1 proxmox-installer (7.2-3) bullseye; urgency=medium
3 * create lvm: improve rounding/alignment
5 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 16:51:40 +0100
7 proxmox-installer (7.2-1) bullseye; urgency=medium
9 * zfs compression - fix wrongly added zle option
11 * fix #4236: split disk space check into soft and hard limits, warn
12 below 8 GB but only hard fail on 2 GB - which can never work
14 * fine tune swap selection for low memory/space setups
16 * lvm create: rework auto-space distribution and improve for low size
17 setups. Avoid a per-default extra free space block if the disk has
18 less than 32 GB of total space. Use the full rest size for root if
19 it's below 12 GB, not much of a point in setting up a data thin LVM
20 for guests then. Then also show a display message if no thin LVM is
21 created to inform the admin.
23 -- Proxmox Support Team <support@proxmox.com> Fri, 18 Nov 2022 10:44:33 +0100
25 proxmox-installer (7.1-2) bullseye; urgency=medium
27 * disks: raid: avoid restting hdsize when reopening options
29 * drop trying to enable timesyncd, wrong since chrony switch & unnecessary
32 * remove /mnt/hostrun after install to avoid lingering directory
34 -- Proxmox Support Team <support@proxmox.com> Thu, 28 Apr 2022 08:08:47 +0200
36 proxmox-installer (7.1-1) bullseye; urgency=medium
39 + add missing newline for chorny log message
40 + add hint that GUI should start and where to find potential errors
41 + do not sync on actual reboot, was already done after installation
44 * proxmox-boot-preparation: add newline to /etc/kernel/cmdline
46 * display disk size with 2 decimal places
48 * zfs create: default to relatime
50 * fix #3905: allow lze/gzip/zstd compression for ZFS
52 * zfs: allow RAID0 with different-sized disks
54 * fix #3188: update hdsize spin-button on disk-selection change
56 * fix #3587: make hdsize configurable for btrfs setups
58 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Apr 2022 14:17:52 +0200
60 proxmox-installer (7.0-7) bullseye; urgency=medium
62 * Revert "bridged network: set bridge HW-address to port one", to subtle to
63 do as static configuration
65 * avoid copying packages into ram, bind-mount into target chroot and extract
68 * unconfigured: avoid doing the reset "sysrq" if possible, prefer a normal
71 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jul 2021 12:16:27 +0200
73 proxmox-installer (7.0-6) bullseye; urgency=medium
75 * bridged network: set bridge HW-address (MAC) to the one of the physical
78 * unconfigured: ifupdown is not used anymore, cope with that
80 * unconfigured: do not unmount /dev to early on shutdown
82 * unconfigured: only log about swap if there's actually one we can deactivate
84 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jul 2021 13:21:09 +0200
86 proxmox-installer (7.0-4) bullseye; urgency=medium
88 * clean disk: sort blockdevs by length to clean depth-first
90 * lvcreate: pass --yes to ensure wipesignatures is answered with go-
93 * try to make LVM less noisy regarding leaked file-descriptors
95 * network: sync bridge option names with pve-common
97 -- Proxmox Support Team <support@proxmox.com> Thu, 24 Jun 2021 11:04:45 +0200
99 proxmox-installer (7.0-3) bullseye; urgency=medium
101 * pid1: shutdown: send a more friendly TERM signal first
103 * Proxmox VE: enable BTRFS support on installation as technology preview
105 -- Proxmox Support Team <support@proxmox.com> Wed, 23 Jun 2021 23:03:22 +0200
107 proxmox-installer (7.0-2) bullseye; urgency=medium
109 * lvm: always tell lvm to wipe the signatures
111 * clean disk: pass all partitions separately to wipe2fs, as else it won't
112 bother cleaning up child ones
114 * disk preparation: make progress report for cleaning up disks slightly more
117 * unconfigured: handle being the new PID 1
119 * unconfigured: heuristically detect high-dpi and adapt debugshell font and
120 GDK_SCALE for the wizard in that case
122 -- Proxmox Support Team <support@proxmox.com> Tue, 15 Jun 2021 15:07:04 +0200
124 proxmox-installer (7.0-1) bullseye; urgency=medium
126 * unify installer packages into single binary-package
128 * use wipefs to really clean the disks used for the root filesystem, as with
129 wiping only the partions through sgdik, things like LVS refuse to operate
130 if they find traces of existing LVs.
