2 * ec.c - ACPI Embedded Controller Driver (v3)
4 * Copyright (C) 2001-2015 Intel Corporation
5 * Author: 2014, 2015 Lv Zheng <lv.zheng@intel.com>
6 * 2006, 2007 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
7 * 2006 Denis Sadykov <denis.m.sadykov@intel.com>
8 * 2004 Luming Yu <luming.yu@intel.com>
9 * 2001, 2002 Andy Grover <andrew.grover@intel.com>
10 * 2001, 2002 Paul Diefenbaugh <paul.s.diefenbaugh@intel.com>
11 * Copyright (C) 2008 Alexey Starikovskiy <astarikovskiy@suse.de>
13 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
15 * This program is free software; you can redistribute it and/or modify
16 * it under the terms of the GNU General Public License as published by
17 * the Free Software Foundation; either version 2 of the License, or (at
18 * your option) any later version.
20 * This program is distributed in the hope that it will be useful, but
21 * WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
23 * General Public License for more details.
25 * ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
28 /* Uncomment next line to get verbose printout */
30 #define pr_fmt(fmt) "ACPI : EC: " fmt
32 #include <linux/kernel.h>
33 #include <linux/module.h>
34 #include <linux/init.h>
35 #include <linux/types.h>
36 #include <linux/delay.h>
37 #include <linux/interrupt.h>
38 #include <linux/list.h>
39 #include <linux/spinlock.h>
40 #include <linux/slab.h>
41 #include <linux/acpi.h>
42 #include <linux/dmi.h>
47 #define ACPI_EC_CLASS "embedded_controller"
48 #define ACPI_EC_DEVICE_NAME "Embedded Controller"
49 #define ACPI_EC_FILE_INFO "info"
51 /* EC status register */
52 #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */
53 #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */
54 #define ACPI_EC_FLAG_CMD 0x08 /* Input buffer contains a command */
55 #define ACPI_EC_FLAG_BURST 0x10 /* burst mode */
56 #define ACPI_EC_FLAG_SCI 0x20 /* EC-SCI occurred */
59 * The SCI_EVT clearing timing is not defined by the ACPI specification.
60 * This leads to lots of practical timing issues for the host EC driver.
61 * The following variations are defined (from the target EC firmware's
63 * STATUS: After indicating SCI_EVT edge triggered IRQ to the host, the
64 * target can clear SCI_EVT at any time so long as the host can see
65 * the indication by reading the status register (EC_SC). So the
66 * host should re-check SCI_EVT after the first time the SCI_EVT
67 * indication is seen, which is the same time the query request
68 * (QR_EC) is written to the command register (EC_CMD). SCI_EVT set
69 * at any later time could indicate another event. Normally such
70 * kind of EC firmware has implemented an event queue and will
71 * return 0x00 to indicate "no outstanding event".
72 * QUERY: After seeing the query request (QR_EC) written to the command
73 * register (EC_CMD) by the host and having prepared the responding
74 * event value in the data register (EC_DATA), the target can safely
75 * clear SCI_EVT because the target can confirm that the current
76 * event is being handled by the host. The host then should check
77 * SCI_EVT right after reading the event response from the data
79 * EVENT: After seeing the event response read from the data register
80 * (EC_DATA) by the host, the target can clear SCI_EVT. As the
81 * target requires time to notice the change in the data register
82 * (EC_DATA), the host may be required to wait additional guarding
83 * time before checking the SCI_EVT again. Such guarding may not be
84 * necessary if the host is notified via another IRQ.
86 #define ACPI_EC_EVT_TIMING_STATUS 0x00
87 #define ACPI_EC_EVT_TIMING_QUERY 0x01
88 #define ACPI_EC_EVT_TIMING_EVENT 0x02
92 ACPI_EC_COMMAND_READ
= 0x80,
93 ACPI_EC_COMMAND_WRITE
= 0x81,
94 ACPI_EC_BURST_ENABLE
= 0x82,
95 ACPI_EC_BURST_DISABLE
= 0x83,
96 ACPI_EC_COMMAND_QUERY
= 0x84,
99 #define ACPI_EC_DELAY 500 /* Wait 500ms max. during EC ops */
100 #define ACPI_EC_UDELAY_GLK 1000 /* Wait 1ms max. to get global lock */
101 #define ACPI_EC_UDELAY_POLL 550 /* Wait 1ms for EC transaction polling */
102 #define ACPI_EC_CLEAR_MAX 100 /* Maximum number of events to query
103 * when trying to clear the EC */
106 EC_FLAGS_QUERY_PENDING
, /* Query is pending */
107 EC_FLAGS_QUERY_GUARDING
, /* Guard for SCI_EVT check */
108 EC_FLAGS_HANDLERS_INSTALLED
, /* Handlers for GPE and
109 * OpReg are installed */
110 EC_FLAGS_STARTED
, /* Driver is started */
111 EC_FLAGS_STOPPED
, /* Driver is stopped */
112 EC_FLAGS_COMMAND_STORM
, /* GPE storms occurred to the
113 * current command processing */
116 #define ACPI_EC_COMMAND_POLL 0x01 /* Available for command byte */
117 #define ACPI_EC_COMMAND_COMPLETE 0x02 /* Completed last byte */
119 /* ec.c is compiled in acpi namespace so this shows up as acpi.ec_delay param */
120 static unsigned int ec_delay __read_mostly
= ACPI_EC_DELAY
;
121 module_param(ec_delay
, uint
, 0644);
122 MODULE_PARM_DESC(ec_delay
, "Timeout(ms) waited until an EC command completes");
124 static bool ec_busy_polling __read_mostly
;
125 module_param(ec_busy_polling
, bool, 0644);
126 MODULE_PARM_DESC(ec_busy_polling
, "Use busy polling to advance EC transaction");
128 static unsigned int ec_polling_guard __read_mostly
= ACPI_EC_UDELAY_POLL
;
129 module_param(ec_polling_guard
, uint
, 0644);
130 MODULE_PARM_DESC(ec_polling_guard
, "Guard time(us) between EC accesses in polling modes");
132 static unsigned int ec_event_clearing __read_mostly
= ACPI_EC_EVT_TIMING_QUERY
;
135 * If the number of false interrupts per one transaction exceeds
136 * this threshold, will think there is a GPE storm happened and
137 * will disable the GPE for normal transaction.
