]> git.proxmox.com Git - mirror_ubuntu-bionic-kernel.git/blob - crypto/Kconfig
crypto: api - Add crypto_grab_spawn primitive
[mirror_ubuntu-bionic-kernel.git] / crypto / Kconfig
1 #
2 # Generic algorithms support
3 #
4 config XOR_BLOCKS
5 tristate
6
7 #
8 # async_tx api: hardware offloaded memory transfer/transform support
9 #
10 source "crypto/async_tx/Kconfig"
11
12 #
13 # Cryptographic API Configuration
14 #
15 menuconfig CRYPTO
16 tristate "Cryptographic API"
17 help
18 This option provides the core Cryptographic API.
19
20 if CRYPTO
21
22 comment "Crypto core or helper"
23
24 config CRYPTO_FIPS
25 bool "FIPS 200 compliance"
26 depends on (CRYPTO_ANSI_CPRNG || CRYPTO_DRBG) && !CRYPTO_MANAGER_DISABLE_TESTS
27 depends on MODULE_SIG
28 help
29 This options enables the fips boot option which is
30 required if you want to system to operate in a FIPS 200
31 certification. You should say no unless you know what
32 this is.
33
34 config CRYPTO_ALGAPI
35 tristate
36 select CRYPTO_ALGAPI2
37 help
38 This option provides the API for cryptographic algorithms.
39
40 config CRYPTO_ALGAPI2
41 tristate
42
43 config CRYPTO_AEAD
44 tristate
45 select CRYPTO_AEAD2
46 select CRYPTO_ALGAPI
47
48 config CRYPTO_AEAD2
49 tristate
50 select CRYPTO_ALGAPI2
51
52 config CRYPTO_BLKCIPHER
53 tristate
54 select CRYPTO_BLKCIPHER2
55 select CRYPTO_ALGAPI
56
57 config CRYPTO_BLKCIPHER2
58 tristate
59 select CRYPTO_ALGAPI2
60 select CRYPTO_RNG2
61 select CRYPTO_WORKQUEUE
62
63 config CRYPTO_HASH
64 tristate
65 select CRYPTO_HASH2
66 select CRYPTO_ALGAPI
67
68 config CRYPTO_HASH2
69 tristate
70 select CRYPTO_ALGAPI2
71
72 config CRYPTO_RNG
73 tristate
74 select CRYPTO_RNG2
75 select CRYPTO_ALGAPI
76
77 config CRYPTO_RNG2
78 tristate
79 select CRYPTO_ALGAPI2
80
81 config CRYPTO_PCOMP
82 tristate
83 select CRYPTO_PCOMP2
84 select CRYPTO_ALGAPI
85
86 config CRYPTO_PCOMP2
87 tristate
88 select CRYPTO_ALGAPI2
89
90 config CRYPTO_MANAGER
91 tristate "Cryptographic algorithm manager"
92 select CRYPTO_MANAGER2
93 help
94 Create default cryptographic template instantiations such as
95 cbc(aes).
96
97 config CRYPTO_MANAGER2
98 def_tristate CRYPTO_MANAGER || (CRYPTO_MANAGER!=n && CRYPTO_ALGAPI=y)
99 select CRYPTO_AEAD2
100 select CRYPTO_HASH2
101 select CRYPTO_BLKCIPHER2
102 select CRYPTO_PCOMP2
103
104 config CRYPTO_USER
105 tristate "Userspace cryptographic algorithm configuration"
106 depends on NET
107 select CRYPTO_MANAGER
108 help
109 Userspace configuration for cryptographic instantiations such as
110 cbc(aes).
111
112 config CRYPTO_MANAGER_DISABLE_TESTS
113 bool "Disable run-time self tests"
114 default y
115 depends on CRYPTO_MANAGER2
116 help
117 Disable run-time self tests that normally take place at
118 algorithm registration.
119
120 config CRYPTO_GF128MUL
121 tristate "GF(2^128) multiplication functions"
122 help
123 Efficient table driven implementation of multiplications in the
124 field GF(2^128). This is needed by some cypher modes. This
125 option will be selected automatically if you select such a
126 cipher mode. Only select this option by hand if you expect to load
127 an external module that requires these functions.
128
129 config CRYPTO_NULL
130 tristate "Null algorithms"
131 select CRYPTO_ALGAPI
132 select CRYPTO_BLKCIPHER
133 select CRYPTO_HASH
134 help
135 These are 'Null' algorithms, used by IPsec, which do nothing.
136
137 config CRYPTO_PCRYPT
138 tristate "Parallel crypto engine"
139 depends on SMP
140 select PADATA
141 select CRYPTO_MANAGER
142 select CRYPTO_AEAD
143 help
144 This converts an arbitrary crypto algorithm into a parallel
145 algorithm that executes in kernel threads.
146
147 config CRYPTO_WORKQUEUE
148 tristate
149
150 config CRYPTO_CRYPTD
151 tristate "Software async crypto daemon"
152 select CRYPTO_BLKCIPHER
153 select CRYPTO_HASH
154 select CRYPTO_MANAGER
155 select CRYPTO_WORKQUEUE
156 help
157 This is a generic software asynchronous crypto daemon that
158 converts an arbitrary synchronous software crypto algorithm
159 into an asynchronous algorithm that executes in a kernel thread.
160
161 config CRYPTO_MCRYPTD
162 tristate "Software async multi-buffer crypto daemon"
163 select CRYPTO_BLKCIPHER
164 select CRYPTO_HASH
165 select CRYPTO_MANAGER
166 select CRYPTO_WORKQUEUE
167 help
168 This is a generic software asynchronous crypto daemon that
169 provides the kernel thread to assist multi-buffer crypto
170 algorithms for submitting jobs and flushing jobs in multi-buffer
171 crypto algorithms. Multi-buffer crypto algorithms are executed
172 in the context of this kernel thread and drivers can post
173 their crypto request asynchronously to be processed by this daemon.
174
175 config CRYPTO_AUTHENC
176 tristate "Authenc support"
177 select CRYPTO_AEAD
178 select CRYPTO_BLKCIPHER
179 select CRYPTO_MANAGER
180 select CRYPTO_HASH
181 help
182 Authenc: Combined mode wrapper for IPsec.
183 This is required for IPSec.
184
185 config CRYPTO_TEST
186 tristate "Testing module"
187 depends on m
188 select CRYPTO_MANAGER
189 help
190 Quick & dirty crypto test module.
191
192 config CRYPTO_ABLK_HELPER
193 tristate
194 select CRYPTO_CRYPTD
195
196 config CRYPTO_GLUE_HELPER_X86
197 tristate
198 depends on X86
199 select CRYPTO_ALGAPI
200
201 comment "Authenticated Encryption with Associated Data"
202
203 config CRYPTO_CCM
204 tristate "CCM support"
205 select CRYPTO_CTR
206 select CRYPTO_AEAD
207 help
208 Support for Counter with CBC MAC. Required for IPsec.
209
210 config CRYPTO_GCM
211 tristate "GCM/GMAC support"
