debian.snapdragon/changelog

   1 linux-snapdragon (4.4.0-1005.5) xenial; urgency=low
   2
   3   [ Paolo Pisati ]
   4
   5   * SAUCE: dtb: add a custom apq8016 for snappy with sdhc_2's vmmc-supply
   6     disabled
   7
   8  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 19 Feb 2016 13:34:25 +0100
   9
  10 linux-snapdragon (4.4.0-1004.4) xenial; urgency=low
  11
  12   [ Paolo Pisati ]
  13
  14   * [Config] MMC_BLOCK_MINORS=32
  15
  16  -- Paolo Pisati <paolo.pisati@canonical.com>  Tue, 09 Feb 2016 10:27:30 +0100
  17
  18 linux-snapdragon (4.4.0-1003.3) xenial; urgency=low
  19
  20   [ Upstream Kernel Changes ]
  21
  22   * arm64: dts: qcom: fix typo in usb id pins
  23   * usb: phy: msm: Fix state machine worker logic for OTG mode.
  24
  25  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 05 Feb 2016 14:38:07 +0100
  26
  27 linux-snapdragon (4.4.0-1002.2) xenial; urgency=low
  28
  29   [ Paolo Pisati ]
  30
  31   * [Config] copy annotations from master
  32   * [Config] updateconfigs
  33   * [Config] better align config with qcomlt-4.4
  34   * [Config] FTBFS: disable DRM_PANEL_SIMPLE
  35
  36  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 04 Feb 2016 17:21:00 +0100
  37
  38 linux-snapdragon (4.4.0-1001.1) xenial; urgency=low
  39
  40   [ Paolo Pisati ]
  41
  42   * Imported http://git.linaro.org/landing-teams/working/qualcomm/kernel.git - qcomlt-4.4 @ 17a6dbb
  43   * Rebased on Ubuntu-4.4.0-2.16
  44
  45   [ Upstream Kernel Changes ]
  46
  47   * mmc: mmci: Support any block sizes for ux500v2 and qcom variant
  48   * hid: add support for Lilliput touchscreen
  49   * ARM: qcom_defconfig: Add QCOM specific drivers
  50   * arm:multi_v7_defconfig: Add QCOM specific Kconfigs
  51   * WIP:pwrseq: Convert in to proper platform device
  52   * iommu:msm: fix compilation error.
  53   * Input: pm8941: Add RESIN_N input handling
  54   * media: v4l2-controls: add h264 5.2 level and constrained high profile
  55   * media: vidc: Qualcomm video encoder/decoder driver
  56   * PCI: designware: add memory barrier after enabling region
  57   * DT: PCI: qcom: Document PCIe devicetree bindings
  58   * PCI: qcom: Add Qualcomm PCIe controller driver
  59   * drm/edid: Add support to get edid early
  60   * drm/edid: export edid_vendor()
  61   * drm/panel: simple-panel: Add panel picker support.
  62   * drm/msm: mdp4 lvds: continue if the panel is not connected
  63   * drm/msm: mdp4 lvds: Check the panel node in detect_panel()
  64   * devicetree: Add hardware rng entry to qcom-apq8064.dtsi
  65   * ARM: dts: qcom: apq8064: Add hwmutex and SMEM nodes
  66   * ARM: dts: qcom: apq8064: Declare all pm8921 regulators
  67   * ARM: dts: qcom: apq8064: Introduce gsbi5 and gsbi5 serial node
  68   * arm: dts: qcom: Add generic PMIC gpio/MPP compat strings
  69   * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
  70   * ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6
  71   * ARM: dts: apq8064: add pcie devicetree node
  72   * ARM: dts: ifc6410: enable pcie dt node for this board
  73   * ARM: dts: apq8064: Add MDP support
  74   * ARM: dts: ifc6410: enable MDP support
  75   * ARM: dts: qs600: enable MDP support
  76   * ARM: dts: ifc6410: add inforce LVDS panel support
  77   * ARM: dts: APQ8064: Add iommu
  78   * ARM: dts: apq8064: add pci support in CM QS600
  79   * ARM: dts: qcom: Add necessary DT data for Krait cpufreq
  80   * ARM: qcom: add description of KPSS WDT for APQ8064
  81   * ARM: dts: apq8064: Assign a power supply to each CPU
  82   * ARM: dts: apq8064: Add OPP data for frequencies above 1ghz
  83   * ARM: dts: apq8064: Add thermal cooling maps
  84   * ARM: dts: apq8064: Add voltage ranges of the SAW2 regulators
  85   * ARM: dts: apq8064: Add reference to the L2 clock
  86   * ARM: dts: apq8064: Add a DT node for the L2 data
  87   * ARM: dts: apq8064: Add ADM configuration node
  88   * arm: dts: Added eInfochips ERAGON600 board support
  89   * ARM: dts: ifc6410: HACK add bt reset gpios to pwrseq
  90   * ARM: dts: apq8064: Increase critical temperature to 110C
  91   * arm: dts: apq8064: Add thermal zones, tsens and qfprom nodes
  92   * arm64: dts: qcom: 8x16: UART1 add CTS_N, RTS_N pin configurations
  93   * arm64: dts: qcom: 8x16: UART1 and UART2 use DMA for RX and TX
  94   * arm64: dts: qcom: Make msm8916-mtp compatible string compliant
  95   * arm64: dts: qcom: Alias pm8916 on msm8916 devices
  96   * arm64: dts: qcom: msm8916: Add fixed rate on-board oscillators
  97   * arm64: dts: fix the i2c aliasing to match to schematics.
