debian.snapdragon/changelog

   1 linux-snapdragon (4.4.0-1013.15) UNRELEASED; urgency=low
   2
   3   CHANGELOG: Do not edit directly. Autogenerated at release.
   4   CHANGELOG: Use the printchanges target to see the curent changes.
   5   CHANGELOG: Use the insertchanges target to create the final log.
   6
   7  -- Kamal Mostafa <kamal@canonical.com>  Fri, 13 May 2016 08:00:21 -0700
   8
   9 linux-snapdragon (4.4.0-1013.14) xenial; urgency=low
  10
  11   [ Kamal Mostafa ]
  12
  13   * Release Tracking Bug
  14     - LP: #1578759
  15
  16   * Rebase to Ubuntu-4.4.0-22.39
  17
  18  -- Kamal Mostafa <kamal@canonical.com>  Thu, 05 May 2016 11:17:11 -0700
  19
  20 linux-snapdragon (4.4.0-1013.13) xenial; urgency=low
  21
  22   [ Kamal Mostafa ]
  23
  24   * Release Tracking Bug
  25     - LP: #1575237
  26
  27   * Miscellaneous Ubuntu changes
  28     - [Config] updateconfigs after 4.4.0-22.38 rebase
  29
  30  -- Kamal Mostafa <kamal@canonical.com>  Tue, 26 Apr 2016 08:27:08 -0700
  31
  32 linux-snapdragon (4.4.0-1012.12) xenial; urgency=low
  33
  34   [ Tim Gardner ]
  35
  36   * Release Tracking Bug
  37     - LP: #1572284
  38
  39   * Rebase to Ubuntu-4.4.0-21.37
  40
  41  -- Tim Gardner <tim.gardner@canonical.com>  Tue, 19 Apr 2016 13:03:54 -0600
  42
  43 linux-snapdragon (4.4.0-1011.11) xenial; urgency=low
  44
  45   [ Tim Gardner ]
  46
  47   * Release Tracking Bug
  48     - LP: #1567379
  49
  50   * Miscellaneous Ubuntu changes
  51     - [Config] disable PROVE_LOCKING
  52     - [Config] PREEMPT_VOLUNTARY=y
  53     - [Config] disable DEBUG_LOCK_ALLOC
  54     - [Config] disable DEBUG_SPINLOCK
  55     - [Config] disable DEBUG_MUTEXES
  56     - [Config] INLINE_*_UNLOCK=y
  57
  58   * Miscellaneous upstream changes
  59     - arm64: clean up defconfig with savedefconfig
  60     - configs: add SPI_SPIDEV as module in distro.config
  61     - arm64: dts: apq8016-sbc: Add aliases to spi device.
  62     - regulator: qcom_spmi: Add slewing delays for all SMPS types
  63     - regulator: qcom_spmi: Only use selector based regulator ops
  64
  65  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 06 Apr 2016 16:29:44 +0200
  66
  67 linux-snapdragon (4.4.0-1010.10) xenial; urgency=low
  68
  69   [ Tim Gardner ]
  70
  71   * Release Tracking Bug
  72     - LP: #1563910
  73   * Rebase to Ubuntu-4.4.0-17.33
  74
  75   * Miscellaneous Ubuntu changes
  76     - handle rprovides via dpkg-gencontrol
  77     - [Config] updateconfigs after rebase to Ubuntu-4.4.0-17.33
  78
  79  -- Tim Gardner <tim.gardner@canonical.com>  Wed, 30 Mar 2016 08:30:18 -0600
  80
  81 linux-snapdragon (4.4.0-1009.9) xenial; urgency=low
  82
  83   * rebased on Ubuntu-4.4.0-13.29
  84   * Feature Freeze Exception (LP: #1558535)
  85
  86  -- Tim Gardner <tim.gardner@canonical.com>  Tue, 15 Mar 2016 15:33:32 -0600
  87
  88 linux-snapdragon (4.4.0-1008.8) xenial; urgency=low
  89
  90   [ Paolo Pisati ]
  91
  92   * Rebased on Ubuntu-4.4.0-11.26
  93
  94   * Miscellaneous Ubuntu changes
  95     - [Config] CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
  96
  97  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 10 Mar 2016 11:16:08 +0100
  98
  99 linux-snapdragon (4.4.0-1007.7) xenial; urgency=low
 100
 101   [ Paolo Pisati ]
 102
 103   * Rebased on Ubuntu-4.4.0-10.25
 104
 105   * need arm64 acpi parking protocol support in xenial (LP: #1547047)
 106     - arm64: kernel: implement ACPI parking protocol
 107
 108   * Miscellaneous Ubuntu changes
 109     - [Config] ARM64_ACPI_PARKING_PROTOCOL=y
 110
 111  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 07 Mar 2016 15:57:39 +0100
 112
 113 linux-snapdragon (4.4.0-1006.6) xenial; urgency=low
 114
 115   [ Paolo Pisati ]
 116
 117   * Updated qcomlt-4.4 BSP @ 86e3204d9
 118   * Rebased on Ubuntu-4.4.0-6.21
 119
 120   * Miscellaneous Ubuntu changes
 121     - [Config] updateconfigs
 122
 123   * Miscellaneous upstream changes
 124     - ASoC: qcom: use snd_dma_alloc/free* apis
 125     - ASoC: qcom: add wrdma register details to lpass_variant
 126     - ASoC: qcom: rename rdmactl_audif_start to dmactrl_audif_start
 127     - ASoC: qcom: pass direction to dma allocation
 128     - ASoC: qcom: ipq806x: add error in dma allocation.