212 select CRYPTO_CTR
213 select CRYPTO_AEAD
214 select CRYPTO_GHASH
215 select CRYPTO_NULL
216 help
217 Support for Galois/Counter Mode (GCM) and Galois Message
218 Authentication Code (GMAC). Required for IPSec.
219
220 config CRYPTO_SEQIV
221 tristate "Sequence Number IV Generator"
222 select CRYPTO_AEAD
223 select CRYPTO_BLKCIPHER
224 select CRYPTO_RNG
225 help
226 This IV generator generates an IV based on a sequence number by
227 xoring it with a salt. This algorithm is mainly useful for CTR
228
229 comment "Block modes"
230
231 config CRYPTO_CBC
232 tristate "CBC support"
233 select CRYPTO_BLKCIPHER
234 select CRYPTO_MANAGER
235 help
236 CBC: Cipher Block Chaining mode
237 This block cipher algorithm is required for IPSec.
238
239 config CRYPTO_CTR
240 tristate "CTR support"
241 select CRYPTO_BLKCIPHER
242 select CRYPTO_SEQIV
243 select CRYPTO_MANAGER
244 help
245 CTR: Counter mode
246 This block cipher algorithm is required for IPSec.
247
248 config CRYPTO_CTS
249 tristate "CTS support"
250 select CRYPTO_BLKCIPHER
251 help
252 CTS: Cipher Text Stealing
253 This is the Cipher Text Stealing mode as described by
254 Section 8 of rfc2040 and referenced by rfc3962.
255 (rfc3962 includes errata information in its Appendix A)
256 This mode is required for Kerberos gss mechanism support
257 for AES encryption.
258
259 config CRYPTO_ECB
260 tristate "ECB support"
261 select CRYPTO_BLKCIPHER
262 select CRYPTO_MANAGER
263 help
264 ECB: Electronic CodeBook mode
265 This is the simplest block cipher algorithm. It simply encrypts
266 the input block by block.
267
268 config CRYPTO_LRW
269 tristate "LRW support"
270 select CRYPTO_BLKCIPHER
271 select CRYPTO_MANAGER
272 select CRYPTO_GF128MUL
273 help
274 LRW: Liskov Rivest Wagner, a tweakable, non malleable, non movable
275 narrow block cipher mode for dm-crypt. Use it with cipher
276 specification string aes-lrw-benbi, the key must be 256, 320 or 384.
277 The first 128, 192 or 256 bits in the key are used for AES and the
278 rest is used to tie each cipher block to its logical position.
279
280 config CRYPTO_PCBC
281 tristate "PCBC support"
282 select CRYPTO_BLKCIPHER
283 select CRYPTO_MANAGER
284 help
285 PCBC: Propagating Cipher Block Chaining mode
286 This block cipher algorithm is required for RxRPC.
287
288 config CRYPTO_XTS
289 tristate "XTS support"
290 select CRYPTO_BLKCIPHER
291 select CRYPTO_MANAGER
292 select CRYPTO_GF128MUL
293 help
294 XTS: IEEE1619/D16 narrow block cipher use with aes-xts-plain,
295 key size 256, 384 or 512 bits. This implementation currently
296 can't handle a sectorsize which is not a multiple of 16 bytes.
297
298 comment "Hash modes"
299
300 config CRYPTO_CMAC
301 tristate "CMAC support"
302 select CRYPTO_HASH
303 select CRYPTO_MANAGER
304 help
305 Cipher-based Message Authentication Code (CMAC) specified by
306 The National Institute of Standards and Technology (NIST).
307
308 https://tools.ietf.org/html/rfc4493
309 http://csrc.nist.gov/publications/nistpubs/800-38B/SP_800-38B.pdf
310
311 config CRYPTO_HMAC
312 tristate "HMAC support"
313 select CRYPTO_HASH
314 select CRYPTO_MANAGER
315 help
316 HMAC: Keyed-Hashing for Message Authentication (RFC2104).
317 This is required for IPSec.
318
319 config CRYPTO_XCBC
320 tristate "XCBC support"
321 select CRYPTO_HASH
322 select CRYPTO_MANAGER
323 help
324 XCBC: Keyed-Hashing with encryption algorithm
325 http://www.ietf.org/rfc/rfc3566.txt
326 http://csrc.nist.gov/encryption/modes/proposedmodes/
327 xcbc-mac/xcbc-mac-spec.pdf
328
329 config CRYPTO_VMAC
330 tristate "VMAC support"
331 select CRYPTO_HASH
332 select CRYPTO_MANAGER
333 help
334 VMAC is a message authentication algorithm designed for
335 very high speed on 64-bit architectures.
336
337 See also:
338 <http://fastcrypto.org/vmac>
339
340 comment "Digest"
341
342 config CRYPTO_CRC32C
343 tristate "CRC32c CRC algorithm"
344 select CRYPTO_HASH
345 select CRC32
346 help
347 Castagnoli, et al Cyclic Redundancy-Check Algorithm. Used
348 by iSCSI for header and data digests and by others.
349 See Castagnoli93. Module will be crc32c.
350
351 config CRYPTO_CRC32C_INTEL
352 tristate "CRC32c INTEL hardware acceleration"
353 depends on X86
354 select CRYPTO_HASH
355 help
356 In Intel processor with SSE4.2 supported, the processor will
357 support CRC32C implementation using hardware accelerated CRC32
358 instruction. This option will create 'crc32c-intel' module,
359 which will enable any routine to use the CRC32 instruction to
360 gain performance compared with software implementation.
361 Module will be crc32c-intel.
362
363 config CRYPTO_CRC32C_SPARC64
364 tristate "CRC32c CRC algorithm (SPARC64)"
365 depends on SPARC64
366 select CRYPTO_HASH
367 select CRC32
368 help
369 CRC32c CRC algorithm implemented using sparc64 crypto instructions,
370 when available.
371
372 config CRYPTO_CRC32
373 tristate "CRC32 CRC algorithm"
374 select CRYPTO_HASH
375 select CRC32
376 help
377 CRC-32-IEEE 802.3 cyclic redundancy-check algorithm.
378 Shash crypto api wrappers to crc32_le function.
379
380 config CRYPTO_CRC32_PCLMUL
381 tristate "CRC32 PCLMULQDQ hardware acceleration"
382 depends on X86
383 select CRYPTO_HASH
384 select CRC32
385 help
386 From Intel Westmere and AMD Bulldozer processor with SSE4.2
387 and PCLMULQDQ supported, the processor will support
388 CRC32 PCLMULQDQ implementation using hardware accelerated PCLMULQDQ
389 instruction. This option will create 'crc32-plcmul' module,
390 which will enable any routine to use the CRC-32-IEEE 802.3 checksum
391 and gain better performance as compared with the table implementation.
392
393 config CRYPTO_CRCT10DIF
394 tristate "CRCT10DIF algorithm"
395 select CRYPTO_HASH
396 help
397 CRC T10 Data Integrity Field computation is being cast as
398 a crypto transform. This allows for faster crc t10 diff
399 transforms to be used if they are available.
400
401 config CRYPTO_CRCT10DIF_PCLMUL
402 tristate "CRCT10DIF PCLMULQDQ hardware acceleration"
403 depends on X86 && 64BIT && CRC_T10DIF
404 select CRYPTO_HASH
405 help
406 For x86_64 processors with SSE4.2 and PCLMULQDQ supported,
407 CRC T10 DIF PCLMULQDQ computation can be hardware
408 accelerated PCLMULQDQ instruction. This option will create
409 'crct10dif-plcmul' module, which is faster when computing the
410 crct10dif checksum as compared with the generic table implementation.
