drivers/ata/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 #
   3 # SATA/PATA driver configuration
   4 #
   5
   6 config HAVE_PATA_PLATFORM
   7         bool
   8         help
   9           This is an internal configuration node for any machine that
  10           uses pata-platform driver to enable the relevant driver in the
  11           configuration structure without having to submit endless patches
  12           to update the PATA_PLATFORM entry.
  13
  14 menuconfig ATA
  15         tristate "Serial ATA and Parallel ATA drivers (libata)"
  16         depends on HAS_IOMEM
  17         depends on BLOCK
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 if HAS_DMA
  84
  85 comment "Controllers with non-SFF native interface"
  86
  87 config SATA_AHCI
  88         tristate "AHCI SATA support"
  89         depends on PCI
  90         help
  91           This option enables support for AHCI Serial ATA.
  92
  93           If unsure, say N.
  94
  95 config SATA_MOBILE_LPM_POLICY
  96         int "Default SATA Link Power Management policy for mobile chipsets"
  97         range 0 4
  98         default 0
  99         depends on SATA_AHCI
 100         help
 101           Select the Default SATA Link Power Management (LPM) policy to use
 102           for mobile / laptop variants of chipsets / "South Bridges".
 103
 104           The value set has the following meanings:
 105                 0 => Keep firmware settings
 106                 1 => Maximum performance
 107                 2 => Medium power
 108                 3 => Medium power with Device Initiated PM enabled
 109                 4 => Minimum power
 110
 111           Note "Minimum power" is known to cause issues, including disk
 112           corruption, with some disks and should not be used.
 113
 114 config SATA_AHCI_PLATFORM
 115         tristate "Platform AHCI SATA support"
 116         help
 117           This option enables support for Platform AHCI Serial ATA
 118           controllers.
 119
 120           If unsure, say N.
 121
 122 config AHCI_BRCM
 123         tristate "Broadcom AHCI SATA support"
 124         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
 125         help
 126           This option enables support for the AHCI SATA3 controller found on
 127           Broadcom SoC's.
 128
 129           If unsure, say N.
 130
 131 config AHCI_DA850
 132         tristate "DaVinci DA850 AHCI SATA support"
 133         depends on ARCH_DAVINCI_DA850
 134         help
 135           This option enables support for the DaVinci DA850 SoC's
 136           onboard AHCI SATA.
 137
 138           If unsure, say N.
 139
 140 config AHCI_DM816
 141         tristate "DaVinci DM816 AHCI SATA support"
 142         depends on ARCH_OMAP2PLUS
 143         help
 144           This option enables support for the DaVinci DM816 SoC's
 145           onboard AHCI SATA controller.
 146
 147           If unsure, say N.
 148
 149 config AHCI_ST
 150         tristate "ST AHCI SATA support"
 151         depends on ARCH_STI
 152         help
 153           This option enables support for ST AHCI SATA controller.
 154
 155           If unsure, say N.
 156
 157 config AHCI_IMX
 158         tristate "Freescale i.MX AHCI SATA support"
 159         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 160         depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 161         help
 162           This option enables support for the Freescale i.MX SoC's
 163           onboard AHCI SATA.
 164
 165           If unsure, say N.
 166
 167 config AHCI_CEVA
 168         tristate "CEVA AHCI SATA support"
 169         depends on OF
 170         help
 171           This option enables support for the CEVA AHCI SATA.
 172           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 173
 174           If unsure, say N.
 175
 176 config AHCI_MTK
 177         tristate "MediaTek AHCI SATA support"
 178         depends on ARCH_MEDIATEK
 179         select MFD_SYSCON
 180         help
 181           This option enables support for the MediaTek SoC's
 182           onboard AHCI SATA controller.
 183
 184           If unsure, say N.
 185
 186 config AHCI_MVEBU
 187         tristate "Marvell EBU AHCI SATA support"
 188         depends on ARCH_MVEBU
 189         help
 190           This option enables support for the Marvebu EBU SoC's
 191           onboard AHCI SATA.
