drivers/acpi/acpica/nsrepair.c

   1 /******************************************************************************
   2  *
   3  * Module Name: nsrepair - Repair for objects returned by predefined methods
   4  *
   5  *****************************************************************************/
   6
   7 /*
   8  * Copyright (C) 2000 - 2013, Intel Corp.
   9  * All rights reserved.
  10  *
  11  * Redistribution and use in source and binary forms, with or without
  12  * modification, are permitted provided that the following conditions
  13  * are met:
  14  * 1. Redistributions of source code must retain the above copyright
  15  *    notice, this list of conditions, and the following disclaimer,
  16  *    without modification.
  17  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
  18  *    substantially similar to the "NO WARRANTY" disclaimer below
  19  *    ("Disclaimer") and any redistribution must be conditioned upon
  20  *    including a substantially similar Disclaimer requirement for further
  21  *    binary redistribution.
  22  * 3. Neither the names of the above-listed copyright holders nor the names
  23  *    of any contributors may be used to endorse or promote products derived
  24  *    from this software without specific prior written permission.
  25  *
  26  * Alternatively, this software may be distributed under the terms of the
  27  * GNU General Public License ("GPL") version 2 as published by the Free
  28  * Software Foundation.
  29  *
  30  * NO WARRANTY
  31  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
  32  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
  33  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
  34  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
  35  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  36  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  37  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  38  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
  39  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
  40  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  41  * POSSIBILITY OF SUCH DAMAGES.
  42  */
  43
  44 #include <acpi/acpi.h>
  45 #include "accommon.h"
  46 #include "acnamesp.h"
  47 #include "acinterp.h"
  48 #include "acpredef.h"
  49 #include "amlresrc.h"
  50
  51 #define _COMPONENT          ACPI_NAMESPACE
  52 ACPI_MODULE_NAME("nsrepair")
  53
  54 /*******************************************************************************
  55  *
  56  * This module attempts to repair or convert objects returned by the
  57  * predefined methods to an object type that is expected, as per the ACPI
  58  * specification. The need for this code is dictated by the many machines that
  59  * return incorrect types for the standard predefined methods. Performing these
  60  * conversions here, in one place, eliminates the need for individual ACPI
  61  * device drivers to do the same. Note: Most of these conversions are different
  62  * than the internal object conversion routines used for implicit object
  63  * conversion.
  64  *
  65  * The following conversions can be performed as necessary:
  66  *
  67  * Integer -> String
  68  * Integer -> Buffer
  69  * String  -> Integer
  70  * String  -> Buffer
  71  * Buffer  -> Integer
  72  * Buffer  -> String
  73  * Buffer  -> Package of Integers
  74  * Package -> Package of one Package
  75  *
  76  * Additional conversions that are available:
  77  *  Convert a null return or zero return value to an end_tag descriptor
  78  *  Convert an ASCII string to a Unicode buffer
  79  *
  80  * An incorrect standalone object is wrapped with required outer package
  81  *
  82  * Additional possible repairs:
  83  * Required package elements that are NULL replaced by Integer/String/Buffer
  84  *
  85  ******************************************************************************/
  86 /* Local prototypes */
  87 static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct
  88                                                                          acpi_namespace_node
  89                                                                          *node,
  90                                                                          u32
  91                                                                          return_btype,
  92                                                                          u32
  93                                                                          package_index);
  94
  95 /*
  96  * Special but simple repairs for some names.
