]> git.proxmox.com Git - mirror_qemu.git/blob - disas.c
nfs: Remove processed options from QDict
[mirror_qemu.git] / disas.c
1 /* General "disassemble this chunk" code. Used for debugging. */
2 #include "qemu/osdep.h"
3 #include "qemu-common.h"
4 #include "disas/bfd.h"
5 #include "elf.h"
6
7 #include "cpu.h"
8 #include "disas/disas.h"
9 #include "disas/capstone.h"
10
11 typedef struct CPUDebug {
12 struct disassemble_info info;
13 CPUState *cpu;
14 } CPUDebug;
15
16 /* Filled in by elfload.c. Simplistic, but will do for now. */
17 struct syminfo *syminfos = NULL;
18
19 /* Get LENGTH bytes from info's buffer, at target address memaddr.
20 Transfer them to myaddr. */
21 int
22 buffer_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
23 struct disassemble_info *info)
24 {
25 if (memaddr < info->buffer_vma
26 || memaddr + length > info->buffer_vma + info->buffer_length)
27 /* Out of bounds. Use EIO because GDB uses it. */
28 return EIO;
29 memcpy (myaddr, info->buffer + (memaddr - info->buffer_vma), length);
30 return 0;
31 }
32
33 /* Get LENGTH bytes from info's buffer, at target address memaddr.
34 Transfer them to myaddr. */
35 static int
36 target_read_memory (bfd_vma memaddr,
37 bfd_byte *myaddr,
38 int length,
39 struct disassemble_info *info)
40 {
41 CPUDebug *s = container_of(info, CPUDebug, info);
42
43 cpu_memory_rw_debug(s->cpu, memaddr, myaddr, length, 0);
44 return 0;
45 }
46
47 /* Print an error message. We can assume that this is in response to
48 an error return from buffer_read_memory. */
49 void
50 perror_memory (int status, bfd_vma memaddr, struct disassemble_info *info)
51 {
52 if (status != EIO)
53 /* Can't happen. */
54 (*info->fprintf_func) (info->stream, "Unknown error %d\n", status);
55 else
56 /* Actually, address between memaddr and memaddr + len was
57 out of bounds. */
58 (*info->fprintf_func) (info->stream,
59 "Address 0x%" PRIx64 " is out of bounds.\n", memaddr);
60 }
61
62 /* This could be in a separate file, to save minuscule amounts of space
63 in statically linked executables. */
64
65 /* Just print the address is hex. This is included for completeness even
66 though both GDB and objdump provide their own (to print symbolic
67 addresses). */
68
69 void
70 generic_print_address (bfd_vma addr, struct disassemble_info *info)
71 {
72 (*info->fprintf_func) (info->stream, "0x%" PRIx64, addr);
73 }
74
75 /* Print address in hex, truncated to the width of a host virtual address. */
76 static void
77 generic_print_host_address(bfd_vma addr, struct disassemble_info *info)
78 {
79 uint64_t mask = ~0ULL >> (64 - (sizeof(void *) * 8));
80 generic_print_address(addr & mask, info);
81 }
82
83 /* Just return the given address. */
84
85 int
86 generic_symbol_at_address (bfd_vma addr, struct disassemble_info *info)
87 {
88 return 1;
89 }
90
91 bfd_vma bfd_getl64 (const bfd_byte *addr)
92 {
93 unsigned long long v;
94
95 v = (unsigned long long) addr[0];
96 v |= (unsigned long long) addr[1] << 8;
97 v |= (unsigned long long) addr[2] << 16;
98 v |= (unsigned long long) addr[3] << 24;
99 v |= (unsigned long long) addr[4] << 32;
100 v |= (unsigned long long) addr[5] << 40;
101 v |= (unsigned long long) addr[6] << 48;
102 v |= (unsigned long long) addr[7] << 56;
103 return (bfd_vma) v;
104 }
105
106 bfd_vma bfd_getl32 (const bfd_byte *addr)
107 {
108 unsigned long v;
109
110 v = (unsigned long) addr[0];
111 v |= (unsigned long) addr[1] << 8;
112 v |= (unsigned long) addr[2] << 16;
113 v |= (unsigned long) addr[3] << 24;
114 return (bfd_vma) v;
115 }
116
117 bfd_vma bfd_getb32 (const bfd_byte *addr)
118 {
119 unsigned long v;
120
121 v = (unsigned long) addr[0] << 24;
