drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 if HAS_DMA
  84
  85 comment "Controllers with non-SFF native interface"
  86
  87 config SATA_AHCI
  88         tristate "AHCI SATA support"
  89         depends on PCI
  90         help
  91           This option enables support for AHCI Serial ATA.
  92
  93           If unsure, say N.
  94
  95 config SATA_AHCI_PLATFORM
  96         tristate "Platform AHCI SATA support"
  97         help
  98           This option enables support for Platform AHCI Serial ATA
  99           controllers.
 100
 101           If unsure, say N.
 102
 103 config AHCI_BRCM
 104         tristate "Broadcom AHCI SATA support"
 105         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
 106         help
 107           This option enables support for the AHCI SATA3 controller found on
 108           Broadcom SoC's.
 109
 110           If unsure, say N.
 111
 112 config AHCI_DA850
 113         tristate "DaVinci DA850 AHCI SATA support"
 114         depends on ARCH_DAVINCI_DA850
 115         help
 116           This option enables support for the DaVinci DA850 SoC's
 117           onboard AHCI SATA.
 118
 119           If unsure, say N.
 120
 121 config AHCI_ST
 122         tristate "ST AHCI SATA support"
 123         depends on ARCH_STI
 124         help
 125           This option enables support for ST AHCI SATA controller.
 126
 127           If unsure, say N.
 128
 129 config AHCI_IMX
 130         tristate "Freescale i.MX AHCI SATA support"
 131         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 132         depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 133         help
 134           This option enables support for the Freescale i.MX SoC's
 135           onboard AHCI SATA.
 136
 137           If unsure, say N.
 138
 139 config AHCI_CEVA
 140         tristate "CEVA AHCI SATA support"
 141         depends on OF
 142         help
 143           This option enables support for the CEVA AHCI SATA.
 144           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 145
 146           If unsure, say N.
 147
 148 config AHCI_MVEBU
 149         tristate "Marvell EBU AHCI SATA support"
 150         depends on ARCH_MVEBU
 151         help
 152           This option enables support for the Marvebu EBU SoC's
 153           onboard AHCI SATA.
 154
 155           If unsure, say N.
 156
 157 config AHCI_OCTEON
 158         tristate "Cavium Octeon Soc Serial ATA"
 159         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 160         default y
 161         help
 162           This option enables support for Cavium Octeon SoC Serial ATA.
 163
 164           If unsure, say N.
 165
 166 config AHCI_SUNXI
 167         tristate "Allwinner sunxi AHCI SATA support"
 168         depends on ARCH_SUNXI
 169         help
 170           This option enables support for the Allwinner sunxi SoC's
 171           onboard AHCI SATA.
 172
 173           If unsure, say N.
 174
 175 config AHCI_TEGRA
 176         tristate "NVIDIA Tegra124 AHCI SATA support"
 177         depends on ARCH_TEGRA
 178         help
 179           This option enables support for the NVIDIA Tegra124 SoC's
 180           onboard AHCI SATA.
 181
 182           If unsure, say N.
 183
 184 config AHCI_XGENE
 185         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 186         depends on PHY_XGENE
 187         help
 188          This option enables support for APM X-Gene SoC SATA host controller.
 189
 190 config AHCI_QORIQ
 191         tristate "Freescale QorIQ AHCI SATA support"
 192         depends on OF
 193         help
 194           This option enables support for the Freescale QorIQ AHCI SoC's
 195           onboard AHCI SATA.
 196
 197           If unsure, say N.
 198
 199 config SATA_FSL
 200         tristate "Freescale 3.0Gbps SATA support"
 201         depends on FSL_SOC
 202         help
 203           This option enables support for Freescale 3.0Gbps SATA controller.
 204           It can be found on MPC837x and MPC8315.
 205
 206           If unsure, say N.
 207
 208 config SATA_AHCI_SEATTLE
 209         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 210         depends on ARCH_SEATTLE
 211         help
 212          This option enables support for AMD Seattle SATA host controller.
 213
 214          If unsure, say N
 215
 216 config SATA_INIC162X
 217         tristate "Initio 162x SATA support (Very Experimental)"
 218         depends on PCI
 219         help
 220           This option enables support for Initio 162x Serial ATA.
 221
 222 config SATA_ACARD_AHCI
 223         tristate "ACard AHCI variant (ATP 8620)"
 224         depends on PCI
 225         help
 226           This option enables support for Acard.
 227
 228           If unsure, say N.
 229
 230 config SATA_SIL24
 231         tristate "Silicon Image 3124/3132 SATA support"
 232         depends on PCI
 233         help
 234           This option enables support for Silicon Image 3124/3132 Serial ATA.
 235
 236           If unsure, say N.
 237
 238 endif # HAS_DMA
 239
 240 config ATA_SFF
 241         bool "ATA SFF support (for legacy IDE and PATA)"
 242         default y
 243         help
 244           This option adds support for ATA controllers with SFF
 245           compliant or similar programming interface.
