drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 menuconfig ATA
   6         tristate "Serial ATA (prod) and Parallel ATA (experimental) drivers"
   7         depends on HAS_IOMEM
   8         depends on BLOCK
   9         depends on !(M32R || M68K) || BROKEN
  10         select SCSI
  11         ---help---
  12           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  13           any other ATA device under Linux, say Y and make sure that you know
  14           the name of your ATA host adapter (the card inside your computer
  15           that "speaks" the ATA protocol, also called ATA controller),
  16           because you will be asked for it.
  17
  18           NOTE: ATA enables basic SCSI support; *however*,
  19           'SCSI disk support', 'SCSI tape support', or
  20           'SCSI CDROM support' may also be needed,
  21           depending on your hardware configuration.
  22
  23 if ATA
  24
  25 config ATA_NONSTANDARD
  26        bool
  27        default n
  28
  29 config ATA_ACPI
  30         bool "ATA ACPI Support"
  31         depends on ACPI && PCI
  32         select ACPI_DOCK
  33         default y
  34         help
  35           This option adds support for ATA-related ACPI objects.
  36           These ACPI objects add the ability to retrieve taskfiles
  37           from the ACPI BIOS and write them to the disk controller.
  38           These objects may be related to performance, security,
  39           power management, or other areas.
  40           You can disable this at kernel boot time by using the
  41           option libata.noacpi=1
  42
  43 config SATA_PMP
  44         bool "SATA Port Multiplier support"
  45         default y
  46         help
  47           This option adds support for SATA Port Multipliers
  48           (the SATA version of an ethernet hub, or SAS expander).
  49
  50 config SATA_AHCI
  51         tristate "AHCI SATA support"
  52         depends on PCI
  53         help
  54           This option enables support for AHCI Serial ATA.
  55
  56           If unsure, say N.
  57
  58 config SATA_SIL24
  59         tristate "Silicon Image 3124/3132 SATA support"
  60         depends on PCI
  61         help
  62           This option enables support for Silicon Image 3124/3132 Serial ATA.
  63
  64           If unsure, say N.
  65
  66 config SATA_FSL
  67         tristate "Freescale 3.0Gbps SATA support"
  68         depends on FSL_SOC
  69         help
  70           This option enables support for Freescale 3.0Gbps SATA controller.
  71           It can be found on MPC837x and MPC8315.
  72
  73           If unsure, say N.
  74
  75 config ATA_SFF
  76         bool "ATA SFF support"
  77         default y
  78         help
  79           This option adds support for ATA controllers with SFF
  80           compliant or similar programming interface.
  81
  82           SFF is the legacy IDE interface that has been around since
  83           the dawn of time.  Almost all PATA controllers have an
  84           SFF interface.  Many SATA controllers have an SFF interface
  85           when configured into a legacy compatibility mode.
  86
  87           For users with exclusively modern controllers like AHCI,
  88           Silicon Image 3124, or Marvell 6440, you may choose to
  89           disable this uneeded SFF support.
  90
  91           If unsure, say Y.
  92
  93 if ATA_SFF
  94
  95 config SATA_SVW
  96         tristate "ServerWorks Frodo / Apple K2 SATA support"
  97         depends on PCI
  98         help
  99           This option enables support for Broadcom/Serverworks/Apple K2
 100           SATA support.
 101
 102           If unsure, say N.
 103
 104 config ATA_PIIX
 105         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 106         depends on PCI
 107         help
 108           This option enables support for ICH5/6/7/8 Serial ATA
 109           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 110           host controllers.
 111
 112           If unsure, say N.
 113
 114 config SATA_MV
 115         tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)"
 116         depends on EXPERIMENTAL
 117         help
 118           This option enables support for the Marvell Serial ATA family.
 119           Currently supports 88SX[56]0[48][01] chips.
 120
 121           If unsure, say N.
 122
 123 config SATA_NV
 124         tristate "NVIDIA SATA support"
 125         depends on PCI
 126         help
 127           This option enables support for NVIDIA Serial ATA.
 128
 129           If unsure, say N.
 130
 131 config PDC_ADMA
 132         tristate "Pacific Digital ADMA support"
 133         depends on PCI
 134         help
 135           This option enables support for Pacific Digital ADMA controllers
 136
 137           If unsure, say N.
 138
 139 config SATA_QSTOR
 140         tristate "Pacific Digital SATA QStor support"
