debian/changelog

   1 ifupdown2 (3.0.0-1) unstable; urgency=medium
   2
   3    * New. Enabled: python3 support
   4
   5  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 01 Oct 2019 23:42:42 +0200
   6
   7 ifupdown2 (2.0.0-1) unstable; urgency=medium
   8
   9   * Introduction of the live netlink cache
  10   * Refactoring and PEP8 fixes
  11   * Install systemd ifupdown2.netowrking.service and ifup.service
  12   * Addons: bond: bond-primary attributes (closes: #9)
  13   * Addons: address-virtual: vrrp support
  14   * Addons: address: add arp-accept option
  15   * Addons: tunnel: adding "tunnel-" prefix to every attributes
  16   * Loopback interface won't go down (unless link-down yes)
  17   * Macvlans (address-virtual) can now be configured without ips
  18   * Add support for vxlan multicast group (vxlan-mcastgrp)
  19   * New sets of poliicies:
  20        - bridge polcy for vxlan port: bridge-vxlan-arp-nd-suppres (ON/off)
  21        - bridge policy for vxlan port: bridge_vxlan_port_learning (ON/off)
  22        - bridge policy for vxlan port:
  23                vxlan_bridge_igmp_snooping_enable_port_mcrouter (1/0)
  24
  25  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 01 Oct 2019 23:42:42 +0200
  26
  27 ifupdown2 (1.2.8-1) unstable; urgency=medium
  28
  29   * New: Add policy dhcp6-duid to specify DUID type to be used for IPv6 interfaces
  30
  31  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 11 Jul 2019 23:42:42 +0200
  32
  33 ifupdown2 (1.2.7-1) unstable; urgency=medium
  34
  35   * New: Add bridge-ports-condone-regex option (closes #117)
  36
  37  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jul 2019 23:42:42 +0200
  38
  39 ifupdown2 (1.2.6-1) unstable; urgency=medium
  40
  41   * Fix: AttributeError exception in bridge module (fixes #90)
  42   * Fix: ifupdownaddons: LinkUtils fix cmd concatenation (closes: #930839)
  43   * New. policymanager: merge module policy instead of overriding duplicates
  44   * New: set default mtu on user defined device (via link-type)
  45   * New: add support for vxlan-ttl attribute
  46   * New: add support for vrrp attribute
  47   * New: introduce new bridge policy:
  48         "vxlan_bridge_igmp_snooping_enable_port_mcrouter"
  49   * New: link-down yes will also down macvlans
  50   * New: XFRM addon module
  51   * New: Add policy to wait for IPv6 link local address to be available
  52
  53  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 23 Jun 2019 23:42:42 -1000
  54
  55 ifupdown2 (1.2.5-1) unstable; urgency=medium
  56
  57   * Fix: ifupdown2 scripts: log warning on EACCES exception (Fixes #89)
  58   * Fix: debian: install sysvinit script (closes: #918775)
  59   * Fix: debian: postinst: remove diversion after upgrade from stretch
  60          (closes: #919443)
  61
  62  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 21 Jan 2019 23:42:42 +8000
  63
  64 ifupdown2 (1.2.4-1) unstable; urgency=medium
  65
  66   * Fix: statemanager directory path customization via ifupdown2.conf
  67          (closes: #918832)
  68
  69  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 11 Jan 2019 23:42:42 +0000
  70
  71 ifupdown2 (1.2.3-1) unstable; urgency=medium
  72
  73   * Fix: log: use stderr if syslog initialization fails (closes: #917534)
  74
  75  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 30 Dec 2018 23:42:42 +0700
  76
  77 ifupdown2 (1.2.2-1) unstable; urgency=medium
  78
  79   * New: add support for B.A.T.M.A.N. adv. attributes
  80   * New: support for new iproute2 format (bridge vlan show)
