drivers/ata/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 #
   3 # SATA/PATA driver configuration
   4 #
   5
   6 config HAVE_PATA_PLATFORM
   7         bool
   8         help
   9           This is an internal configuration node for any machine that
  10           uses pata-platform driver to enable the relevant driver in the
  11           configuration structure without having to submit endless patches
  12           to update the PATA_PLATFORM entry.
  13
  14 menuconfig ATA
  15         tristate "Serial ATA and Parallel ATA drivers (libata)"
  16         depends on HAS_IOMEM
  17         depends on BLOCK
  18         select SCSI
  19         select GLOB
  20         help
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36
  37 config SATA_HOST
  38         bool
  39
  40 config PATA_TIMINGS
  41         bool
  42
  43 config ATA_VERBOSE_ERROR
  44         bool "Verbose ATA error reporting"
  45         default y
  46         help
  47           This option adds parsing of ATA command descriptions and error bits
  48           in libata kernel output, making it easier to interpret.
  49           This option will enlarge the kernel by approx. 6KB. Disable it only
  50           if kernel size is more important than ease of debugging.
  51
  52           If unsure, say Y.
  53
  54 config ATA_FORCE
  55         bool "\"libata.force=\" kernel parameter support" if EXPERT
  56         default y
  57         help
  58           This option adds support for "libata.force=" kernel parameter for
  59           forcing configuration settings.
  60
  61           For further information, please read
  62           <file:Documentation/admin-guide/kernel-parameters.txt>.
  63
  64           This option will enlarge the kernel by approx. 3KB. Disable it if
  65           kernel size is more important than ability to override the default
  66           configuration settings.
  67
  68           If unsure, say Y.
  69
  70 config ATA_ACPI
  71         bool "ATA ACPI Support"
  72         depends on ACPI
  73         select PATA_TIMINGS
  74         default y
  75         help
  76           This option adds support for ATA-related ACPI objects.
  77           These ACPI objects add the ability to retrieve taskfiles
  78           from the ACPI BIOS and write them to the disk controller.
  79           These objects may be related to performance, security,
  80           power management, or other areas.
  81           You can disable this at kernel boot time by using the
  82           option libata.noacpi=1
  83
  84 config SATA_ZPODD
  85         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  86         depends on ATA_ACPI && PM
  87         help
  88           This option adds support for SATA Zero Power Optical Disc
  89           Drive (ZPODD). It requires both the ODD and the platform
  90           support, and if enabled, will automatically power on/off the
  91           ODD when certain condition is satisfied. This does not impact
  92           end user's experience of the ODD, only power is saved when
  93           the ODD is not in use (i.e. no disc inside).
  94
  95           If unsure, say N.
  96
  97 config SATA_PMP
  98         bool "SATA Port Multiplier support"
  99         depends on SATA_HOST
 100         default y
 101         help
 102           This option adds support for SATA Port Multipliers
 103           (the SATA version of an ethernet hub, or SAS expander).
 104
 105 if HAS_DMA
 106
 107 comment "Controllers with non-SFF native interface"
 108
 109 config SATA_AHCI
 110         tristate "AHCI SATA support"
 111         depends on PCI
 112         select SATA_HOST
 113         help
 114           This option enables support for AHCI Serial ATA.
 115
 116           If unsure, say N.
 117
 118 config SATA_MOBILE_LPM_POLICY
 119         int "Default SATA Link Power Management policy for mobile chipsets"
 120         range 0 4
 121         default 0
 122         depends on SATA_AHCI
 123         help
 124           Select the Default SATA Link Power Management (LPM) policy to use
 125           for mobile / laptop variants of chipsets / "South Bridges".
 126
 127           The value set has the following meanings:
 128                 0 => Keep firmware settings
 129                 1 => Maximum performance
 130                 2 => Medium power
 131                 3 => Medium power with Device Initiated PM enabled
 132                 4 => Minimum power
 133
 134           Note "Minimum power" is known to cause issues, including disk
 135           corruption, with some disks and should not be used.
 136
 137 config SATA_AHCI_PLATFORM
 138         tristate "Platform AHCI SATA support"
 139         select SATA_HOST
 140         help
 141           This option enables support for Platform AHCI Serial ATA
 142           controllers.
 143
 144           If unsure, say N.
 145
 146 config AHCI_BRCM
 147         tristate "Broadcom AHCI SATA support"
 148         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP || \
 149                    ARCH_BCM_63XX
 150         select SATA_HOST
 151         help
 152           This option enables support for the AHCI SATA3 controller found on
 153           Broadcom SoC's.
 154
 155           If unsure, say N.
 156
 157 config AHCI_DA850
 158         tristate "DaVinci DA850 AHCI SATA support"
 159         depends on ARCH_DAVINCI_DA850
 160         select SATA_HOST
 161         help
 162           This option enables support for the DaVinci DA850 SoC's
 163           onboard AHCI SATA.