 246
 247           SFF is the legacy IDE interface that has been around since
 248           the dawn of time.  Almost all PATA controllers have an
 249           SFF interface.  Many SATA controllers have an SFF interface
 250           when configured into a legacy compatibility mode.
 251
 252           For users with exclusively modern controllers like AHCI,
 253           Silicon Image 3124, or Marvell 6440, you may choose to
 254           disable this unneeded SFF support.
 255
 256           If unsure, say Y.
 257
 258 if ATA_SFF
 259
 260 comment "SFF controllers with custom DMA interface"
 261
 262 config PDC_ADMA
 263         tristate "Pacific Digital ADMA support"
 264         depends on PCI
 265         help
 266           This option enables support for Pacific Digital ADMA controllers
 267
 268           If unsure, say N.
 269
 270 config PATA_OCTEON_CF
 271         tristate "OCTEON Boot Bus Compact Flash support"
 272         depends on CAVIUM_OCTEON_SOC
 273         help
 274           This option enables a polled compact flash driver for use with
 275           compact flash cards attached to the OCTEON boot bus.
 276
 277           If unsure, say N.
 278
 279 config SATA_QSTOR
 280         tristate "Pacific Digital SATA QStor support"
 281         depends on PCI
 282         help
 283           This option enables support for Pacific Digital Serial ATA QStor.
 284
 285           If unsure, say N.
 286
 287 config SATA_SX4
 288         tristate "Promise SATA SX4 support (Experimental)"
 289         depends on PCI
 290         help
 291           This option enables support for Promise Serial ATA SX4.
 292
 293           If unsure, say N.
 294
 295 config ATA_BMDMA
 296         bool "ATA BMDMA support"
 297         depends on HAS_DMA
 298         default y
 299         help
 300           This option adds support for SFF ATA controllers with BMDMA
 301           capability.  BMDMA stands for bus-master DMA and is the
 302           de facto DMA interface for SFF controllers.
 303
 304           If unsure, say Y.
 305
 306 if ATA_BMDMA
 307
 308 comment "SATA SFF controllers with BMDMA"
 309
 310 config ATA_PIIX
 311         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 312         depends on PCI
 313         help
 314           This option enables support for ICH5/6/7/8 Serial ATA
 315           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 316           host controllers.
 317
 318           If unsure, say N.
 319
 320 config SATA_DWC
 321         tristate "DesignWare Cores SATA support"
 322         depends on DMADEVICES
 323         select GENERIC_PHY
 324         help
 325           This option enables support for the on-chip SATA controller of the
 326           AppliedMicro processor 460EX.
 327
 328           If unsure, say N.
 329
 330 config SATA_DWC_OLD_DMA
 331         bool "Support old device trees"
 332         depends on SATA_DWC
 333         select DW_DMAC_CORE
 334         default y if 460EX
 335         help
 336           This option enables support for old device trees without the
 337           "dmas" property.
 338
 339 config SATA_DWC_DEBUG
 340         bool "Debugging driver version"
 341         depends on SATA_DWC
 342         help
 343           This option enables debugging output in the driver.
 344
 345 config SATA_DWC_VDEBUG
 346         bool "Verbose debug output"
 347         depends on SATA_DWC_DEBUG
 348         help
 349           This option enables the taskfile dumping and NCQ debugging.
 350
 351 config SATA_HIGHBANK
 352         tristate "Calxeda Highbank SATA support"
 353         depends on HAS_DMA
 354         depends on ARCH_HIGHBANK || COMPILE_TEST
 355         help
 356           This option enables support for the Calxeda Highbank SoC's
 357           onboard SATA.