  81   * New: add new checks for existing device with vxlan attributes
  82   * Fix: pypi install: local addons modules should be loaded first
  83   * Fix: link-down yes on vrf slaves
  84   * Fix: nlmanager: use strerror to format kernel error
  85   * Fix: ethtool: FEC: translate None and NotSupported values to link-fec off
  86   * Fix: man: remove non-implemented -m option (closes: #905572)
  87
  88  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 20 Dec 2018 23:42:42 +0000
  89
  90 ifupdown2 (1.2.1) UNRELEASED; urgency=medium
  91
  92   * Fix #54: address module new l3_intf_default_gateway_set_onlink policy
  93   * Fix: Link down does not work on any intf configured in a VRF
  94   * Add: ethtool: add link-speed 10 to valid values array
  95   * Add: address: add l3_intf_arp_accept policy to control ARP_ACCEPT
  96   * Add: warning when bridge attribute are used on non br[port] intf
  97   * Add: point-to-point protocol (ppp) addon to create/configure ppp interfaces
  98   * Add: tunnel support (gretap, ipip, sit, vti, ip6gre, ipip6, ip6ip6, vti6)
  99   * Add: 0/1/on/off/yes/no support to ip[6]-forward attribute
 100   * Add: address module_globals policy l3_intf_arp_accept to control ARP_ACCEPT
 101   * addressvirtual module_globals "addressvirtual_with_route_metric" policy
 102   * Closes: ethtool: link-fec: local variable 'fec_attrs'
 103             referencede before assignment
 104   * Fix: ifquery -r incorrect for address-virtual and vrf configuration under
 105          an interface
 106
 107  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 24 Oct 2018 23:42:42 +0200
 108
 109 ifupdown2 (1.2.0) UNRELEASED; urgency=medium
 110
 111   * Package architecture refactoring and cleanups
 112   * Package can be build/install as debian, pip or rpm package
 113   * Makefile to easily perform tasks (i.e.: install, build, test, upload..)
 114   * VRF slaves: add support for link-down yes
 115   * addressvirtual: macvlan: add default metric to ip4 and ip6
 116   * Closes #48: Run up/down on "manual" interfaces, but ignore any errors.
 117   * Closes #58: address addon "vlan_aware_bridge_address_support" policy
 118   * Traditional bridge support for mstpctl attr: (portautoedge, portrestrrole)
 119   * Configuration for IPv6 link-local auto-generate mode, new attributes:
 120         ipv6-addrgen (address addon)
 121         address-virtual-ipv6-addrgen (addressvirtual addon)
 122
 123  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 25 Jun 2018 23:42:42 +0200
 124
 125 ifupdown2 (1.1.18) UNRELEASED; urgency=medium
 126
 127   * Fix: Link down does not work on SVI configured in a VRF
 128   * Fix: ifreload causes MTU to drop on bridge SVIs
 129   * Fix: addons: addressvirtual: check if SVI name is first in routing table
 130   * Fix: ifreload error on deleting bond slaves from an already configured bond
 131   * Fix: ifupdown2 error is confusing when netmask is specified for vxlan-local-tunnelip
 132   * Fix: ifupdown2 syntax check needed for vxlan interfaces
 133   * Fix: vxlan-ageing default timer doesn't align with bridge-ageing
 134   * Fix: Error with "ifreload -a -n" when MGMT VRF is not Applied
 135   * Fix: using reserved VLAN range reports error but ifreload returns 0
 136   * Fix: unable to set bridge-portmcrouter to "2"
 137   * Fix: vxlan syntax-check warn on missing vxlan-local-tunnelip
 138   * Fix: traditional bridge svi breaks when extra bridge added
 139   * Fix: github #39: addons: vrf: fix vrf slave link kind
 140   * New. Enabled: addons: vxlan: add support for vxlan-port attribute
 141
