drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA and Parallel ATA drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         select SCSI
  11         ---help---
  12           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  13           any other ATA device under Linux, say Y and make sure that you know
  14           the name of your ATA host adapter (the card inside your computer
  15           that "speaks" the ATA protocol, also called ATA controller),
  16           because you will be asked for it.
  17
  18           NOTE: ATA enables basic SCSI support; *however*,
  19           'SCSI disk support', 'SCSI tape support', or
  20           'SCSI CDROM support' may also be needed,
  21           depending on your hardware configuration.
  22
  23 if ATA
  24
  25 config ATA_NONSTANDARD
  26        bool
  27        default n
  28
  29 config ATA_VERBOSE_ERROR
  30         bool "Verbose ATA error reporting"
  31         default y
  32         help
  33           This option adds parsing of ATA command descriptions and error bits
  34           in libata kernel output, making it easier to interpret.
  35           This option will enlarge the kernel by approx. 6KB. Disable it only
  36           if kernel size is more important than ease of debugging.
  37
  38           If unsure, say Y.
  39
  40 config ATA_ACPI
  41         bool "ATA ACPI Support"
  42         depends on ACPI && PCI
  43         default y
  44         help
  45           This option adds support for ATA-related ACPI objects.
  46           These ACPI objects add the ability to retrieve taskfiles
  47           from the ACPI BIOS and write them to the disk controller.
  48           These objects may be related to performance, security,
  49           power management, or other areas.
  50           You can disable this at kernel boot time by using the
  51           option libata.noacpi=1
  52
  53 config SATA_PMP
  54         bool "SATA Port Multiplier support"
  55         default y
  56         help
  57           This option adds support for SATA Port Multipliers
  58           (the SATA version of an ethernet hub, or SAS expander).
  59
  60 comment "Controllers with non-SFF native interface"
  61
  62 config SATA_AHCI
  63         tristate "AHCI SATA support"
  64         depends on PCI
  65         help
  66           This option enables support for AHCI Serial ATA.
  67
  68           If unsure, say N.
  69
  70 config SATA_AHCI_PLATFORM
  71         tristate "Platform AHCI SATA support"
  72         help
  73           This option enables support for Platform AHCI Serial ATA
  74           controllers.
  75
  76           If unsure, say N.
  77
  78 config SATA_FSL
  79         tristate "Freescale 3.0Gbps SATA support"
  80         depends on FSL_SOC
  81         help
  82           This option enables support for Freescale 3.0Gbps SATA controller.
  83           It can be found on MPC837x and MPC8315.
  84
  85           If unsure, say N.
  86
  87 config SATA_INIC162X
  88         tristate "Initio 162x SATA support"
  89         depends on PCI
  90         help
  91           This option enables support for Initio 162x Serial ATA.
  92
  93 config SATA_SIL24
  94         tristate "Silicon Image 3124/3132 SATA support"
  95         depends on PCI
  96         help
  97           This option enables support for Silicon Image 3124/3132 Serial ATA.
  98
  99           If unsure, say N.
 100
 101 config ATA_SFF
 102         bool "ATA SFF support"
 103         default y
 104         help
 105           This option adds support for ATA controllers with SFF
 106           compliant or similar programming interface.
 107
 108           SFF is the legacy IDE interface that has been around since
 109           the dawn of time.  Almost all PATA controllers have an
 110           SFF interface.  Many SATA controllers have an SFF interface
 111           when configured into a legacy compatibility mode.
 112
 113           For users with exclusively modern controllers like AHCI,
 114           Silicon Image 3124, or Marvell 6440, you may choose to
 115           disable this unneeded SFF support.
 116
 117           If unsure, say Y.
 118
 119 if ATA_SFF
 120
 121 comment "SFF controllers with custom DMA interface"
 122
 123 config PDC_ADMA
 124         tristate "Pacific Digital ADMA support"
 125         depends on PCI
 126         help
 127           This option enables support for Pacific Digital ADMA controllers
 128
 129           If unsure, say N.
 130
 131 config PATA_OCTEON_CF
 132         tristate "OCTEON Boot Bus Compact Flash support"
 133         depends on CPU_CAVIUM_OCTEON
 134         help
 135           This option enables a polled compact flash driver for use with
 136           compact flash cards attached to the OCTEON boot bus.
