2 # SATA/PATA driver configuration
5 config HAVE_PATA_PLATFORM
8 This is an internal configuration node for any machine that
9 uses pata-platform driver to enable the relevant driver in the
10 configuration structure without having to submit endless patches
11 to update the PATA_PLATFORM entry.
14 tristate "Serial ATA and Parallel ATA drivers (libata)"
17 depends on !(M32R || M68K || S390) || BROKEN
21 If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
22 any other ATA device under Linux, say Y and make sure that you know
23 the name of your ATA host adapter (the card inside your computer
24 that "speaks" the ATA protocol, also called ATA controller),
25 because you will be asked for it.
27 NOTE: ATA enables basic SCSI support; *however*,
28 'SCSI disk support', 'SCSI tape support', or
29 'SCSI CDROM support' may also be needed,
30 depending on your hardware configuration.
34 config ATA_NONSTANDARD
38 config ATA_VERBOSE_ERROR
39 bool "Verbose ATA error reporting"
42 This option adds parsing of ATA command descriptions and error bits
43 in libata kernel output, making it easier to interpret.
44 This option will enlarge the kernel by approx. 6KB. Disable it only
45 if kernel size is more important than ease of debugging.
50 bool "ATA ACPI Support"
54 This option adds support for ATA-related ACPI objects.
55 These ACPI objects add the ability to retrieve taskfiles
56 from the ACPI BIOS and write them to the disk controller.
57 These objects may be related to performance, security,
58 power management, or other areas.
59 You can disable this at kernel boot time by using the
60 option libata.noacpi=1
63 bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
64 depends on ATA_ACPI && PM
67 This option adds support for SATA Zero Power Optical Disc
68 Drive (ZPODD). It requires both the ODD and the platform
69 support, and if enabled, will automatically power on/off the
70 ODD when certain condition is satisfied. This does not impact
71 end user's experience of the ODD, only power is saved when
72 the ODD is not in use (i.e. no disc inside).
77 bool "SATA Port Multiplier support"
80 This option adds support for SATA Port Multipliers
81 (the SATA version of an ethernet hub, or SAS expander).
83 comment "Controllers with non-SFF native interface"
86 tristate "AHCI SATA support"
89 This option enables support for AHCI Serial ATA.
93 config SATA_AHCI_PLATFORM
94 tristate "Platform AHCI SATA support"
96 This option enables support for Platform AHCI Serial ATA
102 tristate "Broadcom STB AHCI SATA support"
103 depends on ARCH_BRCMSTB || BMIPS_GENERIC
105 This option enables support for the AHCI SATA3 controller found on
111 tristate "DaVinci DA850 AHCI SATA support"
112 depends on ARCH_DAVINCI_DA850
114 This option enables support for the DaVinci DA850 SoC's
120 tristate "ST AHCI SATA support"
123 This option enables support for ST AHCI SATA controller.
128 tristate "Freescale i.MX AHCI SATA support"
129 depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
131 This option enables support for the Freescale i.MX SoC's
137 tristate "CEVA AHCI SATA support"
140 This option enables support for the CEVA AHCI SATA.
141 It can be found on the Xilinx Zynq UltraScale+ MPSoC.
146 tristate "Marvell EBU AHCI SATA support"
147 depends on ARCH_MVEBU
149 This option enables support for the Marvebu EBU SoC's
155 tristate "Cavium Octeon Soc Serial ATA"
156 depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
159 This option enables support for Cavium Octeon SoC Serial ATA.
164 tristate "Allwinner sunxi AHCI SATA support"
165 depends on ARCH_SUNXI
167 This option enables support for the Allwinner sunxi SoC's
173 tristate "NVIDIA Tegra124 AHCI SATA support"
174 depends on ARCH_TEGRA
176 This option enables support for the NVIDIA Tegra124 SoC's
182 tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
185 This option enables support for APM X-Gene SoC SATA host controller.
188 tristate "Freescale QorIQ AHCI SATA support"
191 This option enables support for the Freescale QorIQ AHCI SoC's
197 tristate "Freescale 3.0Gbps SATA support"