 164
 165           If unsure, say N.
 166
 167 config AHCI_DM816
 168         tristate "DaVinci DM816 AHCI SATA support"
 169         depends on ARCH_OMAP2PLUS
 170         select SATA_HOST
 171         help
 172           This option enables support for the DaVinci DM816 SoC's
 173           onboard AHCI SATA controller.
 174
 175           If unsure, say N.
 176
 177 config AHCI_ST
 178         tristate "ST AHCI SATA support"
 179         depends on ARCH_STI
 180         select SATA_HOST
 181         help
 182           This option enables support for ST AHCI SATA controller.
 183
 184           If unsure, say N.
 185
 186 config AHCI_IMX
 187         tristate "Freescale i.MX AHCI SATA support"
 188         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 189         depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 190         select SATA_HOST
 191         help
 192           This option enables support for the Freescale i.MX SoC's
 193           onboard AHCI SATA.
 194
 195           If unsure, say N.
 196
 197 config AHCI_CEVA
 198         tristate "CEVA AHCI SATA support"
 199         depends on OF
 200         select SATA_HOST
 201         help
 202           This option enables support for the CEVA AHCI SATA.
 203           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 204
 205           If unsure, say N.
 206
 207 config AHCI_MTK
 208         tristate "MediaTek AHCI SATA support"
 209         depends on ARCH_MEDIATEK
 210         select MFD_SYSCON
 211         select SATA_HOST
 212         help
 213           This option enables support for the MediaTek SoC's
 214           onboard AHCI SATA controller.
 215
 216           If unsure, say N.
 217
 218 config AHCI_MVEBU
 219         tristate "Marvell EBU AHCI SATA support"
 220         depends on ARCH_MVEBU
 221         select SATA_HOST
 222         help
 223           This option enables support for the Marvebu EBU SoC's
 224           onboard AHCI SATA.
 225
 226           If unsure, say N.
 227
 228 config AHCI_OCTEON
 229         tristate "Cavium Octeon Soc Serial ATA"
 230         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 231         default y
 232         help
 233           This option enables support for Cavium Octeon SoC Serial ATA.
 234
 235           If unsure, say N.
 236
 237 config AHCI_SUNXI
 238         tristate "Allwinner sunxi AHCI SATA support"
 239         depends on ARCH_SUNXI
 240         select SATA_HOST
 241         help
 242           This option enables support for the Allwinner sunxi SoC's
 243           onboard AHCI SATA.
 244
 245           If unsure, say N.
 246
 247 config AHCI_TEGRA
 248         tristate "NVIDIA Tegra AHCI SATA support"
 249         depends on ARCH_TEGRA
 250         select SATA_HOST
 251         help
 252           This option enables support for the NVIDIA Tegra SoC's
 253           onboard AHCI SATA.
 254
 255           If unsure, say N.
 256
 257 config AHCI_XGENE
 258         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 259         depends on PHY_XGENE
 260         select SATA_HOST
 261         help
 262          This option enables support for APM X-Gene SoC SATA host controller.
 263
 264 config AHCI_QORIQ
 265         tristate "Freescale QorIQ AHCI SATA support"
 266         depends on OF
 267         select SATA_HOST
 268         help
 269           This option enables support for the Freescale QorIQ AHCI SoC's
 270           onboard AHCI SATA.
 271
 272           If unsure, say N.
 273
 274 config SATA_FSL
 275         tristate "Freescale 3.0Gbps SATA support"
 276         depends on FSL_SOC
 277         select SATA_HOST
 278         help
 279           This option enables support for Freescale 3.0Gbps SATA controller.
 280           It can be found on MPC837x and MPC8315.
 281
 282           If unsure, say N.
 283
 284 config SATA_GEMINI
 285         tristate "Gemini SATA bridge support"
 286         depends on ARCH_GEMINI || COMPILE_TEST
 287         select SATA_HOST
 288         default ARCH_GEMINI
 289         help
 290           This enabled support for the FTIDE010 to SATA bridge
 291           found in Cortina Systems Gemini platform.