 129     - ASoC: qcom: ipq806x: add wrdma related register offsets
 130     - ASoC: qcom: add mic related i2s control register defines
 131     - ASoC: qcom: add wrdma dma channel start
 132     - ASoC: qcom: rename rdma_ch_bit_map to dma_ch_bit_map
 133     - ASoC: qcom: apq8016: add wrdma support
 134     - ASoC: qcom: add wrdma register definations
 135     - ASoC: qcom: add generic bit masks for RDMA and WRDMA
 136     - ASoC: qcom: apq8016: set the correct max register for regmap
 137     - ASoC: qcom: add mic support
 138     - ASoC: qcom: apq8016-sbc: add mic support
 139     - ASoC: add audio routing support
 140     - arm64: dts: qcom: add audio capture support
 141     - drm/i2c: adv7511: Add HPD support
 142     - arm64: dts: qcom: apq8016-sbc: Enable ADV7533 interrupts
 143     - dts: arm64: qcom: remove dmic pins in default pinctrl
 144     - ASoC: codec: msm8x16: check return value of msm8x16_wcd_codec_parse_dt
 145     - ASoC: codec: msm8x16: enable regulators before accessing registers
 146     - drm/msm: Boost the GPU clock on msm8916 for better performance
 147     - firmware: qcom: scm: Convert to platform driver
 148     - firmware: scm: make scm_init call from probe
 149     - arm64: dts: qcom : add scm device node
 150     - firmware: scm: make scm clks optional
 151     - arm: dts: qcom : add scm device node
 152     - iommu: qcom: check scm avaiablity before initialization.
 153     - ARM: dts: ifc6410: remove pinctrl defaults from gpio node.
 154
 155  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 26 Feb 2016 14:39:48 +0100
 156
 157 linux-snapdragon (4.4.0-1005.5) xenial; urgency=low
 158
 159   [ Paolo Pisati ]
 160
 161   * SAUCE: dtb: add a custom apq8016 for snappy with sdhc_2's vmmc-supply
 162     disabled
 163
 164  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 19 Feb 2016 13:34:25 +0100
 165
 166 linux-snapdragon (4.4.0-1004.4) xenial; urgency=low
 167
 168   [ Paolo Pisati ]
 169
 170   * [Config] MMC_BLOCK_MINORS=32
 171
 172  -- Paolo Pisati <paolo.pisati@canonical.com>  Tue, 09 Feb 2016 10:27:30 +0100
 173
 174 linux-snapdragon (4.4.0-1003.3) xenial; urgency=low
 175
 176   [ Upstream Kernel Changes ]
 177
 178   * arm64: dts: qcom: fix typo in usb id pins
 179   * usb: phy: msm: Fix state machine worker logic for OTG mode.
 180
 181  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 05 Feb 2016 14:38:07 +0100
 182
 183 linux-snapdragon (4.4.0-1002.2) xenial; urgency=low
 184
 185   [ Paolo Pisati ]
 186
 187   * [Config] copy annotations from master
 188   * [Config] updateconfigs
 189   * [Config] better align config with qcomlt-4.4
 190   * [Config] FTBFS: disable DRM_PANEL_SIMPLE
 191
 192  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 04 Feb 2016 17:21:00 +0100
 193
 194 linux-snapdragon (4.4.0-1001.1) xenial; urgency=low
 195
 196   [ Paolo Pisati ]
 197
 198   * Imported http://git.linaro.org/landing-teams/working/qualcomm/kernel.git - qcomlt-4.4 @ 17a6dbb
 199   * Rebased on Ubuntu-4.4.0-2.16
 200
 201   [ Upstream Kernel Changes ]
 202
 203   * mmc: mmci: Support any block sizes for ux500v2 and qcom variant
 204   * hid: add support for Lilliput touchscreen
 205   * ARM: qcom_defconfig: Add QCOM specific drivers
 206   * arm:multi_v7_defconfig: Add QCOM specific Kconfigs
 207   * WIP:pwrseq: Convert in to proper platform device
 208   * iommu:msm: fix compilation error.
 209   * Input: pm8941: Add RESIN_N input handling
 210   * media: v4l2-controls: add h264 5.2 level and constrained high profile
 211   * media: vidc: Qualcomm video encoder/decoder driver
 212   * PCI: designware: add memory barrier after enabling region
 213   * DT: PCI: qcom: Document PCIe devicetree bindings
 214   * PCI: qcom: Add Qualcomm PCIe controller driver
 215   * drm/edid: Add support to get edid early
 216   * drm/edid: export edid_vendor()
 217   * drm/panel: simple-panel: Add panel picker support.
