1 openvswitch (2.8.0-1) unstable; urgency=medium
4 * Use debhelper for DEB_VERSION_UPSTREAM. Thanks to Clint Byrum
5 <spamaps@debian.org> for this improvement.
8 -- Open vSwitch team <dev@openvswitch.org> Thu, 31 Aug 2017 09:32:16 -0700
10 openvswitch (2.7.0-1) unstable; urgency=low
12 * New upstream version
13 - Utilities and daemons that support SSL now allow protocols and
14 ciphers to be configured with --ssl-protocols and --ssl-ciphers.
16 * QoS is now implemented via egress shaping rather than ingress policing.
17 * DSCP marking is now supported, via the new northbound QoS table.
18 * IPAM now supports fixed MAC addresses.
19 * Support for source IP address based routing.
21 - New --ovs option to also print OpenFlow flows.
22 - put_dhcp_opts and put_dhcp_optsv6 actions may now be traced.
23 * Support for managing SSL and remote connection configuration in
24 northbound and southbound databases.
25 * TCP connections to northbound and southbound databases are no
26 longer enabled by default and must be explicitly configured.
27 See documentation for ovn-sbctl/ovn-nbctl "set-connection"
28 command or the ovn-ctl "--db-sb-create-insecure-remote" and
29 "--db-nb-create-insecure-remote" command-line options for
30 information regarding remote connection configuration.
31 * New appctl "inject-pkt" command in ovn-controller that allows
32 packets to be injected into the connected OVS instance.
33 * Distributed logical routers may now be connected directly to
34 logical switches with localnet ports, by specifying a
35 "redirect-chassis" on the distributed gateway port of the
36 logical router. NAT rules may be specified directly on the
37 distributed logical router, and are handled either centrally on
38 the "redirect-chassis", or in many cases are handled locally on
39 the hypervisor where the corresponding logical port resides.
40 Gratuitous ARP for NAT addresses on a distributed logical
41 router is not yet supported, but will be added in a future
43 - Fixed regression in table stats maintenance introduced in OVS
44 2.3.0, wherein the number of OpenFlow table hits and misses was
47 * OFPT_PACKET_OUT messages are now supported in bundles.
48 * A new "selection_method=dp_hash" type for OpenFlow select group
49 bucket selection that uses the datapath computed 5-tuple hash
50 without making datapath flows match the 5-tuple fields, which
51 is useful for more efficient load balancing, for example. This
52 uses the Netronome extension to OpenFlow 1.5+ that allows
53 control over the OpenFlow select groups selection method. See
54 "selection_method" and related options in ovs-ofctl(8) for
56 * The "sample" action now supports "ingress" and "egress" options.
57 * The "ct" action now supports the TFTP ALG where support is available.
58 * New actions "clone" and "ct_clear".
60 * 'bundle' command now supports packet-out messages.
61 * New syntax for 'ovs-ofctl packet-out' command, which uses the
62 same string parser as the 'bundle' command. The old 'packet-out'
63 syntax is deprecated and will be removed in a later OVS
65 * New unixctl "ofctl/packet-out" command, which can be used to
66 instruct a flow monitor to issue OpenFlow packet-out messages.
68 * Remote connections can now be made read-only (see ovsdb-server(1)).
70 * TLV mappings for protocols such as Geneve are now segregated on
71 a per-OpenFlow bridge basis rather than globally. (The interface
73 * Removed support for IPsec tunnels.
75 * New option 'n_rxq_desc' and 'n_txq_desc' fields for DPDK interfaces
76 which set the number of rx and tx descriptors to use for the given port.
77 * Support for DPDK v16.11.
78 * Support for rx checksum offload. Refer DPDK HOWTO for details.
79 * Port Hotplug is now supported.
80 * DPDK physical ports can now have arbitrary names. The PCI address of
81 the device must be set using the 'dpdk-devargs' option. Compatibility
82 with the old dpdk<portid> naming scheme is broken, and as such a
83 device will not be available for use until a valid dpdk-devargs is
85 * Virtual DPDK Poll Mode Driver (vdev PMD) support.
86 * Removed experimental tag.
88 * A package upgrade does not automatically restart OVS service.
89 - ovs-vswitchd/ovs-vsctl:
90 * Ports now have a "protected" flag. Protected ports can not forward
91 frames to other protected ports. Unprotected ports can receive and
92 forward frames to protected and other unprotected ports.
93 - ovs-vsctl, ovn-nbctl, ovn-sbctl, vtep-ctl:
94 * Database commands now accept integer ranges, e.g. "set port
95 eth0 trunks=1-10" to enable trunking VLANs 1 to 10.
97 -- Open vSwitch team <dev@openvswitch.org> Tue, 21 Feb 2017 13:57:33 -0700
99 openvswitch (2.6.0-1) unstable; urgency=low
100 [ Open vSwitch team ]
101 * New upstream version
102 - First supported release of OVN. See ovn-architecture(7) for more
105 * New "monitor_cond" "monitor_cond_update" and "update2" extensions to
108 * OpenFlow 1.3+ bundles are now supported for group mods as well as
109 flow mods and port mods. Both 'atomic' and 'ordered' bundle
110 flags are supported for group mods as well as flow mods.
111 * OpenFlow 1.1+ OFPT_QUEUE_GET_CONFIG_REQUEST now supports OFPP_ANY.
112 * OpenFlow 1.4+ OFPMP_QUEUE_DESC is now supported.
113 * OpenFlow 1.4+ OFPT_TABLE_STATUS is now supported.
114 * New property-based packet-in message format NXT_PACKET_IN2 with support
115 for arbitrary user-provided data and for serializing flow table
116 traversal into a continuation for later resumption.
117 * New extension message NXT_SET_ASYNC_CONFIG2 to allow OpenFlow 1.4-like
118 control over asynchronous messages in earlier versions of OpenFlow.
119 * OpenFlow 1.3 Extension 230, adding OpenFlow Bundles support, is
120 now implemented. Only flow mod and port mod messages are supported
122 * New OpenFlow extension NXM_NX_MPLS_TTL to provide access to MPLS TTL.
123 * New output option, output(port=N,max_len=M), to allow truncating a
124 packet to size M bytes when outputting to port N.
125 * New command OFPGC_ADD_OR_MOD for OFPT_GROUP_MOD message that adds a
126 new group or modifies an existing groups
127 * The optional OpenFlow packet buffering feature is deprecated in
128 this release, and will be removed in the next OVS release
129 (2.7). After the change OVS always sends the 'buffer_id' as
130 0xffffffff in packet-in messages and will send an error
131 response if any other value of this field is included in
132 packet-out and flow mod sent by a controller. Controllers are
133 already expected to work properly in cases where the switch can
134 not buffer packets, so this change should not affect existing
136 * New OpenFlow extension NXT_CT_FLUSH_ZONE to flush conntrack zones.
137 - Improved OpenFlow version compatibility for actions:
138 * New OpenFlow extension to support the "group" action in OpenFlow 1.0.
139 * OpenFlow 1.0 "enqueue" action now properly translated to OpenFlow 1.1+.
140 * OpenFlow 1.1 "mod_nw_ecn" and OpenFlow 1.1+ "mod_nw_ttl" actions now
141 properly translated to OpenFlow 1.0.
143 * queue-get-config command now allows a queue ID to be specified.
144 * '--bundle' option can now be used with OpenFlow 1.3 and with group mods.