 292
 293           If unsure, say N.
 294
 295 config SATA_AHCI_SEATTLE
 296         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 297         depends on ARCH_SEATTLE
 298         select SATA_HOST
 299         help
 300          This option enables support for AMD Seattle SATA host controller.
 301
 302          If unsure, say N
 303
 304 config SATA_INIC162X
 305         tristate "Initio 162x SATA support (Very Experimental)"
 306         depends on PCI
 307         select SATA_HOST
 308         help
 309           This option enables support for Initio 162x Serial ATA.
 310
 311 config SATA_ACARD_AHCI
 312         tristate "ACard AHCI variant (ATP 8620)"
 313         depends on PCI
 314         select SATA_HOST
 315         help
 316           This option enables support for Acard.
 317
 318           If unsure, say N.
 319
 320 config SATA_SIL24
 321         tristate "Silicon Image 3124/3132 SATA support"
 322         depends on PCI
 323         select SATA_HOST
 324         help
 325           This option enables support for Silicon Image 3124/3132 Serial ATA.
 326
 327           If unsure, say N.
 328
 329 endif # HAS_DMA
 330
 331 config ATA_SFF
 332         bool "ATA SFF support (for legacy IDE and PATA)"
 333         default y
 334         help
 335           This option adds support for ATA controllers with SFF
 336           compliant or similar programming interface.
 337
 338           SFF is the legacy IDE interface that has been around since
 339           the dawn of time.  Almost all PATA controllers have an
 340           SFF interface.  Many SATA controllers have an SFF interface
 341           when configured into a legacy compatibility mode.
 342
 343           For users with exclusively modern controllers like AHCI,
 344           Silicon Image 3124, or Marvell 6440, you may choose to
 345           disable this unneeded SFF support.
 346
 347           If unsure, say Y.
 348
 349 if ATA_SFF
 350
 351 comment "SFF controllers with custom DMA interface"
 352
 353 config PDC_ADMA
 354         tristate "Pacific Digital ADMA support"
 355         depends on PCI
 356         help
 357           This option enables support for Pacific Digital ADMA controllers
 358
 359           If unsure, say N.
 360
 361 config PATA_OCTEON_CF
 362         tristate "OCTEON Boot Bus Compact Flash support"
 363         depends on CAVIUM_OCTEON_SOC
 364         select PATA_TIMINGS
 365         help
 366           This option enables a polled compact flash driver for use with
 367           compact flash cards attached to the OCTEON boot bus.
 368
 369           If unsure, say N.
 370
 371 config SATA_QSTOR
 372         tristate "Pacific Digital SATA QStor support"
 373         depends on PCI
 374         select SATA_HOST
 375         help
 376           This option enables support for Pacific Digital Serial ATA QStor.
 377
 378           If unsure, say N.
 379
 380 config SATA_SX4
 381         tristate "Promise SATA SX4 support (Experimental)"
 382         depends on PCI
 383         select SATA_HOST
 384         help
 385           This option enables support for Promise Serial ATA SX4.
 386
 387           If unsure, say N.
 388
 389 config ATA_BMDMA
 390         bool "ATA BMDMA support"
 391         depends on HAS_DMA
 392         default y
 393         help
 394           This option adds support for SFF ATA controllers with BMDMA
 395           capability.  BMDMA stands for bus-master DMA and is the
 396           de facto DMA interface for SFF controllers.
 397
 398           If unsure, say Y.
 399
 400 if ATA_BMDMA
 401
 402 comment "SATA SFF controllers with BMDMA"
 403
 404 config ATA_PIIX
 405         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 406         depends on PCI
 407         select SATA_HOST
 408         help
 409           This option enables support for ICH5/6/7/8 Serial ATA
 410           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 411           host controllers.
 412
 413           If unsure, say N.
 414
 415 config SATA_DWC
 416         tristate "DesignWare Cores SATA support"
 417         depends on DMADEVICES
 418         select GENERIC_PHY
 419         select SATA_HOST
 420         help
 421           This option enables support for the on-chip SATA controller of the
 422           AppliedMicro processor 460EX.
 423
 424           If unsure, say N.
 425
 426 config SATA_DWC_OLD_DMA
 427         bool "Support old device trees"
 428         depends on SATA_DWC
 429         select DW_DMAC_CORE
 430         default y if 460EX
 431         help
 432           This option enables support for old device trees without the
 433           "dmas" property.
 434
 435 config SATA_DWC_DEBUG
 436         bool "Debugging driver version"
 437         depends on SATA_DWC
 438         help
 439           This option enables debugging output in the driver.
 440
 441 config SATA_DWC_VDEBUG
 442         bool "Verbose debug output"
 443         depends on SATA_DWC_DEBUG
 444         help
 445           This option enables the taskfile dumping and NCQ debugging.
 446
 447 config SATA_HIGHBANK
 448         tristate "Calxeda Highbank SATA support"
 449         depends on ARCH_HIGHBANK || COMPILE_TEST
 450         select SATA_HOST
 451         help
 452           This option enables support for the Calxeda Highbank SoC's
 453           onboard SATA.