200 This option enables support for Freescale 3.0Gbps SATA controller.
201 It can be found on MPC837x and MPC8315.
205 config SATA_AHCI_SEATTLE
206 tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
207 depends on ARCH_SEATTLE
209 This option enables support for AMD Seattle SATA host controller.
214 tristate "Initio 162x SATA support (Very Experimental)"
217 This option enables support for Initio 162x Serial ATA.
219 config SATA_ACARD_AHCI
220 tristate "ACard AHCI variant (ATP 8620)"
223 This option enables support for Acard.
228 tristate "Silicon Image 3124/3132 SATA support"
231 This option enables support for Silicon Image 3124/3132 Serial ATA.
236 bool "ATA SFF support (for legacy IDE and PATA)"
239 This option adds support for ATA controllers with SFF
240 compliant or similar programming interface.
242 SFF is the legacy IDE interface that has been around since
243 the dawn of time. Almost all PATA controllers have an
244 SFF interface. Many SATA controllers have an SFF interface
245 when configured into a legacy compatibility mode.
247 For users with exclusively modern controllers like AHCI,
248 Silicon Image 3124, or Marvell 6440, you may choose to
249 disable this unneeded SFF support.
255 comment "SFF controllers with custom DMA interface"
258 tristate "Pacific Digital ADMA support"
261 This option enables support for Pacific Digital ADMA controllers
265 config PATA_OCTEON_CF
266 tristate "OCTEON Boot Bus Compact Flash support"
267 depends on CAVIUM_OCTEON_SOC
269 This option enables a polled compact flash driver for use with
270 compact flash cards attached to the OCTEON boot bus.
275 tristate "Pacific Digital SATA QStor support"
278 This option enables support for Pacific Digital Serial ATA QStor.
283 tristate "Promise SATA SX4 support (Experimental)"
286 This option enables support for Promise Serial ATA SX4.
291 bool "ATA BMDMA support"
294 This option adds support for SFF ATA controllers with BMDMA
295 capability. BMDMA stands for bus-master DMA and is the
296 de facto DMA interface for SFF controllers.
302 comment "SATA SFF controllers with BMDMA"
305 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
308 This option enables support for ICH5/6/7/8 Serial ATA
309 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
315 tristate "DesignWare Cores SATA support"
319 This option enables support for the on-chip SATA controller of the
320 AppliedMicro processor 460EX.
324 config SATA_DWC_DEBUG
325 bool "Debugging driver version"
328 This option enables debugging output in the driver.
330 config SATA_DWC_VDEBUG
331 bool "Verbose debug output"
332 depends on SATA_DWC_DEBUG
334 This option enables the taskfile dumping and NCQ debugging.
337 tristate "Calxeda Highbank SATA support"
338 depends on ARCH_HIGHBANK || COMPILE_TEST
340 This option enables support for the Calxeda Highbank SoC's
346 tristate "Marvell SATA support"
347 depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
348 ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
351 This option enables support for the Marvell Serial ATA family.
352 Currently supports 88SX[56]0[48][01] PCI(-X) chips,
353 as well as the newer [67]042 PCI-X/PCIe and SOC devices.
358 tristate "NVIDIA SATA support"
361 This option enables support for NVIDIA Serial ATA.
366 tristate "Promise SATA TX2/TX4 support"
369 This option enables support for Promise Serial ATA TX2/TX4.
374 tristate "Renesas R-Car SATA support"
375 depends on ARCH_RENESAS || COMPILE_TEST
377 This option enables support for Renesas R-Car Serial ATA.
382 tristate "Silicon Image SATA support"
385 This option enables support for Silicon Image Serial ATA.
390 tristate "SiS 964/965/966/180 SATA support"
394 This option enables support for SiS Serial ATA on
395 SiS 964/965/966/180 and Parallel ATA on SiS 180.
396 The PATA support for SiS 180 requires additionally to
397 enable the PATA_SIS driver in the config.