411
412 config CRYPTO_GHASH
413 tristate "GHASH digest algorithm"
414 select CRYPTO_GF128MUL
415 help
416 GHASH is message digest algorithm for GCM (Galois/Counter Mode).
417
418 config CRYPTO_MD4
419 tristate "MD4 digest algorithm"
420 select CRYPTO_HASH
421 help
422 MD4 message digest algorithm (RFC1320).
423
424 config CRYPTO_MD5
425 tristate "MD5 digest algorithm"
426 select CRYPTO_HASH
427 help
428 MD5 message digest algorithm (RFC1321).
429
430 config CRYPTO_MD5_OCTEON
431 tristate "MD5 digest algorithm (OCTEON)"
432 depends on CPU_CAVIUM_OCTEON
433 select CRYPTO_MD5
434 select CRYPTO_HASH
435 help
436 MD5 message digest algorithm (RFC1321) implemented
437 using OCTEON crypto instructions, when available.
438
439 config CRYPTO_MD5_PPC
440 tristate "MD5 digest algorithm (PPC)"
441 depends on PPC
442 select CRYPTO_HASH
443 help
444 MD5 message digest algorithm (RFC1321) implemented
445 in PPC assembler.
446
447 config CRYPTO_MD5_SPARC64
448 tristate "MD5 digest algorithm (SPARC64)"
449 depends on SPARC64
450 select CRYPTO_MD5
451 select CRYPTO_HASH
452 help
453 MD5 message digest algorithm (RFC1321) implemented
454 using sparc64 crypto instructions, when available.
455
456 config CRYPTO_MICHAEL_MIC
457 tristate "Michael MIC keyed digest algorithm"
458 select CRYPTO_HASH
459 help
460 Michael MIC is used for message integrity protection in TKIP
461 (IEEE 802.11i). This algorithm is required for TKIP, but it
462 should not be used for other purposes because of the weakness
463 of the algorithm.
464
465 config CRYPTO_RMD128
466 tristate "RIPEMD-128 digest algorithm"
467 select CRYPTO_HASH
468 help
469 RIPEMD-128 (ISO/IEC 10118-3:2004).
470
471 RIPEMD-128 is a 128-bit cryptographic hash function. It should only
472 be used as a secure replacement for RIPEMD. For other use cases,
473 RIPEMD-160 should be used.
474
475 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
476 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
477
478 config CRYPTO_RMD160
479 tristate "RIPEMD-160 digest algorithm"
480 select CRYPTO_HASH
481 help
482 RIPEMD-160 (ISO/IEC 10118-3:2004).
483
484 RIPEMD-160 is a 160-bit cryptographic hash function. It is intended
485 to be used as a secure replacement for the 128-bit hash functions
486 MD4, MD5 and it's predecessor RIPEMD
487 (not to be confused with RIPEMD-128).
488
489 It's speed is comparable to SHA1 and there are no known attacks
490 against RIPEMD-160.
491
492 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
493 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
494
495 config CRYPTO_RMD256
496 tristate "RIPEMD-256 digest algorithm"
497 select CRYPTO_HASH
498 help
499 RIPEMD-256 is an optional extension of RIPEMD-128 with a
500 256 bit hash. It is intended for applications that require
501 longer hash-results, without needing a larger security level
502 (than RIPEMD-128).
503
504 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
505 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
506
507 config CRYPTO_RMD320
508 tristate "RIPEMD-320 digest algorithm"
509 select CRYPTO_HASH
510 help
511 RIPEMD-320 is an optional extension of RIPEMD-160 with a
512 320 bit hash. It is intended for applications that require
513 longer hash-results, without needing a larger security level
514 (than RIPEMD-160).
515
516 Developed by Hans Dobbertin, Antoon Bosselaers and Bart Preneel.
517 See <http://homes.esat.kuleuven.be/~bosselae/ripemd160.html>
518
519 config CRYPTO_SHA1
520 tristate "SHA1 digest algorithm"
521 select CRYPTO_HASH
522 help
523 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
524
525 config CRYPTO_SHA1_SSSE3
526 tristate "SHA1 digest algorithm (SSSE3/AVX/AVX2)"
527 depends on X86 && 64BIT
528 select CRYPTO_SHA1
529 select CRYPTO_HASH
530 help
531 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
532 using Supplemental SSE3 (SSSE3) instructions or Advanced Vector
533 Extensions (AVX/AVX2), when available.
534
535 config CRYPTO_SHA256_SSSE3
536 tristate "SHA256 digest algorithm (SSSE3/AVX/AVX2)"
537 depends on X86 && 64BIT
538 select CRYPTO_SHA256
539 select CRYPTO_HASH
540 help
541 SHA-256 secure hash standard (DFIPS 180-2) implemented
542 using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
543 Extensions version 1 (AVX1), or Advanced Vector Extensions
544 version 2 (AVX2) instructions, when available.
545
546 config CRYPTO_SHA512_SSSE3
547 tristate "SHA512 digest algorithm (SSSE3/AVX/AVX2)"
548 depends on X86 && 64BIT
549 select CRYPTO_SHA512
550 select CRYPTO_HASH
551 help
552 SHA-512 secure hash standard (DFIPS 180-2) implemented
553 using Supplemental SSE3 (SSSE3) instructions, or Advanced Vector
554 Extensions version 1 (AVX1), or Advanced Vector Extensions
555 version 2 (AVX2) instructions, when available.
556
557 config CRYPTO_SHA1_OCTEON
558 tristate "SHA1 digest algorithm (OCTEON)"
559 depends on CPU_CAVIUM_OCTEON
560 select CRYPTO_SHA1
561 select CRYPTO_HASH
562 help
563 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
564 using OCTEON crypto instructions, when available.
565
566 config CRYPTO_SHA1_SPARC64
567 tristate "SHA1 digest algorithm (SPARC64)"
568 depends on SPARC64
569 select CRYPTO_SHA1
570 select CRYPTO_HASH
571 help
572 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
573 using sparc64 crypto instructions, when available.
574
575 config CRYPTO_SHA1_PPC
576 tristate "SHA1 digest algorithm (powerpc)"
577 depends on PPC
578 help
579 This is the powerpc hardware accelerated implementation of the
580 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2).
581
582 config CRYPTO_SHA1_PPC_SPE
583 tristate "SHA1 digest algorithm (PPC SPE)"
584 depends on PPC && SPE
585 help
586 SHA-1 secure hash standard (DFIPS 180-4) implemented
587 using powerpc SPE SIMD instruction set.
588
589 config CRYPTO_SHA1_MB
590 tristate "SHA1 digest algorithm (x86_64 Multi-Buffer, Experimental)"
591 depends on X86 && 64BIT
592 select CRYPTO_SHA1
593 select CRYPTO_HASH
594 select CRYPTO_MCRYPTD
595 help
596 SHA-1 secure hash standard (FIPS 180-1/DFIPS 180-2) implemented
597 using multi-buffer technique. This algorithm computes on
598 multiple data lanes concurrently with SIMD instructions for
599 better throughput. It should not be enabled by default but
600 used when there is significant amount of work to keep the keep
601 the data lanes filled to get performance benefit. If the data
602 lanes remain unfilled, a flush operation will be initiated to
603 process the crypto jobs, adding a slight latency.