139 static unsigned int ec_storm_threshold __read_mostly
= 8;
140 module_param(ec_storm_threshold
, uint
, 0644);
141 MODULE_PARM_DESC(ec_storm_threshold
, "Maxim false GPE numbers not considered as GPE storm");
143 struct acpi_ec_query_handler
{
144 struct list_head node
;
145 acpi_ec_query_func func
;
155 unsigned short irq_count
;
164 struct acpi_ec_query
{
165 struct transaction transaction
;
166 struct work_struct work
;
167 struct acpi_ec_query_handler
*handler
;
170 static int acpi_ec_query(struct acpi_ec
*ec
, u8
*data
);
171 static void advance_transaction(struct acpi_ec
*ec
);
172 static void acpi_ec_event_handler(struct work_struct
*work
);
173 static void acpi_ec_event_processor(struct work_struct
*work
);
175 struct acpi_ec
*boot_ec
, *first_ec
;
176 EXPORT_SYMBOL(first_ec
);
178 static int EC_FLAGS_VALIDATE_ECDT
; /* ASUStec ECDTs need to be validated */
179 static int EC_FLAGS_SKIP_DSDT_SCAN
; /* Not all BIOS survive early DSDT scan */
180 static int EC_FLAGS_CLEAR_ON_RESUME
; /* Needs acpi_ec_clear() on boot/resume */
181 static int EC_FLAGS_QUERY_HANDSHAKE
; /* Needs QR_EC issued when SCI_EVT set */
183 /* --------------------------------------------------------------------------
185 * -------------------------------------------------------------------------- */
188 * Splitters used by the developers to track the boundary of the EC
189 * handling processes.
192 #define EC_DBG_SEP " "
193 #define EC_DBG_DRV "+++++"
194 #define EC_DBG_STM "====="
195 #define EC_DBG_REQ "*****"
196 #define EC_DBG_EVT "#####"
198 #define EC_DBG_SEP ""
205 #define ec_log_raw(fmt, ...) \
206 pr_info(fmt "\n", ##__VA_ARGS__)
207 #define ec_dbg_raw(fmt, ...) \
208 pr_debug(fmt "\n", ##__VA_ARGS__)
209 #define ec_log(filter, fmt, ...) \
210 ec_log_raw(filter EC_DBG_SEP fmt EC_DBG_SEP filter, ##__VA_ARGS__)
211 #define ec_dbg(filter, fmt, ...) \
212 ec_dbg_raw(filter EC_DBG_SEP fmt EC_DBG_SEP filter, ##__VA_ARGS__)
214 #define ec_log_drv(fmt, ...) \
215 ec_log(EC_DBG_DRV, fmt, ##__VA_ARGS__)
216 #define ec_dbg_drv(fmt, ...) \
217 ec_dbg(EC_DBG_DRV, fmt, ##__VA_ARGS__)
218 #define ec_dbg_stm(fmt, ...) \
219 ec_dbg(EC_DBG_STM, fmt, ##__VA_ARGS__)
220 #define ec_dbg_req(fmt, ...) \
221 ec_dbg(EC_DBG_REQ, fmt, ##__VA_ARGS__)
222 #define ec_dbg_evt(fmt, ...) \
223 ec_dbg(EC_DBG_EVT, fmt, ##__VA_ARGS__)
224 #define ec_dbg_ref(ec, fmt, ...) \
225 ec_dbg_raw("%lu: " fmt, ec->reference_count, ## __VA_ARGS__)
227 /* --------------------------------------------------------------------------
229 * -------------------------------------------------------------------------- */
231 static bool acpi_ec_started(struct acpi_ec
*ec
)
233 return test_bit(EC_FLAGS_STARTED
, &ec
->flags
) &&
234 !test_bit(EC_FLAGS_STOPPED
, &ec
->flags
);
237 static bool acpi_ec_flushed(struct acpi_ec
*ec
)
239 return ec
->reference_count
== 1;
242 /* --------------------------------------------------------------------------
244 * -------------------------------------------------------------------------- */
246 static inline u8
acpi_ec_read_status(struct acpi_ec
*ec
)
248 u8 x
= inb(ec
->command_addr
);
250 ec_dbg_raw("EC_SC(R) = 0x%2.2x "
251 "SCI_EVT=%d BURST=%d CMD=%d IBF=%d OBF=%d",
253 !!(x
& ACPI_EC_FLAG_SCI
),
254 !!(x
& ACPI_EC_FLAG_BURST
),
255 !!(x
& ACPI_EC_FLAG_CMD
),
256 !!(x
& ACPI_EC_FLAG_IBF
),
257 !!(x
& ACPI_EC_FLAG_OBF
));
261 static inline u8
acpi_ec_read_data(struct acpi_ec
*ec
)
263 u8 x
= inb(ec
->data_addr
);
265 ec
->timestamp
= jiffies
;
266 ec_dbg_raw("EC_DATA(R) = 0x%2.2x", x
);
270 static inline void acpi_ec_write_cmd(struct acpi_ec
*ec
, u8 command
)
272 ec_dbg_raw("EC_SC(W) = 0x%2.2x", command
);
273 outb(command
, ec
->command_addr
);
274 ec
->timestamp
= jiffies
;
277 static inline void acpi_ec_write_data(struct acpi_ec
*ec
, u8 data
)
279 ec_dbg_raw("EC_DATA(W) = 0x%2.2x", data
);
280 outb(data
, ec
->data_addr
);
281 ec
->timestamp
= jiffies
;
285 static const char *acpi_ec_cmd_string(u8 cmd
)
302 #define acpi_ec_cmd_string(cmd) "UNDEF"
305 /* --------------------------------------------------------------------------
307 * -------------------------------------------------------------------------- */
309 static inline bool acpi_ec_is_gpe_raised(struct acpi_ec
*ec
)
311 acpi_event_status gpe_status
= 0;
313 (void)acpi_get_gpe_status(NULL
, ec
->gpe
, &gpe_status
);
314 return (gpe_status
& ACPI_EVENT_FLAG_STATUS_SET
) ? true : false;
317 static inline void acpi_ec_enable_gpe(struct acpi_ec
*ec
, bool open
)
320 acpi_enable_gpe(NULL
, ec
->gpe
);
322 BUG_ON(ec
->reference_count
< 1);
323 acpi_set_gpe(NULL
, ec
->gpe
, ACPI_GPE_ENABLE
);
325 if (acpi_ec_is_gpe_raised(ec
)) {
327 * On some platforms, EN=1 writes cannot trigger GPE. So
328 * software need to manually trigger a pseudo GPE event on
331 ec_dbg_raw("Polling quirk");
332 advance_transaction(ec
);
336 static inline void acpi_ec_disable_gpe(struct acpi_ec
*ec
, bool close
)
339 acpi_disable_gpe(NULL
, ec
->gpe
);
341 BUG_ON(ec
->reference_count
< 1);
342 acpi_set_gpe(NULL
, ec
->gpe
, ACPI_GPE_DISABLE
);
346 static inline void acpi_ec_clear_gpe(struct acpi_ec
*ec
)
349 * GPE STS is a W1C register, which means:
350 * 1. Software can clear it without worrying about clearing other
351 * GPEs' STS bits when the hardware sets them in parallel.
352 * 2. As long as software can ensure only clearing it when it is
353 * set, hardware won't set it in parallel.
354 * So software can clear GPE in any contexts.
355 * Warning: do not move the check into advance_transaction() as the
356 * EC commands will be sent without GPE raised.