 142  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 12 Apr 2018 11:10:04 +0200
 143
 144 ifupdown2 (1.1.17) UNRELEASED; urgency=medium
 145
 146   * Fix: ip[6]-forward attributes not set at boot
 147
 148  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 08 Feb 2018 09:48:37 +0100
 149
 150 ifupdown2 (1.1.16) UNRELEASED; urgency=medium
 151
 152   * Fix: python exception on macvlans address dump
 153   * Fix: eth0 doesn't acquire DHCP address when mgmt VRF is enabled
 154
 155  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 09 Jan 2018 02:02:58 +0100
 156
 157 ifupdown2 (1.1.15) UNRELEASED; urgency=medium
 158
 159   * New. Enabled: bridge: add support for bridge-l2protocol-tunnel
 160   * New. Enabled: bridge attributes, when removed reset to default
 161   * New. Enabled: vxlan attributes, when removed reset to default
 162   * New. Enabled: improve handling of optional resources (if missing bridge-utils/ethtool)
 163   * Fix: policy "iface_defaults" not supported for MTU
 164   * Fix: address module: handling of ipv4 & ipv6 (add/remove)
 165   * Fix: warning for vlan reserved range
 166   * Fix: MTU handling on bridge SVIs
 167
 168  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 22 Nov 2017 19:07:43 +0100
 169
 170 ifupdown2 (1.1.14) UNRELEASED; urgency=medium
 171
 172   * New. Enabled: default policy for bridge MAC address
 173   * Fix: ethtool: don't set link speed and duplex if autoneg is on
 174
 175  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 25 Oct 2017 23:12:27 +0200
 176
 177 ifupdown2 (1.1.13) UNRELEASED; urgency=medium
 178
 179   * Fix: VRF: ssh session not killed on ifreload
 180
 181  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 15 Sep 2017 22:43:12 +0200
 182
 183 ifupdown2 (1.1.12) UNRELEASED; urgency=medium
 184
 185   * New. Enabled: mpls-enable attribute
 186   * New. Enabled: bond and bridge module moved to netlink configuration
 187   * New. Enabled: handle a mix of auto and specified vrf table ids
 188   * Fix: igmp attribute reset to defaults when removed from config
 189
 190  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 07 Aug 2017 22:14:03 +0200
 191
 192 ifupdown2 (1.1.11) UNRELEASED; urgency=medium
 193
 194   * Fix: link-down attribute not applied on slave ports
 195   * Fix: bug that prevented config of mtu below 1280
 196
 197  -- Julien Fortin <julien@cumulusnetworks.com>  Thu, 18 May 2017 12:45:21 -0700
 198
 199 ifupdown2 (1.1.10) UNRELEASED; urgency=medium
 200
 201   * New. Enabled: drop the dependency to pkg_resources, hardcode version number (closes: #855401)
 202   * New. Enabled: adjust allow-hotplug behavior to ifupdown (closes: #855598)
 203   * New. Enabled: bond-lacp-rate support slow/fast argument
 204   * New. Enabled: ifquery --syntax-help: add support for json output
 205   * New. Enabled: vlan: add new attribute 'vlan-protocol'
 206   * New. Enabled: address: add new attribute 'ip6-forward'
 207   * New. Enabled: bridge: add new attribute 'bridge-mcstats'
 208   * New. Enabled: bridge: add new attribute 'bridge-vlan-stats'
 209   * New. Enabled: bridge: add new attribute 'bridge-vlan-protocol'
 210   * New. Enabled: bridge: add new attribute 'bridge-arp-nd-suppress'
 211   * Fix: bond: add attribute bond-(up|down)delay
 212   * Fix: bridge-vids: --syntax-check accepts legacy syntax
 213
 214  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 17 Apr 2017 06:18:04 +0200
 215
 216 ifupdown2 (1.1.9) UNRELEASED; urgency=medium
 217
 218   * New. Enabled: support for bridge-learning attribute
 219
 220  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 06 Feb 2017 13:22:51 -0800
