAX, SPLICE_F_NONBLOCK);
3140 splice(STDIN_FILENO, NULL, fd, NULL, len, SPLICE_F_MOVE);
3144 if compile_prog
"" "" ; then
3148 ##########################################
3153 #include <sys/syscall.h>
3155 int main(void) { return syscall(SYS_signalfd, -1, NULL, _NSIG / 8); }
3158 if compile_prog
"" "" ; then
3162 # check if eventfd is supported
3165 #include <sys/eventfd.h>
3169 return eventfd(0, EFD_NONBLOCK | EFD_CLOEXEC);
3172 if compile_prog
"" "" ; then
3176 # check for fallocate
3183 fallocate(0, 0, 0, 0);
3187 if compile_prog
"" "" ; then
3191 # check for fallocate hole punching
3192 fallocate_punch_hole
=no
3195 #include <linux/falloc.h>
3199 fallocate(0, FALLOC_FL_PUNCH_HOLE | FALLOC_FL_KEEP_SIZE, 0, 0);
3203 if compile_prog
"" "" ; then
3204 fallocate_punch_hole
=yes
3207 # check for sync_file_range
3214 sync_file_range(0, 0, 0, 0);
3218 if compile_prog
"" "" ; then
3222 # check for linux/fiemap.h and FS_IOC_FIEMAP
3225 #include <sys/ioctl.h>
3226 #include <linux/fs.h>
3227 #include <linux/fiemap.h>
3231 ioctl(0, FS_IOC_FIEMAP, 0);
3235 if compile_prog
"" "" ; then
3250 if compile_prog
"" "" ; then
3254 # check for ppoll support
3261 struct pollfd pfd = { .fd = 0, .events = 0, .revents = 0 };
3262 ppoll(&pfd, 1, 0, 0);
3266 if compile_prog
"" "" ; then
3270 # check for prctl(PR_SET_TIMERSLACK , ... ) support
3271 prctl_pr_set_timerslack
=no
3273 #include <sys/prctl.h>
3277 prctl(PR_SET_TIMERSLACK, 1, 0, 0, 0);
3281 if compile_prog
"" "" ; then
3282 prctl_pr_set_timerslack
=yes
3285 # check for epoll support
3288 #include <sys/epoll.h>
3296 if compile_prog
"" "" ; then
3300 # epoll_create1 and epoll_pwait are later additions
3301 # so we must check separately for their presence
3304 #include <sys/epoll.h>
3308 /* Note that we use epoll_create1 as a value, not as
3309 * a function being called. This is necessary so that on
3310 * old SPARC glibc versions where the function was present in
3311 * the library but not declared in the header file we will
3312 * fail the configure check. (Otherwise we will get a compiler
3313 * warning but not an error, and will proceed to fail the
3314 * qemu compile where we compile with -Werror.)
3316 return (int)(uintptr_t)&epoll_create1;
3319 if compile_prog
"" "" ; then
3325 #include <sys/epoll.h>
3329 epoll_pwait(0, 0, 0, 0, 0);
3333 if compile_prog
"" "" ; then
3337 # check for sendfile support
3340 #include <sys/sendfile.h>
3344 return sendfile(0, 0, 0, 0);
3347 if compile_prog
"" "" ; then
3351 # Check if tools are available to build documentation.
3352 if test "$docs" != "no" ; then
3353 if has makeinfo
&& has pod2man
; then
3356 if test "$docs" = "yes" ; then
3357 feature_not_found
"docs" "Install texinfo and Perl/perl-podlators"
3363 # Search for bswap_32 function
3366 #include <byteswap.h>
3367 int main(void) { return bswap_32(0); }
3369 if compile_prog
"" "" ; then
3373 # Search for bswap32 function
3376 #include <sys/endian.h>
3377 #include <sys/types.h>
3378 #include <machine/bswap.h>
3379 int main(void) { return bswap32(0); }
3381 if compile_prog
"" "" ; then
3385 ##########################################
3386 # Do we have libiscsi
3387 # We check for iscsi_write16_sync() to make sure we have a
3388 # at least version 1.4.0 of libiscsi.
3389 if test "$libiscsi" != "no" ; then
3392 #include <iscsi/iscsi.h>
3393 int main(void) { iscsi_write16_sync(NULL,0,0,NULL,0,0,0,0,0,0,0); return 0; }
3395 if $pkg_config --atleast-version=1.7.0 libiscsi
; then
3397 libiscsi_cflags
=$
($pkg_config --cflags libiscsi
)
3398 libiscsi_libs
=$
($pkg_config --libs libiscsi
)
3399 elif compile_prog
"" "-liscsi" ; then
3401 libiscsi_libs
="-liscsi"
3403 if test "$libiscsi" = "yes" ; then
3404 feature_not_found
"libiscsi" "Install libiscsi devel"
3410 # We also need to know the API version because there was an
3411 # API change from 1.4.0 to 1.5.0.
3412 if test "$libiscsi" = "yes"; then
3414 #include <iscsi/iscsi.h>
3417 iscsi_read10_task(0, 0, 0, 0, 0, 0, 0);
3421 if compile_prog
"" "-liscsi"; then
3422 libiscsi_version
="1.4.0"
3426 ##########################################
3430 int main(void) { return isnan(sin(0.0)); }
3432 if compile_prog
"" "" ; then
3434 elif compile_prog
"" "-lm" ; then
3436 libs_qga
="-lm $libs_qga"
3438 error_exit
"libm check failed"
3441 ##########################################
3443 # uClibc provides 2 versions of clock_gettime(), one with realtime
3444 # support and one without. This means that the clock_gettime() don't
3445 # need -lrt. We still need it for timer_create() so we check for this
3446 # function in addition.
3451 timer_create(CLOCK_REALTIME, NULL, NULL);
3452 return clock_gettime(CLOCK_REALTIME, NULL);
3456 if compile_prog
"" "" ; then
3458 # we need pthread for static linking. use previous pthread test result
3459 elif compile_prog
"" "-lrt $pthread_lib" ; then
3461 libs_qga
="-lrt $libs_qga"
3464 if test "$darwin" != "yes" -a "$mingw32" != "yes" -a "$solaris" != yes -a \
3465 "$aix" != "yes" -a "$haiku" != "yes" ; then
3466 libs_softmmu
="-lutil $libs_softmmu"
3469 ##########################################
3471 if test "$spice" != "no" ; then
3474 int main(void) { spice_server_new(); return 0; }
3476 spice_cflags
=$
($pkg_config --cflags spice-protocol spice-server
2>/dev
/null
)
3477 spice_libs
=$
($pkg_config --libs spice-protocol spice-server
2>/dev
/null
)
3478 if $pkg_config --atleast-version=0.12.0 spice-server
&& \
3479 $pkg_config --atleast-version=0.12.3 spice-protocol
&& \
3480 compile_prog
"$spice_cflags" "$spice_libs" ; then
3482 libs_softmmu
="$libs_softmmu $spice_libs"
3483 QEMU_CFLAGS
="$QEMU_CFLAGS $spice_cflags"
3484 spice_protocol_version
=$
($pkg_config --modversion spice-protocol
)
3485 spice_server_version
=$
($pkg_config --modversion spice-server
)
3487 if test "$spice" = "yes" ; then
3488 feature_not_found
"spice" "Install spice-server and spice-protocol devel"
3494 # check for libcacard for smartcard support
3496 # TODO - what's the minimal nss version we support?
3497 if test "$smartcard_nss" != "no"; then
3499 #include <pk11pub.h>
3500 int main(void) { PK11_FreeSlot(0); return 0; }
3502 # FIXME: do not include $glib_* in here
3503 nss_libs
="$($pkg_config --libs nss 2>/dev/null) $glib_libs"
3504 nss_cflags
="$($pkg_config --cflags nss 2>/dev/null) $glib_cflags"
3505 test_cflags
="$nss_cflags"
3506 # The header files in nss < 3.13.3 have a bug which causes them to
3507 # emit a warning. If we're going to compile QEMU with -Werror, then
3508 # test that the headers don't have this bug. Otherwise we would pass
3509 # the configure test but fail to compile QEMU later.