122 v |= (unsigned long) addr[1] << 16;
123 v |= (unsigned long) addr[2] << 8;
124 v |= (unsigned long) addr[3];
125 return (bfd_vma) v;
126 }
127
128 bfd_vma bfd_getl16 (const bfd_byte *addr)
129 {
130 unsigned long v;
131
132 v = (unsigned long) addr[0];
133 v |= (unsigned long) addr[1] << 8;
134 return (bfd_vma) v;
135 }
136
137 bfd_vma bfd_getb16 (const bfd_byte *addr)
138 {
139 unsigned long v;
140
141 v = (unsigned long) addr[0] << 24;
142 v |= (unsigned long) addr[1] << 16;
143 return (bfd_vma) v;
144 }
145
146 static int print_insn_objdump(bfd_vma pc, disassemble_info *info,
147 const char *prefix)
148 {
149 int i, n = info->buffer_length;
150 uint8_t *buf = g_malloc(n);
151
152 info->read_memory_func(pc, buf, n, info);
153
154 for (i = 0; i < n; ++i) {
155 if (i % 32 == 0) {
156 info->fprintf_func(info->stream, "\n%s: ", prefix);
157 }
158 info->fprintf_func(info->stream, "%02x", buf[i]);
159 }
160
161 g_free(buf);
162 return n;
163 }
164
165 static int print_insn_od_host(bfd_vma pc, disassemble_info *info)
166 {
167 return print_insn_objdump(pc, info, "OBJD-H");
168 }
169
170 static int print_insn_od_target(bfd_vma pc, disassemble_info *info)
171 {
172 return print_insn_objdump(pc, info, "OBJD-T");
173 }
174
175 #ifdef CONFIG_CAPSTONE
176 /* Temporary storage for the capstone library. This will be alloced via
177 malloc with a size private to the library; thus there's no reason not
178 to share this across calls and across host vs target disassembly. */
179 static __thread cs_insn *cap_insn;
180
181 /* Initialize the Capstone library. */
182 /* ??? It would be nice to cache this. We would need one handle for the
183 host and one for the target. For most targets we can reset specific
184 parameters via cs_option(CS_OPT_MODE, new_mode), but we cannot change
185 CS_ARCH_* in this way. Thus we would need to be able to close and
186 re-open the target handle with a different arch for the target in order
187 to handle AArch64 vs AArch32 mode switching. */
188 static cs_err cap_disas_start(disassemble_info *info, csh *handle)
189 {
190 cs_mode cap_mode = info->cap_mode;
191 cs_err err;
192
193 cap_mode += (info->endian == BFD_ENDIAN_BIG ? CS_MODE_BIG_ENDIAN
194 : CS_MODE_LITTLE_ENDIAN);
195
196 err = cs_open(info->cap_arch, cap_mode, handle);
197 if (err != CS_ERR_OK) {
198 return err;
199 }
200
201 /* ??? There probably ought to be a better place to put this. */
202 if (info->cap_arch == CS_ARCH_X86) {
203 /* We don't care about errors (if for some reason the library
204 is compiled without AT&T syntax); the user will just have
205 to deal with the Intel syntax. */
206 cs_option(*handle, CS_OPT_SYNTAX, CS_OPT_SYNTAX_ATT);
207 }
208
209 /* "Disassemble" unknown insns as ".byte W,X,Y,Z". */
210 cs_option(*handle, CS_OPT_SKIPDATA, CS_OPT_ON);
211
212 /* Allocate temp space for cs_disasm_iter. */
213 if (cap_insn == NULL) {
214 cap_insn = cs_malloc(*handle);
215 if (cap_insn == NULL) {
216 cs_close(handle);
217 return CS_ERR_MEM;
218 }
219 }
220 return CS_ERR_OK;
221 }
222
223 static void cap_dump_insn_units(disassemble_info *info, cs_insn *insn,
224 int i, int n)
225 {
226 fprintf_function print = info->fprintf_func;
227 FILE *stream = info->stream;
228
229 switch (info->cap_insn_unit) {
230 case 4:
231 if (info->endian == BFD_ENDIAN_BIG) {
232 for (; i < n; i += 4) {
233 print(stream, " %08x", ldl_be_p(insn->bytes + i));
234
235 }
236 } else {
237 for (; i < n; i += 4) {
238 print(stream, " %08x", ldl_le_p(insn->bytes + i));
239 }
240 }
241 break;
242
243 case 2:
244 if (info->endian == BFD_ENDIAN_BIG) {
245 for (; i < n; i += 2) {
246 print(stream, " %04x", lduw_be_p(insn->bytes + i));
