]> git.proxmox.com Git - mirror_ubuntu-artful-kernel.git/blob - drivers/ata/Kconfig
Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux...
[mirror_ubuntu-artful-kernel.git] / drivers / ata / Kconfig
1 #
2 # SATA/PATA driver configuration
3 #
4
5 menuconfig ATA
6 tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
7 depends on HAS_IOMEM
8 depends on BLOCK
9 depends on !(M32R || M68K) || BROKEN
10 depends on !SUN4 || BROKEN
11 select SCSI
12 ---help---
13 If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
14 any other ATA device under Linux, say Y and make sure that you know
15 the name of your ATA host adapter (the card inside your computer
16 that "speaks" the ATA protocol, also called ATA controller),
17 because you will be asked for it.
18
19 NOTE: ATA enables basic SCSI support; *however*,
20 'SCSI disk support', 'SCSI tape support', or
21 'SCSI CDROM support' may also be needed,
22 depending on your hardware configuration.
23
24 if ATA
25
26 config ATA_NONSTANDARD
27 bool
28 default n
29
30 config ATA_ACPI
31 bool
32 depends on ACPI && PCI
33 default y
34 help
35 This option adds support for ATA-related ACPI objects.
36 These ACPI objects add the ability to retrieve taskfiles
37 from the ACPI BIOS and write them to the disk controller.
38 These objects may be related to performance, security,
39 power management, or other areas.
40 You can disable this at kernel boot time by using the
41 option libata.noacpi=1
42
43 config SATA_AHCI
44 tristate "AHCI SATA support"
45 depends on PCI
46 help
47 This option enables support for AHCI Serial ATA.
48
49 If unsure, say N.
50
51 config SATA_SVW
52 tristate "ServerWorks Frodo / Apple K2 SATA support"
53 depends on PCI
54 help
55 This option enables support for Broadcom/Serverworks/Apple K2
56 SATA support.
57
58 If unsure, say N.
59
60 config ATA_PIIX
61 tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
62 depends on PCI
63 help
64 This option enables support for ICH5/6/7/8 Serial ATA
65 and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
66 host controllers.
67
68 If unsure, say N.
69
70 config SATA_MV
71 tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
72 depends on PCI && EXPERIMENTAL
73 help
74 This option enables support for the Marvell Serial ATA family.
75 Currently supports 88SX[56]0[48][01] chips.
76
77 If unsure, say N.
78
79 config SATA_NV
80 tristate "NVIDIA SATA support"
81 depends on PCI
82 help
83 This option enables support for NVIDIA Serial ATA.
84
85 If unsure, say N.
86
87 config PDC_ADMA
88 tristate "Pacific Digital ADMA support"
89 depends on PCI
90 help
91 This option enables support for Pacific Digital ADMA controllers
92
93 If unsure, say N.
94
95 config SATA_QSTOR
96 tristate "Pacific Digital SATA QStor support"
97 depends on PCI
98 help
99 This option enables support for Pacific Digital Serial ATA QStor.
100
101 If unsure, say N.
102
103 config SATA_PROMISE
104 tristate "Promise SATA TX2/TX4 support"
105 depends on PCI
106 help
107 This option enables support for Promise Serial ATA TX2/TX4.
108
109 If unsure, say N.
110
111 config SATA_SX4
112 tristate "Promise SATA SX4 support"
113 depends on PCI && EXPERIMENTAL
114 help
115 This option enables support for Promise Serial ATA SX4.
116
117 If unsure, say N.
118
119 config SATA_SIL
120 tristate "Silicon Image SATA support"
121 depends on PCI
122 help
123 This option enables support for Silicon Image Serial ATA.
124
125 If unsure, say N.
126
127 config SATA_SIL24
128 tristate "Silicon Image 3124/3132 SATA support"
129 depends on PCI
130 help
131 This option enables support for Silicon Image 3124/3132 Serial ATA.
132
133 If unsure, say N.
134
135 config SATA_SIS
136 tristate "SiS 964/965/966/180 SATA support"
137 depends on PCI
138 select PATA_SIS
139 help
140 This option enables support for SiS Serial ATA on
141 SiS 964/965/966/180 and Parallel ATA on SiS 180.
142 The PATA support for SiS 180 requires additionally to
143 enable the PATA_SIS driver in the config.
