drivers/ata/Kconfig

   1 # SPDX-License-Identifier: GPL-2.0
   2 #
   3 # SATA/PATA driver configuration
   4 #
   5
   6 config HAVE_PATA_PLATFORM
   7         bool
   8         help
   9           This is an internal configuration node for any machine that
  10           uses pata-platform driver to enable the relevant driver in the
  11           configuration structure without having to submit endless patches
  12           to update the PATA_PLATFORM entry.
  13
  14 menuconfig ATA
  15         tristate "Serial ATA and Parallel ATA drivers (libata)"
  16         depends on HAS_IOMEM
  17         depends on BLOCK
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 if HAS_DMA
  84
  85 comment "Controllers with non-SFF native interface"
  86
  87 config SATA_AHCI
  88         tristate "AHCI SATA support"
  89         depends on PCI
  90         help
  91           This option enables support for AHCI Serial ATA.
  92
  93           If unsure, say N.
  94
  95 config SATA_AHCI_PLATFORM
  96         tristate "Platform AHCI SATA support"
  97         help
  98           This option enables support for Platform AHCI Serial ATA
  99           controllers.
 100
 101           If unsure, say N.
 102
 103 config AHCI_BRCM
 104         tristate "Broadcom AHCI SATA support"
 105         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
 106         help
 107           This option enables support for the AHCI SATA3 controller found on
 108           Broadcom SoC's.
 109
 110           If unsure, say N.
 111
 112 config AHCI_DA850
 113         tristate "DaVinci DA850 AHCI SATA support"
 114         depends on ARCH_DAVINCI_DA850
 115         help
 116           This option enables support for the DaVinci DA850 SoC's
 117           onboard AHCI SATA.
 118
 119           If unsure, say N.
 120
 121 config AHCI_DM816
 122         tristate "DaVinci DM816 AHCI SATA support"
 123         depends on ARCH_OMAP2PLUS
 124         help
 125           This option enables support for the DaVinci DM816 SoC's
 126           onboard AHCI SATA controller.
 127
 128           If unsure, say N.
 129
 130 config AHCI_ST
 131         tristate "ST AHCI SATA support"
 132         depends on ARCH_STI
 133         help
 134           This option enables support for ST AHCI SATA controller.
 135
 136           If unsure, say N.
 137
 138 config AHCI_IMX
 139         tristate "Freescale i.MX AHCI SATA support"
 140         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 141         depends on (HWMON && (THERMAL || !THERMAL_OF)) || !HWMON
 142         help
 143           This option enables support for the Freescale i.MX SoC's
 144           onboard AHCI SATA.
 145
 146           If unsure, say N.
 147
 148 config AHCI_CEVA
 149         tristate "CEVA AHCI SATA support"
 150         depends on OF
 151         help
 152           This option enables support for the CEVA AHCI SATA.
 153           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 154
 155           If unsure, say N.
 156
 157 config AHCI_MTK
 158         tristate "MediaTek AHCI SATA support"
 159         depends on ARCH_MEDIATEK
 160         select MFD_SYSCON
 161         help
 162           This option enables support for the MediaTek SoC's
 163           onboard AHCI SATA controller.
 164
 165           If unsure, say N.
 166
 167 config AHCI_MVEBU
 168         tristate "Marvell EBU AHCI SATA support"
 169         depends on ARCH_MVEBU
 170         help
 171           This option enables support for the Marvebu EBU SoC's
 172           onboard AHCI SATA.
 173
 174           If unsure, say N.
 175
 176 config AHCI_OCTEON
 177         tristate "Cavium Octeon Soc Serial ATA"
 178         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 179         default y
 180         help
 181           This option enables support for Cavium Octeon SoC Serial ATA.
 182
 183           If unsure, say N.
 184
 185 config AHCI_SUNXI
 186         tristate "Allwinner sunxi AHCI SATA support"
 187         depends on ARCH_SUNXI
 188         help
 189           This option enables support for the Allwinner sunxi SoC's
 190           onboard AHCI SATA.