 192
 193           If unsure, say N.
 194
 195 config AHCI_OCTEON
 196         tristate "Cavium Octeon Soc Serial ATA"
 197         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 198         default y
 199         help
 200           This option enables support for Cavium Octeon SoC Serial ATA.
 201
 202           If unsure, say N.
 203
 204 config AHCI_SUNXI
 205         tristate "Allwinner sunxi AHCI SATA support"
 206         depends on ARCH_SUNXI
 207         help
 208           This option enables support for the Allwinner sunxi SoC's
 209           onboard AHCI SATA.
 210
 211           If unsure, say N.
 212
 213 config AHCI_TEGRA
 214         tristate "NVIDIA Tegra124 AHCI SATA support"
 215         depends on ARCH_TEGRA
 216         help
 217           This option enables support for the NVIDIA Tegra124 SoC's
 218           onboard AHCI SATA.
 219
 220           If unsure, say N.
 221
 222 config AHCI_XGENE
 223         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 224         depends on PHY_XGENE
 225         help
 226          This option enables support for APM X-Gene SoC SATA host controller.
 227
 228 config AHCI_QORIQ
 229         tristate "Freescale QorIQ AHCI SATA support"
 230         depends on OF
 231         help
 232           This option enables support for the Freescale QorIQ AHCI SoC's
 233           onboard AHCI SATA.
 234
 235           If unsure, say N.
 236
 237 config SATA_FSL
 238         tristate "Freescale 3.0Gbps SATA support"
 239         depends on FSL_SOC
 240         help
 241           This option enables support for Freescale 3.0Gbps SATA controller.
 242           It can be found on MPC837x and MPC8315.
 243
 244           If unsure, say N.
 245
 246 config SATA_GEMINI
 247         tristate "Gemini SATA bridge support"
 248         depends on ARCH_GEMINI || COMPILE_TEST
 249         default ARCH_GEMINI
 250         help
 251           This enabled support for the FTIDE010 to SATA bridge
 252           found in Cortina Systems Gemini platform.
 253
 254           If unsure, say N.
 255
 256 config SATA_AHCI_SEATTLE
 257         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 258         depends on ARCH_SEATTLE
 259         help
 260          This option enables support for AMD Seattle SATA host controller.
 261
 262          If unsure, say N
 263
 264 config SATA_INIC162X
 265         tristate "Initio 162x SATA support (Very Experimental)"
 266         depends on PCI
 267         help
 268           This option enables support for Initio 162x Serial ATA.
 269
 270 config SATA_ACARD_AHCI
 271         tristate "ACard AHCI variant (ATP 8620)"
 272         depends on PCI
 273         help
 274           This option enables support for Acard.
 275
 276           If unsure, say N.
 277
 278 config SATA_SIL24
 279         tristate "Silicon Image 3124/3132 SATA support"
 280         depends on PCI
 281         help
 282           This option enables support for Silicon Image 3124/3132 Serial ATA.
 283
 284           If unsure, say N.
 285
 286 endif # HAS_DMA
 287
 288 config ATA_SFF
 289         bool "ATA SFF support (for legacy IDE and PATA)"
 290         default y
 291         help
 292           This option adds support for ATA controllers with SFF
 293           compliant or similar programming interface.
 294
 295           SFF is the legacy IDE interface that has been around since
 296           the dawn of time.  Almost all PATA controllers have an
 297           SFF interface.  Many SATA controllers have an SFF interface
 298           when configured into a legacy compatibility mode.
 299
 300           For users with exclusively modern controllers like AHCI,
 301           Silicon Image 3124, or Marvell 6440, you may choose to
 302           disable this unneeded SFF support.
 303
 304           If unsure, say Y.
 305
 306 if ATA_SFF
 307
 308 comment "SFF controllers with custom DMA interface"
 309
 310 config PDC_ADMA
 311         tristate "Pacific Digital ADMA support"
 312         depends on PCI
 313         help
 314           This option enables support for Pacific Digital ADMA controllers
 315
 316           If unsure, say N.
 317
 318 config PATA_OCTEON_CF
 319         tristate "OCTEON Boot Bus Compact Flash support"
 320         depends on CAVIUM_OCTEON_SOC
 321         help
 322           This option enables a polled compact flash driver for use with
 323           compact flash cards attached to the OCTEON boot bus.
