2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
20 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
21 any other ATA device under Linux, say Y and make sure that you know
22 the name of your ATA host adapter (the card inside your computer
23 that "speaks" the ATA protocol, also called ATA controller),
24 because you will be asked for it.
26 NOTE: ATA enables basic SCSI support; *however*,
27 'SCSI disk support', 'SCSI tape support', or
28 'SCSI CDROM support' may also be needed,
29 depending on your hardware configuration.
33 config ATA_NONSTANDARD
37 config ATA_VERBOSE_ERROR
38 bool "Verbose ATA error reporting"
41 This option adds parsing of ATA command descriptions and error bits
42 in libata kernel output, making it easier to interpret.
43 This option will enlarge the kernel by approx. 6KB. Disable it only
44 if kernel size is more important than ease of debugging.
49 bool "ATA ACPI Support"
50 depends on ACPI && PCI
53 This option adds support for ATA-related ACPI objects.
54 These ACPI objects add the ability to retrieve taskfiles
55 from the ACPI BIOS and write them to the disk controller.
56 These objects may be related to performance, security,
57 power management, or other areas.
58 You can disable this at kernel boot time by using the
59 option libata.noacpi=1
62 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
63 depends on ATA_ACPI && PM_RUNTIME
66 This option adds support for SATA Zero Power Optical Disc
67 Drive (ZPODD). It requires both the ODD and the platform
68 support, and if enabled, will automatically power on/off the
69 ODD when certain condition is satisfied. This does not impact
70 end user's experience of the ODD, only power is saved when
71 the ODD is not in use (i.e. no disc inside).
76 bool "SATA Port Multiplier support"
79 This option adds support for SATA Port Multipliers
80 (the SATA version of an ethernet hub, or SAS expander).
82 comment "Controllers with non-SFF native interface"
85 tristate "AHCI SATA support"
88 This option enables support for AHCI Serial ATA.
92 config SATA_AHCI_PLATFORM
93 tristate "Platform AHCI SATA support"
95 This option enables support for Platform AHCI Serial ATA
101 tristate "ST AHCI SATA support"
102 depends on SATA_AHCI_PLATFORM
105 This option enables support for ST AHCI SATA controller.
110 tristate "Freescale i.MX AHCI SATA support"
111 depends on SATA_AHCI_PLATFORM && MFD_SYSCON
113 This option enables support for the Freescale i.MX SoC's
119 tristate "Allwinner sunxi AHCI SATA support"
120 depends on ARCH_SUNXI && SATA_AHCI_PLATFORM
122 This option enables support for the Allwinner sunxi SoC's
128 tristate "Freescale 3.0Gbps SATA support"
131 This option enables support for Freescale 3.0Gbps SATA controller.
132 It can be found on MPC837x and MPC8315.
137 tristate "Initio 162x SATA support (Very Experimental)"
140 This option enables support for Initio 162x Serial ATA.
142 config SATA_ACARD_AHCI
143 tristate "ACard AHCI variant (ATP 8620)"
146 This option enables support for Acard.
151 tristate "Silicon Image 3124/3132 SATA support"
154 This option enables support for Silicon Image 3124/3132 Serial ATA.
159 bool "ATA SFF support (for legacy IDE and PATA)"
162 This option adds support for ATA controllers with SFF
163 compliant or similar programming interface.
165 SFF is the legacy IDE interface that has been around since
166 the dawn of time. Almost all PATA controllers have an
167 SFF interface. Many SATA controllers have an SFF interface
168 when configured into a legacy compatibility mode.
170 For users with exclusively modern controllers like AHCI,
171 Silicon Image 3124, or Marvell 6440, you may choose to
172 disable this unneeded SFF support.
178 comment "SFF controllers with custom DMA interface"
181 tristate "Pacific Digital ADMA support"
184 This option enables support for Pacific Digital ADMA controllers
188 config PATA_OCTEON_CF
189 tristate "OCTEON Boot Bus Compact Flash support"
190 depends on CAVIUM_OCTEON_SOC
192 This option enables a polled compact flash driver for use with
193 compact flash cards attached to the OCTEON boot bus.
198 tristate "Pacific Digital SATA QStor support"
201 This option enables support for Pacific Digital Serial ATA QStor.
206 tristate "Promise SATA SX4 support (Experimental)"
209 This option enables support for Promise Serial ATA SX4.
214 bool "ATA BMDMA support"
217 This option adds support for SFF ATA controllers with BMDMA
218 capability. BMDMA stands for bus-master DMA and is the
219 de facto DMA interface for SFF controllers.