604
605 config CRYPTO_SHA256
606 tristate "SHA224 and SHA256 digest algorithm"
607 select CRYPTO_HASH
608 help
609 SHA256 secure hash standard (DFIPS 180-2).
610
611 This version of SHA implements a 256 bit hash with 128 bits of
612 security against collision attacks.
613
614 This code also includes SHA-224, a 224 bit hash with 112 bits
615 of security against collision attacks.
616
617 config CRYPTO_SHA256_PPC_SPE
618 tristate "SHA224 and SHA256 digest algorithm (PPC SPE)"
619 depends on PPC && SPE
620 select CRYPTO_SHA256
621 select CRYPTO_HASH
622 help
623 SHA224 and SHA256 secure hash standard (DFIPS 180-2)
624 implemented using powerpc SPE SIMD instruction set.
625
626 config CRYPTO_SHA256_OCTEON
627 tristate "SHA224 and SHA256 digest algorithm (OCTEON)"
628 depends on CPU_CAVIUM_OCTEON
629 select CRYPTO_SHA256
630 select CRYPTO_HASH
631 help
632 SHA-256 secure hash standard (DFIPS 180-2) implemented
633 using OCTEON crypto instructions, when available.
634
635 config CRYPTO_SHA256_SPARC64
636 tristate "SHA224 and SHA256 digest algorithm (SPARC64)"
637 depends on SPARC64
638 select CRYPTO_SHA256
639 select CRYPTO_HASH
640 help
641 SHA-256 secure hash standard (DFIPS 180-2) implemented
642 using sparc64 crypto instructions, when available.
643
644 config CRYPTO_SHA512
645 tristate "SHA384 and SHA512 digest algorithms"
646 select CRYPTO_HASH
647 help
648 SHA512 secure hash standard (DFIPS 180-2).
649
650 This version of SHA implements a 512 bit hash with 256 bits of
651 security against collision attacks.
652
653 This code also includes SHA-384, a 384 bit hash with 192 bits
654 of security against collision attacks.
655
656 config CRYPTO_SHA512_OCTEON
657 tristate "SHA384 and SHA512 digest algorithms (OCTEON)"
658 depends on CPU_CAVIUM_OCTEON
659 select CRYPTO_SHA512
660 select CRYPTO_HASH
661 help
662 SHA-512 secure hash standard (DFIPS 180-2) implemented
663 using OCTEON crypto instructions, when available.
664
665 config CRYPTO_SHA512_SPARC64
666 tristate "SHA384 and SHA512 digest algorithm (SPARC64)"
667 depends on SPARC64
668 select CRYPTO_SHA512
669 select CRYPTO_HASH
670 help
671 SHA-512 secure hash standard (DFIPS 180-2) implemented
672 using sparc64 crypto instructions, when available.
673
674 config CRYPTO_TGR192
675 tristate "Tiger digest algorithms"
676 select CRYPTO_HASH
677 help
678 Tiger hash algorithm 192, 160 and 128-bit hashes
679
680 Tiger is a hash function optimized for 64-bit processors while
681 still having decent performance on 32-bit processors.
682 Tiger was developed by Ross Anderson and Eli Biham.
683
684 See also:
685 <http://www.cs.technion.ac.il/~biham/Reports/Tiger/>.
686
687 config CRYPTO_WP512
688 tristate "Whirlpool digest algorithms"
689 select CRYPTO_HASH
690 help
691 Whirlpool hash algorithm 512, 384 and 256-bit hashes
692
693 Whirlpool-512 is part of the NESSIE cryptographic primitives.
694 Whirlpool will be part of the ISO/IEC 10118-3:2003(E) standard
695
696 See also:
697 <http://www.larc.usp.br/~pbarreto/WhirlpoolPage.html>
698
699 config CRYPTO_GHASH_CLMUL_NI_INTEL
700 tristate "GHASH digest algorithm (CLMUL-NI accelerated)"
701 depends on X86 && 64BIT
702 select CRYPTO_CRYPTD
703 help
704 GHASH is message digest algorithm for GCM (Galois/Counter Mode).
705 The implementation is accelerated by CLMUL-NI of Intel.
706
707 comment "Ciphers"
708
709 config CRYPTO_AES
710 tristate "AES cipher algorithms"
711 select CRYPTO_ALGAPI
712 help
713 AES cipher algorithms (FIPS-197). AES uses the Rijndael
714 algorithm.
715
716 Rijndael appears to be consistently a very good performer in
717 both hardware and software across a wide range of computing
718 environments regardless of its use in feedback or non-feedback
719 modes. Its key setup time is excellent, and its key agility is
720 good. Rijndael's very low memory requirements make it very well
721 suited for restricted-space environments, in which it also
722 demonstrates excellent performance. Rijndael's operations are
723 among the easiest to defend against power and timing attacks.
724
725 The AES specifies three key sizes: 128, 192 and 256 bits
726
727 See <http://csrc.nist.gov/CryptoToolkit/aes/> for more information.
728
729 config CRYPTO_AES_586
730 tristate "AES cipher algorithms (i586)"
731 depends on (X86 || UML_X86) && !64BIT
732 select CRYPTO_ALGAPI
733 select CRYPTO_AES
734 help
735 AES cipher algorithms (FIPS-197). AES uses the Rijndael
736 algorithm.
737
738 Rijndael appears to be consistently a very good performer in
739 both hardware and software across a wide range of computing
740 environments regardless of its use in feedback or non-feedback
741 modes. Its key setup time is excellent, and its key agility is
742 good. Rijndael's very low memory requirements make it very well
743 suited for restricted-space environments, in which it also
744 demonstrates excellent performance. Rijndael's operations are
745 among the easiest to defend against power and timing attacks.
746
747 The AES specifies three key sizes: 128, 192 and 256 bits
748
749 See <http://csrc.nist.gov/encryption/aes/> for more information.
750
751 config CRYPTO_AES_X86_64
752 tristate "AES cipher algorithms (x86_64)"
753 depends on (X86 || UML_X86) && 64BIT
754 select CRYPTO_ALGAPI
755 select CRYPTO_AES
756 help
757 AES cipher algorithms (FIPS-197). AES uses the Rijndael
758 algorithm.
759
760 Rijndael appears to be consistently a very good performer in
761 both hardware and software across a wide range of computing
762 environments regardless of its use in feedback or non-feedback
763 modes. Its key setup time is excellent, and its key agility is
764 good. Rijndael's very low memory requirements make it very well
765 suited for restricted-space environments, in which it also
766 demonstrates excellent performance. Rijndael's operations are
767 among the easiest to defend against power and timing attacks.
768
769 The AES specifies three key sizes: 128, 192 and 256 bits
770
771 See <http://csrc.nist.gov/encryption/aes/> for more information.
772
773 config CRYPTO_AES_NI_INTEL
774 tristate "AES cipher algorithms (AES-NI)"
775 depends on X86
776 select CRYPTO_AES_X86_64 if 64BIT
777 select CRYPTO_AES_586 if !64BIT
778 select CRYPTO_CRYPTD
779 select CRYPTO_ABLK_HELPER
780 select CRYPTO_ALGAPI
781 select CRYPTO_GLUE_HELPER_X86 if 64BIT
782 select CRYPTO_LRW
783 select CRYPTO_XTS
784 help
785 Use Intel AES-NI instructions for AES algorithm.
786
787 AES cipher algorithms (FIPS-197). AES uses the Rijndael
788 algorithm.