3510 if test "$werror" = "yes"; then
3511 test_cflags
="-Werror $test_cflags"
3513 if test -n "$libtool" &&
3514 $pkg_config --atleast-version=3.12.8 nss
&& \
3515 compile_prog
"$test_cflags" "$nss_libs"; then
3518 if test "$smartcard_nss" = "yes"; then
3519 feature_not_found
"nss"
3526 if test "$libusb" != "no" ; then
3527 if $pkg_config --atleast-version=1.0.13 libusb-1.0
; then
3529 libusb_cflags
=$
($pkg_config --cflags libusb-1.0
)
3530 libusb_libs
=$
($pkg_config --libs libusb-1.0
)
3531 QEMU_CFLAGS
="$QEMU_CFLAGS $libusb_cflags"
3532 libs_softmmu
="$libs_softmmu $libusb_libs"
3534 if test "$libusb" = "yes"; then
3535 feature_not_found
"libusb" "Install libusb devel"
3541 # check for usbredirparser for usb network redirection support
3542 if test "$usb_redir" != "no" ; then
3543 if $pkg_config --atleast-version=0.6 libusbredirparser-0.5
; then
3545 usb_redir_cflags
=$
($pkg_config --cflags libusbredirparser-0.5
)
3546 usb_redir_libs
=$
($pkg_config --libs libusbredirparser-0.5
)
3547 QEMU_CFLAGS
="$QEMU_CFLAGS $usb_redir_cflags"
3548 libs_softmmu
="$libs_softmmu $usb_redir_libs"
3550 if test "$usb_redir" = "yes"; then
3551 feature_not_found
"usb-redir" "Install usbredir devel"
3557 ##########################################
3558 # check if we have VSS SDK headers for win
3560 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$vss_win32_sdk" != "no" ; then
3561 case "$vss_win32_sdk" in
3562 "") vss_win32_include
="-I$source_path" ;;
3563 *\
*) # The SDK is installed in "Program Files" by default, but we cannot
3564 # handle path with spaces. So we symlink the headers into ".sdk/vss".
3565 vss_win32_include
="-I$source_path/.sdk/vss"
3566 symlink
"$vss_win32_sdk/inc" "$source_path/.sdk/vss/inc"
3568 *) vss_win32_include
="-I$vss_win32_sdk"
3571 #define __MIDL_user_allocate_free_DEFINED__
3572 #include <inc/win2003/vss.h>
3573 int main(void) { return VSS_CTX_BACKUP; }
3575 if compile_prog
"$vss_win32_include" "" ; then
3576 guest_agent_with_vss
="yes"
3577 QEMU_CFLAGS
="$QEMU_CFLAGS $vss_win32_include"
3578 libs_qga
="-lole32 -loleaut32 -lshlwapi -luuid -lstdc++ -Wl,--enable-stdcall-fixup $libs_qga"
3580 if test "$vss_win32_sdk" != "" ; then
3581 echo "ERROR: Please download and install Microsoft VSS SDK:"
3582 echo "ERROR: http://www.microsoft.com/en-us/download/details.aspx?id=23490"
3583 echo "ERROR: On POSIX-systems, you can extract the SDK headers by:"
3584 echo "ERROR: scripts/extract-vsssdk-headers setup.exe"
3585 echo "ERROR: The headers are extracted in the directory \`inc'."
3586 feature_not_found
"VSS support"
3588 guest_agent_with_vss
="no"
3592 ##########################################
3593 # lookup Windows platform SDK (if not specified)
3594 # The SDK is needed only to build .tlb (type library) file of guest agent
3595 # VSS provider from the source. It is usually unnecessary because the
3596 # pre-compiled .tlb file is included.
3598 if test "$mingw32" = "yes" -a "$guest_agent" != "no" -a "$guest_agent_with_vss" = "yes" ; then
3599 if test -z "$win_sdk"; then
3600 programfiles
="$PROGRAMFILES"
3601 test -n "$PROGRAMW6432" && programfiles
="$PROGRAMW6432"
3602 if test -n "$programfiles"; then
3603 win_sdk
=$
(ls -d "$programfiles/Microsoft SDKs/Windows/v"* |
tail -1) 2>/dev
/null
3605 feature_not_found
"Windows SDK"
3607 elif test "$win_sdk" = "no"; then
3612 ##########################################
3614 ##########################################
3615 # check if we have fdatasync
3621 #if defined(_POSIX_SYNCHRONIZED_IO) && _POSIX_SYNCHRONIZED_IO > 0
3622 return fdatasync(0);
3624 #error Not supported
3628 if compile_prog
"" "" ; then
3632 ##########################################
3633 # check if we have madvise
3637 #include <sys/types.h>
3638 #include <sys/mman.h>
3640 int main(void) { return madvise(NULL, 0, MADV_DONTNEED); }
3642 if compile_prog
"" "" ; then
3646 ##########################################
3647 # check if we have posix_madvise
3651 #include <sys/mman.h>
3653 int main(void) { return posix_madvise(NULL, 0, POSIX_MADV_DONTNEED); }
3655 if compile_prog
"" "" ; then
3659 ##########################################
3660 # check if we have usable SIGEV_THREAD_ID
3667 ev.sigev_notify = SIGEV_THREAD_ID;
3668 ev._sigev_un._tid = 0;
3669 asm volatile("" : : "g"(&ev));
3673 if compile_prog
"" "" ; then
3677 ##########################################
3678 # check if trace backend exists
3680 $python "$source_path/scripts/tracetool.py" "--backends=$trace_backends" --check-backends > /dev
/null
2> /dev
/null
3681 if test "$?" -ne 0 ; then
3682 error_exit
"invalid trace backends" \
3683 "Please choose supported trace backends."
3686 ##########################################
3687 # For 'ust' backend, test if ust headers are present
3688 if have_backend
"ust"; then
3690 #include <lttng/tracepoint.h>
3691 int main(void) { return 0; }
3693 if compile_prog
"" "" ; then
3694 if $pkg_config lttng-ust
--exists; then
3695 lttng_ust_libs
=`$pkg_config --libs lttng-ust`
3697 lttng_ust_libs
="-llttng-ust"
3699 if $pkg_config liburcu-bp
--exists; then
3700 urcu_bp_libs
=`$pkg_config --libs liburcu-bp`
3702 urcu_bp_libs
="-lurcu-bp"
3705 LIBS
="$lttng_ust_libs $urcu_bp_libs $LIBS"
3706 libs_qga
="$lttng_ust_libs $urcu_bp_libs $libs_qga"
3708 error_exit
"Trace backend 'ust' missing lttng-ust header files"
3712 ##########################################
3713 # For 'dtrace' backend, test if 'dtrace' command is present
3714 if have_backend
"dtrace"; then
3715 if ! has
'dtrace' ; then
3716 error_exit
"dtrace command is not found in PATH $PATH"
3718 trace_backend_stap
="no"
3719 if has
'stap' ; then
3720 trace_backend_stap
="yes"
3724 ##########################################
3725 # check and set a backend for coroutine
3727 # We prefer ucontext, but it's not always possible. The fallback
3728 # is sigcontext. gthread is not selectable except explicitly, because
3729 # it is not functional enough to run QEMU proper. (It is occasionally
3730 # useful for debugging purposes.) On Windows the only valid backend
3731 # is the Windows-specific one.
3734 if test "$darwin" != "yes"; then
3736 #include <ucontext.h>
3737 #ifdef __stub_makecontext
3738 #error Ignoring glibc stub makecontext which will always fail
3740 int main(void) { makecontext(0, 0, 0); return 0; }
3742 if compile_prog
"" "" ; then
3747 if test "$coroutine" = ""; then
3748 if test "$mingw32" = "yes"; then
3750 elif test "$ucontext_works" = "yes"; then
3753 coroutine
=sigaltstack
3758 if test "$mingw32" != "yes"; then
3759 error_exit
"'windows' coroutine backend only valid for Windows"
3761 # Unfortunately the user visible backend name doesn't match the
3762 # coroutine-*.c filename for this case, so we have to adjust it here.
3766 if test "$ucontext_works" != "yes"; then
3767 feature_not_found
"ucontext"
3770 gthread|sigaltstack
)
3771 if test "$mingw32" = "yes"; then
3772 error_exit
"only the 'windows' coroutine backend is valid for Windows"
3776 error_exit
"unknown coroutine backend $coroutine"
3781 if test "$coroutine_pool" = ""; then
3782 if test "$coroutine" = "gthread"; then
3788 if test "$coroutine" = "gthread" -a "$coroutine_pool" = "yes"; then
3789 error_exit
"'gthread' coroutine backend does not support pool (use --disable-coroutine-pool)"
3792 ##########################################
3793 # check if we have open_by_handle_at
3795 open_by_handle_at
=no
3798 #if !defined(AT_EMPTY_PATH)
3799 # error missing definition
3801 int main(void) { struct file_handle fh; return open_by_handle_at(0, &fh, 0); }
3804 if compile_prog
"" "" ; then
3805 open_by_handle_at
=yes
3808 ########################################
3809 # check if we have linux/magic.h
3813 #include <linux/magic.h>
3818 if compile_prog
"" "" ; then
3822 ########################################
3823 # check whether we can disable warning option with a pragma (this is needed
3824 # to silence warnings in the headers of some versions of external libraries).
3825 # This test has to be compiled with -Werror as otherwise an unknown pragma is
3828 # If we can't selectively disable warning in the code, disable -Werror so that
3829 # the build doesn't fail anyway.
3831 pragma_disable_unused_but_set
=no
3833 #pragma GCC diagnostic push
3834 #pragma GCC diagnostic ignored "-Wunused-but-set-variable"
3835 #pragma GCC diagnostic ignored "-Wstrict-prototypes"
3836 #pragma GCC diagnostic pop
3842 if compile_prog
"-Werror" "" ; then
3843 pragma_diagnostic_available
=yes
3848 ########################################
3849 # check if we have valgrind/valgrind.h and valgrind/memcheck.h
3853 #include <valgrind/valgrind.h>
3854 #include <valgrind/memcheck.h>
3859 if compile_prog
"" "" ; then
3863 ########################################
3864 # check if environ is declared
3874 if compile_prog
"" "" ; then
3878 ########################################
3879 # check if cpuid.h is usable.
