drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_BRCM
 102         tristate "Broadcom AHCI SATA support"
 103         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
 104         help
 105           This option enables support for the AHCI SATA3 controller found on
 106           Broadcom SoC's.
 107
 108           If unsure, say N.
 109
 110 config AHCI_DA850
 111         tristate "DaVinci DA850 AHCI SATA support"
 112         depends on ARCH_DAVINCI_DA850
 113         help
 114           This option enables support for the DaVinci DA850 SoC's
 115           onboard AHCI SATA.
 116
 117           If unsure, say N.
 118
 119 config AHCI_ST
 120         tristate "ST AHCI SATA support"
 121         depends on ARCH_STI
 122         help
 123           This option enables support for ST AHCI SATA controller.
 124
 125           If unsure, say N.
 126
 127 config AHCI_IMX
 128         tristate "Freescale i.MX AHCI SATA support"
 129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 130         help
 131           This option enables support for the Freescale i.MX SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_CEVA
 137         tristate "CEVA AHCI SATA support"
 138         depends on OF
 139         help
 140           This option enables support for the CEVA AHCI SATA.
 141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 142
 143           If unsure, say N.
 144
 145 config AHCI_MVEBU
 146         tristate "Marvell EBU AHCI SATA support"
 147         depends on ARCH_MVEBU
 148         help
 149           This option enables support for the Marvebu EBU SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_OCTEON
 155         tristate "Cavium Octeon Soc Serial ATA"
 156         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 157         default y
 158         help
 159           This option enables support for Cavium Octeon SoC Serial ATA.
 160
 161           If unsure, say N.
 162
 163 config AHCI_SUNXI
 164         tristate "Allwinner sunxi AHCI SATA support"
 165         depends on ARCH_SUNXI
 166         help
 167           This option enables support for the Allwinner sunxi SoC's
 168           onboard AHCI SATA.
 169
 170           If unsure, say N.
 171
 172 config AHCI_TEGRA
 173         tristate "NVIDIA Tegra124 AHCI SATA support"
 174         depends on ARCH_TEGRA
 175         help
 176           This option enables support for the NVIDIA Tegra124 SoC's
 177           onboard AHCI SATA.
 178
 179           If unsure, say N.
 180
 181 config AHCI_XGENE
 182         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 183         depends on PHY_XGENE
 184         help
 185          This option enables support for APM X-Gene SoC SATA host controller.
 186
 187 config AHCI_QORIQ
 188         tristate "Freescale QorIQ AHCI SATA support"
 189         depends on OF
 190         help
 191           This option enables support for the Freescale QorIQ AHCI SoC's
 192           onboard AHCI SATA.
 193
 194           If unsure, say N.
 195
 196 config SATA_FSL
 197         tristate "Freescale 3.0Gbps SATA support"
 198         depends on FSL_SOC
 199         help
 200           This option enables support for Freescale 3.0Gbps SATA controller.
 201           It can be found on MPC837x and MPC8315.
 202
 203           If unsure, say N.
 204
 205 config SATA_AHCI_SEATTLE
 206         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 207         depends on ARCH_SEATTLE
 208         help
 209          This option enables support for AMD Seattle SATA host controller.
 210
 211          If unsure, say N
 212
 213 config SATA_INIC162X
 214         tristate "Initio 162x SATA support (Very Experimental)"
 215         depends on PCI
 216         help
 217           This option enables support for Initio 162x Serial ATA.
 218
 219 config SATA_ACARD_AHCI
 220         tristate "ACard AHCI variant (ATP 8620)"
 221         depends on PCI
 222         help
 223           This option enables support for Acard.
 224
 225           If unsure, say N.
 226
 227 config SATA_SIL24
 228         tristate "Silicon Image 3124/3132 SATA support"
 229         depends on PCI
 230         help
 231           This option enables support for Silicon Image 3124/3132 Serial ATA.
 232
 233           If unsure, say N.
 234
 235 config ATA_SFF
 236         bool "ATA SFF support (for legacy IDE and PATA)"
 237         default y
 238         help
 239           This option adds support for ATA controllers with SFF
 240           compliant or similar programming interface.