789
790 Rijndael appears to be consistently a very good performer in
791 both hardware and software across a wide range of computing
792 environments regardless of its use in feedback or non-feedback
793 modes. Its key setup time is excellent, and its key agility is
794 good. Rijndael's very low memory requirements make it very well
795 suited for restricted-space environments, in which it also
796 demonstrates excellent performance. Rijndael's operations are
797 among the easiest to defend against power and timing attacks.
798
799 The AES specifies three key sizes: 128, 192 and 256 bits
800
801 See <http://csrc.nist.gov/encryption/aes/> for more information.
802
803 In addition to AES cipher algorithm support, the acceleration
804 for some popular block cipher mode is supported too, including
805 ECB, CBC, LRW, PCBC, XTS. The 64 bit version has additional
806 acceleration for CTR.
807
808 config CRYPTO_AES_SPARC64
809 tristate "AES cipher algorithms (SPARC64)"
810 depends on SPARC64
811 select CRYPTO_CRYPTD
812 select CRYPTO_ALGAPI
813 help
814 Use SPARC64 crypto opcodes for AES algorithm.
815
816 AES cipher algorithms (FIPS-197). AES uses the Rijndael
817 algorithm.
818
819 Rijndael appears to be consistently a very good performer in
820 both hardware and software across a wide range of computing
821 environments regardless of its use in feedback or non-feedback
822 modes. Its key setup time is excellent, and its key agility is
823 good. Rijndael's very low memory requirements make it very well
824 suited for restricted-space environments, in which it also
825 demonstrates excellent performance. Rijndael's operations are
826 among the easiest to defend against power and timing attacks.
827
828 The AES specifies three key sizes: 128, 192 and 256 bits
829
830 See <http://csrc.nist.gov/encryption/aes/> for more information.
831
832 In addition to AES cipher algorithm support, the acceleration
833 for some popular block cipher mode is supported too, including
834 ECB and CBC.
835
836 config CRYPTO_AES_PPC_SPE
837 tristate "AES cipher algorithms (PPC SPE)"
838 depends on PPC && SPE
839 help
840 AES cipher algorithms (FIPS-197). Additionally the acceleration
841 for popular block cipher modes ECB, CBC, CTR and XTS is supported.
842 This module should only be used for low power (router) devices
843 without hardware AES acceleration (e.g. caam crypto). It reduces the
844 size of the AES tables from 16KB to 8KB + 256 bytes and mitigates
845 timining attacks. Nevertheless it might be not as secure as other
846 architecture specific assembler implementations that work on 1KB
847 tables or 256 bytes S-boxes.
848
849 config CRYPTO_ANUBIS
850 tristate "Anubis cipher algorithm"
851 select CRYPTO_ALGAPI
852 help
853 Anubis cipher algorithm.
854
855 Anubis is a variable key length cipher which can use keys from
856 128 bits to 320 bits in length. It was evaluated as a entrant
857 in the NESSIE competition.
858
859 See also:
860 <https://www.cosic.esat.kuleuven.be/nessie/reports/>
861 <http://www.larc.usp.br/~pbarreto/AnubisPage.html>
862
863 config CRYPTO_ARC4
864 tristate "ARC4 cipher algorithm"
865 select CRYPTO_BLKCIPHER
866 help
867 ARC4 cipher algorithm.
868
869 ARC4 is a stream cipher using keys ranging from 8 bits to 2048
870 bits in length. This algorithm is required for driver-based
871 WEP, but it should not be for other purposes because of the
872 weakness of the algorithm.
873
874 config CRYPTO_BLOWFISH
875 tristate "Blowfish cipher algorithm"
876 select CRYPTO_ALGAPI
877 select CRYPTO_BLOWFISH_COMMON
878 help
879 Blowfish cipher algorithm, by Bruce Schneier.
880
881 This is a variable key length cipher which can use keys from 32
882 bits to 448 bits in length. It's fast, simple and specifically
883 designed for use on "large microprocessors".
884
885 See also:
886 <http://www.schneier.com/blowfish.html>
887
888 config CRYPTO_BLOWFISH_COMMON
889 tristate
890 help
891 Common parts of the Blowfish cipher algorithm shared by the
892 generic c and the assembler implementations.
893
894 See also:
895 <http://www.schneier.com/blowfish.html>
896
897 config CRYPTO_BLOWFISH_X86_64
898 tristate "Blowfish cipher algorithm (x86_64)"
899 depends on X86 && 64BIT
900 select CRYPTO_ALGAPI
901 select CRYPTO_BLOWFISH_COMMON
902 help
903 Blowfish cipher algorithm (x86_64), by Bruce Schneier.
904
905 This is a variable key length cipher which can use keys from 32
906 bits to 448 bits in length. It's fast, simple and specifically
907 designed for use on "large microprocessors".
908
909 See also:
910 <http://www.schneier.com/blowfish.html>
911
912 config CRYPTO_CAMELLIA
913 tristate "Camellia cipher algorithms"
914 depends on CRYPTO
915 select CRYPTO_ALGAPI
916 help
917 Camellia cipher algorithms module.
918
919 Camellia is a symmetric key block cipher developed jointly
920 at NTT and Mitsubishi Electric Corporation.
921
922 The Camellia specifies three key sizes: 128, 192 and 256 bits.
923
924 See also:
925 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
926
927 config CRYPTO_CAMELLIA_X86_64
928 tristate "Camellia cipher algorithm (x86_64)"
929 depends on X86 && 64BIT
930 depends on CRYPTO
931 select CRYPTO_ALGAPI
932 select CRYPTO_GLUE_HELPER_X86
933 select CRYPTO_LRW
934 select CRYPTO_XTS
935 help
936 Camellia cipher algorithm module (x86_64).
937
938 Camellia is a symmetric key block cipher developed jointly
939 at NTT and Mitsubishi Electric Corporation.
940
941 The Camellia specifies three key sizes: 128, 192 and 256 bits.
942
943 See also:
944 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
945
946 config CRYPTO_CAMELLIA_AESNI_AVX_X86_64
947 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX)"
948 depends on X86 && 64BIT
949 depends on CRYPTO
950 select CRYPTO_ALGAPI
951 select CRYPTO_CRYPTD
952 select CRYPTO_ABLK_HELPER
953 select CRYPTO_GLUE_HELPER_X86
954 select CRYPTO_CAMELLIA_X86_64
955 select CRYPTO_LRW
956 select CRYPTO_XTS
957 help
958 Camellia cipher algorithm module (x86_64/AES-NI/AVX).
959
960 Camellia is a symmetric key block cipher developed jointly
961 at NTT and Mitsubishi Electric Corporation.
