drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI && PCI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_DA850
 102         tristate "DaVinci DA850 AHCI SATA support"
 103         depends on ARCH_DAVINCI_DA850
 104         help
 105           This option enables support for the DaVinci DA850 SoC's
 106           onboard AHCI SATA.
 107
 108           If unsure, say N.
 109
 110 config AHCI_ST
 111         tristate "ST AHCI SATA support"
 112         depends on ARCH_STI
 113         help
 114           This option enables support for ST AHCI SATA controller.
 115
 116           If unsure, say N.
 117
 118 config AHCI_IMX
 119         tristate "Freescale i.MX AHCI SATA support"
 120         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 121         help
 122           This option enables support for the Freescale i.MX SoC's
 123           onboard AHCI SATA.
 124
 125           If unsure, say N.
 126
 127 config AHCI_MVEBU
 128         tristate "Marvell EBU AHCI SATA support"
 129         depends on ARCH_MVEBU
 130         help
 131           This option enables support for the Marvebu EBU SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_SUNXI
 137         tristate "Allwinner sunxi AHCI SATA support"
 138         depends on ARCH_SUNXI
 139         help
 140           This option enables support for the Allwinner sunxi SoC's
 141           onboard AHCI SATA.
 142
 143           If unsure, say N.
 144
 145 config AHCI_TEGRA
 146         tristate "NVIDIA Tegra124 AHCI SATA support"
 147         depends on ARCH_TEGRA
 148         help
 149           This option enables support for the NVIDIA Tegra124 SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_XGENE
 155         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 156         depends on PHY_XGENE
 157         help
 158          This option enables support for APM X-Gene SoC SATA host controller.
 159
 160 config SATA_FSL
 161         tristate "Freescale 3.0Gbps SATA support"
 162         depends on FSL_SOC
 163         help
 164           This option enables support for Freescale 3.0Gbps SATA controller.
 165           It can be found on MPC837x and MPC8315.
 166
 167           If unsure, say N.
 168
 169 config SATA_INIC162X
 170         tristate "Initio 162x SATA support (Very Experimental)"
 171         depends on PCI
 172         help
 173           This option enables support for Initio 162x Serial ATA.
 174
 175 config SATA_ACARD_AHCI
 176         tristate "ACard AHCI variant (ATP 8620)"
 177         depends on PCI
 178         help
 179           This option enables support for Acard.
 180
 181           If unsure, say N.
 182
 183 config SATA_SIL24
 184         tristate "Silicon Image 3124/3132 SATA support"
 185         depends on PCI
 186         help
 187           This option enables support for Silicon Image 3124/3132 Serial ATA.
 188
 189           If unsure, say N.
 190
 191 config ATA_SFF
 192         bool "ATA SFF support (for legacy IDE and PATA)"
 193         default y
 194         help
 195           This option adds support for ATA controllers with SFF
 196           compliant or similar programming interface.
 197
 198           SFF is the legacy IDE interface that has been around since
 199           the dawn of time.  Almost all PATA controllers have an
 200           SFF interface.  Many SATA controllers have an SFF interface
 201           when configured into a legacy compatibility mode.
 202
 203           For users with exclusively modern controllers like AHCI,
 204           Silicon Image 3124, or Marvell 6440, you may choose to
 205           disable this unneeded SFF support.
 206
 207           If unsure, say Y.
 208
 209 if ATA_SFF
 210
 211 comment "SFF controllers with custom DMA interface"
 212
 213 config PDC_ADMA
 214         tristate "Pacific Digital ADMA support"
 215         depends on PCI
 216         help
 217           This option enables support for Pacific Digital ADMA controllers
 218
 219           If unsure, say N.
 220
 221 config PATA_OCTEON_CF
 222         tristate "OCTEON Boot Bus Compact Flash support"
 223         depends on CAVIUM_OCTEON_SOC
 224         help
 225           This option enables a polled compact flash driver for use with
 226           compact flash cards attached to the OCTEON boot bus.