132 * override grub default config via installer instead of separate grub
135 * re-build for Debian 11 Bullseye based releases
137 -- Proxmox Support Team <support@proxmox.com> Tue, 25 May 2021 19:54:34 +0200
139 pve-installer (6.4-2) pmg pve; urgency=medium
141 * zfs: assume that all devices are boot devices as firmware is weird and
142 sometimes allows booting only from certain devices, which we cannot know
143 here, and potentially only the boot partition could be corrupted/broken/...
144 in which case another dev in the raid 0 could allow successful booting
146 * legacy BIOS: boot ZFS indirectly using proxmox-boot-tool and the vfat based
147 ESP as the primary boot partition to avoid issues with the ZFS
148 implementation of GRUB.
150 -- Proxmox Support Team <support@proxmox.com> Mon, 26 Apr 2021 18:53:55 +0200
152 pve-installer (6.4-1) pmg pve; urgency=medium
154 * fix #2518: disk selector: add "deselect all" button if there are
155 more than three disks
157 * avoid triggering keyboard layout auto-selection heuristic if it was
160 * partially fix #2804: set debug-console keymap on language selection
162 * fix #3223: fix hardcoded port value in success page html
164 * fix #3165: start chrony after DHCP client for an opportunistic time-sync
166 -- Proxmox Support Team <support@proxmox.com> Fri, 26 Mar 2021 19:47:08 +0100
168 pve-installer (6.3-2) pmg pve; urgency=medium
170 * minor spelling/grammar fixes all over the place
172 * do not configure VT keyboard layout during installation, may hang the
175 -- Proxmox Support Team <support@proxmox.com> Tue, 10 Nov 2020 15:03:14 +0100
177 pve-installer (6.3-1) pmg pve; urgency=medium
179 * fix #2925: edit /etc/kernel/cmdline unconditionally
181 * set console keymap on language selection
183 * fix #3057: remove ext3 option from installer
185 * pbs: actually write out email to user.cfg
187 * network: replace dot notation netmask with CIDR notation as primary input
189 * fix #3093: allow one to automatically reboot on installation success
191 -- Proxmox Support Team <support@proxmox.com> Sun, 08 Nov 2020 19:35:45 +0100
193 pve-installer (6.2-3) pmg pve; urgency=medium
195 * fix #2804: add a root shell on tty3
197 * pbs: update installation html texts
199 -- Proxmox Support Team <support@proxmox.com> Tue, 07 Jul 2020 15:37:04 +0200
201 pve-installer (6.2-2) pmg pve; urgency=medium
203 * write out network configuration in CIDR notation
207 -- Proxmox Support Team <support@proxmox.com> Mon, 25 May 2020 21:10:33 +0200
209 pve-installer (6.2-1) pmg pve; urgency=medium
211 * unconfigured: don't trap "bad" debug-shell exits
213 -- Proxmox Support Team <support@proxmox.com> Sun, 10 May 2020 21:21:10 +0200
215 pve-installer (6.1-4) pmg pve; urgency=medium
217 * unconfigured: allow pseudo terminals, mount devpts
219 * start installer window always in full screen mode
221 * improve spice integration
223 -- Proxmox Support Team <support@proxmox.com> Fri, 24 Apr 2020 19:40:23 +0200
225 pve-installer (6.1-3) pmg pve; urgency=medium
227 * fix behavior if ZFS disks have no /dev/by-id path
229 * restrict admin email to same format as the JSONSchema
231 -- Proxmox Support Team <support@proxmox.com> Fri, 06 Mar 2020 10:57:49 +0100