  97  *
  98  * 2nd argument: Unexpected types that can be repaired
  99  */
 100 static const struct acpi_simple_repair_info acpi_object_repair_info[] = {
 101         /* Resource descriptor conversions */
 102
 103         {"_CRS",
 104          ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER |
 105          ACPI_RTYPE_NONE,
 106          ACPI_NOT_PACKAGE_ELEMENT,
 107          acpi_ns_convert_to_resource},
 108         {"_DMA",
 109          ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER |
 110          ACPI_RTYPE_NONE,
 111          ACPI_NOT_PACKAGE_ELEMENT,
 112          acpi_ns_convert_to_resource},
 113         {"_PRS",
 114          ACPI_RTYPE_INTEGER | ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER |
 115          ACPI_RTYPE_NONE,
 116          ACPI_NOT_PACKAGE_ELEMENT,
 117          acpi_ns_convert_to_resource},
 118
 119         /* Unicode conversions */
 120
 121         {"_MLS", ACPI_RTYPE_STRING, 1,
 122          acpi_ns_convert_to_unicode},
 123         {"_STR", ACPI_RTYPE_STRING | ACPI_RTYPE_BUFFER,
 124          ACPI_NOT_PACKAGE_ELEMENT,
 125          acpi_ns_convert_to_unicode},
 126         {{0, 0, 0, 0}, 0, 0, NULL}      /* Table terminator */
 127 };
 128
 129 /*******************************************************************************
 130  *
 131  * FUNCTION:    acpi_ns_simple_repair
 132  *
 133  * PARAMETERS:  info                - Method execution information block
 134  *              expected_btypes     - Object types expected
 135  *              package_index       - Index of object within parent package (if
 136  *                                    applicable - ACPI_NOT_PACKAGE_ELEMENT
 137  *                                    otherwise)
 138  *              return_object_ptr   - Pointer to the object returned from the
 139  *                                    evaluation of a method or object
 140  *
 141  * RETURN:      Status. AE_OK if repair was successful.
 142  *
 143  * DESCRIPTION: Attempt to repair/convert a return object of a type that was
 144  *              not expected.
 145  *
 146  ******************************************************************************/
 147
 148 acpi_status
 149 acpi_ns_simple_repair(struct acpi_evaluate_info *info,
 150                       u32 expected_btypes,
 151                       u32 package_index,
 152                       union acpi_operand_object **return_object_ptr)
 153 {
 154         union acpi_operand_object *return_object = *return_object_ptr;
 155         union acpi_operand_object *new_object = NULL;
 156         acpi_status status;
 157         const struct acpi_simple_repair_info *predefined;
 158
 159         ACPI_FUNCTION_NAME(ns_simple_repair);
 160
 161         /*
 162          * Special repairs for certain names that are in the repair table.
 163          * Check if this name is in the list of repairable names.
 164          */
 165         predefined = acpi_ns_match_simple_repair(info->node,
 166                                                  info->return_btype,
 167                                                  package_index);
 168         if (predefined) {
 169                 if (!return_object) {
 170                         ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname,
 171                                               ACPI_WARN_ALWAYS,
 172                                               "Missing expected return value"));
 173                 }
 174
 175                 status =
 176                     predefined->object_converter(return_object, &new_object);
 177                 if (ACPI_FAILURE(status)) {
 178
 179                         /* A fatal error occurred during a conversion */
 180
 181                         ACPI_EXCEPTION((AE_INFO, status,
 182                                         "During return object analysis"));
 183                         return (status);
 184                 }
 185                 if (new_object) {
 186                         goto object_repaired;
 187                 }
 188         }
 189
 190         /*
 191          * Do not perform simple object repair unless the return type is not
 192          * expected.
 193          */
 194         if (info->return_btype & expected_btypes) {
 195                 return (AE_OK);
 196         }
 197
 198         /*
 199          * At this point, we know that the type of the returned object was not
 200          * one of the expected types for this predefined name. Attempt to
 201          * repair the object by converting it to one of the expected object
 202          * types for this predefined name.
 203          */
 204
 205         /*
 206          * If there is no return value, check if we require a return value for
 207          * this predefined name. Either one return value is expected, or none,
 208          * for both methods and other objects.
 209          *
 210          * Exit now if there is no return object. Warning if one was expected.
 211          */
 212         if (!return_object) {
 213                 if (expected_btypes && (!(expected_btypes & ACPI_RTYPE_NONE))) {
 214                         ACPI_WARN_PREDEFINED((AE_INFO, info->full_pathname,
 215                                               ACPI_WARN_ALWAYS,
 216                                               "Missing expected return value"));
 217
 218                         return (AE_AML_NO_RETURN_VALUE);
 219                 }
 220         }
 221
 222         if (expected_btypes & ACPI_RTYPE_INTEGER) {
 223                 status = acpi_ns_convert_to_integer(return_object, &new_object);
 224                 if (ACPI_SUCCESS(status)) {
 225                         goto object_repaired;
 226                 }
 227         }
 228         if (expected_btypes & ACPI_RTYPE_STRING) {
 229                 status = acpi_ns_convert_to_string(return_object, &new_object);
 230                 if (ACPI_SUCCESS(status)) {
 231                         goto object_repaired;
 232                 }
 233         }
 234         if (expected_btypes & ACPI_RTYPE_BUFFER) {
 235                 status = acpi_ns_convert_to_buffer(return_object, &new_object);
 236                 if (ACPI_SUCCESS(status)) {
 237                         goto object_repaired;
 238                 }
 239         }
 240         if (expected_btypes & ACPI_RTYPE_PACKAGE) {
 241                 /*
 242                  * A package is expected. We will wrap the existing object with a
 243                  * new package object. It is often the case that if a variable-length
 244                  * package is required, but there is only a single object needed, the
 245                  * BIOS will return that object instead of wrapping it with a Package
 246                  * object. Note: after the wrapping, the package will be validated
 247                  * for correct contents (expected object type or types).