 358
 359           If unsure, say N.
 360
 361 config SATA_MV
 362         tristate "Marvell SATA support"
 363         depends on HAS_DMA
 364         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 365                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 366         select GENERIC_PHY
 367         help
 368           This option enables support for the Marvell Serial ATA family.
 369           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 370           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 371
 372           If unsure, say N.
 373
 374 config SATA_NV
 375         tristate "NVIDIA SATA support"
 376         depends on PCI
 377         help
 378           This option enables support for NVIDIA Serial ATA.
 379
 380           If unsure, say N.
 381
 382 config SATA_PROMISE
 383         tristate "Promise SATA TX2/TX4 support"
 384         depends on PCI
 385         help
 386           This option enables support for Promise Serial ATA TX2/TX4.
 387
 388           If unsure, say N.
 389
 390 config SATA_RCAR
 391         tristate "Renesas R-Car SATA support"
 392         depends on ARCH_RENESAS || COMPILE_TEST
 393         help
 394           This option enables support for Renesas R-Car Serial ATA.
 395
 396           If unsure, say N.
 397
 398 config SATA_SIL
 399         tristate "Silicon Image SATA support"
 400         depends on PCI
 401         help
 402           This option enables support for Silicon Image Serial ATA.
 403
 404           If unsure, say N.
 405
 406 config SATA_SIS
 407         tristate "SiS 964/965/966/180 SATA support"
 408         depends on PCI
 409         select PATA_SIS
 410         help
 411           This option enables support for SiS Serial ATA on
 412           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 413           The PATA support for SiS 180 requires additionally to
 414           enable the PATA_SIS driver in the config.
 415           If unsure, say N.
 416
 417 config SATA_SVW
 418         tristate "ServerWorks Frodo / Apple K2 SATA support"
 419         depends on PCI
 420         help
 421           This option enables support for Broadcom/Serverworks/Apple K2
 422           SATA support.
 423
 424           If unsure, say N.
 425
 426 config SATA_ULI
 427         tristate "ULi Electronics SATA support"
 428         depends on PCI
 429         help
 430           This option enables support for ULi Electronics SATA.
 431
 432           If unsure, say N.
 433
 434 config SATA_VIA
 435         tristate "VIA SATA support"
 436         depends on PCI
 437         help
 438           This option enables support for VIA Serial ATA.
 439
 440           If unsure, say N.
 441
 442 config SATA_VITESSE
 443         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 444         depends on PCI
 445         help
 446           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 447
 448           If unsure, say N.
 449
 450 comment "PATA SFF controllers with BMDMA"
 451
 452 config PATA_ALI
 453         tristate "ALi PATA support"
 454         depends on PCI
 455         help
 456           This option enables support for the ALi ATA interfaces
 457           found on the many ALi chipsets.
 458
 459           If unsure, say N.
 460
 461 config PATA_AMD
 462         tristate "AMD/NVidia PATA support"
 463         depends on PCI
 464         help
 465           This option enables support for the AMD and NVidia PATA
 466           interfaces found on the chipsets for Athlon/Athlon64.
 467
 468           If unsure, say N.
 469
 470 config PATA_ARASAN_CF
 471         tristate "ARASAN CompactFlash PATA Controller Support"
 472         depends on ARCH_SPEAR13XX || COMPILE_TEST
 473         depends on DMADEVICES
 474         select DMA_ENGINE
 475         help
 476           Say Y here to support the ARASAN CompactFlash PATA controller
 477
 478 config PATA_ARTOP
 479         tristate "ARTOP 6210/6260 PATA support"
 480         depends on PCI
 481         help
 482           This option enables support for ARTOP PATA controllers.
 483
 484           If unsure, say N.
 485
 486 config PATA_ATIIXP
 487         tristate "ATI PATA support"
 488         depends on PCI
 489         help
 490           This option enables support for the ATI ATA interfaces
 491           found on the many ATI chipsets.
 492
 493           If unsure, say N.
 494
 495 config PATA_ATP867X
 496         tristate "ARTOP/Acard ATP867X PATA support"
 497         depends on PCI
 498         help
 499           This option enables support for ARTOP/Acard ATP867X PATA
 500           controllers.
 501
 502           If unsure, say N.
 503
 504 config PATA_BF54X
 505         tristate "Blackfin 54x ATAPI support"
 506         depends on BF542 || BF548 || BF549
 507         help
 508           This option enables support for the built-in ATAPI controller on
 509           Blackfin 54x family chips.
 510
 511           If unsure, say N.
 512
 513 config PATA_CMD64X
 514         tristate "CMD64x PATA support"
 515         depends on PCI
 516         help
 517           This option enables support for the CMD64x series chips
 518           except for the CMD640.