 191
 192           If unsure, say N.
 193
 194 config AHCI_TEGRA
 195         tristate "NVIDIA Tegra124 AHCI SATA support"
 196         depends on ARCH_TEGRA
 197         help
 198           This option enables support for the NVIDIA Tegra124 SoC's
 199           onboard AHCI SATA.
 200
 201           If unsure, say N.
 202
 203 config AHCI_XGENE
 204         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 205         depends on PHY_XGENE
 206         help
 207          This option enables support for APM X-Gene SoC SATA host controller.
 208
 209 config AHCI_QORIQ
 210         tristate "Freescale QorIQ AHCI SATA support"
 211         depends on OF
 212         help
 213           This option enables support for the Freescale QorIQ AHCI SoC's
 214           onboard AHCI SATA.
 215
 216           If unsure, say N.
 217
 218 config SATA_FSL
 219         tristate "Freescale 3.0Gbps SATA support"
 220         depends on FSL_SOC
 221         help
 222           This option enables support for Freescale 3.0Gbps SATA controller.
 223           It can be found on MPC837x and MPC8315.
 224
 225           If unsure, say N.
 226
 227 config SATA_GEMINI
 228         tristate "Gemini SATA bridge support"
 229         depends on ARCH_GEMINI || COMPILE_TEST
 230         default ARCH_GEMINI
 231         help
 232           This enabled support for the FTIDE010 to SATA bridge
 233           found in Cortina Systems Gemini platform.
 234
 235           If unsure, say N.
 236
 237 config SATA_AHCI_SEATTLE
 238         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 239         depends on ARCH_SEATTLE
 240         help
 241          This option enables support for AMD Seattle SATA host controller.
 242
 243          If unsure, say N
 244
 245 config SATA_INIC162X
 246         tristate "Initio 162x SATA support (Very Experimental)"
 247         depends on PCI
 248         help
 249           This option enables support for Initio 162x Serial ATA.
 250
 251 config SATA_ACARD_AHCI
 252         tristate "ACard AHCI variant (ATP 8620)"
 253         depends on PCI
 254         help
 255           This option enables support for Acard.
 256
 257           If unsure, say N.
 258
 259 config SATA_SIL24
 260         tristate "Silicon Image 3124/3132 SATA support"
 261         depends on PCI
 262         help
 263           This option enables support for Silicon Image 3124/3132 Serial ATA.
 264
 265           If unsure, say N.
 266
 267 endif # HAS_DMA
 268
 269 config ATA_SFF
 270         bool "ATA SFF support (for legacy IDE and PATA)"
 271         default y
 272         help
 273           This option adds support for ATA controllers with SFF
 274           compliant or similar programming interface.
 275
 276           SFF is the legacy IDE interface that has been around since
 277           the dawn of time.  Almost all PATA controllers have an
 278           SFF interface.  Many SATA controllers have an SFF interface
 279           when configured into a legacy compatibility mode.
 280
 281           For users with exclusively modern controllers like AHCI,
 282           Silicon Image 3124, or Marvell 6440, you may choose to
 283           disable this unneeded SFF support.
 284
 285           If unsure, say Y.
 286
 287 if ATA_SFF
 288
 289 comment "SFF controllers with custom DMA interface"
 290
 291 config PDC_ADMA
 292         tristate "Pacific Digital ADMA support"
 293         depends on PCI
 294         help
 295           This option enables support for Pacific Digital ADMA controllers
 296
 297           If unsure, say N.
 298
 299 config PATA_OCTEON_CF
 300         tristate "OCTEON Boot Bus Compact Flash support"
 301         depends on CAVIUM_OCTEON_SOC
 302         help
 303           This option enables a polled compact flash driver for use with
 304           compact flash cards attached to the OCTEON boot bus.
 305
 306           If unsure, say N.
 307
 308 config SATA_QSTOR
 309         tristate "Pacific Digital SATA QStor support"
 310         depends on PCI
 311         help
 312           This option enables support for Pacific Digital Serial ATA QStor.
 313
 314           If unsure, say N.
 315
 316 config SATA_SX4
 317         tristate "Promise SATA SX4 support (Experimental)"
 318         depends on PCI
 319         help
 320           This option enables support for Promise Serial ATA SX4.
 321
 322           If unsure, say N.
 323
 324 config ATA_BMDMA
 325         bool "ATA BMDMA support"
 326         depends on HAS_DMA
 327         default y
 328         help
 329           This option adds support for SFF ATA controllers with BMDMA
 330           capability.  BMDMA stands for bus-master DMA and is the
 331           de facto DMA interface for SFF controllers.