  98   * arm64: dts: set the default i2c pin drive strength to 16mA
  99   * arm64: dts: qcom: Add MSM8916 SMEM nodes
 100   * arm64: dts: qcom: Add RPM/SMD support on MSM8916
 101   * arm64: dts: Add PM8916 support on MSM8916
 102   * arm64: dts: qcom: Add pm8994, pmi8994, pm8004 PMIC skeletons
 103   * arm64: dts: qcom: Add pm8994 gpios and MPPs
 104   * arm64: dts: apq8016-sbc: enable UART0 on LS connector
 105   * arm64: dts: apq8016-sbc: add label properties for UART, I2C, and SPI
 106   * devicetree: bindings: Document qcom,msm-id and qcom,board-id
 107   * arm64: dts: Add Qualcomm MSM8916 & MTP8916 ids
 108   * DT: arm64: msm8916-mtp: enable spi3
 109   * arm64: dts: qcom: Add APQ8016 SBC support
 110   * arm64: dts: qcom: Add USB related device nodes on APQ8016 SBC board
 111   * arm64: dts: qcom: Add sdhci support for APQ8016 SBC board
 112   * arm64: dts: Add nodes we need for SMP boot
 113   * ARM: dts: Enable SD card (disable vmcc)
 114   * arm64: msm8916 dtsi: Add mdss support
 115   * arm64: sb8016: Add ADV7533 bridge in sbc8016 dtsi
 116   * arm64: dts: Add apq8016-sbc hdmi audio support
 117   * arm64: dts: qcom: apq8016-sbc: Don't hog client driver pins
 118   * arm64: dts: qcom: Fix apq8016-sbc board USB related pin definitions
 119   * arm64: dts: qcom: apq8016-sbc: add D+/D- route switch GPIO
 120   * arm64: dts: qcom: apq8016-sbc: Fix sdhci pinctrl default state name
 121   * arm64: dts: qcom: apq8016-sbc: Enable SD card slot
 122   * arm64: dts: qcom: Fix MPP's function used for LED control
 123   * arm64: dts: qcom: Enable USB manual pullup on msm8916
 124   * arm64: dts: qcom: msm8916: Add RPMCC DT node
 125   * arm64: dts: qcom: msm8916: Add A53 DT node
 126   * arm64: dts: Add cpufreq-dt support for msm8916
 127   * arm64: dts: Add clock-latency for msm8916
 128   * arm64: dts: Add CPR DT node for msm8916
 129   * arm64: dts: Add cpu-supply properties for cpufreq
 130   * arm: dts: msm8974: Add thermal zones, tsens and eeprom nodes
 131   * arm: dts: apq8084: Add thermal zones, tsens and eeprom nodes
 132   * arm64: dts: msm8916: Add thermal zones, tsens and eeprom nodes
 133   * arm64: dts: Add spmi-regulator nodes for pm8916
 134   * arm64: dts: msm8916: Add cpu cooling maps
 135   * WIP: dt: add support for gpu on msm8916/apq8016
 136   * DT: arm64: add iommu dtsi files
 137   * arm64: dt: Add WCNSS related nodes
 138   * dts: arm64: apq8016-sbc: enable LS 1.8v regulator by default
 139   * ARM64: dts: Fix the missing usb otg regulators.