 324
 325           If unsure, say N.
 326
 327 config SATA_QSTOR
 328         tristate "Pacific Digital SATA QStor support"
 329         depends on PCI
 330         help
 331           This option enables support for Pacific Digital Serial ATA QStor.
 332
 333           If unsure, say N.
 334
 335 config SATA_SX4
 336         tristate "Promise SATA SX4 support (Experimental)"
 337         depends on PCI
 338         help
 339           This option enables support for Promise Serial ATA SX4.
 340
 341           If unsure, say N.
 342
 343 config ATA_BMDMA
 344         bool "ATA BMDMA support"
 345         depends on HAS_DMA
 346         default y
 347         help
 348           This option adds support for SFF ATA controllers with BMDMA
 349           capability.  BMDMA stands for bus-master DMA and is the
 350           de facto DMA interface for SFF controllers.
 351
 352           If unsure, say Y.
 353
 354 if ATA_BMDMA
 355
 356 comment "SATA SFF controllers with BMDMA"
 357
 358 config ATA_PIIX
 359         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 360         depends on PCI
 361         help
 362           This option enables support for ICH5/6/7/8 Serial ATA
 363           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 364           host controllers.
 365
 366           If unsure, say N.
 367
 368 config SATA_DWC
 369         tristate "DesignWare Cores SATA support"
 370         depends on DMADEVICES
 371         select GENERIC_PHY
 372         help
 373           This option enables support for the on-chip SATA controller of the
 374           AppliedMicro processor 460EX.
 375
 376           If unsure, say N.
 377
 378 config SATA_DWC_OLD_DMA
 379         bool "Support old device trees"
 380         depends on SATA_DWC
 381         select DW_DMAC_CORE
 382         default y if 460EX
 383         help
 384           This option enables support for old device trees without the
 385           "dmas" property.
 386
 387 config SATA_DWC_DEBUG
 388         bool "Debugging driver version"
 389         depends on SATA_DWC
 390         help
 391           This option enables debugging output in the driver.
 392
 393 config SATA_DWC_VDEBUG
 394         bool "Verbose debug output"
 395         depends on SATA_DWC_DEBUG
 396         help
 397           This option enables the taskfile dumping and NCQ debugging.
 398
 399 config SATA_HIGHBANK
 400         tristate "Calxeda Highbank SATA support"
 401         depends on HAS_DMA
 402         depends on ARCH_HIGHBANK || COMPILE_TEST
 403         help
 404           This option enables support for the Calxeda Highbank SoC's
 405           onboard SATA.
 406
 407           If unsure, say N.
 408
 409 config SATA_MV
 410         tristate "Marvell SATA support"
 411         depends on HAS_DMA
 412         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 413                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 414         select GENERIC_PHY
 415         help
 416           This option enables support for the Marvell Serial ATA family.
 417           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 418           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 419
 420           If unsure, say N.
 421
 422 config SATA_NV
 423         tristate "NVIDIA SATA support"
 424         depends on PCI
 425         help
 426           This option enables support for NVIDIA Serial ATA.
 427
 428           If unsure, say N.
 429
 430 config SATA_PROMISE
 431         tristate "Promise SATA TX2/TX4 support"
 432         depends on PCI
 433         help
 434           This option enables support for Promise Serial ATA TX2/TX4.
 435
 436           If unsure, say N.
 437
 438 config SATA_RCAR
 439         tristate "Renesas R-Car SATA support"
 440         depends on ARCH_RENESAS || COMPILE_TEST
 441         help
 442           This option enables support for Renesas R-Car Serial ATA.
 443
 444           If unsure, say N.
 445
 446 config SATA_SIL
 447         tristate "Silicon Image SATA support"
 448         depends on PCI
 449         help
 450           This option enables support for Silicon Image Serial ATA.
 451
 452           If unsure, say N.
 453
 454 config SATA_SIS
 455         tristate "SiS 964/965/966/180 SATA support"
 456         depends on PCI
 457         select PATA_SIS
 458         help
 459           This option enables support for SiS Serial ATA on
 460           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 461           The PATA support for SiS 180 requires additionally to
 462           enable the PATA_SIS driver in the config.