145 * New "bundle" command allows executing a mixture of flow and group mods
146 as a single atomic transaction.
147 * New option "--color" to produce colorized output for some commands.
148 * New option '--may-create' to use OFPGC_ADD_OR_MOD in mod-group command.
150 * New "sampling_port" option for "sample" action to allow sampling
151 ingress and egress tunnel metadata with IPFIX.
152 * New ovs-ofctl commands "dump-ipfix-bridge" and "dump-ipfix-flow" to
153 dump bridge IPFIX statistics and flow based IPFIX statistics.
154 * New setting other-config:virtual_obs_id to add an arbitrary string
157 * New QoS type "linux-noop" that prevents Open vSwitch from trying to
158 manage QoS for a given port (useful when other software manages QoS).
160 * New option "n_rxq" for PMD interfaces.
161 Old 'other_config:n-dpdk-rxqs' is no longer supported.
162 Not supported by vHost interfaces. For them number of rx and tx queues
163 is applied from connected virtio device.
164 * New 'other_config:pmd-rxq-affinity' field for PMD interfaces, that
165 allows to pin port's rx queues to desired cores.
166 * New appctl command 'dpif-netdev/pmd-rxq-show' to check the port/rxq
168 * Type of log messages from PMD threads changed from INFO to DBG.
169 * QoS functionality with sample egress-policer implementation.
170 * The mechanism for configuring DPDK has changed to use database
171 * Sensible defaults have been introduced for many of the required
172 configuration options
173 * DB entries have been added for many of the DPDK EAL command line
174 arguments. Additional arguments can be passed via the dpdk-extra
176 * Add ingress policing functionality.
177 * PMD threads servicing vHost User ports can now come from the NUMA
178 node that device memory is located on if CONFIG_RTE_LIBRTE_VHOST_NUMA
180 * Basic connection tracking for the userspace datapath (no ALG,
181 fragmentation or NAT support yet)
182 * Support for DPDK 16.07
183 * Optional support for DPDK pdump enabled.
184 * Jumbo frame support
185 * Remove dpdkvhostcuse port type.
186 * OVS client mode for vHost and vHost reconnect (Requires QEMU 2.7)
187 - Increase number of registers to 16.
188 - ovs-benchmark: This utility has been removed due to lack of use and
191 * New "vlog/close" command.
193 * Added the ability to selectively start the forwarding and database
194 functions (ovs-vswitchd and ovsdb-server, respectively).
196 * Remove max number of sessions limit, to enable connection scaling
199 * Added support for Python 3.4+ in addition to existing support
202 * Introduced SELinux policy package.
203 - Datapath Linux kernel compatibility.
204 * Dropped support for kernel older than 3.10.
205 * Removed VLAN splinters feature.
206 * Support for truncate action.
207 * Datapath supports kernel upto 4.6.
209 * Flow based tunnel match and action can be used for IPv6 address using
210 tun_ipv6_src, tun_ipv6_dst fields.
211 * Added support for IPv6 tunnels, for details checkout FAQ.
212 * Deprecated support for IPsec tunnels ports.
213 - A wrapper script, 'ovs-tcpdump', to easily port-mirror an OVS port and
215 - Introduce --no-self-confinement flag that allows daemons to work with
216 sockets outside their run directory.
217 - ovs-pki: Changed message digest algorithm from SHA-1 to SHA-512 because
218 SHA-1 is no longer secure and some operating systems have started to
219 disable it in OpenSSL.
220 - Add 'mtu_request' column to the Interface table. It can be used to
221 configure the MTU of non-internal ports.
223 -- Open vSwitch team <dev@openvswitch.org> Mon, 15 Aug 2016 19:53:13 -0700
225 openvswitch (2.5.0-1) unstable; urgency=low
226 [ Open vSwitch team ]
227 * New upstream version
228 - Dropped support for Python older than version 2.7. As a consequence,
229 using Open vSwitch 2.5 or later on XenServer 6.5 or earlier (which
230 have Python 2.4) requires first installing Python 2.7.
232 * Group chaining (where one OpenFlow group triggers another) is
234 * OpenFlow 1.4+ "importance" is now considered for flow eviction.
235 * OpenFlow 1.4+ OFPTC_EVICTION is now implemented.
236 * OpenFlow 1.4+ OFPTC_VACANCY_EVENTS is now implemented.
237 * OpenFlow 1.4+ OFPMP_TABLE_DESC is now implemented.
238 * Allow modifying the ICMPv4/ICMPv6 type and code fields.
239 * OpenFlow 1.4+ OFPT_SET_ASYNC_CONFIG and OFPT_GET_ASYNC_CONFIG are
242 * New "out_group" keyword for OpenFlow 1.1+ matching on output group.
244 * Geneve tunnels can now match and set options and the OAM bit.
245 * The nonstandard GRE64 tunnel extension has been dropped.
246 - Support Multicast Listener Discovery (MLDv1 and MLDv2).
247 - Add 'symmetric_l3l4' and 'symmetric_l3l4+udp' hash functions.
248 - sFlow agent now reports tunnel and MPLS structures.
249 - New 'check-system-userspace', 'check-kmod' and 'check-kernel' Makefile
250 targets to run a new system testsuite. These tests can be run inside
251 a Vagrant box. See INSTALL.md for details
252 - Mark --syslog-target argument as deprecated. It will be removed in
253 the next OVS release.
254 - Added --user option to all daemons
255 - Add support for connection tracking through the new "ct" action
256 and "ct_state"/"ct_zone"/"ct_mark"/"ct_label" match fields. Only
257 available on Linux kernels with the connection tracking module loaded.
258 - Add experimental version of OVN. OVN, the Open Virtual Network, is a
259 system to support virtual network abstraction. OVN complements the
260 existing capabilities of OVS to add native support for virtual network
261 abstractions, such as virtual L2 and L3 overlays and security groups.
263 -- Open vSwitch team <dev@openvswitch.org> Thu, 03 Dec 2015 23:17:44 -0700
265 openvswitch (2.4.0-1) unstable; urgency=low
266 [ Open vSwitch team ]
267 * New upstream version
268 - Flow table modifications are now atomic, meaning that each packet
269 now sees a coherent version of the OpenFlow pipeline. For
270 example, if a controller removes all flows with a single OpenFlow
271 "flow_mod", no packet sees an intermediate version of the OpenFlow
272 pipeline where only some of the flows have been deleted.
273 - Added support for SFQ, FQ_CoDel and CoDel qdiscs.
274 - Add bash command-line completion support for ovs-vsctl Please check
275 utilities/ovs-command-compgen.INSTALL.md for how to use.
276 - The MAC learning feature now includes per-port fairness to mitigate
277 MAC flooding attacks.
278 - New support for a "conjunctive match" OpenFlow extension, which
279 allows constructing OpenFlow matches of the form "field1 in
280 {a,b,c...} AND field2 in {d,e,f...}" and generalizations. For details,
281 see documentation for the "conjunction" action in ovs-ofctl(8).
282 - Add bash command-line completion support for ovs-appctl/ovs-dpctl/
283 ovs-ofctl/ovsdb-tool commands. Please check
284 utilities/ovs-command-compgen.INSTALL.md for how to use.
