1 libpve-network-perl (0.6.0) pve; urgency=medium
3 * zones: QinQ: classic bridge: fix bridge zone name with multiple zones/vnets
5 * zones: QinQ: ovs: fix duplicate ovs_ports with multiple zones/vnets
7 * d/control: fix package description
9 * zone: QinQ: add VNet without tag support
11 * zone/subnets: fix more cases when no IPAM is defined in the configuration
13 * zones: simple, evpn: only enable IP-forwarding if a gateway is defined on
16 -- Proxmox Support Team <support@proxmox.com> Mon, 10 May 2021 10:44:56 +0200
18 libpve-network-perl (0.5-2) pve; urgency=medium
20 * zones: make IPAM config optional for all zone plugins
22 * zone status: mark VNets with unknown zone as failed and early return to
23 avoid spamming the log with 'Use of uninitialized value' messages.
25 -- Proxmox Support Team <support@proxmox.com> Wed, 28 Apr 2021 18:25:18 +0200
27 libpve-network-perl (0.5-1) pve; urgency=medium
29 * add foundation for IP Adresss Management (IPAM)
32 + zones: simple|evpn: add gateway ip from subnets to vnet
36 * fix vnet gateway for routed setup + /32 pointopoint subnet
38 * api: generate 'running-config' state instead of version increase on apply
40 * api: add running/pending zones/vnets/subnets/controllers
42 * zones: evpn : add support for loopback
44 * zones: evpn/simple: add missing mask to gateway address
46 * evpn: frr: use datacenter default profile (lower timeouts)
48 * get local VNets: display vnet alias in comments
50 * use canonical ipv6 address (RFC 5952) everywhere
52 * zones: evpn: fix exitnodes for SNAT
54 * zones: evpn: move vnet mac option to evpn zone plugin
56 * zones: evpn: fix arp-accept and ip-forward with IPv6 SNAT
58 * zones: simple: fix ip-forward && IPv6 SNAT
60 * controllers: increase controllerid to 64 characters max
62 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 16:51:32 +0200
64 libpve-network-perl (0.4-7) pve; urgency=medium
68 * use more flexible split_list for ip lists to allow various common separators
70 * vnet: make tag optional and verify value in zone plugins
72 * add a 'simple' plugin
74 -- Proxmox Support Team <support@proxmox.com> Fri, 03 Jul 2020 14:14:48 +0200
76 libpve-network-perl (0.4-6) pve; urgency=medium
78 * add vnet vlan-aware option for layer2 plugins
80 * vlan: ovs: use dot1q-tunnel with 802.1q when vlanaware is enabled
82 * qinq|vlan: ovs: add ovsint interfaces to ovs-ports list
84 * vlan|qinq: add mtu to ovsint link port
86 -- Proxmox Support Team <support@proxmox.com> Wed, 03 Jun 2020 14:15:42 +0200
88 libpve-network-perl (0.4-5) pve; urgency=medium
90 * api: fix reload-all UPID handling
92 * restrict zone and vnet names to 8 characters
94 * VLAN, QinQ: avoid tagging VM/CT ports directly
96 * VXLAN, EVPN: prefix internal interface names
98 -- Proxmox Support Team <support@proxmox.com> Tue, 19 May 2020 21:23:01 +0200
100 libpve-network-perl (0.4-4) pve; urgency=medium
102 * only parse version if local sdn file exists
104 * d/control: recommend frr-pythontools, ifupdown2
106 * vlan plugin: add support for no vlan-aware bridge
108 -- Proxmox Support Team <support@proxmox.com> Sun, 10 May 2020 17:08:04 +0200
110 libpve-network-perl (0.4-3) pve; urgency=medium
112 * use .version and global lock instead of .new files
114 -- Proxmox Support Team <support@proxmox.com> Sat, 02 May 2020 19:20:33 +0200
116 libpve-network-perl (0.4-2) pve; urgency=medium
118 * vlan/qinq: use vlan-raw-device to support long predictable interfaces name
120 * evpn: add support for local frr.config
122 * controller : evpn : only allow 1 evpn controller
124 * API2: Vnets: fix update
126 * vlan/qinq: use bridge option instead uplink-id
128 * move status code to zone plugin
130 * qinq, vlanplugin: add status
132 * move mtu properties to zone
134 * add get_bridge_vlan
136 * add tap|veth create|plug
138 * add get_local_vnets
140 -- Proxmox Support Team <support@proxmox.com> Wed, 08 Apr 2020 19:58:10 +0200
142 libpve-network-perl (0.3-3) pve; urgency=medium
144 * evpn: remove uplink-id, auto find interfaces instead
146 * zones: vxlan : remove uplink-id (autofind) and multicast (not really used)
148 * ensure /etc/pve/sdn directory is created when writing to configuration
150 -- Proxmox Support Team <support@proxmox.com> Mon, 02 Dec 2019 09:50:39 +0100
152 libpve-network-perl (0.3-2) pve; urgency=medium
154 * add faucet, evpn, qinq Plugins
158 * general refactoring
160 -- Proxmox Support Team <support@proxmox.com> Tue, 26 Nov 2019 12:56:55 +0100
162 libpve-network-perl (0.3-1) pve; urgency=medium
166 * VXLAN: add VRF and VRFVXLAN
168 * VXLAN: add support for ipv4/ipv6/mac for anycast routing
170 * VXLAN: add ip-forward|ip6-forward|arp-accept for routing
172 * VXLAN: add gateway-nodes option
174 * VXLAN: EVPN: fix routing to local vms on gateway nodes
176 * general fixes and improvements
178 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Sep 2019 16:57:42 +0200
180 libpve-network-perl (0.2-1) pve; urgency=medium
184 * improve VNET, VXLAN and VXLAN Multicast plugins
186 * use SDN (Software Defined Network) as base module path
188 -- Proxmox Support Team <support@proxmox.com> Tue, 18 Jun 2019 10:19:25 +0200
190 libpve-network-perl (0.1-1) unstable; urgency=medium
194 -- Proxmox Support Team <support@proxmox.com> Wed, 27 Mar 2019 12:50:26 +0100