 227
 228           If unsure, say N.
 229
 230 config SATA_QSTOR
 231         tristate "Pacific Digital SATA QStor support"
 232         depends on PCI
 233         help
 234           This option enables support for Pacific Digital Serial ATA QStor.
 235
 236           If unsure, say N.
 237
 238 config SATA_SX4
 239         tristate "Promise SATA SX4 support (Experimental)"
 240         depends on PCI
 241         help
 242           This option enables support for Promise Serial ATA SX4.
 243
 244           If unsure, say N.
 245
 246 config ATA_BMDMA
 247         bool "ATA BMDMA support"
 248         default y
 249         help
 250           This option adds support for SFF ATA controllers with BMDMA
 251           capability.  BMDMA stands for bus-master DMA and is the
 252           de facto DMA interface for SFF controllers.
 253
 254           If unsure, say Y.
 255
 256 if ATA_BMDMA
 257
 258 comment "SATA SFF controllers with BMDMA"
 259
 260 config ATA_PIIX
 261         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 262         depends on PCI
 263         help
 264           This option enables support for ICH5/6/7/8 Serial ATA
 265           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 266           host controllers.
 267
 268           If unsure, say N.
 269
 270 config SATA_DWC
 271         tristate "DesignWare Cores SATA support"
 272         depends on 460EX
 273         help
 274           This option enables support for the on-chip SATA controller of the
 275           AppliedMicro processor 460EX.
 276
 277           If unsure, say N.
 278
 279 config SATA_DWC_DEBUG
 280         bool "Debugging driver version"
 281         depends on SATA_DWC
 282         help
 283           This option enables debugging output in the driver.
 284
 285 config SATA_DWC_VDEBUG
 286         bool "Verbose debug output"
 287         depends on SATA_DWC_DEBUG
 288         help
 289           This option enables the taskfile dumping and NCQ debugging.
 290
 291 config SATA_HIGHBANK
 292         tristate "Calxeda Highbank SATA support"
 293         depends on ARCH_HIGHBANK || COMPILE_TEST
 294         help
 295           This option enables support for the Calxeda Highbank SoC's
 296           onboard SATA.
 297
 298           If unsure, say N.
 299
 300 config SATA_MV
 301         tristate "Marvell SATA support"
 302         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 303                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 304         select GENERIC_PHY
 305         help
 306           This option enables support for the Marvell Serial ATA family.
 307           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 308           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 309
 310           If unsure, say N.
 311
 312 config SATA_NV
 313         tristate "NVIDIA SATA support"
 314         depends on PCI
 315         help
 316           This option enables support for NVIDIA Serial ATA.
 317
 318           If unsure, say N.
 319
 320 config SATA_PROMISE
 321         tristate "Promise SATA TX2/TX4 support"
 322         depends on PCI
 323         help
 324           This option enables support for Promise Serial ATA TX2/TX4.
 325
 326           If unsure, say N.
 327
 328 config SATA_RCAR
 329         tristate "Renesas R-Car SATA support"
 330         depends on ARCH_SHMOBILE || COMPILE_TEST
 331         help
 332           This option enables support for Renesas R-Car Serial ATA.
 333
 334           If unsure, say N.
 335
 336 config SATA_SIL
 337         tristate "Silicon Image SATA support"
 338         depends on PCI
 339         help
 340           This option enables support for Silicon Image Serial ATA.
 341
 342           If unsure, say N.
 343
 344 config SATA_SIS
 345         tristate "SiS 964/965/966/180 SATA support"
 346         depends on PCI
 347         select PATA_SIS
 348         help
 349           This option enables support for SiS Serial ATA on
 350           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 351           The PATA support for SiS 180 requires additionally to
 352           enable the PATA_SIS driver in the config.