144 If unsure, say N.
145
146 config SATA_ULI
147 tristate "ULi Electronics SATA support"
148 depends on PCI
149 help
150 This option enables support for ULi Electronics SATA.
151
152 If unsure, say N.
153
154 config SATA_VIA
155 tristate "VIA SATA support"
156 depends on PCI
157 help
158 This option enables support for VIA Serial ATA.
159
160 If unsure, say N.
161
162 config SATA_VITESSE
163 tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
164 depends on PCI
165 help
166 This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
167
168 If unsure, say N.
169
170 config SATA_INIC162X
171 tristate "Initio 162x SATA support (HIGHLY EXPERIMENTAL)"
172 depends on PCI && EXPERIMENTAL
173 help
174 This option enables support for Initio 162x Serial ATA.
175
176 config PATA_ALI
177 tristate "ALi PATA support (Experimental)"
178 depends on PCI && EXPERIMENTAL
179 help
180 This option enables support for the ALi ATA interfaces
181 found on the many ALi chipsets.
182
183 If unsure, say N.
184
185 config PATA_AMD
186 tristate "AMD/NVidia PATA support"
187 depends on PCI
188 help
189 This option enables support for the AMD and NVidia PATA
190 interfaces found on the chipsets for Athlon/Athlon64.
191
192 If unsure, say N.
193
194 config PATA_ARTOP
195 tristate "ARTOP 6210/6260 PATA support (Experimental)"
196 depends on PCI && EXPERIMENTAL
197 help
198 This option enables support for ARTOP PATA controllers.
199
200 If unsure, say N.
201
202 config PATA_ATIIXP
203 tristate "ATI PATA support (Experimental)"
204 depends on PCI && EXPERIMENTAL
205 help
206 This option enables support for the ATI ATA interfaces
207 found on the many ATI chipsets.
208
209 If unsure, say N.
210
211 config PATA_CMD640_PCI
212 tristate "CMD640 PCI PATA support (Very Experimental)"
213 depends on PCI && EXPERIMENTAL
214 help
215 This option enables support for the CMD640 PCI IDE
216 interface chip. Only the primary channel is currently
217 supported.
218
219 If unsure, say N.
220
221 config PATA_CMD64X
222 tristate "CMD64x PATA support (Very Experimental)"
223 depends on PCI&& EXPERIMENTAL
224 help
225 This option enables support for the CMD64x series chips
226 except for the CMD640.
227
228 If unsure, say N.
229
230 config PATA_CS5520
231 tristate "CS5510/5520 PATA support"
232 depends on PCI
233 help
234 This option enables support for the Cyrix 5510/5520
235 companion chip used with the MediaGX/Geode processor family.
236
237 If unsure, say N.
238
239 config PATA_CS5530
240 tristate "CS5530 PATA support (Experimental)"
241 depends on PCI && EXPERIMENTAL
242 help
243 This option enables support for the Cyrix/NatSemi/AMD CS5530
244 companion chip used with the MediaGX/Geode processor family.
245
246 If unsure, say N.
247
248 config PATA_CS5535
249 tristate "CS5535 PATA support (Experimental)"
250 depends on PCI && X86 && !X86_64 && EXPERIMENTAL
251 help
252 This option enables support for the NatSemi/AMD CS5535
253 companion chip used with the Geode processor family.
254
255 If unsure, say N.
256
257 config PATA_CYPRESS
258 tristate "Cypress CY82C693 PATA support (Very Experimental)"
259 depends on PCI && EXPERIMENTAL
260 help
261 This option enables support for the Cypress/Contaq CY82C693
262 chipset found in some Alpha systems
263
264 If unsure, say N.
265
266 config PATA_EFAR
267 tristate "EFAR SLC90E66 support"
268 depends on PCI
269 help
270 This option enables support for the EFAR SLC90E66
271 IDE controller found on some older machines.
272
273 If unsure, say N.
274
275 config ATA_GENERIC
276 tristate "Generic ATA support"
277 depends on PCI
278 help
279 This option enables support for generic BIOS configured
280 ATA controllers via the new ATA layer
281
282 If unsure, say N.
283
284 config PATA_HPT366
285 tristate "HPT 366/368 PATA support (Experimental)"