285 - The "learn" action supports a new flag "delete_learned" that causes
286 the learned flows to be deleted when the flow with the "learn" action
288 - Basic support for the Geneve tunneling protocol. It is not yet
289 possible to generate or match options. This is planned for a future
290 release. The protocol is documented at
291 http://tools.ietf.org/html/draft-gross-geneve-00
292 - The OVS database now reports controller rate limiting statistics.
293 - sflow now exports information about LACP-based bonds, port names, and
294 OpenFlow port numbers, as well as datapath performance counters.
295 - ovs-dpctl functionality is now available for datapaths integrated
296 into ovs-vswitchd, via ovs-appctl. Some existing ovs-appctl
297 commands are now redundant and will be removed in a future
298 release. See ovs-vswitchd(8) for details.
300 * OpenFlow 1.4 bundles are now supported for flow mods and port
301 mods. For flow mods, both 'atomic' and 'ordered' bundle flags
302 are trivially supported, as all bundled messages are executed
303 in the order they were added and all flow table modifications
304 are now atomic to the datapath. Port mods may not appear in
305 atomic bundles, as port status modifications are not atomic.
306 * IPv6 flow label and neighbor discovery fields are now modifiable.
307 * OpenFlow 1.5 extended registers are now supported.
308 * The OpenFlow 1.5 actset_output field is now supported.
309 * OpenFlow 1.5 Copy-Field action is now supported.
310 * OpenFlow 1.5 masked Set-Field action is now supported.
311 * OpenFlow 1.3+ table features requests are now supported (read-only).
312 * Nicira extension "move" actions may now be included in action sets.
313 * "resubmit" actions may now be included in action sets. The resubmit
314 is executed last, and only if the action set has no "output" or "group"
316 * OpenFlow 1.4+ flow "importance" is now maintained in the flow table.
317 * A new Netronome extension to OpenFlow 1.5+ allows control over the
318 fields hashed for OpenFlow select groups. See "selection_method" and
319 related options in ovs-ofctl(8) for details.
320 - ovs-ofctl has a new '--bundle' option that makes the flow mod commands
321 ('add-flow', 'add-flows', 'mod-flows', 'del-flows', and 'replace-flows')
322 use an OpenFlow 1.4 bundle to operate the modifications as a single
323 atomic transaction. If any of the flow mods in a transaction fail, none
324 of them are executed. All flow mods in a bundle appear to datapath
325 lookups simultaneously.
326 - ovs-ofctl 'add-flow' and 'add-flows' commands now accept arbitrary flow
327 mods as an input by allowing the flow specification to start with an
328 explicit 'add', 'modify', 'modify_strict', 'delete', or 'delete_strict'
329 keyword. A missing keyword is treated as 'add', so this is fully
330 backwards compatible. With the new '--bundle' option all the flow mods
331 are executed as a single atomic transaction using an OpenFlow 1.4 bundle.
332 - ovs-pki: Changed message digest algorithm from MD5 to SHA-1 because
333 MD5 is no longer secure and some operating systems have started to disable
335 - ovsdb-server: New OVSDB protocol extension allows inequality tests on
336 "optional scalar" columns. See ovsdb-server(1) for details.
337 - ovs-vsctl now permits immutable columns in a new row to be modified in
338 the same transaction that creates the row.
339 - test-controller has been renamed ovs-testcontroller at request of users
340 who find it useful for testing basic OpenFlow setups. It is still not
341 a necessary or desirable part of most Open vSwitch deployments.
342 - Support for travis-ci.org based continuous integration builds has been
343 added. Build failures are reported to build@openvswitch.org. See INSTALL.md
344 file for additional details.
345 - Support for the Rapid Spanning Tree Protocol (IEEE 802.1D-2004).
346 The implementation has been tested successfully against the Ixia Automated
347 Network Validation Library (ANVL).
348 - Stats are no longer updated on fake bond interface.
349 - Keep active bond slave selection across OVS restart.
350 - A simple wrapper script, 'ovs-docker', to integrate OVS with Docker
351 containers. If and when there is a native integration of Open vSwitch
352 with Docker, the wrapper script will be retired.
353 - Added support for DPDK Tunneling. VXLAN, GRE, and Geneve are supported
354 protocols. This is generic tunneling mechanism for userspace datapath.
355 - Support for multicast snooping (IGMPv1, IGMPv2 and IGMPv3)
356 - Support for Linux kernels up to 4.0.x
357 - The documentation now use the term 'destination' to mean one of syslog,
358 console or file for vlog logging instead of the previously used term
360 - Support for VXLAN Group Policy extension
361 - Initial support for the IETF Auto-Attach SPBM draft standard. This
362 contains rudimentary support for the LLDP protocol as needed for
364 - The default OpenFlow and OVSDB ports are now the IANA-assigned
365 numbers. OpenFlow is 6653 and OVSDB is 6640.
366 - Support for DPDK vHost.
367 - Support for outer UDP checksums in Geneve and VXLAN.
368 - The kernel vports with dependencies are no longer part of the overall
369 openvswitch.ko but built and loaded automatically as individual kernel
370 modules (vport-*.ko).
371 - Support for STT tunneling.
372 - Support to configure method (--syslog-method argument) that determines
373 how daemons will talk with syslog.
374 - Support for "ovs-appctl vlog/list-pattern" command that lets to query
375 logging message format for each destination.
376 - GRE64 and ipsec_gre64 tunnel protocol is deprecated and will be removed
377 from OVS v2.5 release.
378 * The openvswitch-testcontroller package is new. It reintroduces the
379 simple OpenFlow controller that was packaged with Open vSwitch prior to
380 version 2.1, at request of users who find it useful for testing basic
381 OpenFlow setups. It is still not a necessary or desirable part of most
382 Open vSwitch deployments.
384 -- Open vSwitch team <dev@openvswitch.org> Thu, 20 Aug 2015 17:23:43 -0700
386 openvswitch (2.3.0-1) unstable; urgency=low
387 [ Open vSwitch team ]
388 * New upstream version
389 - OpenFlow 1.1, 1.2, and 1.3 are now enabled by default in
391 - Linux kernel datapath now has an exact match cache optimizing the
392 flow matching process.
393 - Datapath flows now have partially wildcarded tranport port field
394 matches. This reduces userspace upcalls, but increases the
395 number of different masks in the datapath. The kernel datapath
396 exact match cache removes the overhead of matching the incoming
397 packets with the larger number of masks, but when paired with an
398 older kernel module, some workloads may perform worse with the
401 -- Open vSwitch team <dev@openvswitch.org> Thu, 14 Aug 2014 11:03:32 -0700
403 openvswitch (2.2.0-1) unstable; urgency=low
404 [ Open vSwitch team ]
405 * New upstream version
406 - Internal ports are no longer brought up by default, because it
407 should be an administrator task to bring up devices as they are
409 - ovs-vsctl now reports when ovs-vswitchd fails to create a new port or
411 - The "ovsdbmonitor" graphical tool has been removed, because it was
412 poorly maintained and not widely used.
413 - New "check-ryu" Makefile target for running Ryu tests for OpenFlow
414 controllers against Open vSwitch. See INSTALL for details.
415 - Added IPFIX support for SCTP flows and templates for ICMPv4/v6 flows.
416 - Upon the receipt of a SIGHUP signal, ovs-vswitchd no longer reopens its
417 log file (it will terminate instead). Please use 'ovs-appctl vlog/reopen'
419 - Support for Linux kernels up to 3.14. From Kernel 3.12 onwards OVS uses
420 tunnel API for GRE and VXLAN.
