drivers/acpi/sleep.c

   1 /*
   2  * sleep.c - ACPI sleep support.
   3  *
   4  * Copyright (c) 2005 Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
   5  * Copyright (c) 2004 David Shaohua Li <shaohua.li@intel.com>
   6  * Copyright (c) 2000-2003 Patrick Mochel
   7  * Copyright (c) 2003 Open Source Development Lab
   8  *
   9  * This file is released under the GPLv2.
  10  *
  11  */
  12
  13 #include <linux/delay.h>
  14 #include <linux/irq.h>
  15 #include <linux/dmi.h>
  16 #include <linux/device.h>
  17 #include <linux/suspend.h>
  18 #include <linux/reboot.h>
  19 #include <linux/acpi.h>
  20 #include <linux/module.h>
  21
  22 #include <asm/io.h>
  23
  24 #include <acpi/acpi_bus.h>
  25 #include <acpi/acpi_drivers.h>
  26
  27 #include "internal.h"
  28 #include "sleep.h"
  29
  30 static u8 sleep_states[ACPI_S_STATE_COUNT];
  31
  32 static void acpi_sleep_tts_switch(u32 acpi_state)
  33 {
  34         union acpi_object in_arg = { ACPI_TYPE_INTEGER };
  35         struct acpi_object_list arg_list = { 1, &in_arg };
  36         acpi_status status = AE_OK;
  37
  38         in_arg.integer.value = acpi_state;
  39         status = acpi_evaluate_object(NULL, "\\_TTS", &arg_list, NULL);
  40         if (ACPI_FAILURE(status) && status != AE_NOT_FOUND) {
  41                 /*
  42                  * OS can't evaluate the _TTS object correctly. Some warning
  43                  * message will be printed. But it won't break anything.
  44                  */
  45                 printk(KERN_NOTICE "Failure in evaluating _TTS object\n");
  46         }
  47 }
  48
  49 static int tts_notify_reboot(struct notifier_block *this,
  50                         unsigned long code, void *x)
  51 {
  52         acpi_sleep_tts_switch(ACPI_STATE_S5);
  53         return NOTIFY_DONE;
  54 }
  55
  56 static struct notifier_block tts_notifier = {
  57         .notifier_call  = tts_notify_reboot,
  58         .next           = NULL,
  59         .priority       = 0,
  60 };
  61
  62 static int acpi_sleep_prepare(u32 acpi_state)
  63 {
  64 #ifdef CONFIG_ACPI_SLEEP
  65         /* do we have a wakeup address for S2 and S3? */
  66         if (acpi_state == ACPI_STATE_S3) {
  67                 if (!acpi_wakeup_address)
  68                         return -EFAULT;
  69                 acpi_set_firmware_waking_vector(acpi_wakeup_address);
  70
  71         }
  72         ACPI_FLUSH_CPU_CACHE();
  73 #endif
  74         printk(KERN_INFO PREFIX "Preparing to enter system sleep state S%d\n",
  75                 acpi_state);
  76         acpi_enable_wakeup_devices(acpi_state);
  77         acpi_enter_sleep_state_prep(acpi_state);
  78         return 0;
  79 }
  80
  81 #ifdef CONFIG_ACPI_SLEEP
  82 static u32 acpi_target_sleep_state = ACPI_STATE_S0;
  83
  84 u32 acpi_target_system_state(void)
  85 {
  86         return acpi_target_sleep_state;
  87 }
  88
  89 static bool pwr_btn_event_pending;
  90
  91 /*
  92  * The ACPI specification wants us to save NVS memory regions during hibernation
  93  * and to restore them during the subsequent resume.  Windows does that also for
  94  * suspend to RAM.  However, it is known that this mechanism does not work on
  95  * all machines, so we allow the user to disable it with the help of the
  96  * 'acpi_sleep=nonvs' kernel command line option.
  97  */
  98 static bool nvs_nosave;
  99
 100 void __init acpi_nvs_nosave(void)
 101 {
 102         nvs_nosave = true;
 103 }
 104
 105 /*
 106  * The ACPI specification wants us to save NVS memory regions during hibernation
 107  * but says nothing about saving NVS during S3.  Not all versions of Windows
 108  * save NVS on S3 suspend either, and it is clear that not all systems need
 109  * NVS to be saved at S3 time.  To improve suspend/resume time, allow the
 110  * user to disable saving NVS on S3 if their system does not require it, but
 111  * continue to save/restore NVS for S4 as specified.