 454
 455           If unsure, say N.
 456
 457 config SATA_MV
 458         tristate "Marvell SATA support"
 459         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 460                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 461         select GENERIC_PHY
 462         select SATA_HOST
 463         help
 464           This option enables support for the Marvell Serial ATA family.
 465           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 466           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 467
 468           If unsure, say N.
 469
 470 config SATA_NV
 471         tristate "NVIDIA SATA support"
 472         depends on PCI
 473         select SATA_HOST
 474         help
 475           This option enables support for NVIDIA Serial ATA.
 476
 477           If unsure, say N.
 478
 479 config SATA_PROMISE
 480         tristate "Promise SATA TX2/TX4 support"
 481         depends on PCI
 482         select SATA_HOST
 483         help
 484           This option enables support for Promise Serial ATA TX2/TX4.
 485
 486           If unsure, say N.
 487
 488 config SATA_RCAR
 489         tristate "Renesas R-Car SATA support"
 490         depends on ARCH_RENESAS || COMPILE_TEST
 491         select SATA_HOST
 492         help
 493           This option enables support for Renesas R-Car Serial ATA.
 494
 495           If unsure, say N.
 496
 497 config SATA_SIL
 498         tristate "Silicon Image SATA support"
 499         depends on PCI
 500         select SATA_HOST
 501         help
 502           This option enables support for Silicon Image Serial ATA.
 503
 504           If unsure, say N.
 505
 506 config SATA_SIS
 507         tristate "SiS 964/965/966/180 SATA support"
 508         depends on PCI
 509         select PATA_SIS
 510         select SATA_HOST
 511         help
 512           This option enables support for SiS Serial ATA on
 513           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 514           The PATA support for SiS 180 requires additionally to
 515           enable the PATA_SIS driver in the config.
 516           If unsure, say N.
 517
 518 config SATA_SVW
 519         tristate "ServerWorks Frodo / Apple K2 SATA support"
 520         depends on PCI
 521         select SATA_HOST
 522         help
 523           This option enables support for Broadcom/Serverworks/Apple K2
 524           SATA support.
 525
 526           If unsure, say N.
 527
 528 config SATA_ULI
 529         tristate "ULi Electronics SATA support"
 530         depends on PCI
 531         select SATA_HOST
 532         help
 533           This option enables support for ULi Electronics SATA.
 534
 535           If unsure, say N.
 536
 537 config SATA_VIA
 538         tristate "VIA SATA support"
 539         depends on PCI
 540         select SATA_HOST
 541         help
 542           This option enables support for VIA Serial ATA.
 543
 544           If unsure, say N.
 545
 546 config SATA_VITESSE
 547         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 548         depends on PCI
 549         select SATA_HOST
 550         help
 551           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 552
 553           If unsure, say N.
 554
 555 comment "PATA SFF controllers with BMDMA"
 556
 557 config PATA_ALI
 558         tristate "ALi PATA support"
 559         depends on PCI
 560         select PATA_TIMINGS
 561         help
 562           This option enables support for the ALi ATA interfaces
 563           found on the many ALi chipsets.
 564
 565           If unsure, say N.
 566
 567 config PATA_AMD
 568         tristate "AMD/NVidia PATA support"
 569         depends on PCI
 570         select PATA_TIMINGS
 571         help
 572           This option enables support for the AMD and NVidia PATA
 573           interfaces found on the chipsets for Athlon/Athlon64.
 574
 575           If unsure, say N.
 576
 577 config PATA_ARASAN_CF
 578         tristate "ARASAN CompactFlash PATA Controller Support"
 579         depends on ARCH_SPEAR13XX || COMPILE_TEST
 580         depends on DMADEVICES
 581         select DMA_ENGINE
 582         help
 583           Say Y here to support the ARASAN CompactFlash PATA controller
 584
 585 config PATA_ARTOP
 586         tristate "ARTOP 6210/6260 PATA support"
 587         depends on PCI
 588         help
 589           This option enables support for ARTOP PATA controllers.
 590
 591           If unsure, say N.
 592
 593 config PATA_ATIIXP
 594         tristate "ATI PATA support"
 595         depends on PCI
 596         help
 597           This option enables support for the ATI ATA interfaces
 598           found on the many ATI chipsets.
 599
 600           If unsure, say N.
 601
 602 config PATA_ATP867X
 603         tristate "ARTOP/Acard ATP867X PATA support"
 604         depends on PCI
 605         select PATA_TIMINGS
 606         help
 607           This option enables support for ARTOP/Acard ATP867X PATA
 608           controllers.
 609
 610           If unsure, say N.
 611
 612 config PATA_BK3710
 613         tristate "Palmchip BK3710 PATA support"
 614         depends on ARCH_DAVINCI
 615         select PATA_TIMINGS
 616         help
 617           This option enables support for the integrated IDE controller on
 618           the TI DaVinci SoC.