 353           If unsure, say N.
 354
 355 config SATA_SVW
 356         tristate "ServerWorks Frodo / Apple K2 SATA support"
 357         depends on PCI
 358         help
 359           This option enables support for Broadcom/Serverworks/Apple K2
 360           SATA support.
 361
 362           If unsure, say N.
 363
 364 config SATA_ULI
 365         tristate "ULi Electronics SATA support"
 366         depends on PCI
 367         help
 368           This option enables support for ULi Electronics SATA.
 369
 370           If unsure, say N.
 371
 372 config SATA_VIA
 373         tristate "VIA SATA support"
 374         depends on PCI
 375         help
 376           This option enables support for VIA Serial ATA.
 377
 378           If unsure, say N.
 379
 380 config SATA_VITESSE
 381         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 382         depends on PCI
 383         help
 384           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 385
 386           If unsure, say N.
 387
 388 comment "PATA SFF controllers with BMDMA"
 389
 390 config PATA_ALI
 391         tristate "ALi PATA support"
 392         depends on PCI
 393         help
 394           This option enables support for the ALi ATA interfaces
 395           found on the many ALi chipsets.
 396
 397           If unsure, say N.
 398
 399 config PATA_AMD
 400         tristate "AMD/NVidia PATA support"
 401         depends on PCI
 402         help
 403           This option enables support for the AMD and NVidia PATA
 404           interfaces found on the chipsets for Athlon/Athlon64.
 405
 406           If unsure, say N.
 407
 408 config PATA_ARASAN_CF
 409         tristate "ARASAN CompactFlash PATA Controller Support"
 410         depends on ARCH_SPEAR13XX || COMPILE_TEST
 411         depends on DMADEVICES
 412         select DMA_ENGINE
 413         help
 414           Say Y here to support the ARASAN CompactFlash PATA controller
 415
 416 config PATA_ARTOP
 417         tristate "ARTOP 6210/6260 PATA support"
 418         depends on PCI
 419         help
 420           This option enables support for ARTOP PATA controllers.
 421
 422           If unsure, say N.
 423
 424 config PATA_ATIIXP
 425         tristate "ATI PATA support"
 426         depends on PCI
 427         help
 428           This option enables support for the ATI ATA interfaces
 429           found on the many ATI chipsets.
 430
 431           If unsure, say N.
 432
 433 config PATA_ATP867X
 434         tristate "ARTOP/Acard ATP867X PATA support"
 435         depends on PCI
 436         help
 437           This option enables support for ARTOP/Acard ATP867X PATA
 438           controllers.
 439
 440           If unsure, say N.
 441
 442 config PATA_BF54X
 443         tristate "Blackfin 54x ATAPI support"
 444         depends on BF542 || BF548 || BF549
 445         help
 446           This option enables support for the built-in ATAPI controller on
 447           Blackfin 54x family chips.
 448
 449           If unsure, say N.
 450
 451 config PATA_CMD64X
 452         tristate "CMD64x PATA support"
 453         depends on PCI
 454         help
 455           This option enables support for the CMD64x series chips
 456           except for the CMD640.
 457
 458           If unsure, say N.
 459
 460 config PATA_CS5520
 461         tristate "CS5510/5520 PATA support"
 462         depends on PCI && (X86_32 || COMPILE_TEST)
 463         help
 464           This option enables support for the Cyrix 5510/5520
 465           companion chip used with the MediaGX/Geode processor family.
 466
 467           If unsure, say N.
 468
 469 config PATA_CS5530
 470         tristate "CS5530 PATA support"
 471         depends on PCI && (X86_32 || COMPILE_TEST)
 472         help
 473           This option enables support for the Cyrix/NatSemi/AMD CS5530
 474           companion chip used with the MediaGX/Geode processor family.
 475
 476           If unsure, say N.
 477
 478 config PATA_CS5535
 479         tristate "CS5535 PATA support (Experimental)"
 480         depends on PCI && X86_32
 481         help
 482           This option enables support for the NatSemi/AMD CS5535
 483           companion chip used with the Geode processor family.
 484
 485           If unsure, say N.
 486
 487 config PATA_CS5536
 488         tristate "CS5536 PATA support"
 489         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 490         help
 491           This option enables support for the AMD CS5536
 492           companion chip used with the Geode LX processor family.