 112  */
 113 static bool nvs_nosave_s3;
 114
 115 void __init acpi_nvs_nosave_s3(void)
 116 {
 117         nvs_nosave_s3 = true;
 118 }
 119
 120 /*
 121  * ACPI 1.0 wants us to execute _PTS before suspending devices, so we allow the
 122  * user to request that behavior by using the 'acpi_old_suspend_ordering'
 123  * kernel command line option that causes the following variable to be set.
 124  */
 125 static bool old_suspend_ordering;
 126
 127 void __init acpi_old_suspend_ordering(void)
 128 {
 129         old_suspend_ordering = true;
 130 }
 131
 132 static int __init init_old_suspend_ordering(const struct dmi_system_id *d)
 133 {
 134         acpi_old_suspend_ordering();
 135         return 0;
 136 }
 137
 138 static int __init init_nvs_nosave(const struct dmi_system_id *d)
 139 {
 140         acpi_nvs_nosave();
 141         return 0;
 142 }
 143
 144 static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 145         {
 146         .callback = init_old_suspend_ordering,
 147         .ident = "Abit KN9 (nForce4 variant)",
 148         .matches = {
 149                 DMI_MATCH(DMI_BOARD_VENDOR, "http://www.abit.com.tw/"),
 150                 DMI_MATCH(DMI_BOARD_NAME, "KN9 Series(NF-CK804)"),
 151                 },
 152         },
 153         {
 154         .callback = init_old_suspend_ordering,
 155         .ident = "HP xw4600 Workstation",
 156         .matches = {
 157                 DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
 158                 DMI_MATCH(DMI_PRODUCT_NAME, "HP xw4600 Workstation"),
 159                 },
 160         },
 161         {
 162         .callback = init_old_suspend_ordering,
 163         .ident = "Asus Pundit P1-AH2 (M2N8L motherboard)",
 164         .matches = {
 165                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTek Computer INC."),
 166                 DMI_MATCH(DMI_BOARD_NAME, "M2N8L"),
 167                 },
 168         },
 169         {
 170         .callback = init_old_suspend_ordering,
 171         .ident = "Panasonic CF51-2L",
 172         .matches = {
 173                 DMI_MATCH(DMI_BOARD_VENDOR,
 174                                 "Matsushita Electric Industrial Co.,Ltd."),
 175                 DMI_MATCH(DMI_BOARD_NAME, "CF51-2L"),
 176                 },
 177         },
 178         {
 179         .callback = init_nvs_nosave,
 180         .ident = "Sony Vaio VGN-FW21E",
 181         .matches = {
 182                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 183                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW21E"),
 184                 },
 185         },
 186         {
 187         .callback = init_nvs_nosave,
 188         .ident = "Sony Vaio VPCEB17FX",
 189         .matches = {
 190                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 191                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB17FX"),
 192                 },
 193         },
 194         {
 195         .callback = init_nvs_nosave,
 196         .ident = "Sony Vaio VGN-SR11M",
 197         .matches = {
 198                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 199                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR11M"),
 200                 },
 201         },
 202         {
 203         .callback = init_nvs_nosave,
 204         .ident = "Everex StepNote Series",
 205         .matches = {
 206                 DMI_MATCH(DMI_SYS_VENDOR, "Everex Systems, Inc."),
 207                 DMI_MATCH(DMI_PRODUCT_NAME, "Everex StepNote Series"),
 208                 },
 209         },
 210         {
 211         .callback = init_nvs_nosave,
 212         .ident = "Sony Vaio VPCEB1Z1E",
 213         .matches = {
 214                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 215                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1Z1E"),
 216                 },
 217         },
 218         {
 219         .callback = init_nvs_nosave,
 220         .ident = "Sony Vaio VGN-NW130D",
 221         .matches = {
 222                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 223                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-NW130D"),
 224                 },
 225         },
 226         {
 227         .callback = init_nvs_nosave,
 228         .ident = "Sony Vaio VPCCW29FX",
 229         .matches = {
 230                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 231                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCCW29FX"),