 140   * arm64: dts: Fix memory region descriptions
 141   * arm64: dts: msm8916: add wcd codec support
 142   * arm64: dts: add support to analog audio playback
 143   * arm64: dts: qcom: 8x16: Add fixed rate on-board XO oscillator
 144   * arm64: dts: qcom: Add msm8916 CoreSight components
 145   * dts: qcom: Add CoreSight components for MSM8916
 146   * arm64: dts: Fix the hypervisor and tz memory region size
 147   * arm64: dts: remove the #if 0 around bluetooth
 148   * wcn36xx: Update DT to support wcn36xx wifi driver
 149   * WIP:dts: arm64: add q6v5 pil support
 150   * arm64: dt: Add msm bus nodes
 151   * arm64: dts: usb: Add bus scaling suppport
 152   * arm64: dts: Add rpm_log support
 153   * dts: arm64: msm8916: add vidc dt nodes
 154   * dts: arm64: qcom: apq8016-sbc: enable vidc and vidc-rproc
 155   * arm64: apq8016-sbc.dtsi: Add regulators needed by adv7533
 156   * arm64: msm8916-mdss.dtsi: Add bus scaling properties for mdp
 157   * arm64: dts: Align msm8916 cpu thermal trip point ranges
 158   * arm64: dts: qcom: apq8016-sbc: Add Volume Up key device node
 159   * arm64: dts: qcom: apq8016-sbc: Add Volume Down definitions
 160   * arm64: dts: qcom: apq8016-sbc: Limit MPP4 high state to 1.8V
 161   * arm64: dts: apq8016-sbc: add regulators support
 162   * arm64: dts: move smem node after the soc node
 163   * arm64: dts: add spmi prefix to regulators
 164   * WIP: update iommu header
 165   * soc: qcom: import socinfo.h
 166   * iommu: qcom: forward port iommu v1
 167   * iommu: qcom: v1: rework secure part and build
 168   * iommu: qcom: v1: fix wrong sg interator
 169   * iommu: msm: Invalidate properly from iommu_unmap
 170   * arm64: provide dma cache routines with same API as 32 bit
 171   * qcom: iommu: Make use of domain_alloc and domain_free
 172   * DOWNSTREAM: drm/msm: use downstream iommu
 173   * iommu/msm: Add DT adaptation
 174   * iommu/msm: Move the contents from msm_iommu_dev.c to msm_iommu.c
 175   * iommu/msm: Add support for generic master bindings
 176   * iommu/msm: Set cacheability attributes without tex remap
 177   * temp: Add dummy msm_iommu_get_ctx and fix broken build
 178   * arm: dma-mapping: Don't override dma_ops in arch_setup_dma_ops()
 179   * of: dma: Move range size workaround to of_dma_get_range()
 180   * of: dma: Make of_dma_deconfigure() public
 181   * of: dma: Split of_configure_dma() into mask and ops configuration
 182   * drivers: platform: Configure dma operations at probe time
 183   * iommu: of: Document the of_iommu_configure() function
 184   * iommu: of: Handle IOMMU lookup failure with deferred probing or error
 185   * drm/msm: temp: Add a check to be compatible against both iommuv0/v1
 186   * iommu/msm: Fix "scheduling while atomic" bug
 187   * pci: use new of_dma_configure* apis
 188   * dt/bindings: qcom_adm: Fix channel specifiers
 189   * dmaengine: Add ADM driver
 190   * dmaengine: adm: Fix ADM hardware descriptor creation when flow control
 191     is enabled
 192   * dmaengine: adm: Use 'soft' flush when stopping DMA
 193   * dmaengine: adm: Don't reset controller during probe
 194   * dmaengine: adm: Start next DMA even if there is no ongoing transaction
 195   * ARM: cpuidle: Add cpuidle support for QCOM cpus
 196   * arm64: defconfig: qcom: Enable restart driver
 197   * arm64: introduce CPU_OF_TABLES for cpu ops selection
 198   * arm64: smp: move the pen to a header file
 199   * arm64: qcom: add cpu operations
 200   * arm64: defconfig: add qcom specifics
 201   * common: DMA-mapping: Add strongly ordered memory attribute
 202   * arm: Add option to skip buffer zeroing
 203   * arm64: Add support for DMA_ATTR_STRONGLY_ORDERED
 204   * arm64: dma-mapping: add support for IOMMU mapper
 205   * arm64: mm: Fix a bug in iommu dma-mapping
 206   * arm64: dma-mapping: fix DMA_ATTR_STRONGLY_ORDERED in __get_dma_pgprot
 207   * arm64: dma-mapping: map sg lists into the SMMU as virtually contiguous
 208   * arm64: fixup for mm renames
 209   * drm/mipi_dsi: refactor device creation
 210   * drm/mipi_dsi: check for used channels
 211   * drm/mipi_dsi: Create dummy DSI devices
 212   * drm/mipi_dsi: Get DSI host by DT device node
 213   * drm/i2c: adv7511: Fix mutex deadlock when interrupts are disabled
 214   * drm/i2c: adv7511: Initial support for adv7533
 215   * drm/i2c: adv7511: Refactor encoder slave functions
 216   * drm/i2c: adv7511: Add drm_bridge/connector for ADV7533
 217   * drm/i2c: adv7511: Create mipi_dsi_device for ADV7533
 218   * drm/i2c: adv7511: setup CEC registers during power off-power-on
 219     sequence
 220   * drm/i2c: adv7511: Use internal timing generator
 221   * drm/i2c: adv7511: Change DSI lanes dynamically
 222   * drm/i2c: adv7511: Move the common data structures to header file
 223   * drm/i2c: adv7511: Add Audio support.