247 }
248 } else {
249 for (; i < n; i += 2) {
250 print(stream, " %04x", lduw_le_p(insn->bytes + i));
251 }
252 }
253 break;
254
255 default:
256 for (; i < n; i++) {
257 print(stream, " %02x", insn->bytes[i]);
258 }
259 break;
260 }
261 }
262
263 static void cap_dump_insn(disassemble_info *info, cs_insn *insn)
264 {
265 fprintf_function print = info->fprintf_func;
266 int i, n, split;
267
268 print(info->stream, "0x%08" PRIx64 ": ", insn->address);
269
270 n = insn->size;
271 split = info->cap_insn_split;
272
273 /* Dump the first SPLIT bytes of the instruction. */
274 cap_dump_insn_units(info, insn, 0, MIN(n, split));
275
276 /* Add padding up to SPLIT so that mnemonics line up. */
277 if (n < split) {
278 int width = (split - n) / info->cap_insn_unit;
279 width *= (2 * info->cap_insn_unit + 1);
280 print(info->stream, "%*s", width, "");
281 }
282
283 /* Print the actual instruction. */
284 print(info->stream, " %-8s %s\n", insn->mnemonic, insn->op_str);
285
286 /* Dump any remaining part of the insn on subsequent lines. */
287 for (i = split; i < n; i += split) {
288 print(info->stream, "0x%08" PRIx64 ": ", insn->address + i);
289 cap_dump_insn_units(info, insn, i, MIN(n, i + split));
290 print(info->stream, "\n");
291 }
292 }
293
294 /* Disassemble SIZE bytes at PC for the target. */
295 static bool cap_disas_target(disassemble_info *info, uint64_t pc, size_t size)
296 {
297 uint8_t cap_buf[1024];
298 csh handle;
299 cs_insn *insn;
300 size_t csize = 0;
301
302 if (cap_disas_start(info, &handle) != CS_ERR_OK) {
303 return false;
304 }
305 insn = cap_insn;
306
307 while (1) {
308 size_t tsize = MIN(sizeof(cap_buf) - csize, size);
309 const uint8_t *cbuf = cap_buf;
310
311 target_read_memory(pc + csize, cap_buf + csize, tsize, info);
312 csize += tsize;
313 size -= tsize;
314
315 while (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
316 cap_dump_insn(info, insn);
317 }
318
319 /* If the target memory is not consumed, go back for more... */
320 if (size != 0) {
321 /* ... taking care to move any remaining fractional insn
322 to the beginning of the buffer. */
323 if (csize != 0) {
324 memmove(cap_buf, cbuf, csize);
325 }
326 continue;
327 }
328
329 /* Since the target memory is consumed, we should not have
330 a remaining fractional insn. */
331 if (csize != 0) {
332 (*info->fprintf_func)(info->stream,
333 "Disassembler disagrees with translator "
334 "over instruction decoding\n"
335 "Please report this to qemu-devel@nongnu.org\n");
336 }
337 break;
338 }
339
340 cs_close(&handle);
341 return true;
342 }
343
344 /* Disassemble SIZE bytes at CODE for the host. */
345 static bool cap_disas_host(disassemble_info *info, void *code, size_t size)
346 {
347 csh handle;
348 const uint8_t *cbuf;
349 cs_insn *insn;
350 uint64_t pc;
351
352 if (cap_disas_start(info, &handle) != CS_ERR_OK) {
353 return false;
354 }
355 insn = cap_insn;
356
357 cbuf = code;
358 pc = (uintptr_t)code;
359
360 while (cs_disasm_iter(handle, &cbuf, &size, &pc, insn)) {
361 cap_dump_insn(info, insn);
362 }
363 if (size != 0) {
364 (*info->fprintf_func)(info->stream,
365 "Disassembler disagrees with TCG over instruction encoding\n"
366 "Please report this to qemu-devel@nongnu.org\n");
367 }
368
369 cs_close(&handle);
370 return true;
371 }
372
373 #if !defined(CONFIG_USER_ONLY)
374 /* Disassemble COUNT insns at PC for the target. */
375 static bool cap_disas_monitor(disassemble_info *info, uint64_t pc, int count)
376 {
377 uint8_t cap_buf[32];
378 csh handle;
379 cs_insn *insn;
380 size_t csize = 0;
381
382 if (cap_disas_start(info, &handle) != CS_ERR_OK) {
383 return false;