421 - Added DPDK support.
422 - Added support for custom vlog patterns in Python
424 -- Open vSwitch team <dev@openvswitch.org> Wed, 19 Mar 2014 16:08:38 -0700
426 openvswitch (2.1.0-1) unstable; urgency=low
427 [ Open vSwitch team ]
428 * New upstream version
429 - Address prefix tracking support for flow tables. New columns
430 "prefixes" in OVS-DB table "Flow_Table" controls which packet
431 header fields are used for address prefix tracking. Prefix
432 tracking allows the classifier to skip rules with longer than
433 necessary prefixes, resulting in better wildcarding for datapath
434 flows. Default configuration is to not use any fields for prefix
435 tracking. However, if any flow tables contain both exact matches
436 and masked matches for IP address fields, OVS performance may be
437 increased by using this feature.
438 * As of now, the fields for which prefix lookup can be enabled
439 are: 'tun_id', 'tun_src', 'tun_dst', 'nw_src', 'nw_dst' (or
440 aliases 'ip_src' and 'ip_dst'), 'ipv6_src', and 'ipv6_dst'.
441 (Using this feature for 'tun_id' would only make sense if the
442 tunnel IDs have prefix structure similar to IP addresses.)
443 * There is a maximum number of fields that can be enabled for any
444 one flow table. Currently this limit is 3.
446 $ ovs-vsctl set Bridge br0 flow_tables:0=@N1 -- \
447 --id=@N1 create Flow_Table name=table0
448 $ ovs-vsctl set Bridge br0 flow_tables:1=@N1 -- \
449 --id=@N1 create Flow_Table name=table1
450 $ ovs-vsctl set Flow_Table table0 prefixes=ip_dst,ip_src
451 $ ovs-vsctl set Flow_Table table1 prefixes=[]
452 - TCP flags matching: OVS now supports matching of TCP flags. This
453 has an adverse performance impact when using OVS userspace 1.10
454 or older (no megaflows support) together with the new OVS kernel
455 module. It is recommended that the kernel and userspace modules
456 both are upgraded at the same time.
457 - The default OpenFlow and OVSDB ports will change to
458 IANA-assigned numbers in a future release. Consider updating
459 your installations to specify port numbers instead of using the
462 * The OpenFlow 1.1+ "Write-Actions" instruction is now supported.
463 * OVS limits the OpenFlow port numbers it assigns to port 32767 and
464 below, leaving port numbers above that range free for assignment
466 * ovs-vswitchd now honors changes to the "ofport_request" column
467 in the Interface table by changing the port's OpenFlow port
469 - ovs-vswitchd.conf.db.5 man page will contain graphviz/dot
470 diagram only if graphviz package was installed at the build time.
471 - Support for Linux kernels up to 3.11
473 The "show" command also displays mega flow mask stats.
475 * New command "ofp-parse-pcap" to dump OpenFlow from PCAP files.
476 - ovs-controller has been renamed test-controller. It is no longer
477 packaged or installed by default, because too many users assumed
478 incorrectly that ovs-controller was a necessary or desirable part
479 of an Open vSwitch deployment.
480 - Added vlog option to export to a UDP syslog sink.
482 * The "monitor" command can now monitor all tables in a database,
483 instead of being limited to a single table.
484 - The flow-eviction-threshold has been replaced by the flow-limit which is a
485 hard limit on the number of flows in the datapath. It defaults to 200,000
486 flows. OVS automatically adjusts this number depending on network
488 * The openvswitch-controller package has been removed, because too many
489 users assumed incorrectly that ovs-controller was a necessary or
490 desirable part of an Open vSwitch deployment.
492 -- Open vSwitch team <dev@openvswitch.org> Wed, 19 Mar 2014 16:08:38 -0700
494 openvswitch (2.0.0-1) unstable; urgency=low
495 [ Open vSwitch team ]
496 * New upstream version
497 - The ovs-vswitchd process is no longer single-threaded. Multiple
498 threads are now used to handle flow set up and asynchronous
501 * Experimental support for OpenFlow 1.1 (in addition to 1.2 and
502 1.3, which had experimental support in 1.10).
503 * New support for matching outer source and destination IP address
504 of tunneled packets, for tunnel ports configured with the newly
505 added "remote_ip=flow" and "local_ip=flow" options.
506 * Support for matching on metadata 'pkt_mark' for interacting with
507 other system components. On Linux this corresponds to the skb
509 * Support matching, rewriting SCTP ports
510 - The Interface table in the database has a new "ifindex" column to
511 report the interface's OS-assigned ifindex.
512 - New "check-oftest" Makefile target for running OFTest against Open
513 vSwitch. See README-OFTest for details.
514 - The flow eviction threshold has been moved to the Open_vSwitch table.
515 - Database names are now mandatory when specifying ovsdb-server options
516 through database paths (e.g. Private key option with the database name
517 should look like "--private-key=db:Open_vSwitch,SSL,private_key").
518 - Added ovs-dev.py, a utility script helpful for Open vSwitch developers.
519 - Support for Linux kernels up to 3.10
521 * New "ofp-parse" for printing OpenFlow messages read from a file.
522 - Added configurable flow caching support to IPFIX exporter.
523 - Dropped support for Linux pre-2.6.32.
524 - Log file timestamps and ovsdb commit timestamps are now reported
525 with millisecond resolution. (Previous versions only reported
528 -- Open vSwitch team <dev@openvswitch.org> Tue, 15 Oct 2013 15:03:42 -0700
530 openvswitch (1.11.0-1) unstable; urgency=low
531 [ Open vSwitch team ]
532 * New upstream version
533 - Support for megaflows, which allows wildcarding in the kernel (and
534 any dpif implementation that supports wildcards). Depending on
535 the flow table and switch configuration, flow set up rates are
536 close to the Linux bridge.
537 - The "tutorial" directory contains a new tutorial for some advanced
538 Open vSwitch features.
539 - Stable bond mode has been removed.
540 - The autopath action has been removed.
541 - New support for the data encapsulation format of the LISP tunnel
542 protocol (RFC 6830). An external control plane or manual flow
543 setup is required for EID-to-RLOC mapping.
545 * The "dec_mpls_ttl" and "set_mpls_ttl" actions from OpenFlow
546 1.1 and later are now implemented.
547 * New "stack" extension for use in actions, to push and pop from
549 * The "load" and "set_field" actions can now modify the "in_port". (This
550 allows one to enable output to a flow's input port by setting the
551 in_port to some unused value, such as OFPP_NONE.)
553 * New debugging commands "add-flow", "mod-flow", "del-flow".
554 - In dpif-based bridges, cache action translations, which can improve
555 flow set up performance by 80% with a complicated flow table.
556 - New syslog format, prefixed with "ovs|", to be easier to filter.
557 - RHEL: Removes the default firewall rule that allowed GRE traffic to
558 pass through. Any users that relied on this automatic firewall hole
559 will have to manually configure it. The ovs-ctl(8) manpage documents
560 the "enable-protocol" command that can be used as an alternative.
561 - New CFM demand mode which uses data traffic to indicate interface
564 -- Open vSwitch team <dev@openvswitch.org> Wed, 28 Aug 2013 14:31:44 -0700
566 openvswitch (1.10.0-1) unstable; urgency=low
567 [ Open vSwitch team ]
568 * New upstream version
569 - Bridge compatibility support has been removed. Any uses that
570 rely on ovs-brcompatd will have to stick with Open vSwitch 1.9.x
571 or adapt to native Open vSwitch support (e.g. use ovs-vsctl instead
573 - The maximum size of the MAC learning table is now configurable.