 493
 494           If unsure, say N.
 495
 496 config PATA_CYPRESS
 497         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 498         depends on PCI
 499         help
 500           This option enables support for the Cypress/Contaq CY82C693
 501           chipset found in some Alpha systems
 502
 503           If unsure, say N.
 504
 505 config PATA_EFAR
 506         tristate "EFAR SLC90E66 support"
 507         depends on PCI
 508         help
 509           This option enables support for the EFAR SLC90E66
 510           IDE controller found on some older machines.
 511
 512           If unsure, say N.
 513
 514 config PATA_EP93XX
 515         tristate "Cirrus Logic EP93xx PATA support"
 516         depends on ARCH_EP93XX
 517         help
 518           This option enables support for the PATA controller in
 519           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 520
 521           If unsure, say N.
 522
 523 config PATA_HPT366
 524         tristate "HPT 366/368 PATA support"
 525         depends on PCI
 526         help
 527           This option enables support for the HPT 366 and 368
 528           PATA controllers via the new ATA layer.
 529
 530           If unsure, say N.
 531
 532 config PATA_HPT37X
 533         tristate "HPT 370/370A/371/372/374/302 PATA support"
 534         depends on PCI
 535         help
 536           This option enables support for the majority of the later HPT
 537           PATA controllers via the new ATA layer.
 538
 539           If unsure, say N.
 540
 541 config PATA_HPT3X2N
 542         tristate "HPT 371N/372N/302N PATA support"
 543         depends on PCI
 544         help
 545           This option enables support for the N variant HPT PATA
 546           controllers via the new ATA layer.
 547
 548           If unsure, say N.
 549
 550 config PATA_HPT3X3
 551         tristate "HPT 343/363 PATA support"
 552         depends on PCI
 553         help
 554           This option enables support for the HPT 343/363
 555           PATA controllers via the new ATA layer
 556
 557           If unsure, say N.
 558
 559 config PATA_HPT3X3_DMA
 560         bool "HPT 343/363 DMA support"
 561         depends on PATA_HPT3X3
 562         help
 563           This option enables DMA support for the HPT343/363
 564           controllers. Enable with care as there are still some
 565           problems with DMA on this chipset.
 566
 567 config PATA_ICSIDE
 568         tristate "Acorn ICS PATA support"
 569         depends on ARM && ARCH_ACORN
 570         help
 571           On Acorn systems, say Y here if you wish to use the ICS PATA
 572           interface card.  This is not required for ICS partition support.
 573           If you are unsure, say N to this.
 574
 575 config PATA_IMX
 576         tristate "PATA support for Freescale iMX"
 577         depends on ARCH_MXC
 578         help
 579           This option enables support for the PATA host available on Freescale
 580           iMX SoCs.
 581
 582           If unsure, say N.
 583
 584 config PATA_IT8213
 585         tristate "IT8213 PATA support (Experimental)"
 586         depends on PCI
 587         help
 588           This option enables support for the ITE 821 PATA
 589           controllers via the new ATA layer.
 590
 591           If unsure, say N.
 592
 593 config PATA_IT821X
 594         tristate "IT8211/2 PATA support"
 595         depends on PCI
 596         help
 597           This option enables support for the ITE 8211 and 8212
 598           PATA controllers via the new ATA layer, including RAID
 599           mode.
 600
 601           If unsure, say N.
 602
 603 config PATA_JMICRON
 604         tristate "JMicron PATA support"
 605         depends on PCI
 606         help
 607           Enable support for the JMicron IDE controller, via the new
 608           ATA layer.
 609
 610           If unsure, say N.
 611
 612 config PATA_MACIO
 613         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 614         depends on PPC_PMAC
 615         help
 616           Most IDE capable PowerMacs have IDE busses driven by a variant
 617           of this controller which is part of the Apple chipset used on
 618           most PowerMac models. Some models have multiple busses using
 619           different chipsets, though generally, MacIO is one of them.
 620
 621 config PATA_MARVELL
 622         tristate "Marvell PATA support via legacy mode"
 623         depends on PCI
 624         help
 625           This option enables limited support for the Marvell 88SE61xx ATA
 626           controllers. If you wish to use only the SATA ports then select
 627           the AHCI driver alone. If you wish to the use the PATA port or
 628           both SATA and PATA include this driver.