233 pve-installer (6.1-2) pmg pve; urgency=medium
235 * add all ZFS vdevs with stable by-id device path
237 * fix #1211: allow installation on 4k-native (4kn) disks booting with UEFI
239 -- Proxmox Support Team <support@proxmox.com> Wed, 27 Nov 2019 19:20:45 +0100
241 pve-installer (6.1-1) pmg pve; urgency=medium
243 * raise postifx main.cf compatibility_level to 2
245 * ensure /etc/aliases.db is generated
247 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Nov 2019 10:35:42 +0100
249 pve-installer (6.0-9) pmg pve; urgency=medium
251 * fix #2313: load country.dat file with utf8 encoding
253 -- Proxmox Support Team <support@proxmox.com> Sat, 17 Aug 2019 10:31:38 +0200
255 pve-installer (6.0-8) pmg pve; urgency=medium
257 * success screen: show real final IP addr with port
259 * handle bootloader installation errors gracefully
261 * efiboot: remove redundant call to zz-pve-efiboot
263 -- Proxmox Support Team <support@proxmox.com> Thu, 25 Jul 2019 12:40:37 +0200
265 pve-installer (6.0-5) pmg pve; urgency=medium
267 * hd_list: skip all devices with iso9660 as FS
269 * mount efivarfs to ensure we can read bigger EFI NVRAM backed variables
271 * fix #1603: create a new and unique machine-id
273 * copy /etc/hostid from installer root to target
275 * prompt user if a vgrename is OK for exisiting 'pve'/'pmg' VGs
277 * use pve-efiboot-tool for systemd boot ESP preparation
279 -- Proxmox Support Team <support@proxmox.com> Thu, 11 Jul 2019 19:22:31 +0200
281 pve-installer (6.0-4) pmg pve; urgency=medium
283 * update systemd-boot config after initializing esps
285 * clear zpool labels on selected disks' partitions
287 * use by-id diskpath for zpool create
289 * warn if host memory is less than 1 GB
291 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Jul 2019 18:10:06 +0200
293 pve-installer (6.0-3) pmg pve; urgency=medium
295 * add support for ZFS on EFI
297 -- Proxmox Support Team <support@proxmox.com> Fri, 28 Jun 2019 14:03:21 +0200
299 pve-installer (6.0-2) pmg pve; urgency=medium
301 * add note regarding issues with ZFS on HW raid controller
303 -- Proxmox Support Team <support@proxmox.com> Tue, 25 Jun 2019 10:27:54 +0200
305 pve-installer (6.0-1) pmg pve; urgency=medium
307 * bump for Debian Buster
309 -- Proxmox Support Team <support@proxmox.com> Wed, 22 May 2019 10:02:08 +0200
311 pve-installer (5.0-26) unstable; urgency=medium
313 * ipconf view: only (re)set fields if nic really changed
315 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2019 14:39:35 +0100
317 pve-installer (5.0-25) unstable; urgency=medium
319 * add support for Citrix Hypervisor blockdev
321 * Fix #2009: Recreate hdsize_adj with new hdsize
323 * implement previous button
325 * implement summary/acknowledgement screen
327 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Mar 2019 16:36:13 +0100
329 pve-installer (5.0-24) unstable; urgency=medium
331 * change last button to 'Install'
333 * Reset adjustment for spinbutton_hdsize
335 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2018 16:09:14 +0100
337 pve-installer (5.0-23) unstable; urgency=medium
339 * do not create a swap zvol
341 * unify and adapt disk partitioning
343 * fix #1527: Use 'iso-codes' package country naming
345 * allow more than 26 SCSI disk devices.