 232                 },
 233         },
 234         {
 235         .callback = init_nvs_nosave,
 236         .ident = "Averatec AV1020-ED2",
 237         .matches = {
 238                 DMI_MATCH(DMI_SYS_VENDOR, "AVERATEC"),
 239                 DMI_MATCH(DMI_PRODUCT_NAME, "1000 Series"),
 240                 },
 241         },
 242         {
 243         .callback = init_old_suspend_ordering,
 244         .ident = "Asus A8N-SLI DELUXE",
 245         .matches = {
 246                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 247                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI DELUXE"),
 248                 },
 249         },
 250         {
 251         .callback = init_old_suspend_ordering,
 252         .ident = "Asus A8N-SLI Premium",
 253         .matches = {
 254                 DMI_MATCH(DMI_BOARD_VENDOR, "ASUSTeK Computer INC."),
 255                 DMI_MATCH(DMI_BOARD_NAME, "A8N-SLI Premium"),
 256                 },
 257         },
 258         {
 259         .callback = init_nvs_nosave,
 260         .ident = "Sony Vaio VGN-SR26GN_P",
 261         .matches = {
 262                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 263                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-SR26GN_P"),
 264                 },
 265         },
 266         {
 267         .callback = init_nvs_nosave,
 268         .ident = "Sony Vaio VPCEB1S1E",
 269         .matches = {
 270                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 271                 DMI_MATCH(DMI_PRODUCT_NAME, "VPCEB1S1E"),
 272                 },
 273         },
 274         {
 275         .callback = init_nvs_nosave,
 276         .ident = "Sony Vaio VGN-FW520F",
 277         .matches = {
 278                 DMI_MATCH(DMI_SYS_VENDOR, "Sony Corporation"),
 279                 DMI_MATCH(DMI_PRODUCT_NAME, "VGN-FW520F"),
 280                 },
 281         },
 282         {
 283         .callback = init_nvs_nosave,
 284         .ident = "Asus K54C",
 285         .matches = {
 286                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 287                 DMI_MATCH(DMI_PRODUCT_NAME, "K54C"),
 288                 },
 289         },
 290         {
 291         .callback = init_nvs_nosave,
 292         .ident = "Asus K54HR",
 293         .matches = {
 294                 DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK Computer Inc."),
 295                 DMI_MATCH(DMI_PRODUCT_NAME, "K54HR"),
 296                 },
 297         },
 298         {},
 299 };
 300
 301 static void acpi_sleep_dmi_check(void)
 302 {
 303         dmi_check_system(acpisleep_dmi_table);
 304 }
 305
 306 /**
 307  * acpi_pm_freeze - Disable the GPEs and suspend EC transactions.
 308  */
 309 static int acpi_pm_freeze(void)
 310 {
 311         acpi_disable_all_gpes();
 312         acpi_os_wait_events_complete();
 313         acpi_ec_block_transactions();
 314         return 0;
 315 }
 316
 317 /**
 318  * acpi_pre_suspend - Enable wakeup devices, "freeze" EC and save NVS.
 319  */
 320 static int acpi_pm_pre_suspend(void)
 321 {
 322         acpi_pm_freeze();
 323         return suspend_nvs_save();
 324 }
 325
 326 /**
 327  *      __acpi_pm_prepare - Prepare the platform to enter the target state.
 328  *
 329  *      If necessary, set the firmware waking vector and do arch-specific
 330  *      nastiness to get the wakeup code to the waking vector.
 331  */
 332 static int __acpi_pm_prepare(void)
 333 {
 334         int error = acpi_sleep_prepare(acpi_target_sleep_state);
 335         if (error)
 336                 acpi_target_sleep_state = ACPI_STATE_S0;
 337
 338         return error;
 339 }
 340
 341 /**
 342  *      acpi_pm_prepare - Prepare the platform to enter the target sleep
 343  *              state and disable the GPEs.
 344  */
 345 static int acpi_pm_prepare(void)
 346 {
 347         int error = __acpi_pm_prepare();
 348         if (!error)
 349                 error = acpi_pm_pre_suspend();
 350
 351         return error;
 352 }
 353
 354 static int find_powerf_dev(struct device *dev, void *data)
 355 {
 356         struct acpi_device *device = to_acpi_device(dev);
 357         const char *hid = acpi_device_hid(device);
 358
 359         return !strcmp(hid, ACPI_BUTTON_HID_POWERF);
 360 }
 361
 362 /**
 363  *      acpi_pm_finish - Instruct the platform to leave a sleep state.