 248                  */
 249                 status =
 250                     acpi_ns_wrap_with_package(info, return_object, &new_object);
 251                 if (ACPI_SUCCESS(status)) {
 252                         /*
 253                          * The original object just had its reference count
 254                          * incremented for being inserted into the new package.
 255                          */
 256                         *return_object_ptr = new_object;        /* New Package object */
 257                         info->return_flags |= ACPI_OBJECT_REPAIRED;
 258                         return (AE_OK);
 259                 }
 260         }
 261
 262         /* We cannot repair this object */
 263
 264         return (AE_AML_OPERAND_TYPE);
 265
 266       object_repaired:
 267
 268         /* Object was successfully repaired */
 269
 270         if (package_index != ACPI_NOT_PACKAGE_ELEMENT) {
 271                 /*
 272                  * The original object is a package element. We need to
 273                  * decrement the reference count of the original object,
 274                  * for removing it from the package.
 275                  *
 276                  * However, if the original object was just wrapped with a
 277                  * package object as part of the repair, we don't need to
 278                  * change the reference count.
 279                  */
 280                 if (!(info->return_flags & ACPI_OBJECT_WRAPPED)) {
 281                         new_object->common.reference_count =
 282                             return_object->common.reference_count;
 283
 284                         if (return_object->common.reference_count > 1) {
 285                                 return_object->common.reference_count--;
 286                         }
 287                 }
 288
 289                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 290                                   "%s: Converted %s to expected %s at Package index %u\n",
 291                                   info->full_pathname,
 292                                   acpi_ut_get_object_type_name(return_object),
 293                                   acpi_ut_get_object_type_name(new_object),
 294                                   package_index));
 295         } else {
 296                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 297                                   "%s: Converted %s to expected %s\n",
 298                                   info->full_pathname,
 299                                   acpi_ut_get_object_type_name(return_object),
 300                                   acpi_ut_get_object_type_name(new_object)));
 301         }
 302
 303         /* Delete old object, install the new return object */
 304
 305         acpi_ut_remove_reference(return_object);
 306         *return_object_ptr = new_object;
 307         info->return_flags |= ACPI_OBJECT_REPAIRED;
 308         return (AE_OK);
 309 }
 310
 311 /******************************************************************************
 312  *
 313  * FUNCTION:    acpi_ns_match_simple_repair
 314  *
 315  * PARAMETERS:  node                - Namespace node for the method/object
 316  *              return_btype        - Object type that was returned
 317  *              package_index       - Index of object within parent package (if
 318  *                                    applicable - ACPI_NOT_PACKAGE_ELEMENT
 319  *                                    otherwise)
 320  *
 321  * RETURN:      Pointer to entry in repair table. NULL indicates not found.
 322  *
 323  * DESCRIPTION: Check an object name against the repairable object list.