 619
 620           If unsure, say N.
 621
 622 config PATA_CMD64X
 623         tristate "CMD64x PATA support"
 624         depends on PCI
 625         select PATA_TIMINGS
 626         help
 627           This option enables support for the CMD64x series chips
 628           except for the CMD640.
 629
 630           If unsure, say N.
 631
 632 config PATA_CS5520
 633         tristate "CS5510/5520 PATA support"
 634         depends on PCI && (X86_32 || COMPILE_TEST)
 635         help
 636           This option enables support for the Cyrix 5510/5520
 637           companion chip used with the MediaGX/Geode processor family.
 638
 639           If unsure, say N.
 640
 641 config PATA_CS5530
 642         tristate "CS5530 PATA support"
 643         depends on PCI && (X86_32 || COMPILE_TEST)
 644         help
 645           This option enables support for the Cyrix/NatSemi/AMD CS5530
 646           companion chip used with the MediaGX/Geode processor family.
 647
 648           If unsure, say N.
 649
 650 config PATA_CS5535
 651         tristate "CS5535 PATA support (Experimental)"
 652         depends on PCI && X86_32
 653         help
 654           This option enables support for the NatSemi/AMD CS5535
 655           companion chip used with the Geode processor family.
 656
 657           If unsure, say N.
 658
 659 config PATA_CS5536
 660         tristate "CS5536 PATA support"
 661         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 662         help
 663           This option enables support for the AMD CS5536
 664           companion chip used with the Geode LX processor family.
 665
 666           If unsure, say N.
 667
 668 config PATA_CYPRESS
 669         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 670         depends on PCI
 671         select PATA_TIMINGS
 672         help
 673           This option enables support for the Cypress/Contaq CY82C693
 674           chipset found in some Alpha systems
 675
 676           If unsure, say N.
 677
 678 config PATA_EFAR
 679         tristate "EFAR SLC90E66 support"
 680         depends on PCI
 681         help
 682           This option enables support for the EFAR SLC90E66
 683           IDE controller found on some older machines.
 684
 685           If unsure, say N.
 686
 687 config PATA_EP93XX
 688         tristate "Cirrus Logic EP93xx PATA support"
 689         depends on ARCH_EP93XX
 690         select PATA_TIMINGS
 691         help
 692           This option enables support for the PATA controller in
 693           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 694
 695           If unsure, say N.
 696
 697 config PATA_FTIDE010
 698         tristate "Faraday Technology FTIDE010 PATA support"
 699         depends on OF
 700         depends on ARM
 701         depends on SATA_GEMINI
 702         help
 703           This option enables support for the Faraday FTIDE010
 704           PATA controller found in the Cortina Gemini SoCs.
 705
 706           If unsure, say N.
 707
 708 config PATA_HPT366
 709         tristate "HPT 366/368 PATA support"
 710         depends on PCI
 711         help
 712           This option enables support for the HPT 366 and 368
 713           PATA controllers via the new ATA layer.
 714
 715           If unsure, say N.
 716
 717 config PATA_HPT37X
 718         tristate "HPT 370/370A/371/372/374/302 PATA support"
 719         depends on PCI
 720         help
 721           This option enables support for the majority of the later HPT
 722           PATA controllers via the new ATA layer.
 723
 724           If unsure, say N.
 725
 726 config PATA_HPT3X2N
 727         tristate "HPT 371N/372N/302N PATA support"
 728         depends on PCI
 729         help
 730           This option enables support for the N variant HPT PATA
 731           controllers via the new ATA layer.
 732
 733           If unsure, say N.
 734
 735 config PATA_HPT3X3
 736         tristate "HPT 343/363 PATA support"
 737         depends on PCI
 738         help
 739           This option enables support for the HPT 343/363
 740           PATA controllers via the new ATA layer
 741
 742           If unsure, say N.
 743
 744 config PATA_HPT3X3_DMA
 745         bool "HPT 343/363 DMA support"
 746         depends on PATA_HPT3X3
 747         help
 748           This option enables DMA support for the HPT343/363
 749           controllers. Enable with care as there are still some
 750           problems with DMA on this chipset.
 751
 752 config PATA_ICSIDE
 753         tristate "Acorn ICS PATA support"
 754         depends on ARM && ARCH_ACORN
 755         select PATA_TIMINGS
 756         help
 757           On Acorn systems, say Y here if you wish to use the ICS PATA
 758           interface card.  This is not required for ICS partition support.
 759           If you are unsure, say N to this.
 760
 761 config PATA_IMX
 762         tristate "PATA support for Freescale iMX"
 763         depends on ARCH_MXC
 764         select PATA_TIMINGS
 765         help
 766           This option enables support for the PATA host available on Freescale
 767           iMX SoCs.