 218   * drm/msm: mdp4 lvds: continue if the panel is not connected
 219   * drm/msm: mdp4 lvds: Check the panel node in detect_panel()
 220   * devicetree: Add hardware rng entry to qcom-apq8064.dtsi
 221   * ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
 222   * ARM: dts: qcom: apq8064: Declare all pm8921 regulators
 223   * ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
 224   * arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
 225   * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
 226   * ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
 227   * ARM: dts: apq8064: add pcie devicetree node
 228   * ARM: dts: ifc6410: enable pcie dt node for this board
 229   * ARM: dts: apq8064: Add MDP support
 230   * ARM: dts: ifc6410: enable MDP support
 231   * ARM: dts: qs600: enable MDP support
 232   * ARM: dts: ifc6410: add inforce LVDS panel support
 233   * ARM: dts: APQ8064: Add iommu
 234   * ARM: dts: apq8064: add pci support in CM QS600
 235   * ARM: dts: qcom: Add necessary DT data for Krait cpufreq
 236   * ARM: qcom: add description of KPSS WDT for APQ8064
 237   * ARM: dts: apq8064: Assign a power supply to each CPU
 238   * ARM: dts: apq8064: Add OPP data for frequencies above 1ghz
 239   * ARM: dts: apq8064: Add thermal cooling maps
 240   * ARM: dts: apq8064: Add voltage ranges of the SAW2 regulators
 241   * ARM: dts: apq8064: Add reference to the L2 clock
 242   * ARM: dts: apq8064: Add a DT node for the L2 data
 243   * ARM: dts: apq8064: Add ADM configuration node
 244   * arm: dts: Added eInfochips ERAGON600 board support
 245   * ARM: dts: ifc6410: HACK add bt reset gpios to pwrseq
 246   * ARM: dts: apq8064: Increase critical temperature to 110C
 247   * arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
 248   * arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations
 249   * arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX
 250   * arm64: dts: qcom: Make msm8916-mtp compatible string compliant
 251   * arm64: dts: qcom: Alias pm8916 on msm8916 devices
 252   * arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators
 253   * arm64: dts: fix the i2c aliasing to match to schematics.
 254   * arm64: dts: set the default i2c pin drive strength to 16mA
 255   * arm64: dts: qcom: Add MSM8916 SMEM nodes
 256   * arm64: dts: qcom: Add RPM/SMD support on MSM8916
 257   * arm64: dts: Add PM8916 support on MSM8916
 258   * arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons
 259   * arm64: dts: qcom: Add pm8994 gpios and MPPs
 260   * arm64: dts: apq8016-sbc: enable UART0 on LS connector
 261   * arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
 262   * devicetree: bindings: Document qcom,msm-id and qcom,board-id
 263   * arm64: dts: Add Qualcomm MSM8916 & MTP8916 ids
 264   * DT: arm64: msm8916-mtp: enable spi3
 265   * arm64: dts: qcom: Add APQ8016 SBC support
 266   * arm64: dts: qcom: Add USB related device nodes on APQ8016 SBC board
 267   * arm64: dts: qcom: Add sdhci support for APQ8016 SBC board
 268   * arm64: dts: Add nodes we need for SMP boot
 269   * ARM: dts: Enable SD card (disable vmcc)
 270   * arm64: msm8916 dtsi: Add mdss support
 271   * arm64: sb8016: Add ADV7533 bridge in sbc8016 dtsi
 272   * arm64: dts: Add apq8016-sbc hdmi audio support
 273   * arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
 274   * arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
 275   * arm64: dts: qcom: apq8016-sbc: add D+/D- route switch GPIO
 276   * arm64: dts: qcom: apq8016-sbc: Fix sdhci pinctrl default state name
 277   * arm64: dts: qcom: apq8016-sbc: Enable SD card slot
 278   * arm64: dts: qcom: Fix MPP's function used for LED control
 279   * arm64: dts: qcom: Enable USB manual pullup on msm8916
 280   * arm64: dts: qcom: msm8916: Add RPMCC DT node
 281   * arm64: dts: qcom: msm8916: Add A53 DT node
 282   * arm64: dts: Add cpufreq-dt support for msm8916
 283   * arm64: dts: Add clock-latency for msm8916
 284   * arm64: dts: Add CPR DT node for msm8916
 285   * arm64: dts: Add cpu-supply properties for cpufreq
 286   * arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
 287   * arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes
 288   * arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
 289   * arm64: dts: Add spmi-regulator nodes for pm8916
 290   * arm64: dts: msm8916: Add cpu cooling maps
 291   * WIP: dt: add support for gpu on msm8916/apq8016
 292   * DT: arm64: add iommu dtsi files
 293   * arm64: dt: Add WCNSS related nodes
 294   * dts: arm64: apq8016-sbc: enable LS 1.8v regulator by default
 295   * ARM64: dts: Fix the missing usb otg regulators.