 224   * drm/i2c: adv7511: Enable the audio data and clock pads on adv7533
 225   * HACK: drm/i2c: adv7511: Remove hotplug event handling
 226   * drm/i2c: adv7511: move to use reg_sequence
 227   * drm/i2c: adv7511: fixup the dapm bias level access
 228   * drm/i2c: adv7511: Init regulators
 229   * clk: qcom: gdsc: Use PM clocks to control gdsc clocks
 230   * clk: qcom: gdsc: Enable an RCG before turing on the gdsc
 231   * clk: qcom: gdsc: Manage clocks with !CONFIG_PM
 232   * clk: qcom: common: Add API to register board clocks backwards
 233     compatibly
 234   * clk: qcom: Move cxo/pxo/xo into dt files
 235   * clk: qcom: msm8916: Move xo and sleep clocks into DT
 236   * ARM: Add Krait L2 register accessor functions
 237   * clk: Avoid sending high rates to downstream clocks during set_rate
 238   * clk: mux: Split out register accessors for reuse
 239   * clk: Add safe switch hook
 240   * clk: qcom: Add support for High-Frequency PLLs (HFPLLs)
 241   * clk: qcom: Add HFPLL driver
 242   * clk: qcom: Add MSM8960/APQ8064's HFPLLs
 243   * clk: qcom: Add IPQ806X's HFPLLs
 244   * clk: qcom: Add support for Krait clocks
 245   * clk: qcom: Add KPSS ACC/GCC driver
 246   * clk: qcom: Add Krait clock controller driver
 247   * cpufreq: Add module to register cpufreq on Krait CPUs
 248   * clk: qcom: Add support for SMD-RPM Clocks
 249   * clk: qcom: Add support for RPM Clocks
 250   * clk: qcom: Add support for msm8974 RPM-SMD clocks
 251   * clk: qcom: msm8974: Remove gfx3d clock from MMCC
 252   * clk: qcom: Add support for apq8084 RPM-SMD clocks
 253   * clk: qcom: Add support for regmap mux-div clocks
 254   * clk: qcom: Add A53 clock driver
 255   * soc: qcom: Add support for SAW2 regulators
 256   * clk:gcc-msm8916: add missing mss_q6_bimc_axi clock
 257   * thermal: qcom: tsens: Add a skeletal TSENS drivers
 258   * thermal: qcom: tsens-8916: Add support for 8916 family of SoCs
 259   * thermal: qcom: tsens-8974: Add support for 8974 family of SoCs
 260   * thermal: qcom: tsens-8960: Add support for 8960 family of SoCs
 261   * amba: Defer device peripheral ID read
 262   * coresight-etm3x: Add Qualcomm PTM v1.1 peripheral ID
 263   * i2c: qup: Change qup_wait_writeready function to use for all timeouts
 264   * qup: i2c: factor out common code for reuse
 265   * i2c: qup: Add V2 tags support
 266   * i2c: qup: Transfer each i2c_msg in i2c_msgs without a stop bit
 267   * i2c: qup: Add bam dma capabilities
 268   * i2c: qup: Remove verbose messages.
