debian/changelog

   1 proxmox-installer (7.4-2) bullseye; urgency=medium
   2
   3   * d/control: depend on renamed and split-out proxmox-kernel-helper
   4
   5  -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Mar 2023 21:15:56 +0100
   6
   7 proxmox-installer (7.4-1) bullseye; urgency=medium
   8
   9   * zfs: fix wrong command reference in error message
  10
  11   * parition boot disk: use 1 GiB for ESP if root disk has 100+ GB space
  12
  13   * fix #4430: allow users to select the UTC timezone
  14
  15  -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Mar 2023 12:40:57 +0100
  16
  17 proxmox-installer (7.3-1) bullseye; urgency=medium
  18
  19   * lvm create: improve rounding of target root LV size by aligning it down to
  20     the 4MB boundary to ensure that LVM doesn't try to over allocates by one
  21     extent.
  22
  23   * align computed swap size down to 4 MB to avoid oddly specific sizes and
  24     issues with LVM rounding PEs up on creation
  25
  26   * lvm create: leave 4 MB space unallocated space for small disks (<= 32GB)
  27     too
  28
  29  -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Nov 2022 07:24:09 +0100
  30
  31 proxmox-installer (7.2-3) bullseye; urgency=medium
  32
  33   * create lvm: improve rounding/alignment
  34
  35  -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Nov 2022 16:51:40 +0100
  36
  37 proxmox-installer (7.2-1) bullseye; urgency=medium
  38
  39   * zfs compression - fix wrongly added zle option
  40
  41   * fix #4236: split disk space check into soft and hard limits, warn
  42     below 8 GB but only hard fail on 2 GB - which can never work
  43
  44   * fine tune swap selection for low memory/space setups
  45
  46   * lvm create: rework auto-space distribution and improve for low size
  47     setups. Avoid a per-default extra free space block if the disk has
  48     less than 32 GB of total space. Use the full rest size for root if
  49     it's below 12 GB, not much of a point in setting up a data thin LVM
  50     for guests then. Then also show a display message if no thin LVM is
  51     created to inform the admin.
  52
  53  -- Proxmox Support Team <support@proxmox.com>  Fri, 18 Nov 2022 10:44:33 +0100
  54
  55 proxmox-installer (7.1-2) bullseye; urgency=medium
  56
  57   * disks: raid: avoid restting hdsize when reopening options
  58
  59   * drop trying to enable timesyncd, wrong since chrony switch & unnecessary
  60     anyway
  61
  62   * remove /mnt/hostrun after install to avoid lingering directory
  63
  64  -- Proxmox Support Team <support@proxmox.com>  Thu, 28 Apr 2022 08:08:47 +0200
  65
  66 proxmox-installer (7.1-1) bullseye; urgency=medium
  67
  68   * init:
  69     + add missing newline for chorny log message
  70     + add hint that GUI should start and where to find potential errors
  71     + do not sync on actual reboot, was already done after installation
  72       finished
  73
  74   * proxmox-boot-preparation: add newline to /etc/kernel/cmdline
  75
  76   * display disk size with 2 decimal places
  77
  78   * zfs create: default to relatime
  79
  80   * fix #3905: allow lze/gzip/zstd compression for ZFS
  81
  82   * zfs: allow RAID0 with different-sized disks
  83
  84   * fix #3188: update hdsize spin-button on disk-selection change
  85
  86   * fix #3587: make hdsize configurable for btrfs setups
  87
  88  -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Apr 2022 14:17:52 +0200
  89
  90 proxmox-installer (7.0-7) bullseye; urgency=medium
  91
  92   * Revert "bridged network: set bridge HW-address to port one", to subtle to
  93     do as static configuration
  94
  95   * avoid copying packages into ram, bind-mount into target chroot and extract
  96     directly
  97
  98   * unconfigured: avoid doing the reset "sysrq" if possible, prefer a normal
  99     reboot system call.