 296   * arm64: dts: Fix memory region descriptions
 297   * arm64: dts: msm8916: add wcd codec support
 298   * arm64: dts: add support to analog audio playback
 299   * arm64: dts: qcom: 8x16: Add fixed rate on-board XO oscillator
 300   * arm64: dts: qcom: Add msm8916 CoreSight components
 301   * dts: qcom: Add CoreSight components for MSM8916
 302   * arm64: dts: Fix the hypervisor and tz memory region size
 303   * arm64: dts: remove the #if 0 around bluetooth
 304   * wcn36xx: Update DT to support wcn36xx wifi driver
 305   * WIP:dts: arm64: add q6v5 pil support
 306   * arm64: dt: Add msm bus nodes
 307   * arm64: dts: usb: Add bus scaling suppport
 308   * arm64: dts: Add rpm_log support
 309   * dts: arm64: msm8916: add vidc dt nodes
 310   * dts: arm64: qcom: apq8016-sbc: enable vidc and vidc-rproc
 311   * arm64: apq8016-sbc.dtsi: Add regulators needed by adv7533
 312   * arm64: msm8916-mdss.dtsi: Add bus scaling properties for mdp
 313   * arm64: dts: Align msm8916 cpu thermal trip point ranges
 314   * arm64: dts: qcom: apq8016-sbc: Add Volume Up key device node
 315   * arm64: dts: qcom: apq8016-sbc: Add Volume Down definitions
 316   * arm64: dts: qcom: apq8016-sbc: Limit MPP4 high state to 1.8V
 317   * arm64: dts: apq8016-sbc: add regulators support
 318   * arm64: dts: move smem node after the soc node
 319   * arm64: dts: add spmi prefix to regulators
 320   * WIP: update iommu header
 321   * soc: qcom: import socinfo.h
 322   * iommu: qcom: forward port iommu v1
 323   * iommu: qcom: v1: rework secure part and build
 324   * iommu: qcom: v1: fix wrong sg interator
 325   * iommu: msm: Invalidate properly from iommu_unmap
 326   * arm64: provide dma cache routines with same API as 32 bit
 327   * qcom: iommu: Make use of domain_alloc and domain_free
 328   * DOWNSTREAM: drm/msm: use downstream iommu
 329   * iommu/msm: Add DT adaptation
 330   * iommu/msm: Move the contents from msm_iommu_dev.c to msm_iommu.c
 331   * iommu/msm: Add support for generic master bindings
 332   * iommu/msm: Set cacheability attributes without tex remap
 333   * temp: Add dummy msm_iommu_get_ctx and fix broken build
 334   * arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
 335   * of: dma: Move range size workaround to of_dma_get_range()
 336   * of: dma: Make of_dma_deconfigure() public
 337   * of: dma: Split of_configure_dma() into mask and ops configuration
 338   * drivers: platform: Configure dma operations at probe time
 339   * iommu: of: Document the of_iommu_configure() function
 340   * iommu: of: Handle IOMMU lookup failure with deferred probing or error
 341   * drm/msm: temp: Add a check to be compatible against both iommuv0/v1
 342   * iommu/msm: Fix "scheduling while atomic" bug
 343   * pci: use new of_dma_configure* apis
 344   * dt/bindings: qcom_adm: Fix channel specifiers
 345   * dmaengine: Add ADM driver
 346   * dmaengine: adm: Fix ADM hardware descriptor creation when flow control
 347     is enabled
 348   * dmaengine: adm: Use 'soft' flush when stopping DMA
 349   * dmaengine: adm: Don't reset controller during probe
 350   * dmaengine: adm: Start next DMA even if there is no ongoing transaction
 351   * ARM: cpuidle: Add cpuidle support for QCOM cpus
 352   * arm64: defconfig: qcom: Enable restart driver
 353   * arm64: introduce CPU_OF_TABLES for cpu ops selection
 354   * arm64: smp: move the pen to a header file
 355   * arm64: qcom: add cpu operations
 356   * arm64: defconfig: add qcom specifics
 357   * common: DMA-mapping: Add strongly ordered memory attribute
 358   * arm: Add option to skip buffer zeroing
 359   * arm64: Add support for DMA_ATTR_STRONGLY_ORDERED
 360   * arm64: dma-mapping: add support for IOMMU mapper
 361   * arm64: mm: Fix a bug in iommu dma-mapping
 362   * arm64: dma-mapping: fix DMA_ATTR_STRONGLY_ORDERED in __get_dma_pgprot
 363   * arm64: dma-mapping: map sg lists into the SMMU as virtually contiguous
 364   * arm64: fixup for mm renames
 365   * drm/mipi_dsi: refactor device creation
 366   * drm/mipi_dsi: check for used channels
 367   * drm/mipi_dsi: Create dummy DSI devices
 368   * drm/mipi_dsi: Get DSI host by DT device node
 369   * drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled
 370   * drm/i2c: adv7511: Initial support for adv7533
 371   * drm/i2c: adv7511: Refactor encoder slave functions
 372   * drm/i2c: adv7511: Add drm_bridge/connector for ADV7533
 373   * drm/i2c: adv7511: Create mipi_dsi_device for ADV7533
 374   * drm/i2c: adv7511: setup CEC registers during power off-power-on
 375     sequence
 376   * drm/i2c: adv7511: Use internal timing generator
 377   * drm/i2c: adv7511: Change DSI lanes dynamically
 378   * drm/i2c: adv7511: Move the common data structures to header file
 379   * drm/i2c: adv7511: Add Audio support.