962
963 The Camellia specifies three key sizes: 128, 192 and 256 bits.
964
965 See also:
966 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
967
968 config CRYPTO_CAMELLIA_AESNI_AVX2_X86_64
969 tristate "Camellia cipher algorithm (x86_64/AES-NI/AVX2)"
970 depends on X86 && 64BIT
971 depends on CRYPTO
972 select CRYPTO_ALGAPI
973 select CRYPTO_CRYPTD
974 select CRYPTO_ABLK_HELPER
975 select CRYPTO_GLUE_HELPER_X86
976 select CRYPTO_CAMELLIA_X86_64
977 select CRYPTO_CAMELLIA_AESNI_AVX_X86_64
978 select CRYPTO_LRW
979 select CRYPTO_XTS
980 help
981 Camellia cipher algorithm module (x86_64/AES-NI/AVX2).
982
983 Camellia is a symmetric key block cipher developed jointly
984 at NTT and Mitsubishi Electric Corporation.
985
986 The Camellia specifies three key sizes: 128, 192 and 256 bits.
987
988 See also:
989 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
990
991 config CRYPTO_CAMELLIA_SPARC64
992 tristate "Camellia cipher algorithm (SPARC64)"
993 depends on SPARC64
994 depends on CRYPTO
995 select CRYPTO_ALGAPI
996 help
997 Camellia cipher algorithm module (SPARC64).
998
999 Camellia is a symmetric key block cipher developed jointly
1000 at NTT and Mitsubishi Electric Corporation.
1001
1002 The Camellia specifies three key sizes: 128, 192 and 256 bits.
1003
1004 See also:
1005 <https://info.isl.ntt.co.jp/crypt/eng/camellia/index_s.html>
1006
1007 config CRYPTO_CAST_COMMON
1008 tristate
1009 help
1010 Common parts of the CAST cipher algorithms shared by the
1011 generic c and the assembler implementations.
1012
1013 config CRYPTO_CAST5
1014 tristate "CAST5 (CAST-128) cipher algorithm"
1015 select CRYPTO_ALGAPI
1016 select CRYPTO_CAST_COMMON
1017 help
1018 The CAST5 encryption algorithm (synonymous with CAST-128) is
1019 described in RFC2144.
1020
1021 config CRYPTO_CAST5_AVX_X86_64
1022 tristate "CAST5 (CAST-128) cipher algorithm (x86_64/AVX)"
1023 depends on X86 && 64BIT
1024 select CRYPTO_ALGAPI
1025 select CRYPTO_CRYPTD
1026 select CRYPTO_ABLK_HELPER
1027 select CRYPTO_CAST_COMMON
1028 select CRYPTO_CAST5
1029 help
1030 The CAST5 encryption algorithm (synonymous with CAST-128) is
1031 described in RFC2144.
1032
1033 This module provides the Cast5 cipher algorithm that processes
1034 sixteen blocks parallel using the AVX instruction set.
1035
1036 config CRYPTO_CAST6
1037 tristate "CAST6 (CAST-256) cipher algorithm"
1038 select CRYPTO_ALGAPI
1039 select CRYPTO_CAST_COMMON
1040 help
1041 The CAST6 encryption algorithm (synonymous with CAST-256) is
1042 described in RFC2612.
1043
1044 config CRYPTO_CAST6_AVX_X86_64
1045 tristate "CAST6 (CAST-256) cipher algorithm (x86_64/AVX)"
1046 depends on X86 && 64BIT
1047 select CRYPTO_ALGAPI
1048 select CRYPTO_CRYPTD
1049 select CRYPTO_ABLK_HELPER
1050 select CRYPTO_GLUE_HELPER_X86
1051 select CRYPTO_CAST_COMMON
1052 select CRYPTO_CAST6
1053 select CRYPTO_LRW
1054 select CRYPTO_XTS
1055 help
1056 The CAST6 encryption algorithm (synonymous with CAST-256) is
1057 described in RFC2612.
1058
1059 This module provides the Cast6 cipher algorithm that processes
1060 eight blocks parallel using the AVX instruction set.
1061
1062 config CRYPTO_DES
1063 tristate "DES and Triple DES EDE cipher algorithms"
1064 select CRYPTO_ALGAPI
1065 help
1066 DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3).
1067
1068 config CRYPTO_DES_SPARC64
1069 tristate "DES and Triple DES EDE cipher algorithms (SPARC64)"
1070 depends on SPARC64
1071 select CRYPTO_ALGAPI
1072 select CRYPTO_DES
1073 help
1074 DES cipher algorithm (FIPS 46-2), and Triple DES EDE (FIPS 46-3),
1075 optimized using SPARC64 crypto opcodes.
1076
1077 config CRYPTO_DES3_EDE_X86_64
1078 tristate "Triple DES EDE cipher algorithm (x86-64)"
1079 depends on X86 && 64BIT
1080 select CRYPTO_ALGAPI
1081 select CRYPTO_DES
1082 help
1083 Triple DES EDE (FIPS 46-3) algorithm.
1084
1085 This module provides implementation of the Triple DES EDE cipher
1086 algorithm that is optimized for x86-64 processors. Two versions of
1087 algorithm are provided; regular processing one input block and
1088 one that processes three blocks parallel.
1089
1090 config CRYPTO_FCRYPT
1091 tristate "FCrypt cipher algorithm"
1092 select CRYPTO_ALGAPI
1093 select CRYPTO_BLKCIPHER
1094 help
1095 FCrypt algorithm used by RxRPC.
1096
1097 config CRYPTO_KHAZAD
1098 tristate "Khazad cipher algorithm"
1099 select CRYPTO_ALGAPI
1100 help
1101 Khazad cipher algorithm.
1102
1103 Khazad was a finalist in the initial NESSIE competition. It is
1104 an algorithm optimized for 64-bit processors with good performance
1105 on 32-bit processors. Khazad uses an 128 bit key size.
1106
1107 See also:
1108 <http://www.larc.usp.br/~pbarreto/KhazadPage.html>
1109
1110 config CRYPTO_SALSA20
1111 tristate "Salsa20 stream cipher algorithm"
1112 select CRYPTO_BLKCIPHER
1113 help
1114 Salsa20 stream cipher algorithm.
1115
1116 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1117 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1118
1119 The Salsa20 stream cipher algorithm is designed by Daniel J.
1120 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1121
1122 config CRYPTO_SALSA20_586
1123 tristate "Salsa20 stream cipher algorithm (i586)"
1124 depends on (X86 || UML_X86) && !64BIT
1125 select CRYPTO_BLKCIPHER
1126 help
1127 Salsa20 stream cipher algorithm.
1128
1129 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1130 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1131
1132 The Salsa20 stream cipher algorithm is designed by Daniel J.
1133 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1134
1135 config CRYPTO_SALSA20_X86_64
1136 tristate "Salsa20 stream cipher algorithm (x86_64)"
1137 depends on (X86 || UML_X86) && 64BIT
1138 select CRYPTO_BLKCIPHER
1139 help
1140 Salsa20 stream cipher algorithm.
1141
1142 Salsa20 is a stream cipher submitted to eSTREAM, the ECRYPT
1143 Stream Cipher Project. See <http://www.ecrypt.eu.org/stream/>
1144
1145 The Salsa20 stream cipher algorithm is designed by Daniel J.
1146 Bernstein <djb@cr.yp.to>. See <http://cr.yp.to/snuffle.html>
1147
1148 config CRYPTO_SEED
1149 tristate "SEED cipher algorithm"
1150 select CRYPTO_ALGAPI
1151 help
1152 SEED cipher algorithm (RFC4269).
1153
1154 SEED is a 128-bit symmetric key block cipher that has been
1155 developed by KISA (Korea Information Security Agency) as a
1156 national standard encryption algorithm of the Republic of Korea.