574 - With the Linux datapath, packets for new flows are now queued
575 separately on a per-port basis, so it should no longer be
576 possible for a large number of new flows arriving on one port to
577 prevent new flows from being processed on other ports.
578 - Many "ovs-vsctl" database commands now accept an --if-exists option.
579 Please refer to the ovs-vsctl manpage for details.
581 - Experimental support for newer versions of OpenFlow. See
582 the "What versions of OpenFlow does Open vSwitch support?"
583 question in the FAQ for more details.
584 - The OpenFlow "dp_desc" may now be configured by setting the
585 value of other-config:dp-desc in the Bridge table.
586 - It is possible to request the OpenFlow port number with the
587 "ofport_request" column in the Interface table.
589 - New support for the VXLAN tunnel protocol (see the IETF draft here:
590 http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-03).
591 - Tunneling requires the version of the kernel module paired with
592 Open vSwitch 1.9.0 or later.
593 - Inheritance of the Don't Fragment bit in IP tunnels (df_inherit)
594 is no longer supported.
595 - Path MTU discovery is no longer supported.
597 - The "dump-flows" and "del-flows" no longer require an argument
598 if only one datapath exists.
600 - New "vlog/disable-rate-limit" and "vlog/enable-rate-limit"
601 commands available allow control over logging rate limits.
602 - New "dpif/dump-dps", "dpif/show", and "dpif/dump-flows" command
603 that mimic the equivalent ovs-dpctl commands.
604 - The ofproto library is now responsible for assigning OpenFlow port
605 numbers. An ofproto implementation should assign them when
606 port_construct() is called.
607 - All dpif-based bridges of a particular type share a common
608 datapath called "ovs-<type>", e.g. "ovs-system". The ovs-dpctl
609 commands will now return information on that shared datapath. To
610 get the equivalent bridge-specific information, use the new
611 "ovs-appctl dpif/*" commands.
612 - Backward-incompatible changes:
613 - Earlier Open vSwitch versions treated ANY as a wildcard in flow
614 syntax. OpenFlow 1.1 adds a port named ANY, which introduces a
615 conflict. ANY was rarely used in flow syntax, so we chose to
616 retire that meaning of ANY in favor of the OpenFlow 1.1 meaning.
617 - Patch ports no longer require kernel support, so they now work
618 with FreeBSD and the kernel module built into Linux 3.3 and later.
620 -- Open vSwitch team <dev@openvswitch.org> Wed, 01 May 2013 14:28:21 -0700
622 openvswitch (1.9.0-1) unstable; urgency=low
623 [ Open vSwitch team ]
624 * New upstream version
626 - Support for ipv6 set action.
627 - SKB mark matching and setting.
628 - support for Linux kernels up to 3.8
629 - FreeBSD is now a supported platform, thanks to code contributions from
630 Gaetano Catalli, Ed Maste, and Giuseppe Lettieri.
631 - ovs-bugtool: New --ovs option to report only OVS related information.
632 - New %t and %T log escapes to identify the subprogram within a
633 cooperating group of processes or threads that emitted a log message.
634 The default log patterns now include this information.
636 - Allow bitwise masking for SHA and THA fields in ARP, SLL and TLL
637 fields in IPv6 neighbor discovery messages, and IPv6 flow label.
638 - Adds support for writing to the metadata field for a flow.
640 - The tunneling code no longer assumes input and output keys are
641 symmetric. If they are not, PMTUD needs to be disabled for
642 tunneling to work. Note this only applies to flow-based keys.
643 - New support for a nonstandard form of GRE that supports a 64-bit key.
644 - Tunnel Path MTU Discovery default value was set to 'disabled'.
645 This feature is deprecated and will be removed soon.
646 - Tunnel header caching removed.
648 - Commands and actions that accept port numbers now also accept keywords
649 that represent those ports (such as LOCAL, NONE, and ALL). This is
650 also the recommended way to specify these ports, for compatibility
651 with OpenFlow 1.1 and later (which use the OpenFlow 1.0 numbers
652 for these ports for different purposes).
654 - Support requesting the port number with the "port_no" option in
655 the "add-if" command.
656 - ovs-pki: The "online PKI" features have been removed, along with
657 the ovs-pki-cgi program that facilitated it, because of some
658 alarmist insecurity claims. We do not believe that these claims
659 are true, but because we do not know of any users for this
660 feature it seems better on balance to remove it. (The ovs-pki-cgi
661 program was not included in distribution packaging.)
662 - ovsdb-server now enforces the immutability of immutable columns. This
663 was not enforced in earlier versions due to an oversight.
664 - The following features are now deprecated. They will be removed no
665 earlier than February 2013. Please email dev@openvswitch.org with
667 - Bridge compatibility.
669 - The autopath action.
670 - Interface type "null".
671 - Numeric values for reserved ports (see "ovs-ofctl" note above).
672 - Tunnel Path MTU Discovery.
673 - CAPWAP tunnel support.
674 - The data in the RARP packets can now be matched in the same way as the
677 -- Open vSwitch team <dev@openvswitch.org> Tue, 26 Feb 2013 11:23:19 -0700
679 openvswitch (1.8.0-1) unstable; urgency=low
680 [ Open vSwitch team ]
681 * New upstream version
682 *** Internal only release ***
683 - New FAQ. Please send updates and additions!
684 - Authors of controllers, please read the new section titled "Action
685 Reproduction" in DESIGN, which describes an Open vSwitch change in
686 behavior in corner cases that may affect some controllers.
688 - A new test utility that can create L3 tunnel between two Open
689 vSwitches and detect connectivity issues.
691 - New --sort and --rsort options for "dump-flows" command.
692 - "mod-port" command can now control all OpenFlow config flags.
694 - Allow general bitwise masking for IPv4 and IPv6 addresses in
695 IPv4, IPv6, and ARP packets. (Previously, only CIDR masks
697 - Allow support for arbitrary Ethernet masks. (Previously, only
698 the multicast bit in the destination address could be individually
700 - New field OXM_OF_METADATA, to align with OpenFlow 1.1.
701 - The OFPST_QUEUE request now reports an error if a specified port or
702 queue does not exist, or for requests for a specific queue on all
703 ports, if the specified queue does not exist on any port. (Previous
704 versions generally reported an empty set of results.)
705 - New "flow monitor" feature to allow controllers to be notified of
706 flow table changes as they happen.
707 - Additional protocols are not mirrored and dropped when forward-bpdu is
708 false. For a full list, see the ovs-vswitchd.conf.db man page.
709 - Open vSwitch now sends RARP packets in situations where it previously
710 sent a custom protocol, making it consistent with behavior of QEMU and
712 - All Open vSwitch programs and log files now show timestamps in UTC,
713 instead the local timezone, by default.
715 -- Open vSwitch team <dev@openvswitch.org> Mon, 16 Jul 2012 16:44:52 +0900
717 openvswitch (1.7.0-1) unstable; urgency=low
718 [ Open vSwitch team ]
719 * New upstream version
720 - kernel modules are renamed. openvswitch_mod.ko is now
721 openvswitch.ko and brcompat_mod.ko is now brcompat.ko.