 768
 769           If unsure, say N.
 770
 771 config PATA_IT8213
 772         tristate "IT8213 PATA support (Experimental)"
 773         depends on PCI
 774         help
 775           This option enables support for the ITE 821 PATA
 776           controllers via the new ATA layer.
 777
 778           If unsure, say N.
 779
 780 config PATA_IT821X
 781         tristate "IT8211/2 PATA support"
 782         depends on PCI
 783         help
 784           This option enables support for the ITE 8211 and 8212
 785           PATA controllers via the new ATA layer, including RAID
 786           mode.
 787
 788           If unsure, say N.
 789
 790 config PATA_JMICRON
 791         tristate "JMicron PATA support"
 792         depends on PCI
 793         help
 794           Enable support for the JMicron IDE controller, via the new
 795           ATA layer.
 796
 797           If unsure, say N.
 798
 799 config PATA_MACIO
 800         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 801         depends on PPC_PMAC
 802         help
 803           Most IDE capable PowerMacs have IDE busses driven by a variant
 804           of this controller which is part of the Apple chipset used on
 805           most PowerMac models. Some models have multiple busses using
 806           different chipsets, though generally, MacIO is one of them.
 807
 808 config PATA_MARVELL
 809         tristate "Marvell PATA support via legacy mode"
 810         depends on PCI
 811         help
 812           This option enables limited support for the Marvell 88SE61xx ATA
 813           controllers. If you wish to use only the SATA ports then select
 814           the AHCI driver alone. If you wish to the use the PATA port or
 815           both SATA and PATA include this driver.
 816
 817           If unsure, say N.
 818
 819 config PATA_MPC52xx
 820         tristate "Freescale MPC52xx SoC internal IDE"
 821         depends on PPC_MPC52xx && PPC_BESTCOMM
 822         select PPC_BESTCOMM_ATA
 823         help
 824           This option enables support for integrated IDE controller
 825           of the Freescale MPC52xx SoC.
 826
 827           If unsure, say N.
 828
 829 config PATA_NETCELL
 830         tristate "NETCELL Revolution RAID support"
 831         depends on PCI
 832         help
 833           This option enables support for the Netcell Revolution RAID
 834           PATA controller.
 835
 836           If unsure, say N.
 837
 838 config PATA_NINJA32
 839         tristate "Ninja32/Delkin Cardbus ATA support"
 840         depends on PCI
 841         help
 842           This option enables support for the Ninja32, Delkin and
 843           possibly other brands of Cardbus ATA adapter
 844
 845           If unsure, say N.
 846
 847 config PATA_NS87415
 848         tristate "Nat Semi NS87415 PATA support"
 849         depends on PCI
 850         select PATA_TIMINGS
 851         help
 852           This option enables support for the National Semiconductor
 853           NS87415 PCI-IDE controller.
 854
 855           If unsure, say N.
 856
 857 config PATA_OLDPIIX
 858         tristate "Intel PATA old PIIX support"
 859         depends on PCI
 860         help
 861           This option enables support for early PIIX PATA support.
 862
 863           If unsure, say N.
 864
 865 config PATA_OPTIDMA
 866         tristate "OPTI FireStar PATA support (Very Experimental)"
 867         depends on PCI
 868         help
 869           This option enables DMA/PIO support for the later OPTi
 870           controllers found on some old motherboards and in some
 871           laptops.
 872
 873           If unsure, say N.
 874
 875 config PATA_PDC2027X
 876         tristate "Promise PATA 2027x support"
 877         depends on PCI
 878         help
 879           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 880
 881           If unsure, say N.
 882
 883 config PATA_PDC_OLD
 884         tristate "Older Promise PATA controller support"
 885         depends on PCI
 886         help
 887           This option enables support for the Promise 20246, 20262, 20263,
 888           20265 and 20267 adapters.
 889
 890           If unsure, say N.
 891
 892 config PATA_RADISYS
 893         tristate "RADISYS 82600 PATA support (Experimental)"
 894         depends on PCI
 895         help
 896           This option enables support for the RADISYS 82600
 897           PATA controllers via the new ATA layer
 898
 899           If unsure, say N.
 900
 901 config PATA_RDC
 902         tristate "RDC PATA support"
 903         depends on PCI
 904         help
 905           This option enables basic support for the later RDC PATA controllers
 906           controllers via the new ATA layer. For the RDC 1010, you need to
 907           enable the IT821X driver instead.
 908
 909           If unsure, say N.
 910
 911 config PATA_SC1200
 912         tristate "SC1200 PATA support"
 913         depends on PCI && (X86_32 || COMPILE_TEST)
 914         help
 915           This option enables support for the NatSemi/AMD SC1200 SoC
 916           companion chip used with the Geode processor family.