 269   * drm/msm/dsi: Parse lane swap information from DT
 270   * drm/msm/dsi: Add a delay when performing software reset
 271   * drm/msm/dsi: Remove incorrect warning on host attach
 272   * drm/msm/dsi: Don't call hpd helper unconditionally
 273   * HACK: drm/msm/mdp5: Make sure mdp5 clocks aren't disbaled when we need
 274     them
 275   * mdp4: Add iommu detach_dev in error path
 276   * drm/msm: remove pm_runtime_put() calls
 277   * drm/msm/dsi: Update the "vdd" voltage range
 278   * drm/msm/mdp5: Update bus scaling support
 279   * mmc: sdhci: let GPIO based card detection have higher precedence
 280   * mmc: sdhci-msm: Add SDHCI_QUIRK_NO_CARD_NO_RESET
 281   * soc: qcom: Introduce common SMEM state machine code
 282   * soc: qcom: smsm: Add driver for Qualcomm SMSM
 283   * soc: qcom: smp2p: Qualcomm Shared Memory Point to Point
 284   * soc: qcom: enable smsm/smp2p modular build
 285   * ARM: qcom: select ARM_CPU_SUSPEND for power management
 286   * soc: qcom: Introduce WCNSS_CTRL SMD client
 287   * soc: qcom: smd-rpm: Add existing platform support
 288   * ARM: 8485/1: cpuidle: remove cpu parameter from the cpuidle_ops suspend
 289     hook
 290   * drivers/soc/qcom/smd.c: use __ioread32_copy() instead of open-coding it
 291   * regulator: qcom-smd: Add PM8916 support
 292   * regulator: qcom-smd: Add support for PMA8084
 293   * arm64: add qcom_defconfig
 294   * soc: qcom: smem: Add debugfs
 295   * remoteproc: core: Make the loaded resource table optional
 296   * remoteproc: qcom-pil: Implementation of Qualcomm TZ backed PIL
 297   * remoteproc: Add additional crash reasons
 298   * remoteproc: qcom-tz-pil: Add interrupts and gpio hooks
 299   * remoteproc: qcom-tz: Inform SMD about crashing remotes
 300   * remoteproc: qcom-tz: Finish shutdown on timeout
 301   * remoteproc: qcom: tz-pil: Round up max address
 302   * remoteproc: Support loading firmware from lately mounted fs (HACK)
 303   * remoteproc: qcom: q6v5 pil: Initial hack to boot mss
 304   * remoteproc: qcom-tz: Update to match smem api changes
 305   * remoteproc: qcom-tz: Update smem prototypes
 306   * remoteproc: qcom-tz: Drop smd reset stuff for now
 307   * remoteproc: qcom: Extract PAS and fix compilation for 4.1
 308   * remoteproc: qcom_tz_pil: Fix compiler issues
 309   * remoteproc: qcom_q6v5_pil: Fix 64 bit
 310   * regulator: qcom: smd: Regulator driver for the Qualcomm RPM
 311   * gpio: qcom-smsm: Add driver for Qualcomm SMSM
 312   * gpio: smsm: Update smem prototypes
 313   * gpio: smsm: Fix compiler warnings
 314   * soc: qcom: smd: Use correct smem id
 315   * gpio: qcom-smp2p: Qualcomm Shared Memory Point to Point
 316   * dt-binding: gpio: Introduce qcom,smp2p binding documentation
 317   * gpio: qcom-smp2p: Fix compile issues
 318   * remoteproc: tz_pil: Fixes to support 8916
 319   * HACK: soc: qcom: smd: Add debug to fix timing
 320   * regulator: smd: Add floor and corner operations
 321   * regulator: smd: Make set_{corner,floor} work with regulator struct
 322   * regulator: smd: Add correct ifdef flag for stubs
 323   * regulator: smd: remove left over debug statement
 324   * remoteproc: tz_pil: make irqs, smd edge & crash-reason optional
 325     properties
 326   * remoteproc: tz_pil: take relocation flag into account
 327   * remoteproc: tz_pil: skip waiting ready irq if it not provided
 328   * gpio:smp2p:qcom: kill set_irq_flags and use genirq
 329   * qcom-smd-rpm: Add MSM8916 support
 330   * soc: smd: Migrate the wifi driver from old smd driver to new smd
 331     driver.
 332   * soc: qcom: smd: Introduce callback setter
 333   * soc: qcom: smd: Split discovery and state change work
 334   * soc: qcom: smd: Refactor channel open and close handling
 335   * soc: qcom: smd: Support multiple channels per sdev
 336   * soc: qcom: smd: Support opening additional channels
 337   * WIP: remoteproc: q6: remove some commented out code
 338   * WIP:remoteproc:q6pil: add segment_is_loadable and
 339     segment_is_relocatable macros
 340   * WIP: remoteproc: q6: add support to memory-region
 341   * WIP: remoteproc: q6: add support to scm restart
 342   * WIP: remoteproc: HACK to get it working on  DB410c
 343   * remoteproc: tz: Allow no scm clocks support
 344   * soc: qcom: Add msm_bus driver
 345   * soc: qcom: rpm_log: Add rpm log driver
 346   * soc: qcom: Stub IPCRTR client driver
 347   * Fix: Make it buildable on v4.3
 348   * Move to new qcom_smem_get() api
 349   * PM / OPP: Support adjusting OPP voltages at runtime
 350   * OPP: Allow notifiers to call dev_pm_opp_get_{voltage, freq} RCU-free