 137
 138           If unsure, say N.
 139
 140 config SATA_QSTOR
 141         tristate "Pacific Digital SATA QStor support"
 142         depends on PCI
 143         help
 144           This option enables support for Pacific Digital Serial ATA QStor.
 145
 146           If unsure, say N.
 147
 148 config SATA_SX4
 149         tristate "Promise SATA SX4 support (Experimental)"
 150         depends on PCI && EXPERIMENTAL
 151         help
 152           This option enables support for Promise Serial ATA SX4.
 153
 154           If unsure, say N.
 155
 156 config ATA_BMDMA
 157         bool "ATA BMDMA support"
 158         default y
 159         help
 160           This option adds support for SFF ATA controllers with BMDMA
 161           capability.  BMDMA stands for bus-master DMA and is the
 162           de facto DMA interface for SFF controllers.
 163
 164           If unsure, say Y.
 165
 166 if ATA_BMDMA
 167
 168 comment "SATA SFF controllers with BMDMA"
 169
 170 config ATA_PIIX
 171         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 172         depends on PCI
 173         help
 174           This option enables support for ICH5/6/7/8 Serial ATA
 175           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 176           host controllers.
 177
 178           If unsure, say N.
 179
 180 config SATA_DWC
 181         tristate "DesignWare Cores SATA support"
 182         depends on 460EX
 183         help
 184           This option enables support for the on-chip SATA controller of the
 185           AppliedMicro processor 460EX.
 186
 187           If unsure, say N.
 188
 189 config SATA_MV
 190         tristate "Marvell SATA support"
 191         help
 192           This option enables support for the Marvell Serial ATA family.
 193           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 194           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 195
 196           If unsure, say N.
 197
 198 config SATA_NV
 199         tristate "NVIDIA SATA support"
 200         depends on PCI
 201         help
 202           This option enables support for NVIDIA Serial ATA.
 203
 204           If unsure, say N.
 205
 206 config SATA_PROMISE
 207         tristate "Promise SATA TX2/TX4 support"
 208         depends on PCI
 209         help
 210           This option enables support for Promise Serial ATA TX2/TX4.
 211
 212           If unsure, say N.
 213
 214 config SATA_SIL
 215         tristate "Silicon Image SATA support"
 216         depends on PCI
 217         help
 218           This option enables support for Silicon Image Serial ATA.
 219
 220           If unsure, say N.
 221
 222 config SATA_SIS
 223         tristate "SiS 964/965/966/180 SATA support"
 224         depends on PCI
 225         select PATA_SIS
 226         help
 227           This option enables support for SiS Serial ATA on
 228           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 229           The PATA support for SiS 180 requires additionally to
 230           enable the PATA_SIS driver in the config.
 231           If unsure, say N.
 232
 233 config SATA_SVW
 234         tristate "ServerWorks Frodo / Apple K2 SATA support"
 235         depends on PCI
 236         help
 237           This option enables support for Broadcom/Serverworks/Apple K2
 238           SATA support.
 239
 240           If unsure, say N.
 241
 242 config SATA_ULI
 243         tristate "ULi Electronics SATA support"
 244         depends on PCI
 245         help
 246           This option enables support for ULi Electronics SATA.
 247
 248           If unsure, say N.
 249
 250 config SATA_VIA
 251         tristate "VIA SATA support"
 252         depends on PCI
 253         help
 254           This option enables support for VIA Serial ATA.
 255
 256           If unsure, say N.
 257
 258 config SATA_VITESSE
 259         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 260         depends on PCI
 261         help
 262           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 263
 264           If unsure, say N.
 265
 266 comment "PATA SFF controllers with BMDMA"
 267
 268 config PATA_ALI
 269         tristate "ALi PATA support"
 270         depends on PCI
 271         help
 272           This option enables support for the ALi ATA interfaces
 273           found on the many ALi chipsets.
 274
 275           If unsure, say N.
 276
 277 config PATA_AMD
 278         tristate "AMD/NVidia PATA support"
 279         depends on PCI
 280         help
 281           This option enables support for the AMD and NVidia PATA
 282           interfaces found on the chipsets for Athlon/Athlon64.
 283
 284           If unsure, say N.
 285
 286 config PATA_ARTOP
 287         tristate "ARTOP 6210/6260 PATA support"
 288         depends on PCI
 289         help
 290           This option enables support for ARTOP PATA controllers.
 291
 292           If unsure, say N.
 293
 294 config PATA_ATIIXP
 295         tristate "ATI PATA support"
 296         depends on PCI
 297         help
 298           This option enables support for the ATI ATA interfaces
 299           found on the many ATI chipsets.