1157 It is a 16 round block cipher with the key size of 128 bit.
1158
1159 See also:
1160 <http://www.kisa.or.kr/kisa/seed/jsp/seed_eng.jsp>
1161
1162 config CRYPTO_SERPENT
1163 tristate "Serpent cipher algorithm"
1164 select CRYPTO_ALGAPI
1165 help
1166 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1167
1168 Keys are allowed to be from 0 to 256 bits in length, in steps
1169 of 8 bits. Also includes the 'Tnepres' algorithm, a reversed
1170 variant of Serpent for compatibility with old kerneli.org code.
1171
1172 See also:
1173 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1174
1175 config CRYPTO_SERPENT_SSE2_X86_64
1176 tristate "Serpent cipher algorithm (x86_64/SSE2)"
1177 depends on X86 && 64BIT
1178 select CRYPTO_ALGAPI
1179 select CRYPTO_CRYPTD
1180 select CRYPTO_ABLK_HELPER
1181 select CRYPTO_GLUE_HELPER_X86
1182 select CRYPTO_SERPENT
1183 select CRYPTO_LRW
1184 select CRYPTO_XTS
1185 help
1186 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1187
1188 Keys are allowed to be from 0 to 256 bits in length, in steps
1189 of 8 bits.
1190
1191 This module provides Serpent cipher algorithm that processes eight
1192 blocks parallel using SSE2 instruction set.
1193
1194 See also:
1195 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1196
1197 config CRYPTO_SERPENT_SSE2_586
1198 tristate "Serpent cipher algorithm (i586/SSE2)"
1199 depends on X86 && !64BIT
1200 select CRYPTO_ALGAPI
1201 select CRYPTO_CRYPTD
1202 select CRYPTO_ABLK_HELPER
1203 select CRYPTO_GLUE_HELPER_X86
1204 select CRYPTO_SERPENT
1205 select CRYPTO_LRW
1206 select CRYPTO_XTS
1207 help
1208 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1209
1210 Keys are allowed to be from 0 to 256 bits in length, in steps
1211 of 8 bits.
1212
1213 This module provides Serpent cipher algorithm that processes four
1214 blocks parallel using SSE2 instruction set.
1215
1216 See also:
1217 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1218
1219 config CRYPTO_SERPENT_AVX_X86_64
1220 tristate "Serpent cipher algorithm (x86_64/AVX)"
1221 depends on X86 && 64BIT
1222 select CRYPTO_ALGAPI
1223 select CRYPTO_CRYPTD
1224 select CRYPTO_ABLK_HELPER
1225 select CRYPTO_GLUE_HELPER_X86
1226 select CRYPTO_SERPENT
1227 select CRYPTO_LRW
1228 select CRYPTO_XTS
1229 help
1230 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1231
1232 Keys are allowed to be from 0 to 256 bits in length, in steps
1233 of 8 bits.
1234
1235 This module provides the Serpent cipher algorithm that processes
1236 eight blocks parallel using the AVX instruction set.
1237
1238 See also:
1239 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1240
1241 config CRYPTO_SERPENT_AVX2_X86_64
1242 tristate "Serpent cipher algorithm (x86_64/AVX2)"
1243 depends on X86 && 64BIT
1244 select CRYPTO_ALGAPI
1245 select CRYPTO_CRYPTD
1246 select CRYPTO_ABLK_HELPER
1247 select CRYPTO_GLUE_HELPER_X86
1248 select CRYPTO_SERPENT
1249 select CRYPTO_SERPENT_AVX_X86_64
1250 select CRYPTO_LRW
1251 select CRYPTO_XTS
1252 help
1253 Serpent cipher algorithm, by Anderson, Biham & Knudsen.
1254
1255 Keys are allowed to be from 0 to 256 bits in length, in steps
1256 of 8 bits.
1257
1258 This module provides Serpent cipher algorithm that processes 16
1259 blocks parallel using AVX2 instruction set.
1260
1261 See also:
1262 <http://www.cl.cam.ac.uk/~rja14/serpent.html>
1263
1264 config CRYPTO_TEA
1265 tristate "TEA, XTEA and XETA cipher algorithms"
1266 select CRYPTO_ALGAPI
1267 help
1268 TEA cipher algorithm.
1269
1270 Tiny Encryption Algorithm is a simple cipher that uses
1271 many rounds for security. It is very fast and uses
1272 little memory.
1273
1274 Xtendend Tiny Encryption Algorithm is a modification to
1275 the TEA algorithm to address a potential key weakness
1276 in the TEA algorithm.
1277
1278 Xtendend Encryption Tiny Algorithm is a mis-implementation
1279 of the XTEA algorithm for compatibility purposes.
1280
1281 config CRYPTO_TWOFISH
1282 tristate "Twofish cipher algorithm"
1283 select CRYPTO_ALGAPI
1284 select CRYPTO_TWOFISH_COMMON
1285 help
1286 Twofish cipher algorithm.
1287
1288 Twofish was submitted as an AES (Advanced Encryption Standard)
1289 candidate cipher by researchers at CounterPane Systems. It is a
1290 16 round block cipher supporting key sizes of 128, 192, and 256
1291 bits.
1292
1293 See also:
1294 <http://www.schneier.com/twofish.html>
1295
1296 config CRYPTO_TWOFISH_COMMON
1297 tristate
1298 help
1299 Common parts of the Twofish cipher algorithm shared by the
1300 generic c and the assembler implementations.
1301
1302 config CRYPTO_TWOFISH_586
1303 tristate "Twofish cipher algorithms (i586)"
1304 depends on (X86 || UML_X86) && !64BIT
1305 select CRYPTO_ALGAPI
1306 select CRYPTO_TWOFISH_COMMON
1307 help
1308 Twofish cipher algorithm.
1309
1310 Twofish was submitted as an AES (Advanced Encryption Standard)
1311 candidate cipher by researchers at CounterPane Systems. It is a
1312 16 round block cipher supporting key sizes of 128, 192, and 256
1313 bits.
1314
1315 See also:
1316 <http://www.schneier.com/twofish.html>
1317
1318 config CRYPTO_TWOFISH_X86_64
1319 tristate "Twofish cipher algorithm (x86_64)"
1320 depends on (X86 || UML_X86) && 64BIT
1321 select CRYPTO_ALGAPI
1322 select CRYPTO_TWOFISH_COMMON
1323 help
1324 Twofish cipher algorithm (x86_64).
1325
1326 Twofish was submitted as an AES (Advanced Encryption Standard)
1327 candidate cipher by researchers at CounterPane Systems. It is a
1328 16 round block cipher supporting key sizes of 128, 192, and 256
1329 bits.