 100
 101  -- Proxmox Support Team <support@proxmox.com>  Wed, 14 Jul 2021 12:16:27 +0200
 102
 103 proxmox-installer (7.0-6) bullseye; urgency=medium
 104
 105   * bridged network: set bridge HW-address (MAC) to the one of the physical
 106     port
 107
 108   * unconfigured: ifupdown is not used anymore, cope with that
 109
 110   * unconfigured: do not unmount /dev to early on shutdown
 111
 112   * unconfigured: only log about swap if there's actually one we can deactivate
 113
 114  -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Jul 2021 13:21:09 +0200
 115
 116 proxmox-installer (7.0-4) bullseye; urgency=medium
 117
 118   * clean disk: sort blockdevs by length to clean depth-first
 119
 120   * lvcreate: pass --yes to ensure wipesignatures is answered with go-
 121     for-it
 122
 123   * try to make LVM less noisy regarding leaked file-descriptors
 124
 125   * network: sync bridge option names with pve-common
 126
 127  -- Proxmox Support Team <support@proxmox.com>  Thu, 24 Jun 2021 11:04:45 +0200
 128
 129 proxmox-installer (7.0-3) bullseye; urgency=medium
 130
 131   * pid1: shutdown: send a more friendly TERM signal first
 132
 133   * Proxmox VE: enable BTRFS support on installation as technology preview
 134
 135  -- Proxmox Support Team <support@proxmox.com>  Wed, 23 Jun 2021 23:03:22 +0200
 136
 137 proxmox-installer (7.0-2) bullseye; urgency=medium
 138
 139   * lvm: always tell lvm to wipe the signatures
 140
 141   * clean disk: pass all partitions separately to wipe2fs, as else it won't
 142     bother cleaning up child ones
 143
 144   * disk preparation: make progress report for cleaning up disks slightly more
 145     granular
 146
 147   * unconfigured: handle being the new PID 1
 148
 149   * unconfigured: heuristically detect high-dpi and adapt debugshell font and
 150     GDK_SCALE for the wizard in that case
 151
 152  -- Proxmox Support Team <support@proxmox.com>  Tue, 15 Jun 2021 15:07:04 +0200
 153
 154 proxmox-installer (7.0-1) bullseye; urgency=medium
 155
 156   * unify installer packages into single binary-package
 157
 158   * use wipefs to really clean the disks used for the root filesystem, as with
 159     wiping only the partions through sgdik, things like LVS refuse to operate
 160     if they find traces of existing LVs.
 161
 162   * override grub default config via installer instead of separate grub
 163     package
 164
 165   * re-build for Debian 11 Bullseye based releases
 166
 167  -- Proxmox Support Team <support@proxmox.com>  Tue, 25 May 2021 19:54:34 +0200
 168
 169 pve-installer (6.4-2) pmg pve; urgency=medium
 170
 171   * zfs: assume that all devices are boot devices as firmware is weird and
 172     sometimes allows booting only from certain devices, which we cannot know
 173     here, and potentially only the boot partition could be corrupted/broken/...
 174     in which case another dev in the raid 0 could allow successful booting
 175
 176   * legacy BIOS: boot ZFS indirectly using proxmox-boot-tool and the vfat based
 177     ESP as the primary boot partition to avoid issues with the ZFS
 178     implementation of GRUB.