401 tristate "ServerWorks Frodo / Apple K2 SATA support"
404 This option enables support for Broadcom/Serverworks/Apple K2
410 tristate "ULi Electronics SATA support"
413 This option enables support for ULi Electronics SATA.
418 tristate "VIA SATA support"
421 This option enables support for VIA Serial ATA.
426 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
429 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
433 comment "PATA SFF controllers with BMDMA"
436 tristate "ALi PATA support"
439 This option enables support for the ALi ATA interfaces
440 found on the many ALi chipsets.
445 tristate "AMD/NVidia PATA support"
448 This option enables support for the AMD and NVidia PATA
449 interfaces found on the chipsets for Athlon/Athlon64.
453 config PATA_ARASAN_CF
454 tristate "ARASAN CompactFlash PATA Controller Support"
455 depends on ARCH_SPEAR13XX || COMPILE_TEST
456 depends on DMADEVICES
459 Say Y here to support the ARASAN CompactFlash PATA controller
462 tristate "ARTOP 6210/6260 PATA support"
465 This option enables support for ARTOP PATA controllers.
470 tristate "ATI PATA support"
473 This option enables support for the ATI ATA interfaces
474 found on the many ATI chipsets.
479 tristate "ARTOP/Acard ATP867X PATA support"
482 This option enables support for ARTOP/Acard ATP867X PATA
488 tristate "Blackfin 54x ATAPI support"
489 depends on BF542 || BF548 || BF549
491 This option enables support for the built-in ATAPI controller on
492 Blackfin 54x family chips.
497 tristate "CMD64x PATA support"
500 This option enables support for the CMD64x series chips
501 except for the CMD640.
506 tristate "CS5510/5520 PATA support"
507 depends on PCI && (X86_32 || COMPILE_TEST)
509 This option enables support for the Cyrix 5510/5520
510 companion chip used with the MediaGX/Geode processor family.
515 tristate "CS5530 PATA support"
516 depends on PCI && (X86_32 || COMPILE_TEST)
518 This option enables support for the Cyrix/NatSemi/AMD CS5530
519 companion chip used with the MediaGX/Geode processor family.
524 tristate "CS5535 PATA support (Experimental)"
525 depends on PCI && X86_32
527 This option enables support for the NatSemi/AMD CS5535
528 companion chip used with the Geode processor family.
533 tristate "CS5536 PATA support"
534 depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
536 This option enables support for the AMD CS5536
537 companion chip used with the Geode LX processor family.
542 tristate "Cypress CY82C693 PATA support (Very Experimental)"
545 This option enables support for the Cypress/Contaq CY82C693
546 chipset found in some Alpha systems
551 tristate "EFAR SLC90E66 support"
554 This option enables support for the EFAR SLC90E66
555 IDE controller found on some older machines.
560 tristate "Cirrus Logic EP93xx PATA support"
561 depends on ARCH_EP93XX
563 This option enables support for the PATA controller in
564 the Cirrus Logic EP9312 and EP9315 ARM CPU.
569 tristate "HPT 366/368 PATA support"
572 This option enables support for the HPT 366 and 368
573 PATA controllers via the new ATA layer.
578 tristate "HPT 370/370A/371/372/374/302 PATA support"
581 This option enables support for the majority of the later HPT
582 PATA controllers via the new ATA layer.
587 tristate "HPT 371N/372N/302N PATA support"
590 This option enables support for the N variant HPT PATA
591 controllers via the new ATA layer.
596 tristate "HPT 343/363 PATA support"
599 This option enables support for the HPT 343/363
600 PATA controllers via the new ATA layer
604 config PATA_HPT3X3_DMA
605 bool "HPT 343/363 DMA support"
606 depends on PATA_HPT3X3
608 This option enables DMA support for the HPT343/363
609 controllers. Enable with care as there are still some
610 problems with DMA on this chipset.
613 tristate "Acorn ICS PATA support"
614 depends on ARM && ARCH_ACORN
616 On Acorn systems, say Y here if you wish to use the ICS PATA
617 interface card. This is not required for ICS partition support.