 141         depends on PCI
 142         help
 143           This option enables support for Pacific Digital Serial ATA QStor.
 144
 145           If unsure, say N.
 146
 147 config SATA_PROMISE
 148         tristate "Promise SATA TX2/TX4 support"
 149         depends on PCI
 150         help
 151           This option enables support for Promise Serial ATA TX2/TX4.
 152
 153           If unsure, say N.
 154
 155 config SATA_SX4
 156         tristate "Promise SATA SX4 support (Experimental)"
 157         depends on PCI && EXPERIMENTAL
 158         help
 159           This option enables support for Promise Serial ATA SX4.
 160
 161           If unsure, say N.
 162
 163 config SATA_SIL
 164         tristate "Silicon Image SATA support"
 165         depends on PCI
 166         help
 167           This option enables support for Silicon Image Serial ATA.
 168
 169           If unsure, say N.
 170
 171 config SATA_SIS
 172         tristate "SiS 964/965/966/180 SATA support"
 173         depends on PCI
 174         select PATA_SIS
 175         help
 176           This option enables support for SiS Serial ATA on
 177           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 178           The PATA support for SiS 180 requires additionally to
 179           enable the PATA_SIS driver in the config.
 180           If unsure, say N.
 181
 182 config SATA_ULI
 183         tristate "ULi Electronics SATA support"
 184         depends on PCI
 185         help
 186           This option enables support for ULi Electronics SATA.
 187
 188           If unsure, say N.
 189
 190 config SATA_VIA
 191         tristate "VIA SATA support"
 192         depends on PCI
 193         help
 194           This option enables support for VIA Serial ATA.
 195
 196           If unsure, say N.
 197
 198 config SATA_VITESSE
 199         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 200         depends on PCI
 201         help
 202           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 203
 204           If unsure, say N.
 205
 206 config SATA_INIC162X
 207         tristate "Initio 162x SATA support"
 208         depends on PCI
 209         help
 210           This option enables support for Initio 162x Serial ATA.
 211
 212 config PATA_ACPI
 213         tristate "ACPI firmware driver for PATA"
 214         depends on ATA_ACPI
 215         help
 216           This option enables an ACPI method driver which drives
 217           motherboard PATA controller interfaces through the ACPI
 218           firmware in the BIOS. This driver can sometimes handle
 219           otherwise unsupported hardware.
 220
 221 config PATA_ALI
 222         tristate "ALi PATA support"
 223         depends on PCI
 224         help
 225           This option enables support for the ALi ATA interfaces
 226           found on the many ALi chipsets.
 227
 228           If unsure, say N.
 229
 230 config PATA_AMD
 231         tristate "AMD/NVidia PATA support"
 232         depends on PCI
 233         help
 234           This option enables support for the AMD and NVidia PATA
 235           interfaces found on the chipsets for Athlon/Athlon64.
 236
 237           If unsure, say N.
 238
 239 config PATA_ARTOP
 240         tristate "ARTOP 6210/6260 PATA support"
 241         depends on PCI
 242         help
 243           This option enables support for ARTOP PATA controllers.
 244
 245           If unsure, say N.
 246
 247 config PATA_AT32
 248         tristate "Atmel AVR32 PATA support (Experimental)"
 249         depends on AVR32 && PLATFORM_AT32AP && EXPERIMENTAL
 250         help
 251           This option enables support for the IDE devices on the
 252           Atmel AT32AP platform.
 253
 254           If unsure, say N.
 255
 256 config PATA_ATIIXP
 257         tristate "ATI PATA support"
 258         depends on PCI
 259         help
 260           This option enables support for the ATI ATA interfaces
 261           found on the many ATI chipsets.
 262
 263           If unsure, say N.
 264
 265 config PATA_CMD640_PCI
 266         tristate "CMD640 PCI PATA support (Experimental)"
 267         depends on PCI && EXPERIMENTAL
 268         help
 269           This option enables support for the CMD640 PCI IDE
 270           interface chip. Only the primary channel is currently
 271           supported.
 272
 273           If unsure, say N.
 274
 275 config PATA_CMD64X
 276         tristate "CMD64x PATA support"
 277         depends on PCI
 278         help
 279           This option enables support for the CMD64x series chips
 280           except for the CMD640.
 281
 282           If unsure, say N.
 283
 284 config PATA_CS5520
 285         tristate "CS5510/5520 PATA support"
 286         depends on PCI
 287         help
 288           This option enables support for the Cyrix 5510/5520
 289           companion chip used with the MediaGX/Geode processor family.
 290
 291           If unsure, say N.
 292
 293 config PATA_CS5530
 294         tristate "CS5530 PATA support"
 295         depends on PCI
 296         help
 297           This option enables support for the Cyrix/NatSemi/AMD CS5530
 298           companion chip used with the MediaGX/Geode processor family.