 179
 180  -- Proxmox Support Team <support@proxmox.com>  Mon, 26 Apr 2021 18:53:55 +0200
 181
 182 pve-installer (6.4-1) pmg pve; urgency=medium
 183
 184   * fix #2518: disk selector: add "deselect all" button if there are
 185     more than three disks
 186
 187   * avoid triggering keyboard layout auto-selection heuristic if it was
 188     changed explicitly
 189
 190   * partially fix #2804: set debug-console keymap on language selection
 191
 192   * fix #3223: fix hardcoded port value in success page html
 193
 194   * fix #3165: start chrony after DHCP client for an opportunistic time-sync
 195
 196  -- Proxmox Support Team <support@proxmox.com>  Fri, 26 Mar 2021 19:47:08 +0100
 197
 198 pve-installer (6.3-2) pmg pve; urgency=medium
 199
 200   * minor spelling/grammar fixes all over the place
 201
 202   * do not configure VT keyboard layout during installation, may hang the
 203     installer
 204
 205  -- Proxmox Support Team <support@proxmox.com>  Tue, 10 Nov 2020 15:03:14 +0100
 206
 207 pve-installer (6.3-1) pmg pve; urgency=medium
 208
 209   * fix #2925: edit /etc/kernel/cmdline unconditionally
 210
 211   * set console keymap on language selection
 212
 213   * fix #3057: remove ext3 option from installer
 214
 215   * pbs: actually write out email to user.cfg
 216
 217   * network: replace dot notation netmask with CIDR notation as primary input
 218
 219   * fix #3093: allow one to automatically reboot on installation success
 220
 221  -- Proxmox Support Team <support@proxmox.com>  Sun, 08 Nov 2020 19:35:45 +0100
 222
 223 pve-installer (6.2-3) pmg pve; urgency=medium
 224
 225   * fix #2804: add a root shell on tty3
 226
 227   * pbs: update installation html texts
 228
 229  -- Proxmox Support Team <support@proxmox.com>  Tue, 07 Jul 2020 15:37:04 +0200
 230
 231 pve-installer (6.2-2) pmg pve; urgency=medium
 232
 233   * write out network configuration in CIDR notation
 234
 235   * create default DS
 236
 237  -- Proxmox Support Team <support@proxmox.com>  Mon, 25 May 2020 21:10:33 +0200
 238
 239 pve-installer (6.2-1) pmg pve; urgency=medium
 240
 241   * unconfigured: don't trap "bad" debug-shell exits
 242
 243  -- Proxmox Support Team <support@proxmox.com>  Sun, 10 May 2020 21:21:10 +0200
 244
 245 pve-installer (6.1-4) pmg pve; urgency=medium
 246
 247   * unconfigured: allow pseudo terminals, mount devpts
 248
 249   * start installer window always in full screen mode
 250
 251   * improve spice integration
 252
 253  -- Proxmox Support Team <support@proxmox.com>  Fri, 24 Apr 2020 19:40:23 +0200
 254
 255 pve-installer (6.1-3) pmg pve; urgency=medium
 256
 257   * fix behavior if ZFS disks have no /dev/by-id path
 258
 259   * restrict admin email to same format as the JSONSchema
 260
 261  -- Proxmox Support Team <support@proxmox.com>  Fri, 06 Mar 2020 10:57:49 +0100
 262
 263 pve-installer (6.1-2) pmg pve; urgency=medium
 264
 265   * add all ZFS vdevs with stable by-id device path
 266
 267   * fix #1211: allow installation on 4k-native (4kn) disks booting with UEFI
 268
 269  -- Proxmox Support Team <support@proxmox.com>  Wed, 27 Nov 2019 19:20:45 +0100
 270
 271 pve-installer (6.1-1) pmg pve; urgency=medium
 272
 273   * raise postifx main.cf compatibility_level to 2
 274