3885 unsigned a, b, c, d;
3886 int max = __get_cpuid_max(0, 0);
3889 __cpuid(1, a, b, c, d);
3893 __cpuid_count(7, 0, a, b, c, d);
3899 if compile_prog
"" "" ; then
3903 ########################################
3904 # check if __[u]int128_t is usable.
3908 #if defined(__clang_major__) && defined(__clang_minor__)
3909 # if ((__clang_major__ < 3) || (__clang_major__ == 3) && (__clang_minor__ < 2))
3910 # error __int128_t does not work in CLANG before 3.2
3922 if compile_prog
"" "" ; then
3926 ########################################
3927 # check if getauxval is available.
3931 #include <sys/auxv.h>
3933 return getauxval(AT_HWCAP) == 0;
3936 if compile_prog
"" "" ; then
3940 ##########################################
3942 # After here, no more $cc or $ld runs
3944 if test "$gcov" = "yes" ; then
3945 CFLAGS
="-fprofile-arcs -ftest-coverage -g $CFLAGS"
3946 LDFLAGS
="-fprofile-arcs -ftest-coverage $LDFLAGS"
3947 elif test "$debug" = "no" ; then
3948 CFLAGS
="-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 $CFLAGS"
3951 ##########################################
3953 if test "$libnfs" != "no" ; then
3954 if $pkg_config --atleast-version=1.9.3 libnfs
; then
3956 libnfs_libs
=$
($pkg_config --libs libnfs
)
3957 LIBS
="$LIBS $libnfs_libs"
3959 if test "$libnfs" = "yes" ; then
3960 feature_not_found
"libnfs"
3966 # Disable zero malloc errors for official releases unless explicitly told to
3968 if test -z "$zero_malloc" ; then
3969 if test "$z_version" = "50" ; then
3976 # Now we've finished running tests it's OK to add -Werror to the compiler flags
3977 if test "$werror" = "yes"; then
3978 QEMU_CFLAGS
="-Werror $QEMU_CFLAGS"
3981 if test "$solaris" = "no" ; then
3982 if $ld --version 2>/dev
/null |
grep "GNU ld" >/dev
/null
2>/dev
/null
; then
3983 LDFLAGS
="-Wl,--warn-common $LDFLAGS"
3987 # test if pod2man has --utf8 option
3988 if pod2man
--help |
grep -q utf8
; then
3989 POD2MAN
="pod2man --utf8"
3994 # Use ASLR, no-SEH and DEP if available
3995 if test "$mingw32" = "yes" ; then
3996 for flag
in --dynamicbase --no-seh --nxcompat; do
3997 if $ld --help 2>/dev
/null |
grep ".$flag" >/dev
/null
2>/dev
/null
; then
3998 LDFLAGS
="-Wl,$flag $LDFLAGS"
4003 qemu_confdir
=$sysconfdir$confsuffix
4004 qemu_moddir
=$libdir$confsuffix
4005 qemu_datadir
=$datadir$confsuffix
4006 qemu_localedir
="$datadir/locale"
4009 if test "$want_tools" = "yes" ; then
4010 tools
="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools"
4011 if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
4012 tools
="qemu-nbd\$(EXESUF) $tools"
4015 if test "$softmmu" = yes ; then
4016 if test "$virtfs" != no
; then
4017 if test "$cap" = yes && test "$linux" = yes && test "$attr" = yes ; then
4019 tools
="$tools fsdev/virtfs-proxy-helper\$(EXESUF)"
4021 if test "$virtfs" = yes; then
4022 error_exit
"VirtFS is supported only on Linux and requires libcap-devel and libattr-devel"
4028 if [ "$guest_agent" != "no" ]; then
4029 if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" -o "$mingw32" = "yes" ] ; then
4030 tools
="qemu-ga\$(EXESUF) $tools"
4031 if [ "$mingw32" = "yes" -a "$guest_agent_with_vss" = "yes" ]; then
4032 tools
="qga/vss-win32/qga-vss.dll qga/vss-win32/qga-vss.tlb $tools"
4035 elif [ "$guest_agent" != yes ]; then
4038 error_exit
"Guest agent is not supported on this platform"
4042 # Mac OS X ships with a broken assembler
4044 if test \
( "$cpu" = "i386" -o "$cpu" = "x86_64" \
) -a \
4045 "$targetos" != "Darwin" -a "$targetos" != "SunOS" -a \
4046 "$softmmu" = yes ; then
4049 if test "$cpu" = "ppc64" -a "$targetos" != "Darwin" ; then
4050 roms
="$roms spapr-rtas"
4053 if test "$cpu" = "s390x" ; then
4054 roms
="$roms s390-ccw"
4057 # Probe for the need for relocating the user-only binary.
4058 if test "$pie" = "no" ; then
4061 arm | i386 | ppc
* | s390
* | sparc
* | x86_64 | x32
)
4062 # ??? Rationale for choosing this address
4063 textseg_addr
=0x60000000
4066 # A 256M aligned address, high in the address space, with enough
4067 # room for the code_gen_buffer above it before the stack.
4068 textseg_addr
=0x60000000
4071 if [ -n "$textseg_addr" ]; then
4073 int main(void) { return 0; }
4075 textseg_ldflags
="-Wl,-Ttext-segment=$textseg_addr"
4076 if ! compile_prog
"" "$textseg_ldflags"; then
4077 # In case ld does not support -Ttext-segment, edit the default linker
4078 # script via sed to set the .text start addr. This is needed on FreeBSD
4080 $ld --verbose |
sed \
4081 -e '1,/==================================================/d' \
4082 -e '/==================================================/,$d' \
4083 -e "s/[.] = [0-9a-fx]* [+] SIZEOF_HEADERS/. = $textseg_addr + SIZEOF_HEADERS/" \
4084 -e "s/__executable_start = [0-9a-fx]*/__executable_start = $textseg_addr/" > config-host.ld
4085 textseg_ldflags
="-Wl,-T../config-host.ld"
4090 # add pixman flags after all config tests are done
4091 QEMU_CFLAGS
="$QEMU_CFLAGS $pixman_cflags $fdt_cflags"
4092 libs_softmmu
="$libs_softmmu $pixman_libs"
4094 echo "Install prefix $prefix"
4095 echo "BIOS directory `eval echo $qemu_datadir`"
4096 echo "binary directory `eval echo $bindir`"
4097 echo "library directory `eval echo $libdir`"
4098 echo "module directory `eval echo $qemu_moddir`"
4099 echo "libexec directory `eval echo $libexecdir`"
4100 echo "include directory `eval echo $includedir`"
4101 echo "config directory `eval echo $sysconfdir`"
4102 if test "$mingw32" = "no" ; then
4103 echo "local state directory `eval echo $local_statedir`"
4104 echo "Manual directory `eval echo $mandir`"
4105 echo "ELF interp prefix $interp_prefix"
4107 echo "local state directory queried at runtime"
4108 echo "Windows SDK $win_sdk"
4110 echo "Source path $source_path"
4111 echo "C compiler $cc"
4112 echo "Host C compiler $host_cc"
4113 echo "C++ compiler $cxx"
4114 echo "Objective-C compiler $objcc"
4115 echo "ARFLAGS $ARFLAGS"
4116 echo "CFLAGS $CFLAGS"
4117 echo "QEMU_CFLAGS $QEMU_CFLAGS"
4118 echo "LDFLAGS $LDFLAGS"
4120 echo "install $install"
4121 echo "python $python"
4122 if test "$slirp" = "yes" ; then
4125 echo "module support $modules"
4126 echo "host CPU $cpu"
4127 echo "host big endian $bigendian"
4128 echo "target list $target_list"
4129 echo "tcg debug enabled $debug_tcg"
4130 echo "gprof enabled $gprof"
4131 echo "sparse enabled $sparse"
4132 echo "strip binaries $strip_opt"
4133 echo "profiler $profiler"
4134 echo "static build $static"
4135 if test "$darwin" = "yes" ; then
4136 echo "Cocoa support $cocoa"
4138 echo "pixman $pixman"
4139 echo "SDL support $sdl"
4140 echo "GTK support $gtk"
4141 echo "VTE support $vte"
4142 echo "curses support $curses"