225 comment "SATA SFF controllers with BMDMA"
228 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
231 This option enables support for ICH5/6/7/8 Serial ATA
232 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
238 tristate "DesignWare Cores SATA support"
241 This option enables support for the on-chip SATA controller of the
242 AppliedMicro processor 460EX.
246 config SATA_DWC_DEBUG
247 bool "Debugging driver version"
250 This option enables debugging output in the driver.
252 config SATA_DWC_VDEBUG
253 bool "Verbose debug output"
254 depends on SATA_DWC_DEBUG
256 This option enables the taskfile dumping and NCQ debugging.
259 tristate "Calxeda Highbank SATA support"
261 This option enables support for the Calxeda Highbank SoC's
267 tristate "Marvell SATA support"
269 This option enables support for the Marvell Serial ATA family.
270 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
271 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
276 tristate "NVIDIA SATA support"
279 This option enables support for NVIDIA Serial ATA.
284 tristate "Promise SATA TX2/TX4 support"
287 This option enables support for Promise Serial ATA TX2/TX4.
292 tristate "Renesas R-Car SATA support"
294 This option enables support for Renesas R-Car Serial ATA.
299 tristate "Silicon Image SATA support"
302 This option enables support for Silicon Image Serial ATA.
307 tristate "SiS 964/965/966/180 SATA support"
311 This option enables support for SiS Serial ATA on
312 SiS 964/965/966/180 and Parallel ATA on SiS 180.
313 The PATA support for SiS 180 requires additionally to
314 enable the PATA_SIS driver in the config.
318 tristate "ServerWorks Frodo / Apple K2 SATA support"
321 This option enables support for Broadcom/Serverworks/Apple K2
327 tristate "ULi Electronics SATA support"
330 This option enables support for ULi Electronics SATA.
335 tristate "VIA SATA support"
338 This option enables support for VIA Serial ATA.
343 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
346 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
350 comment "PATA SFF controllers with BMDMA"
353 tristate "ALi PATA support"
356 This option enables support for the ALi ATA interfaces
357 found on the many ALi chipsets.
362 tristate "AMD/NVidia PATA support"
365 This option enables support for the AMD and NVidia PATA
366 interfaces found on the chipsets for Athlon/Athlon64.
370 config PATA_ARASAN_CF
371 tristate "ARASAN CompactFlash PATA Controller Support"
372 depends on DMADEVICES
375 Say Y here to support the ARASAN CompactFlash PATA controller
378 tristate "ARTOP 6210/6260 PATA support"
381 This option enables support for ARTOP PATA controllers.
386 tristate "ATI PATA support"
389 This option enables support for the ATI ATA interfaces
390 found on the many ATI chipsets.
395 tristate "ARTOP/Acard ATP867X PATA support"
398 This option enables support for ARTOP/Acard ATP867X PATA
404 tristate "Blackfin 54x ATAPI support"
405 depends on BF542 || BF548 || BF549
407 This option enables support for the built-in ATAPI controller on
408 Blackfin 54x family chips.
413 tristate "CMD64x PATA support"
416 This option enables support for the CMD64x series chips
417 except for the CMD640.
422 tristate "CS5510/5520 PATA support"
423 depends on PCI && (X86_32 || COMPILE_TEST)
425 This option enables support for the Cyrix 5510/5520
426 companion chip used with the MediaGX/Geode processor family.
431 tristate "CS5530 PATA support"
432 depends on PCI && (X86_32 || COMPILE_TEST)
434 This option enables support for the Cyrix/NatSemi/AMD CS5530
435 companion chip used with the MediaGX/Geode processor family.
440 tristate "CS5535 PATA support (Experimental)"
441 depends on PCI && X86_32
443 This option enables support for the NatSemi/AMD CS5535
444 companion chip used with the Geode processor family.
449 tristate "CS5536 PATA support"
450 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
452 This option enables support for the AMD CS5536
453 companion chip used with the Geode LX processor family.
458 tristate "Cypress CY82C693 PATA support (Very Experimental)"
461 This option enables support for the Cypress/Contaq CY82C693
462 chipset found in some Alpha systems
467 tristate "EFAR SLC90E66 support"
470 This option enables support for the EFAR SLC90E66
471 IDE controller found on some older machines.
476 tristate "Cirrus Logic EP93xx PATA support"
477 depends on ARCH_EP93XX
479 This option enables support for the PATA controller in
480 the Cirrus Logic EP9312 and EP9315 ARM CPU.