 275   * ensure /etc/aliases.db is generated
 276
 277  -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Nov 2019 10:35:42 +0100
 278
 279 pve-installer (6.0-9) pmg pve; urgency=medium
 280
 281   * fix #2313: load country.dat file with utf8 encoding
 282
 283  -- Proxmox Support Team <support@proxmox.com>  Sat, 17 Aug 2019 10:31:38 +0200
 284
 285 pve-installer (6.0-8) pmg pve; urgency=medium
 286
 287   * success screen: show real final IP addr with port
 288
 289   * handle bootloader installation errors gracefully
 290
 291   * efiboot: remove redundant call to zz-pve-efiboot
 292
 293  -- Proxmox Support Team <support@proxmox.com>  Thu, 25 Jul 2019 12:40:37 +0200
 294
 295 pve-installer (6.0-5) pmg pve; urgency=medium
 296
 297   * hd_list: skip all devices with iso9660 as FS
 298
 299   * mount efivarfs to ensure we can read bigger EFI NVRAM backed variables
 300
 301   * fix #1603: create a new and unique machine-id
 302
 303   * copy /etc/hostid from installer root to target
 304
 305   * prompt user if a vgrename is OK for exisiting 'pve'/'pmg' VGs
 306
 307   * use pve-efiboot-tool for systemd boot ESP preparation
 308
 309  -- Proxmox Support Team <support@proxmox.com>  Thu, 11 Jul 2019 19:22:31 +0200
 310
 311 pve-installer (6.0-4) pmg pve; urgency=medium
 312
 313   * update systemd-boot config after initializing esps
 314
 315   * clear zpool labels on selected disks' partitions
 316
 317   * use by-id diskpath for zpool create
 318
 319   * warn if host memory is less than 1 GB
 320
 321  -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Jul 2019 18:10:06 +0200
 322
 323 pve-installer (6.0-3) pmg pve; urgency=medium
 324
 325   * add support for ZFS on EFI
 326
 327  -- Proxmox Support Team <support@proxmox.com>  Fri, 28 Jun 2019 14:03:21 +0200
 328
 329 pve-installer (6.0-2) pmg pve; urgency=medium
 330
 331   * add note regarding issues with ZFS on HW raid controller
 332
 333  -- Proxmox Support Team <support@proxmox.com>  Tue, 25 Jun 2019 10:27:54 +0200
 334
 335 pve-installer (6.0-1) pmg pve; urgency=medium
 336
 337   * bump for Debian Buster
 338
 339  -- Proxmox Support Team <support@proxmox.com>  Wed, 22 May 2019 10:02:08 +0200
 340
 341 pve-installer (5.0-26) unstable; urgency=medium
 342
 343   * ipconf view: only (re)set fields if nic really changed
 344
 345  -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Mar 2019 14:39:35 +0100
 346
 347 pve-installer (5.0-25) unstable; urgency=medium
 348
 349   * add support for Citrix Hypervisor blockdev
 350
 351   * Fix #2009: Recreate hdsize_adj with new hdsize
 352
 353   * implement previous button
 354
 355   * implement summary/acknowledgement screen
 356
 357  -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Mar 2019 16:36:13 +0100
 358
 359 pve-installer (5.0-24) unstable; urgency=medium
 360
 361   * change last button to 'Install'
 362
 363   * Reset adjustment for spinbutton_hdsize
 364
 365  -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Nov 2018 16:09:14 +0100
 366
 367 pve-installer (5.0-23) unstable; urgency=medium
 368
 369   * do not create a swap zvol
 370
 371   * unify and adapt disk partitioning
 372
 373   * fix #1527: Use 'iso-codes' package country naming
 374
 375   * allow more than 26 SCSI disk devices.