 629
 630           If unsure, say N.
 631
 632 config PATA_MPC52xx
 633         tristate "Freescale MPC52xx SoC internal IDE"
 634         depends on PPC_MPC52xx && PPC_BESTCOMM
 635         select PPC_BESTCOMM_ATA
 636         help
 637           This option enables support for integrated IDE controller
 638           of the Freescale MPC52xx SoC.
 639
 640           If unsure, say N.
 641
 642 config PATA_NETCELL
 643         tristate "NETCELL Revolution RAID support"
 644         depends on PCI
 645         help
 646           This option enables support for the Netcell Revolution RAID
 647           PATA controller.
 648
 649           If unsure, say N.
 650
 651 config PATA_NINJA32
 652         tristate "Ninja32/Delkin Cardbus ATA support"
 653         depends on PCI
 654         help
 655           This option enables support for the Ninja32, Delkin and
 656           possibly other brands of Cardbus ATA adapter
 657
 658           If unsure, say N.
 659
 660 config PATA_NS87415
 661         tristate "Nat Semi NS87415 PATA support"
 662         depends on PCI
 663         help
 664           This option enables support for the National Semiconductor
 665           NS87415 PCI-IDE controller.
 666
 667           If unsure, say N.
 668
 669 config PATA_OLDPIIX
 670         tristate "Intel PATA old PIIX support"
 671         depends on PCI
 672         help
 673           This option enables support for early PIIX PATA support.
 674
 675           If unsure, say N.
 676
 677 config PATA_OPTIDMA
 678         tristate "OPTI FireStar PATA support (Very Experimental)"
 679         depends on PCI
 680         help
 681           This option enables DMA/PIO support for the later OPTi
 682           controllers found on some old motherboards and in some
 683           laptops.
 684
 685           If unsure, say N.
 686
 687 config PATA_PDC2027X
 688         tristate "Promise PATA 2027x support"
 689         depends on PCI
 690         help
 691           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 692
 693           If unsure, say N.
 694
 695 config PATA_PDC_OLD
 696         tristate "Older Promise PATA controller support"
 697         depends on PCI
 698         help
 699           This option enables support for the Promise 20246, 20262, 20263,
 700           20265 and 20267 adapters.
 701
 702           If unsure, say N.
 703
 704 config PATA_RADISYS
 705         tristate "RADISYS 82600 PATA support (Experimental)"
 706         depends on PCI
 707         help
 708           This option enables support for the RADISYS 82600
 709           PATA controllers via the new ATA layer
 710
 711           If unsure, say N.
 712
 713 config PATA_RDC
 714         tristate "RDC PATA support"
 715         depends on PCI
 716         help
 717           This option enables basic support for the later RDC PATA controllers
 718           controllers via the new ATA layer. For the RDC 1010, you need to
 719           enable the IT821X driver instead.
 720
 721           If unsure, say N.
 722
 723 config PATA_SC1200
 724         tristate "SC1200 PATA support"
 725         depends on PCI && (X86_32 || COMPILE_TEST)
 726         help
 727           This option enables support for the NatSemi/AMD SC1200 SoC
 728           companion chip used with the Geode processor family.
 729
 730           If unsure, say N.
 731
 732 config PATA_SCC
 733         tristate "Toshiba's Cell Reference Set IDE support"
 734         depends on PCI && PPC_CELLEB
 735         help
 736           This option enables support for the built-in IDE controller on
 737           Toshiba Cell Reference Board.
 738
 739           If unsure, say N.
 740
 741 config PATA_SCH
 742         tristate "Intel SCH PATA support"
 743         depends on PCI
 744         help
 745           This option enables support for Intel SCH PATA on the Intel
 746           SCH (US15W, US15L, UL11L) series host controllers.
 747
 748           If unsure, say N.
 749
 750 config PATA_SERVERWORKS
 751         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 752         depends on PCI
 753         help
 754           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 755           HT1000 PATA controllers, via the new ATA layer.