4143 echo "curl support $curl"
4144 echo "mingw32 support $mingw32"
4145 echo "Audio drivers $audio_drv_list"
4146 echo "Block whitelist (rw) $block_drv_rw_whitelist"
4147 echo "Block whitelist (ro) $block_drv_ro_whitelist"
4148 echo "VirtFS support $virtfs"
4149 echo "VNC support $vnc"
4150 if test "$vnc" = "yes" ; then
4151 echo "VNC TLS support $vnc_tls"
4152 echo "VNC SASL support $vnc_sasl"
4153 echo "VNC JPEG support $vnc_jpeg"
4154 echo "VNC PNG support $vnc_png"
4155 echo "VNC WS support $vnc_ws"
4157 if test -n "$sparc_cpu"; then
4158 echo "Target Sparc Arch $sparc_cpu"
4160 echo "xen support $xen"
4161 echo "brlapi support $brlapi"
4162 echo "bluez support $bluez"
4163 echo "Documentation $docs"
4164 echo "GUEST_BASE $guest_base"
4166 echo "vde support $vde"
4167 echo "netmap support $netmap"
4168 echo "Linux AIO support $linux_aio"
4169 echo "ATTR/XATTR support $attr"
4170 echo "Install blobs $blobs"
4171 echo "KVM support $kvm"
4172 echo "RDMA support $rdma"
4173 echo "TCG interpreter $tcg_interpreter"
4174 echo "fdt support $fdt"
4175 echo "preadv support $preadv"
4176 echo "fdatasync $fdatasync"
4177 echo "madvise $madvise"
4178 echo "posix_madvise $posix_madvise"
4179 echo "sigev_thread_id $sigev_thread_id"
4180 echo "uuid support $uuid"
4181 echo "libcap-ng support $cap_ng"
4182 echo "vhost-net support $vhost_net"
4183 echo "vhost-scsi support $vhost_scsi"
4184 echo "Trace backends $trace_backends"
4185 if test "$trace_backend" = "simple"; then
4186 echo "Trace output file $trace_file-<pid>"
4188 if test "$spice" = "yes"; then
4189 echo "spice support $spice ($spice_protocol_version/$spice_server_version)"
4191 echo "spice support $spice"
4193 echo "rbd support $rbd"
4194 echo "xfsctl support $xfs"
4195 echo "nss used $smartcard_nss"
4196 echo "libusb $libusb"
4197 echo "usb net redir $usb_redir"
4198 echo "GLX support $glx"
4199 if test "$libiscsi_version" = "1.4.0"; then
4200 echo "libiscsi support $libiscsi (1.4.0)"
4202 echo "libiscsi support $libiscsi"
4204 echo "libnfs support $libnfs"
4205 echo "build guest agent $guest_agent"
4206 echo "QGA VSS support $guest_agent_with_vss"
4207 echo "seccomp support $seccomp"
4208 echo "coroutine backend $coroutine"
4209 echo "coroutine pool $coroutine_pool"
4210 echo "GlusterFS support $glusterfs"
4211 echo "virtio-blk-data-plane $virtio_blk_data_plane"
4212 echo "gcov $gcov_tool"
4213 echo "gcov enabled $gcov"
4214 echo "TPM support $tpm"
4215 echo "libssh2 support $libssh2"
4216 echo "TPM passthrough $tpm_passthrough"
4217 echo "QOM debugging $qom_cast_debug"
4219 echo "Quorum $quorum"
4220 echo "lzo support $lzo"
4221 echo "snappy support $snappy"
4223 if test "$sdl_too_old" = "yes"; then
4224 echo "-> Your SDL version is too old - please upgrade to have SDL support"
4227 config_host_mak
="config-host.mak"
4229 echo "# Automatically generated by configure - do not modify" >config-all-disas.mak
4231 echo "# Automatically generated by configure - do not modify" > $config_host_mak
4232 echo >> $config_host_mak
4234 echo all
: >> $config_host_mak
4235 echo "prefix=$prefix" >> $config_host_mak
4236 echo "bindir=$bindir" >> $config_host_mak
4237 echo "libdir=$libdir" >> $config_host_mak
4238 echo "libexecdir=$libexecdir" >> $config_host_mak
4239 echo "includedir=$includedir" >> $config_host_mak
4240 echo "mandir=$mandir" >> $config_host_mak
4241 echo "sysconfdir=$sysconfdir" >> $config_host_mak
4242 echo "qemu_confdir=$qemu_confdir" >> $config_host_mak
4243 echo "qemu_datadir=$qemu_datadir" >> $config_host_mak
4244 echo "qemu_docdir=$qemu_docdir" >> $config_host_mak
4245 echo "qemu_moddir=$qemu_moddir" >> $config_host_mak
4246 if test "$mingw32" = "no" ; then
4247 echo "qemu_localstatedir=$local_statedir" >> $config_host_mak
4249 echo "qemu_helperdir=$libexecdir" >> $config_host_mak
4250 echo "extra_cflags=$EXTRA_CFLAGS" >> $config_host_mak
4251 echo "extra_ldflags=$EXTRA_LDFLAGS" >> $config_host_mak
4252 echo "qemu_localedir=$qemu_localedir" >> $config_host_mak
4253 echo "libs_softmmu=$libs_softmmu" >> $config_host_mak
4255 echo "ARCH=$ARCH" >> $config_host_mak
4257 if test "$debug_tcg" = "yes" ; then
4258 echo "CONFIG_DEBUG_TCG=y" >> $config_host_mak
4260 if test "$strip_opt" = "yes" ; then
4261 echo "STRIP=${strip}" >> $config_host_mak
4263 if test "$bigendian" = "yes" ; then
4264 echo "HOST_WORDS_BIGENDIAN=y" >> $config_host_mak
4266 if test "$mingw32" = "yes" ; then
4267 echo "CONFIG_WIN32=y" >> $config_host_mak
4268 rc_version
=`cat $source_path/VERSION`
4269 version_major
=${rc_version%%.*}
4270 rc_version
=${rc_version#*.}
4271 version_minor
=${rc_version%%.*}
4272 rc_version
=${rc_version#*.}
4273 version_subminor
=${rc_version%%.*}
4275 echo "CONFIG_FILEVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
4276 echo "CONFIG_PRODUCTVERSION=$version_major,$version_minor,$version_subminor,$version_micro" >> $config_host_mak
4277 if test "$guest_agent_with_vss" = "yes" ; then
4278 echo "CONFIG_QGA_VSS=y" >> $config_host_mak
4279 echo "WIN_SDK=\"$win_sdk\"" >> $config_host_mak
4282 echo "CONFIG_POSIX=y" >> $config_host_mak
4285 if test "$linux" = "yes" ; then
4286 echo "CONFIG_LINUX=y" >> $config_host_mak
4289 if test "$darwin" = "yes" ; then
4290 echo "CONFIG_DARWIN=y" >> $config_host_mak
4293 if test "$aix" = "yes" ; then
4294 echo "CONFIG_AIX=y" >> $config_host_mak
4297 if test "$solaris" = "yes" ; then
4298 echo "CONFIG_SOLARIS=y" >> $config_host_mak
4299 echo "CONFIG_SOLARIS_VERSION=$solarisrev" >> $config_host_mak
4300 if test "$needs_libsunmath" = "yes" ; then
4301 echo "CONFIG_NEEDS_LIBSUNMATH=y" >> $config_host_mak
4304 if test "$haiku" = "yes" ; then
4305 echo "CONFIG_HAIKU=y" >> $config_host_mak
4307 if test "$static" = "yes" ; then
4308 echo "CONFIG_STATIC=y" >> $config_host_mak
4310 if test "$profiler" = "yes" ; then
4311 echo "CONFIG_PROFILER=y" >> $config_host_mak
4313 if test "$slirp" = "yes" ; then
4314 echo "CONFIG_SLIRP=y" >> $config_host_mak
4315 echo "CONFIG_SMBD_COMMAND=\"$smbd\"" >> $config_host_mak
4317 if test "$vde" = "yes" ; then
4318 echo "CONFIG_VDE=y" >> $config_host_mak
4320 if test "$netmap" = "yes" ; then
4321 echo "CONFIG_NETMAP=y" >> $config_host_mak
4323 if test "$cap_ng" = "yes" ; then
4324 echo "CONFIG_LIBCAP=y" >> $config_host_mak
4326 echo "CONFIG_AUDIO_DRIVERS=$audio_drv_list" >> $config_host_mak
4327 for drv
in $audio_drv_list; do
4328 def
=CONFIG_
`echo $drv | LC_ALL=C tr '[a-z]' '[A-Z]'`
4329 echo "$def=y" >> $config_host_mak
4330 if test "$drv" = "fmod"; then
4331 echo "FMOD_CFLAGS=-I$fmod_inc" >> $config_host_mak
4334 if test "$audio_pt_int" = "yes" ; then
4335 echo "CONFIG_AUDIO_PT_INT=y" >> $config_host_mak