 300
 301           If unsure, say N.
 302
 303 config PATA_ATP867X
 304         tristate "ARTOP/Acard ATP867X PATA support"
 305         depends on PCI
 306         help
 307           This option enables support for ARTOP/Acard ATP867X PATA
 308           controllers.
 309
 310           If unsure, say N.
 311
 312 config PATA_BF54X
 313         tristate "Blackfin 54x ATAPI support"
 314         depends on BF542 || BF548 || BF549
 315         help
 316           This option enables support for the built-in ATAPI controller on
 317           Blackfin 54x family chips.
 318
 319           If unsure, say N.
 320
 321 config PATA_CMD64X
 322         tristate "CMD64x PATA support"
 323         depends on PCI
 324         help
 325           This option enables support for the CMD64x series chips
 326           except for the CMD640.
 327
 328           If unsure, say N.
 329
 330 config PATA_CS5520
 331         tristate "CS5510/5520 PATA support"
 332         depends on PCI
 333         help
 334           This option enables support for the Cyrix 5510/5520
 335           companion chip used with the MediaGX/Geode processor family.
 336
 337           If unsure, say N.
 338
 339 config PATA_CS5530
 340         tristate "CS5530 PATA support"
 341         depends on PCI
 342         help
 343           This option enables support for the Cyrix/NatSemi/AMD CS5530
 344           companion chip used with the MediaGX/Geode processor family.
 345
 346           If unsure, say N.
 347
 348 config PATA_CS5535
 349         tristate "CS5535 PATA support (Experimental)"
 350         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 351         help
 352           This option enables support for the NatSemi/AMD CS5535
 353           companion chip used with the Geode processor family.
 354
 355           If unsure, say N.
 356
 357 config PATA_CS5536
 358         tristate "CS5536 PATA support"
 359         depends on PCI
 360         help
 361           This option enables support for the AMD CS5536
 362           companion chip used with the Geode LX processor family.
 363
 364           If unsure, say N.
 365
 366 config PATA_CYPRESS
 367         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 368         depends on PCI && EXPERIMENTAL
 369         help
 370           This option enables support for the Cypress/Contaq CY82C693
 371           chipset found in some Alpha systems
 372
 373           If unsure, say N.
 374
 375 config PATA_EFAR
 376         tristate "EFAR SLC90E66 support"
 377         depends on PCI
 378         help
 379           This option enables support for the EFAR SLC90E66
 380           IDE controller found on some older machines.
 381
 382           If unsure, say N.
 383
 384 config PATA_HPT366
 385         tristate "HPT 366/368 PATA support"
 386         depends on PCI
 387         help
 388           This option enables support for the HPT 366 and 368
 389           PATA controllers via the new ATA layer.
 390
 391           If unsure, say N.
 392
 393 config PATA_HPT37X
 394         tristate "HPT 370/370A/371/372/374/302 PATA support"
 395         depends on PCI
 396         help
 397           This option enables support for the majority of the later HPT
 398           PATA controllers via the new ATA layer.
 399
 400           If unsure, say N.
 401
 402 config PATA_HPT3X2N
 403         tristate "HPT 372N/302N PATA support"
 404         depends on PCI
 405         help
 406           This option enables support for the N variant HPT PATA
 407           controllers via the new ATA layer
 408
 409           If unsure, say N.
 410
 411 config PATA_HPT3X3
 412         tristate "HPT 343/363 PATA support"
 413         depends on PCI
 414         help
 415           This option enables support for the HPT 343/363
 416           PATA controllers via the new ATA layer
 417
 418           If unsure, say N.
 419
 420 config PATA_HPT3X3_DMA
 421         bool "HPT 343/363 DMA support"
 422         depends on PATA_HPT3X3
 423         help
 424           This option enables DMA support for the HPT343/363
 425           controllers. Enable with care as there are still some
 426           problems with DMA on this chipset.
 427
 428 config PATA_ICSIDE
 429         tristate "Acorn ICS PATA support"
 430         depends on ARM && ARCH_ACORN
 431         help
 432           On Acorn systems, say Y here if you wish to use the ICS PATA
 433           interface card.  This is not required for ICS partition support.
 434           If you are unsure, say N to this.
 435
 436 config PATA_IT8213
 437         tristate "IT8213 PATA support (Experimental)"
 438         depends on PCI && EXPERIMENTAL
 439         help
 440           This option enables support for the ITE 821 PATA
 441           controllers via the new ATA layer.