 332
 333           If unsure, say Y.
 334
 335 if ATA_BMDMA
 336
 337 comment "SATA SFF controllers with BMDMA"
 338
 339 config ATA_PIIX
 340         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 341         depends on PCI
 342         help
 343           This option enables support for ICH5/6/7/8 Serial ATA
 344           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 345           host controllers.
 346
 347           If unsure, say N.
 348
 349 config SATA_DWC
 350         tristate "DesignWare Cores SATA support"
 351         depends on DMADEVICES
 352         select GENERIC_PHY
 353         help
 354           This option enables support for the on-chip SATA controller of the
 355           AppliedMicro processor 460EX.
 356
 357           If unsure, say N.
 358
 359 config SATA_DWC_OLD_DMA
 360         bool "Support old device trees"
 361         depends on SATA_DWC
 362         select DW_DMAC_CORE
 363         default y if 460EX
 364         help
 365           This option enables support for old device trees without the
 366           "dmas" property.
 367
 368 config SATA_DWC_DEBUG
 369         bool "Debugging driver version"
 370         depends on SATA_DWC
 371         help
 372           This option enables debugging output in the driver.
 373
 374 config SATA_DWC_VDEBUG
 375         bool "Verbose debug output"
 376         depends on SATA_DWC_DEBUG
 377         help
 378           This option enables the taskfile dumping and NCQ debugging.
 379
 380 config SATA_HIGHBANK
 381         tristate "Calxeda Highbank SATA support"
 382         depends on HAS_DMA
 383         depends on ARCH_HIGHBANK || COMPILE_TEST
 384         help
 385           This option enables support for the Calxeda Highbank SoC's
 386           onboard SATA.
 387
 388           If unsure, say N.
 389
 390 config SATA_MV
 391         tristate "Marvell SATA support"
 392         depends on HAS_DMA
 393         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 394                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 395         select GENERIC_PHY
 396         help
 397           This option enables support for the Marvell Serial ATA family.
 398           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 399           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 400
 401           If unsure, say N.
 402
 403 config SATA_NV
 404         tristate "NVIDIA SATA support"
 405         depends on PCI
 406         help
 407           This option enables support for NVIDIA Serial ATA.
 408
 409           If unsure, say N.
 410
 411 config SATA_PROMISE
 412         tristate "Promise SATA TX2/TX4 support"
 413         depends on PCI
 414         help
 415           This option enables support for Promise Serial ATA TX2/TX4.
 416
 417           If unsure, say N.
 418
 419 config SATA_RCAR
 420         tristate "Renesas R-Car SATA support"
 421         depends on ARCH_RENESAS || COMPILE_TEST
 422         help
 423           This option enables support for Renesas R-Car Serial ATA.
 424
 425           If unsure, say N.
 426
 427 config SATA_SIL
 428         tristate "Silicon Image SATA support"
 429         depends on PCI
 430         help
 431           This option enables support for Silicon Image Serial ATA.
 432
 433           If unsure, say N.
 434
 435 config SATA_SIS
 436         tristate "SiS 964/965/966/180 SATA support"
 437         depends on PCI
 438         select PATA_SIS
 439         help
 440           This option enables support for SiS Serial ATA on
 441           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 442           The PATA support for SiS 180 requires additionally to
 443           enable the PATA_SIS driver in the config.