384 }
385 insn = cap_insn;
386
387 while (1) {
388 /* We want to read memory for one insn, but generically we do not
389 know how much memory that is. We have a small buffer which is
390 known to be sufficient for all supported targets. Try to not
391 read beyond the page, Just In Case. For even more simplicity,
392 ignore the actual target page size and use a 1k boundary. If
393 that turns out to be insufficient, we'll come back around the
394 loop and read more. */
395 uint64_t epc = QEMU_ALIGN_UP(pc + csize + 1, 1024);
396 size_t tsize = MIN(sizeof(cap_buf) - csize, epc - pc);
397 const uint8_t *cbuf = cap_buf;
398
399 /* Make certain that we can make progress. */
400 assert(tsize != 0);
401 info->read_memory_func(pc, cap_buf + csize, tsize, info);
402 csize += tsize;
403
404 if (cs_disasm_iter(handle, &cbuf, &csize, &pc, insn)) {
405 cap_dump_insn(info, insn);
406 if (--count <= 0) {
407 break;
408 }
409 }
410 memmove(cap_buf, cbuf, csize);
411 }
412
413 cs_close(&handle);
414 return true;
415 }
416 #endif /* !CONFIG_USER_ONLY */
417 #else
418 # define cap_disas_target(i, p, s) false
419 # define cap_disas_host(i, p, s) false
420 # define cap_disas_monitor(i, p, c) false
421 #endif /* CONFIG_CAPSTONE */
422
423 /* Disassemble this for me please... (debugging). */
424 void target_disas(FILE *out, CPUState *cpu, target_ulong code,
425 target_ulong size)
426 {
427 CPUClass *cc = CPU_GET_CLASS(cpu);
428 target_ulong pc;
429 int count;
430 CPUDebug s;
431
432 INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
433
434 s.cpu = cpu;
435 s.info.read_memory_func = target_read_memory;
436 s.info.buffer_vma = code;
437 s.info.buffer_length = size;
438 s.info.print_address_func = generic_print_address;
439 s.info.cap_arch = -1;
440 s.info.cap_mode = 0;
441 s.info.cap_insn_unit = 4;
442 s.info.cap_insn_split = 4;
443
444 #ifdef TARGET_WORDS_BIGENDIAN
445 s.info.endian = BFD_ENDIAN_BIG;
446 #else
447 s.info.endian = BFD_ENDIAN_LITTLE;
448 #endif
449
450 if (cc->disas_set_info) {
451 cc->disas_set_info(cpu, &s.info);
452 }
453
454 if (s.info.cap_arch >= 0 && cap_disas_target(&s.info, code, size)) {
455 return;
456 }
457
458 if (s.info.print_insn == NULL) {
459 s.info.print_insn = print_insn_od_target;
460 }
461
462 for (pc = code; size > 0; pc += count, size -= count) {
463 fprintf(out, "0x" TARGET_FMT_lx ": ", pc);
464 count = s.info.print_insn(pc, &s.info);
465 fprintf(out, "\n");
466 if (count < 0)
467 break;
468 if (size < count) {
469 fprintf(out,
470 "Disassembler disagrees with translator over instruction "
471 "decoding\n"
472 "Please report this to qemu-devel@nongnu.org\n");
473 break;
474 }
475 }
476 }
477
478 /* Disassemble this for me please... (debugging). */
479 void disas(FILE *out, void *code, unsigned long size)
480 {
481 uintptr_t pc;
482 int count;
483 CPUDebug s;
484 int (*print_insn)(bfd_vma pc, disassemble_info *info) = NULL;
485
486 INIT_DISASSEMBLE_INFO(s.info, out, fprintf);
487 s.info.print_address_func = generic_print_host_address;
488
489 s.info.buffer = code;
490 s.info.buffer_vma = (uintptr_t)code;
491 s.info.buffer_length = size;
492 s.info.cap_arch = -1;
493 s.info.cap_mode = 0;
494 s.info.cap_insn_unit = 4;
495 s.info.cap_insn_split = 4;
496
497 #ifdef HOST_WORDS_BIGENDIAN
498 s.info.endian = BFD_ENDIAN_BIG;
499 #else
500 s.info.endian = BFD_ENDIAN_LITTLE;
501 #endif
502 #if defined(CONFIG_TCG_INTERPRETER)
503 print_insn = print_insn_tci;
504 #elif defined(__i386__)
505 s.info.mach = bfd_mach_i386_i386;
506 print_insn = print_insn_i386;
507 s.info.cap_arch = CS_ARCH_X86;
508 s.info.cap_mode = CS_MODE_32;
509 s.info.cap_insn_unit = 1;