 241
 242           SFF is the legacy IDE interface that has been around since
 243           the dawn of time.  Almost all PATA controllers have an
 244           SFF interface.  Many SATA controllers have an SFF interface
 245           when configured into a legacy compatibility mode.
 246
 247           For users with exclusively modern controllers like AHCI,
 248           Silicon Image 3124, or Marvell 6440, you may choose to
 249           disable this unneeded SFF support.
 250
 251           If unsure, say Y.
 252
 253 if ATA_SFF
 254
 255 comment "SFF controllers with custom DMA interface"
 256
 257 config PDC_ADMA
 258         tristate "Pacific Digital ADMA support"
 259         depends on PCI
 260         help
 261           This option enables support for Pacific Digital ADMA controllers
 262
 263           If unsure, say N.
 264
 265 config PATA_OCTEON_CF
 266         tristate "OCTEON Boot Bus Compact Flash support"
 267         depends on CAVIUM_OCTEON_SOC
 268         help
 269           This option enables a polled compact flash driver for use with
 270           compact flash cards attached to the OCTEON boot bus.
 271
 272           If unsure, say N.
 273
 274 config SATA_QSTOR
 275         tristate "Pacific Digital SATA QStor support"
 276         depends on PCI
 277         help
 278           This option enables support for Pacific Digital Serial ATA QStor.
 279
 280           If unsure, say N.
 281
 282 config SATA_SX4
 283         tristate "Promise SATA SX4 support (Experimental)"
 284         depends on PCI
 285         help
 286           This option enables support for Promise Serial ATA SX4.
 287
 288           If unsure, say N.
 289
 290 config ATA_BMDMA
 291         bool "ATA BMDMA support"
 292         default y
 293         help
 294           This option adds support for SFF ATA controllers with BMDMA
 295           capability.  BMDMA stands for bus-master DMA and is the
 296           de facto DMA interface for SFF controllers.
 297
 298           If unsure, say Y.
 299
 300 if ATA_BMDMA
 301
 302 comment "SATA SFF controllers with BMDMA"
 303
 304 config ATA_PIIX
 305         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 306         depends on PCI
 307         help
 308           This option enables support for ICH5/6/7/8 Serial ATA
 309           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 310           host controllers.
 311
 312           If unsure, say N.
 313
 314 config SATA_DWC
 315         tristate "DesignWare Cores SATA support"
 316         depends on DMADEVICES
 317         select GENERIC_PHY
 318         help
 319           This option enables support for the on-chip SATA controller of the
 320           AppliedMicro processor 460EX.
 321
 322           If unsure, say N.
 323
 324 config SATA_DWC_OLD_DMA
 325         bool "Support old device trees"
 326         depends on SATA_DWC
 327         select DW_DMAC_CORE
 328         default y if 460EX
 329         help
 330           This option enables support for old device trees without the
 331           "dmas" property.
 332
 333 config SATA_DWC_DEBUG
 334         bool "Debugging driver version"
 335         depends on SATA_DWC
 336         help
 337           This option enables debugging output in the driver.
 338
 339 config SATA_DWC_VDEBUG
 340         bool "Verbose debug output"
 341         depends on SATA_DWC_DEBUG
 342         help
 343           This option enables the taskfile dumping and NCQ debugging.
 344
 345 config SATA_HIGHBANK
 346         tristate "Calxeda Highbank SATA support"
 347         depends on ARCH_HIGHBANK || COMPILE_TEST
 348         help
 349           This option enables support for the Calxeda Highbank SoC's
 350           onboard SATA.
 351
 352           If unsure, say N.
 353
 354 config SATA_MV
 355         tristate "Marvell SATA support"
 356         depends on HAS_DMA
 357         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 358                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 359         select GENERIC_PHY
 360         help
 361           This option enables support for the Marvell Serial ATA family.
 362           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 363           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 364
 365           If unsure, say N.
 366
 367 config SATA_NV
 368         tristate "NVIDIA SATA support"
 369         depends on PCI
 370         help
 371           This option enables support for NVIDIA Serial ATA.
 372
 373           If unsure, say N.
 374
 375 config SATA_PROMISE
 376         tristate "Promise SATA TX2/TX4 support"
