1 /******************************************************************************
3 * Module Name: nspredef - Validation of ACPI predefined methods and objects
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2013, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
44 #define ACPI_CREATE_PREDEFINED_TABLE
46 #include <acpi/acpi.h>
51 #define _COMPONENT ACPI_NAMESPACE
52 ACPI_MODULE_NAME("nspredef")
54 /*******************************************************************************
56 * This module validates predefined ACPI objects that appear in the namespace,
57 * at the time they are evaluated (via acpi_evaluate_object). The purpose of this
58 * validation is to detect problems with BIOS-exposed predefined ACPI objects
59 * before the results are returned to the ACPI-related drivers.
61 * There are several areas that are validated:
63 * 1) The number of input arguments as defined by the method/object in the
64 * ASL is validated against the ACPI specification.
65 * 2) The type of the return object (if any) is validated against the ACPI
67 * 3) For returned package objects, the count of package elements is
68 * validated, as well as the type of each package element. Nested
69 * packages are supported.
71 * For any problems found, a warning message is issued.
73 ******************************************************************************/
74 /* Local prototypes */
76 acpi_ns_check_reference(struct acpi_evaluate_info
*info
,
77 union acpi_operand_object
*return_object
);
79 static u32
acpi_ns_get_bitmapped_type(union acpi_operand_object
*return_object
);
81 /*******************************************************************************
83 * FUNCTION: acpi_ns_check_return_value
85 * PARAMETERS: node - Namespace node for the method/object
86 * info - Method execution information block
87 * user_param_count - Number of parameters actually passed
88 * return_status - Status from the object evaluation
89 * return_object_ptr - Pointer to the object returned from the
90 * evaluation of a method or object
94 * DESCRIPTION: Check the value returned from a predefined name.
96 ******************************************************************************/
99 acpi_ns_check_return_value(struct acpi_namespace_node
*node
,
100 struct acpi_evaluate_info
*info
,
101 u32 user_param_count
,
102 acpi_status return_status
,
103 union acpi_operand_object
**return_object_ptr
)
106 const union acpi_predefined_info
*predefined
;
108 /* If not a predefined name, we cannot validate the return object */
110 predefined
= info
->predefined
;
116 * If the method failed or did not actually return an object, we cannot
117 * validate the return object
119 if ((return_status
!= AE_OK
) && (return_status
!= AE_CTRL_RETURN_VALUE
)) {
124 * Return value validation and possible repair.
126 * 1) Don't perform return value validation/repair if this feature
127 * has been disabled via a global option.
129 * 2) We have a return value, but if one wasn't expected, just exit,
130 * this is not a problem. For example, if the "Implicit Return"
131 * feature is enabled, methods will always return a value.
133 * 3) If the return value can be of any type, then we cannot perform
134 * any validation, just exit.
136 if (acpi_gbl_disable_auto_repair
||
137 (!predefined
->info
.expected_btypes
) ||
138 (predefined
->info
.expected_btypes
== ACPI_RTYPE_ALL
)) {
143 * Check that the type of the main return object is what is expected
144 * for this predefined name
146 status
= acpi_ns_check_object_type(info
, return_object_ptr
,
147 predefined
->info
.expected_btypes
,
148 ACPI_NOT_PACKAGE_ELEMENT
);
149 if (ACPI_FAILURE(status
)) {
154 * For returned Package objects, check the type of all sub-objects.
155 * Note: Package may have been newly created by call above.
157 if ((*return_object_ptr
)->common
.type
== ACPI_TYPE_PACKAGE
) {
158 info
->parent_package
= *return_object_ptr
;
159 status
= acpi_ns_check_package(info
, return_object_ptr
);
160 if (ACPI_FAILURE(status
)) {
166 * The return object was OK, or it was successfully repaired above.
167 * Now make some additional checks such as verifying that package
168 * objects are sorted correctly (if required) or buffer objects have
169 * the correct data width (bytes vs. dwords). These repairs are
170 * performed on a per-name basis, i.e., the code is specific to
171 * particular predefined names.
173 status
= acpi_ns_complex_repairs(info
, node
, status
, return_object_ptr
);
177 * If the object validation failed or if we successfully repaired one
178 * or more objects, mark the parent node to suppress further warning
179 * messages during the next evaluation of the same method/object.
181 if (ACPI_FAILURE(status
) || (info
->return_flags
& ACPI_OBJECT_REPAIRED
)) {
182 node
->flags
|= ANOBJ_EVALUATED
;
188 /*******************************************************************************
190 * FUNCTION: acpi_ns_check_object_type
192 * PARAMETERS: info - Method execution information block
193 * return_object_ptr - Pointer to the object returned from the
194 * evaluation of a method or object
195 * expected_btypes - Bitmap of expected return type(s)
196 * package_index - Index of object within parent package (if
197 * applicable - ACPI_NOT_PACKAGE_ELEMENT
202 * DESCRIPTION: Check the type of the return object against the expected object
203 * type(s). Use of Btype allows multiple expected object types.