347 * fix various grammar and spelling errors
349 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Nov 2018 09:49:44 +0100
351 pve-installer (5.0-22) unstable; urgency=medium
353 * fix #1241: ensure at least 1G of thinpool metadata
355 * handle swapsize=0 correctly
357 * handle maxvz=0 correctly
359 * handle minfree=0 correctly
361 * handle local-only LVM setup
363 -- Proxmox Support Team <support@proxmox.com> Fri, 11 May 2018 13:17:42 +0200
365 pve-installer (5.0-21) unstable; urgency=medium
367 * ipconf.htm: remove pve product name
369 -- Proxmox Support Team <support@proxmox.com> Mon, 22 Jan 2018 07:57:26 +0100
371 pve-installer (5.0-20) unstable; urgency=medium
373 * proxinstall: only display option maxroot for product pve
375 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Dec 2017 07:43:41 +0100
377 pve-installer (5.0-19) unstable; urgency=medium
379 * allow all valid netmasks
381 * html-pmg/extract1-license.htm: fix typo
383 -- Proxmox Support Team <support@proxmox.com> Thu, 14 Dec 2017 11:19:10 +0100
385 pve-installer (5.0-18) unstable; urgency=medium
387 * proxinstall - only creat ezfs data pool for product pve
389 -- Proxmox Support Team <support@proxmox.com> Thu, 23 Nov 2017 09:53:18 +0100
391 pve-installer (5.0-17) unstable; urgency=medium
393 * include svg files for installer banner
395 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 13:12:25 +0100
397 pve-installer (5.0-16) unstable; urgency=medium
399 * pmg: fix lvm volume sizes
401 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 10:26:38 +0100
403 pve-installer (5.0-15) unstable; urgency=medium
405 * dispaly info pages for 15 seconds
407 * Revert "change clamav daily database name to daily.cld"
409 -- Proxmox Support Team <support@proxmox.com> Wed, 22 Nov 2017 09:29:16 +0100
411 pve-installer (5.0-14) unstable; urgency=medium
413 * correctly set PermitRootLogin in sshd_config
415 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 14:15:16 +0100
417 pve-installer (5.0-13) unstable; urgency=medium
419 * change clamav daily database name to daily.cld
421 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 12:31:13 +0100
423 pve-installer (5.0-12) unstable; urgency=medium
425 * pmg: write admin email to /etc/pmg/pmg.conf
427 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 10:26:59 +0100
429 pve-installer (5.0-11) unstable; urgency=medium
431 * pmg: write user.conf to correct location
433 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 09:56:40 +0100
435 pve-installer (5.0-10) unstable; urgency=medium
437 * bump version for testing
439 * implement proxmox mail gateway installation
441 -- Proxmox Support Team <support@proxmox.com> Tue, 21 Nov 2017 08:05:02 +0100
443 pve-installer (5.0-8) unstable; urgency=medium
445 * add support for multiple products (pve, pmg)
447 -- Proxmox Support Team <support@proxmox.com> Mon, 20 Nov 2017 12:47:44 +0100
449 pve-installer (5.0-7) unstable; urgency=medium
451 * kill dhclient before rebooting
453 * ZFS: explicitly export rpool after installation
455 * fix #1479: detect missing KVM support
457 -- Proxmox Support Team <support@proxmox.com> Thu, 19 Oct 2017 10:56:30 +0200
459 pve-installer (5.0-6) unstable; urgency=medium
463 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Aug 2017 13:58:22 +0200
465 pve-installer (5.0-5) unstable; urgency=medium
467 * allow installing without active network devices
469 * fix bug in handling of invalid GeoIP results
471 -- Proxmox Support Team <support@proxmox.com> Wed, 9 Aug 2017 09:41:36 +0200
473 pve-installer (5.0-4) unstable; urgency=medium
475 * rework password and email text
477 -- Proxmox Support Team <support@proxmox.com> Fri, 23 Jun 2017 09:49:38 +0200
479 pve-installer (5.0-3) unstable; urgency=medium
481 * let raid dialogue grow if > 4 disks
483 * add initial check for NICs
485 * ignore link-local addresses
487 * clean disks prior to formatting
489 * explicitly mount ESP as vfat
491 * zero start of partitions after formatting disk
493 * fix XFS mount options
495 -- Proxmox Support Team <support@proxmox.com> Fri, 5 May 2017 12:11:22 +0200
497 pve-installer (5.0-2) unstable; urgency=medium
499 * always select a NIC, even if DHCP fails
501 -- Proxmox Support Team <support@proxmox.com> Tue, 14 Mar 2017 09:44:30 +0100
503 pve-installer (5.0-1) unstable; urgency=medium
505 * rebuild for PVE 5.0
507 * fix #1239: enhance swap on ZFS setup