358 if (!acpi_ec_is_gpe_raised(ec
))
360 acpi_clear_gpe(NULL
, ec
->gpe
);
363 /* --------------------------------------------------------------------------
364 * Transaction Management
365 * -------------------------------------------------------------------------- */
367 static void acpi_ec_submit_request(struct acpi_ec
*ec
)
369 ec
->reference_count
++;
370 if (ec
->reference_count
== 1)
371 acpi_ec_enable_gpe(ec
, true);
374 static void acpi_ec_complete_request(struct acpi_ec
*ec
)
376 bool flushed
= false;
378 ec
->reference_count
--;
379 if (ec
->reference_count
== 0)
380 acpi_ec_disable_gpe(ec
, true);
381 flushed
= acpi_ec_flushed(ec
);
386 static void acpi_ec_set_storm(struct acpi_ec
*ec
, u8 flag
)
388 if (!test_bit(flag
, &ec
->flags
)) {
389 acpi_ec_disable_gpe(ec
, false);
390 ec_dbg_drv("Polling enabled");
391 set_bit(flag
, &ec
->flags
);
395 static void acpi_ec_clear_storm(struct acpi_ec
*ec
, u8 flag
)
397 if (test_bit(flag
, &ec
->flags
)) {
398 clear_bit(flag
, &ec
->flags
);
399 acpi_ec_enable_gpe(ec
, false);
400 ec_dbg_drv("Polling disabled");
405 * acpi_ec_submit_flushable_request() - Increase the reference count unless
406 * the flush operation is not in
410 * This function must be used before taking a new action that should hold
411 * the reference count. If this function returns false, then the action
412 * must be discarded or it will prevent the flush operation from being
415 static bool acpi_ec_submit_flushable_request(struct acpi_ec
*ec
)
417 if (!acpi_ec_started(ec
))
419 acpi_ec_submit_request(ec
);
423 static void acpi_ec_submit_query(struct acpi_ec
*ec
)
425 if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING
, &ec
->flags
)) {
426 ec_dbg_evt("Command(%s) submitted/blocked",
427 acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY
));
428 ec
->nr_pending_queries
++;
429 schedule_work(&ec
->work
);
433 static void acpi_ec_complete_query(struct acpi_ec
*ec
)
435 if (test_bit(EC_FLAGS_QUERY_PENDING
, &ec
->flags
)) {
436 clear_bit(EC_FLAGS_QUERY_PENDING
, &ec
->flags
);
437 ec_dbg_evt("Command(%s) unblocked",
438 acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY
));
442 static bool acpi_ec_guard_event(struct acpi_ec
*ec
)
444 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_STATUS
||
445 ec_event_clearing
== ACPI_EC_EVT_TIMING_QUERY
||
446 !test_bit(EC_FLAGS_QUERY_PENDING
, &ec
->flags
) ||
447 (ec
->curr
&& ec
->curr
->command
== ACPI_EC_COMMAND_QUERY
))
451 * Postpone the query submission to allow the firmware to proceed,
452 * we shouldn't check SCI_EVT before the firmware reflagging it.
457 static int ec_transaction_polled(struct acpi_ec
*ec
)
462 spin_lock_irqsave(&ec
->lock
, flags
);
463 if (ec
->curr
&& (ec
->curr
->flags
& ACPI_EC_COMMAND_POLL
))
465 spin_unlock_irqrestore(&ec
->lock
, flags
);
469 static int ec_transaction_completed(struct acpi_ec
*ec
)
474 spin_lock_irqsave(&ec
->lock
, flags
);
475 if (ec
->curr
&& (ec
->curr
->flags
& ACPI_EC_COMMAND_COMPLETE
))
477 spin_unlock_irqrestore(&ec
->lock
, flags
);
481 static inline void ec_transaction_transition(struct acpi_ec
*ec
, unsigned long flag
)
483 ec
->curr
->flags
|= flag
;
484 if (ec
->curr
->command
== ACPI_EC_COMMAND_QUERY
) {
485 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_STATUS
&&
486 flag
== ACPI_EC_COMMAND_POLL
)
487 acpi_ec_complete_query(ec
);
488 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_QUERY
&&
489 flag
== ACPI_EC_COMMAND_COMPLETE
)
490 acpi_ec_complete_query(ec
);
491 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_EVENT
&&
492 flag
== ACPI_EC_COMMAND_COMPLETE
)
493 set_bit(EC_FLAGS_QUERY_GUARDING
, &ec
->flags
);
497 static void advance_transaction(struct acpi_ec
*ec
)
499 struct transaction
*t
;
503 ec_dbg_stm("%s (%d)", in_interrupt() ? "IRQ" : "TASK",
506 * By always clearing STS before handling all indications, we can
507 * ensure a hardware STS 0->1 change after this clearing can always
508 * trigger a GPE interrupt.
510 acpi_ec_clear_gpe(ec
);
511 status
= acpi_ec_read_status(ec
);
514 * Another IRQ or a guarded polling mode advancement is detected,
515 * the next QR_EC submission is then allowed.
517 if (!t
|| !(t
->flags
& ACPI_EC_COMMAND_POLL
)) {
518 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_EVENT
&&
519 (!ec
->nr_pending_queries
||
520 test_bit(EC_FLAGS_QUERY_GUARDING
, &ec
->flags
))) {
521 clear_bit(EC_FLAGS_QUERY_GUARDING
, &ec
->flags
);
522 acpi_ec_complete_query(ec
);
527 if (t
->flags
& ACPI_EC_COMMAND_POLL
) {
528 if (t
->wlen
> t
->wi
) {
529 if ((status
& ACPI_EC_FLAG_IBF
) == 0)
530 acpi_ec_write_data(ec
, t
->wdata
[t
->wi
++]);
533 } else if (t
->rlen
> t
->ri
) {
534 if ((status
& ACPI_EC_FLAG_OBF
) == 1) {
535 t
->rdata
[t
->ri
++] = acpi_ec_read_data(ec
);
536 if (t
->rlen
== t
->ri
) {
537 ec_transaction_transition(ec
, ACPI_EC_COMMAND_COMPLETE
);
538 if (t
->command
== ACPI_EC_COMMAND_QUERY
)
539 ec_dbg_evt("Command(%s) completed by hardware",
540 acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY
));
545 } else if (t
->wlen
== t
->wi
&&
546 (status
& ACPI_EC_FLAG_IBF
) == 0) {
547 ec_transaction_transition(ec
, ACPI_EC_COMMAND_COMPLETE
);
552 if (EC_FLAGS_QUERY_HANDSHAKE
&&
553 !(status
& ACPI_EC_FLAG_SCI
) &&
554 (t
->command
== ACPI_EC_COMMAND_QUERY
)) {
555 ec_transaction_transition(ec
, ACPI_EC_COMMAND_POLL
);
556 t
->rdata
[t
->ri
++] = 0x00;
557 ec_transaction_transition(ec
, ACPI_EC_COMMAND_COMPLETE
);
558 ec_dbg_evt("Command(%s) completed by software",
559 acpi_ec_cmd_string(ACPI_EC_COMMAND_QUERY
));
561 } else if ((status
& ACPI_EC_FLAG_IBF
) == 0) {
562 acpi_ec_write_cmd(ec
, t
->command
);
563 ec_transaction_transition(ec
, ACPI_EC_COMMAND_POLL
);
570 * If SCI bit is set, then don't think it's a false IRQ
571 * otherwise will take a not handled IRQ as a false one.