 376
 377   * fix various grammar and spelling errors
 378
 379  -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Nov 2018 09:49:44 +0100
 380
 381 pve-installer (5.0-22) unstable; urgency=medium
 382
 383   * fix #1241: ensure at least 1G of thinpool metadata
 384
 385   * handle swapsize=0 correctly
 386
 387   * handle maxvz=0 correctly
 388
 389   * handle minfree=0 correctly
 390
 391   * handle local-only LVM setup
 392
 393  -- Proxmox Support Team <support@proxmox.com>  Fri, 11 May 2018 13:17:42 +0200
 394
 395 pve-installer (5.0-21) unstable; urgency=medium
 396
 397   * ipconf.htm: remove pve product name
 398
 399  -- Proxmox Support Team <support@proxmox.com>  Mon, 22 Jan 2018 07:57:26 +0100
 400
 401 pve-installer (5.0-20) unstable; urgency=medium
 402
 403   * proxinstall: only display option maxroot for product pve
 404
 405  -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Dec 2017 07:43:41 +0100
 406
 407 pve-installer (5.0-19) unstable; urgency=medium
 408
 409   * allow all valid netmasks
 410
 411   * html-pmg/extract1-license.htm: fix typo
 412
 413  -- Proxmox Support Team <support@proxmox.com>  Thu, 14 Dec 2017 11:19:10 +0100
 414
 415 pve-installer (5.0-18) unstable; urgency=medium
 416
 417   * proxinstall - only creat ezfs data pool for product pve
 418
 419  -- Proxmox Support Team <support@proxmox.com>  Thu, 23 Nov 2017 09:53:18 +0100
 420
 421 pve-installer (5.0-17) unstable; urgency=medium
 422
 423   * include svg files for installer banner
 424
 425  -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Nov 2017 13:12:25 +0100
 426
 427 pve-installer (5.0-16) unstable; urgency=medium
 428
 429   * pmg: fix lvm volume sizes
 430
 431  -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Nov 2017 10:26:38 +0100
 432
 433 pve-installer (5.0-15) unstable; urgency=medium
 434
 435   * dispaly info pages for 15 seconds
 436
 437   * Revert "change clamav daily database name to daily.cld"
 438
 439  -- Proxmox Support Team <support@proxmox.com>  Wed, 22 Nov 2017 09:29:16 +0100
 440
 441 pve-installer (5.0-14) unstable; urgency=medium
 442
 443   * correctly set PermitRootLogin in sshd_config
 444
 445  -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Nov 2017 14:15:16 +0100
 446
 447 pve-installer (5.0-13) unstable; urgency=medium
 448
 449   * change clamav daily database name to daily.cld
 450
 451  -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Nov 2017 12:31:13 +0100
 452
 453 pve-installer (5.0-12) unstable; urgency=medium
 454
 455   * pmg: write admin email to /etc/pmg/pmg.conf
 456
 457  -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Nov 2017 10:26:59 +0100
 458
 459 pve-installer (5.0-11) unstable; urgency=medium
 460
 461   * pmg: write user.conf to correct location
 462
 463  -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Nov 2017 09:56:40 +0100
 464
 465 pve-installer (5.0-10) unstable; urgency=medium
 466
 467   * bump version for testing
 468
 469   * implement proxmox mail gateway installation
 470
 471  -- Proxmox Support Team <support@proxmox.com>  Tue, 21 Nov 2017 08:05:02 +0100
 472
 473 pve-installer (5.0-8) unstable; urgency=medium
 474
 475   * add support for multiple products (pve, pmg)
 476
 477  -- Proxmox Support Team <support@proxmox.com>  Mon, 20 Nov 2017 12:47:44 +0100
 478
 479 pve-installer (5.0-7) unstable; urgency=medium
 480