 299
 300           If unsure, say N.
 301
 302 config PATA_CS5535
 303         tristate "CS5535 PATA support (Experimental)"
 304         depends on PCI && X86 && !X86_64 && EXPERIMENTAL
 305         help
 306           This option enables support for the NatSemi/AMD CS5535
 307           companion chip used with the Geode processor family.
 308
 309           If unsure, say N.
 310
 311 config PATA_CS5536
 312         tristate "CS5536 PATA support"
 313         depends on PCI && X86 && !X86_64
 314         help
 315           This option enables support for the AMD CS5536
 316           companion chip used with the Geode LX processor family.
 317
 318           If unsure, say N.
 319
 320 config PATA_CYPRESS
 321         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 322         depends on PCI && EXPERIMENTAL
 323         help
 324           This option enables support for the Cypress/Contaq CY82C693
 325           chipset found in some Alpha systems
 326
 327           If unsure, say N.
 328
 329 config PATA_EFAR
 330         tristate "EFAR SLC90E66 support"
 331         depends on PCI
 332         help
 333           This option enables support for the EFAR SLC90E66
 334           IDE controller found on some older machines.
 335
 336           If unsure, say N.
 337
 338 config ATA_GENERIC
 339         tristate "Generic ATA support"
 340         depends on PCI
 341         help
 342           This option enables support for generic BIOS configured
 343           ATA controllers via the new ATA layer
 344
 345           If unsure, say N.
 346
 347 config PATA_HPT366
 348         tristate "HPT 366/368 PATA support"
 349         depends on PCI
 350         help
 351           This option enables support for the HPT 366 and 368
 352           PATA controllers via the new ATA layer.
 353
 354           If unsure, say N.
 355
 356 config PATA_HPT37X
 357         tristate "HPT 370/370A/371/372/374/302 PATA support (Experimental)"
 358         depends on PCI && EXPERIMENTAL
 359         help
 360           This option enables support for the majority of the later HPT
 361           PATA controllers via the new ATA layer.
 362
 363           If unsure, say N.
 364
 365 config PATA_HPT3X2N
 366         tristate "HPT 372N/302N PATA support (Experimental)"
 367         depends on PCI && EXPERIMENTAL
 368         help
 369           This option enables support for the N variant HPT PATA
 370           controllers via the new ATA layer
 371
 372           If unsure, say N.
 373
 374 config PATA_HPT3X3
 375         tristate "HPT 343/363 PATA support"
 376         depends on PCI
 377         help
 378           This option enables support for the HPT 343/363
 379           PATA controllers via the new ATA layer
 380
 381           If unsure, say N.
 382
 383 config PATA_HPT3X3_DMA
 384         bool "HPT 343/363 DMA support (Experimental)"
 385         depends on PATA_HPT3X3
 386         help
 387           This option enables DMA support for the HPT343/363
 388           controllers. Enable with care as there are still some
 389           problems with DMA on this chipset.
 390
 391 config PATA_ISAPNP
 392         tristate "ISA Plug and Play PATA support"
 393         depends on ISAPNP
 394         help
 395           This option enables support for ISA plug & play ATA
 396           controllers such as those found on old soundcards.
 397
 398           If unsure, say N.
 399
 400 config PATA_IT821X
 401         tristate "IT8211/2 PATA support"
 402         depends on PCI
 403         help
 404           This option enables support for the ITE 8211 and 8212
 405           PATA controllers via the new ATA layer, including RAID
 406           mode.
 407
 408           If unsure, say N.
 409
 410 config PATA_IT8213
 411         tristate "IT8213 PATA support (Experimental)"
 412         depends on PCI && EXPERIMENTAL
 413         help
 414           This option enables support for the ITE 821 PATA
 415           controllers via the new ATA layer.
 416
 417           If unsure, say N.
 418
 419 config PATA_JMICRON
 420         tristate "JMicron PATA support"
 421         depends on PCI
 422         help
 423           Enable support for the JMicron IDE controller, via the new
 424           ATA layer.
 425
 426           If unsure, say N.
 427
 428 config PATA_LEGACY
 429         tristate "Legacy ISA PATA support (Experimental)"
 430         depends on ISA && EXPERIMENTAL
 431         help
 432           This option enables support for ISA/VLB bus legacy PATA
 433           ports and allows them to be accessed via the new ATA layer.
 434
 435           If unsure, say N.
 436
 437 config PATA_TRIFLEX
 438         tristate "Compaq Triflex PATA support"
 439         depends on PCI
 440         help
 441           Enable support for the Compaq 'Triflex' IDE controller as found
 442           on many Compaq Pentium-Pro systems, via the new ATA layer.