722 - Increased the number of NXM registers to 8.
723 - Added ability to configure dscp setting for manager and controller
724 connections. By default, these connections have a DSCP value of
725 Internetwork Control (0xc0).
726 - Added the granular link health statistics, 'cfm_health', to an
729 - Added support to mask nd_target for ICMPv6 neighbor discovery flows.
730 - Added support for OpenFlow 1.3 port description (OFPMP_PORT_DESC)
733 - Added the "dump-ports-desc" command to retrieve port
734 information using the new port description multipart messages.
736 - Added support for spawning ovs-test server from the client.
737 - Now ovs-test is able to automatically create test bridges and ports.
738 - "ovs-dpctl dump-flows" now prints observed TCP flags in TCP flows.
739 - Tripled flow setup performance.
740 - The "coverage/log" command previously available through ovs-appctl
741 has been replaced by "coverage/show". The new command replies with
742 coverage counter values, instead of logging them.
744 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jul 2012 17:23:57 +0900
746 openvswitch (1.6.1-1) unstable; urgency=low
747 [ Open vSwitch team ]
748 * New upstream version
749 - Allow OFPP_CONTROLLER as the in_port for packet-out messages.
751 -- Open vSwitch team <dev@openvswitch.org> Mon, 25 Jun 2012 13:52:17 +0900
753 openvswitch (1.6.0-1) unstable; urgency=low
754 [ Open vSwitch team ]
755 * New upstream version
757 - LACP bonds no longer fall back to balance-slb when negotiations fail.
758 Instead they drop traffic.
759 - The default bond_mode changed from SLB to active-backup, to protect
760 unsuspecting users from the significant risks of SLB bonds (which are
761 documented in vswitchd/INTERNALS).
762 - Load balancing can be disabled by setting the bond-rebalance-interval
765 - Added support for bitwise matching on TCP and UDP ports.
766 See ovs-ofctl(8) for more information.
767 - NXM flow dumps now include times elapsed toward idle and hard
769 - Added an OpenFlow extension NXT_SET_ASYNC_CONFIG that allows
770 controllers more precise control over which OpenFlow messages they
771 receive asynchronously.
772 - New "fin_timeout" action.
773 - Added "fin_timeout" support to "learn" action.
774 - The default MAC learning timeout has been increased from 60 seconds
775 to 300 seconds. The MAC learning timeout is now configurable.
776 - When QoS settings for an interface do not configure a default queue
777 (queue 0), Open vSwitch now uses a default configuration for that
778 queue, instead of dropping all packets as in previous versions.
779 - Logging to console and file will have UTC timestamp as a default for all
780 the daemons. An example of the default format is 2012-01-27T16:35:17Z.
781 ovs-appctl can be used to change the default format as before.
782 - New support for limiting the number of flows in an OpenFlow flow
783 table, with configurable policy for evicting flows upon
784 overflow. See the Flow_Table table in ovs-vswitch.conf.db(5)
785 for more information.
786 - New "enable-async-messages" column in the Controller table. If set to
787 false, OpenFlow connections to the controller will initially have all
788 asynchronous messages disabled, overriding normal OpenFlow behavior.
789 - ofproto-provider interface:
790 - "struct rule" has a new member "used" that ofproto implementations
791 should maintain by updating with ofproto_rule_update_used().
793 - The new option --timestamp causes the "monitor" command to print
794 a timestamp with every update.
795 - CFM module CCM broadcasts can now be tagged with an 802.1p priority.
797 -- Open vSwitch team <dev@openvswitch.org> Fri, 24 Feb 2012 11:12:48 +0900
799 openvswitch (1.5.0-1) unstable; urgency=low
800 [ Open vSwitch team ]
801 * New upstream version
803 - Added support for querying, modifying, and deleting flows
804 based on flow cookie when using NXM.
805 - Added new NXM_PACKET_IN format.
807 - Added daemonization support to the monitor and snoop commands.
809 - The "find" command supports new set relational operators
810 {=}, {!=}, {<}, {>}, {<=}, and {>=}.
811 - ovsdb-tool now uses the typical database and schema installation
812 directories as defaults.
814 -- Open vSwitch team <dev@openvswitch.org> Fri, 01 June 2012 13:06:00 +0900
816 openvswitch (1.4.0+git20120426-1) unstable; urgency=low
818 * New upstream release fixing the following bugs:
819 o Broken log rotation.
820 o Use-after-free error when ports disappear.
821 o Minor memory leaks.
822 o Testsuite failures on big-endian architectures.
824 -- Ben Pfaff <pfaffben@debian.org> Thu, 26 Apr 2012 13:46:55 -0700
826 openvswitch (1.4.0+git20120321-1) unstable; urgency=low
828 * New upstream version including:
830 - ovs-vsctl: Allow "fake bridges" to be created for VLAN 0.
831 - vswitchd: Make the MAC entry aging time configurable.
832 - mac-learning: Increase MAC learning timeout to 300 seconds.
834 - netdev-linux: Fix use-after-free when netdev_dump_queues() deletes
836 - netlink-socket: Increase Netlink socket receive buffer size.
837 - ofproto: Fix code that keeps track of MTU.
838 - ovs-monitor-ipsec: Detect correctly IPSEC configuration changes
839 - bond: Incorrectly reported an error in appctl.
840 - socket-util: Unlink Unix domain sockets that bind but fail to connect.
841 - bridge: Remove unwanted ports at time of ofproto creation.
842 - dpif-linux: Make dpif_linux_port_query_by_name() query only one
844 - ofproto-dpif: Cleanup STP on ports when disabled on their bridge.
845 - configure: Try to extract kernel source directory from build Makefile.
846 - vswitchd: Always configure a default queue for QoS.
847 - ofproto-dpif: Don't output to in_port even if in_port is OFPP_LOCAL.
848 - sflow_agent: Use snprintf() in place of sprintf().
850 - Move PKI directory to FHS-compliant location. Closes: #661090.
851 Thanks to Andreas Beckmann <debian@abeckmann.de> for reporting
853 - Use a different way to avoid failing install without kernel module.
854 - Avoid unit test failure when doing "unofficial" builds.
855 - Bump standards-version to 3.9.3.
856 - Remove some useless files from the dkms package.
857 - Clean .pyc files in "clean" target.
858 - Remove po-debconf build dependency.
859 - Build-depend on python-all to pull in all Python versions.
860 - Add missing ${python:Depends} to openvswitch-test package.
861 - Improve long descriptions so as to better describe the packages.
862 - Bump debhelper compat level to 8 and make build-depends consistent.
863 - Fix exit status of openvswitch-switch init script "status" command.
864 - Use provided kernel source dir instead of host kernel version.
865 - Do not run "make" if "configure" fails during DKMS build.
866 - Look in /lib/modules instead of /usr/src for DKMS kernel sources.
867 - Fix dependencies for openvswitch-datapath-dkms package.
868 - Don't install Python modules for obsolete Python versions.
869 - Add dependency on ${misc:Depends} to openvswitch-test
870 o Documentation improvements:
871 - ovsdb-doc: Use minus sign in negative numbers in nroff output.
872 - ovsdb-doc: Convert '-' preceding a number as a minus sign, not a
874 - ovsdb-doc: Put NAME section into generated manpage.
875 - Fix typo in manpage.