 324  *
 325  *****************************************************************************/
 326
 327 static const struct acpi_simple_repair_info *acpi_ns_match_simple_repair(struct
 328                                                                          acpi_namespace_node
 329                                                                          *node,
 330                                                                          u32
 331                                                                          return_btype,
 332                                                                          u32
 333                                                                          package_index)
 334 {
 335         const struct acpi_simple_repair_info *this_name;
 336
 337         /* Search info table for a repairable predefined method/object name */
 338
 339         this_name = acpi_object_repair_info;
 340         while (this_name->object_converter) {
 341                 if (ACPI_COMPARE_NAME(node->name.ascii, this_name->name)) {
 342
 343                         /* Check if we can actually repair this name/type combination */
 344
 345                         if ((return_btype & this_name->unexpected_btypes) &&
 346                             (package_index == this_name->package_index)) {
 347                                 return (this_name);
 348                         }
 349
 350                         return (NULL);
 351                 }
 352                 this_name++;
 353         }
 354
 355         return (NULL);          /* Name was not found in the repair table */
 356 }
 357
 358 /*******************************************************************************
 359  *
 360  * FUNCTION:    acpi_ns_repair_null_element
 361  *
 362  * PARAMETERS:  info                - Method execution information block
 363  *              expected_btypes     - Object types expected
 364  *              package_index       - Index of object within parent package (if
 365  *                                    applicable - ACPI_NOT_PACKAGE_ELEMENT
 366  *                                    otherwise)
 367  *              return_object_ptr   - Pointer to the object returned from the
 368  *                                    evaluation of a method or object
 369  *
 370  * RETURN:      Status. AE_OK if repair was successful.
 371  *
 372  * DESCRIPTION: Attempt to repair a NULL element of a returned Package object.
 373  *
 374  ******************************************************************************/
 375
 376 acpi_status
 377 acpi_ns_repair_null_element(struct acpi_evaluate_info * info,
 378                             u32 expected_btypes,
 379                             u32 package_index,
 380                             union acpi_operand_object **return_object_ptr)
 381 {
 382         union acpi_operand_object *return_object = *return_object_ptr;
 383         union acpi_operand_object *new_object;
 384
 385         ACPI_FUNCTION_NAME(ns_repair_null_element);
 386
 387         /* No repair needed if return object is non-NULL */
 388
 389         if (return_object) {
 390                 return (AE_OK);
 391         }
 392
 393         /*
 394          * Attempt to repair a NULL element of a Package object. This applies to
 395          * predefined names that return a fixed-length package and each element
 396          * is required. It does not apply to variable-length packages where NULL
 397          * elements are allowed, especially at the end of the package.
 398          */
 399         if (expected_btypes & ACPI_RTYPE_INTEGER) {
 400
 401                 /* Need an integer - create a zero-value integer */
 402
 403                 new_object = acpi_ut_create_integer_object((u64)0);
 404         } else if (expected_btypes & ACPI_RTYPE_STRING) {
 405
 406                 /* Need a string - create a NULL string */
 407
 408                 new_object = acpi_ut_create_string_object(0);
 409         } else if (expected_btypes & ACPI_RTYPE_BUFFER) {
 410
 411                 /* Need a buffer - create a zero-length buffer */
 412
 413                 new_object = acpi_ut_create_buffer_object(0);
 414         } else {
 415                 /* Error for all other expected types */
 416
 417                 return (AE_AML_OPERAND_TYPE);
 418         }
 419
 420         if (!new_object) {
 421                 return (AE_NO_MEMORY);
 422         }
 423
 424         /* Set the reference count according to the parent Package object */
 425
 426         new_object->common.reference_count =
 427             info->parent_package->common.reference_count;
 428
 429         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 430                           "%s: Converted NULL package element to expected %s at index %u\n",
 431                           info->full_pathname,
 432                           acpi_ut_get_object_type_name(new_object),
 433                           package_index));
 434
 435         *return_object_ptr = new_object;
 436         info->return_flags |= ACPI_OBJECT_REPAIRED;
 437         return (AE_OK);
 438 }
 439
 440 /******************************************************************************
 441  *
 442  * FUNCTION:    acpi_ns_remove_null_elements
 443  *
 444  * PARAMETERS:  info                - Method execution information block
 445  *              package_type        - An acpi_return_package_types value
 446  *              obj_desc            - A Package object
 447  *
 448  * RETURN:      None.
 449  *
 450  * DESCRIPTION: Remove all NULL package elements from packages that contain
 451  *              a variable number of sub-packages. For these types of
 452  *              packages, NULL elements can be safely removed.
 453  *
 454  *****************************************************************************/
 455
 456 void
 457 acpi_ns_remove_null_elements(struct acpi_evaluate_info *info,
 458                              u8 package_type,
 459                              union acpi_operand_object *obj_desc)
 460 {
 461         union acpi_operand_object **source;
 462         union acpi_operand_object **dest;
 463         u32 count;
 464         u32 new_count;
 465         u32 i;
 466
 467         ACPI_FUNCTION_NAME(ns_remove_null_elements);
 468
 469         /*
 470          * We can safely remove all NULL elements from these package types:
 471          * PTYPE1_VAR packages contain a variable number of simple data types.