 364  *
 365  *      This is called after we wake back up (or if entering the sleep state
 366  *      failed).
 367  */
 368 static void acpi_pm_finish(void)
 369 {
 370         struct device *pwr_btn_dev;
 371         u32 acpi_state = acpi_target_sleep_state;
 372
 373         acpi_ec_unblock_transactions();
 374         suspend_nvs_free();
 375
 376         if (acpi_state == ACPI_STATE_S0)
 377                 return;
 378
 379         printk(KERN_INFO PREFIX "Waking up from system sleep state S%d\n",
 380                 acpi_state);
 381         acpi_disable_wakeup_devices(acpi_state);
 382         acpi_leave_sleep_state(acpi_state);
 383
 384         /* reset firmware waking vector */
 385         acpi_set_firmware_waking_vector((acpi_physical_address) 0);
 386
 387         acpi_target_sleep_state = ACPI_STATE_S0;
 388
 389         /* If we were woken with the fixed power button, provide a small
 390          * hint to userspace in the form of a wakeup event on the fixed power
 391          * button device (if it can be found).
 392          *
 393          * We delay the event generation til now, as the PM layer requires
 394          * timekeeping to be running before we generate events. */
 395         if (!pwr_btn_event_pending)
 396                 return;
 397
 398         pwr_btn_event_pending = false;
 399         pwr_btn_dev = bus_find_device(&acpi_bus_type, NULL, NULL,
 400                                       find_powerf_dev);
 401         if (pwr_btn_dev) {
 402                 pm_wakeup_event(pwr_btn_dev, 0);
 403                 put_device(pwr_btn_dev);
 404         }
 405 }
 406
 407 /**
 408  *      acpi_pm_end - Finish up suspend sequence.
 409  */
 410 static void acpi_pm_end(void)
 411 {
 412         /*
 413          * This is necessary in case acpi_pm_finish() is not called during a
 414          * failing transition to a sleep state.
 415          */
 416         acpi_target_sleep_state = ACPI_STATE_S0;
 417         acpi_sleep_tts_switch(acpi_target_sleep_state);
 418 }
 419 #else /* !CONFIG_ACPI_SLEEP */
 420 #define acpi_target_sleep_state ACPI_STATE_S0
 421 static inline void acpi_sleep_dmi_check(void) {}
 422 #endif /* CONFIG_ACPI_SLEEP */
 423
 424 #ifdef CONFIG_SUSPEND
 425 static u32 acpi_suspend_states[] = {
 426         [PM_SUSPEND_ON] = ACPI_STATE_S0,
 427         [PM_SUSPEND_STANDBY] = ACPI_STATE_S1,
 428         [PM_SUSPEND_MEM] = ACPI_STATE_S3,
 429         [PM_SUSPEND_MAX] = ACPI_STATE_S5
 430 };
 431
 432 /**
 433  *      acpi_suspend_begin - Set the target system sleep state to the state
 434  *              associated with given @pm_state, if supported.
 435  */
 436 static int acpi_suspend_begin(suspend_state_t pm_state)
 437 {
 438         u32 acpi_state = acpi_suspend_states[pm_state];
 439         int error = 0;
 440
 441         error = (nvs_nosave || nvs_nosave_s3) ? 0 : suspend_nvs_alloc();
 442         if (error)
 443                 return error;
 444
 445         if (sleep_states[acpi_state]) {
 446                 acpi_target_sleep_state = acpi_state;
 447                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 448         } else {
 449                 printk(KERN_ERR "ACPI does not support this state: %d\n",
 450                         pm_state);
 451                 error = -ENOSYS;
 452         }
 453         return error;
 454 }
 455
 456 /**
 457  *      acpi_suspend_enter - Actually enter a sleep state.
 458  *      @pm_state: ignored
 459  *
 460  *      Flush caches and go to sleep. For STR we have to call arch-specific
 461  *      assembly, which in turn call acpi_enter_sleep_state().
 462  *      It's unfortunate, but it works. Please fix if you're feeling frisky.