 756
 757           If unsure, say N.
 758
 759 config PATA_SIL680
 760         tristate "CMD / Silicon Image 680 PATA support"
 761         depends on PCI
 762         help
 763           This option enables support for CMD / Silicon Image 680 PATA.
 764
 765           If unsure, say N.
 766
 767 config PATA_SIS
 768         tristate "SiS PATA support"
 769         depends on PCI
 770         help
 771           This option enables support for SiS PATA controllers
 772
 773           If unsure, say N.
 774
 775 config PATA_TOSHIBA
 776         tristate "Toshiba Piccolo support (Experimental)"
 777         depends on PCI
 778         help
 779           Support for the Toshiba Piccolo controllers. Currently only the
 780           primary channel is supported by this driver.
 781
 782           If unsure, say N.
 783
 784 config PATA_TRIFLEX
 785         tristate "Compaq Triflex PATA support"
 786         depends on PCI
 787         help
 788           Enable support for the Compaq 'Triflex' IDE controller as found
 789           on many Compaq Pentium-Pro systems, via the new ATA layer.
 790
 791           If unsure, say N.
 792
 793 config PATA_VIA
 794         tristate "VIA PATA support"
 795         depends on PCI
 796         help
 797           This option enables support for the VIA PATA interfaces
 798           found on the many VIA chipsets.
 799
 800           If unsure, say N.
 801
 802 config PATA_PXA
 803         tristate "PXA DMA-capable PATA support"
 804         depends on ARCH_PXA
 805         help
 806           This option enables support for harddrive attached to PXA CPU's bus.
 807
 808           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 809                 is not capable of doing MWDMA, use pata_platform instead.
 810
 811           If unsure, say N.
 812
 813 config PATA_WINBOND
 814         tristate "Winbond SL82C105 PATA support"
 815         depends on PCI
 816         help
 817           This option enables support for SL82C105 PATA devices found in the
 818           Netwinder and some other systems
 819
 820           If unsure, say N.
 821
 822 endif # ATA_BMDMA
 823
 824 comment "PIO-only SFF controllers"
 825
 826 config PATA_AT32
 827         tristate "Atmel AVR32 PATA support (Experimental)"
 828         depends on AVR32 && PLATFORM_AT32AP
 829         help
 830           This option enables support for the IDE devices on the
 831           Atmel AT32AP platform.
 832
 833           If unsure, say N.
 834
 835 config PATA_AT91
 836         tristate "PATA support for AT91SAM9260"
 837         depends on ARM && SOC_AT91SAM9
 838         help
 839           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 840
 841           If unsure, say N.
 842
 843 config PATA_CMD640_PCI
 844         tristate "CMD640 PCI PATA support (Experimental)"
 845         depends on PCI
 846         help
 847           This option enables support for the CMD640 PCI IDE
 848           interface chip. Only the primary channel is currently
 849           supported.
 850
 851           If unsure, say N.
 852
 853 config PATA_ISAPNP
 854         tristate "ISA Plug and Play PATA support"
 855         depends on ISAPNP
 856         help
 857           This option enables support for ISA plug & play ATA
 858           controllers such as those found on old soundcards.
 859
 860           If unsure, say N.
 861
 862 config PATA_IXP4XX_CF
 863         tristate "IXP4XX Compact Flash support"
 864         depends on ARCH_IXP4XX
 865         help
 866           This option enables support for a Compact Flash connected on
 867           the ixp4xx expansion bus. This driver had been written for
 868           Loft/Avila boards in mind but can work with others.
 869
 870           If unsure, say N.
 871
 872 config PATA_MPIIX
 873         tristate "Intel PATA MPIIX support"
 874         depends on PCI
 875         help
 876           This option enables support for MPIIX PATA support.
 877
 878           If unsure, say N.
 879
 880 config PATA_NS87410
 881         tristate "Nat Semi NS87410 PATA support"
 882         depends on PCI
 883         help
 884           This option enables support for the National Semiconductor
 885           NS87410 PCI-IDE controller.
 886
 887           If unsure, say N.
 888
 889 config PATA_OPTI
 890         tristate "OPTI621/6215 PATA support (Very Experimental)"
 891         depends on PCI
 892         help
 893           This option enables full PIO support for the early Opti ATA
 894           controllers found on some old motherboards.