 351   * cpufreq-dt: Handle OPP voltage adjust events
 352   * power: avs: Add support for CPR (Core Power Reduction)
 353   * power: avs: cpr: Use raw mem access for qfprom
 354   * power: avs: Register CPR with cpufreq-dt
 355   * power: avs: cpr: Fix Duplicate OPPs warning
 356   * pwer:avs: cpr: fix with new reg_sequence structures
 357   * cpufreq-dt: Add L2 frequency scaling support
 358   * firmware: qcom: scm: Add support for ARM64 SoCs
 359   * firmware: qcom: scm: Generalize shared error map
 360   * firmware: qcom: scm: Add boot APIs
 361   * firmware: qcom: scm: Peripheral Authentication Service
 362   * firmware: qcom: scm: Add 64 bit PAS APIs
 363   * firmware: qcom: scm: Fix NULL coherent device
 364   * firmware: qcom: scm: Split out 32-bit specific SCM code
 365   * firmware: qcom: scm: Support PIL SCMs
 366   * firmware: qcom: scm: Support IOMMU scm calls
 367   * firmware: qcom: scm: add video (vidc) scm calls
 368   * firmware: qcom: scm: Fixup arm64 asm
 369   * firmware: scm: add proc restart support
 370   * wcn36xx: add wcn3620 chip type definition
 371   * wcn36xx: get chip type from platform ops
 372   * wcn36xx: use 3680 dxe regs for 3620
 373   * wcn36xx: introduce WCN36XX_HAL_AVOID_FREQ_RANGE_IND
 374   * wcn36xx: swallow two wcn3620 IND messages
 375   * wcn36xx: remove powersaving for wcn3620
 376   * wcn36xx: handle new hal response format
 377   * wcn3620: use new response format for wcn3620 trigger_ba
 378   * wcn3620: use new response format for wcn3620 remove_bsskey
 379   * net wireless wcn36xx add wcnss platform code
 380   * net wireless wcn36xx adapt wcnss platform to select module by DT
 381   * wcn36xx: add later fw capabilities
 382   * Got workable wireless driver.
 383   * Set the dma mask for platform device which is not created from DT.
 384   * Update the initialization sequence to enable DB410c.
 385   * Migrate the wifi driver from old smd driver to new smd driver.
 386   * Bluetooth: Add HCI device identifier for Qualcomm SMD
 387   * Bluetooth: btqcomsmd: Qualcomm WCNSS HCI driver
 388   * wcn36xx: Update the smd client driver to use new smd channel
 389   * wcn36xx: eliminate the warning for unsupported SMD_EVENT
 390   * wcn36xx: avoid alloc mem with GFP_KERNEL in smd callback.
 391   * linaro: add defconfig fragment with basic linaro config
 392   * kernel: configs: move linaro distro.conf as proper %.config fragment
 393   * kernel: configs: update distro.config
 394   * kernel: configs: improve distro.config, mostly for systemd
 395   * kernel: configs: update distro config from release branch
 396   * kernel: configs: Enable input misc device drivers
 397   * media: vidc: debug: fix build warnings
 398   * media: vidc: venc/vdec: vb2 structure reorganisation
 399   * iommu: qcom: v1: move iommu-sec pgtable allocation
 400   * dts: arm: apq8064: add support to q6 pil via pil-tz
 401   * arm: dts: apq8064: add support to smd apr_audio svc channel
 402   * dts: arm: add support to digital audio via dsp
 403   * arm: dts: qcom: apq8064: Add RPMCC DT node
 404   * arm: dts: qcom: apq8064: Add fixed rate on-board oscillators
 405   * ARM: dts: ERAGON: fix uart pinctrl
 406   * dts: qcom: Add CoreSight components for APQ8064
 407   * arm: dts: apq8064: fix clock names according to new rpmcc
 408   * usb: phy: msm: fix error handling in probe.
 409   * usb: phy: msm: HACK: Make Vddc configuration optional
 410   * usb: phy: msm: Disable driver runtime PM
 411   * usb: phy: msm: Ensure that workers are initialized before use
 412   * usb: chipidea: msm: Use posted data writes on AHB
 413   * usb: host: ehci-msm: Use posted data writes on AHB
 414   * drivers: usb: Add bus scaling suppport
 415   * ASoC: hdmi-codec: Add hdmi-codec for external HDMI-encoders
 416   * ALSA: pcm: add IEC958 channel status helper for hw_params
 417   * sound: codec: Add support to msm8x16_wcd codec.
 418   * sound: qcom: add dsp support to apq8064
 419   * WIP: drm: msm: add proper hdmi codec driver.
 420   * ASoC: qcom: use correct device pointer in dma allocation
 421   * arm: dts: remove duplicate entires
 422   * cpufreq-dt: Add missing rcu_read_lock() for find_device_opp()
 423   * multi_v7_defconfig: add msm iommu kconfig
 424   * kernel: add DRM_LOAD_EDID_FIRMWARE in distro.config
 425   * kernel: configs: add I2C_CHARDEV in distro.config
 426   * kernel: configs: add CONFIG_INPUT_JOYDEV in distro.config
 427   * fixup! ARM: qcom_defconfig: Add QCOM specific drivers
 428   * wcn36xx: handle rx skb allocation failure to avoid system crash
 429   * wcn36xx: split DMA mask register writing.