573 if (!(status
& ACPI_EC_FLAG_SCI
)) {
574 if (in_interrupt() && t
) {
575 if (t
->irq_count
< ec_storm_threshold
)
577 /* Allow triggering on 0 threshold */
578 if (t
->irq_count
== ec_storm_threshold
)
579 acpi_ec_set_storm(ec
, EC_FLAGS_COMMAND_STORM
);
583 if (status
& ACPI_EC_FLAG_SCI
)
584 acpi_ec_submit_query(ec
);
585 if (wakeup
&& in_interrupt())
589 static void start_transaction(struct acpi_ec
*ec
)
591 ec
->curr
->irq_count
= ec
->curr
->wi
= ec
->curr
->ri
= 0;
595 static int ec_guard(struct acpi_ec
*ec
)
597 unsigned long guard
= usecs_to_jiffies(ec_polling_guard
);
598 unsigned long timeout
= ec
->timestamp
+ guard
;
601 if (ec_busy_polling
) {
602 /* Perform busy polling */
603 if (ec_transaction_completed(ec
))
605 udelay(jiffies_to_usecs(guard
));
608 * Perform wait polling
610 * For SCI_EVT clearing timing of "event",
611 * performing guarding before re-checking the
612 * SCI_EVT. Otherwise, such guarding is not needed
613 * due to the old practices.
615 if (!ec_transaction_polled(ec
) &&
616 !acpi_ec_guard_event(ec
))
618 if (wait_event_timeout(ec
->wait
,
619 ec_transaction_completed(ec
),
623 /* Guard the register accesses for the polling modes */
624 } while (time_before(jiffies
, timeout
));
628 static int ec_poll(struct acpi_ec
*ec
)
631 int repeat
= 5; /* number of command restarts */
634 unsigned long delay
= jiffies
+
635 msecs_to_jiffies(ec_delay
);
639 spin_lock_irqsave(&ec
->lock
, flags
);
640 advance_transaction(ec
);
641 spin_unlock_irqrestore(&ec
->lock
, flags
);
642 } while (time_before(jiffies
, delay
));
643 pr_debug("controller reset, restart transaction\n");
644 spin_lock_irqsave(&ec
->lock
, flags
);
645 start_transaction(ec
);
646 spin_unlock_irqrestore(&ec
->lock
, flags
);
651 static int acpi_ec_transaction_unlocked(struct acpi_ec
*ec
,
652 struct transaction
*t
)
657 /* start transaction */
658 spin_lock_irqsave(&ec
->lock
, tmp
);
659 /* Enable GPE for command processing (IBF=0/OBF=1) */
660 if (!acpi_ec_submit_flushable_request(ec
)) {
664 ec_dbg_ref(ec
, "Increase command");
665 /* following two actions should be kept atomic */
667 ec_dbg_req("Command(%s) started", acpi_ec_cmd_string(t
->command
));
668 start_transaction(ec
);
669 spin_unlock_irqrestore(&ec
->lock
, tmp
);
673 spin_lock_irqsave(&ec
->lock
, tmp
);
674 if (t
->irq_count
== ec_storm_threshold
)
675 acpi_ec_clear_storm(ec
, EC_FLAGS_COMMAND_STORM
);
676 ec_dbg_req("Command(%s) stopped", acpi_ec_cmd_string(t
->command
));
678 /* Disable GPE for command processing (IBF=0/OBF=1) */
679 acpi_ec_complete_request(ec
);
680 ec_dbg_ref(ec
, "Decrease command");
682 spin_unlock_irqrestore(&ec
->lock
, tmp
);
686 static int acpi_ec_transaction(struct acpi_ec
*ec
, struct transaction
*t
)
691 if (!ec
|| (!t
) || (t
->wlen
&& !t
->wdata
) || (t
->rlen
&& !t
->rdata
))
694 memset(t
->rdata
, 0, t
->rlen
);
696 mutex_lock(&ec
->mutex
);
697 if (ec
->global_lock
) {
698 status
= acpi_acquire_global_lock(ACPI_EC_UDELAY_GLK
, &glk
);
699 if (ACPI_FAILURE(status
)) {
705 status
= acpi_ec_transaction_unlocked(ec
, t
);
708 acpi_release_global_lock(glk
);
710 mutex_unlock(&ec
->mutex
);
714 static int acpi_ec_burst_enable(struct acpi_ec
*ec
)
717 struct transaction t
= {.command
= ACPI_EC_BURST_ENABLE
,
718 .wdata
= NULL
, .rdata
= &d
,
719 .wlen
= 0, .rlen
= 1};
721 return acpi_ec_transaction(ec
, &t
);
724 static int acpi_ec_burst_disable(struct acpi_ec
*ec
)
726 struct transaction t
= {.command
= ACPI_EC_BURST_DISABLE
,
727 .wdata
= NULL
, .rdata
= NULL
,
728 .wlen
= 0, .rlen
= 0};
730 return (acpi_ec_read_status(ec
) & ACPI_EC_FLAG_BURST
) ?
731 acpi_ec_transaction(ec
, &t
) : 0;
734 static int acpi_ec_read(struct acpi_ec
*ec
, u8 address
, u8
*data
)
738 struct transaction t
= {.command
= ACPI_EC_COMMAND_READ
,
739 .wdata
= &address
, .rdata
= &d
,
740 .wlen
= 1, .rlen
= 1};
742 result
= acpi_ec_transaction(ec
, &t
);
747 static int acpi_ec_write(struct acpi_ec
*ec
, u8 address
, u8 data
)
749 u8 wdata
[2] = { address
, data
};
750 struct transaction t
= {.command
= ACPI_EC_COMMAND_WRITE
,
751 .wdata
= wdata
, .rdata
= NULL
,
752 .wlen
= 2, .rlen
= 0};
754 return acpi_ec_transaction(ec
, &t
);
757 int ec_read(u8 addr
, u8
*val
)
765 err
= acpi_ec_read(first_ec
, addr
, &temp_data
);
773 EXPORT_SYMBOL(ec_read
);
775 int ec_write(u8 addr
, u8 val
)
782 err
= acpi_ec_write(first_ec
, addr
, val
);
786 EXPORT_SYMBOL(ec_write
);
788 int ec_transaction(u8 command
,
789 const u8
*wdata
, unsigned wdata_len
,
790 u8
*rdata
, unsigned rdata_len
)
792 struct transaction t
= {.command
= command
,
793 .wdata
= wdata
, .rdata
= rdata
,
794 .wlen
= wdata_len
, .rlen
= rdata_len
};
799 return acpi_ec_transaction(first_ec
, &t
);
801 EXPORT_SYMBOL(ec_transaction
);
803 /* Get the handle to the EC device */
804 acpi_handle
ec_get_handle(void)
808 return first_ec
->handle
;
810 EXPORT_SYMBOL(ec_get_handle
);
813 * Process _Q events that might have accumulated in the EC.