 444           If unsure, say N.
 445
 446 config SATA_SVW
 447         tristate "ServerWorks Frodo / Apple K2 SATA support"
 448         depends on PCI
 449         help
 450           This option enables support for Broadcom/Serverworks/Apple K2
 451           SATA support.
 452
 453           If unsure, say N.
 454
 455 config SATA_ULI
 456         tristate "ULi Electronics SATA support"
 457         depends on PCI
 458         help
 459           This option enables support for ULi Electronics SATA.
 460
 461           If unsure, say N.
 462
 463 config SATA_VIA
 464         tristate "VIA SATA support"
 465         depends on PCI
 466         help
 467           This option enables support for VIA Serial ATA.
 468
 469           If unsure, say N.
 470
 471 config SATA_VITESSE
 472         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 473         depends on PCI
 474         help
 475           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 476
 477           If unsure, say N.
 478
 479 comment "PATA SFF controllers with BMDMA"
 480
 481 config PATA_ALI
 482         tristate "ALi PATA support"
 483         depends on PCI
 484         help
 485           This option enables support for the ALi ATA interfaces
 486           found on the many ALi chipsets.
 487
 488           If unsure, say N.
 489
 490 config PATA_AMD
 491         tristate "AMD/NVidia PATA support"
 492         depends on PCI
 493         help
 494           This option enables support for the AMD and NVidia PATA
 495           interfaces found on the chipsets for Athlon/Athlon64.
 496
 497           If unsure, say N.
 498
 499 config PATA_ARASAN_CF
 500         tristate "ARASAN CompactFlash PATA Controller Support"
 501         depends on ARCH_SPEAR13XX || COMPILE_TEST
 502         depends on DMADEVICES
 503         select DMA_ENGINE
 504         help
 505           Say Y here to support the ARASAN CompactFlash PATA controller
 506
 507 config PATA_ARTOP
 508         tristate "ARTOP 6210/6260 PATA support"
 509         depends on PCI
 510         help
 511           This option enables support for ARTOP PATA controllers.
 512
 513           If unsure, say N.
 514
 515 config PATA_ATIIXP
 516         tristate "ATI PATA support"
 517         depends on PCI
 518         help
 519           This option enables support for the ATI ATA interfaces
 520           found on the many ATI chipsets.
 521
 522           If unsure, say N.
 523
 524 config PATA_ATP867X
 525         tristate "ARTOP/Acard ATP867X PATA support"
 526         depends on PCI
 527         help
 528           This option enables support for ARTOP/Acard ATP867X PATA
 529           controllers.
 530
 531           If unsure, say N.
 532
 533 config PATA_BF54X
 534         tristate "Blackfin 54x ATAPI support"
 535         depends on BF542 || BF548 || BF549
 536         help
 537           This option enables support for the built-in ATAPI controller on
 538           Blackfin 54x family chips.
 539
 540           If unsure, say N.
 541
 542 config PATA_BK3710
 543         tristate "Palmchip BK3710 PATA support"
 544         depends on ARCH_DAVINCI
 545         help
 546           This option enables support for the integrated IDE controller on
 547           the TI DaVinci SoC.
 548
 549           If unsure, say N.
 550
 551 config PATA_CMD64X
 552         tristate "CMD64x PATA support"
 553         depends on PCI
 554         help
 555           This option enables support for the CMD64x series chips
 556           except for the CMD640.
 557
 558           If unsure, say N.
 559
 560 config PATA_CS5520
 561         tristate "CS5510/5520 PATA support"
 562         depends on PCI && (X86_32 || COMPILE_TEST)
 563         help
 564           This option enables support for the Cyrix 5510/5520
 565           companion chip used with the MediaGX/Geode processor family.
 566
 567           If unsure, say N.
 568
 569 config PATA_CS5530
 570         tristate "CS5530 PATA support"
 571         depends on PCI && (X86_32 || COMPILE_TEST)
 572         help
 573           This option enables support for the Cyrix/NatSemi/AMD CS5530
 574           companion chip used with the MediaGX/Geode processor family.
 575
 576           If unsure, say N.
 577
 578 config PATA_CS5535
 579         tristate "CS5535 PATA support (Experimental)"
 580         depends on PCI && X86_32
 581         help
 582           This option enables support for the NatSemi/AMD CS5535
 583           companion chip used with the Geode processor family.
 584
 585           If unsure, say N.
 586
 587 config PATA_CS5536
 588         tristate "CS5536 PATA support"
 589         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 590         help
 591           This option enables support for the AMD CS5536
 592           companion chip used with the Geode LX processor family.