 442
 443           If unsure, say N.
 444
 445 config PATA_IT821X
 446         tristate "IT8211/2 PATA support"
 447         depends on PCI
 448         help
 449           This option enables support for the ITE 8211 and 8212
 450           PATA controllers via the new ATA layer, including RAID
 451           mode.
 452
 453           If unsure, say N.
 454
 455 config PATA_JMICRON
 456         tristate "JMicron PATA support"
 457         depends on PCI
 458         help
 459           Enable support for the JMicron IDE controller, via the new
 460           ATA layer.
 461
 462           If unsure, say N.
 463
 464 config PATA_MACIO
 465         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 466         depends on PPC_PMAC
 467         help
 468           Most IDE capable PowerMacs have IDE busses driven by a variant
 469           of this controller which is part of the Apple chipset used on
 470           most PowerMac models. Some models have multiple busses using
 471           different chipsets, though generally, MacIO is one of them.
 472
 473 config PATA_MARVELL
 474         tristate "Marvell PATA support via legacy mode"
 475         depends on PCI
 476         help
 477           This option enables limited support for the Marvell 88SE61xx ATA
 478           controllers. If you wish to use only the SATA ports then select
 479           the AHCI driver alone. If you wish to the use the PATA port or
 480           both SATA and PATA include this driver.
 481
 482           If unsure, say N.
 483
 484 config PATA_MPC52xx
 485         tristate "Freescale MPC52xx SoC internal IDE"
 486         depends on PPC_MPC52xx && PPC_BESTCOMM
 487         select PPC_BESTCOMM_ATA
 488         help
 489           This option enables support for integrated IDE controller
 490           of the Freescale MPC52xx SoC.
 491
 492           If unsure, say N.
 493
 494 config PATA_NETCELL
 495         tristate "NETCELL Revolution RAID support"
 496         depends on PCI
 497         help
 498           This option enables support for the Netcell Revolution RAID
 499           PATA controller.
 500
 501           If unsure, say N.
 502
 503 config PATA_NINJA32
 504         tristate "Ninja32/Delkin Cardbus ATA support"
 505         depends on PCI
 506         help
 507           This option enables support for the Ninja32, Delkin and
 508           possibly other brands of Cardbus ATA adapter
 509
 510           If unsure, say N.
 511
 512 config PATA_NS87415
 513         tristate "Nat Semi NS87415 PATA support"
 514         depends on PCI
 515         help
 516           This option enables support for the National Semiconductor
 517           NS87415 PCI-IDE controller.
 518
 519           If unsure, say N.
 520
 521 config PATA_OLDPIIX
 522         tristate "Intel PATA old PIIX support"
 523         depends on PCI
 524         help
 525           This option enables support for early PIIX PATA support.
 526
 527           If unsure, say N.
 528
 529 config PATA_OPTIDMA
 530         tristate "OPTI FireStar PATA support (Very Experimental)"
 531         depends on PCI && EXPERIMENTAL
 532         help
 533           This option enables DMA/PIO support for the later OPTi
 534           controllers found on some old motherboards and in some
 535           laptops.
 536
 537           If unsure, say N.
 538
 539 config PATA_PDC2027X
 540         tristate "Promise PATA 2027x support"
 541         depends on PCI
 542         help
 543           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 544
 545           If unsure, say N.
 546
 547 config PATA_PDC_OLD
 548         tristate "Older Promise PATA controller support"
 549         depends on PCI
 550         help
 551           This option enables support for the Promise 20246, 20262, 20263,
 552           20265 and 20267 adapters.
 553
 554           If unsure, say N.
 555
 556 config PATA_RADISYS
 557         tristate "RADISYS 82600 PATA support (Experimental)"
 558         depends on PCI && EXPERIMENTAL
 559         help
 560           This option enables support for the RADISYS 82600
 561           PATA controllers via the new ATA layer
 562
 563           If unsure, say N.
 564
 565 config PATA_RDC
 566         tristate "RDC PATA support"
 567         depends on PCI
 568         help
 569           This option enables basic support for the later RDC PATA controllers
 570           controllers via the new ATA layer. For the RDC 1010, you need to
 571           enable the IT821X driver instead.
 572
 573           If unsure, say N.
 574
 575 config PATA_SC1200
 576         tristate "SC1200 PATA support"
 577         depends on PCI
 578         help
 579           This option enables support for the NatSemi/AMD SC1200 SoC
 580           companion chip used with the Geode processor family.