 481   * kill dhclient before rebooting
 482
 483   * ZFS: explicitly export rpool after installation
 484
 485   * fix #1479: detect missing KVM support
 486
 487  -- Proxmox Support Team <support@proxmox.com>  Thu, 19 Oct 2017 10:56:30 +0200
 488
 489 pve-installer (5.0-6) unstable; urgency=medium
 490
 491   * fix console-setup
 492
 493  -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Aug 2017 13:58:22 +0200
 494
 495 pve-installer (5.0-5) unstable; urgency=medium
 496
 497   * allow installing without active network devices
 498
 499   * fix bug in handling of invalid GeoIP results
 500
 501  -- Proxmox Support Team <support@proxmox.com>  Wed, 9 Aug 2017 09:41:36 +0200
 502
 503 pve-installer (5.0-4) unstable; urgency=medium
 504
 505   * rework password and email text
 506
 507  -- Proxmox Support Team <support@proxmox.com>  Fri, 23 Jun 2017 09:49:38 +0200
 508
 509 pve-installer (5.0-3) unstable; urgency=medium
 510
 511   * let raid dialogue grow if > 4 disks
 512
 513   * add initial check for NICs
 514
 515   * ignore link-local addresses
 516
 517   * clean disks prior to formatting
 518
 519   * explicitly mount ESP as vfat
 520
 521   * zero start of partitions after formatting disk
 522
 523   * fix XFS mount options
 524
 525  -- Proxmox Support Team <support@proxmox.com>  Fri, 5 May 2017 12:11:22 +0200
 526
 527 pve-installer (5.0-2) unstable; urgency=medium
 528
 529   * always select a NIC, even if DHCP fails
 530
 531  -- Proxmox Support Team <support@proxmox.com>  Tue, 14 Mar 2017 09:44:30 +0100
 532
 533 pve-installer (5.0-1) unstable; urgency=medium
 534
 535   * rebuild for PVE 5.0
 536
 537   * fix #1239: enhance swap on ZFS setup
 538
 539   * use iproute2, support interface selection
 540
 541   * get DHCP leases on all interfaces
 542
 543   * only require grub-efi to succeed if booted using UEFI
 544
 545  -- Proxmox Support Team <support@proxmox.com>  Mon, 13 Mar 2017 13:03:43 +0100
 546
 547 pve-installer (4.0-16) unstable; urgency=medium
 548
 549   * actually use more than 8 disks if selected
 550
 551  -- Proxmox Support Team <support@proxmox.com>  Thu, 15 Dec 2016 10:05:54 +0100
 552
 553 pve-installer (4.0-15) unstable; urgency=medium
 554
 555   * use explicit partition starts
 556
 557   * bump EFI partition size to 256M
 558
 559   * compute_swapsize: add return statement
 560
 561  -- Proxmox Support Team <support@proxmox.com>  Tue, 13 Dec 2016 09:12:20 +0100
 562
 563 pve-installer (4.0-14) unstable; urgency=medium
 564
 565   * bump version for new RELEASE=4.4
 566
 567  -- Proxmox Support Team <support@proxmox.com>  Fri, 09 Dec 2016 12:03:00 +0100
 568
 569 pve-installer (4.0-13) unstable; urgency=medium
 570
 571   * add default invalid mail address
 572
 573   * refactor disk setup
 574
 575   * add advanced ZFS options
 576
 577   * fix #1190: allow ZFS mirrors with slightly different sizes
 578
 579  -- Proxmox Support Team <support@proxmox.com>  Mon, 05 Dec 2016 10:48:19 +0100
 580
 581 pve-installer (4.0-12) unstable; urgency=medium
 582
 583   * fix update_progress while extracting files
 584
 585   * assume root file system is writable (overlayfs)
 586
 587  -- Proxmox Support Team <support@proxmox.com>  Wed, 21 Sep 2016 13:12:33 +0200
 588
 589 pve-installer (4.0-11) unstable; urgency=medium
 590
 591   * use unsquashfs instead of tar
 592
 593  -- Proxmox Support Team <support@proxmox.com>  Wed, 31 Aug 2016 08:49:30 +0200