1330
1331 See also:
1332 <http://www.schneier.com/twofish.html>
1333
1334 config CRYPTO_TWOFISH_X86_64_3WAY
1335 tristate "Twofish cipher algorithm (x86_64, 3-way parallel)"
1336 depends on X86 && 64BIT
1337 select CRYPTO_ALGAPI
1338 select CRYPTO_TWOFISH_COMMON
1339 select CRYPTO_TWOFISH_X86_64
1340 select CRYPTO_GLUE_HELPER_X86
1341 select CRYPTO_LRW
1342 select CRYPTO_XTS
1343 help
1344 Twofish cipher algorithm (x86_64, 3-way parallel).
1345
1346 Twofish was submitted as an AES (Advanced Encryption Standard)
1347 candidate cipher by researchers at CounterPane Systems. It is a
1348 16 round block cipher supporting key sizes of 128, 192, and 256
1349 bits.
1350
1351 This module provides Twofish cipher algorithm that processes three
1352 blocks parallel, utilizing resources of out-of-order CPUs better.
1353
1354 See also:
1355 <http://www.schneier.com/twofish.html>
1356
1357 config CRYPTO_TWOFISH_AVX_X86_64
1358 tristate "Twofish cipher algorithm (x86_64/AVX)"
1359 depends on X86 && 64BIT
1360 select CRYPTO_ALGAPI
1361 select CRYPTO_CRYPTD
1362 select CRYPTO_ABLK_HELPER
1363 select CRYPTO_GLUE_HELPER_X86
1364 select CRYPTO_TWOFISH_COMMON
1365 select CRYPTO_TWOFISH_X86_64
1366 select CRYPTO_TWOFISH_X86_64_3WAY
1367 select CRYPTO_LRW
1368 select CRYPTO_XTS
1369 help
1370 Twofish cipher algorithm (x86_64/AVX).
1371
1372 Twofish was submitted as an AES (Advanced Encryption Standard)
1373 candidate cipher by researchers at CounterPane Systems. It is a
1374 16 round block cipher supporting key sizes of 128, 192, and 256
1375 bits.
1376
1377 This module provides the Twofish cipher algorithm that processes
1378 eight blocks parallel using the AVX Instruction Set.
1379
1380 See also:
1381 <http://www.schneier.com/twofish.html>
1382
1383 comment "Compression"
1384
1385 config CRYPTO_DEFLATE
1386 tristate "Deflate compression algorithm"
1387 select CRYPTO_ALGAPI
1388 select ZLIB_INFLATE
1389 select ZLIB_DEFLATE
1390 help
1391 This is the Deflate algorithm (RFC1951), specified for use in
1392 IPSec with the IPCOMP protocol (RFC3173, RFC2394).
1393
1394 You will most probably want this if using IPSec.
1395
1396 config CRYPTO_ZLIB
1397 tristate "Zlib compression algorithm"
1398 select CRYPTO_PCOMP
1399 select ZLIB_INFLATE
1400 select ZLIB_DEFLATE
1401 select NLATTR
1402 help
1403 This is the zlib algorithm.
1404
1405 config CRYPTO_LZO
1406 tristate "LZO compression algorithm"
1407 select CRYPTO_ALGAPI
1408 select LZO_COMPRESS
1409 select LZO_DECOMPRESS
1410 help
1411 This is the LZO algorithm.
1412
1413 config CRYPTO_842
1414 tristate "842 compression algorithm"
1415 select CRYPTO_ALGAPI
1416 select 842_COMPRESS
1417 select 842_DECOMPRESS
1418 help
1419 This is the 842 algorithm.
1420
1421 config CRYPTO_LZ4
1422 tristate "LZ4 compression algorithm"
1423 select CRYPTO_ALGAPI
1424 select LZ4_COMPRESS
1425 select LZ4_DECOMPRESS
1426 help
1427 This is the LZ4 algorithm.
1428
1429 config CRYPTO_LZ4HC
1430 tristate "LZ4HC compression algorithm"
1431 select CRYPTO_ALGAPI
1432 select LZ4HC_COMPRESS
1433 select LZ4_DECOMPRESS
1434 help
1435 This is the LZ4 high compression mode algorithm.
1436
1437 comment "Random Number Generation"
1438
1439 config CRYPTO_ANSI_CPRNG
1440 tristate "Pseudo Random Number Generation for Cryptographic modules"
1441 default m
1442 select CRYPTO_AES
1443 select CRYPTO_RNG
1444 help
1445 This option enables the generic pseudo random number generator
1446 for cryptographic modules. Uses the Algorithm specified in
1447 ANSI X9.31 A.2.4. Note that this option must be enabled if
1448 CRYPTO_FIPS is selected
1449
1450 menuconfig CRYPTO_DRBG_MENU
1451 tristate "NIST SP800-90A DRBG"
1452 help
1453 NIST SP800-90A compliant DRBG. In the following submenu, one or
1454 more of the DRBG types must be selected.
1455
1456 if CRYPTO_DRBG_MENU
1457
1458 config CRYPTO_DRBG_HMAC
1459 bool "Enable HMAC DRBG"
1460 default y
1461 select CRYPTO_HMAC
1462 help
1463 Enable the HMAC DRBG variant as defined in NIST SP800-90A.
1464
1465 config CRYPTO_DRBG_HASH
1466 bool "Enable Hash DRBG"
1467 select CRYPTO_HASH
1468 help
1469 Enable the Hash DRBG variant as defined in NIST SP800-90A.
1470
1471 config CRYPTO_DRBG_CTR
1472 bool "Enable CTR DRBG"
1473 select CRYPTO_AES
1474 help
1475 Enable the CTR DRBG variant as defined in NIST SP800-90A.
1476
1477 config CRYPTO_DRBG
1478 tristate
1479 default CRYPTO_DRBG_MENU if (CRYPTO_DRBG_HMAC || CRYPTO_DRBG_HASH || CRYPTO_DRBG_CTR)
1480 select CRYPTO_RNG
1481
1482 endif # if CRYPTO_DRBG_MENU
1483
1484 config CRYPTO_USER_API
1485 tristate
1486
1487 config CRYPTO_USER_API_HASH
1488 tristate "User-space interface for hash algorithms"
1489 depends on NET
1490 select CRYPTO_HASH
1491 select CRYPTO_USER_API
1492 help
1493 This option enables the user-spaces interface for hash
1494 algorithms.
1495
1496 config CRYPTO_USER_API_SKCIPHER
1497 tristate "User-space interface for symmetric key cipher algorithms"
1498 depends on NET
1499 select CRYPTO_BLKCIPHER
1500 select CRYPTO_USER_API
1501 help
1502 This option enables the user-spaces interface for symmetric
1503 key cipher algorithms.
1504
1505 config CRYPTO_USER_API_RNG
1506 tristate "User-space interface for random number generator algorithms"
1507 depends on NET
1508 select CRYPTO_RNG
1509 select CRYPTO_USER_API
1510 help
1511 This option enables the user-spaces interface for random
1512 number generator algorithms.
1513
1514 config CRYPTO_USER_API_AEAD
1515 tristate "User-space interface for AEAD cipher algorithms"
1516 depends on NET
1517 select CRYPTO_AEAD
1518 select CRYPTO_USER_API
1519 help
1520 This option enables the user-spaces interface for AEAD
1521 cipher algorithms.
1522
1523 config CRYPTO_HASH_INFO
1524 bool
1525
1526 source "drivers/crypto/Kconfig"
1527 source crypto/asymmetric_keys/Kconfig
1528
1529 endif # if CRYPTO