 463  */
 464 static int acpi_suspend_enter(suspend_state_t pm_state)
 465 {
 466         acpi_status status = AE_OK;
 467         u32 acpi_state = acpi_target_sleep_state;
 468         int error;
 469
 470         ACPI_FLUSH_CPU_CACHE();
 471
 472         switch (acpi_state) {
 473         case ACPI_STATE_S1:
 474                 barrier();
 475                 status = acpi_enter_sleep_state(acpi_state);
 476                 break;
 477
 478         case ACPI_STATE_S3:
 479                 error = acpi_suspend_lowlevel();
 480                 if (error)
 481                         return error;
 482                 pr_info(PREFIX "Low-level resume complete\n");
 483                 break;
 484         }
 485
 486         /* This violates the spec but is required for bug compatibility. */
 487         acpi_write_bit_register(ACPI_BITREG_SCI_ENABLE, 1);
 488
 489         /* Reprogram control registers */
 490         acpi_leave_sleep_state_prep(acpi_state);
 491
 492         /* ACPI 3.0 specs (P62) says that it's the responsibility
 493          * of the OSPM to clear the status bit [ implying that the
 494          * POWER_BUTTON event should not reach userspace ]
 495          *
 496          * However, we do generate a small hint for userspace in the form of
 497          * a wakeup event. We flag this condition for now and generate the
 498          * event later, as we're currently too early in resume to be able to
 499          * generate wakeup events.
 500          */
 501         if (ACPI_SUCCESS(status) && (acpi_state == ACPI_STATE_S3)) {
 502                 acpi_event_status pwr_btn_status;
 503
 504                 acpi_get_event_status(ACPI_EVENT_POWER_BUTTON, &pwr_btn_status);
 505
 506                 if (pwr_btn_status & ACPI_EVENT_FLAG_SET) {
 507                         acpi_clear_event(ACPI_EVENT_POWER_BUTTON);
 508                         /* Flag for later */
 509                         pwr_btn_event_pending = true;
 510                 }
 511         }
 512
 513         /*
 514          * Disable and clear GPE status before interrupt is enabled. Some GPEs
 515          * (like wakeup GPE) haven't handler, this can avoid such GPE misfire.
 516          * acpi_leave_sleep_state will reenable specific GPEs later
 517          */
 518         acpi_disable_all_gpes();
 519         /* Allow EC transactions to happen. */
 520         acpi_ec_unblock_transactions_early();
 521
 522         suspend_nvs_restore();
 523
 524         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 525 }
 526
 527 static int acpi_suspend_state_valid(suspend_state_t pm_state)
 528 {
 529         u32 acpi_state;
 530
 531         switch (pm_state) {
 532         case PM_SUSPEND_ON:
 533         case PM_SUSPEND_STANDBY:
 534         case PM_SUSPEND_MEM:
 535                 acpi_state = acpi_suspend_states[pm_state];
 536
 537                 return sleep_states[acpi_state];
 538         default:
 539                 return 0;
 540         }
 541 }
 542
 543 static const struct platform_suspend_ops acpi_suspend_ops = {
 544         .valid = acpi_suspend_state_valid,
 545         .begin = acpi_suspend_begin,
 546         .prepare_late = acpi_pm_prepare,
 547         .enter = acpi_suspend_enter,
 548         .wake = acpi_pm_finish,
 549         .end = acpi_pm_end,
 550 };
 551
 552 /**
 553  *      acpi_suspend_begin_old - Set the target system sleep state to the
 554  *              state associated with given @pm_state, if supported, and
 555  *              execute the _PTS control method.  This function is used if the
 556  *              pre-ACPI 2.0 suspend ordering has been requested.
 557  */
 558 static int acpi_suspend_begin_old(suspend_state_t pm_state)
 559 {
 560         int error = acpi_suspend_begin(pm_state);
 561         if (!error)
 562                 error = __acpi_pm_prepare();
 563
 564         return error;
 565 }
 566
 567 /*
 568  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 569  * been requested.