4337 if test "$audio_win_int" = "yes" ; then
4338 echo "CONFIG_AUDIO_WIN_INT=y" >> $config_host_mak
4340 echo "CONFIG_BDRV_RW_WHITELIST=$block_drv_rw_whitelist" >> $config_host_mak
4341 echo "CONFIG_BDRV_RO_WHITELIST=$block_drv_ro_whitelist" >> $config_host_mak
4342 if test "$vnc" = "yes" ; then
4343 echo "CONFIG_VNC=y" >> $config_host_mak
4345 if test "$vnc_tls" = "yes" ; then
4346 echo "CONFIG_VNC_TLS=y" >> $config_host_mak
4348 if test "$vnc_sasl" = "yes" ; then
4349 echo "CONFIG_VNC_SASL=y" >> $config_host_mak
4351 if test "$vnc_jpeg" = "yes" ; then
4352 echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
4354 if test "$vnc_png" = "yes" ; then
4355 echo "CONFIG_VNC_PNG=y" >> $config_host_mak
4357 if test "$vnc_ws" = "yes" ; then
4358 echo "CONFIG_VNC_WS=y" >> $config_host_mak
4359 echo "VNC_WS_CFLAGS=$vnc_ws_cflags" >> $config_host_mak
4361 if test "$fnmatch" = "yes" ; then
4362 echo "CONFIG_FNMATCH=y" >> $config_host_mak
4364 if test "$uuid" = "yes" ; then
4365 echo "CONFIG_UUID=y" >> $config_host_mak
4367 if test "$xfs" = "yes" ; then
4368 echo "CONFIG_XFS=y" >> $config_host_mak
4370 qemu_version
=`head $source_path/VERSION`
4371 echo "VERSION=$qemu_version" >>$config_host_mak
4372 echo "PKGVERSION=$pkgversion" >>$config_host_mak
4373 echo "SRC_PATH=$source_path" >> $config_host_mak
4374 echo "TARGET_DIRS=$target_list" >> $config_host_mak
4375 if [ "$docs" = "yes" ] ; then
4376 echo "BUILD_DOCS=yes" >> $config_host_mak
4378 if test "$modules" = "yes"; then
4379 # $shacmd can generate a hash started with digit, which the compiler doesn't
4380 # like as an symbol. So prefix it with an underscore
4381 echo "CONFIG_STAMP=_`(echo $qemu_version; echo $pkgversion; cat $0) | $shacmd - | cut -f1 -d\ `" >> $config_host_mak
4382 echo "CONFIG_MODULES=y" >> $config_host_mak
4384 if test "$sdl" = "yes" ; then
4385 echo "CONFIG_SDL=y" >> $config_host_mak
4386 echo "CONFIG_SDLABI=$sdlabi" >> $config_host_mak
4387 echo "SDL_CFLAGS=$sdl_cflags" >> $config_host_mak
4389 if test "$cocoa" = "yes" ; then
4390 echo "CONFIG_COCOA=y" >> $config_host_mak
4392 if test "$curses" = "yes" ; then
4393 echo "CONFIG_CURSES=y" >> $config_host_mak
4395 if test "$utimens" = "yes" ; then
4396 echo "CONFIG_UTIMENSAT=y" >> $config_host_mak
4398 if test "$pipe2" = "yes" ; then
4399 echo "CONFIG_PIPE2=y" >> $config_host_mak
4401 if test "$accept4" = "yes" ; then
4402 echo "CONFIG_ACCEPT4=y" >> $config_host_mak
4404 if test "$splice" = "yes" ; then
4405 echo "CONFIG_SPLICE=y" >> $config_host_mak
4407 if test "$eventfd" = "yes" ; then
4408 echo "CONFIG_EVENTFD=y" >> $config_host_mak
4410 if test "$fallocate" = "yes" ; then
4411 echo "CONFIG_FALLOCATE=y" >> $config_host_mak
4413 if test "$fallocate_punch_hole" = "yes" ; then
4414 echo "CONFIG_FALLOCATE_PUNCH_HOLE=y" >> $config_host_mak
4416 if test "$sync_file_range" = "yes" ; then
4417 echo "CONFIG_SYNC_FILE_RANGE=y" >> $config_host_mak
4419 if test "$fiemap" = "yes" ; then
4420 echo "CONFIG_FIEMAP=y" >> $config_host_mak
4422 if test "$dup3" = "yes" ; then
4423 echo "CONFIG_DUP3=y" >> $config_host_mak
4425 if test "$ppoll" = "yes" ; then
4426 echo "CONFIG_PPOLL=y" >> $config_host_mak
4428 if test "$prctl_pr_set_timerslack" = "yes" ; then
4429 echo "CONFIG_PRCTL_PR_SET_TIMERSLACK=y" >> $config_host_mak
4431 if test "$epoll" = "yes" ; then
4432 echo "CONFIG_EPOLL=y" >> $config_host_mak
4434 if test "$epoll_create1" = "yes" ; then
4435 echo "CONFIG_EPOLL_CREATE1=y" >> $config_host_mak
4437 if test "$epoll_pwait" = "yes" ; then
4438 echo "CONFIG_EPOLL_PWAIT=y" >> $config_host_mak
4440 if test "$sendfile" = "yes" ; then
4441 echo "CONFIG_SENDFILE=y" >> $config_host_mak
4443 if test "$inotify" = "yes" ; then
4444 echo "CONFIG_INOTIFY=y" >> $config_host_mak
4446 if test "$inotify1" = "yes" ; then
4447 echo "CONFIG_INOTIFY1=y" >> $config_host_mak
4449 if test "$byteswap_h" = "yes" ; then
4450 echo "CONFIG_BYTESWAP_H=y" >> $config_host_mak
4452 if test "$bswap_h" = "yes" ; then
4453 echo "CONFIG_MACHINE_BSWAP_H=y" >> $config_host_mak
4455 if test "$curl" = "yes" ; then
4456 echo "CONFIG_CURL=m" >> $config_host_mak
4457 echo "CURL_CFLAGS=$curl_cflags" >> $config_host_mak
4458 echo "CURL_LIBS=$curl_libs" >> $config_host_mak
4460 if test "$brlapi" = "yes" ; then
4461 echo "CONFIG_BRLAPI=y" >> $config_host_mak
4463 if test "$bluez" = "yes" ; then
4464 echo "CONFIG_BLUEZ=y" >> $config_host_mak
4465 echo "BLUEZ_CFLAGS=$bluez_cflags" >> $config_host_mak
4467 echo "GLIB_CFLAGS=$glib_cflags" >> $config_host_mak
4468 if test "$gtk" = "yes" ; then
4469 echo "CONFIG_GTK=y" >> $config_host_mak
4470 echo "CONFIG_GTKABI=$gtkabi" >> $config_host_mak
4471 echo "GTK_CFLAGS=$gtk_cflags" >> $config_host_mak
4473 if test "$vte" = "yes" ; then
4474 echo "CONFIG_VTE=y" >> $config_host_mak
4475 echo "VTE_CFLAGS=$vte_cflags" >> $config_host_mak
4477 if test "$xen" = "yes" ; then
4478 echo "CONFIG_XEN_BACKEND=y" >> $config_host_mak
4479 echo "CONFIG_XEN_CTRL_INTERFACE_VERSION=$xen_ctrl_version" >> $config_host_mak
4481 if test "$linux_aio" = "yes" ; then
4482 echo "CONFIG_LINUX_AIO=y" >> $config_host_mak
4484 if test "$attr" = "yes" ; then
4485 echo "CONFIG_ATTR=y" >> $config_host_mak
4487 if test "$libattr" = "yes" ; then
4488 echo "CONFIG_LIBATTR=y" >> $config_host_mak
4490 if test "$virtfs" = "yes" ; then
4491 echo "CONFIG_VIRTFS=y" >> $config_host_mak
4493 if test "$vhost_scsi" = "yes" ; then
4494 echo "CONFIG_VHOST_SCSI=y" >> $config_host_mak
4496 if test "$blobs" = "yes" ; then
4497 echo "INSTALL_BLOBS=yes" >> $config_host_mak
4499 if test "$iovec" = "yes" ; then
4500 echo "CONFIG_IOVEC=y" >> $config_host_mak
4502 if test "$preadv" = "yes" ; then
4503 echo "CONFIG_PREADV=y" >> $config_host_mak
4505 if test "$fdt" = "yes" ; then
4506 echo "CONFIG_FDT=y" >> $config_host_mak
4508 if test "$signalfd" = "yes" ; then
4509 echo "CONFIG_SIGNALFD=y" >> $config_host_mak
4511 if test "$tcg_interpreter" = "yes" ; then
4512 echo "CONFIG_TCG_INTERPRETER=y" >> $config_host_mak
4514 if test "$fdatasync" = "yes" ; then
4515 echo "CONFIG_FDATASYNC=y" >> $config_host_mak
4517 if test "$madvise" = "yes" ; then
4518 echo "CONFIG_MADVISE=y" >> $config_host_mak
4520 if test "$posix_madvise" = "yes" ; then
4521 echo "CONFIG_POSIX_MADVISE=y" >> $config_host_mak
4523 if test "$sigev_thread_id" = "yes" ; then
4524 echo "CONFIG_SIGEV_THREAD_ID=y" >> $config_host_mak
4527 if test "$spice" = "yes" ; then
4528 echo "CONFIG_SPICE=y" >> $config_host_mak
4531 if test "$smartcard_nss" = "yes" ; then
4532 echo "CONFIG_SMARTCARD_NSS=y" >> $config_host_mak
4533 echo "NSS_LIBS=$nss_libs" >> $config_host_mak