509 * use iproute2, support interface selection
511 * get DHCP leases on all interfaces
513 * only require grub-efi to succeed if booted using UEFI
515 -- Proxmox Support Team <support@proxmox.com> Mon, 13 Mar 2017 13:03:43 +0100
517 pve-installer (4.0-16) unstable; urgency=medium
519 * actually use more than 8 disks if selected
521 -- Proxmox Support Team <support@proxmox.com> Thu, 15 Dec 2016 10:05:54 +0100
523 pve-installer (4.0-15) unstable; urgency=medium
525 * use explicit partition starts
527 * bump EFI partition size to 256M
529 * compute_swapsize: add return statement
531 -- Proxmox Support Team <support@proxmox.com> Tue, 13 Dec 2016 09:12:20 +0100
533 pve-installer (4.0-14) unstable; urgency=medium
535 * bump version for new RELEASE=4.4
537 -- Proxmox Support Team <support@proxmox.com> Fri, 09 Dec 2016 12:03:00 +0100
539 pve-installer (4.0-13) unstable; urgency=medium
541 * add default invalid mail address
543 * refactor disk setup
545 * add advanced ZFS options
547 * fix #1190: allow ZFS mirrors with slightly different sizes
549 -- Proxmox Support Team <support@proxmox.com> Mon, 05 Dec 2016 10:48:19 +0100
551 pve-installer (4.0-12) unstable; urgency=medium
553 * fix update_progress while extracting files
555 * assume root file system is writable (overlayfs)
557 -- Proxmox Support Team <support@proxmox.com> Wed, 21 Sep 2016 13:12:33 +0200
559 pve-installer (4.0-11) unstable; urgency=medium
561 * use unsquashfs instead of tar
563 -- Proxmox Support Team <support@proxmox.com> Wed, 31 Aug 2016 08:49:30 +0200
565 pve-installer (4.0-10) unstable; urgency=medium
567 * Fix #1054: error on purely numeric hostnames
569 * update layout, use new logo
571 -- Proxmox Support Team <support@proxmox.com> Tue, 09 Aug 2016 09:46:31 +0200
573 pve-installer (4.0-8) unstable; urgency=medium
575 * restrict hdsize if requested
577 -- Proxmox Support Team <support@proxmox.com> Sun, 06 Mar 2016 09:04:44 +0100
579 pve-installer (4.0-7) unstable; urgency=medium
581 * use lvmthin for data volume
583 * create zfs subpool (rpool/data) as VM/CT storage
585 * create better default storage configiguration
587 -- Proxmox Support Team <support@proxmox.com> Tue, 01 Mar 2016 07:16:16 +0100
589 pve-installer (4.0-6) unstable; urgency=medium
591 * install EFI fallback boot file (OVMF does not boot without)
593 -- Proxmox Support Team <support@proxmox.com> Thu, 10 Dec 2015 10:39:46 +0100
595 pve-installer (4.0-5) unstable; urgency=medium
597 * allow up to 8 zfs disks
599 * enable systemd-timesyncd.service by default
601 -- Proxmox Support Team <support@proxmox.com> Fri, 20 Nov 2015 09:07:20 +0100
603 pve-installer (4.0-4) unstable; urgency=medium
607 -- Proxmox Support Team <support@proxmox.com> Tue, 06 Oct 2015 08:22:45 +0200
609 pve-installer (4.0-3) unstable; urgency=medium
611 * zpool create: use cachefile=none
613 * do not mention LVM snapshots
615 -- Proxmox Support Team <support@proxmox.com> Tue, 29 Sep 2015 12:17:57 +0200
617 pve-installer (4.0-2) unstable; urgency=medium
621 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:57:06 +0200
623 pve-installer (4.0-1) unstable; urgency=medium
625 * updates for debian jessie
627 -- Proxmox Support Team <support@proxmox.com> Tue, 16 Jun 2015 11:56:54 +0200
629 pve-installer (3.3-3) unstable; urgency=low
633 -- Proxmox Support Team <support@proxmox.com> Wed, 14 Jan 2015 09:39:28 +0100
635 pve-installer (3.3-2) unstable; urgency=low
637 * support UEFI systems
639 * add new 'Options' Dialog
641 * do not install xorg.conf (not needed, and makes problems with EFI boot)
643 -- Proxmox Support Team <support@proxmox.com> Wed, 01 Oct 2014 09:16:03 +0200
645 pve-installer (3.3-1) unstable; urgency=low
647 * update path for 3.3 release
649 -- Proxmox Support Team <support@proxmox.com> Mon, 08 Sep 2014 12:08:14 +0200
651 pve-installer (3.0-2) unstable; urgency=low
653 * always use GUID partition tables
655 -- Proxmox Support Team <support@proxmox.com> Thu, 09 Jan 2014 16:00:25 +0100
657 pve-installer (3.0-1) unstable; urgency=low
659 * updates for debian wheezy
661 * use webkit instead of gthhtml2
663 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Mar 2013 06:39:42 +0100
665 pve-installer (2.3-6) unstable; urgency=low
667 * fix hdsize algorythm
669 -- Proxmox Support Team <support@proxmox.com> Fri, 01 Mar 2013 10:32:00 +0100
671 pve-installer (2.0-5) unstable; urgency=low
673 * add 'hdsize' boot parameter to specify maximum size used.