 443
 444           If unsure, say N.
 445
 446 config PATA_MARVELL
 447         tristate "Marvell PATA support via legacy mode"
 448         depends on PCI
 449         help
 450           This option enables limited support for the Marvell 88SE61xx ATA
 451           controllers. If you wish to use only the SATA ports then select
 452           the AHCI driver alone. If you wish to the use the PATA port or
 453           both SATA and PATA include this driver.
 454
 455           If unsure, say N.
 456
 457 config PATA_MPC52xx
 458         tristate "Freescale MPC52xx SoC internal IDE"
 459         depends on PPC_MPC52xx
 460         help
 461           This option enables support for integrated IDE controller
 462           of the Freescale MPC52xx SoC.
 463
 464           If unsure, say N.
 465
 466 config PATA_MPIIX
 467         tristate "Intel PATA MPIIX support"
 468         depends on PCI
 469         help
 470           This option enables support for MPIIX PATA support.
 471
 472           If unsure, say N.
 473
 474 config PATA_OLDPIIX
 475         tristate "Intel PATA old PIIX support"
 476         depends on PCI
 477         help
 478           This option enables support for early PIIX PATA support.
 479
 480           If unsure, say N.
 481
 482 config PATA_NETCELL
 483         tristate "NETCELL Revolution RAID support"
 484         depends on PCI
 485         help
 486           This option enables support for the Netcell Revolution RAID
 487           PATA controller.
 488
 489           If unsure, say N.
 490
 491 config PATA_NINJA32
 492         tristate "Ninja32/Delkin Cardbus ATA support (Experimental)"
 493         depends on PCI && EXPERIMENTAL
 494         help
 495           This option enables support for the Ninja32, Delkin and
 496           possibly other brands of Cardbus ATA adapter
 497
 498           If unsure, say N.
 499
 500 config PATA_NS87410
 501         tristate "Nat Semi NS87410 PATA support"
 502         depends on PCI
 503         help
 504           This option enables support for the National Semiconductor
 505           NS87410 PCI-IDE controller.
 506
 507           If unsure, say N.
 508
 509 config PATA_NS87415
 510         tristate "Nat Semi NS87415 PATA support"
 511         depends on PCI
 512         help
 513           This option enables support for the National Semiconductor
 514           NS87415 PCI-IDE controller.
 515
 516           If unsure, say N.
 517
 518 config PATA_OPTI
 519         tristate "OPTI621/6215 PATA support (Very Experimental)"
 520         depends on PCI && EXPERIMENTAL
 521         help
 522           This option enables full PIO support for the early Opti ATA
 523           controllers found on some old motherboards.
 524
 525           If unsure, say N.
 526
 527 config PATA_OPTIDMA
 528         tristate "OPTI FireStar PATA support (Very Experimental)"
 529         depends on PCI && EXPERIMENTAL
 530         help
 531           This option enables DMA/PIO support for the later OPTi
 532           controllers found on some old motherboards and in some
 533           laptops.
 534
 535           If unsure, say N.
 536
 537 config PATA_PCMCIA
 538         tristate "PCMCIA PATA support"
 539         depends on PCMCIA
 540         help
 541           This option enables support for PCMCIA ATA interfaces, including
 542           compact flash card adapters via the new ATA layer.
 543
 544           If unsure, say N.
 545
 546 config PATA_PDC_OLD
 547         tristate "Older Promise PATA controller support"
 548         depends on PCI
 549         help
 550           This option enables support for the Promise 20246, 20262, 20263,
 551           20265 and 20267 adapters.
 552
 553           If unsure, say N.
 554
 555 config PATA_QDI
 556         tristate "QDI VLB PATA support"
 557         depends on ISA
 558         help
 559           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 560
 561 config PATA_RADISYS
 562         tristate "RADISYS 82600 PATA support (Experimental)"
 563         depends on PCI && EXPERIMENTAL
 564         help
 565           This option enables support for the RADISYS 82600
 566           PATA controllers via the new ATA layer
 567
 568           If unsure, say N.
 569
 570 config PATA_RB532
 571         tristate "RouterBoard 532 PATA CompactFlash support"
 572         depends on MIKROTIK_RB532
 573         help
 574           This option enables support for the RouterBoard 532
 575           PATA CompactFlash controller.
 576
 577           If unsure, say N.
 578
 579 config PATA_RZ1000
 580         tristate "PC Tech RZ1000 PATA support"
 581         depends on PCI
 582         help
 583           This option enables basic support for the PC Tech RZ1000/1
 584           PATA controllers via the new ATA layer
 585
 586           If unsure, say N.
 587
 588 config PATA_SC1200
 589         tristate "SC1200 PATA support"
 590         depends on PCI
 591         help
 592           This option enables support for the NatSemi/AMD SC1200 SoC
 593           companion chip used with the Geode processor family.