 380   * drm/i2c: adv7511: Enable the audio data and clock pads on adv7533
 381   * HACK: drm/i2c: adv7511: Remove hotplug event handling
 382   * drm/i2c: adv7511: move to use reg_sequence
 383   * drm/i2c: adv7511: fixup the dapm bias level access
 384   * drm/i2c: adv7511: Init regulators
 385   * clk: qcom: gdsc: Use PM clocks to control gdsc clocks
 386   * clk: qcom: gdsc: Enable an RCG before turing on the gdsc
 387   * clk: qcom: gdsc: Manage clocks with !CONFIG_PM
 388   * clk: qcom: common: Add API to register board clocks backwards
 389     compatibly
 390   * clk: qcom: Move cxo/pxo/xo into dt files
 391   * clk: qcom: msm8916: Move xo and sleep clocks into DT
 392   * ARM: Add Krait L2 register accessor functions
 393   * clk: Avoid sending high rates to downstream clocks during set_rate
 394   * clk: mux: Split out register accessors for reuse
 395   * clk: Add safe switch hook
 396   * clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
 397   * clk: qcom: Add HFPLL driver
 398   * clk: qcom: Add MSM8960/APQ8064's HFPLLs
 399   * clk: qcom: Add IPQ806X's HFPLLs
 400   * clk: qcom: Add support for Krait clocks
 401   * clk: qcom: Add KPSS ACC/GCC driver
 402   * clk: qcom: Add Krait clock controller driver
 403   * cpufreq: Add module to register cpufreq on Krait CPUs
 404   * clk: qcom: Add support for SMD-RPM Clocks
 405   * clk: qcom: Add support for RPM Clocks
 406   * clk: qcom: Add support for msm8974 RPM-SMD clocks
 407   * clk: qcom: msm8974: Remove gfx3d clock from MMCC
 408   * clk: qcom: Add support for apq8084 RPM-SMD clocks
 409   * clk: qcom: Add support for regmap mux-div clocks
 410   * clk: qcom: Add A53 clock driver
 411   * soc: qcom: Add support for SAW2 regulators
 412   * clk:gcc-msm8916: add missing mss_q6_bimc_axi clock
 413   * thermal: qcom: tsens: Add a skeletal TSENS drivers
 414   * thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
 415   * thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
 416   * thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
 417   * amba: Defer device peripheral ID read
 418   * coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID
 419   * i2c: qup: Change qup_wait_writeready function to use for all timeouts
 420   * qup: i2c: factor out common code for reuse
 421   * i2c: qup: Add V2 tags support
 422   * i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
 423   * i2c: qup: Add bam dma capabilities
 424   * i2c: qup: Remove verbose messages.
 425   * drm/msm/dsi: Parse lane swap information from DT
 426   * drm/msm/dsi: Add a delay when performing software reset
 427   * drm/msm/dsi: Remove incorrect warning on host attach
 428   * drm/msm/dsi: Don't call hpd helper unconditionally
 429   * HACK: drm/msm/mdp5: Make sure mdp5 clocks aren't disbaled when we need
 430     them
 431   * mdp4: Add iommu detach_dev in error path
 432   * drm/msm: remove pm_runtime_put() calls
 433   * drm/msm/dsi: Update the "vdd" voltage range
 434   * drm/msm/mdp5: Update bus scaling support
 435   * mmc: sdhci: let GPIO based card detection have higher precedence
 436   * mmc: sdhci-msm: Add SDHCI_QUIRK_NO_CARD_NO_RESET
 437   * soc: qcom: Introduce common SMEM state machine code
 438   * soc: qcom: smsm: Add driver for Qualcomm SMSM
 439   * soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
 440   * soc: qcom: enable smsm/smp2p modular build
 441   * ARM: qcom: select ARM_CPU_SUSPEND for power management
 442   * soc: qcom: Introduce WCNSS_CTRL SMD client
 443   * soc: qcom: smd-rpm: Add existing platform support
 444   * ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend
 445     hook
 446   * drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding it
 447   * regulator: qcom-smd: Add PM8916 support
 448   * regulator: qcom-smd: Add support for PMA8084
 449   * arm64: add qcom_defconfig
 450   * soc: qcom: smem: Add debugfs
 451   * remoteproc: core: Make the loaded resource table optional
 452   * remoteproc: qcom-pil: Implementation of Qualcomm TZ backed PIL
 453   * remoteproc: Add additional crash reasons
 454   * remoteproc: qcom-tz-pil: Add interrupts and gpio hooks
 455   * remoteproc: qcom-tz: Inform SMD about crashing remotes
 456   * remoteproc: qcom-tz: Finish shutdown on timeout
 457   * remoteproc: qcom: tz-pil: Round up max address
 458   * remoteproc: Support loading firmware from lately mounted fs (HACK)
 459   * remoteproc: qcom: q6v5 pil: Initial hack to boot mss
 460   * remoteproc: qcom-tz: Update to match smem api changes
 461   * remoteproc: qcom-tz: Update smem prototypes
 462   * remoteproc: qcom-tz: Drop smd reset stuff for now
 463   * remoteproc: qcom: Extract PAS and fix compilation for 4.1
 464   * remoteproc: qcom_tz_pil: Fix compiler issues
 465   * remoteproc: qcom_q6v5_pil: Fix 64 bit
 466   * regulator: qcom: smd: Regulator driver for the Qualcomm RPM
 467   * gpio: qcom-smsm: Add driver for Qualcomm SMSM
 468   * gpio: smsm: Update smem prototypes
 469   * gpio: smsm: Fix compiler warnings
 470   * soc: qcom: smd: Use correct smem id
 471   * gpio: qcom-smp2p: Qualcomm Shared Memory Point to Point
 472   * dt-binding: gpio: Introduce qcom,smp2p binding documentation
 473   * gpio: qcom-smp2p: Fix compile issues
 474   * remoteproc: tz_pil: Fixes to support 8916
 475   * HACK: soc: qcom: smd: Add debug to fix timing
 476   * regulator: smd: Add floor and corner operations
 477   * regulator: smd: Make set_{corner,floor} work with regulator struct
 478   * regulator: smd: Add correct ifdef flag for stubs
 479   * regulator: smd: remove left over debug statement
 480   * remoteproc: tz_pil: make irqs, smd edge & crash-reason optional
 481     properties
 482   * remoteproc: tz_pil: take relocation flag into account
 483   * remoteproc: tz_pil: skip waiting ready irq if it not provided
 484   * gpio:smp2p:qcom: kill set_irq_flags and use genirq
 485   * qcom-smd-rpm: Add MSM8916 support
 486   * soc: smd: Migrate the wifi driver from old smd driver to new smd
 487     driver.