 570  */
 571 static const struct platform_suspend_ops acpi_suspend_ops_old = {
 572         .valid = acpi_suspend_state_valid,
 573         .begin = acpi_suspend_begin_old,
 574         .prepare_late = acpi_pm_pre_suspend,
 575         .enter = acpi_suspend_enter,
 576         .wake = acpi_pm_finish,
 577         .end = acpi_pm_end,
 578         .recover = acpi_pm_finish,
 579 };
 580 #endif /* CONFIG_SUSPEND */
 581
 582 #ifdef CONFIG_HIBERNATION
 583 static unsigned long s4_hardware_signature;
 584 static struct acpi_table_facs *facs;
 585 static bool nosigcheck;
 586
 587 void __init acpi_no_s4_hw_signature(void)
 588 {
 589         nosigcheck = true;
 590 }
 591
 592 static int acpi_hibernation_begin(void)
 593 {
 594         int error;
 595
 596         error = nvs_nosave ? 0 : suspend_nvs_alloc();
 597         if (!error) {
 598                 acpi_target_sleep_state = ACPI_STATE_S4;
 599                 acpi_sleep_tts_switch(acpi_target_sleep_state);
 600         }
 601
 602         return error;
 603 }
 604
 605 static int acpi_hibernation_enter(void)
 606 {
 607         acpi_status status = AE_OK;
 608
 609         ACPI_FLUSH_CPU_CACHE();
 610
 611         /* This shouldn't return.  If it returns, we have a problem */
 612         status = acpi_enter_sleep_state(ACPI_STATE_S4);
 613         /* Reprogram control registers */
 614         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 615
 616         return ACPI_SUCCESS(status) ? 0 : -EFAULT;
 617 }
 618
 619 static void acpi_hibernation_leave(void)
 620 {
 621         /*
 622          * If ACPI is not enabled by the BIOS and the boot kernel, we need to
 623          * enable it here.
 624          */
 625         acpi_enable();
 626         /* Reprogram control registers */
 627         acpi_leave_sleep_state_prep(ACPI_STATE_S4);
 628         /* Check the hardware signature */
 629         if (facs && s4_hardware_signature != facs->hardware_signature) {
 630                 printk(KERN_EMERG "ACPI: Hardware changed while hibernated, "
 631                         "cannot resume!\n");
 632                 panic("ACPI S4 hardware signature mismatch");
 633         }
 634         /* Restore the NVS memory area */
 635         suspend_nvs_restore();
 636         /* Allow EC transactions to happen. */
 637         acpi_ec_unblock_transactions_early();
 638 }
 639
 640 static void acpi_pm_thaw(void)
 641 {
 642         acpi_ec_unblock_transactions();
 643         acpi_enable_all_runtime_gpes();
 644 }
 645
 646 static const struct platform_hibernation_ops acpi_hibernation_ops = {
 647         .begin = acpi_hibernation_begin,
 648         .end = acpi_pm_end,
 649         .pre_snapshot = acpi_pm_prepare,
 650         .finish = acpi_pm_finish,
 651         .prepare = acpi_pm_prepare,
 652         .enter = acpi_hibernation_enter,
 653         .leave = acpi_hibernation_leave,
 654         .pre_restore = acpi_pm_freeze,
 655         .restore_cleanup = acpi_pm_thaw,
 656 };
 657
 658 /**
 659  *      acpi_hibernation_begin_old - Set the target system sleep state to
 660  *              ACPI_STATE_S4 and execute the _PTS control method.  This
 661  *              function is used if the pre-ACPI 2.0 suspend ordering has been
 662  *              requested.
 663  */
 664 static int acpi_hibernation_begin_old(void)
 665 {
 666         int error;
 667         /*
 668          * The _TTS object should always be evaluated before the _PTS object.
 669          * When the old_suspended_ordering is true, the _PTS object is
 670          * evaluated in the acpi_sleep_prepare.
 671          */
 672         acpi_sleep_tts_switch(ACPI_STATE_S4);
 673
 674         error = acpi_sleep_prepare(ACPI_STATE_S4);
 675
 676         if (!error) {
 677                 if (!nvs_nosave)
 678                         error = suspend_nvs_alloc();
 679                 if (!error)
 680                         acpi_target_sleep_state = ACPI_STATE_S4;
 681         }
 682         return error;
 683 }
 684
 685 /*
 686  * The following callbacks are used if the pre-ACPI 2.0 suspend ordering has
 687  * been requested.