 430   * wcn36xx: Clean up wcn36xx_smd_send_beacon
 431   * wcn36xx: Pad TIM PVM if needed
 432   * wcn36xx: Add helper macros to cast vif to private vif and vice versa
 433   * wcn36xx: Use consistent name for private vif
 434   * wcn36xx: Use define for invalid index and fix typo
 435   * wcn36xx: Fetch private sta data from sta entry instead of from vif
 436   * wcn36xx: Add helper macros to cast sta to priv
 437   * wcn36xx: Remove sta pointer in private vif struct
 438   * wcn36xx: Parse trigger_ba response properly
 439   * wcn36xx: Copy all members in config_sta v1 conversion
 440   * wcn36xx: Use allocated self sta index instead of hard coded
 441   * wcn36xx: Clear encrypt_type when deleting bss key
 442   * wcn36xx: Track association state
 443   * wcn36xx: Implement multicast filtering
 444   * wcn36xx: don't pad beacons for mesh
 445   * wcn36xx: Use correct command struct for EXIT_BMPS_REQ
 446   * wcn36xx: Disable power save for now
 447   * wcn36xx: remove references to IFF_PROMISC
 448
 449  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 04 Feb 2016 16:20:26 +0100
 450
 451 linux-snapdragon (4.2.0-2012.12) xenial; urgency=low
 452
 453   [ Tim Gardner ]
 454
 455   * [Config] renamed to snapdragon
 456   * Rebased on Ubuntu-4.2.0-25.30
 457
 458  -- Tim Gardner <tim.gardner@canonical.com>  Tue, 26 Jan 2016 15:04:16 -0700
 459
 460 linux-snapdragon (4.2.0-2011.11) xenial; urgency=low
 461
 462   [ Upstream Kernel Changes ]
 463
 464   * arm64: errata: Add -mpc-relative-literal-loads to erratum #843419 build
 465     flags
 466     - LP: #1533009
 467
 468  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 25 Jan 2016 11:51:37 +0100
 469
 470 linux-snapdragon (4.2.0-2010.10) xenial; urgency=low
 471
 472   [ Paolo Pisati ]
 473
 474   * [Config] DEBUG_MEMORY_INIT=y
 475   * [Config] DEBUG_MUTEXES=y && DEBUG_SPINLOCK=y
 476
 477  -- Paolo Pisati <paolo.pisati@canonical.com>  Thu, 21 Jan 2016 09:30:55 +0100
 478
 479 linux-dragon410c (4.2.0-2009.9) xenial; urgency=low
 480
 481   [ Paolo Pisati ]
 482
 483   * [Config] USB_HSIC_USB3503=y
 484   * [Config] USB_MSM_OTG=y
 485   * [Config] USB_GADGET=y
 486   * [Config] USB_CHIPIDEA=y
 487
 488  -- Paolo Pisati <paolo.pisati@canonical.com>  Tue, 19 Jan 2016 11:39:28 +0100
 489
 490 linux-dragon410c (4.2.0-2008.8) xenial; urgency=low
 491
 492   [ Paolo Pisati ]
 493
 494   * rebased on Ubuntu-4.2.0-24.29
 495   * update Linaro BSP qcomlt-4.2 @ f1bd413
 496   * [Config] disable QCOM_[CPUFREQ|CPUIDLE], use the DT generic
 497   * [Config] BUS_TOPOLOGY_ADHOC=y
 498   * [Config] disable MMC_CLKGATE
 499   * [Config] MSM_BUS_SCALING=y
 500   * [Config] disable NO_HZ
 501   * [Config] disable PM_DEVFREQ
 502   * [Config] disable PM_WAKELOCKS
 503   * [Config] USB_OHCI_HCD_PLATFORM=y
 504   * [Config] disable USB_UHCI_HCD
 505   * [Config] disable USB_XHCI_HCD
 506
 507  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 18 Jan 2016 11:43:16 +0100
 508
 509 linux-dragon410c (4.2.0-2007.7) xenial; urgency=low
 510
 511   [ Paolo Pisati ]
 512
 513   * [Config] disable all arm64 SOCs but QCOM
 514   * [Config] REGULATOR_FAN53555=y
 515   * [Config] MMC_CLKGATE=y
 516   * [Config] USB_EHCI_HCD_PLATFORM=y && USB_EHCI_MSM=y
 517   * [Config] annotations: enable EHCI platform on arm64