4534 echo "NSS_CFLAGS=$nss_cflags" >> $config_host_mak
4537 if test "$libusb" = "yes" ; then
4538 echo "CONFIG_USB_LIBUSB=y" >> $config_host_mak
4541 if test "$usb_redir" = "yes" ; then
4542 echo "CONFIG_USB_REDIR=y" >> $config_host_mak
4545 if test "$glx" = "yes" ; then
4546 echo "CONFIG_GLX=y" >> $config_host_mak
4547 echo "GLX_LIBS=$glx_libs" >> $config_host_mak
4550 if test "$lzo" = "yes" ; then
4551 echo "CONFIG_LZO=y" >> $config_host_mak
4554 if test "$snappy" = "yes" ; then
4555 echo "CONFIG_SNAPPY=y" >> $config_host_mak
4558 if test "$libiscsi" = "yes" ; then
4559 echo "CONFIG_LIBISCSI=m" >> $config_host_mak
4560 if test "$libiscsi_version" = "1.4.0"; then
4561 echo "CONFIG_LIBISCSI_1_4=y" >> $config_host_mak
4563 echo "LIBISCSI_CFLAGS=$libiscsi_cflags" >> $config_host_mak
4564 echo "LIBISCSI_LIBS=$libiscsi_libs" >> $config_host_mak
4567 if test "$libnfs" = "yes" ; then
4568 echo "CONFIG_LIBNFS=y" >> $config_host_mak
4571 if test "$seccomp" = "yes"; then
4572 echo "CONFIG_SECCOMP=y" >> $config_host_mak
4575 # XXX: suppress that
4576 if [ "$bsd" = "yes" ] ; then
4577 echo "CONFIG_BSD=y" >> $config_host_mak
4580 if test "$zero_malloc" = "yes" ; then
4581 echo "CONFIG_ZERO_MALLOC=y" >> $config_host_mak
4583 if test "$qom_cast_debug" = "yes" ; then
4584 echo "CONFIG_QOM_CAST_DEBUG=y" >> $config_host_mak
4586 if test "$rbd" = "yes" ; then
4587 echo "CONFIG_RBD=m" >> $config_host_mak
4588 echo "RBD_CFLAGS=$rbd_cflags" >> $config_host_mak
4589 echo "RBD_LIBS=$rbd_libs" >> $config_host_mak
4592 echo "CONFIG_COROUTINE_BACKEND=$coroutine" >> $config_host_mak
4593 if test "$coroutine_pool" = "yes" ; then
4594 echo "CONFIG_COROUTINE_POOL=1" >> $config_host_mak
4596 echo "CONFIG_COROUTINE_POOL=0" >> $config_host_mak
4599 if test "$open_by_handle_at" = "yes" ; then
4600 echo "CONFIG_OPEN_BY_HANDLE=y" >> $config_host_mak
4603 if test "$linux_magic_h" = "yes" ; then
4604 echo "CONFIG_LINUX_MAGIC_H=y" >> $config_host_mak
4607 if test "$pragma_diagnostic_available" = "yes" ; then
4608 echo "CONFIG_PRAGMA_DIAGNOSTIC_AVAILABLE=y" >> $config_host_mak
4611 if test "$valgrind_h" = "yes" ; then
4612 echo "CONFIG_VALGRIND_H=y" >> $config_host_mak
4615 if test "$has_environ" = "yes" ; then
4616 echo "CONFIG_HAS_ENVIRON=y" >> $config_host_mak
4619 if test "$cpuid_h" = "yes" ; then
4620 echo "CONFIG_CPUID_H=y" >> $config_host_mak
4623 if test "$int128" = "yes" ; then
4624 echo "CONFIG_INT128=y" >> $config_host_mak
4627 if test "$getauxval" = "yes" ; then
4628 echo "CONFIG_GETAUXVAL=y" >> $config_host_mak
4631 if test "$glusterfs" = "yes" ; then
4632 echo "CONFIG_GLUSTERFS=m" >> $config_host_mak
4633 echo "GLUSTERFS_CFLAGS=$glusterfs_cflags" >> $config_host_mak
4634 echo "GLUSTERFS_LIBS=$glusterfs_libs" >> $config_host_mak
4637 if test "$glusterfs_discard" = "yes" ; then
4638 echo "CONFIG_GLUSTERFS_DISCARD=y" >> $config_host_mak
4641 if test "$glusterfs_zerofill" = "yes" ; then
4642 echo "CONFIG_GLUSTERFS_ZEROFILL=y" >> $config_host_mak
4645 if test "$libssh2" = "yes" ; then
4646 echo "CONFIG_LIBSSH2=m" >> $config_host_mak
4647 echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
4648 echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
4651 if test "$quorum" = "yes" ; then
4652 echo "CONFIG_QUORUM=y" >> $config_host_mak
4655 if test "$virtio_blk_data_plane" = "yes" ; then
4656 echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
4659 if test "$vhdx" = "yes" ; then
4660 echo "CONFIG_VHDX=y" >> $config_host_mak
4664 if test "$libusb" = "yes"; then
4665 echo "HOST_USB=libusb legacy" >> $config_host_mak
4667 echo "HOST_USB=stub" >> $config_host_mak
4670 # TPM passthrough support?
4671 if test "$tpm" = "yes"; then
4672 echo 'CONFIG_TPM=$(CONFIG_SOFTMMU)' >> $config_host_mak
4673 if test "$tpm_passthrough" = "yes"; then
4674 echo "CONFIG_TPM_PASSTHROUGH=y" >> $config_host_mak
4678 echo "TRACE_BACKENDS=$trace_backends" >> $config_host_mak
4679 if have_backend
"nop"; then
4680 echo "CONFIG_TRACE_NOP=y" >> $config_host_mak
4682 if have_backend
"simple"; then
4683 echo "CONFIG_TRACE_SIMPLE=y" >> $config_host_mak
4684 # Set the appropriate trace file.
4685 trace_file
="\"$trace_file-\" FMT_pid"
4687 if have_backend
"stderr"; then
4688 echo "CONFIG_TRACE_STDERR=y" >> $config_host_mak
4690 if have_backend
"ust"; then
4691 echo "CONFIG_TRACE_UST=y" >> $config_host_mak
4693 if have_backend
"dtrace"; then
4694 echo "CONFIG_TRACE_DTRACE=y" >> $config_host_mak
4695 if test "$trace_backend_stap" = "yes" ; then
4696 echo "CONFIG_TRACE_SYSTEMTAP=y" >> $config_host_mak
4699 if have_backend
"ftrace"; then
4700 if test "$linux" = "yes" ; then
4701 echo "CONFIG_TRACE_FTRACE=y" >> $config_host_mak
4703 feature_not_found
"ftrace(trace backend)" "ftrace requires Linux"
4706 echo "CONFIG_TRACE_FILE=$trace_file" >> $config_host_mak
4708 if test "$rdma" = "yes" ; then
4709 echo "CONFIG_RDMA=y" >> $config_host_mak
4712 # Hold two types of flag:
4713 # CONFIG_THREAD_SETNAME_BYTHREAD - we've got a way of setting the name on
4714 # a thread we have a handle to
4715 # CONFIG_PTHREAD_SETNAME_NP - A way of doing it on a particular
4717 if test "$pthread_setname_np" = "yes" ; then
4718 echo "CONFIG_THREAD_SETNAME_BYTHREAD=y" >> $config_host_mak
4719 echo "CONFIG_PTHREAD_SETNAME_NP=y" >> $config_host_mak
4722 if test "$tcg_interpreter" = "yes"; then
4723 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/tci $QEMU_INCLUDES"
4724 elif test "$ARCH" = "sparc64" ; then
4725 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/sparc $QEMU_INCLUDES"
4726 elif test "$ARCH" = "s390x" ; then
4727 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/s390 $QEMU_INCLUDES"
4728 elif test "$ARCH" = "x86_64" -o "$ARCH" = "x32" ; then
4729 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/i386 $QEMU_INCLUDES"
4731 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg/\$(ARCH) $QEMU_INCLUDES"
4733 QEMU_INCLUDES
="-I\$(SRC_PATH)/tcg $QEMU_INCLUDES"
4735 echo "TOOLS=$tools" >> $config_host_mak
4736 echo "ROMS=$roms" >> $config_host_mak
4737 echo "MAKE=$make" >> $config_host_mak
4738 echo "INSTALL=$install" >> $config_host_mak
4739 echo "INSTALL_DIR=$install -d -m 0755" >> $config_host_mak
4740 echo "INSTALL_DATA=$install -c -m 0644" >> $config_host_mak
4741 if test -n "$libtool"; then
4742 echo "INSTALL_PROG=\$(LIBTOOL) --mode=install $install -c -m 0755" >> $config_host_mak
4743 echo "INSTALL_LIB=\$(LIBTOOL) --mode=install $install -c -m 0644" >> $config_host_mak
4745 echo "INSTALL_PROG=$install -c -m 0755" >> $config_host_mak
4746 echo "INSTALL_LIB=$install -c -m 0644" >> $config_host_mak
4748 echo "PYTHON=$python" >> $config_host_mak