 377         depends on PCI
 378         help
 379           This option enables support for Promise Serial ATA TX2/TX4.
 380
 381           If unsure, say N.
 382
 383 config SATA_RCAR
 384         tristate "Renesas R-Car SATA support"
 385         depends on ARCH_RENESAS || COMPILE_TEST
 386         help
 387           This option enables support for Renesas R-Car Serial ATA.
 388
 389           If unsure, say N.
 390
 391 config SATA_SIL
 392         tristate "Silicon Image SATA support"
 393         depends on PCI
 394         help
 395           This option enables support for Silicon Image Serial ATA.
 396
 397           If unsure, say N.
 398
 399 config SATA_SIS
 400         tristate "SiS 964/965/966/180 SATA support"
 401         depends on PCI
 402         select PATA_SIS
 403         help
 404           This option enables support for SiS Serial ATA on
 405           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 406           The PATA support for SiS 180 requires additionally to
 407           enable the PATA_SIS driver in the config.
 408           If unsure, say N.
 409
 410 config SATA_SVW
 411         tristate "ServerWorks Frodo / Apple K2 SATA support"
 412         depends on PCI
 413         help
 414           This option enables support for Broadcom/Serverworks/Apple K2
 415           SATA support.
 416
 417           If unsure, say N.
 418
 419 config SATA_ULI
 420         tristate "ULi Electronics SATA support"
 421         depends on PCI
 422         help
 423           This option enables support for ULi Electronics SATA.
 424
 425           If unsure, say N.
 426
 427 config SATA_VIA
 428         tristate "VIA SATA support"
 429         depends on PCI
 430         help
 431           This option enables support for VIA Serial ATA.
 432
 433           If unsure, say N.
 434
 435 config SATA_VITESSE
 436         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 437         depends on PCI
 438         help
 439           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 440
 441           If unsure, say N.
 442
 443 comment "PATA SFF controllers with BMDMA"
 444
 445 config PATA_ALI
 446         tristate "ALi PATA support"
 447         depends on PCI
 448         help
 449           This option enables support for the ALi ATA interfaces
 450           found on the many ALi chipsets.
 451
 452           If unsure, say N.
 453
 454 config PATA_AMD
 455         tristate "AMD/NVidia PATA support"
 456         depends on PCI
 457         help
 458           This option enables support for the AMD and NVidia PATA
 459           interfaces found on the chipsets for Athlon/Athlon64.
 460
 461           If unsure, say N.
 462
 463 config PATA_ARASAN_CF
 464         tristate "ARASAN CompactFlash PATA Controller Support"
 465         depends on ARCH_SPEAR13XX || COMPILE_TEST
 466         depends on DMADEVICES
 467         select DMA_ENGINE
 468         help
 469           Say Y here to support the ARASAN CompactFlash PATA controller
 470
 471 config PATA_ARTOP
 472         tristate "ARTOP 6210/6260 PATA support"
 473         depends on PCI
 474         help
 475           This option enables support for ARTOP PATA controllers.
 476
 477           If unsure, say N.
 478
 479 config PATA_ATIIXP
 480         tristate "ATI PATA support"
 481         depends on PCI
 482         help
 483           This option enables support for the ATI ATA interfaces
 484           found on the many ATI chipsets.
 485
 486           If unsure, say N.
 487
 488 config PATA_ATP867X
 489         tristate "ARTOP/Acard ATP867X PATA support"
 490         depends on PCI
 491         help
 492           This option enables support for ARTOP/Acard ATP867X PATA
 493           controllers.
 494
 495           If unsure, say N.
 496
 497 config PATA_BF54X
 498         tristate "Blackfin 54x ATAPI support"
 499         depends on BF542 || BF548 || BF549
 500         help
 501           This option enables support for the built-in ATAPI controller on
 502           Blackfin 54x family chips.
 503
 504           If unsure, say N.
 505
 506 config PATA_CMD64X
 507         tristate "CMD64x PATA support"
 508         depends on PCI
 509         help
 510           This option enables support for the CMD64x series chips
 511           except for the CMD640.
 512
 513           If unsure, say N.
 514
 515 config PATA_CS5520
 516         tristate "CS5510/5520 PATA support"
 517         depends on PCI && (X86_32 || COMPILE_TEST)
 518         help
 519           This option enables support for the Cyrix 5510/5520
 520           companion chip used with the MediaGX/Geode processor family.