876 - vswitchd: Document behavior of 802.1p priorities with VLAN splinters.
877 - netdev: Fix typo in error message.
878 - INSTALL.Linux: minor typo
880 * Many thanks to Thomas Goirand <zigo@debian.org> for contributing many
881 of the packaging fixes listed above.
883 * This version fixes most of the lintian errors described in bug
884 #663051, but a few remain, so this upload does not close that bug. I
885 believe that this upload should be suitable for downgrading that bug's
888 -- Ben Pfaff <pfaffben@debian.org> Wed, 21 Mar 2012 10:00:28 -0700
890 openvswitch (1.4.0-2+nmu1) unstable; urgency=low
892 * Non maintainer upload.
893 * Removes all patches in debian/patches, because they are patching stuff
894 inconditionally in debian/*, and this should be applied by default.
895 * Uses the correct ${kernel_source_dir} in debian/dkms.conf.in, so that
896 the kernel module builds as expected (Closes: #659685).
898 -- Thomas Goirand <zigo@debian.org> Thu, 08 Mar 2012 08:46:24 +0000
900 openvswitch (1.4.0-2) unstable; urgency=low
902 * Use explicit DKMS variable for kernel source directory
903 - 0001-debian-Fix-dependencies-for-openvswitch-datapath-dkm.patch
904 - 0002-debian-Look-in-lib-modules-instead-of-usr-src-for-DK.patch
905 - 0001-debian-Use-provided-kernel-source-dir.patch
906 - 0001-debian-Do-not-run-make-if-configure-fails-during-DKM.patch
908 * Don't install Python modules for obsolete Python versions
909 - 0001-debian-Don-t-install-Python-modules-for-obsolete-Pyt.patch
911 -- Simon Horman <horms@debian.org> Tue, 14 Feb 2012 11:43:13 +0900
913 openvswitch (1.4.0-1) unstable; urgency=low
914 [ Open vSwitch team ]
915 * New upstream version
916 - Compatible with Open vSwitch kernel module included in Linux 3.3.
917 - New "VLAN splinters" feature to work around buggy device drivers
918 in old Linux versions. (This feature is deprecated. When
919 broken device drivers are no longer in widespread use, we will
920 delete this feature.) See ovs-vswitchd.conf.db(5) for more
923 - Added ability to match on IPv6 flow label through NXM.
924 - Added ability to match on ECN bits in IPv4 and IPv6 through NXM.
925 - Added ability to match on TTL in IPv4 and IPv6 through NXM.
926 - Added ability to modify ECN bits in IPv4.
927 - Added ability to modify TTL in IPv4.
929 - Don't require the "normal" action to use mirrors. Traffic will
930 now be properly mirrored for any flows, regardless of their
932 - Track packet and byte statistics sent on mirrors.
934 - New "fdb/flush" command to flush bridge's MAC learning table.
936 - A new distributed testing tool that allows one to diagnose performance
937 and connectivity issues. This tool currently is not included in RH or
939 - RHEL packaging now supports integration with Red Hat network scripts.
940 - Debian: Depend on python (>= 2.7) | python-argparse instead of
941 python-argparse to avoid pulling in python2.6
944 -- Open vSwitch team <dev@openvswitch.org> Mon, 30 Jan 2012 23:36:00 +0000
946 openvswitch (1.3.0-1) unstable; urgency=low
947 [ Open vSwitch team ]
948 * New upstream version
950 - Added an OpenFlow extension which allows the "output" action to accept
952 - Added an OpenFlow extension for flexible learning.
953 - Bumped number of NXM registers from four to five.
955 - New "version" command to determine version of running daemon.
956 - If no argument is provided for "cfm/show", displays detailed
957 information about all interfaces with CFM enabled.
958 - If no argument is provided for "lacp/show", displays detailed
959 information about all ports with LACP enabled.
961 - The software switch now supports 255 OpenFlow tables, instead
962 of just one. By default, only table 0 is consulted, but the
963 new NXAST_RESUBMIT_TABLE action can look up in additional
964 tables. Tables 128 and above are reserved for use by the
965 switch itself; please use only tables 0 through 127.
966 - Add support for 802.1D spanning tree (STP).
967 - Fragment handling extensions:
968 - New OFPC_FRAG_NX_MATCH fragment handling mode, in which L4
969 fields are made available for matching in fragments with
971 - New NXM_NX_IP_FRAG match field for matching IP fragments (usable
972 via "ip_frag" in ovs-ofctl).
973 - New ovs-ofctl "get-frags" and "set-frags" commands to get and set
974 fragment handling policy.
975 - CAPWAP tunneling now supports an extension to transport a 64-key. By
976 default it remains compatible with the old version and other
977 standards-based implementations.
978 - Flow setups are now processed in a round-robin manner across ports
979 to prevent any single client from monopolizing the CPU and conducting
980 a denial of service attack.
981 - Added support for native VLAN tagging. A new "vlan_mode"
982 parameter can be set for "port". Possible values: "access",
983 "trunk", "native-tagged" and "native-untagged".
984 - test-openflowd has been removed. Please use ovs-vswitchd instead.
986 -- Open vSwitch team <dev@openvswitch.org> Mon, 09 Dec 2011 23:36:00 +0000
988 openvswitch (1.2.0-1) unstable; urgency=low
990 [ Open vSwitch team ]
991 * New upstream version
992 - New "ofproto" abstraction layer to ease porting to hardware
994 - Packaging for Red Hat Enterprise Linux 5.6 and 6.0.
995 - Datapath support for Linux kernels up to 3.0.
997 - New "bundle" and "bundle_load" action extensions.
999 - Implement table unique constraints.
1000 - Support cooperative locking between callers.
1002 - New "-s" option for "show" command prints packet and byte
1003 counters for each port.
1005 - New "--readd" option for "replace-flows".
1007 - New "show" command to print an overview of configuration.
1008 - New "comment" command to add remark that explains intentions.
1009 - ovs-brcompatd has been rewritten to fix long-standing bugs.
1010 - ovs-openflowd has been renamed test-openflowd and moved into the
1011 tests directory. Its presence confused too many users. Please
1012 use ovs-vswitchd instead.
1013 - New ovs-benchmark utility to test flow setup performance.
1014 - A new log level "off" has been added. Configuring a log facility
1015 "off" prevents any messages from being logged to it. Previously,
1016 "emer" was effectively "off" because no messages were ever logged at
1017 level "emer". Now, errors that cause a process to exit are logged
1019 - "configure" option --with-l26 has been renamed --with-linux, and
1020 --with-l26-source has been renamed --with-linux-source. The old
1021 names will be removed after the next release, so please update
1023 - The "-2.6" suffix has been dropped from the datapath/linux-2.6 and
1024 datapath/linux-2.6/compat-2.6 directories.
1026 - Dropped support for "tun_id_from_cookie" OpenFlow extension.
1027 Please use the extensible match extensions instead.
1028 - Removed the Maintenance_Point and Monitor tables in an effort
1029 to simplify 802.1ag configuration.
1030 - Performance and scalability improvements
1033 -- Open vSwitch team <dev@openvswitch.org> Wed, 03 Aug 2011 14:43:00 +0000
1035 openvswitch (1.1.1-1) unstable; urgency=low
1037 [ Open vSwitch team ]
1041 * docs: Suppress warning marcro DD not defined
1042 (upstream commit 58f870d0)
1043 * debian: Make openvswitch depend on Python
1044 (upstream commit aa41cb61)
1045 * debian: Don't begin openvswitch-pki description with article.