 594
 595 pve-installer (4.0-10) unstable; urgency=medium
 596
 597   * Fix #1054: error on purely numeric hostnames
 598
 599   * update layout, use new logo
 600
 601  -- Proxmox Support Team <support@proxmox.com>  Tue, 09 Aug 2016 09:46:31 +0200
 602
 603 pve-installer (4.0-8) unstable; urgency=medium
 604
 605   * restrict hdsize if requested
 606
 607  -- Proxmox Support Team <support@proxmox.com>  Sun, 06 Mar 2016 09:04:44 +0100
 608
 609 pve-installer (4.0-7) unstable; urgency=medium
 610
 611   * use lvmthin for data volume
 612
 613   * create zfs subpool (rpool/data) as VM/CT storage
 614
 615   * create better default storage configiguration
 616
 617  -- Proxmox Support Team <support@proxmox.com>  Tue, 01 Mar 2016 07:16:16 +0100
 618
 619 pve-installer (4.0-6) unstable; urgency=medium
 620
 621   * install EFI fallback boot file (OVMF does not boot without)
 622
 623  -- Proxmox Support Team <support@proxmox.com>  Thu, 10 Dec 2015 10:39:46 +0100
 624
 625 pve-installer (4.0-5) unstable; urgency=medium
 626
 627   * allow up to 8 zfs disks
 628
 629   * enable systemd-timesyncd.service by default
 630
 631  -- Proxmox Support Team <support@proxmox.com>  Fri, 20 Nov 2015 09:07:20 +0100
 632
 633 pve-installer (4.0-4) unstable; urgency=medium
 634
 635   * add ipv6 support
 636
 637  -- Proxmox Support Team <support@proxmox.com>  Tue, 06 Oct 2015 08:22:45 +0200
 638
 639 pve-installer (4.0-3) unstable; urgency=medium
 640
 641   * zpool create: use cachefile=none
 642
 643   * do not mention LVM snapshots
 644
 645  -- Proxmox Support Team <support@proxmox.com>  Tue, 29 Sep 2015 12:17:57 +0200
 646
 647 pve-installer (4.0-2) unstable; urgency=medium
 648
 649   * add xfs support
 650
 651  -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Jun 2015 11:57:06 +0200
 652
 653 pve-installer (4.0-1) unstable; urgency=medium
 654
 655   * updates for debian jessie
 656
 657  -- Proxmox Support Team <support@proxmox.com>  Tue, 16 Jun 2015 11:56:54 +0200
 658
 659 pve-installer (3.3-3) unstable; urgency=low
 660
 661   * support ZFS
 662
 663  -- Proxmox Support Team <support@proxmox.com>  Wed, 14 Jan 2015 09:39:28 +0100
 664
 665 pve-installer (3.3-2) unstable; urgency=low
 666
 667   * support UEFI systems
 668
 669   * add new 'Options' Dialog
 670
 671   * do not install xorg.conf (not needed, and makes problems with EFI boot)
 672
 673  -- Proxmox Support Team <support@proxmox.com>  Wed, 01 Oct 2014 09:16:03 +0200
 674
 675 pve-installer (3.3-1) unstable; urgency=low
 676
 677   * update path for 3.3 release
 678
 679  -- Proxmox Support Team <support@proxmox.com>  Mon, 08 Sep 2014 12:08:14 +0200
 680
 681 pve-installer (3.0-2) unstable; urgency=low
 682
 683   * always use GUID partition tables
 684
 685  -- Proxmox Support Team <support@proxmox.com>  Thu, 09 Jan 2014 16:00:25 +0100
 686
 687 pve-installer (3.0-1) unstable; urgency=low
 688
 689   * updates for debian wheezy
 690
 691   * use webkit instead of gthhtml2
 692
 693  -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Mar 2013 06:39:42 +0100
 694
 695 pve-installer (2.3-6) unstable; urgency=low
 696
 697   * fix hdsize algorythm
 698
 699  -- Proxmox Support Team <support@proxmox.com>  Fri, 01 Mar 2013 10:32:00 +0100
 700
 701 pve-installer (2.0-5) unstable; urgency=low
 702
 703   * add 'hdsize' boot parameter to specify maximum size used.