 488   * soc: qcom: smd: Introduce callback setter
 489   * soc: qcom: smd: Split discovery and state change work
 490   * soc: qcom: smd: Refactor channel open and close handling
 491   * soc: qcom: smd: Support multiple channels per sdev
 492   * soc: qcom: smd: Support opening additional channels
 493   * WIP: remoteproc: q6: remove some commented out code
 494   * WIP:remoteproc:q6pil: add segment_is_loadable and
 495     segment_is_relocatable macros
 496   * WIP: remoteproc: q6: add support to memory-region
 497   * WIP: remoteproc: q6: add support to scm restart
 498   * WIP: remoteproc: HACK to get it working on  DB410c
 499   * remoteproc: tz: Allow no scm clocks support
 500   * soc: qcom: Add msm_bus driver
 501   * soc: qcom: rpm_log: Add rpm log driver
 502   * soc: qcom: Stub IPCRTR client driver
 503   * Fix: Make it buildable on v4.3
 504   * Move to new qcom_smem_get() api
 505   * PM / OPP: Support adjusting OPP voltages at runtime
 506   * OPP: Allow notifiers to call dev_pm_opp_get_{voltage, freq} RCU-free
 507   * cpufreq-dt: Handle OPP voltage adjust events
 508   * power: avs: Add support for CPR (Core Power Reduction)
 509   * power: avs: cpr: Use raw mem access for qfprom
 510   * power: avs: Register CPR with cpufreq-dt
 511   * power: avs: cpr: Fix Duplicate OPPs warning
 512   * pwer:avs: cpr: fix with new reg_sequence structures
 513   * cpufreq-dt: Add L2 frequency scaling support
 514   * firmware: qcom: scm: Add support for ARM64 SoCs
 515   * firmware: qcom: scm: Generalize shared error map
 516   * firmware: qcom: scm: Add boot APIs
 517   * firmware: qcom: scm: Peripheral Authentication Service
 518   * firmware: qcom: scm: Add 64 bit PAS APIs
 519   * firmware: qcom: scm: Fix NULL coherent device
 520   * firmware: qcom: scm: Split out 32-bit specific SCM code
 521   * firmware: qcom: scm: Support PIL SCMs
 522   * firmware: qcom: scm: Support IOMMU scm calls
 523   * firmware: qcom: scm: add video (vidc) scm calls
 524   * firmware: qcom: scm: Fixup arm64 asm
 525   * firmware: scm: add proc restart support
 526   * wcn36xx: add wcn3620 chip type definition
 527   * wcn36xx: get chip type from platform ops
 528   * wcn36xx: use 3680 dxe regs for 3620
 529   * wcn36xx: introduce WCN36XX_HAL_AVOID_FREQ_RANGE_IND
 530   * wcn36xx: swallow two wcn3620 IND messages
 531   * wcn36xx: remove powersaving for wcn3620
 532   * wcn36xx: handle new hal response format
 533   * wcn3620: use new response format for wcn3620 trigger_ba
 534   * wcn3620: use new response format for wcn3620 remove_bsskey
 535   * net wireless wcn36xx add wcnss platform code
 536   * net wireless wcn36xx adapt wcnss platform to select module by DT
 537   * wcn36xx: add later fw capabilities
 538   * Got workable wireless driver.
 539   * Set the dma mask for platform device which is not created from DT.
 540   * Update the initialization sequence to enable DB410c.
 541   * Migrate the wifi driver from old smd driver to new smd driver.
 542   * Bluetooth: Add HCI device identifier for Qualcomm SMD
 543   * Bluetooth: btqcomsmd: Qualcomm WCNSS HCI driver
 544   * wcn36xx: Update the smd client driver to use new smd channel
 545   * wcn36xx: eliminate the warning for unsupported SMD_EVENT
 546   * wcn36xx: avoid alloc mem with GFP_KERNEL in smd callback.
 547   * linaro: add defconfig fragment with basic linaro config
 548   * kernel: configs: move linaro distro.conf as proper %.config fragment
 549   * kernel: configs: update distro.config
 550   * kernel: configs: improve distro.config, mostly for systemd
 551   * kernel: configs: update distro config from release branch
 552   * kernel: configs: Enable input misc device drivers
 553   * media: vidc: debug: fix build warnings
 554   * media: vidc: venc/vdec: vb2 structure reorganisation
 555   * iommu: qcom: v1: move iommu-sec pgtable allocation
 556   * dts: arm: apq8064: add support to q6 pil via pil-tz
 557   * arm: dts: apq8064: add support to smd apr_audio svc channel
 558   * dts: arm: add support to digital audio via dsp
 559   * arm: dts: qcom: apq8064: Add RPMCC DT node
 560   * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
 561   * ARM: dts: ERAGON: fix uart pinctrl
 562   * dts: qcom: Add CoreSight components for APQ8064
 563   * arm: dts: apq8064: fix clock names according to new rpmcc
 564   * usb: phy: msm: fix error handling in probe.