 519
 520           If unsure, say N.
 521
 522 config PATA_CS5520
 523         tristate "CS5510/5520 PATA support"
 524         depends on PCI && (X86_32 || COMPILE_TEST)
 525         help
 526           This option enables support for the Cyrix 5510/5520
 527           companion chip used with the MediaGX/Geode processor family.
 528
 529           If unsure, say N.
 530
 531 config PATA_CS5530
 532         tristate "CS5530 PATA support"
 533         depends on PCI && (X86_32 || COMPILE_TEST)
 534         help
 535           This option enables support for the Cyrix/NatSemi/AMD CS5530
 536           companion chip used with the MediaGX/Geode processor family.
 537
 538           If unsure, say N.
 539
 540 config PATA_CS5535
 541         tristate "CS5535 PATA support (Experimental)"
 542         depends on PCI && X86_32
 543         help
 544           This option enables support for the NatSemi/AMD CS5535
 545           companion chip used with the Geode processor family.
 546
 547           If unsure, say N.
 548
 549 config PATA_CS5536
 550         tristate "CS5536 PATA support"
 551         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 552         help
 553           This option enables support for the AMD CS5536
 554           companion chip used with the Geode LX processor family.
 555
 556           If unsure, say N.
 557
 558 config PATA_CYPRESS
 559         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 560         depends on PCI
 561         help
 562           This option enables support for the Cypress/Contaq CY82C693
 563           chipset found in some Alpha systems
 564
 565           If unsure, say N.
 566
 567 config PATA_EFAR
 568         tristate "EFAR SLC90E66 support"
 569         depends on PCI
 570         help
 571           This option enables support for the EFAR SLC90E66
 572           IDE controller found on some older machines.
 573
 574           If unsure, say N.
 575
 576 config PATA_EP93XX
 577         tristate "Cirrus Logic EP93xx PATA support"
 578         depends on ARCH_EP93XX
 579         help
 580           This option enables support for the PATA controller in
 581           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 582
 583           If unsure, say N.
 584
 585 config PATA_HPT366
 586         tristate "HPT 366/368 PATA support"
 587         depends on PCI
 588         help
 589           This option enables support for the HPT 366 and 368
 590           PATA controllers via the new ATA layer.
 591
 592           If unsure, say N.
 593
 594 config PATA_HPT37X
 595         tristate "HPT 370/370A/371/372/374/302 PATA support"
 596         depends on PCI
 597         help
 598           This option enables support for the majority of the later HPT
 599           PATA controllers via the new ATA layer.
 600
 601           If unsure, say N.
 602
 603 config PATA_HPT3X2N
 604         tristate "HPT 371N/372N/302N PATA support"
 605         depends on PCI
 606         help
 607           This option enables support for the N variant HPT PATA
 608           controllers via the new ATA layer.
 609
 610           If unsure, say N.
 611
 612 config PATA_HPT3X3
 613         tristate "HPT 343/363 PATA support"
 614         depends on PCI
 615         help
 616           This option enables support for the HPT 343/363
 617           PATA controllers via the new ATA layer
 618
 619           If unsure, say N.
 620
 621 config PATA_HPT3X3_DMA
 622         bool "HPT 343/363 DMA support"
 623         depends on PATA_HPT3X3
 624         help
 625           This option enables DMA support for the HPT343/363
 626           controllers. Enable with care as there are still some
 627           problems with DMA on this chipset.
 628
 629 config PATA_ICSIDE
 630         tristate "Acorn ICS PATA support"
 631         depends on ARM && ARCH_ACORN
 632         help
 633           On Acorn systems, say Y here if you wish to use the ICS PATA
 634           interface card.  This is not required for ICS partition support.
 635           If you are unsure, say N to this.
 636
 637 config PATA_IMX
 638         tristate "PATA support for Freescale iMX"
 639         depends on ARCH_MXC
 640         help
 641           This option enables support for the PATA host available on Freescale
 642           iMX SoCs.
 643
 644           If unsure, say N.
 645
 646 config PATA_IT8213
 647         tristate "IT8213 PATA support (Experimental)"
 648         depends on PCI
 649         help
 650           This option enables support for the ITE 821 PATA
 651           controllers via the new ATA layer.