510 s.info.cap_insn_split = 8;
511 #elif defined(__x86_64__)
512 s.info.mach = bfd_mach_x86_64;
513 print_insn = print_insn_i386;
514 s.info.cap_arch = CS_ARCH_X86;
515 s.info.cap_mode = CS_MODE_64;
516 s.info.cap_insn_unit = 1;
517 s.info.cap_insn_split = 8;
518 #elif defined(_ARCH_PPC)
519 s.info.disassembler_options = (char *)"any";
520 print_insn = print_insn_ppc;
521 s.info.cap_arch = CS_ARCH_PPC;
522 # ifdef _ARCH_PPC64
523 s.info.cap_mode = CS_MODE_64;
524 # endif
525 #elif defined(__riscv__)
526 print_insn = print_insn_riscv;
527 #elif defined(__aarch64__) && defined(CONFIG_ARM_A64_DIS)
528 print_insn = print_insn_arm_a64;
529 s.info.cap_arch = CS_ARCH_ARM64;
530 #elif defined(__alpha__)
531 print_insn = print_insn_alpha;
532 #elif defined(__sparc__)
533 print_insn = print_insn_sparc;
534 s.info.mach = bfd_mach_sparc_v9b;
535 #elif defined(__arm__)
536 print_insn = print_insn_arm;
537 s.info.cap_arch = CS_ARCH_ARM;
538 /* TCG only generates code for arm mode. */
539 #elif defined(__MIPSEB__)
540 print_insn = print_insn_big_mips;
541 #elif defined(__MIPSEL__)
542 print_insn = print_insn_little_mips;
543 #elif defined(__m68k__)
544 print_insn = print_insn_m68k;
545 #elif defined(__s390__)
546 print_insn = print_insn_s390;
547 #elif defined(__hppa__)
548 print_insn = print_insn_hppa;
549 #endif
550
551 if (s.info.cap_arch >= 0 && cap_disas_host(&s.info, code, size)) {
552 return;
553 }
554
555 if (print_insn == NULL) {
556 print_insn = print_insn_od_host;
557 }
558 for (pc = (uintptr_t)code; size > 0; pc += count, size -= count) {
559 fprintf(out, "0x%08" PRIxPTR ": ", pc);
560 count = print_insn(pc, &s.info);
561 fprintf(out, "\n");
562 if (count < 0)
563 break;
564 }
565 }
566
567 /* Look up symbol for debugging purpose. Returns "" if unknown. */
568 const char *lookup_symbol(target_ulong orig_addr)
569 {
570 const char *symbol = "";
571 struct syminfo *s;
572
573 for (s = syminfos; s; s = s->next) {
574 symbol = s->lookup_symbol(s, orig_addr);
575 if (symbol[0] != '\0') {
576 break;
577 }
578 }
579
580 return symbol;
581 }
582
583 #if !defined(CONFIG_USER_ONLY)
584
585 #include "monitor/monitor.h"
586
587 static int
588 physical_read_memory(bfd_vma memaddr, bfd_byte *myaddr, int length,
589 struct disassemble_info *info)
590 {
591 cpu_physical_memory_read(memaddr, myaddr, length);
592 return 0;
593 }
594
595 /* Disassembler for the monitor. */
596 void monitor_disas(Monitor *mon, CPUState *cpu,
597 target_ulong pc, int nb_insn, int is_physical)
598 {
599 CPUClass *cc = CPU_GET_CLASS(cpu);
600 int count, i;
601 CPUDebug s;
602
603 INIT_DISASSEMBLE_INFO(s.info, (FILE *)mon, monitor_fprintf);
604
605 s.cpu = cpu;
606 s.info.read_memory_func
607 = (is_physical ? physical_read_memory : target_read_memory);
608 s.info.print_address_func = generic_print_address;
609 s.info.buffer_vma = pc;
610 s.info.cap_arch = -1;
611 s.info.cap_mode = 0;
612 s.info.cap_insn_unit = 4;
613 s.info.cap_insn_split = 4;
614
615 #ifdef TARGET_WORDS_BIGENDIAN
616 s.info.endian = BFD_ENDIAN_BIG;
617 #else
618 s.info.endian = BFD_ENDIAN_LITTLE;
619 #endif
620
621 if (cc->disas_set_info) {
622 cc->disas_set_info(cpu, &s.info);
623 }
624
625 if (s.info.cap_arch >= 0 && cap_disas_monitor(&s.info, pc, nb_insn)) {
626 return;
627 }
628
629 if (!s.info.print_insn) {
630 monitor_printf(mon, "0x" TARGET_FMT_lx
631 ": Asm output not supported on this arch\n", pc);
632 return;
633 }
634
635 for(i = 0; i < nb_insn; i++) {
636 monitor_printf(mon, "0x" TARGET_FMT_lx ": ", pc);
637 count = s.info.print_insn(pc, &s.info);
638 monitor_printf(mon, "\n");
639 if (count < 0)
640 break;
641 pc += count;
642 }
643 }
644 #endif