 593
 594           If unsure, say N.
 595
 596 config PATA_CYPRESS
 597         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 598         depends on PCI
 599         help
 600           This option enables support for the Cypress/Contaq CY82C693
 601           chipset found in some Alpha systems
 602
 603           If unsure, say N.
 604
 605 config PATA_EFAR
 606         tristate "EFAR SLC90E66 support"
 607         depends on PCI
 608         help
 609           This option enables support for the EFAR SLC90E66
 610           IDE controller found on some older machines.
 611
 612           If unsure, say N.
 613
 614 config PATA_EP93XX
 615         tristate "Cirrus Logic EP93xx PATA support"
 616         depends on ARCH_EP93XX
 617         help
 618           This option enables support for the PATA controller in
 619           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 620
 621           If unsure, say N.
 622
 623 config PATA_FTIDE010
 624         tristate "Faraday Technology FTIDE010 PATA support"
 625         depends on OF
 626         depends on ARM
 627         depends on SATA_GEMINI
 628         help
 629           This option enables support for the Faraday FTIDE010
 630           PATA controller found in the Cortina Gemini SoCs.
 631
 632           If unsure, say N.
 633
 634 config PATA_HPT366
 635         tristate "HPT 366/368 PATA support"
 636         depends on PCI
 637         help
 638           This option enables support for the HPT 366 and 368
 639           PATA controllers via the new ATA layer.
 640
 641           If unsure, say N.
 642
 643 config PATA_HPT37X
 644         tristate "HPT 370/370A/371/372/374/302 PATA support"
 645         depends on PCI
 646         help
 647           This option enables support for the majority of the later HPT
 648           PATA controllers via the new ATA layer.
 649
 650           If unsure, say N.
 651
 652 config PATA_HPT3X2N
 653         tristate "HPT 371N/372N/302N PATA support"
 654         depends on PCI
 655         help
 656           This option enables support for the N variant HPT PATA
 657           controllers via the new ATA layer.
 658
 659           If unsure, say N.
 660
 661 config PATA_HPT3X3
 662         tristate "HPT 343/363 PATA support"
 663         depends on PCI
 664         help
 665           This option enables support for the HPT 343/363
 666           PATA controllers via the new ATA layer
 667
 668           If unsure, say N.
 669
 670 config PATA_HPT3X3_DMA
 671         bool "HPT 343/363 DMA support"
 672         depends on PATA_HPT3X3
 673         help
 674           This option enables DMA support for the HPT343/363
 675           controllers. Enable with care as there are still some
 676           problems with DMA on this chipset.
 677
 678 config PATA_ICSIDE
 679         tristate "Acorn ICS PATA support"
 680         depends on ARM && ARCH_ACORN
 681         help
 682           On Acorn systems, say Y here if you wish to use the ICS PATA
 683           interface card.  This is not required for ICS partition support.
 684           If you are unsure, say N to this.
 685
 686 config PATA_IMX
 687         tristate "PATA support for Freescale iMX"
 688         depends on ARCH_MXC
 689         help
 690           This option enables support for the PATA host available on Freescale
 691           iMX SoCs.
 692
 693           If unsure, say N.
 694
 695 config PATA_IT8213
 696         tristate "IT8213 PATA support (Experimental)"
 697         depends on PCI
 698         help
 699           This option enables support for the ITE 821 PATA
 700           controllers via the new ATA layer.
 701
 702           If unsure, say N.
 703
 704 config PATA_IT821X
 705         tristate "IT8211/2 PATA support"
 706         depends on PCI
 707         help
 708           This option enables support for the ITE 8211 and 8212
 709           PATA controllers via the new ATA layer, including RAID
 710           mode.
 711
 712           If unsure, say N.
 713
 714 config PATA_JMICRON
 715         tristate "JMicron PATA support"
 716         depends on PCI
 717         help
 718           Enable support for the JMicron IDE controller, via the new
 719           ATA layer.
 720
 721           If unsure, say N.
 722
 723 config PATA_MACIO
 724         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 725         depends on PPC_PMAC
 726         help
 727           Most IDE capable PowerMacs have IDE busses driven by a variant
 728           of this controller which is part of the Apple chipset used on
 729           most PowerMac models. Some models have multiple busses using
 730           different chipsets, though generally, MacIO is one of them.