4749 echo "CC=$cc" >> $config_host_mak
4750 if $iasl -h > /dev
/null
2>&1; then
4751 echo "IASL=$iasl" >> $config_host_mak
4753 echo "CC_I386=$cc_i386" >> $config_host_mak
4754 echo "HOST_CC=$host_cc" >> $config_host_mak
4755 echo "CXX=$cxx" >> $config_host_mak
4756 echo "OBJCC=$objcc" >> $config_host_mak
4757 echo "AR=$ar" >> $config_host_mak
4758 echo "ARFLAGS=$ARFLAGS" >> $config_host_mak
4759 echo "AS=$as" >> $config_host_mak
4760 echo "CPP=$cpp" >> $config_host_mak
4761 echo "OBJCOPY=$objcopy" >> $config_host_mak
4762 echo "LD=$ld" >> $config_host_mak
4763 echo "WINDRES=$windres" >> $config_host_mak
4764 echo "LIBTOOL=$libtool" >> $config_host_mak
4765 echo "CFLAGS=$CFLAGS" >> $config_host_mak
4766 echo "CFLAGS_NOPIE=$CFLAGS_NOPIE" >> $config_host_mak
4767 echo "QEMU_CFLAGS=$QEMU_CFLAGS" >> $config_host_mak
4768 echo "QEMU_INCLUDES=$QEMU_INCLUDES" >> $config_host_mak
4769 if test "$sparse" = "yes" ; then
4770 echo "CC := REAL_CC=\"\$(CC)\" cgcc" >> $config_host_mak
4771 echo "HOST_CC := REAL_CC=\"\$(HOST_CC)\" cgcc" >> $config_host_mak
4772 echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak
4774 if test "$cross_prefix" != ""; then
4775 echo "AUTOCONF_HOST := --host=${cross_prefix%-}" >> $config_host_mak
4777 echo "AUTOCONF_HOST := " >> $config_host_mak
4779 echo "LDFLAGS=$LDFLAGS" >> $config_host_mak
4780 echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak
4781 echo "LIBTOOLFLAGS=$LIBTOOLFLAGS" >> $config_host_mak
4782 echo "LIBS+=$LIBS" >> $config_host_mak
4783 echo "LIBS_TOOLS+=$libs_tools" >> $config_host_mak
4784 echo "EXESUF=$EXESUF" >> $config_host_mak
4785 echo "DSOSUF=$DSOSUF" >> $config_host_mak
4786 echo "LDFLAGS_SHARED=$LDFLAGS_SHARED" >> $config_host_mak
4787 echo "LIBS_QGA+=$libs_qga" >> $config_host_mak
4788 echo "POD2MAN=$POD2MAN" >> $config_host_mak
4789 echo "TRANSLATE_OPT_CFLAGS=$TRANSLATE_OPT_CFLAGS" >> $config_host_mak
4790 if test "$gcov" = "yes" ; then
4791 echo "CONFIG_GCOV=y" >> $config_host_mak
4792 echo "GCOV=$gcov_tool" >> $config_host_mak
4795 # use included Linux headers
4796 if test "$linux" = "yes" ; then
4797 mkdir
-p linux-headers
4812 # For most CPUs the kernel architecture name and QEMU CPU name match.
4816 # For non-KVM architectures we will not have asm headers
4817 if [ -e "$source_path/linux-headers/asm-$linux_arch" ]; then
4818 symlink
"$source_path/linux-headers/asm-$linux_arch" linux-headers
/asm
4822 for target
in $target_list; do
4823 target_dir
="$target"
4824 config_target_mak
=$target_dir/config-target.mak
4825 target_name
=`echo $target | cut -d '-' -f 1`
4826 target_bigendian
="no"
4828 case "$target_name" in
4829 armeb|lm32|m68k|microblaze|mips|mipsn32|mips64|moxie|or32|ppc|ppcemb|ppc64|ppc64abi32|s390x|sh4eb|sparc|sparc64|sparc32plus|xtensaeb
)
4830 target_bigendian
=yes
4834 target_user_only
="no"
4835 target_linux_user
="no"
4836 target_bsd_user
="no"
4838 ${target_name}-softmmu)
4839 target_softmmu
="yes"
4841 ${target_name}-linux-user)
4842 if test "$linux" != "yes" ; then
4843 error_exit
"Target '$target' is only available on a Linux host"
4845 target_user_only
="yes"
4846 target_linux_user
="yes"
4848 ${target_name}-bsd-user)
4849 if test "$bsd" != "yes" ; then
4850 error_exit
"Target '$target' is only available on a BSD host"
4852 target_user_only
="yes"
4853 target_bsd_user
="yes"
4856 error_exit
"Target '$target' not recognised"
4861 mkdir
-p $target_dir
4862 echo "# Automatically generated by configure - do not modify" > $config_target_mak
4865 interp_prefix1
=`echo "$interp_prefix" | sed "s/%M/$target_name/g"`
4868 TARGET_ARCH
="$target_name"
4872 case "$target_name" in
4876 TARGET_BASE_ARCH
=i386
4883 gdb_xml_files
="arm-core.xml arm-vfp.xml arm-vfp3.xml arm-neon.xml"
4886 TARGET_BASE_ARCH
=arm
4888 gdb_xml_files
="aarch64-core.xml aarch64-fpu.xml"
4896 gdb_xml_files
="cf-core.xml cf-fp.xml"
4898 microblaze|microblazeel
)
4899 TARGET_ARCH
=microblaze
4904 echo "TARGET_ABI_MIPSO32=y" >> $config_target_mak
4908 TARGET_BASE_ARCH
=mips
4909 echo "TARGET_ABI_MIPSN32=y" >> $config_target_mak
4910 echo "TARGET_ABI32=y" >> $config_target_mak
4914 TARGET_BASE_ARCH
=mips
4915 echo "TARGET_ABI_MIPSN64=y" >> $config_target_mak
4920 TARGET_ARCH
=openrisc
4921 TARGET_BASE_ARCH
=openrisc
4924 gdb_xml_files
="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4927 TARGET_BASE_ARCH
=ppc
4929 gdb_xml_files
="power-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4932 TARGET_BASE_ARCH
=ppc
4934 gdb_xml_files
="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4938 TARGET_BASE_ARCH
=ppc
4940 echo "TARGET_ABI32=y" >> $config_target_mak
4941 gdb_xml_files
="power64-core.xml power-fpu.xml power-altivec.xml power-spe.xml"
4950 TARGET_BASE_ARCH
=sparc
4954 TARGET_BASE_ARCH
=sparc
4955 TARGET_ABI_DIR
=sparc
4956 echo "TARGET_ABI32=y" >> $config_target_mak
4966 error_exit
"Unsupported target CPU"
4969 # TARGET_BASE_ARCH needs to be defined after TARGET_ARCH
4970 if [ "$TARGET_BASE_ARCH" = "" ]; then
4971 TARGET_BASE_ARCH
=$TARGET_ARCH
4974 symlink
"$source_path/Makefile.target" "$target_dir/Makefile"
4977 echo "$@"| LC_ALL
=C
tr '[a-z]' '[A-Z]'
4980 target_arch_name
="`upper $TARGET_ARCH`"
4981 echo "TARGET_$target_arch_name=y" >> $config_target_mak
4982 echo "TARGET_NAME=$target_name" >> $config_target_mak
4983 echo "TARGET_BASE_ARCH=$TARGET_BASE_ARCH" >> $config_target_mak
4984 if [ "$TARGET_ABI_DIR" = "" ]; then
4985 TARGET_ABI_DIR
=$TARGET_ARCH
4987 echo "TARGET_ABI_DIR=$TARGET_ABI_DIR" >> $config_target_mak
4988 case "$target_name" in
4990 if test "$xen" = "yes" -a "$target_softmmu" = "yes" ; then
4991 echo "CONFIG_XEN=y" >> $config_target_mak
4992 if test "$xen_pci_passthrough" = yes; then
4993 echo "CONFIG_XEN_PCI_PASSTHROUGH=y" >> "$config_target_mak"
4999 case "$target_name" in
5000 aarch64|arm|i386|x86_64|ppcemb|ppc|ppc64|s390x
)
5001 # Make sure the target and host cpus are compatible
5002 if test "$kvm" = "yes" -a "$target_softmmu" = "yes" -a \
5003 \
( "$target_name" = "$cpu" -o \
5004 \
( "$target_name" = "ppcemb" -a "$cpu" = "ppc" \
) -o \
5005 \
( "$target_name" = "ppc64" -a "$cpu" = "ppc" \
) -o \
5006 \
( "$target_name" = "ppc" -a "$cpu" = "ppc64" \
) -o \
5007 \
( "$target_name" = "ppcemb" -a "$cpu" = "ppc64" \
) -o \
5008 \
( "$target_name" = "x86_64" -a "$cpu" = "i386" \
) -o \
5009 \
( "$target_name" = "i386" -a "$cpu" = "x86_64" \
) \
) ; then
5010 echo "CONFIG_KVM=y" >> $config_target_mak
5011 if test "$vhost_net" = "yes" ; then
5012 echo "CONFIG_VHOST_NET=y" >> $config_target_mak
5016 if test "$target_bigendian" = "yes" ; then
5017 echo "TARGET_WORDS_BIGENDIAN=y" >> $config_target_mak