814 * Run with locked ec mutex.
816 static void acpi_ec_clear(struct acpi_ec
*ec
)
821 for (i
= 0; i
< ACPI_EC_CLEAR_MAX
; i
++) {
822 status
= acpi_ec_query(ec
, &value
);
823 if (status
|| !value
)
827 if (unlikely(i
== ACPI_EC_CLEAR_MAX
))
828 pr_warn("Warning: Maximum of %d stale EC events cleared\n", i
);
830 pr_info("%d stale EC events cleared\n", i
);
833 static void acpi_ec_start(struct acpi_ec
*ec
, bool resuming
)
837 spin_lock_irqsave(&ec
->lock
, flags
);
838 if (!test_and_set_bit(EC_FLAGS_STARTED
, &ec
->flags
)) {
839 ec_dbg_drv("Starting EC");
840 /* Enable GPE for event processing (SCI_EVT=1) */
842 acpi_ec_submit_request(ec
);
843 ec_dbg_ref(ec
, "Increase driver");
845 ec_log_drv("EC started");
847 spin_unlock_irqrestore(&ec
->lock
, flags
);
850 static bool acpi_ec_stopped(struct acpi_ec
*ec
)
855 spin_lock_irqsave(&ec
->lock
, flags
);
856 flushed
= acpi_ec_flushed(ec
);
857 spin_unlock_irqrestore(&ec
->lock
, flags
);
861 static void acpi_ec_stop(struct acpi_ec
*ec
, bool suspending
)
865 spin_lock_irqsave(&ec
->lock
, flags
);
866 if (acpi_ec_started(ec
)) {
867 ec_dbg_drv("Stopping EC");
868 set_bit(EC_FLAGS_STOPPED
, &ec
->flags
);
869 spin_unlock_irqrestore(&ec
->lock
, flags
);
870 wait_event(ec
->wait
, acpi_ec_stopped(ec
));
871 spin_lock_irqsave(&ec
->lock
, flags
);
872 /* Disable GPE for event processing (SCI_EVT=1) */
874 acpi_ec_complete_request(ec
);
875 ec_dbg_ref(ec
, "Decrease driver");
877 clear_bit(EC_FLAGS_STARTED
, &ec
->flags
);
878 clear_bit(EC_FLAGS_STOPPED
, &ec
->flags
);
879 ec_log_drv("EC stopped");
881 spin_unlock_irqrestore(&ec
->lock
, flags
);
884 void acpi_ec_block_transactions(void)
886 struct acpi_ec
*ec
= first_ec
;
891 mutex_lock(&ec
->mutex
);
892 /* Prevent transactions from being carried out */
893 acpi_ec_stop(ec
, true);
894 mutex_unlock(&ec
->mutex
);
897 void acpi_ec_unblock_transactions(void)
899 struct acpi_ec
*ec
= first_ec
;
904 /* Allow transactions to be carried out again */
905 acpi_ec_start(ec
, true);
907 if (EC_FLAGS_CLEAR_ON_RESUME
)
911 void acpi_ec_unblock_transactions_early(void)
914 * Allow transactions to happen again (this function is called from
915 * atomic context during wakeup, so we don't need to acquire the mutex).
918 acpi_ec_start(first_ec
, true);
921 /* --------------------------------------------------------------------------
923 -------------------------------------------------------------------------- */
924 static struct acpi_ec_query_handler
*
925 acpi_ec_get_query_handler(struct acpi_ec_query_handler
*handler
)
928 kref_get(&handler
->kref
);
932 static void acpi_ec_query_handler_release(struct kref
*kref
)
934 struct acpi_ec_query_handler
*handler
=
935 container_of(kref
, struct acpi_ec_query_handler
, kref
);
940 static void acpi_ec_put_query_handler(struct acpi_ec_query_handler
*handler
)
942 kref_put(&handler
->kref
, acpi_ec_query_handler_release
);
945 int acpi_ec_add_query_handler(struct acpi_ec
*ec
, u8 query_bit
,
946 acpi_handle handle
, acpi_ec_query_func func
,
949 struct acpi_ec_query_handler
*handler
=
950 kzalloc(sizeof(struct acpi_ec_query_handler
), GFP_KERNEL
);
955 handler
->query_bit
= query_bit
;
956 handler
->handle
= handle
;
957 handler
->func
= func
;
958 handler
->data
= data
;
959 mutex_lock(&ec
->mutex
);
960 kref_init(&handler
->kref
);
961 list_add(&handler
->node
, &ec
->list
);
962 mutex_unlock(&ec
->mutex
);
965 EXPORT_SYMBOL_GPL(acpi_ec_add_query_handler
);
967 void acpi_ec_remove_query_handler(struct acpi_ec
*ec
, u8 query_bit
)
969 struct acpi_ec_query_handler
*handler
, *tmp
;
970 LIST_HEAD(free_list
);
972 mutex_lock(&ec
->mutex
);
973 list_for_each_entry_safe(handler
, tmp
, &ec
->list
, node
) {
974 if (query_bit
== handler
->query_bit
) {
975 list_del_init(&handler
->node
);
976 list_add(&handler
->node
, &free_list
);
979 mutex_unlock(&ec
->mutex
);
980 list_for_each_entry_safe(handler
, tmp
, &free_list
, node
)
981 acpi_ec_put_query_handler(handler
);
983 EXPORT_SYMBOL_GPL(acpi_ec_remove_query_handler
);
985 static struct acpi_ec_query
*acpi_ec_create_query(u8
*pval
)
987 struct acpi_ec_query
*q
;
988 struct transaction
*t
;
990 q
= kzalloc(sizeof (struct acpi_ec_query
), GFP_KERNEL
);
993 INIT_WORK(&q
->work
, acpi_ec_event_processor
);
995 t
->command
= ACPI_EC_COMMAND_QUERY
;
1001 static void acpi_ec_delete_query(struct acpi_ec_query
*q
)
1005 acpi_ec_put_query_handler(q
->handler
);
1010 static void acpi_ec_event_processor(struct work_struct
*work
)
1012 struct acpi_ec_query
*q
= container_of(work
, struct acpi_ec_query
, work
);
1013 struct acpi_ec_query_handler
*handler
= q
->handler
;
1015 ec_dbg_evt("Query(0x%02x) started", handler
->query_bit
);
1017 handler
->func(handler
->data
);
1018 else if (handler
->handle
)
1019 acpi_evaluate_object(handler
->handle
, NULL
, NULL
, NULL
);
1020 ec_dbg_evt("Query(0x%02x) stopped", handler
->query_bit
);
1021 acpi_ec_delete_query(q
);
1024 static int acpi_ec_query(struct acpi_ec
*ec
, u8
*data
)
1028 struct acpi_ec_query_handler
*handler
;
1029 struct acpi_ec_query
*q
;
1031 q
= acpi_ec_create_query(&value
);
1036 * Query the EC to find out which _Qxx method we need to evaluate.