 518   * [Config] DMA_CMA=y
 519   * [Config] I2C_QUP=y
 520   * [Config] HW_RANDOM_MSM=y && HW_RANDOM_TPM=y
 521   * [Config] INPUT_PM8941_PWRKEY=y
 522   * [Config] LEDS_GPIO=y && LEDS_TRIGGER*=y
 523   * [Config] AUTOFS4_FS=y
 524   * [Config] SPMI=y, REGULATOR_QCOM_SPMI=y, PINCTRL_QCOM_SPMI_PMIC
 525   * [Config] MMC_QCOM_DML=y
 526   * [Config] MSM_RPMCC_8064=y
 527   * [Config] QCOM_QFPROM=y && QCOM_TSENS=y
 528
 529  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 13 Jan 2016 21:56:58 +0100
 530
 531 linux-dragon410c (4.2.0-2006.6) xenial; urgency=low
 532
 533   [ Paolo Pisati ]
 534
 535   * [Config] NLS_ISO8859_1=y
 536
 537  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 15:51:22 +0100
 538
 539 linux-dragon410c (4.2.0-2005.5) xenial; urgency=low
 540
 541   [ Paolo Pisati ]
 542
 543   * Revert "[Config] FTBFS: disable ARM64_CRYPTO"
 544   * [Config] REGULATOR_FIXED_VOLTAGE=y
 545   * [Config] QCOM_A53=y
 546   * [Config] MFD_QCOM_RPM=y
 547   * [Config] MMC_SDHCI=y && MMC_SDHCI_MSM=y
 548   * [Config] PINCTRL_MSM8916=y
 549   * [Config] QCOM_BAM_DMA && QCOM_GSBI=y
 550   * [Config] REGULATOR_QCOM_RPM=y
 551   * [Config] MMC_BLOCK_MINORS=32
 552   * [Config] CRYPTO_DRBG=y
 553
 554  -- Paolo Pisati <paolo.pisati@canonical.com>  Mon, 04 Jan 2016 11:11:59 +0100
 555
 556 linux-dragon410c (4.2.0-2004.4) xenial; urgency=low
 557
 558   [ Paolo Pisati ]
 559
 560   * [Config] FTBFS: disable ARM64_CRYPTO
 561
 562  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 14:12:54 +0100
 563
 564 linux-dragon410c (4.2.0-2003.3) xenial; urgency=low
 565
 566   [ Paolo Pisati ]
 567
 568   * [Config] COMMON_CLK_QCOM=y && HWSPINLOCK_QCOM=y
 569   * [Config] QCOM_SMD=y (fix FTBFS SERIAL_MSM_SMD)
 570   * [Config] MFD_QCOM_SMD_RPM=y && REGULATOR_QCOM_SMD_RPM=y
 571   * [Config] VIDEO_V4L2=y
 572   * [Config] MSM_VIDC_V4L2=y
 573   * [Config] QCOM_Q6V5_PIL=y && QCOM_TZ_PIL=y
 574   * [Config] DRM_MSM=y && DRM_I2C_ADV7511=y
 575   * [Config] SND_SOC_QCOM=y
 576   * [Config] MSM_GCC_8916=y
 577   * [Config] DRM_PANEL_SIMPLE=y
 578
 579  -- Paolo Pisati <paolo.pisati@canonical.com>  Wed, 09 Dec 2015 11:33:29 +0100
 580
 581 linux-dragon410c (4.2.0-2002.2) xenial; urgency=low
 582
 583   [ Paolo Pisati ]
 584
 585   * [Config] snappy config fragments: generic, systemd, lxc, security and
 586     snappy
 587   * [Config] snappy/security: CC_STACKPROTECTOR_REGULAR=y
 588   * [Config] snappy/snappy: RFKILL_REGULATOR depends on REGULATOR=y
 589   * [Config] snappy/generic: CRASH_DUMP=y
 590   * [Config] snappy/generic: NVRAM=m
 591   * [Config] snappy/generic: INPUT_UINPUT=y
 592   * [Config] snappy/generic: SYSVIPC=y && SYSVIPC_SYSCTL=y
 593   * [Config] snappy/generic: LOCALVERSION= to avoid packaging failure
 594   * [Config] updateconfigs
 595
 596   [ Upstream Kernel Changes ]
 597
 598   * media: vidc: fix compile error
 599
 600  -- Paolo Pisati <paolo.pisati@canonical.com>  Fri, 04 Dec 2015 15:24:16 +0100
 601
 602 linux-dragon410c (4.2.0-2001.1) xenial; urgency=low
 603
 604   [ Paolo Pisati ]
 605
 606   * import http://git.linaro.org/landing-teams/working/qualcomm/kernel.git @
 607     ubuntu-qcom-dragonboard410c-15.09
 608   * rebased on Ubuntu-4.2.0-19.23
 609
 610  --  Paolo Pisati <paolo.pisati@canonical.com>  Thu, 03 Dec 2015 17:18:07 +0200