5019 if test "$target_softmmu" = "yes" ; then
5020 echo "CONFIG_SOFTMMU=y" >> $config_target_mak
5022 if test "$target_user_only" = "yes" ; then
5023 echo "CONFIG_USER_ONLY=y" >> $config_target_mak
5024 echo "CONFIG_QEMU_INTERP_PREFIX=\"$interp_prefix1\"" >> $config_target_mak
5026 if test "$target_linux_user" = "yes" ; then
5027 echo "CONFIG_LINUX_USER=y" >> $config_target_mak
5030 if test ! -z "$gdb_xml_files" ; then
5031 for x
in $gdb_xml_files; do
5032 list
="$list $source_path/gdb-xml/$x"
5034 echo "TARGET_XML_FILES=$list" >> $config_target_mak
5037 if test "$target_user_only" = "yes" -a "$bflt" = "yes"; then
5038 echo "TARGET_HAS_BFLT=y" >> $config_target_mak
5040 if test "$target_user_only" = "yes" -a "$guest_base" = "yes"; then
5041 echo "CONFIG_USE_GUEST_BASE=y" >> $config_target_mak
5043 if test "$target_bsd_user" = "yes" ; then
5044 echo "CONFIG_BSD_USER=y" >> $config_target_mak
5047 # generate QEMU_CFLAGS/LDFLAGS for targets
5052 for i
in $ARCH $TARGET_BASE_ARCH ; do
5055 echo "CONFIG_ALPHA_DIS=y" >> $config_target_mak
5056 echo "CONFIG_ALPHA_DIS=y" >> config-all-disas.mak
5059 if test -n "${cxx}"; then
5060 echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak
5061 echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak
5065 echo "CONFIG_ARM_DIS=y" >> $config_target_mak
5066 echo "CONFIG_ARM_DIS=y" >> config-all-disas.mak
5067 if test -n "${cxx}"; then
5068 echo "CONFIG_ARM_A64_DIS=y" >> $config_target_mak
5069 echo "CONFIG_ARM_A64_DIS=y" >> config-all-disas.mak
5073 echo "CONFIG_CRIS_DIS=y" >> $config_target_mak
5074 echo "CONFIG_CRIS_DIS=y" >> config-all-disas.mak
5077 echo "CONFIG_HPPA_DIS=y" >> $config_target_mak
5078 echo "CONFIG_HPPA_DIS=y" >> config-all-disas.mak
5081 echo "CONFIG_I386_DIS=y" >> $config_target_mak
5082 echo "CONFIG_I386_DIS=y" >> config-all-disas.mak
5085 echo "CONFIG_IA64_DIS=y" >> $config_target_mak
5086 echo "CONFIG_IA64_DIS=y" >> config-all-disas.mak
5089 echo "CONFIG_LM32_DIS=y" >> $config_target_mak
5090 echo "CONFIG_LM32_DIS=y" >> config-all-disas.mak
5093 echo "CONFIG_M68K_DIS=y" >> $config_target_mak
5094 echo "CONFIG_M68K_DIS=y" >> config-all-disas.mak
5097 echo "CONFIG_MICROBLAZE_DIS=y" >> $config_target_mak
5098 echo "CONFIG_MICROBLAZE_DIS=y" >> config-all-disas.mak
5101 echo "CONFIG_MIPS_DIS=y" >> $config_target_mak
5102 echo "CONFIG_MIPS_DIS=y" >> config-all-disas.mak
5105 echo "CONFIG_MOXIE_DIS=y" >> $config_target_mak
5106 echo "CONFIG_MOXIE_DIS=y" >> config-all-disas.mak
5109 echo "CONFIG_OPENRISC_DIS=y" >> $config_target_mak
5110 echo "CONFIG_OPENRISC_DIS=y" >> config-all-disas.mak
5113 echo "CONFIG_PPC_DIS=y" >> $config_target_mak
5114 echo "CONFIG_PPC_DIS=y" >> config-all-disas.mak
5117 echo "CONFIG_S390_DIS=y" >> $config_target_mak
5118 echo "CONFIG_S390_DIS=y" >> config-all-disas.mak
5121 echo "CONFIG_SH4_DIS=y" >> $config_target_mak
5122 echo "CONFIG_SH4_DIS=y" >> config-all-disas.mak
5125 echo "CONFIG_SPARC_DIS=y" >> $config_target_mak
5126 echo "CONFIG_SPARC_DIS=y" >> config-all-disas.mak
5129 echo "CONFIG_XTENSA_DIS=y" >> $config_target_mak
5130 echo "CONFIG_XTENSA_DIS=y" >> config-all-disas.mak
5134 if test "$tcg_interpreter" = "yes" ; then
5135 echo "CONFIG_TCI_DIS=y" >> $config_target_mak
5136 echo "CONFIG_TCI_DIS=y" >> config-all-disas.mak
5141 # Ensure there's only a single GP
5142 cflags
="-msmall-data $cflags"
5146 if test "$gprof" = "yes" ; then
5147 echo "TARGET_GPROF=yes" >> $config_target_mak
5148 if test "$target_linux_user" = "yes" ; then
5150 ldflags
="-p $ldflags"
5152 if test "$target_softmmu" = "yes" ; then
5153 ldflags
="-p $ldflags"
5154 echo "GPROF_CFLAGS=-p" >> $config_target_mak
5158 if test "$target_linux_user" = "yes" -o "$target_bsd_user" = "yes" ; then
5159 ldflags
="$ldflags $textseg_ldflags"
5162 echo "LDFLAGS+=$ldflags" >> $config_target_mak
5163 echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
5165 done # for target in $targets
5167 if [ "$pixman" = "internal" ]; then
5168 echo "config-host.h: subdir-pixman" >> $config_host_mak
5171 if test "$rdma" = "yes" ; then
5172 echo "CONFIG_RDMA=y" >> $config_host_mak
5175 if [ "$dtc_internal" = "yes" ]; then
5176 echo "config-host.h: subdir-dtc" >> $config_host_mak
5179 # build tree in object directory in case the source is not in the current directory
5180 DIRS
="tests tests/tcg tests/tcg/cris tests/tcg/lm32 tests/libqos tests/qapi-schema tests/tcg/xtensa tests/qemu-iotests"
5182 DIRS
="$DIRS pc-bios/optionrom pc-bios/spapr-rtas pc-bios/s390-ccw"
5183 DIRS
="$DIRS roms/seabios roms/vgabios"
5184 DIRS
="$DIRS qapi-generated"
5185 FILES
="Makefile tests/tcg/Makefile qdict-test-data.txt"
5186 FILES
="$FILES tests/tcg/cris/Makefile tests/tcg/cris/.gdbinit"
5187 FILES
="$FILES tests/tcg/lm32/Makefile tests/tcg/xtensa/Makefile po/Makefile"
5188 FILES
="$FILES pc-bios/optionrom/Makefile pc-bios/keymaps"
5189 FILES
="$FILES pc-bios/spapr-rtas/Makefile"
5190 FILES
="$FILES pc-bios/s390-ccw/Makefile"
5191 FILES
="$FILES roms/seabios/Makefile roms/vgabios/Makefile"
5192 FILES
="$FILES pc-bios/qemu-icon.bmp"
5194 $source_path/pc-bios
/*.bin \
5195 $source_path/pc-bios
/*.aml \
5196 $source_path/pc-bios
/*.rom \
5197 $source_path/pc-bios
/*.dtb \
5198 $source_path/pc-bios
/*.img \
5199 $source_path/pc-bios
/openbios-
* \
5200 $source_path/pc-bios
/palcode-
*
5202 FILES
="$FILES pc-bios/`basename $bios_file`"
5204 for test_file
in `find $source_path/tests/acpi-test-data -type f`
5206 FILES
="$FILES tests/acpi-test-data`echo $test_file | sed -e 's/.*acpi-test-data//'`"
5209 for f
in $FILES ; do
5210 if [ -e "$source_path/$f" ] && [ "$pwd_is_source_path" != "y" ]; then
5211 symlink
"$source_path/$f" "$f"
5215 # temporary config to build submodules
5216 for rom
in seabios vgabios
; do
5217 config_mak
=roms
/$rom/config.mak
5218 echo "# Automatically generated by configure - do not modify" > $config_mak
5219 echo "SRC_PATH=$source_path/roms/$rom" >> $config_mak
5220 echo "AS=$as" >> $config_mak
5221 echo "CC=$cc" >> $config_mak
5222 echo "BCC=bcc" >> $config_mak
5223 echo "CPP=$cpp" >> $config_mak
5224 echo "OBJCOPY=objcopy" >> $config_mak
5225 echo "IASL=$iasl" >> $config_mak
5226 echo "LD=$ld" >> $config_mak
5229 if test "$docs" = "yes" ; then
5233 # Save the configure command line for later reuse.
5234 cat <<EOD >config.status
5236 # Generated by configure.
5237 # Run this file to recreate the current configuration.
5238 # Compiler output produced by configure, useful for debugging
5239 # configure, is in config.log if it exists.
5241 printf "exec" >>config.status
5242 printf " '%s'" "$0" "$@" >>config.status
5243 echo >>config.status
5244 chmod +x config.status