1037 * Note that successful completion of the query causes the ACPI_EC_SCI
1038 * bit to be cleared (and thus clearing the interrupt source).
1040 result
= acpi_ec_transaction(ec
, &q
->transaction
);
1046 mutex_lock(&ec
->mutex
);
1047 list_for_each_entry(handler
, &ec
->list
, node
) {
1048 if (value
== handler
->query_bit
) {
1049 q
->handler
= acpi_ec_get_query_handler(handler
);
1050 ec_dbg_evt("Query(0x%02x) scheduled",
1051 q
->handler
->query_bit
);
1053 * It is reported that _Qxx are evaluated in a
1054 * parallel way on Windows:
1055 * https://bugzilla.kernel.org/show_bug.cgi?id=94411
1057 if (!schedule_work(&q
->work
))
1062 mutex_unlock(&ec
->mutex
);
1066 acpi_ec_delete_query(q
);
1072 static void acpi_ec_check_event(struct acpi_ec
*ec
)
1074 unsigned long flags
;
1076 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_EVENT
) {
1078 spin_lock_irqsave(&ec
->lock
, flags
);
1080 * Take care of the SCI_EVT unless no one else is
1081 * taking care of it.
1084 advance_transaction(ec
);
1085 spin_unlock_irqrestore(&ec
->lock
, flags
);
1090 static void acpi_ec_event_handler(struct work_struct
*work
)
1092 unsigned long flags
;
1093 struct acpi_ec
*ec
= container_of(work
, struct acpi_ec
, work
);
1095 ec_dbg_evt("Event started");
1097 spin_lock_irqsave(&ec
->lock
, flags
);
1098 while (ec
->nr_pending_queries
) {
1099 spin_unlock_irqrestore(&ec
->lock
, flags
);
1100 (void)acpi_ec_query(ec
, NULL
);
1101 spin_lock_irqsave(&ec
->lock
, flags
);
1102 ec
->nr_pending_queries
--;
1104 * Before exit, make sure that this work item can be
1105 * scheduled again. There might be QR_EC failures, leaving
1106 * EC_FLAGS_QUERY_PENDING uncleared and preventing this work
1107 * item from being scheduled again.
1109 if (!ec
->nr_pending_queries
) {
1110 if (ec_event_clearing
== ACPI_EC_EVT_TIMING_STATUS
||
1111 ec_event_clearing
== ACPI_EC_EVT_TIMING_QUERY
)
1112 acpi_ec_complete_query(ec
);
1115 spin_unlock_irqrestore(&ec
->lock
, flags
);
1117 ec_dbg_evt("Event stopped");
1119 acpi_ec_check_event(ec
);
1122 static u32
acpi_ec_gpe_handler(acpi_handle gpe_device
,
1123 u32 gpe_number
, void *data
)
1125 unsigned long flags
;
1126 struct acpi_ec
*ec
= data
;
1128 spin_lock_irqsave(&ec
->lock
, flags
);
1129 advance_transaction(ec
);
1130 spin_unlock_irqrestore(&ec
->lock
, flags
);
1131 return ACPI_INTERRUPT_HANDLED
;
1134 /* --------------------------------------------------------------------------
1135 * Address Space Management
1136 * -------------------------------------------------------------------------- */
1139 acpi_ec_space_handler(u32 function
, acpi_physical_address address
,
1140 u32 bits
, u64
*value64
,
1141 void *handler_context
, void *region_context
)
1143 struct acpi_ec
*ec
= handler_context
;
1144 int result
= 0, i
, bytes
= bits
/ 8;
1145 u8
*value
= (u8
*)value64
;
1147 if ((address
> 0xFF) || !value
|| !handler_context
)
1148 return AE_BAD_PARAMETER
;
1150 if (function
!= ACPI_READ
&& function
!= ACPI_WRITE
)
1151 return AE_BAD_PARAMETER
;
1153 if (ec_busy_polling
|| bits
> 8)
1154 acpi_ec_burst_enable(ec
);
1156 for (i
= 0; i
< bytes
; ++i
, ++address
, ++value
)
1157 result
= (function
== ACPI_READ
) ?
1158 acpi_ec_read(ec
, address
, value
) :
1159 acpi_ec_write(ec
, address
, *value
);
1161 if (ec_busy_polling
|| bits
> 8)
1162 acpi_ec_burst_disable(ec
);
1166 return AE_BAD_PARAMETER
;
1168 return AE_NOT_FOUND
;
1176 /* --------------------------------------------------------------------------
1178 * -------------------------------------------------------------------------- */
1181 ec_parse_io_ports(struct acpi_resource
*resource
, void *context
);
1183 static struct acpi_ec
*make_acpi_ec(void)
1185 struct acpi_ec
*ec
= kzalloc(sizeof(struct acpi_ec
), GFP_KERNEL
);
1189 ec
->flags
= 1 << EC_FLAGS_QUERY_PENDING
;
1190 mutex_init(&ec
->mutex
);
1191 init_waitqueue_head(&ec
->wait
);
1192 INIT_LIST_HEAD(&ec
->list
);
1193 spin_lock_init(&ec
->lock
);
1194 INIT_WORK(&ec
->work
, acpi_ec_event_handler
);
1195 ec
->timestamp
= jiffies
;
1200 acpi_ec_register_query_methods(acpi_handle handle
, u32 level
,
1201 void *context
, void **return_value
)
1204 struct acpi_buffer buffer
= { sizeof(node_name
), node_name
};
1205 struct acpi_ec
*ec
= context
;
1209 status
= acpi_get_name(handle
, ACPI_SINGLE_NAME
, &buffer
);
1211 if (ACPI_SUCCESS(status
) && sscanf(node_name
, "_Q%x", &value
) == 1)
1212 acpi_ec_add_query_handler(ec
, value
, handle
, NULL
, NULL
);
1217 ec_parse_device(acpi_handle handle
, u32 Level
, void *context
, void **retval
)
1220 unsigned long long tmp
= 0;
1221 struct acpi_ec
*ec
= context
;
1223 /* clear addr values, ec_parse_io_ports depend on it */
1224 ec
->command_addr
= ec
->data_addr
= 0;
1226 status
= acpi_walk_resources(handle
, METHOD_NAME__CRS
,
1227 ec_parse_io_ports
, ec
);
1228 if (ACPI_FAILURE(status
))
1231 /* Get GPE bit assignment (EC events). */
1232 /* TODO: Add support for _GPE returning a package */
1233 status
= acpi_evaluate_integer(handle
, "_GPE", NULL
, &tmp
);
1234 if (ACPI_FAILURE(status
))
1237 /* Use the global lock for all EC transactions? */
1239 acpi_evaluate_integer(handle
, "_GLK", NULL
, &tmp
);
1240 ec
->global_lock
= tmp
;
1241 ec
->handle
= handle
;
1242 return AE_CTRL_TERMINATE
;
1245 static int ec_install_handlers(struct acpi_ec
*ec
)
1249 if (test_bit(EC_FLAGS_HANDLERS_INSTALLED
, &ec
->flags
))
1251 status
= acpi_install_gpe_raw_handler(NULL
, ec
->gpe
,
1252 ACPI_GPE_EDGE_TRIGGERED
,
1253 &acpi_ec_gpe_handler
, ec
);
1254 if (ACPI_FAILURE(status
))
1257 acpi_ec_start(ec
, false);
1258 status
= acpi_install_address_space_handler(ec
->handle
,
1260 &acpi_ec_space_handler
,
1262 if (ACPI_FAILURE(status
)) {
1263 if (status
== AE_NOT_FOUND
) {
1265 * Maybe OS fails in evaluating the _REG object.