 895
 896           If unsure, say N.
 897
 898 config PATA_PALMLD
 899         tristate "Palm LifeDrive PATA support"
 900         depends on MACH_PALMLD
 901         help
 902           This option enables support for Palm LifeDrive's internal ATA
 903           port via the new ATA layer.
 904
 905           If unsure, say N.
 906
 907 config PATA_PCMCIA
 908         tristate "PCMCIA PATA support"
 909         depends on PCMCIA
 910         help
 911           This option enables support for PCMCIA ATA interfaces, including
 912           compact flash card adapters via the new ATA layer.
 913
 914           If unsure, say N.
 915
 916 config PATA_PLATFORM
 917         tristate "Generic platform device PATA support"
 918         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 919         help
 920           This option enables support for generic directly connected ATA
 921           devices commonly found on embedded systems.
 922
 923           If unsure, say N.
 924
 925 config PATA_OF_PLATFORM
 926         tristate "OpenFirmware platform device PATA support"
 927         depends on PATA_PLATFORM && OF
 928         help
 929           This option enables support for generic directly connected ATA
 930           devices commonly found on embedded systems with OpenFirmware
 931           bindings.
 932
 933           If unsure, say N.
 934
 935 config PATA_QDI
 936         tristate "QDI VLB PATA support"
 937         depends on ISA
 938         select PATA_LEGACY
 939         help
 940           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 941
 942 config PATA_RB532
 943         tristate "RouterBoard 532 PATA CompactFlash support"
 944         depends on MIKROTIK_RB532
 945         help
 946           This option enables support for the RouterBoard 532
 947           PATA CompactFlash controller.
 948
 949           If unsure, say N.
 950
 951 config PATA_RZ1000
 952         tristate "PC Tech RZ1000 PATA support"
 953         depends on PCI
 954         help
 955           This option enables basic support for the PC Tech RZ1000/1
 956           PATA controllers via the new ATA layer
 957
 958           If unsure, say N.
 959
 960 config PATA_SAMSUNG_CF
 961         tristate "Samsung SoC PATA support"
 962         depends on SAMSUNG_DEV_IDE
 963         help
 964           This option enables basic support for Samsung's S3C/S5P board
 965           PATA controllers via the new ATA layer
 966
 967           If unsure, say N.
 968
 969 config PATA_WINBOND_VLB
 970         tristate "Winbond W83759A VLB PATA support (Experimental)"
 971         depends on ISA
 972         select PATA_LEGACY
 973         help
 974           Support for the Winbond W83759A controller on Vesa Local Bus
 975           systems.
 976
 977 comment "Generic fallback / legacy drivers"
 978
 979 config PATA_ACPI
 980         tristate "ACPI firmware driver for PATA"
 981         depends on ATA_ACPI && ATA_BMDMA
 982         help
 983           This option enables an ACPI method driver which drives
 984           motherboard PATA controller interfaces through the ACPI
 985           firmware in the BIOS. This driver can sometimes handle
 986           otherwise unsupported hardware.
 987
 988 config ATA_GENERIC
 989         tristate "Generic ATA support"
 990         depends on PCI && ATA_BMDMA
 991         help
 992           This option enables support for generic BIOS configured
 993           ATA controllers via the new ATA layer
 994
 995           If unsure, say N.
 996
 997 config PATA_LEGACY
 998         tristate "Legacy ISA PATA support (Experimental)"
 999         depends on (ISA || PCI)
1000         help
1001           This option enables support for ISA/VLB/PCI bus legacy PATA
1002           ports and allows them to be accessed via the new ATA layer.
1003
1004           If unsure, say N.
1005
1006 endif # ATA_SFF
1007 endif # ATA