 731
 732 config PATA_MARVELL
 733         tristate "Marvell PATA support via legacy mode"
 734         depends on PCI
 735         help
 736           This option enables limited support for the Marvell 88SE61xx ATA
 737           controllers. If you wish to use only the SATA ports then select
 738           the AHCI driver alone. If you wish to the use the PATA port or
 739           both SATA and PATA include this driver.
 740
 741           If unsure, say N.
 742
 743 config PATA_MPC52xx
 744         tristate "Freescale MPC52xx SoC internal IDE"
 745         depends on PPC_MPC52xx && PPC_BESTCOMM
 746         select PPC_BESTCOMM_ATA
 747         help
 748           This option enables support for integrated IDE controller
 749           of the Freescale MPC52xx SoC.
 750
 751           If unsure, say N.
 752
 753 config PATA_NETCELL
 754         tristate "NETCELL Revolution RAID support"
 755         depends on PCI
 756         help
 757           This option enables support for the Netcell Revolution RAID
 758           PATA controller.
 759
 760           If unsure, say N.
 761
 762 config PATA_NINJA32
 763         tristate "Ninja32/Delkin Cardbus ATA support"
 764         depends on PCI
 765         help
 766           This option enables support for the Ninja32, Delkin and
 767           possibly other brands of Cardbus ATA adapter
 768
 769           If unsure, say N.
 770
 771 config PATA_NS87415
 772         tristate "Nat Semi NS87415 PATA support"
 773         depends on PCI
 774         help
 775           This option enables support for the National Semiconductor
 776           NS87415 PCI-IDE controller.
 777
 778           If unsure, say N.
 779
 780 config PATA_OLDPIIX
 781         tristate "Intel PATA old PIIX support"
 782         depends on PCI
 783         help
 784           This option enables support for early PIIX PATA support.
 785
 786           If unsure, say N.
 787
 788 config PATA_OPTIDMA
 789         tristate "OPTI FireStar PATA support (Very Experimental)"
 790         depends on PCI
 791         help
 792           This option enables DMA/PIO support for the later OPTi
 793           controllers found on some old motherboards and in some
 794           laptops.
 795
 796           If unsure, say N.
 797
 798 config PATA_PDC2027X
 799         tristate "Promise PATA 2027x support"
 800         depends on PCI
 801         help
 802           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 803
 804           If unsure, say N.
 805
 806 config PATA_PDC_OLD
 807         tristate "Older Promise PATA controller support"
 808         depends on PCI
 809         help
 810           This option enables support for the Promise 20246, 20262, 20263,
 811           20265 and 20267 adapters.
 812
 813           If unsure, say N.
 814
 815 config PATA_RADISYS
 816         tristate "RADISYS 82600 PATA support (Experimental)"
 817         depends on PCI
 818         help
 819           This option enables support for the RADISYS 82600
 820           PATA controllers via the new ATA layer
 821
 822           If unsure, say N.
 823
 824 config PATA_RDC
 825         tristate "RDC PATA support"
 826         depends on PCI
 827         help
 828           This option enables basic support for the later RDC PATA controllers
 829           controllers via the new ATA layer. For the RDC 1010, you need to
 830           enable the IT821X driver instead.
 831
 832           If unsure, say N.
 833
 834 config PATA_SC1200
 835         tristate "SC1200 PATA support"
 836         depends on PCI && (X86_32 || COMPILE_TEST)
 837         help
 838           This option enables support for the NatSemi/AMD SC1200 SoC
 839           companion chip used with the Geode processor family.
 840
 841           If unsure, say N.
 842
 843 config PATA_SCH
 844         tristate "Intel SCH PATA support"
 845         depends on PCI
 846         help
 847           This option enables support for Intel SCH PATA on the Intel
 848           SCH (US15W, US15L, UL11L) series host controllers.
 849
 850           If unsure, say N.
 851
 852 config PATA_SERVERWORKS
 853         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 854         depends on PCI
 855         help
 856           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 857           HT1000 PATA controllers, via the new ATA layer.