675 -- Proxmox Support Team <support@proxmox.com> Fri, 30 Nov 2012 06:18:55 +0100
677 pve-installer (2.0-4) unstable; urgency=low
679 * fix bug #226 && #227: new minfree and maxvz boot options
681 -- Proxmox Support Team <support@proxmox.com> Wed, 18 Jul 2012 05:51:47 +0200
683 pve-installer (2.0-3) unstable; urgency=low
685 * increase free space on LVM up to 16GB
687 -- Proxmox Support Team <support@proxmox.com> Thu, 16 Feb 2012 11:59:55 +0100
689 pve-installer (2.0-2) unstable; urgency=low
691 * support new kernel parameter 'ext4' switch (use ext4 instead of ext3)
693 * use 'ext3' by default
695 -- Proxmox Support Team <support@proxmox.com> Thu, 04 Aug 2011 12:58:27 +0200
697 pve-installer (2.0-1) unstable; urgency=low
701 * align LVM on 128k boundary
703 * use 'parted' to create partitions
705 * support > 2TB disks (use GPT partition tables)
707 * mount with barrier=0 during install (speedup)
709 * write keyboard settings to /etc/pve-installer.cfg
713 * avoid to run update-grub or update-initramfs during install
715 * use --no-triggers for faster unpack
717 * also mount sysfs to /target/sys
719 * do not write /etc/default/grub - not really needed
721 * we now use openbox instead of metacity
723 * wait one second after partitioning (give kernel time to reread part
726 * use update-initramfs -c (instead of -u)
728 * do not write /etc/apache2/ports.conf (not really needed)
730 * enable apache port redirect (a2ensite pve-redirect.conf)
732 -- Proxmox Support Team <support@proxmox.com> Mon, 15 Feb 2010 14:09:46 +0100
734 pve-installer (1.0-9) unstable; urgency=low
738 * use 'udevadm info' to detect disks
740 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:13:11 +0100
742 pve-installer (1.0-8) unstable; urgency=low
744 * use UUID= for /boot in fstab
746 -- Proxmox Support Team <support@proxmox.com> Fri, 22 Jan 2010 13:11:58 +0100
748 pve-installer (1.0-7) unstable; urgency=low
750 * unconfigured.sh: use -q flag for modprobe
752 * proxinstall: use 'removable' flag on older kernels (instead
753 of 'capability') to detect cdroms.
755 -- Proxmox Support Team <support@proxmox.com> Fri, 04 Dec 2009 18:03:59 +0100
757 pve-installer (1.0-6) unstable; urgency=low
759 * pass --no-floppy to grub-install (some users reported delays)
761 -- Proxmox Support Team <support@proxmox.com> Fri, 19 Jun 2009 10:48:37 +0200
763 pve-installer (1.0-5) unstable; urgency=low
765 * fixes for debian lenny
767 * support dynamically allocated virtio blk devices
769 -- Proxmox Support Team <support@proxmox.com> Fri, 08 May 2009 16:53:42 +0200
771 pve-installer (1.0-4) unstable; urgency=low
773 * proxinstall: better postfix configuration
775 -- Proxmox Support Team <support@proxmox.com> Mon, 12 Jan 2009 12:21:13 +0100
777 pve-installer (1.0-3) unstable; urgency=low
779 * ause grub instead of lilo
781 -- Proxmox Support Team <support@proxmox.com> Wed, 20 Aug 2008 14:39:57 +0200
783 pve-installer (1.0-2) stable; urgency=low
785 * proxinstall (extract_data): added maxroot and swapsize boot parameters,
786 set bridge parameters (stp = on, fd = 0)
788 -- Proxmox Support Team <support@proxmox.com> Tue, 8 Jul 2008 06:54:03 +0200
790 pve-installer (1.0-1) stable; urgency=low
794 -- Proxmox Support Team <support@proxmox.com> Mon, 19 Nov 2007 15:48:05 +0100