1266 * The AE_NOT_FOUND error will be ignored and OS
1267 * continue to initialize EC.
1269 pr_err("Fail in evaluating the _REG object"
1270 " of EC device. Broken bios is suspected.\n");
1272 acpi_ec_stop(ec
, false);
1273 acpi_remove_gpe_handler(NULL
, ec
->gpe
,
1274 &acpi_ec_gpe_handler
);
1279 set_bit(EC_FLAGS_HANDLERS_INSTALLED
, &ec
->flags
);
1283 static void ec_remove_handlers(struct acpi_ec
*ec
)
1285 if (!test_bit(EC_FLAGS_HANDLERS_INSTALLED
, &ec
->flags
))
1287 acpi_ec_stop(ec
, false);
1288 if (ACPI_FAILURE(acpi_remove_address_space_handler(ec
->handle
,
1289 ACPI_ADR_SPACE_EC
, &acpi_ec_space_handler
)))
1290 pr_err("failed to remove space handler\n");
1291 if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL
, ec
->gpe
,
1292 &acpi_ec_gpe_handler
)))
1293 pr_err("failed to remove gpe handler\n");
1294 clear_bit(EC_FLAGS_HANDLERS_INSTALLED
, &ec
->flags
);
1297 static int acpi_ec_add(struct acpi_device
*device
)
1299 struct acpi_ec
*ec
= NULL
;
1302 strcpy(acpi_device_name(device
), ACPI_EC_DEVICE_NAME
);
1303 strcpy(acpi_device_class(device
), ACPI_EC_CLASS
);
1305 /* Check for boot EC */
1307 (boot_ec
->handle
== device
->handle
||
1308 boot_ec
->handle
== ACPI_ROOT_OBJECT
)) {
1312 ec
= make_acpi_ec();
1316 if (ec_parse_device(device
->handle
, 0, ec
, NULL
) !=
1317 AE_CTRL_TERMINATE
) {
1322 /* Find and register all query methods */
1323 acpi_walk_namespace(ACPI_TYPE_METHOD
, ec
->handle
, 1,
1324 acpi_ec_register_query_methods
, NULL
, ec
, NULL
);
1328 device
->driver_data
= ec
;
1330 ret
= !!request_region(ec
->data_addr
, 1, "EC data");
1331 WARN(!ret
, "Could not request EC data io port 0x%lx", ec
->data_addr
);
1332 ret
= !!request_region(ec
->command_addr
, 1, "EC cmd");
1333 WARN(!ret
, "Could not request EC cmd io port 0x%lx", ec
->command_addr
);
1335 pr_info("GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n",
1336 ec
->gpe
, ec
->command_addr
, ec
->data_addr
);
1338 ret
= ec_install_handlers(ec
);
1340 /* Reprobe devices depending on the EC */
1341 acpi_walk_dep_device_list(ec
->handle
);
1343 /* EC is fully operational, allow queries */
1344 clear_bit(EC_FLAGS_QUERY_PENDING
, &ec
->flags
);
1346 /* Clear stale _Q events if hardware might require that */
1347 if (EC_FLAGS_CLEAR_ON_RESUME
)
1352 static int acpi_ec_remove(struct acpi_device
*device
)
1355 struct acpi_ec_query_handler
*handler
, *tmp
;
1360 ec
= acpi_driver_data(device
);
1361 ec_remove_handlers(ec
);
1362 mutex_lock(&ec
->mutex
);
1363 list_for_each_entry_safe(handler
, tmp
, &ec
->list
, node
) {
1364 list_del(&handler
->node
);
1367 mutex_unlock(&ec
->mutex
);
1368 release_region(ec
->data_addr
, 1);
1369 release_region(ec
->command_addr
, 1);
1370 device
->driver_data
= NULL
;
1378 ec_parse_io_ports(struct acpi_resource
*resource
, void *context
)
1380 struct acpi_ec
*ec
= context
;
1382 if (resource
->type
!= ACPI_RESOURCE_TYPE_IO
)
1386 * The first address region returned is the data port, and
1387 * the second address region returned is the status/command
1390 if (ec
->data_addr
== 0)
1391 ec
->data_addr
= resource
->data
.io
.minimum
;
1392 else if (ec
->command_addr
== 0)
1393 ec
->command_addr
= resource
->data
.io
.minimum
;
1395 return AE_CTRL_TERMINATE
;
1400 int __init
acpi_boot_ec_enable(void)
1402 if (!boot_ec
|| test_bit(EC_FLAGS_HANDLERS_INSTALLED
, &boot_ec
->flags
))
1404 if (!ec_install_handlers(boot_ec
)) {
1411 static const struct acpi_device_id ec_device_ids
[] = {
1416 /* Some BIOS do not survive early DSDT scan, skip it */
1417 static int ec_skip_dsdt_scan(const struct dmi_system_id
*id
)
1419 EC_FLAGS_SKIP_DSDT_SCAN
= 1;
1423 /* ASUStek often supplies us with broken ECDT, validate it */
1424 static int ec_validate_ecdt(const struct dmi_system_id
*id
)
1426 EC_FLAGS_VALIDATE_ECDT
= 1;
1432 * Some EC firmware variations refuses to respond QR_EC when SCI_EVT is not
1433 * set, for which case, we complete the QR_EC without issuing it to the
1435 * https://bugzilla.kernel.org/show_bug.cgi?id=82611
1436 * https://bugzilla.kernel.org/show_bug.cgi?id=97381
1438 static int ec_flag_query_handshake(const struct dmi_system_id
*id
)
1440 pr_debug("Detected the EC firmware requiring QR_EC issued when SCI_EVT set\n");
1441 EC_FLAGS_QUERY_HANDSHAKE
= 1;
1447 * On some hardware it is necessary to clear events accumulated by the EC during
1448 * sleep. These ECs stop reporting GPEs until they are manually polled, if too
1449 * many events are accumulated. (e.g. Samsung Series 5/9 notebooks)
1451 * https://bugzilla.kernel.org/show_bug.cgi?id=44161
1453 * Ideally, the EC should also be instructed NOT to accumulate events during
1454 * sleep (which Windows seems to do somehow), but the interface to control this
1455 * behaviour is not known at this time.
1457 * Models known to be affected are Samsung 530Uxx/535Uxx/540Uxx/550Pxx/900Xxx,
1458 * however it is very likely that other Samsung models are affected.
1460 * On systems which don't accumulate _Q events during sleep, this extra check
1461 * should be harmless.