 472          * PTYPE2 packages contain a variable number of sub-packages.
 473          */
 474         switch (package_type) {
 475         case ACPI_PTYPE1_VAR:
 476         case ACPI_PTYPE2:
 477         case ACPI_PTYPE2_COUNT:
 478         case ACPI_PTYPE2_PKG_COUNT:
 479         case ACPI_PTYPE2_FIXED:
 480         case ACPI_PTYPE2_MIN:
 481         case ACPI_PTYPE2_REV_FIXED:
 482         case ACPI_PTYPE2_FIX_VAR:
 483
 484                 break;
 485
 486         default:
 487         case ACPI_PTYPE1_FIXED:
 488         case ACPI_PTYPE1_OPTION:
 489                 return;
 490         }
 491
 492         count = obj_desc->package.count;
 493         new_count = count;
 494
 495         source = obj_desc->package.elements;
 496         dest = source;
 497
 498         /* Examine all elements of the package object, remove nulls */
 499
 500         for (i = 0; i < count; i++) {
 501                 if (!*source) {
 502                         new_count--;
 503                 } else {
 504                         *dest = *source;
 505                         dest++;
 506                 }
 507                 source++;
 508         }
 509
 510         /* Update parent package if any null elements were removed */
 511
 512         if (new_count < count) {
 513                 ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 514                                   "%s: Found and removed %u NULL elements\n",
 515                                   info->full_pathname, (count - new_count)));
 516
 517                 /* NULL terminate list and update the package count */
 518
 519                 *dest = NULL;
 520                 obj_desc->package.count = new_count;
 521         }
 522 }
 523
 524 /*******************************************************************************
 525  *
 526  * FUNCTION:    acpi_ns_wrap_with_package
 527  *
 528  * PARAMETERS:  info                - Method execution information block
 529  *              original_object     - Pointer to the object to repair.
 530  *              obj_desc_ptr        - The new package object is returned here
 531  *
 532  * RETURN:      Status, new object in *obj_desc_ptr
 533  *
 534  * DESCRIPTION: Repair a common problem with objects that are defined to
 535  *              return a variable-length Package of sub-objects. If there is
 536  *              only one sub-object, some BIOS code mistakenly simply declares
 537  *              the single object instead of a Package with one sub-object.
 538  *              This function attempts to repair this error by wrapping a
 539  *              Package object around the original object, creating the
 540  *              correct and expected Package with one sub-object.
 541  *
 542  *              Names that can be repaired in this manner include:
 543  *              _ALR, _CSD, _HPX, _MLS, _PLD, _PRT, _PSS, _TRT, _TSS,
 544  *              _BCL, _DOD, _FIX, _Sx
 545  *
 546  ******************************************************************************/
 547
 548 acpi_status
 549 acpi_ns_wrap_with_package(struct acpi_evaluate_info *info,
 550                           union acpi_operand_object *original_object,
 551                           union acpi_operand_object **obj_desc_ptr)
 552 {
 553         union acpi_operand_object *pkg_obj_desc;
 554
 555         ACPI_FUNCTION_NAME(ns_wrap_with_package);
 556
 557         /*
 558          * Create the new outer package and populate it. The new package will
 559          * have a single element, the lone sub-object.
 560          */
 561         pkg_obj_desc = acpi_ut_create_package_object(1);
 562         if (!pkg_obj_desc) {
 563                 return (AE_NO_MEMORY);
 564         }
 565
 566         pkg_obj_desc->package.elements[0] = original_object;
 567
 568         ACPI_DEBUG_PRINT((ACPI_DB_REPAIR,
 569                           "%s: Wrapped %s with expected Package object\n",
 570                           info->full_pathname,
 571                           acpi_ut_get_object_type_name(original_object)));
 572
 573         /* Return the new object in the object pointer */
 574
 575         *obj_desc_ptr = pkg_obj_desc;
 576         info->return_flags |= ACPI_OBJECT_REPAIRED | ACPI_OBJECT_WRAPPED;
 577         return (AE_OK);
 578 }