 463           If unsure, say N.
 464
 465 config SATA_SVW
 466         tristate "ServerWorks Frodo / Apple K2 SATA support"
 467         depends on PCI
 468         help
 469           This option enables support for Broadcom/Serverworks/Apple K2
 470           SATA support.
 471
 472           If unsure, say N.
 473
 474 config SATA_ULI
 475         tristate "ULi Electronics SATA support"
 476         depends on PCI
 477         help
 478           This option enables support for ULi Electronics SATA.
 479
 480           If unsure, say N.
 481
 482 config SATA_VIA
 483         tristate "VIA SATA support"
 484         depends on PCI
 485         help
 486           This option enables support for VIA Serial ATA.
 487
 488           If unsure, say N.
 489
 490 config SATA_VITESSE
 491         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 492         depends on PCI
 493         help
 494           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 495
 496           If unsure, say N.
 497
 498 comment "PATA SFF controllers with BMDMA"
 499
 500 config PATA_ALI
 501         tristate "ALi PATA support"
 502         depends on PCI
 503         help
 504           This option enables support for the ALi ATA interfaces
 505           found on the many ALi chipsets.
 506
 507           If unsure, say N.
 508
 509 config PATA_AMD
 510         tristate "AMD/NVidia PATA support"
 511         depends on PCI
 512         help
 513           This option enables support for the AMD and NVidia PATA
 514           interfaces found on the chipsets for Athlon/Athlon64.
 515
 516           If unsure, say N.
 517
 518 config PATA_ARASAN_CF
 519         tristate "ARASAN CompactFlash PATA Controller Support"
 520         depends on ARCH_SPEAR13XX || COMPILE_TEST
 521         depends on DMADEVICES
 522         select DMA_ENGINE
 523         help
 524           Say Y here to support the ARASAN CompactFlash PATA controller
 525
 526 config PATA_ARTOP
 527         tristate "ARTOP 6210/6260 PATA support"
 528         depends on PCI
 529         help
 530           This option enables support for ARTOP PATA controllers.
 531
 532           If unsure, say N.
 533
 534 config PATA_ATIIXP
 535         tristate "ATI PATA support"
 536         depends on PCI
 537         help
 538           This option enables support for the ATI ATA interfaces
 539           found on the many ATI chipsets.
 540
 541           If unsure, say N.
 542
 543 config PATA_ATP867X
 544         tristate "ARTOP/Acard ATP867X PATA support"
 545         depends on PCI
 546         help
 547           This option enables support for ARTOP/Acard ATP867X PATA
 548           controllers.
 549
 550           If unsure, say N.
 551
 552 config PATA_BF54X
 553         tristate "Blackfin 54x ATAPI support"
 554         depends on BF542 || BF548 || BF549
 555         help
 556           This option enables support for the built-in ATAPI controller on
 557           Blackfin 54x family chips.
 558
 559           If unsure, say N.
 560
 561 config PATA_BK3710
 562         tristate "Palmchip BK3710 PATA support"
 563         depends on ARCH_DAVINCI
 564         help
 565           This option enables support for the integrated IDE controller on
 566           the TI DaVinci SoC.
 567
 568           If unsure, say N.
 569
 570 config PATA_CMD64X
 571         tristate "CMD64x PATA support"
 572         depends on PCI
 573         help
 574           This option enables support for the CMD64x series chips
 575           except for the CMD640.
 576
 577           If unsure, say N.
 578
 579 config PATA_CS5520
 580         tristate "CS5510/5520 PATA support"
 581         depends on PCI && (X86_32 || COMPILE_TEST)
 582         help
 583           This option enables support for the Cyrix 5510/5520
 584           companion chip used with the MediaGX/Geode processor family.
 585
 586           If unsure, say N.
 587
 588 config PATA_CS5530
 589         tristate "CS5530 PATA support"
 590         depends on PCI && (X86_32 || COMPILE_TEST)
 591         help
 592           This option enables support for the Cyrix/NatSemi/AMD CS5530
 593           companion chip used with the MediaGX/Geode processor family.
 594
 595           If unsure, say N.
 596
 597 config PATA_CS5535
 598         tristate "CS5535 PATA support (Experimental)"
 599         depends on PCI && X86_32
 600         help
 601           This option enables support for the NatSemi/AMD CS5535
 602           companion chip used with the Geode processor family.