 688  */
 689 static const struct platform_hibernation_ops acpi_hibernation_ops_old = {
 690         .begin = acpi_hibernation_begin_old,
 691         .end = acpi_pm_end,
 692         .pre_snapshot = acpi_pm_pre_suspend,
 693         .prepare = acpi_pm_freeze,
 694         .finish = acpi_pm_finish,
 695         .enter = acpi_hibernation_enter,
 696         .leave = acpi_hibernation_leave,
 697         .pre_restore = acpi_pm_freeze,
 698         .restore_cleanup = acpi_pm_thaw,
 699         .recover = acpi_pm_finish,
 700 };
 701 #endif /* CONFIG_HIBERNATION */
 702
 703 int acpi_suspend(u32 acpi_state)
 704 {
 705         suspend_state_t states[] = {
 706                 [1] = PM_SUSPEND_STANDBY,
 707                 [3] = PM_SUSPEND_MEM,
 708                 [5] = PM_SUSPEND_MAX
 709         };
 710
 711         if (acpi_state < 6 && states[acpi_state])
 712                 return pm_suspend(states[acpi_state]);
 713         if (acpi_state == 4)
 714                 return hibernate();
 715         return -EINVAL;
 716 }
 717
 718 static void acpi_power_off_prepare(void)
 719 {
 720         /* Prepare to power off the system */
 721         acpi_sleep_prepare(ACPI_STATE_S5);
 722         acpi_disable_all_gpes();
 723 }
 724
 725 static void acpi_power_off(void)
 726 {
 727         /* acpi_sleep_prepare(ACPI_STATE_S5) should have already been called */
 728         printk(KERN_DEBUG "%s called\n", __func__);
 729         local_irq_disable();
 730         acpi_enter_sleep_state(ACPI_STATE_S5);
 731 }
 732
 733 int __init acpi_sleep_init(void)
 734 {
 735         acpi_status status;
 736         u8 type_a, type_b;
 737 #ifdef CONFIG_SUSPEND
 738         int i = 0;
 739 #endif
 740
 741         if (acpi_disabled)
 742                 return 0;
 743
 744         acpi_sleep_dmi_check();
 745
 746         sleep_states[ACPI_STATE_S0] = 1;
 747         printk(KERN_INFO PREFIX "(supports S0");
 748
 749 #ifdef CONFIG_SUSPEND
 750         for (i = ACPI_STATE_S1; i < ACPI_STATE_S4; i++) {
 751                 status = acpi_get_sleep_type_data(i, &type_a, &type_b);
 752                 if (ACPI_SUCCESS(status)) {
 753                         sleep_states[i] = 1;
 754                         printk(KERN_CONT " S%d", i);
 755                 }
 756         }
 757
 758         suspend_set_ops(old_suspend_ordering ?
 759                 &acpi_suspend_ops_old : &acpi_suspend_ops);
 760 #endif
 761
 762 #ifdef CONFIG_HIBERNATION
 763         status = acpi_get_sleep_type_data(ACPI_STATE_S4, &type_a, &type_b);
 764         if (ACPI_SUCCESS(status)) {
 765                 hibernation_set_ops(old_suspend_ordering ?
 766                         &acpi_hibernation_ops_old : &acpi_hibernation_ops);
 767                 sleep_states[ACPI_STATE_S4] = 1;
 768                 printk(KERN_CONT " S4");
 769                 if (!nosigcheck) {
 770                         acpi_get_table(ACPI_SIG_FACS, 1,
 771                                 (struct acpi_table_header **)&facs);
 772                         if (facs)
 773                                 s4_hardware_signature =
 774                                         facs->hardware_signature;
 775                 }
 776         }
 777 #endif
 778         status = acpi_get_sleep_type_data(ACPI_STATE_S5, &type_a, &type_b);
 779         if (ACPI_SUCCESS(status)) {
 780                 sleep_states[ACPI_STATE_S5] = 1;
 781                 printk(KERN_CONT " S5");
 782                 pm_power_off_prepare = acpi_power_off_prepare;
 783                 pm_power_off = acpi_power_off;
 784         }
 785         printk(KERN_CONT ")\n");
 786         /*
 787          * Register the tts_notifier to reboot notifier list so that the _TTS
 788          * object can also be evaluated when the system enters S5.
 789          */
 790         register_reboot_notifier(&tts_notifier);
 791         return 0;
 792 }