 565   * usb: phy: msm: HACK: Make Vddc configuration optional
 566   * usb: phy: msm: Disable driver runtime PM
 567   * usb: phy: msm: Ensure that workers are initialized before use
 568   * usb: chipidea: msm: Use posted data writes on AHB
 569   * usb: host: ehci-msm: Use posted data writes on AHB
 570   * drivers: usb: Add bus scaling suppport
 571   * ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
 572   * ALSA: pcm: add IEC958 channel status helper for hw_params
 573   * sound: codec: Add support to msm8x16_wcd codec.
 574   * sound: qcom: add dsp support to apq8064
 575   * WIP: drm: msm: add proper hdmi codec driver.
 576   * ASoC: qcom: use correct device pointer in dma allocation
 577   * arm: dts: remove duplicate entires
 578   * cpufreq-dt: Add missing rcu_read_lock() for find_device_opp()
 579   * multi_v7_defconfig: add msm iommu kconfig
 580   * kernel: add DRM_LOAD_EDID_FIRMWARE in distro.config
 581   * kernel: configs: add I2C_CHARDEV in distro.config
 582   * kernel: configs: add CONFIG_INPUT_JOYDEV in distro.config
 583   * fixup! ARM: qcom_defconfig: Add QCOM specific drivers
 584   * wcn36xx: handle rx skb allocation failure to avoid system crash
 585   * wcn36xx: split DMA mask register writing.
 586   * wcn36xx: Clean up wcn36xx_smd_send_beacon
 587   * wcn36xx: Pad TIM PVM if needed
 588   * wcn36xx: Add helper macros to cast vif to private vif and vice versa
 589   * wcn36xx: Use consistent name for private vif
 590   * wcn36xx: Use define for invalid index and fix typo
 591   * wcn36xx: Fetch private sta data from sta entry instead of from vif
 592   * wcn36xx: Add helper macros to cast sta to priv
 593   * wcn36xx: Remove sta pointer in private vif struct
 594   * wcn36xx: Parse trigger_ba response properly
 595   * wcn36xx: Copy all members in config_sta v1 conversion
 596   * wcn36xx: Use allocated self sta index instead of hard coded
 597   * wcn36xx: Clear encrypt_type when deleting bss key
 598   * wcn36xx: Track association state
 599   * wcn36xx: Implement multicast filtering
 600   * wcn36xx: don't pad beacons for mesh
 601   * wcn36xx: Use correct command struct for EXIT_BMPS_REQ
 602   * wcn36xx: Disable power save for now
 603   * wcn36xx: remove references to IFF_PROMISC
 604
 605  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 04 Feb 2016 16:20:26 +0100
 606
 607 linux-snapdragon (4.2.0-2012.12) xenial; urgency=low
 608
 609   [ Tim Gardner ]
 610
 611   * [Config] renamed to snapdragon
 612   * Rebased on Ubuntu-4.2.0-25.30
 613
 614  -- Tim Gardner <tim.gardner@canonical.com>  Tue, 26 Jan 2016 15:04:16 -0700
 615
 616 linux-snapdragon (4.2.0-2011.11) xenial; urgency=low
 617
 618   [ Upstream Kernel Changes ]
 619
 620   * arm64: errata: Add -mpc-relative-literal-loads to erratum #843419 build
 621     flags
 622     - LP: #1533009
 623
 624  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 25 Jan 2016 11:51:37 +0100
 625
 626 linux-snapdragon (4.2.0-2010.10) xenial; urgency=low
 627
 628   [ Paolo Pisati ]
 629
 630   * [Config] DEBUG_MEMORY_INIT=y
 631   * [Config] DEBUG_MUTEXES=y && DEBUG_SPINLOCK=y
 632
 633  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 21 Jan 2016 09:30:55 +0100
 634
 635 linux-dragon410c (4.2.0-2009.9) xenial; urgency=low
 636
 637   [ Paolo Pisati ]
 638
 639   * [Config] USB_HSIC_USB3503=y
 640   * [Config] USB_MSM_OTG=y
 641   * [Config] USB_GADGET=y
 642   * [Config] USB_CHIPIDEA=y
 643
 644  -- Paolo Pisati <paolo.pisati@canonical.com>  Tue, 19 Jan 2016 11:39:28 +0100
 645
 646 linux-dragon410c (4.2.0-2008.8) xenial; urgency=low
 647
 648   [ Paolo Pisati ]
 649
 650   * rebased on Ubuntu-4.2.0-24.29
 651   * update Linaro BSP qcomlt-4.2 @ f1bd413
 652   * [Config] disable QCOM_[CPUFREQ|CPUIDLE], use the DT generic
 653   * [Config] BUS_TOPOLOGY_ADHOC=y
 654   * [Config] disable MMC_CLKGATE
 655   * [Config] MSM_BUS_SCALING=y
 656   * [Config] disable NO_HZ