 652
 653           If unsure, say N.
 654
 655 config PATA_IT821X
 656         tristate "IT8211/2 PATA support"
 657         depends on PCI
 658         help
 659           This option enables support for the ITE 8211 and 8212
 660           PATA controllers via the new ATA layer, including RAID
 661           mode.
 662
 663           If unsure, say N.
 664
 665 config PATA_JMICRON
 666         tristate "JMicron PATA support"
 667         depends on PCI
 668         help
 669           Enable support for the JMicron IDE controller, via the new
 670           ATA layer.
 671
 672           If unsure, say N.
 673
 674 config PATA_MACIO
 675         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 676         depends on PPC_PMAC
 677         help
 678           Most IDE capable PowerMacs have IDE busses driven by a variant
 679           of this controller which is part of the Apple chipset used on
 680           most PowerMac models. Some models have multiple busses using
 681           different chipsets, though generally, MacIO is one of them.
 682
 683 config PATA_MARVELL
 684         tristate "Marvell PATA support via legacy mode"
 685         depends on PCI
 686         help
 687           This option enables limited support for the Marvell 88SE61xx ATA
 688           controllers. If you wish to use only the SATA ports then select
 689           the AHCI driver alone. If you wish to the use the PATA port or
 690           both SATA and PATA include this driver.
 691
 692           If unsure, say N.
 693
 694 config PATA_MPC52xx
 695         tristate "Freescale MPC52xx SoC internal IDE"
 696         depends on PPC_MPC52xx && PPC_BESTCOMM
 697         select PPC_BESTCOMM_ATA
 698         help
 699           This option enables support for integrated IDE controller
 700           of the Freescale MPC52xx SoC.
 701
 702           If unsure, say N.
 703
 704 config PATA_NETCELL
 705         tristate "NETCELL Revolution RAID support"
 706         depends on PCI
 707         help
 708           This option enables support for the Netcell Revolution RAID
 709           PATA controller.
 710
 711           If unsure, say N.
 712
 713 config PATA_NINJA32
 714         tristate "Ninja32/Delkin Cardbus ATA support"
 715         depends on PCI
 716         help
 717           This option enables support for the Ninja32, Delkin and
 718           possibly other brands of Cardbus ATA adapter
 719
 720           If unsure, say N.
 721
 722 config PATA_NS87415
 723         tristate "Nat Semi NS87415 PATA support"
 724         depends on PCI
 725         help
 726           This option enables support for the National Semiconductor
 727           NS87415 PCI-IDE controller.
 728
 729           If unsure, say N.
 730
 731 config PATA_OLDPIIX
 732         tristate "Intel PATA old PIIX support"
 733         depends on PCI
 734         help
 735           This option enables support for early PIIX PATA support.
 736
 737           If unsure, say N.
 738
 739 config PATA_OPTIDMA
 740         tristate "OPTI FireStar PATA support (Very Experimental)"
 741         depends on PCI
 742         help
 743           This option enables DMA/PIO support for the later OPTi
 744           controllers found on some old motherboards and in some
 745           laptops.
 746
 747           If unsure, say N.
 748
 749 config PATA_PDC2027X
 750         tristate "Promise PATA 2027x support"
 751         depends on PCI
 752         help
 753           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 754
 755           If unsure, say N.
 756
 757 config PATA_PDC_OLD
 758         tristate "Older Promise PATA controller support"
 759         depends on PCI
 760         help
 761           This option enables support for the Promise 20246, 20262, 20263,
 762           20265 and 20267 adapters.
 763
 764           If unsure, say N.
 765
 766 config PATA_RADISYS
 767         tristate "RADISYS 82600 PATA support (Experimental)"
 768         depends on PCI
 769         help
 770           This option enables support for the RADISYS 82600
 771           PATA controllers via the new ATA layer
 772
 773           If unsure, say N.
 774
 775 config PATA_RDC
 776         tristate "RDC PATA support"
 777         depends on PCI
 778         help
 779           This option enables basic support for the later RDC PATA controllers
 780           controllers via the new ATA layer. For the RDC 1010, you need to
 781           enable the IT821X driver instead.
 782
 783           If unsure, say N.
 784
 785 config PATA_SC1200
 786         tristate "SC1200 PATA support"
 787         depends on PCI && (X86_32 || COMPILE_TEST)
 788         help
 789           This option enables support for the NatSemi/AMD SC1200 SoC
 790           companion chip used with the Geode processor family.