205 ******************************************************************************/
208 acpi_ns_check_object_type(struct acpi_evaluate_info
*info
,
209 union acpi_operand_object
**return_object_ptr
,
210 u32 expected_btypes
, u32 package_index
)
212 union acpi_operand_object
*return_object
= *return_object_ptr
;
213 acpi_status status
= AE_OK
;
214 char type_buffer
[48]; /* Room for 5 types */
216 /* A Namespace node should not get here, but make sure */
219 ACPI_GET_DESCRIPTOR_TYPE(return_object
) == ACPI_DESC_TYPE_NAMED
) {
220 ACPI_WARN_PREDEFINED((AE_INFO
, info
->full_pathname
,
222 "Invalid return type - Found a Namespace node [%4.4s] type %s",
223 return_object
->node
.name
.ascii
,
224 acpi_ut_get_type_name(return_object
->node
.
226 return (AE_AML_OPERAND_TYPE
);
230 * Convert the object type (ACPI_TYPE_xxx) to a bitmapped object type.
231 * The bitmapped type allows multiple possible return types.
233 * Note, the cases below must handle all of the possible types returned
234 * from all of the predefined names (including elements of returned
237 info
->return_btype
= acpi_ns_get_bitmapped_type(return_object
);
238 if (info
->return_btype
== ACPI_RTYPE_ANY
) {
240 /* Not one of the supported objects, must be incorrect */
241 goto type_error_exit
;
244 /* For reference objects, check that the reference type is correct */
246 if ((info
->return_btype
& expected_btypes
) == ACPI_RTYPE_REFERENCE
) {
247 status
= acpi_ns_check_reference(info
, return_object
);
251 /* Attempt simple repair of the returned object if necessary */
253 status
= acpi_ns_simple_repair(info
, expected_btypes
,
254 package_index
, return_object_ptr
);
255 if (ACPI_SUCCESS(status
)) {
256 return (AE_OK
); /* Successful repair */
261 /* Create a string with all expected types for this predefined object */
263 acpi_ut_get_expected_return_types(type_buffer
, expected_btypes
);
265 if (package_index
== ACPI_NOT_PACKAGE_ELEMENT
) {
266 ACPI_WARN_PREDEFINED((AE_INFO
, info
->full_pathname
,
268 "Return type mismatch - found %s, expected %s",
269 acpi_ut_get_object_type_name
270 (return_object
), type_buffer
));
272 ACPI_WARN_PREDEFINED((AE_INFO
, info
->full_pathname
,
274 "Return Package type mismatch at index %u - "
275 "found %s, expected %s", package_index
,
276 acpi_ut_get_object_type_name
277 (return_object
), type_buffer
));
280 return (AE_AML_OPERAND_TYPE
);
283 /*******************************************************************************
285 * FUNCTION: acpi_ns_check_reference
287 * PARAMETERS: info - Method execution information block
288 * return_object - Object returned from the evaluation of a
293 * DESCRIPTION: Check a returned reference object for the correct reference
294 * type. The only reference type that can be returned from a
295 * predefined method is a named reference. All others are invalid.
297 ******************************************************************************/
300 acpi_ns_check_reference(struct acpi_evaluate_info
*info
,
301 union acpi_operand_object
*return_object
)
305 * Check the reference object for the correct reference type (opcode).
306 * The only type of reference that can be converted to an union acpi_object is
307 * a reference to a named object (reference class: NAME)
309 if (return_object
->reference
.class == ACPI_REFCLASS_NAME
) {
313 ACPI_WARN_PREDEFINED((AE_INFO
, info
->full_pathname
, info
->node_flags
,
314 "Return type mismatch - unexpected reference object type [%s] %2.2X",
315 acpi_ut_get_reference_name(return_object
),
316 return_object
->reference
.class));
318 return (AE_AML_OPERAND_TYPE
);
321 /*******************************************************************************
323 * FUNCTION: acpi_ns_get_bitmapped_type
325 * PARAMETERS: return_object - Object returned from method/obj evaluation
327 * RETURN: Object return type. ACPI_RTYPE_ANY indicates that the object
328 * type is not supported. ACPI_RTYPE_NONE indicates that no
329 * object was returned (return_object is NULL).
331 * DESCRIPTION: Convert object type into a bitmapped object return type.
333 ******************************************************************************/
335 static u32
acpi_ns_get_bitmapped_type(union acpi_operand_object
*return_object
)
339 if (!return_object
) {
340 return (ACPI_RTYPE_NONE
);
343 /* Map acpi_object_type to internal bitmapped type */
345 switch (return_object
->common
.type
) {
346 case ACPI_TYPE_INTEGER
:
348 return_btype
= ACPI_RTYPE_INTEGER
;
351 case ACPI_TYPE_BUFFER
:
353 return_btype
= ACPI_RTYPE_BUFFER
;
356 case ACPI_TYPE_STRING
:
358 return_btype
= ACPI_RTYPE_STRING
;
361 case ACPI_TYPE_PACKAGE
:
363 return_btype
= ACPI_RTYPE_PACKAGE
;
366 case ACPI_TYPE_LOCAL_REFERENCE
:
368 return_btype
= ACPI_RTYPE_REFERENCE
;
373 /* Not one of the supported objects, must be incorrect */
375 return_btype
= ACPI_RTYPE_ANY
;
379 return (return_btype
);