 657   * [Config] disable PM_DEVFREQ
 658   * [Config] disable PM_WAKELOCKS
 659   * [Config] USB_OHCI_HCD_PLATFORM=y
 660   * [Config] disable USB_UHCI_HCD
 661   * [Config] disable USB_XHCI_HCD
 662
 663  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 18 Jan 2016 11:43:16 +0100
 664
 665 linux-dragon410c (4.2.0-2007.7) xenial; urgency=low
 666
 667   [ Paolo Pisati ]
 668
 669   * [Config] disable all arm64 SOCs but QCOM
 670   * [Config] REGULATOR_FAN53555=y
 671   * [Config] MMC_CLKGATE=y
 672   * [Config] USB_EHCI_HCD_PLATFORM=y && USB_EHCI_MSM=y
 673   * [Config] annotations: enable EHCI platform on arm64
 674   * [Config] DMA_CMA=y
 675   * [Config] I2C_QUP=y
 676   * [Config] HW_RANDOM_MSM=y && HW_RANDOM_TPM=y
 677   * [Config] INPUT_PM8941_PWRKEY=y
 678   * [Config] LEDS_GPIO=y && LEDS_TRIGGER*=y
 679   * [Config] AUTOFS4_FS=y
 680   * [Config] SPMI=y, REGULATOR_QCOM_SPMI=y, PINCTRL_QCOM_SPMI_PMIC
 681   * [Config] MMC_QCOM_DML=y
 682   * [Config] MSM_RPMCC_8064=y
 683   * [Config] QCOM_QFPROM=y && QCOM_TSENS=y
 684
 685  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 13 Jan 2016 21:56:58 +0100
 686
 687 linux-dragon410c (4.2.0-2006.6) xenial; urgency=low
 688
 689   [ Paolo Pisati ]
 690
 691   * [Config] NLS_ISO8859_1=y
 692
 693  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 15:51:22 +0100
 694
 695 linux-dragon410c (4.2.0-2005.5) xenial; urgency=low
 696
 697   [ Paolo Pisati ]
 698
 699   * Revert "[Config] FTBFS: disable ARM64_CRYPTO"
 700   * [Config] REGULATOR_FIXED_VOLTAGE=y
 701   * [Config] QCOM_A53=y
 702   * [Config] MFD_QCOM_RPM=y
 703   * [Config] MMC_SDHCI=y && MMC_SDHCI_MSM=y
 704   * [Config] PINCTRL_MSM8916=y
 705   * [Config] QCOM_BAM_DMA && QCOM_GSBI=y
 706   * [Config] REGULATOR_QCOM_RPM=y
 707   * [Config] MMC_BLOCK_MINORS=32
 708   * [Config] CRYPTO_DRBG=y
 709
 710  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 11:11:59 +0100
 711
 712 linux-dragon410c (4.2.0-2004.4) xenial; urgency=low
 713
 714   [ Paolo Pisati ]
 715
 716   * [Config] FTBFS: disable ARM64_CRYPTO
 717
 718  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 14:12:54 +0100
 719
 720 linux-dragon410c (4.2.0-2003.3) xenial; urgency=low
 721
 722   [ Paolo Pisati ]
 723
 724   * [Config] COMMON_CLK_QCOM=y && HWSPINLOCK_QCOM=y
 725   * [Config] QCOM_SMD=y (fix FTBFS SERIAL_MSM_SMD)
 726   * [Config] MFD_QCOM_SMD_RPM=y && REGULATOR_QCOM_SMD_RPM=y
 727   * [Config] VIDEO_V4L2=y
 728   * [Config] MSM_VIDC_V4L2=y
 729   * [Config] QCOM_Q6V5_PIL=y && QCOM_TZ_PIL=y
 730   * [Config] DRM_MSM=y && DRM_I2C_ADV7511=y
 731   * [Config] SND_SOC_QCOM=y
 732   * [Config] MSM_GCC_8916=y
 733   * [Config] DRM_PANEL_SIMPLE=y
 734
 735  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 11:33:29 +0100
 736
 737 linux-dragon410c (4.2.0-2002.2) xenial; urgency=low
 738
 739   [ Paolo Pisati ]
 740
 741   * [Config] snappy config fragments: generic, systemd, lxc, security and
 742     snappy
 743   * [Config] snappy/security: CC_STACKPROTECTOR_REGULAR=y
 744   * [Config] snappy/snappy: RFKILL_REGULATOR depends on REGULATOR=y
 745   * [Config] snappy/generic: CRASH_DUMP=y
 746   * [Config] snappy/generic: NVRAM=m
 747   * [Config] snappy/generic: INPUT_UINPUT=y
 748   * [Config] snappy/generic: SYSVIPC=y && SYSVIPC_SYSCTL=y
 749   * [Config] snappy/generic: LOCALVERSION= to avoid packaging failure
 750   * [Config] updateconfigs
 751
 752   [ Upstream Kernel Changes ]
 753
 754   * media: vidc: fix compile error
 755
 756  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 04 Dec 2015 15:24:16 +0100
 757
 758 linux-dragon410c (4.2.0-2001.1) xenial; urgency=low
 759
 760   [ Paolo Pisati ]
 761
 762   * import http://git.linaro.org/landing-teams/working/qualcomm/kernel.git @
 763     ubuntu-qcom-dragonboard410c-15.09
 764   * rebased on Ubuntu-4.2.0-19.23
 765
 766  --  Paolo Pisati <paolo.pisati@canonical.com>  Thu, 03 Dec 2015 17:18:07 +0200