 221
 222 ifupdown2 (1.1.8) UNRELEASED; urgency=medium
 223
 224   * New. Enabled: update link-speed values: add 25G and 50G
 225   * New. Enabled: new 'link-down' [yes|no] attribute to keep link down
 226
 227  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 17 Jan 2017 08:39:29 +0100
 228
 229 ifupdown2 (1.1.7) UNRELEASED; urgency=medium
 230
 231   * New. Enabled: fix for inet and inet6 dhcp on the same interface
 232   * New. Enabled: syntax check to warn on common configuration mistakes
 233   * New. Enabled: addons: bridge: disable ip fwding on a bridge with no ip
 234     and no upperifaces
 235   * Fix: fixes for MTU handling
 236   * Fix: dhcpv6 fails if interface doesn't have link-local addr
 237
 238  -- Julien Fortin <julien@cumulusnetworks.com>  Wed, 07 Dec 2016 05:48:45 +0100
 239
 240 ifupdown2 (1.1.6) UNRELEASED; urgency=medium
 241
 242   * Closes: github #14. add environment variables passed to user scripts
 243   * New. Enabled: addons may provide a list of ifupdown scripts to ignore
 244
 245  -- Julien Fortin <julien@cumulusnetworks.com>  Mon, 19 Sep 2016 16:37:36 -0700
 246
 247 ifupdown2 (1.1.5) UNRELEASED; urgency=medium
 248
 249   * Fix: handling of EXISTS errors on address add
 250   * Fix: handling of mtu on addressvirtual macvlan devices
 251   * Fix: mako namespace handling
 252
 253  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 16 Sep 2016 12:48:04 -0700
 254
 255 ifupdown2 (1.1.4) UNRELEASED; urgency=medium
 256
 257   * Performance improvements
 258   * New. Enabled: sbin: start-networking: support hotplug class from init script
 259   * New. Enabled: support for classical numerical bond modes
 260   * New. Enabled: extend ifquery support for mstpctl addons
 261   * New. Enabled: each addon may perform semantic and syntax checks by
 262     implementing a custom method
 263   * Fix: Support for address-virtual lines under a vrf slave
 264   * Fix: Defaults for link attributes were not applied
 265   * Fix: Disable IPv6 duplicate address detection on VRR interfaces
 266   * Fix: ifquery to extract vlan-id from iface if not preset
 267   * Fix: ifquery -c bridge pvid error on a valid config
 268
 269  -- Julien Fortin <julien@cumulusnetworks.com>  Fri, 29 Jul 2016 08:55:50 -0700
 270
 271 ifupdown2 (1.1.3) UNRELEASED; urgency=medium
 272
 273   * Fix: Interface configuration parsing error when keyword vlan
 274     is the interface name.
 275
 276  -- Julien Fortin <julien@cumulusnetworks.com>  Sun, 05 Jun 2016 08:55:50 -0700
 277
 278 ifupdown2 (1.1.2) UNRELEASED; urgency=medium
 279
 280   * Fix: checks for invalid address-virtual attributes
 281   * New. Deprecated: `mstpctl-stp` attribute
 282   * New. Deprecated: lacp parameters: bond-ad-sys-priority, bond-ad-sys-mac-addr
 283   * New. Enabled: addon module for configuring vrf
 284   * New. Enabled: bridge: display warning when (in vlan unware bridge)
 285     an untagged bridge is not configured
 286   * New. Enabled: adjusting MTU for vlan devices depending on lower device mtu
 287   * New. Enabled: introduce checks for reserved vrf table names
 288   * New. Enabled: ifquery: new option '--with-defaults' to include default
 289     attributes
 290   * New. Enabled: bridge: disabling ipv6 on bridge if any VXLAN port
 291   * New. Enabled: vrf awareness in dhcp addon module
 292
 293  -- Julien Fortin <julien@cumulusnetworks.com>  Tue, 3 May 2016 14:42:42 -0700
 294
 295 ifupdown2 (1.1) unstable; urgency=low
 296
 297   * Initial release.
 298
 299  -- Roopa Prabhu <roopa@cumulusnetworks.com>  Thu, 20 Aug 2015 06:14:24 -0700