 917
 918           If unsure, say N.
 919
 920 config PATA_SCH
 921         tristate "Intel SCH PATA support"
 922         depends on PCI
 923         help
 924           This option enables support for Intel SCH PATA on the Intel
 925           SCH (US15W, US15L, UL11L) series host controllers.
 926
 927           If unsure, say N.
 928
 929 config PATA_SERVERWORKS
 930         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 931         depends on PCI
 932         help
 933           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 934           HT1000 PATA controllers, via the new ATA layer.
 935
 936           If unsure, say N.
 937
 938 config PATA_SIL680
 939         tristate "CMD / Silicon Image 680 PATA support"
 940         depends on PCI
 941         help
 942           This option enables support for CMD / Silicon Image 680 PATA.
 943
 944           If unsure, say N.
 945
 946 config PATA_SIS
 947         tristate "SiS PATA support"
 948         depends on PCI
 949         help
 950           This option enables support for SiS PATA controllers
 951
 952           If unsure, say N.
 953
 954 config PATA_TOSHIBA
 955         tristate "Toshiba Piccolo support (Experimental)"
 956         depends on PCI
 957         help
 958           Support for the Toshiba Piccolo controllers. Currently only the
 959           primary channel is supported by this driver.
 960
 961           If unsure, say N.
 962
 963 config PATA_TRIFLEX
 964         tristate "Compaq Triflex PATA support"
 965         depends on PCI
 966         help
 967           Enable support for the Compaq 'Triflex' IDE controller as found
 968           on many Compaq Pentium-Pro systems, via the new ATA layer.
 969
 970           If unsure, say N.
 971
 972 config PATA_VIA
 973         tristate "VIA PATA support"
 974         depends on PCI
 975         select PATA_TIMINGS
 976         help
 977           This option enables support for the VIA PATA interfaces
 978           found on the many VIA chipsets.
 979
 980           If unsure, say N.
 981
 982 config PATA_PXA
 983         tristate "PXA DMA-capable PATA support"
 984         depends on ARCH_PXA
 985         help
 986           This option enables support for harddrive attached to PXA CPU's bus.
 987
 988           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 989                 is not capable of doing MWDMA, use pata_platform instead.
 990
 991           If unsure, say N.
 992
 993 config PATA_WINBOND
 994         tristate "Winbond SL82C105 PATA support"
 995         depends on PCI
 996         help
 997           This option enables support for SL82C105 PATA devices found in the
 998           Netwinder and some other systems
 999
1000           If unsure, say N.
1001
1002 endif # ATA_BMDMA
1003
1004 comment "PIO-only SFF controllers"
1005
1006 config PATA_CMD640_PCI
1007         tristate "CMD640 PCI PATA support (Experimental)"
1008         depends on PCI
1009         select PATA_TIMINGS
1010         help
1011           This option enables support for the CMD640 PCI IDE
1012           interface chip. Only the primary channel is currently
1013           supported.
1014
1015           If unsure, say N.
1016
1017 config PATA_FALCON
1018         tristate "Atari Falcon PATA support"
1019         depends on M68K && ATARI
1020         help
1021           This option enables support for the on-board IDE
1022           interface on the Atari Falcon.
1023
1024           If unsure, say N.
1025
1026 config PATA_GAYLE
1027         tristate "Amiga Gayle PATA support"
1028         depends on M68K && AMIGA
1029         help
1030           This option enables support for the on-board IDE
1031           interfaces on some Amiga models (A600, A1200,
1032           A4000 and A4000T) and also for IDE interfaces on
1033           the Zorro expansion bus (M-Tech E-Matrix 530
1034           expansion card).
1035
1036           If unsure, say N.
1037
1038 config PATA_BUDDHA
1039         tristate "Buddha/Catweasel/X-Surf PATA support"
1040         depends on ZORRO
1041         help
1042           This option enables support for the IDE interfaces
1043           on the Buddha, Catweasel and X-Surf expansion boards
1044           on the Zorro expansion bus. It supports up to two
1045           interfaces on the Buddha, three on the Catweasel and
1046           two on the X-Surf.
1047
1048           If unsure, say N.
1049
1050 config PATA_ISAPNP
1051         tristate "ISA Plug and Play PATA support"
1052         depends on ISAPNP
1053         help
1054           This option enables support for ISA plug & play ATA
1055           controllers such as those found on old soundcards.