 603
 604           If unsure, say N.
 605
 606 config PATA_CS5536
 607         tristate "CS5536 PATA support"
 608         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 609         help
 610           This option enables support for the AMD CS5536
 611           companion chip used with the Geode LX processor family.
 612
 613           If unsure, say N.
 614
 615 config PATA_CYPRESS
 616         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 617         depends on PCI
 618         help
 619           This option enables support for the Cypress/Contaq CY82C693
 620           chipset found in some Alpha systems
 621
 622           If unsure, say N.
 623
 624 config PATA_EFAR
 625         tristate "EFAR SLC90E66 support"
 626         depends on PCI
 627         help
 628           This option enables support for the EFAR SLC90E66
 629           IDE controller found on some older machines.
 630
 631           If unsure, say N.
 632
 633 config PATA_EP93XX
 634         tristate "Cirrus Logic EP93xx PATA support"
 635         depends on ARCH_EP93XX
 636         help
 637           This option enables support for the PATA controller in
 638           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 639
 640           If unsure, say N.
 641
 642 config PATA_FTIDE010
 643         tristate "Faraday Technology FTIDE010 PATA support"
 644         depends on OF
 645         depends on ARM
 646         depends on SATA_GEMINI
 647         help
 648           This option enables support for the Faraday FTIDE010
 649           PATA controller found in the Cortina Gemini SoCs.
 650
 651           If unsure, say N.
 652
 653 config PATA_HPT366
 654         tristate "HPT 366/368 PATA support"
 655         depends on PCI
 656         help
 657           This option enables support for the HPT 366 and 368
 658           PATA controllers via the new ATA layer.
 659
 660           If unsure, say N.
 661
 662 config PATA_HPT37X
 663         tristate "HPT 370/370A/371/372/374/302 PATA support"
 664         depends on PCI
 665         help
 666           This option enables support for the majority of the later HPT
 667           PATA controllers via the new ATA layer.
 668
 669           If unsure, say N.
 670
 671 config PATA_HPT3X2N
 672         tristate "HPT 371N/372N/302N PATA support"
 673         depends on PCI
 674         help
 675           This option enables support for the N variant HPT PATA
 676           controllers via the new ATA layer.
 677
 678           If unsure, say N.
 679
 680 config PATA_HPT3X3
 681         tristate "HPT 343/363 PATA support"
 682         depends on PCI
 683         help
 684           This option enables support for the HPT 343/363
 685           PATA controllers via the new ATA layer
 686
 687           If unsure, say N.
 688
 689 config PATA_HPT3X3_DMA
 690         bool "HPT 343/363 DMA support"
 691         depends on PATA_HPT3X3
 692         help
 693           This option enables DMA support for the HPT343/363
 694           controllers. Enable with care as there are still some
 695           problems with DMA on this chipset.
 696
 697 config PATA_ICSIDE
 698         tristate "Acorn ICS PATA support"
 699         depends on ARM && ARCH_ACORN
 700         help
 701           On Acorn systems, say Y here if you wish to use the ICS PATA
 702           interface card.  This is not required for ICS partition support.
 703           If you are unsure, say N to this.
 704
 705 config PATA_IMX
 706         tristate "PATA support for Freescale iMX"
 707         depends on ARCH_MXC
 708         help
 709           This option enables support for the PATA host available on Freescale
 710           iMX SoCs.
 711
 712           If unsure, say N.
 713
 714 config PATA_IT8213
 715         tristate "IT8213 PATA support (Experimental)"
 716         depends on PCI
 717         help
 718           This option enables support for the ITE 821 PATA
 719           controllers via the new ATA layer.
 720
 721           If unsure, say N.
 722
 723 config PATA_IT821X
 724         tristate "IT8211/2 PATA support"
 725         depends on PCI
 726         help
 727           This option enables support for the ITE 8211 and 8212
 728           PATA controllers via the new ATA layer, including RAID
 729           mode.