 581
 582           If unsure, say N.
 583
 584 config PATA_SCC
 585         tristate "Toshiba's Cell Reference Set IDE support"
 586         depends on PCI && PPC_CELLEB
 587         help
 588           This option enables support for the built-in IDE controller on
 589           Toshiba Cell Reference Board.
 590
 591           If unsure, say N.
 592
 593 config PATA_SCH
 594         tristate "Intel SCH PATA support"
 595         depends on PCI
 596         help
 597           This option enables support for Intel SCH PATA on the Intel
 598           SCH (US15W, US15L, UL11L) series host controllers.
 599
 600           If unsure, say N.
 601
 602 config PATA_SERVERWORKS
 603         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 604         depends on PCI
 605         help
 606           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 607           HT1000 PATA controllers, via the new ATA layer.
 608
 609           If unsure, say N.
 610
 611 config PATA_SIL680
 612         tristate "CMD / Silicon Image 680 PATA support"
 613         depends on PCI
 614         help
 615           This option enables support for CMD / Silicon Image 680 PATA.
 616
 617           If unsure, say N.
 618
 619 config PATA_SIS
 620         tristate "SiS PATA support"
 621         depends on PCI
 622         help
 623           This option enables support for SiS PATA controllers
 624
 625           If unsure, say N.
 626
 627 config PATA_TOSHIBA
 628         tristate "Toshiba Piccolo support (Experimental)"
 629         depends on PCI && EXPERIMENTAL
 630         help
 631           Support for the Toshiba Piccolo controllers. Currently only the
 632           primary channel is supported by this driver.
 633
 634           If unsure, say N.
 635
 636 config PATA_TRIFLEX
 637         tristate "Compaq Triflex PATA support"
 638         depends on PCI
 639         help
 640           Enable support for the Compaq 'Triflex' IDE controller as found
 641           on many Compaq Pentium-Pro systems, via the new ATA layer.
 642
 643           If unsure, say N.
 644
 645 config PATA_VIA
 646         tristate "VIA PATA support"
 647         depends on PCI
 648         help
 649           This option enables support for the VIA PATA interfaces
 650           found on the many VIA chipsets.
 651
 652           If unsure, say N.
 653
 654 config PATA_PXA
 655         tristate "PXA DMA-capable PATA support"
 656         depends on ARCH_PXA
 657         help
 658           This option enables support for harddrive attached to PXA CPU's bus.
 659
 660           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 661                 is not capable of doing MWDMA, use pata_platform instead.
 662
 663           If unsure, say N.
 664
 665 config PATA_WINBOND
 666         tristate "Winbond SL82C105 PATA support"
 667         depends on PCI
 668         help
 669           This option enables support for SL82C105 PATA devices found in the
 670           Netwinder and some other systems
 671
 672           If unsure, say N.
 673
 674 endif # ATA_BMDMA
 675
 676 comment "PIO-only SFF controllers"
 677
 678 config PATA_AT32
 679         tristate "Atmel AVR32 PATA support (Experimental)"
 680         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 681         help
 682           This option enables support for the IDE devices on the
 683           Atmel AT32AP platform.
 684
 685           If unsure, say N.
 686
 687 config PATA_AT91
 688         tristate "PATA support for AT91SAM9260"
 689         depends on ARM && ARCH_AT91
 690         help
 691           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 692
 693           If unsure, say N.
 694
 695 config PATA_CMD640_PCI
 696         tristate "CMD640 PCI PATA support (Experimental)"
 697         depends on PCI && EXPERIMENTAL
 698         help
 699           This option enables support for the CMD640 PCI IDE
 700           interface chip. Only the primary channel is currently
 701           supported.
 702
 703           If unsure, say N.
 704
 705 config PATA_ISAPNP
 706         tristate "ISA Plug and Play PATA support"
 707         depends on ISAPNP
 708         help
 709           This option enables support for ISA plug & play ATA
 710           controllers such as those found on old soundcards.
 711
 712           If unsure, say N.
 713
 714 config PATA_IXP4XX_CF
 715         tristate "IXP4XX Compact Flash support"
 716         depends on ARCH_IXP4XX
 717         help
 718           This option enables support for a Compact Flash connected on
 719           the ixp4xx expansion bus. This driver had been written for
 720           Loft/Avila boards in mind but can work with others.
 721
 722           If unsure, say N.
 723
 724 config PATA_MPIIX
 725         tristate "Intel PATA MPIIX support"
 726         depends on PCI
 727         help
 728           This option enables support for MPIIX PATA support.
 729
 730           If unsure, say N.
 731
 732 config PATA_NS87410
 733         tristate "Nat Semi NS87410 PATA support"
 734         depends on PCI
 735         help
 736           This option enables support for the National Semiconductor
 737           NS87410 PCI-IDE controller.
 738
 739           If unsure, say N.
 740
 741 config PATA_OPTI
 742         tristate "OPTI621/6215 PATA support (Very Experimental)"
 743         depends on PCI && EXPERIMENTAL
 744         help
 745           This option enables full PIO support for the early Opti ATA
 746           controllers found on some old motherboards.