618 If you are unsure, say N to this.
621 tristate "PATA support for Freescale iMX"
624 This option enables support for the PATA host available on Freescale
630 tristate "IT8213 PATA support (Experimental)"
633 This option enables support for the ITE 821 PATA
634 controllers via the new ATA layer.
639 tristate "IT8211/2 PATA support"
642 This option enables support for the ITE 8211 and 8212
643 PATA controllers via the new ATA layer, including RAID
649 tristate "JMicron PATA support"
652 Enable support for the JMicron IDE controller, via the new
658 tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
661 Most IDE capable PowerMacs have IDE busses driven by a variant
662 of this controller which is part of the Apple chipset used on
663 most PowerMac models. Some models have multiple busses using
664 different chipsets, though generally, MacIO is one of them.
667 tristate "Marvell PATA support via legacy mode"
670 This option enables limited support for the Marvell 88SE61xx ATA
671 controllers. If you wish to use only the SATA ports then select
672 the AHCI driver alone. If you wish to the use the PATA port or
673 both SATA and PATA include this driver.
678 tristate "Freescale MPC52xx SoC internal IDE"
679 depends on PPC_MPC52xx && PPC_BESTCOMM
680 select PPC_BESTCOMM_ATA
682 This option enables support for integrated IDE controller
683 of the Freescale MPC52xx SoC.
688 tristate "NETCELL Revolution RAID support"
691 This option enables support for the Netcell Revolution RAID
697 tristate "Ninja32/Delkin Cardbus ATA support"
700 This option enables support for the Ninja32, Delkin and
701 possibly other brands of Cardbus ATA adapter
706 tristate "Nat Semi NS87415 PATA support"
709 This option enables support for the National Semiconductor
710 NS87415 PCI-IDE controller.
715 tristate "Intel PATA old PIIX support"
718 This option enables support for early PIIX PATA support.
723 tristate "OPTI FireStar PATA support (Very Experimental)"
726 This option enables DMA/PIO support for the later OPTi
727 controllers found on some old motherboards and in some
733 tristate "Promise PATA 2027x support"
736 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
741 tristate "Older Promise PATA controller support"
744 This option enables support for the Promise 20246, 20262, 20263,
745 20265 and 20267 adapters.
750 tristate "RADISYS 82600 PATA support (Experimental)"
753 This option enables support for the RADISYS 82600
754 PATA controllers via the new ATA layer
759 tristate "RDC PATA support"
762 This option enables basic support for the later RDC PATA controllers
763 controllers via the new ATA layer. For the RDC 1010, you need to
764 enable the IT821X driver instead.
769 tristate "SC1200 PATA support"
770 depends on PCI && (X86_32 || COMPILE_TEST)
772 This option enables support for the NatSemi/AMD SC1200 SoC
773 companion chip used with the Geode processor family.
778 tristate "Intel SCH PATA support"
781 This option enables support for Intel SCH PATA on the Intel
782 SCH (US15W, US15L, UL11L) series host controllers.
786 config PATA_SERVERWORKS
787 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
790 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
791 HT1000 PATA controllers, via the new ATA layer.
796 tristate "CMD / Silicon Image 680 PATA support"
799 This option enables support for CMD / Silicon Image 680 PATA.
804 tristate "SiS PATA support"
807 This option enables support for SiS PATA controllers
812 tristate "Toshiba Piccolo support (Experimental)"
815 Support for the Toshiba Piccolo controllers. Currently only the
816 primary channel is supported by this driver.
821 tristate "Compaq Triflex PATA support"
824 Enable support for the Compaq 'Triflex' IDE controller as found
825 on many Compaq Pentium-Pro systems, via the new ATA layer.
830 tristate "VIA PATA support"
833 This option enables support for the VIA PATA interfaces
834 found on the many VIA chipsets.
839 tristate "PXA DMA-capable PATA support"
842 This option enables support for harddrive attached to PXA CPU's bus.
844 NOTE: This driver utilizes PXA DMA controller, in case your hardware
845 is not capable of doing MWDMA, use pata_platform instead.