286 depends on PCI && EXPERIMENTAL
287 help
288 This option enables support for the HPT 366 and 368
289 PATA controllers via the new ATA layer.
290
291 If unsure, say N.
292
293 config PATA_HPT37X
294 tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
295 depends on PCI && EXPERIMENTAL
296 help
297 This option enables support for the majority of the later HPT
298 PATA controllers via the new ATA layer.
299
300 If unsure, say N.
301
302 config PATA_HPT3X2N
303 tristate "HPT 372N/302N PATA support (Very Experimental)"
304 depends on PCI && EXPERIMENTAL
305 help
306 This option enables support for the N variant HPT PATA
307 controllers via the new ATA layer
308
309 If unsure, say N.
310
311 config PATA_HPT3X3
312 tristate "HPT 343/363 PATA support"
313 depends on PCI
314 help
315 This option enables support for the HPT 343/363
316 PATA controllers via the new ATA layer
317
318 If unsure, say N.
319
320 config PATA_HPT3X3_DMA
321 bool "HPT 343/363 DMA support (Experimental)"
322 depends on PATA_HPT3X3
323 help
324 This option enables DMA support for the HPT343/363
325 controllers. Enable with care as there are still some
326 problems with DMA on this chipset.
327
328 config PATA_ISAPNP
329 tristate "ISA Plug and Play PATA support (Experimental)"
330 depends on EXPERIMENTAL && ISAPNP
331 help
332 This option enables support for ISA plug & play ATA
333 controllers such as those found on old soundcards.
334
335 If unsure, say N.
336
337 config PATA_IT821X
338 tristate "IT8211/2 PATA support"
339 depends on PCI
340 help
341 This option enables support for the ITE 8211 and 8212
342 PATA controllers via the new ATA layer, including RAID
343 mode.
344
345 If unsure, say N.
346
347 config PATA_IT8213
348 tristate "IT8213 PATA support (Experimental)"
349 depends on PCI && EXPERIMENTAL
350 help
351 This option enables support for the ITE 821 PATA
352 controllers via the new ATA layer.
353
354 If unsure, say N.
355
356 config PATA_JMICRON
357 tristate "JMicron PATA support"
358 depends on PCI
359 help
360 Enable support for the JMicron IDE controller, via the new
361 ATA layer.
362
363 If unsure, say N.
364
365 config PATA_LEGACY
366 tristate "Legacy ISA PATA support (Experimental)"
367 depends on ISA && EXPERIMENTAL
368 help
369 This option enables support for ISA/VLB bus legacy PATA
370 ports and allows them to be accessed via the new ATA layer.
371
372 If unsure, say N.
373
374 config PATA_TRIFLEX
375 tristate "Compaq Triflex PATA support"
376 depends on PCI
377 help
378 Enable support for the Compaq 'Triflex' IDE controller as found
379 on many Compaq Pentium-Pro systems, via the new ATA layer.
380
381 If unsure, say N.
382
383 config PATA_MARVELL
384 tristate "Marvell PATA support via legacy mode"
385 depends on PCI
386 help
387 This option enables limited support for the Marvell 88SE6145 ATA
388 controller.
389
390 If unsure, say N.
391
392 config PATA_MPC52xx
393 tristate "Freescale MPC52xx SoC internal IDE"
394 depends on PPC_MPC52xx
395 help
396 This option enables support for integrated IDE controller
397 of the Freescale MPC52xx SoC.
398
399 If unsure, say N.
400
401 config PATA_MPIIX
402 tristate "Intel PATA MPIIX support"
403 depends on PCI
404 help
405 This option enables support for MPIIX PATA support.
406
407 If unsure, say N.
408
409 config PATA_OLDPIIX
410 tristate "Intel PATA old PIIX support"
411 depends on PCI
412 help
413 This option enables support for early PIIX PATA support.
414
415 If unsure, say N.
416
417 config PATA_NETCELL
418 tristate "NETCELL Revolution RAID support"
419 depends on PCI
420 help
421 This option enables support for the Netcell Revolution RAID
422 PATA controller.
423
424 If unsure, say N.
425
426 config PATA_NS87410
427 tristate "Nat Semi NS87410 PATA support (Experimental)"
428 depends on PCI && EXPERIMENTAL
429 help
430 This option enables support for the National Semiconductor
431 NS87410 PCI-IDE controller.
432
433 If unsure, say N.
434
435 config PATA_OPTI
436 tristate "OPTI621/6215 PATA support (Very Experimental)"
437 depends on PCI && EXPERIMENTAL
438 help
439 This option enables full PIO support for the early Opti ATA
440 controllers found on some old motherboards.
441
442 If unsure, say N.
443
444 config PATA_OPTIDMA
445 tristate "OPTI FireStar PATA support (Very Experimental)"
446 depends on PCI && EXPERIMENTAL
447 help
448 This option enables DMA/PIO support for the later OPTi
449 controllers found on some old motherboards and in some
450 laptops.