 521
 522           If unsure, say N.
 523
 524 config PATA_CS5530
 525         tristate "CS5530 PATA support"
 526         depends on PCI && (X86_32 || COMPILE_TEST)
 527         help
 528           This option enables support for the Cyrix/NatSemi/AMD CS5530
 529           companion chip used with the MediaGX/Geode processor family.
 530
 531           If unsure, say N.
 532
 533 config PATA_CS5535
 534         tristate "CS5535 PATA support (Experimental)"
 535         depends on PCI && X86_32
 536         help
 537           This option enables support for the NatSemi/AMD CS5535
 538           companion chip used with the Geode processor family.
 539
 540           If unsure, say N.
 541
 542 config PATA_CS5536
 543         tristate "CS5536 PATA support"
 544         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 545         help
 546           This option enables support for the AMD CS5536
 547           companion chip used with the Geode LX processor family.
 548
 549           If unsure, say N.
 550
 551 config PATA_CYPRESS
 552         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 553         depends on PCI
 554         help
 555           This option enables support for the Cypress/Contaq CY82C693
 556           chipset found in some Alpha systems
 557
 558           If unsure, say N.
 559
 560 config PATA_EFAR
 561         tristate "EFAR SLC90E66 support"
 562         depends on PCI
 563         help
 564           This option enables support for the EFAR SLC90E66
 565           IDE controller found on some older machines.
 566
 567           If unsure, say N.
 568
 569 config PATA_EP93XX
 570         tristate "Cirrus Logic EP93xx PATA support"
 571         depends on ARCH_EP93XX
 572         help
 573           This option enables support for the PATA controller in
 574           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 575
 576           If unsure, say N.
 577
 578 config PATA_HPT366
 579         tristate "HPT 366/368 PATA support"
 580         depends on PCI
 581         help
 582           This option enables support for the HPT 366 and 368
 583           PATA controllers via the new ATA layer.
 584
 585           If unsure, say N.
 586
 587 config PATA_HPT37X
 588         tristate "HPT 370/370A/371/372/374/302 PATA support"
 589         depends on PCI
 590         help
 591           This option enables support for the majority of the later HPT
 592           PATA controllers via the new ATA layer.
 593
 594           If unsure, say N.
 595
 596 config PATA_HPT3X2N
 597         tristate "HPT 371N/372N/302N PATA support"
 598         depends on PCI
 599         help
 600           This option enables support for the N variant HPT PATA
 601           controllers via the new ATA layer.
 602
 603           If unsure, say N.
 604
 605 config PATA_HPT3X3
 606         tristate "HPT 343/363 PATA support"
 607         depends on PCI
 608         help
 609           This option enables support for the HPT 343/363
 610           PATA controllers via the new ATA layer
 611
 612           If unsure, say N.
 613
 614 config PATA_HPT3X3_DMA
 615         bool "HPT 343/363 DMA support"
 616         depends on PATA_HPT3X3
 617         help
 618           This option enables DMA support for the HPT343/363
 619           controllers. Enable with care as there are still some
 620           problems with DMA on this chipset.
 621
 622 config PATA_ICSIDE
 623         tristate "Acorn ICS PATA support"
 624         depends on ARM && ARCH_ACORN
 625         help
 626           On Acorn systems, say Y here if you wish to use the ICS PATA
 627           interface card.  This is not required for ICS partition support.
 628           If you are unsure, say N to this.
 629
 630 config PATA_IMX
 631         tristate "PATA support for Freescale iMX"
 632         depends on ARCH_MXC
 633         help
 634           This option enables support for the PATA host available on Freescale
 635           iMX SoCs.
 636
 637           If unsure, say N.
 638
 639 config PATA_IT8213
 640         tristate "IT8213 PATA support (Experimental)"
 641         depends on PCI
 642         help
 643           This option enables support for the ITE 821 PATA
 644           controllers via the new ATA layer.
 645
 646           If unsure, say N.
 647
 648 config PATA_IT821X
 649         tristate "IT8211/2 PATA support"
 650         depends on PCI
 651         help
 652           This option enables support for the ITE 8211 and 8212
 653           PATA controllers via the new ATA layer, including RAID
 654           mode.