850 tristate "Winbond SL82C105 PATA support"
853 This option enables support for SL82C105 PATA devices found in the
854 Netwinder and some other systems
860 comment "PIO-only SFF controllers"
863 tristate "Atmel AVR32 PATA support (Experimental)"
864 depends on AVR32 && PLATFORM_AT32AP
866 This option enables support for the IDE devices on the
867 Atmel AT32AP platform.
872 tristate "PATA support for AT91SAM9260"
873 depends on ARM && SOC_AT91SAM9
875 This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
879 config PATA_CMD640_PCI
880 tristate "CMD640 PCI PATA support (Experimental)"
883 This option enables support for the CMD640 PCI IDE
884 interface chip. Only the primary channel is currently
890 tristate "ISA Plug and Play PATA support"
893 This option enables support for ISA plug & play ATA
894 controllers such as those found on old soundcards.
898 config PATA_IXP4XX_CF
899 tristate "IXP4XX Compact Flash support"
900 depends on ARCH_IXP4XX
902 This option enables support for a Compact Flash connected on
903 the ixp4xx expansion bus. This driver had been written for
904 Loft/Avila boards in mind but can work with others.
909 tristate "Intel PATA MPIIX support"
912 This option enables support for MPIIX PATA support.
917 tristate "Nat Semi NS87410 PATA support"
920 This option enables support for the National Semiconductor
921 NS87410 PCI-IDE controller.
926 tristate "OPTI621/6215 PATA support (Very Experimental)"
929 This option enables full PIO support for the early Opti ATA
930 controllers found on some old motherboards.
935 tristate "Palm LifeDrive PATA support"
936 depends on MACH_PALMLD
938 This option enables support for Palm LifeDrive's internal ATA
939 port via the new ATA layer.
944 tristate "PCMCIA PATA support"
947 This option enables support for PCMCIA ATA interfaces, including
948 compact flash card adapters via the new ATA layer.
953 tristate "Generic platform device PATA support"
954 depends on EXPERT || PPC || HAVE_PATA_PLATFORM
956 This option enables support for generic directly connected ATA
957 devices commonly found on embedded systems.
961 config PATA_OF_PLATFORM
962 tristate "OpenFirmware platform device PATA support"
963 depends on PATA_PLATFORM && OF
965 This option enables support for generic directly connected ATA
966 devices commonly found on embedded systems with OpenFirmware
972 tristate "QDI VLB PATA support"
976 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
979 tristate "RouterBoard 532 PATA CompactFlash support"
980 depends on MIKROTIK_RB532
982 This option enables support for the RouterBoard 532
983 PATA CompactFlash controller.
988 tristate "PC Tech RZ1000 PATA support"
991 This option enables basic support for the PC Tech RZ1000/1
992 PATA controllers via the new ATA layer
996 config PATA_SAMSUNG_CF
997 tristate "Samsung SoC PATA support"
998 depends on SAMSUNG_DEV_IDE
1000 This option enables basic support for Samsung's S3C/S5P board
1001 PATA controllers via the new ATA layer
1005 config PATA_WINBOND_VLB
1006 tristate "Winbond W83759A VLB PATA support (Experimental)"
1010 Support for the Winbond W83759A controller on Vesa Local Bus
1013 comment "Generic fallback / legacy drivers"
1016 tristate "ACPI firmware driver for PATA"
1017 depends on ATA_ACPI && ATA_BMDMA
1019 This option enables an ACPI method driver which drives
1020 motherboard PATA controller interfaces through the ACPI
1021 firmware in the BIOS. This driver can sometimes handle
1022 otherwise unsupported hardware.
1025 tristate "Generic ATA support"
1026 depends on PCI && ATA_BMDMA
1028 This option enables support for generic BIOS configured
1029 ATA controllers via the new ATA layer
1034 tristate "Legacy ISA PATA support (Experimental)"
1035 depends on (ISA || PCI)
1037 This option enables support for ISA/VLB/PCI bus legacy PATA
1038 ports and allows them to be accessed via the new ATA layer.