1463 static int ec_clear_on_resume(const struct dmi_system_id
*id
)
1465 pr_debug("Detected system needing EC poll on resume.\n");
1466 EC_FLAGS_CLEAR_ON_RESUME
= 1;
1467 ec_event_clearing
= ACPI_EC_EVT_TIMING_STATUS
;
1471 static struct dmi_system_id ec_dmi_table
[] __initdata
= {
1473 ec_skip_dsdt_scan
, "Compal JFL92", {
1474 DMI_MATCH(DMI_BIOS_VENDOR
, "COMPAL"),
1475 DMI_MATCH(DMI_BOARD_NAME
, "JFL92") }, NULL
},
1477 ec_validate_ecdt
, "MSI MS-171F", {
1478 DMI_MATCH(DMI_SYS_VENDOR
, "Micro-Star"),
1479 DMI_MATCH(DMI_PRODUCT_NAME
, "MS-171F"),}, NULL
},
1481 ec_validate_ecdt
, "ASUS hardware", {
1482 DMI_MATCH(DMI_BIOS_VENDOR
, "ASUS") }, NULL
},
1484 ec_validate_ecdt
, "ASUS hardware", {
1485 DMI_MATCH(DMI_BOARD_VENDOR
, "ASUSTeK Computer Inc.") }, NULL
},
1487 ec_skip_dsdt_scan
, "HP Folio 13", {
1488 DMI_MATCH(DMI_SYS_VENDOR
, "Hewlett-Packard"),
1489 DMI_MATCH(DMI_PRODUCT_NAME
, "HP Folio 13"),}, NULL
},
1491 ec_validate_ecdt
, "ASUS hardware", {
1492 DMI_MATCH(DMI_SYS_VENDOR
, "ASUSTek Computer Inc."),
1493 DMI_MATCH(DMI_PRODUCT_NAME
, "L4R"),}, NULL
},
1495 ec_clear_on_resume
, "Samsung hardware", {
1496 DMI_MATCH(DMI_SYS_VENDOR
, "SAMSUNG ELECTRONICS CO., LTD.")}, NULL
},
1500 int __init
acpi_ec_ecdt_probe(void)
1503 struct acpi_ec
*saved_ec
= NULL
;
1504 struct acpi_table_ecdt
*ecdt_ptr
;
1506 boot_ec
= make_acpi_ec();
1510 * Generate a boot ec context
1512 dmi_check_system(ec_dmi_table
);
1513 status
= acpi_get_table(ACPI_SIG_ECDT
, 1,
1514 (struct acpi_table_header
**)&ecdt_ptr
);
1515 if (ACPI_SUCCESS(status
)) {
1516 pr_info("EC description table is found, configuring boot EC\n");
1517 boot_ec
->command_addr
= ecdt_ptr
->control
.address
;
1518 boot_ec
->data_addr
= ecdt_ptr
->data
.address
;
1519 boot_ec
->gpe
= ecdt_ptr
->gpe
;
1520 boot_ec
->handle
= ACPI_ROOT_OBJECT
;
1521 acpi_get_handle(ACPI_ROOT_OBJECT
, ecdt_ptr
->id
,
1523 /* Don't trust ECDT, which comes from ASUSTek */
1524 if (!EC_FLAGS_VALIDATE_ECDT
)
1526 saved_ec
= kmemdup(boot_ec
, sizeof(struct acpi_ec
), GFP_KERNEL
);
1532 if (EC_FLAGS_SKIP_DSDT_SCAN
) {
1537 /* This workaround is needed only on some broken machines,
1538 * which require early EC, but fail to provide ECDT */
1539 pr_debug("Look up EC in DSDT\n");
1540 status
= acpi_get_devices(ec_device_ids
[0].id
, ec_parse_device
,
1542 /* Check that acpi_get_devices actually find something */
1543 if (ACPI_FAILURE(status
) || !boot_ec
->handle
)
1546 /* try to find good ECDT from ASUSTek */
1547 if (saved_ec
->command_addr
!= boot_ec
->command_addr
||
1548 saved_ec
->data_addr
!= boot_ec
->data_addr
||
1549 saved_ec
->gpe
!= boot_ec
->gpe
||
1550 saved_ec
->handle
!= boot_ec
->handle
)
1551 pr_info("ASUSTek keeps feeding us with broken "
1552 "ECDT tables, which are very hard to workaround. "
1553 "Trying to use DSDT EC info instead. Please send "
1554 "output of acpidump to linux-acpi@vger.kernel.org\n");
1558 /* We really need to limit this workaround, the only ASUS,
1559 * which needs it, has fake EC._INI method, so use it as flag.
1560 * Keep boot_ec struct as it will be needed soon.
1562 if (!dmi_name_in_vendors("ASUS") ||
1563 !acpi_has_method(boot_ec
->handle
, "_INI"))
1567 if (!ec_install_handlers(boot_ec
)) {
1578 static int param_set_event_clearing(const char *val
, struct kernel_param
*kp
)
1582 if (!strncmp(val
, "status", sizeof("status") - 1)) {
1583 ec_event_clearing
= ACPI_EC_EVT_TIMING_STATUS
;
1584 pr_info("Assuming SCI_EVT clearing on EC_SC accesses\n");
1585 } else if (!strncmp(val
, "query", sizeof("query") - 1)) {
1586 ec_event_clearing
= ACPI_EC_EVT_TIMING_QUERY
;
1587 pr_info("Assuming SCI_EVT clearing on QR_EC writes\n");
1588 } else if (!strncmp(val
, "event", sizeof("event") - 1)) {
1589 ec_event_clearing
= ACPI_EC_EVT_TIMING_EVENT
;
1590 pr_info("Assuming SCI_EVT clearing on event reads\n");
1596 static int param_get_event_clearing(char *buffer
, struct kernel_param
*kp
)
1598 switch (ec_event_clearing
) {
1599 case ACPI_EC_EVT_TIMING_STATUS
:
1600 return sprintf(buffer
, "status");
1601 case ACPI_EC_EVT_TIMING_QUERY
:
1602 return sprintf(buffer
, "query");
1603 case ACPI_EC_EVT_TIMING_EVENT
:
1604 return sprintf(buffer
, "event");
1606 return sprintf(buffer
, "invalid");
1611 module_param_call(ec_event_clearing
, param_set_event_clearing
, param_get_event_clearing
,
1613 MODULE_PARM_DESC(ec_event_clearing
, "Assumed SCI_EVT clearing timing");
1615 static struct acpi_driver acpi_ec_driver
= {
1617 .class = ACPI_EC_CLASS
,
1618 .ids
= ec_device_ids
,
1621 .remove
= acpi_ec_remove
,
1625 int __init
acpi_ec_init(void)
1629 /* Now register the driver for the EC */
1630 result
= acpi_bus_register_driver(&acpi_ec_driver
);
1637 /* EC driver currently not unloadable */
1639 static void __exit
acpi_ec_exit(void)
1642 acpi_bus_unregister_driver(&acpi_ec_driver
);