 655
 656           If unsure, say N.
 657
 658 config PATA_JMICRON
 659         tristate "JMicron PATA support"
 660         depends on PCI
 661         help
 662           Enable support for the JMicron IDE controller, via the new
 663           ATA layer.
 664
 665           If unsure, say N.
 666
 667 config PATA_MACIO
 668         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 669         depends on PPC_PMAC
 670         help
 671           Most IDE capable PowerMacs have IDE busses driven by a variant
 672           of this controller which is part of the Apple chipset used on
 673           most PowerMac models. Some models have multiple busses using
 674           different chipsets, though generally, MacIO is one of them.
 675
 676 config PATA_MARVELL
 677         tristate "Marvell PATA support via legacy mode"
 678         depends on PCI
 679         help
 680           This option enables limited support for the Marvell 88SE61xx ATA
 681           controllers. If you wish to use only the SATA ports then select
 682           the AHCI driver alone. If you wish to the use the PATA port or
 683           both SATA and PATA include this driver.
 684
 685           If unsure, say N.
 686
 687 config PATA_MPC52xx
 688         tristate "Freescale MPC52xx SoC internal IDE"
 689         depends on PPC_MPC52xx && PPC_BESTCOMM
 690         select PPC_BESTCOMM_ATA
 691         help
 692           This option enables support for integrated IDE controller
 693           of the Freescale MPC52xx SoC.
 694
 695           If unsure, say N.
 696
 697 config PATA_NETCELL
 698         tristate "NETCELL Revolution RAID support"
 699         depends on PCI
 700         help
 701           This option enables support for the Netcell Revolution RAID
 702           PATA controller.
 703
 704           If unsure, say N.
 705
 706 config PATA_NINJA32
 707         tristate "Ninja32/Delkin Cardbus ATA support"
 708         depends on PCI
 709         help
 710           This option enables support for the Ninja32, Delkin and
 711           possibly other brands of Cardbus ATA adapter
 712
 713           If unsure, say N.
 714
 715 config PATA_NS87415
 716         tristate "Nat Semi NS87415 PATA support"
 717         depends on PCI
 718         help
 719           This option enables support for the National Semiconductor
 720           NS87415 PCI-IDE controller.
 721
 722           If unsure, say N.
 723
 724 config PATA_OLDPIIX
 725         tristate "Intel PATA old PIIX support"
 726         depends on PCI
 727         help
 728           This option enables support for early PIIX PATA support.
 729
 730           If unsure, say N.
 731
 732 config PATA_OPTIDMA
 733         tristate "OPTI FireStar PATA support (Very Experimental)"
 734         depends on PCI
 735         help
 736           This option enables DMA/PIO support for the later OPTi
 737           controllers found on some old motherboards and in some
 738           laptops.
 739
 740           If unsure, say N.
 741
 742 config PATA_PDC2027X
 743         tristate "Promise PATA 2027x support"
 744         depends on PCI
 745         help
 746           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 747
 748           If unsure, say N.
 749
 750 config PATA_PDC_OLD
 751         tristate "Older Promise PATA controller support"
 752         depends on PCI
 753         help
 754           This option enables support for the Promise 20246, 20262, 20263,
 755           20265 and 20267 adapters.
 756
 757           If unsure, say N.
 758
 759 config PATA_RADISYS
 760         tristate "RADISYS 82600 PATA support (Experimental)"
 761         depends on PCI
 762         help
 763           This option enables support for the RADISYS 82600
 764           PATA controllers via the new ATA layer
 765
 766           If unsure, say N.
 767
 768 config PATA_RDC
 769         tristate "RDC PATA support"
 770         depends on PCI
 771         help
 772           This option enables basic support for the later RDC PATA controllers
 773           controllers via the new ATA layer. For the RDC 1010, you need to
 774           enable the IT821X driver instead.
 775
 776           If unsure, say N.
 777
 778 config PATA_SC1200
 779         tristate "SC1200 PATA support"
 780         depends on PCI && (X86_32 || COMPILE_TEST)
 781         help
 782           This option enables support for the NatSemi/AMD SC1200 SoC
 783           companion chip used with the Geode processor family.