 730
 731           If unsure, say N.
 732
 733 config PATA_JMICRON
 734         tristate "JMicron PATA support"
 735         depends on PCI
 736         help
 737           Enable support for the JMicron IDE controller, via the new
 738           ATA layer.
 739
 740           If unsure, say N.
 741
 742 config PATA_MACIO
 743         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 744         depends on PPC_PMAC
 745         help
 746           Most IDE capable PowerMacs have IDE busses driven by a variant
 747           of this controller which is part of the Apple chipset used on
 748           most PowerMac models. Some models have multiple busses using
 749           different chipsets, though generally, MacIO is one of them.
 750
 751 config PATA_MARVELL
 752         tristate "Marvell PATA support via legacy mode"
 753         depends on PCI
 754         help
 755           This option enables limited support for the Marvell 88SE61xx ATA
 756           controllers. If you wish to use only the SATA ports then select
 757           the AHCI driver alone. If you wish to the use the PATA port or
 758           both SATA and PATA include this driver.
 759
 760           If unsure, say N.
 761
 762 config PATA_MPC52xx
 763         tristate "Freescale MPC52xx SoC internal IDE"
 764         depends on PPC_MPC52xx && PPC_BESTCOMM
 765         select PPC_BESTCOMM_ATA
 766         help
 767           This option enables support for integrated IDE controller
 768           of the Freescale MPC52xx SoC.
 769
 770           If unsure, say N.
 771
 772 config PATA_NETCELL
 773         tristate "NETCELL Revolution RAID support"
 774         depends on PCI
 775         help
 776           This option enables support for the Netcell Revolution RAID
 777           PATA controller.
 778
 779           If unsure, say N.
 780
 781 config PATA_NINJA32
 782         tristate "Ninja32/Delkin Cardbus ATA support"
 783         depends on PCI
 784         help
 785           This option enables support for the Ninja32, Delkin and
 786           possibly other brands of Cardbus ATA adapter
 787
 788           If unsure, say N.
 789
 790 config PATA_NS87415
 791         tristate "Nat Semi NS87415 PATA support"
 792         depends on PCI
 793         help
 794           This option enables support for the National Semiconductor
 795           NS87415 PCI-IDE controller.
 796
 797           If unsure, say N.
 798
 799 config PATA_OLDPIIX
 800         tristate "Intel PATA old PIIX support"
 801         depends on PCI
 802         help
 803           This option enables support for early PIIX PATA support.
 804
 805           If unsure, say N.
 806
 807 config PATA_OPTIDMA
 808         tristate "OPTI FireStar PATA support (Very Experimental)"
 809         depends on PCI
 810         help
 811           This option enables DMA/PIO support for the later OPTi
 812           controllers found on some old motherboards and in some
 813           laptops.
 814
 815           If unsure, say N.
 816
 817 config PATA_PDC2027X
 818         tristate "Promise PATA 2027x support"
 819         depends on PCI
 820         help
 821           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 822
 823           If unsure, say N.
 824
 825 config PATA_PDC_OLD
 826         tristate "Older Promise PATA controller support"
 827         depends on PCI
 828         help
 829           This option enables support for the Promise 20246, 20262, 20263,
 830           20265 and 20267 adapters.
 831
 832           If unsure, say N.
 833
 834 config PATA_RADISYS
 835         tristate "RADISYS 82600 PATA support (Experimental)"
 836         depends on PCI
 837         help
 838           This option enables support for the RADISYS 82600
 839           PATA controllers via the new ATA layer
 840
 841           If unsure, say N.
 842
 843 config PATA_RDC
 844         tristate "RDC PATA support"
 845         depends on PCI
 846         help
 847           This option enables basic support for the later RDC PATA controllers
 848           controllers via the new ATA layer. For the RDC 1010, you need to
 849           enable the IT821X driver instead.
 850
 851           If unsure, say N.
 852
 853 config PATA_SC1200
 854         tristate "SC1200 PATA support"
 855         depends on PCI && (X86_32 || COMPILE_TEST)
 856         help
 857           This option enables support for the NatSemi/AMD SC1200 SoC
 858           companion chip used with the Geode processor family.