1046 (upstream commit bc6bb66)
1047 * Debian: Add ${misc:Depends} dependency to python-openvswitch
1048 * Debian: Update standards version from 3.9.1 to 3.9.2
1049 * Debian: ${source:Version} dependency on python openvswitch
1050 * Debian: ${source:Version} dependency for python openvswitch
1051 * Switch to dpkg-source 3.0 (quilt) format
1052 - For local non-debian/ patches (above)
1054 -- Simon Horman <horms@debian.org> Wed, 15 Jun 2011 10:46:15 +0900
1056 openvswitch (1.1.0-1) unstable; urgency=low
1058 [ Open vSwitch team ]
1059 * New upstream version
1060 - Ability to define policies over IPv6
1063 - Support for extensible match extensions to OpenFlow
1065 - Support for HFSC qdisc.
1066 - Queue used by in-band control can now be configured.
1068 - Kernel<->userspace interface has been reworked and should be
1069 close to a stable ABI now.
1070 - "Port group" concept has been dropped.
1071 - GRE over IPSEC tunnels
1073 - New active backup bonding mode.
1074 - New L4 hashing support when LACP is enabled.
1075 - Source MAC hash now includes VLAN field also.
1077 - Greatly improved handling of large flow tables
1079 - "show" command now prints full vport configuration.
1080 - "dump-groups" command removed since kernel support for
1081 port groups was dropped.
1083 - New commands for working with the new Managers table.
1084 - "list" command enhanced with new formatting options and --columns
1086 - "get" command now accepts new --id option.
1087 - New "find" command.
1089 - New "queue-stats" command for printing queue stats.
1090 - New commands "replace-flows" and "diff-flows".
1091 - Commands to add and remove flows can now read from files.
1092 - New --flow-format option to enable or disable NXM.
1093 - New --more option to increase OpenFlow message verbosity.
1094 - Removed "tun-cookie" command, which is no longer useful.
1095 - ovs-controller enhancements for testing various features.
1096 - New ovs-vlan-test command for testing for Linux kernel driver VLAN
1097 bugs. New ovs-vlan-bug-workaround command for enabling and
1098 disabling a workaround for these driver bugs.
1100 - "Resubmit" actions now update flow statistics.
1101 - New "register" extension for use in matching and actions, via NXM.
1102 - New "multipath" experimental action extension.
1103 - New support for matching multicast Ethernet frames, via NXM.
1104 - New extension for OpenFlow vendor error codes.
1105 - New extension to set the QoS output queue without actually
1106 sending to an output port.
1107 - Open vSwitch now reports a single flow table, instead of
1108 separate hash and wildcard tables. This better models the
1109 current implementation.
1110 - New experimental "note" action.
1111 - New "ofproto/trace" ovs-appctl command and associated utilities
1112 to ease debugging complex flow tables.
1114 - Schema documentation now includes an entity-relationship diagram.
1115 - The database is now garbage collected. In most tables,
1116 unreferenced rows will be deleted automatically.
1117 - Many tables now include statistics updated periodically by
1118 ovs-vswitchd or ovsdb-server.
1119 - Every table now has an "external-ids" column for use by OVS
1121 - There is no default controller anymore. Each bridge must have its
1122 controller individually specified.
1123 - The "fail-mode" is now a property of a Bridge instead of a Controller.
1124 - New versioning and checksum features.
1125 - New Managers table and manager_options column in Open_vSwitch table
1126 for specifying managers. The old "managers" column in the
1127 Open_vSwitch table has been removed.
1128 - Many "name" columns are now immutable.
1130 - Dropped support for XenServer pre-5.6.100.
1131 - Dropped support for Linux pre-2.6.18.
1132 - Dropped controller discovery support.
1133 - Dropped "ovs-ofctl status" and the OpenFlow extension that it used.
1134 Statistics reporting in the database is a rough equivalent.
1135 - Dropped the "corekeeper" package (now separate, at
1136 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper).
1137 - Performance and scalability improvements
1141 * Add the following fixes from upstream branch-1.1
1142 - 7f1aca9 dpif-linux: Avoid logging error on ENOENT in
1143 dpif_linux_is_internal_device().
1144 - 8996f83 dpif-linux: Avoid segfault on netdev_get_stats() without kernel
1146 - 002d4a3 vswitch: Improve schema documentation.
1147 - 58bd294 cfm: Fix broken fault logic.
1148 - c042664 bridge: Run once before configuring CFM.
1149 * Switch to dpkg-source 3.0 (quilt) format
1151 -- Simon Horman <horms@debian.org> Wed, 27 Apr 2011 17:11:10 +0900
1153 openvswitch (1.1.0~pre2.g2.ea763e0e-1) unstable; urgency=low
1155 * Git snapshot, including
1156 - tests: Fix Y2011 bug in testsuite
1159 -- Simon Horman <horms@debian.org> Wed, 12 Jan 2011 08:34:35 +0900
1161 openvswitch (1.1.0~pre2.g1.bbe8d06e-1) unstable; urgency=low
1165 -- Simon Horman <horms@debian.org> Thu, 06 Jan 2011 11:11:55 +0900
1167 openvswitch (1.1.0~pre2-5) unstable; urgency=low
1169 * Open vSwitch only works on Linux so set
1170 the Architecture of binary packages to linux-any accordingly
1172 -- Simon Horman <horms@debian.org> Tue, 23 Nov 2010 07:55:19 +0900
1174 openvswitch (1.1.0~pre2-4) unstable; urgency=low
1176 * Add procps to Build-Depends
1179 -- Simon Horman <horms@debian.org> Tue, 16 Nov 2010 06:46:17 +0900
1181 openvswitch (1.1.0~pre2-3) unstable; urgency=low
1183 * Remove the corekeeper package as it isn't strongly related
1184 to Open vSwitch. It has subsequently been broken off into
1185 a separate source repository and may be uploaded as its
1186 own debian source package.
1187 http://openvswitch.org/cgi-bin/gitweb.cgi?p=corekeeper;a=summary
1189 * Avoid the use of long socket names.
1190 (closes: #602891, closes: #602911)
1192 -- Simon Horman <horms@debian.org> Thu, 11 Nov 2010 06:35:05 +0900
1194 openvswitch (1.1.0~pre2-2) unstable; urgency=low
1196 * Clarify licensing of files in xenserver/
1198 -- Simon Horman <horms@debian.org> Thu, 23 Sep 2010 10:56:18 +0900
1200 openvswitch (1.1.0~pre2-1) unstable; urgency=low
1202 * New upstream version
1205 -- Simon Horman <horms@debian.org> Wed, 15 Sep 2010 18:28:59 +0900
1207 openvswitch (1.1.0~pre1-1) unstable; urgency=low
1209 * New upstream version
1210 - OpenFlow 1.0 slicing (QoS) functionality
1211 - Python bindings for configuration database (no write support)
1212 - Performance and scalability improvements
1215 -- Open vSwitch team <dev@openvswitch.org> Tue, 31 Aug 2010 23:20:00 +0000
1217 openvswitch (1.0.1-1) unstable; urgency=low
1219 * New upstream version.
1221 -- Open vSwitch team <dev@openvswitch.org> Mon, 17 May 2010 10:36:00 +0000
projects / ovs.git / blob