 784
 785           If unsure, say N.
 786
 787 config PATA_SCH
 788         tristate "Intel SCH PATA support"
 789         depends on PCI
 790         help
 791           This option enables support for Intel SCH PATA on the Intel
 792           SCH (US15W, US15L, UL11L) series host controllers.
 793
 794           If unsure, say N.
 795
 796 config PATA_SERVERWORKS
 797         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 798         depends on PCI
 799         help
 800           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 801           HT1000 PATA controllers, via the new ATA layer.
 802
 803           If unsure, say N.
 804
 805 config PATA_SIL680
 806         tristate "CMD / Silicon Image 680 PATA support"
 807         depends on PCI
 808         help
 809           This option enables support for CMD / Silicon Image 680 PATA.
 810
 811           If unsure, say N.
 812
 813 config PATA_SIS
 814         tristate "SiS PATA support"
 815         depends on PCI
 816         help
 817           This option enables support for SiS PATA controllers
 818
 819           If unsure, say N.
 820
 821 config PATA_TOSHIBA
 822         tristate "Toshiba Piccolo support (Experimental)"
 823         depends on PCI
 824         help
 825           Support for the Toshiba Piccolo controllers. Currently only the
 826           primary channel is supported by this driver.
 827
 828           If unsure, say N.
 829
 830 config PATA_TRIFLEX
 831         tristate "Compaq Triflex PATA support"
 832         depends on PCI
 833         help
 834           Enable support for the Compaq 'Triflex' IDE controller as found
 835           on many Compaq Pentium-Pro systems, via the new ATA layer.
 836
 837           If unsure, say N.
 838
 839 config PATA_VIA
 840         tristate "VIA PATA support"
 841         depends on PCI
 842         help
 843           This option enables support for the VIA PATA interfaces
 844           found on the many VIA chipsets.
 845
 846           If unsure, say N.
 847
 848 config PATA_PXA
 849         tristate "PXA DMA-capable PATA support"
 850         depends on ARCH_PXA
 851         help
 852           This option enables support for harddrive attached to PXA CPU's bus.
 853
 854           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 855                 is not capable of doing MWDMA, use pata_platform instead.
 856
 857           If unsure, say N.
 858
 859 config PATA_WINBOND
 860         tristate "Winbond SL82C105 PATA support"
 861         depends on PCI
 862         help
 863           This option enables support for SL82C105 PATA devices found in the
 864           Netwinder and some other systems
 865
 866           If unsure, say N.
 867
 868 endif # ATA_BMDMA
 869
 870 comment "PIO-only SFF controllers"
 871
 872 config PATA_AT32
 873         tristate "Atmel AVR32 PATA support (Experimental)"
 874         depends on AVR32 && PLATFORM_AT32AP
 875         help
 876           This option enables support for the IDE devices on the
 877           Atmel AT32AP platform.
 878
 879           If unsure, say N.
 880
 881 config PATA_AT91
 882         tristate "PATA support for AT91SAM9260"
 883         depends on ARM && SOC_AT91SAM9
 884         help
 885           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 886
 887           If unsure, say N.
 888
 889 config PATA_CMD640_PCI
 890         tristate "CMD640 PCI PATA support (Experimental)"
 891         depends on PCI
 892         help
 893           This option enables support for the CMD640 PCI IDE
 894           interface chip. Only the primary channel is currently
 895           supported.
 896
 897           If unsure, say N.
 898
 899 config PATA_ISAPNP
 900         tristate "ISA Plug and Play PATA support"
 901         depends on ISAPNP
 902         help
 903           This option enables support for ISA plug & play ATA
 904           controllers such as those found on old soundcards.
 905
 906           If unsure, say N.
 907
 908 config PATA_IXP4XX_CF
 909         tristate "IXP4XX Compact Flash support"
 910         depends on ARCH_IXP4XX
 911         help
 912           This option enables support for a Compact Flash connected on
 913           the ixp4xx expansion bus. This driver had been written for
 914           Loft/Avila boards in mind but can work with others.
 915
 916           If unsure, say N.
 917
 918 config PATA_MPIIX
 919         tristate "Intel PATA MPIIX support"
 920         depends on PCI
 921         help
 922           This option enables support for MPIIX PATA support.
 923
 924           If unsure, say N.
 925
 926 config PATA_NS87410
 927         tristate "Nat Semi NS87410 PATA support"
 928         depends on PCI
 929         help
 930           This option enables support for the National Semiconductor
 931           NS87410 PCI-IDE controller.
 932
 933           If unsure, say N.
 934
 935 config PATA_OPTI
 936         tristate "OPTI621/6215 PATA support (Very Experimental)"
 937         depends on PCI
 938         help
 939           This option enables full PIO support for the early Opti ATA
 940           controllers found on some old motherboards.