1056
1057           If unsure, say N.
1058
1059 config PATA_IXP4XX_CF
1060         tristate "IXP4XX Compact Flash support"
1061         depends on ARCH_IXP4XX
1062         help
1063           This option enables support for a Compact Flash connected on
1064           the ixp4xx expansion bus. This driver had been written for
1065           Loft/Avila boards in mind but can work with others.
1066
1067           If unsure, say N.
1068
1069 config PATA_MPIIX
1070         tristate "Intel PATA MPIIX support"
1071         depends on PCI
1072         help
1073           This option enables support for MPIIX PATA support.
1074
1075           If unsure, say N.
1076
1077 config PATA_NS87410
1078         tristate "Nat Semi NS87410 PATA support"
1079         depends on PCI
1080         select PATA_TIMINGS
1081         help
1082           This option enables support for the National Semiconductor
1083           NS87410 PCI-IDE controller.
1084
1085           If unsure, say N.
1086
1087 config PATA_OPTI
1088         tristate "OPTI621/6215 PATA support (Very Experimental)"
1089         depends on PCI
1090         help
1091           This option enables full PIO support for the early Opti ATA
1092           controllers found on some old motherboards.
1093
1094           If unsure, say N.
1095
1096 config PATA_PALMLD
1097         tristate "Palm LifeDrive PATA support"
1098         depends on MACH_PALMLD
1099         help
1100           This option enables support for Palm LifeDrive's internal ATA
1101           port via the new ATA layer.
1102
1103           If unsure, say N.
1104
1105 config PATA_PCMCIA
1106         tristate "PCMCIA PATA support"
1107         depends on PCMCIA
1108         help
1109           This option enables support for PCMCIA ATA interfaces, including
1110           compact flash card adapters via the new ATA layer.
1111
1112           If unsure, say N.
1113
1114 config PATA_PLATFORM
1115         tristate "Generic platform device PATA support"
1116         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
1117         help
1118           This option enables support for generic directly connected ATA
1119           devices commonly found on embedded systems.
1120
1121           If unsure, say N.
1122
1123 config PATA_OF_PLATFORM
1124         tristate "OpenFirmware platform device PATA support"
1125         depends on PATA_PLATFORM && OF
1126         help
1127           This option enables support for generic directly connected ATA
1128           devices commonly found on embedded systems with OpenFirmware
1129           bindings.
1130
1131           If unsure, say N.
1132
1133 config PATA_QDI
1134         tristate "QDI VLB PATA support"
1135         depends on ISA
1136         select PATA_LEGACY
1137         help
1138           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1139
1140 config PATA_RB532
1141         tristate "RouterBoard 532 PATA CompactFlash support"
1142         depends on MIKROTIK_RB532
1143         help
1144           This option enables support for the RouterBoard 532
1145           PATA CompactFlash controller.
1146
1147           If unsure, say N.
1148
1149 config PATA_RZ1000
1150         tristate "PC Tech RZ1000 PATA support"
1151         depends on PCI
1152         help
1153           This option enables basic support for the PC Tech RZ1000/1
1154           PATA controllers via the new ATA layer
1155
1156           If unsure, say N.
1157
1158 config PATA_SAMSUNG_CF
1159         tristate "Samsung SoC PATA support"
1160         depends on SAMSUNG_DEV_IDE
1161         select PATA_TIMINGS
1162         help
1163           This option enables basic support for Samsung's S3C/S5P board
1164           PATA controllers via the new ATA layer
1165
1166           If unsure, say N.
1167
1168 config PATA_WINBOND_VLB
1169         tristate "Winbond W83759A VLB PATA support (Experimental)"
1170         depends on ISA
1171         select PATA_LEGACY
1172         help
1173           Support for the Winbond W83759A controller on Vesa Local Bus
1174           systems.
1175
1176 comment "Generic fallback / legacy drivers"
1177
1178 config PATA_ACPI
1179         tristate "ACPI firmware driver for PATA"
1180         depends on ATA_ACPI && ATA_BMDMA && PCI
1181         select PATA_TIMINGS
1182         help
1183           This option enables an ACPI method driver which drives
1184           motherboard PATA controller interfaces through the ACPI
1185           firmware in the BIOS. This driver can sometimes handle
1186           otherwise unsupported hardware.
1187
1188 config ATA_GENERIC
1189         tristate "Generic ATA support"
1190         depends on PCI && ATA_BMDMA
1191         select SATA_HOST
1192         help
1193           This option enables support for generic BIOS configured
1194           ATA controllers via the new ATA layer
1195
1196           If unsure, say N.
1197
1198 config PATA_LEGACY
1199         tristate "Legacy ISA PATA support (Experimental)"
1200         depends on (ISA || PCI)
1201         select PATA_TIMINGS
1202         help
1203           This option enables support for ISA/VLB/PCI bus legacy PATA
1204           ports and allows them to be accessed via the new ATA layer.
1205
1206           If unsure, say N.
1207
1208 endif # ATA_SFF
1209 endif # ATA