 859
 860           If unsure, say N.
 861
 862 config PATA_SCH
 863         tristate "Intel SCH PATA support"
 864         depends on PCI
 865         help
 866           This option enables support for Intel SCH PATA on the Intel
 867           SCH (US15W, US15L, UL11L) series host controllers.
 868
 869           If unsure, say N.
 870
 871 config PATA_SERVERWORKS
 872         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 873         depends on PCI
 874         help
 875           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 876           HT1000 PATA controllers, via the new ATA layer.
 877
 878           If unsure, say N.
 879
 880 config PATA_SIL680
 881         tristate "CMD / Silicon Image 680 PATA support"
 882         depends on PCI
 883         help
 884           This option enables support for CMD / Silicon Image 680 PATA.
 885
 886           If unsure, say N.
 887
 888 config PATA_SIS
 889         tristate "SiS PATA support"
 890         depends on PCI
 891         help
 892           This option enables support for SiS PATA controllers
 893
 894           If unsure, say N.
 895
 896 config PATA_TOSHIBA
 897         tristate "Toshiba Piccolo support (Experimental)"
 898         depends on PCI
 899         help
 900           Support for the Toshiba Piccolo controllers. Currently only the
 901           primary channel is supported by this driver.
 902
 903           If unsure, say N.
 904
 905 config PATA_TRIFLEX
 906         tristate "Compaq Triflex PATA support"
 907         depends on PCI
 908         help
 909           Enable support for the Compaq 'Triflex' IDE controller as found
 910           on many Compaq Pentium-Pro systems, via the new ATA layer.
 911
 912           If unsure, say N.
 913
 914 config PATA_VIA
 915         tristate "VIA PATA support"
 916         depends on PCI
 917         help
 918           This option enables support for the VIA PATA interfaces
 919           found on the many VIA chipsets.
 920
 921           If unsure, say N.
 922
 923 config PATA_PXA
 924         tristate "PXA DMA-capable PATA support"
 925         depends on ARCH_PXA
 926         help
 927           This option enables support for harddrive attached to PXA CPU's bus.
 928
 929           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 930                 is not capable of doing MWDMA, use pata_platform instead.
 931
 932           If unsure, say N.
 933
 934 config PATA_WINBOND
 935         tristate "Winbond SL82C105 PATA support"
 936         depends on PCI
 937         help
 938           This option enables support for SL82C105 PATA devices found in the
 939           Netwinder and some other systems
 940
 941           If unsure, say N.
 942
 943 endif # ATA_BMDMA
 944
 945 comment "PIO-only SFF controllers"
 946
 947 config PATA_AT32
 948         tristate "Atmel AVR32 PATA support (Experimental)"
 949         depends on AVR32 && PLATFORM_AT32AP
 950         help
 951           This option enables support for the IDE devices on the
 952           Atmel AT32AP platform.
 953
 954           If unsure, say N.
 955
 956 config PATA_CMD640_PCI
 957         tristate "CMD640 PCI PATA support (Experimental)"
 958         depends on PCI
 959         help
 960           This option enables support for the CMD640 PCI IDE
 961           interface chip. Only the primary channel is currently
 962           supported.
 963
 964           If unsure, say N.
 965
 966 config PATA_FALCON
 967         tristate "Atari Falcon PATA support"
 968         depends on M68K && ATARI
 969         help
 970           This option enables support for the on-board IDE
 971           interface on the Atari Falcon.
 972
 973           If unsure, say N.
 974
 975 config PATA_ISAPNP
 976         tristate "ISA Plug and Play PATA support"
 977         depends on ISAPNP
 978         help
 979           This option enables support for ISA plug & play ATA
 980           controllers such as those found on old soundcards.
 981
 982           If unsure, say N.
 983
 984 config PATA_IXP4XX_CF
 985         tristate "IXP4XX Compact Flash support"
 986         depends on ARCH_IXP4XX
 987         help
 988           This option enables support for a Compact Flash connected on
 989           the ixp4xx expansion bus. This driver had been written for
 990           Loft/Avila boards in mind but can work with others.
 991
 992           If unsure, say N.
 993
 994 config PATA_MPIIX
 995         tristate "Intel PATA MPIIX support"
 996         depends on PCI
 997         help
 998           This option enables support for MPIIX PATA support.
 999
1000           If unsure, say N.
1001
1002 config PATA_NS87410
1003         tristate "Nat Semi NS87410 PATA support"
1004         depends on PCI
1005         help
1006           This option enables support for the National Semiconductor
1007           NS87410 PCI-IDE controller.
1008
1009           If unsure, say N.
1010
1011 config PATA_OPTI
1012         tristate "OPTI621/6215 PATA support (Very Experimental)"
1013         depends on PCI
1014         help
1015           This option enables full PIO support for the early Opti ATA
1016           controllers found on some old motherboards.