 594
 595           If unsure, say N.
 596
 597 config PATA_SERVERWORKS
 598         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 599         depends on PCI
 600         help
 601           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 602           HT1000 PATA controllers, via the new ATA layer.
 603
 604           If unsure, say N.
 605
 606 config PATA_PDC2027X
 607         tristate "Promise PATA 2027x support"
 608         depends on PCI
 609         help
 610           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 611
 612           If unsure, say N.
 613
 614 config PATA_SIL680
 615         tristate "CMD / Silicon Image 680 PATA support"
 616         depends on PCI
 617         help
 618           This option enables support for CMD / Silicon Image 680 PATA.
 619
 620           If unsure, say N.
 621
 622 config PATA_SIS
 623         tristate "SiS PATA support"
 624         depends on PCI
 625         help
 626           This option enables support for SiS PATA controllers
 627
 628           If unsure, say N.
 629
 630 config PATA_VIA
 631         tristate "VIA PATA support"
 632         depends on PCI
 633         help
 634           This option enables support for the VIA PATA interfaces
 635           found on the many VIA chipsets.
 636
 637           If unsure, say N.
 638
 639 config PATA_WINBOND
 640         tristate "Winbond SL82C105 PATA support"
 641         depends on PCI
 642         help
 643           This option enables support for SL82C105 PATA devices found in the
 644           Netwinder and some other systems
 645
 646           If unsure, say N.
 647
 648 config PATA_WINBOND_VLB
 649         tristate "Winbond W83759A VLB PATA support (Experimental)"
 650         depends on ISA && EXPERIMENTAL
 651         help
 652           Support for the Winbond W83759A controller on Vesa Local Bus
 653           systems.
 654
 655 config HAVE_PATA_PLATFORM
 656         bool
 657         help
 658           This is an internal configuration node for any machine that
 659           uses pata-platform driver to enable the relevant driver in the
 660           configuration structure without having to submit endless patches
 661           to update the PATA_PLATFORM entry.
 662
 663 config PATA_PLATFORM
 664         tristate "Generic platform device PATA support"
 665         depends on EMBEDDED || PPC || HAVE_PATA_PLATFORM
 666         help
 667           This option enables support for generic directly connected ATA
 668           devices commonly found on embedded systems.
 669
 670           If unsure, say N.
 671
 672 config PATA_OF_PLATFORM
 673         tristate "OpenFirmware platform device PATA support"
 674         depends on PATA_PLATFORM && PPC_OF
 675         help
 676           This option enables support for generic directly connected ATA
 677           devices commonly found on embedded systems with OpenFirmware
 678           bindings.
 679
 680           If unsure, say N.
 681
 682 config PATA_ICSIDE
 683         tristate "Acorn ICS PATA support"
 684         depends on ARM && ARCH_ACORN
 685         help
 686           On Acorn systems, say Y here if you wish to use the ICS PATA
 687           interface card.  This is not required for ICS partition support.
 688           If you are unsure, say N to this.
 689
 690 config PATA_IXP4XX_CF
 691         tristate "IXP4XX Compact Flash support"
 692         depends on ARCH_IXP4XX
 693         help
 694           This option enables support for a Compact Flash connected on
 695           the ixp4xx expansion bus. This driver had been written for
 696           Loft/Avila boards in mind but can work with others.
 697
 698           If unsure, say N.
 699
 700 config PATA_SCC
 701         tristate "Toshiba's Cell Reference Set IDE support"
 702         depends on PCI && PPC_CELLEB
 703         help
 704           This option enables support for the built-in IDE controller on
 705           Toshiba Cell Reference Board.
 706
 707           If unsure, say N.
 708
 709 config PATA_SCH
 710         tristate "Intel SCH PATA support"
 711         depends on PCI
 712         help
 713           This option enables support for Intel SCH PATA on the Intel
 714           SCH (US15W, US15L, UL11L) series host controllers.
 715
 716           If unsure, say N.
 717
 718 config PATA_BF54X
 719         tristate "Blackfin 54x ATAPI support"
 720         depends on BF542 || BF548 || BF549
 721         help
 722           This option enables support for the built-in ATAPI controller on
 723           Blackfin 54x family chips.
 724
 725           If unsure, say N.
 726
 727 endif # ATA_SFF
 728 endif # ATA