 791
 792           If unsure, say N.
 793
 794 config PATA_SCH
 795         tristate "Intel SCH PATA support"
 796         depends on PCI
 797         help
 798           This option enables support for Intel SCH PATA on the Intel
 799           SCH (US15W, US15L, UL11L) series host controllers.
 800
 801           If unsure, say N.
 802
 803 config PATA_SERVERWORKS
 804         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 805         depends on PCI
 806         help
 807           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 808           HT1000 PATA controllers, via the new ATA layer.
 809
 810           If unsure, say N.
 811
 812 config PATA_SIL680
 813         tristate "CMD / Silicon Image 680 PATA support"
 814         depends on PCI
 815         help
 816           This option enables support for CMD / Silicon Image 680 PATA.
 817
 818           If unsure, say N.
 819
 820 config PATA_SIS
 821         tristate "SiS PATA support"
 822         depends on PCI
 823         help
 824           This option enables support for SiS PATA controllers
 825
 826           If unsure, say N.
 827
 828 config PATA_TOSHIBA
 829         tristate "Toshiba Piccolo support (Experimental)"
 830         depends on PCI
 831         help
 832           Support for the Toshiba Piccolo controllers. Currently only the
 833           primary channel is supported by this driver.
 834
 835           If unsure, say N.
 836
 837 config PATA_TRIFLEX
 838         tristate "Compaq Triflex PATA support"
 839         depends on PCI
 840         help
 841           Enable support for the Compaq 'Triflex' IDE controller as found
 842           on many Compaq Pentium-Pro systems, via the new ATA layer.
 843
 844           If unsure, say N.
 845
 846 config PATA_VIA
 847         tristate "VIA PATA support"
 848         depends on PCI
 849         help
 850           This option enables support for the VIA PATA interfaces
 851           found on the many VIA chipsets.
 852
 853           If unsure, say N.
 854
 855 config PATA_PXA
 856         tristate "PXA DMA-capable PATA support"
 857         depends on ARCH_PXA
 858         help
 859           This option enables support for harddrive attached to PXA CPU's bus.
 860
 861           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 862                 is not capable of doing MWDMA, use pata_platform instead.
 863
 864           If unsure, say N.
 865
 866 config PATA_WINBOND
 867         tristate "Winbond SL82C105 PATA support"
 868         depends on PCI
 869         help
 870           This option enables support for SL82C105 PATA devices found in the
 871           Netwinder and some other systems
 872
 873           If unsure, say N.
 874
 875 endif # ATA_BMDMA
 876
 877 comment "PIO-only SFF controllers"
 878
 879 config PATA_AT32
 880         tristate "Atmel AVR32 PATA support (Experimental)"
 881         depends on AVR32 && PLATFORM_AT32AP
 882         help
 883           This option enables support for the IDE devices on the
 884           Atmel AT32AP platform.
 885
 886           If unsure, say N.
 887
 888 config PATA_AT91
 889         tristate "PATA support for AT91SAM9260"
 890         depends on ARM && SOC_AT91SAM9
 891         help
 892           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 893
 894           If unsure, say N.
 895
 896 config PATA_CMD640_PCI
 897         tristate "CMD640 PCI PATA support (Experimental)"
 898         depends on PCI
 899         help
 900           This option enables support for the CMD640 PCI IDE
 901           interface chip. Only the primary channel is currently
 902           supported.
 903
 904           If unsure, say N.
 905
 906 config PATA_FALCON
 907         tristate "Atari Falcon PATA support"
 908         depends on M68K && ATARI
 909         help
 910           This option enables support for the on-board IDE
 911           interface on the Atari Falcon.
 912
 913           If unsure, say N.
 914
 915 config PATA_ISAPNP
 916         tristate "ISA Plug and Play PATA support"
 917         depends on ISAPNP
 918         help
 919           This option enables support for ISA plug & play ATA
 920           controllers such as those found on old soundcards.