 747
 748           If unsure, say N.
 749
 750 config PATA_PALMLD
 751         tristate "Palm LifeDrive PATA support"
 752         depends on MACH_PALMLD
 753         help
 754           This option enables support for Palm LifeDrive's internal ATA
 755           port via the new ATA layer.
 756
 757           If unsure, say N.
 758
 759 config PATA_PCMCIA
 760         tristate "PCMCIA PATA support"
 761         depends on PCMCIA
 762         help
 763           This option enables support for PCMCIA ATA interfaces, including
 764           compact flash card adapters via the new ATA layer.
 765
 766           If unsure, say N.
 767
 768 config HAVE_PATA_PLATFORM
 769         bool
 770         help
 771           This is an internal configuration node for any machine that
 772           uses pata-platform driver to enable the relevant driver in the
 773           configuration structure without having to submit endless patches
 774           to update the PATA_PLATFORM entry.
 775
 776 config PATA_PLATFORM
 777         tristate "Generic platform device PATA support"
 778         depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
 779         help
 780           This option enables support for generic directly connected ATA
 781           devices commonly found on embedded systems.
 782
 783           If unsure, say N.
 784
 785 config PATA_OF_PLATFORM
 786         tristate "OpenFirmware platform device PATA support"
 787         depends on PATA_PLATFORM && PPC_OF
 788         help
 789           This option enables support for generic directly connected ATA
 790           devices commonly found on embedded systems with OpenFirmware
 791           bindings.
 792
 793           If unsure, say N.
 794
 795 config PATA_QDI
 796         tristate "QDI VLB PATA support"
 797         depends on ISA
 798         help
 799           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 800
 801 config PATA_RB532
 802         tristate "RouterBoard 532 PATA CompactFlash support"
 803         depends on MIKROTIK_RB532
 804         help
 805           This option enables support for the RouterBoard 532
 806           PATA CompactFlash controller.
 807
 808           If unsure, say N.
 809
 810 config PATA_RZ1000
 811         tristate "PC Tech RZ1000 PATA support"
 812         depends on PCI
 813         help
 814           This option enables basic support for the PC Tech RZ1000/1
 815           PATA controllers via the new ATA layer
 816
 817           If unsure, say N.
 818
 819 config PATA_SAMSUNG_CF
 820         tristate "Samsung SoC PATA support"
 821         depends on SAMSUNG_DEV_IDE
 822         help
 823           This option enables basic support for Samsung's S3C/S5P board
 824           PATA controllers via the new ATA layer
 825
 826           If unsure, say N.
 827
 828 config PATA_WINBOND_VLB
 829         tristate "Winbond W83759A VLB PATA support (Experimental)"
 830         depends on ISA && EXPERIMENTAL
 831         select PATA_LEGACY
 832         help
 833           Support for the Winbond W83759A controller on Vesa Local Bus
 834           systems.
 835
 836 comment "Generic fallback / legacy drivers"
 837
 838 config PATA_ACPI
 839         tristate "ACPI firmware driver for PATA"
 840         depends on ATA_ACPI && ATA_BMDMA
 841         help
 842           This option enables an ACPI method driver which drives
 843           motherboard PATA controller interfaces through the ACPI
 844           firmware in the BIOS. This driver can sometimes handle
 845           otherwise unsupported hardware.
 846
 847 config ATA_GENERIC
 848         tristate "Generic ATA support"
 849         depends on PCI && ATA_BMDMA
 850         help
 851           This option enables support for generic BIOS configured
 852           ATA controllers via the new ATA layer
 853
 854           If unsure, say N.
 855
 856 config PATA_LEGACY
 857         tristate "Legacy ISA PATA support (Experimental)"
 858         depends on (ISA || PCI) && EXPERIMENTAL
 859         help
 860           This option enables support for ISA/VLB/PCI bus legacy PATA
 861           ports and allows them to be accessed via the new ATA layer.
 862
 863           If unsure, say N.
 864
 865 endif # ATA_SFF
 866 endif # ATA