 941
 942           If unsure, say N.
 943
 944 config PATA_PALMLD
 945         tristate "Palm LifeDrive PATA support"
 946         depends on MACH_PALMLD
 947         help
 948           This option enables support for Palm LifeDrive's internal ATA
 949           port via the new ATA layer.
 950
 951           If unsure, say N.
 952
 953 config PATA_PCMCIA
 954         tristate "PCMCIA PATA support"
 955         depends on PCMCIA
 956         help
 957           This option enables support for PCMCIA ATA interfaces, including
 958           compact flash card adapters via the new ATA layer.
 959
 960           If unsure, say N.
 961
 962 config PATA_PLATFORM
 963         tristate "Generic platform device PATA support"
 964         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 965         help
 966           This option enables support for generic directly connected ATA
 967           devices commonly found on embedded systems.
 968
 969           If unsure, say N.
 970
 971 config PATA_OF_PLATFORM
 972         tristate "OpenFirmware platform device PATA support"
 973         depends on PATA_PLATFORM && OF
 974         help
 975           This option enables support for generic directly connected ATA
 976           devices commonly found on embedded systems with OpenFirmware
 977           bindings.
 978
 979           If unsure, say N.
 980
 981 config PATA_QDI
 982         tristate "QDI VLB PATA support"
 983         depends on ISA
 984         select PATA_LEGACY
 985         help
 986           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 987
 988 config PATA_RB532
 989         tristate "RouterBoard 532 PATA CompactFlash support"
 990         depends on MIKROTIK_RB532
 991         help
 992           This option enables support for the RouterBoard 532
 993           PATA CompactFlash controller.
 994
 995           If unsure, say N.
 996
 997 config PATA_RZ1000
 998         tristate "PC Tech RZ1000 PATA support"
 999         depends on PCI
1000         help
1001           This option enables basic support for the PC Tech RZ1000/1
1002           PATA controllers via the new ATA layer
1003
1004           If unsure, say N.
1005
1006 config PATA_SAMSUNG_CF
1007         tristate "Samsung SoC PATA support"
1008         depends on SAMSUNG_DEV_IDE
1009         help
1010           This option enables basic support for Samsung's S3C/S5P board
1011           PATA controllers via the new ATA layer
1012
1013           If unsure, say N.
1014
1015 config PATA_WINBOND_VLB
1016         tristate "Winbond W83759A VLB PATA support (Experimental)"
1017         depends on ISA
1018         select PATA_LEGACY
1019         help
1020           Support for the Winbond W83759A controller on Vesa Local Bus
1021           systems.
1022
1023 comment "Generic fallback / legacy drivers"
1024
1025 config PATA_ACPI
1026         tristate "ACPI firmware driver for PATA"
1027         depends on ATA_ACPI && ATA_BMDMA
1028         help
1029           This option enables an ACPI method driver which drives
1030           motherboard PATA controller interfaces through the ACPI
1031           firmware in the BIOS. This driver can sometimes handle
1032           otherwise unsupported hardware.
1033
1034 config ATA_GENERIC
1035         tristate "Generic ATA support"
1036         depends on PCI && ATA_BMDMA
1037         help
1038           This option enables support for generic BIOS configured
1039           ATA controllers via the new ATA layer
1040
1041           If unsure, say N.
1042
1043 config PATA_LEGACY
1044         tristate "Legacy ISA PATA support (Experimental)"
1045         depends on (ISA || PCI)
1046         help
1047           This option enables support for ISA/VLB/PCI bus legacy PATA
1048           ports and allows them to be accessed via the new ATA layer.
1049
1050           If unsure, say N.
1051
1052 endif # ATA_SFF
1053 endif # ATA