485 tristate "HPT 366/368 PATA support"
488 This option enables support for the HPT 366 and 368
489 PATA controllers via the new ATA layer.
494 tristate "HPT 370/370A/371/372/374/302 PATA support"
497 This option enables support for the majority of the later HPT
498 PATA controllers via the new ATA layer.
503 tristate "HPT 371N/372N/302N PATA support"
506 This option enables support for the N variant HPT PATA
507 controllers via the new ATA layer.
512 tristate "HPT 343/363 PATA support"
515 This option enables support for the HPT 343/363
516 PATA controllers via the new ATA layer
520 config PATA_HPT3X3_DMA
521 bool "HPT 343/363 DMA support"
522 depends on PATA_HPT3X3
524 This option enables DMA support for the HPT343/363
525 controllers. Enable with care as there are still some
526 problems with DMA on this chipset.
529 tristate "Acorn ICS PATA support"
530 depends on ARM && ARCH_ACORN
532 On Acorn systems, say Y here if you wish to use the ICS PATA
533 interface card. This is not required for ICS partition support.
534 If you are unsure, say N to this.
537 tristate "PATA support for Freescale iMX"
540 This option enables support for the PATA host available on Freescale
546 tristate "IT8213 PATA support (Experimental)"
549 This option enables support for the ITE 821 PATA
550 controllers via the new ATA layer.
555 tristate "IT8211/2 PATA support"
558 This option enables support for the ITE 8211 and 8212
559 PATA controllers via the new ATA layer, including RAID
565 tristate "JMicron PATA support"
568 Enable support for the JMicron IDE controller, via the new
574 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
577 Most IDE capable PowerMacs have IDE busses driven by a variant
578 of this controller which is part of the Apple chipset used on
579 most PowerMac models. Some models have multiple busses using
580 different chipsets, though generally, MacIO is one of them.
583 tristate "Marvell PATA support via legacy mode"
586 This option enables limited support for the Marvell 88SE61xx ATA
587 controllers. If you wish to use only the SATA ports then select
588 the AHCI driver alone. If you wish to the use the PATA port or
589 both SATA and PATA include this driver.
594 tristate "Freescale MPC52xx SoC internal IDE"
595 depends on PPC_MPC52xx && PPC_BESTCOMM
596 select PPC_BESTCOMM_ATA
598 This option enables support for integrated IDE controller
599 of the Freescale MPC52xx SoC.
604 tristate "NETCELL Revolution RAID support"
607 This option enables support for the Netcell Revolution RAID
613 tristate "Ninja32/Delkin Cardbus ATA support"
616 This option enables support for the Ninja32, Delkin and
617 possibly other brands of Cardbus ATA adapter
622 tristate "Nat Semi NS87415 PATA support"
625 This option enables support for the National Semiconductor
626 NS87415 PCI-IDE controller.
631 tristate "Intel PATA old PIIX support"
634 This option enables support for early PIIX PATA support.
639 tristate "OPTI FireStar PATA support (Very Experimental)"
642 This option enables DMA/PIO support for the later OPTi
643 controllers found on some old motherboards and in some
649 tristate "Promise PATA 2027x support"
652 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
657 tristate "Older Promise PATA controller support"
660 This option enables support for the Promise 20246, 20262, 20263,
661 20265 and 20267 adapters.
666 tristate "RADISYS 82600 PATA support (Experimental)"
669 This option enables support for the RADISYS 82600
670 PATA controllers via the new ATA layer
675 tristate "RDC PATA support"
678 This option enables basic support for the later RDC PATA controllers
679 controllers via the new ATA layer. For the RDC 1010, you need to
680 enable the IT821X driver instead.
685 tristate "SC1200 PATA support"
686 depends on PCI && (X86_32 || COMPILE_TEST)
688 This option enables support for the NatSemi/AMD SC1200 SoC
689 companion chip used with the Geode processor family.
694 tristate "Toshiba's Cell Reference Set IDE support"
695 depends on PCI && PPC_CELLEB
697 This option enables support for the built-in IDE controller on
698 Toshiba Cell Reference Board.
703 tristate "Intel SCH PATA support"
706 This option enables support for Intel SCH PATA on the Intel
707 SCH (US15W, US15L, UL11L) series host controllers.
711 config PATA_SERVERWORKS
712 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
715 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
716 HT1000 PATA controllers, via the new ATA layer.
721 tristate "CMD / Silicon Image 680 PATA support"
724 This option enables support for CMD / Silicon Image 680 PATA.
729 tristate "SiS PATA support"
732 This option enables support for SiS PATA controllers
737 tristate "Toshiba Piccolo support (Experimental)"
740 Support for the Toshiba Piccolo controllers. Currently only the
741 primary channel is supported by this driver.