 704
 705  -- Proxmox Support Team <support@proxmox.com>  Fri, 30 Nov 2012 06:18:55 +0100
 706
 707 pve-installer (2.0-4) unstable; urgency=low
 708
 709   * fix bug #226 && #227: new minfree and maxvz boot options
 710
 711  -- Proxmox Support Team <support@proxmox.com>  Wed, 18 Jul 2012 05:51:47 +0200
 712
 713 pve-installer (2.0-3) unstable; urgency=low
 714
 715   * increase free space on LVM up to 16GB
 716
 717  -- Proxmox Support Team <support@proxmox.com>  Thu, 16 Feb 2012 11:59:55 +0100
 718
 719 pve-installer (2.0-2) unstable; urgency=low
 720
 721   * support new kernel parameter 'ext4' switch (use ext4 instead of ext3)
 722
 723   * use 'ext3' by default
 724
 725  -- Proxmox Support Team <support@proxmox.com>  Thu, 04 Aug 2011 12:58:27 +0200
 726
 727 pve-installer (2.0-1) unstable; urgency=low
 728
 729   * use ext4 fs
 730
 731   * align LVM on 128k boundary
 732
 733   * use 'parted' to create partitions
 734
 735   * support > 2TB disks (use GPT partition tables)
 736
 737   * mount with barrier=0 during install (speedup)
 738
 739   * write keyboard settings to /etc/pve-installer.cfg
 740
 741   * adjust for pve2
 742
 743   * avoid to run update-grub or update-initramfs during install
 744
 745   * use --no-triggers for faster unpack
 746
 747   * also mount sysfs to /target/sys
 748
 749   * do not write /etc/default/grub - not really needed
 750
 751   * we now use openbox instead of metacity
 752
 753   * wait one second after partitioning (give kernel time to reread part
 754     table)
 755
 756   * use update-initramfs -c (instead of -u)
 757
 758   * do not write /etc/apache2/ports.conf (not really needed)
 759
 760   * enable apache port redirect (a2ensite pve-redirect.conf)
 761
 762  -- Proxmox Support Team <support@proxmox.com>  Mon, 15 Feb 2010 14:09:46 +0100
 763
 764 pve-installer (1.0-9) unstable; urgency=low
 765
 766   * fix netmask bug
 767
 768   * use 'udevadm info' to detect disks
 769
 770  -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Jan 2010 13:13:11 +0100
 771
 772 pve-installer (1.0-8) unstable; urgency=low
 773
 774   * use UUID= for /boot in fstab
 775
 776  -- Proxmox Support Team <support@proxmox.com>  Fri, 22 Jan 2010 13:11:58 +0100
 777
 778 pve-installer (1.0-7) unstable; urgency=low
 779
 780   * unconfigured.sh: use -q flag for modprobe
 781
 782   * proxinstall: use 'removable' flag on older kernels (instead
 783     of 'capability') to detect cdroms.
 784
 785  -- Proxmox Support Team <support@proxmox.com>  Fri, 04 Dec 2009 18:03:59 +0100
 786
 787 pve-installer (1.0-6) unstable; urgency=low
 788
 789   * pass --no-floppy to grub-install (some users reported delays)
 790
 791  -- Proxmox Support Team <support@proxmox.com>  Fri, 19 Jun 2009 10:48:37 +0200
 792
 793 pve-installer (1.0-5) unstable; urgency=low
 794
 795   * fixes for debian lenny
 796
 797   * support dynamically allocated virtio blk devices
 798
 799  -- Proxmox Support Team <support@proxmox.com>  Fri, 08 May 2009 16:53:42 +0200
 800
 801 pve-installer (1.0-4) unstable; urgency=low
 802
 803   * proxinstall: better postfix configuration
 804
 805  -- Proxmox Support Team <support@proxmox.com>  Mon, 12 Jan 2009 12:21:13 +0100
 806
 807 pve-installer (1.0-3) unstable; urgency=low
 808
 809   * ause grub instead of lilo
 810
 811  -- Proxmox Support Team <support@proxmox.com>  Wed, 20 Aug 2008 14:39:57 +0200
 812
 813 pve-installer (1.0-2) stable; urgency=low
 814
 815   * proxinstall (extract_data): added maxroot and swapsize boot parameters,
 816     set bridge parameters (stp = on, fd = 0)
 817
 818  -- Proxmox Support Team <support@proxmox.com>  Tue,  8 Jul 2008 06:54:03 +0200
 819
 820 pve-installer (1.0-1) stable; urgency=low
 821
 822   * initial release
 823
 824  -- Proxmox Support Team <support@proxmox.com>  Mon, 19 Nov 2007 15:48:05 +0100
 825