1017
1018           If unsure, say N.
1019
1020 config PATA_PALMLD
1021         tristate "Palm LifeDrive PATA support"
1022         depends on MACH_PALMLD
1023         help
1024           This option enables support for Palm LifeDrive's internal ATA
1025           port via the new ATA layer.
1026
1027           If unsure, say N.
1028
1029 config PATA_PCMCIA
1030         tristate "PCMCIA PATA support"
1031         depends on PCMCIA
1032         help
1033           This option enables support for PCMCIA ATA interfaces, including
1034           compact flash card adapters via the new ATA layer.
1035
1036           If unsure, say N.
1037
1038 config PATA_PLATFORM
1039         tristate "Generic platform device PATA support"
1040         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
1041         help
1042           This option enables support for generic directly connected ATA
1043           devices commonly found on embedded systems.
1044
1045           If unsure, say N.
1046
1047 config PATA_OF_PLATFORM
1048         tristate "OpenFirmware platform device PATA support"
1049         depends on PATA_PLATFORM && OF
1050         help
1051           This option enables support for generic directly connected ATA
1052           devices commonly found on embedded systems with OpenFirmware
1053           bindings.
1054
1055           If unsure, say N.
1056
1057 config PATA_QDI
1058         tristate "QDI VLB PATA support"
1059         depends on ISA
1060         select PATA_LEGACY
1061         help
1062           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1063
1064 config PATA_RB532
1065         tristate "RouterBoard 532 PATA CompactFlash support"
1066         depends on MIKROTIK_RB532
1067         help
1068           This option enables support for the RouterBoard 532
1069           PATA CompactFlash controller.
1070
1071           If unsure, say N.
1072
1073 config PATA_RZ1000
1074         tristate "PC Tech RZ1000 PATA support"
1075         depends on PCI
1076         help
1077           This option enables basic support for the PC Tech RZ1000/1
1078           PATA controllers via the new ATA layer
1079
1080           If unsure, say N.
1081
1082 config PATA_SAMSUNG_CF
1083         tristate "Samsung SoC PATA support"
1084         depends on SAMSUNG_DEV_IDE
1085         help
1086           This option enables basic support for Samsung's S3C/S5P board
1087           PATA controllers via the new ATA layer
1088
1089           If unsure, say N.
1090
1091 config PATA_WINBOND_VLB
1092         tristate "Winbond W83759A VLB PATA support (Experimental)"
1093         depends on ISA
1094         select PATA_LEGACY
1095         help
1096           Support for the Winbond W83759A controller on Vesa Local Bus
1097           systems.
1098
1099 comment "Generic fallback / legacy drivers"
1100
1101 config PATA_ACPI
1102         tristate "ACPI firmware driver for PATA"
1103         depends on ATA_ACPI && ATA_BMDMA
1104         help
1105           This option enables an ACPI method driver which drives
1106           motherboard PATA controller interfaces through the ACPI
1107           firmware in the BIOS. This driver can sometimes handle
1108           otherwise unsupported hardware.
1109
1110 config ATA_GENERIC
1111         tristate "Generic ATA support"
1112         depends on PCI && ATA_BMDMA
1113         help
1114           This option enables support for generic BIOS configured
1115           ATA controllers via the new ATA layer
1116
1117           If unsure, say N.
1118
1119 config PATA_LEGACY
1120         tristate "Legacy ISA PATA support (Experimental)"
1121         depends on (ISA || PCI)
1122         help
1123           This option enables support for ISA/VLB/PCI bus legacy PATA
1124           ports and allows them to be accessed via the new ATA layer.
1125
1126           If unsure, say N.
1127
1128 endif # ATA_SFF
1129 endif # ATA