 858
 859           If unsure, say N.
 860
 861 config PATA_SIL680
 862         tristate "CMD / Silicon Image 680 PATA support"
 863         depends on PCI
 864         help
 865           This option enables support for CMD / Silicon Image 680 PATA.
 866
 867           If unsure, say N.
 868
 869 config PATA_SIS
 870         tristate "SiS PATA support"
 871         depends on PCI
 872         help
 873           This option enables support for SiS PATA controllers
 874
 875           If unsure, say N.
 876
 877 config PATA_TOSHIBA
 878         tristate "Toshiba Piccolo support (Experimental)"
 879         depends on PCI
 880         help
 881           Support for the Toshiba Piccolo controllers. Currently only the
 882           primary channel is supported by this driver.
 883
 884           If unsure, say N.
 885
 886 config PATA_TRIFLEX
 887         tristate "Compaq Triflex PATA support"
 888         depends on PCI
 889         help
 890           Enable support for the Compaq 'Triflex' IDE controller as found
 891           on many Compaq Pentium-Pro systems, via the new ATA layer.
 892
 893           If unsure, say N.
 894
 895 config PATA_VIA
 896         tristate "VIA PATA support"
 897         depends on PCI
 898         help
 899           This option enables support for the VIA PATA interfaces
 900           found on the many VIA chipsets.
 901
 902           If unsure, say N.
 903
 904 config PATA_PXA
 905         tristate "PXA DMA-capable PATA support"
 906         depends on ARCH_PXA
 907         help
 908           This option enables support for harddrive attached to PXA CPU's bus.
 909
 910           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 911                 is not capable of doing MWDMA, use pata_platform instead.
 912
 913           If unsure, say N.
 914
 915 config PATA_WINBOND
 916         tristate "Winbond SL82C105 PATA support"
 917         depends on PCI
 918         help
 919           This option enables support for SL82C105 PATA devices found in the
 920           Netwinder and some other systems
 921
 922           If unsure, say N.
 923
 924 endif # ATA_BMDMA
 925
 926 comment "PIO-only SFF controllers"
 927
 928 config PATA_AT32
 929         tristate "Atmel AVR32 PATA support (Experimental)"
 930         depends on AVR32 && PLATFORM_AT32AP
 931         help
 932           This option enables support for the IDE devices on the
 933           Atmel AT32AP platform.
 934
 935           If unsure, say N.
 936
 937 config PATA_CMD640_PCI
 938         tristate "CMD640 PCI PATA support (Experimental)"
 939         depends on PCI
 940         help
 941           This option enables support for the CMD640 PCI IDE
 942           interface chip. Only the primary channel is currently
 943           supported.
 944
 945           If unsure, say N.
 946
 947 config PATA_FALCON
 948         tristate "Atari Falcon PATA support"
 949         depends on M68K && ATARI
 950         help
 951           This option enables support for the on-board IDE
 952           interface on the Atari Falcon.
 953
 954           If unsure, say N.
 955
 956 config PATA_ISAPNP
 957         tristate "ISA Plug and Play PATA support"
 958         depends on ISAPNP
 959         help
 960           This option enables support for ISA plug & play ATA
 961           controllers such as those found on old soundcards.
 962
 963           If unsure, say N.
 964
 965 config PATA_IXP4XX_CF
 966         tristate "IXP4XX Compact Flash support"
 967         depends on ARCH_IXP4XX
 968         help
 969           This option enables support for a Compact Flash connected on
 970           the ixp4xx expansion bus. This driver had been written for
 971           Loft/Avila boards in mind but can work with others.
 972
 973           If unsure, say N.
 974
 975 config PATA_MPIIX
 976         tristate "Intel PATA MPIIX support"
 977         depends on PCI
 978         help
 979           This option enables support for MPIIX PATA support.
 980
 981           If unsure, say N.
 982
 983 config PATA_NS87410
 984         tristate "Nat Semi NS87410 PATA support"
 985         depends on PCI
 986         help
 987           This option enables support for the National Semiconductor
 988           NS87410 PCI-IDE controller.
 989
 990           If unsure, say N.
 991
 992 config PATA_OPTI
 993         tristate "OPTI621/6215 PATA support (Very Experimental)"
 994         depends on PCI
 995         help
 996           This option enables full PIO support for the early Opti ATA
 997           controllers found on some old motherboards.