 921
 922           If unsure, say N.
 923
 924 config PATA_IXP4XX_CF
 925         tristate "IXP4XX Compact Flash support"
 926         depends on ARCH_IXP4XX
 927         help
 928           This option enables support for a Compact Flash connected on
 929           the ixp4xx expansion bus. This driver had been written for
 930           Loft/Avila boards in mind but can work with others.
 931
 932           If unsure, say N.
 933
 934 config PATA_MPIIX
 935         tristate "Intel PATA MPIIX support"
 936         depends on PCI
 937         help
 938           This option enables support for MPIIX PATA support.
 939
 940           If unsure, say N.
 941
 942 config PATA_NS87410
 943         tristate "Nat Semi NS87410 PATA support"
 944         depends on PCI
 945         help
 946           This option enables support for the National Semiconductor
 947           NS87410 PCI-IDE controller.
 948
 949           If unsure, say N.
 950
 951 config PATA_OPTI
 952         tristate "OPTI621/6215 PATA support (Very Experimental)"
 953         depends on PCI
 954         help
 955           This option enables full PIO support for the early Opti ATA
 956           controllers found on some old motherboards.
 957
 958           If unsure, say N.
 959
 960 config PATA_PALMLD
 961         tristate "Palm LifeDrive PATA support"
 962         depends on MACH_PALMLD
 963         help
 964           This option enables support for Palm LifeDrive's internal ATA
 965           port via the new ATA layer.
 966
 967           If unsure, say N.
 968
 969 config PATA_PCMCIA
 970         tristate "PCMCIA PATA support"
 971         depends on PCMCIA
 972         help
 973           This option enables support for PCMCIA ATA interfaces, including
 974           compact flash card adapters via the new ATA layer.
 975
 976           If unsure, say N.
 977
 978 config PATA_PLATFORM
 979         tristate "Generic platform device PATA support"
 980         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 981         help
 982           This option enables support for generic directly connected ATA
 983           devices commonly found on embedded systems.
 984
 985           If unsure, say N.
 986
 987 config PATA_OF_PLATFORM
 988         tristate "OpenFirmware platform device PATA support"
 989         depends on PATA_PLATFORM && OF
 990         help
 991           This option enables support for generic directly connected ATA
 992           devices commonly found on embedded systems with OpenFirmware
 993           bindings.
 994
 995           If unsure, say N.
 996
 997 config PATA_QDI
 998         tristate "QDI VLB PATA support"
 999         depends on ISA
1000         select PATA_LEGACY
1001         help
1002           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1003
1004 config PATA_RB532
1005         tristate "RouterBoard 532 PATA CompactFlash support"
1006         depends on MIKROTIK_RB532
1007         help
1008           This option enables support for the RouterBoard 532
1009           PATA CompactFlash controller.
1010
1011           If unsure, say N.
1012
1013 config PATA_RZ1000
1014         tristate "PC Tech RZ1000 PATA support"
1015         depends on PCI
1016         help
1017           This option enables basic support for the PC Tech RZ1000/1
1018           PATA controllers via the new ATA layer
1019
1020           If unsure, say N.
1021
1022 config PATA_SAMSUNG_CF
1023         tristate "Samsung SoC PATA support"
1024         depends on SAMSUNG_DEV_IDE
1025         help
1026           This option enables basic support for Samsung's S3C/S5P board
1027           PATA controllers via the new ATA layer
1028
1029           If unsure, say N.
1030
1031 config PATA_WINBOND_VLB
1032         tristate "Winbond W83759A VLB PATA support (Experimental)"
1033         depends on ISA
1034         select PATA_LEGACY
1035         help
1036           Support for the Winbond W83759A controller on Vesa Local Bus
1037           systems.
1038
1039 comment "Generic fallback / legacy drivers"
1040
1041 config PATA_ACPI
1042         tristate "ACPI firmware driver for PATA"
1043         depends on ATA_ACPI && ATA_BMDMA
1044         help
1045           This option enables an ACPI method driver which drives
1046           motherboard PATA controller interfaces through the ACPI
1047           firmware in the BIOS. This driver can sometimes handle
1048           otherwise unsupported hardware.
1049
1050 config ATA_GENERIC
1051         tristate "Generic ATA support"
1052         depends on PCI && ATA_BMDMA
1053         help
1054           This option enables support for generic BIOS configured
1055           ATA controllers via the new ATA layer
1056
1057           If unsure, say N.
1058
1059 config PATA_LEGACY
1060         tristate "Legacy ISA PATA support (Experimental)"
1061         depends on (ISA || PCI)
1062         help
1063           This option enables support for ISA/VLB/PCI bus legacy PATA
1064           ports and allows them to be accessed via the new ATA layer.
1065
1066           If unsure, say N.
1067
1068 endif # ATA_SFF
1069 endif # ATA