451
452 If unsure, say N.
453
454 config PATA_PCMCIA
455 tristate "PCMCIA PATA support"
456 depends on PCMCIA
457 help
458 This option enables support for PCMCIA ATA interfaces, including
459 compact flash card adapters via the new ATA layer.
460
461 If unsure, say N.
462
463 config PATA_PDC_OLD
464 tristate "Older Promise PATA controller support (Experimental)"
465 depends on PCI && EXPERIMENTAL
466 help
467 This option enables support for the Promise 20246, 20262, 20263,
468 20265 and 20267 adapters.
469
470 If unsure, say N.
471
472 config PATA_QDI
473 tristate "QDI VLB PATA support"
474 depends on ISA
475 help
476 Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
477
478 config PATA_RADISYS
479 tristate "RADISYS 82600 PATA support (Very Experimental)"
480 depends on PCI && EXPERIMENTAL
481 help
482 This option enables support for the RADISYS 82600
483 PATA controllers via the new ATA layer
484
485 If unsure, say N.
486
487 config PATA_RZ1000
488 tristate "PC Tech RZ1000 PATA support"
489 depends on PCI
490 help
491 This option enables basic support for the PC Tech RZ1000/1
492 PATA controllers via the new ATA layer
493
494 If unsure, say N.
495
496 config PATA_SC1200
497 tristate "SC1200 PATA support (Very Experimental)"
498 depends on PCI && EXPERIMENTAL
499 help
500 This option enables support for the NatSemi/AMD SC1200 SoC
501 companion chip used with the Geode processor family.
502
503 If unsure, say N.
504
505 config PATA_SERVERWORKS
506 tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
507 depends on PCI
508 help
509 This option enables support for the Serverworks OSB4/CSB5/CSB6 and
510 HT1000 PATA controllers, via the new ATA layer.
511
512 If unsure, say N.
513
514 config PATA_PDC2027X
515 tristate "Promise PATA 2027x support"
516 depends on PCI
517 help
518 This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
519
520 If unsure, say N.
521
522 config PATA_SIL680
523 tristate "CMD / Silicon Image 680 PATA support"
524 depends on PCI
525 help
526 This option enables support for CMD / Silicon Image 680 PATA.
527
528 If unsure, say N.
529
530 config PATA_SIS
531 tristate "SiS PATA support (Experimental)"
532 depends on PCI && EXPERIMENTAL
533 help
534 This option enables support for SiS PATA controllers
535
536 If unsure, say N.
537
538 config PATA_VIA
539 tristate "VIA PATA support"
540 depends on PCI
541 help
542 This option enables support for the VIA PATA interfaces
543 found on the many VIA chipsets.
544
545 If unsure, say N.
546
547 config PATA_WINBOND
548 tristate "Winbond SL82C105 PATA support"
549 depends on PCI
550 help
551 This option enables support for SL82C105 PATA devices found in the
552 Netwinder and some other systems
553
554 If unsure, say N.
555
556 config PATA_WINBOND_VLB
557 tristate "Winbond W83759A VLB PATA support (Experimental)"
558 depends on ISA && EXPERIMENTAL
559 help
560 Support for the Winbond W83759A controller on Vesa Local Bus
561 systems.
562
563 config PATA_PLATFORM
564 tristate "Generic platform device PATA support"
565 depends on EMBEDDED || ARCH_RPC
566 help
567 This option enables support for generic directly connected ATA
568 devices commonly found on embedded systems.
569
570 If unsure, say N.
571
572 config PATA_ICSIDE
573 tristate "Acorn ICS PATA support"
574 depends on ARM && ARCH_ACORN
575 help
576 On Acorn systems, say Y here if you wish to use the ICS PATA
577 interface card. This is not required for ICS partition support.
578 If you are unsure, say N to this.
579
580 config PATA_IXP4XX_CF
581 tristate "IXP4XX Compact Flash support"
582 depends on ARCH_IXP4XX
583 help
584 This option enables support for a Compact Flash connected on
585 the ixp4xx expansion bus. This driver had been written for
586 Loft/Avila boards in mind but can work with others.
587
588 If unsure, say N.
589
590 config PATA_SCC
591 tristate "Toshiba's Cell Reference Set IDE support"
592 depends on PCI && PPC_CELLEB
593 help
594 This option enables support for the built-in IDE controller on
595 Toshiba Cell Reference Board.
596
597 If unsure, say N.
598
599 endif # ATA