 998
 999           If unsure, say N.
1000
1001 config PATA_PALMLD
1002         tristate "Palm LifeDrive PATA support"
1003         depends on MACH_PALMLD
1004         help
1005           This option enables support for Palm LifeDrive's internal ATA
1006           port via the new ATA layer.
1007
1008           If unsure, say N.
1009
1010 config PATA_PCMCIA
1011         tristate "PCMCIA PATA support"
1012         depends on PCMCIA
1013         help
1014           This option enables support for PCMCIA ATA interfaces, including
1015           compact flash card adapters via the new ATA layer.
1016
1017           If unsure, say N.
1018
1019 config PATA_PLATFORM
1020         tristate "Generic platform device PATA support"
1021         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
1022         help
1023           This option enables support for generic directly connected ATA
1024           devices commonly found on embedded systems.
1025
1026           If unsure, say N.
1027
1028 config PATA_OF_PLATFORM
1029         tristate "OpenFirmware platform device PATA support"
1030         depends on PATA_PLATFORM && OF
1031         help
1032           This option enables support for generic directly connected ATA
1033           devices commonly found on embedded systems with OpenFirmware
1034           bindings.
1035
1036           If unsure, say N.
1037
1038 config PATA_QDI
1039         tristate "QDI VLB PATA support"
1040         depends on ISA
1041         select PATA_LEGACY
1042         help
1043           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
1044
1045 config PATA_RB532
1046         tristate "RouterBoard 532 PATA CompactFlash support"
1047         depends on MIKROTIK_RB532
1048         help
1049           This option enables support for the RouterBoard 532
1050           PATA CompactFlash controller.
1051
1052           If unsure, say N.
1053
1054 config PATA_RZ1000
1055         tristate "PC Tech RZ1000 PATA support"
1056         depends on PCI
1057         help
1058           This option enables basic support for the PC Tech RZ1000/1
1059           PATA controllers via the new ATA layer
1060
1061           If unsure, say N.
1062
1063 config PATA_SAMSUNG_CF
1064         tristate "Samsung SoC PATA support"
1065         depends on SAMSUNG_DEV_IDE
1066         help
1067           This option enables basic support for Samsung's S3C/S5P board
1068           PATA controllers via the new ATA layer
1069
1070           If unsure, say N.
1071
1072 config PATA_WINBOND_VLB
1073         tristate "Winbond W83759A VLB PATA support (Experimental)"
1074         depends on ISA
1075         select PATA_LEGACY
1076         help
1077           Support for the Winbond W83759A controller on Vesa Local Bus
1078           systems.
1079
1080 comment "Generic fallback / legacy drivers"
1081
1082 config PATA_ACPI
1083         tristate "ACPI firmware driver for PATA"
1084         depends on ATA_ACPI && ATA_BMDMA
1085         help
1086           This option enables an ACPI method driver which drives
1087           motherboard PATA controller interfaces through the ACPI
1088           firmware in the BIOS. This driver can sometimes handle
1089           otherwise unsupported hardware.
1090
1091 config ATA_GENERIC
1092         tristate "Generic ATA support"
1093         depends on PCI && ATA_BMDMA
1094         help
1095           This option enables support for generic BIOS configured
1096           ATA controllers via the new ATA layer
1097
1098           If unsure, say N.
1099
1100 config PATA_LEGACY
1101         tristate "Legacy ISA PATA support (Experimental)"
1102         depends on (ISA || PCI)
1103         help
1104           This option enables support for ISA/VLB/PCI bus legacy PATA
1105           ports and allows them to be accessed via the new ATA layer.
1106
1107           If unsure, say N.
1108
1109 endif # ATA_SFF
1110 endif # ATA