746 tristate "Compaq Triflex PATA support"
749 Enable support for the Compaq 'Triflex' IDE controller as found
750 on many Compaq Pentium-Pro systems, via the new ATA layer.
755 tristate "VIA PATA support"
758 This option enables support for the VIA PATA interfaces
759 found on the many VIA chipsets.
764 tristate "PXA DMA-capable PATA support"
767 This option enables support for harddrive attached to PXA CPU's bus.
769 NOTE: This driver utilizes PXA DMA controller, in case your hardware
770 is not capable of doing MWDMA, use pata_platform instead.
775 tristate "Winbond SL82C105 PATA support"
778 This option enables support for SL82C105 PATA devices found in the
779 Netwinder and some other systems
785 comment "PIO-only SFF controllers"
788 tristate "Atmel AVR32 PATA support (Experimental)"
789 depends on AVR32 && PLATFORM_AT32AP
791 This option enables support for the IDE devices on the
792 Atmel AT32AP platform.
797 tristate "PATA support for AT91SAM9260"
798 depends on ARM && ARCH_AT91
800 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
804 config PATA_CMD640_PCI
805 tristate "CMD640 PCI PATA support (Experimental)"
808 This option enables support for the CMD640 PCI IDE
809 interface chip. Only the primary channel is currently
815 tristate "ISA Plug and Play PATA support"
818 This option enables support for ISA plug & play ATA
819 controllers such as those found on old soundcards.
823 config PATA_IXP4XX_CF
824 tristate "IXP4XX Compact Flash support"
825 depends on ARCH_IXP4XX
827 This option enables support for a Compact Flash connected on
828 the ixp4xx expansion bus. This driver had been written for
829 Loft/Avila boards in mind but can work with others.
834 tristate "Intel PATA MPIIX support"
837 This option enables support for MPIIX PATA support.
842 tristate "Nat Semi NS87410 PATA support"
845 This option enables support for the National Semiconductor
846 NS87410 PCI-IDE controller.
851 tristate "OPTI621/6215 PATA support (Very Experimental)"
854 This option enables full PIO support for the early Opti ATA
855 controllers found on some old motherboards.
860 tristate "Palm LifeDrive PATA support"
861 depends on MACH_PALMLD
863 This option enables support for Palm LifeDrive's internal ATA
864 port via the new ATA layer.
869 tristate "PCMCIA PATA support"
872 This option enables support for PCMCIA ATA interfaces, including
873 compact flash card adapters via the new ATA layer.
878 tristate "Generic platform device PATA support"
879 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
881 This option enables support for generic directly connected ATA
882 devices commonly found on embedded systems.
886 config PATA_OF_PLATFORM
887 tristate "OpenFirmware platform device PATA support"
888 depends on PATA_PLATFORM && OF
890 This option enables support for generic directly connected ATA
891 devices commonly found on embedded systems with OpenFirmware
897 tristate "QDI VLB PATA support"
901 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
904 tristate "RouterBoard 532 PATA CompactFlash support"
905 depends on MIKROTIK_RB532
907 This option enables support for the RouterBoard 532
908 PATA CompactFlash controller.
913 tristate "PC Tech RZ1000 PATA support"
916 This option enables basic support for the PC Tech RZ1000/1
917 PATA controllers via the new ATA layer
921 config PATA_SAMSUNG_CF
922 tristate "Samsung SoC PATA support"
923 depends on SAMSUNG_DEV_IDE
925 This option enables basic support for Samsung's S3C/S5P board
926 PATA controllers via the new ATA layer
930 config PATA_WINBOND_VLB
931 tristate "Winbond W83759A VLB PATA support (Experimental)"
935 Support for the Winbond W83759A controller on Vesa Local Bus
938 comment "Generic fallback / legacy drivers"
941 tristate "ACPI firmware driver for PATA"
942 depends on ATA_ACPI && ATA_BMDMA
944 This option enables an ACPI method driver which drives
945 motherboard PATA controller interfaces through the ACPI
946 firmware in the BIOS. This driver can sometimes handle
947 otherwise unsupported hardware.
950 tristate "Generic ATA support"
951 depends on PCI && ATA_BMDMA
953 This option enables support for generic BIOS configured
954 ATA controllers via the new ATA layer
959 tristate "Legacy ISA PATA support (Experimental)"
960 depends on (ISA || PCI)
962 This option enables support for ISA/VLB/PCI bus legacy PATA
963 ports and allows them to be accessed via the new ATA layer.