drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         select GLOB
  20         ---help---
  21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  22           any other ATA device under Linux, say Y and make sure that you know
  23           the name of your ATA host adapter (the card inside your computer
  24           that "speaks" the ATA protocol, also called ATA controller),
  25           because you will be asked for it.
  26
  27           NOTE: ATA enables basic SCSI support; *however*,
  28           'SCSI disk support', 'SCSI tape support', or
  29           'SCSI CDROM support' may also be needed,
  30           depending on your hardware configuration.
  31
  32 if ATA
  33
  34 config ATA_NONSTANDARD
  35        bool
  36        default n
  37
  38 config ATA_VERBOSE_ERROR
  39         bool "Verbose ATA error reporting"
  40         default y
  41         help
  42           This option adds parsing of ATA command descriptions and error bits
  43           in libata kernel output, making it easier to interpret.
  44           This option will enlarge the kernel by approx. 6KB. Disable it only
  45           if kernel size is more important than ease of debugging.
  46
  47           If unsure, say Y.
  48
  49 config ATA_ACPI
  50         bool "ATA ACPI Support"
  51         depends on ACPI
  52         default y
  53         help
  54           This option adds support for ATA-related ACPI objects.
  55           These ACPI objects add the ability to retrieve taskfiles
  56           from the ACPI BIOS and write them to the disk controller.
  57           These objects may be related to performance, security,
  58           power management, or other areas.
  59           You can disable this at kernel boot time by using the
  60           option libata.noacpi=1
  61
  62 config SATA_ZPODD
  63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  64         depends on ATA_ACPI && PM
  65         default n
  66         help
  67           This option adds support for SATA Zero Power Optical Disc
  68           Drive (ZPODD). It requires both the ODD and the platform
  69           support, and if enabled, will automatically power on/off the
  70           ODD when certain condition is satisfied. This does not impact
  71           end user's experience of the ODD, only power is saved when
  72           the ODD is not in use (i.e. no disc inside).
  73
  74           If unsure, say N.
  75
  76 config SATA_PMP
  77         bool "SATA Port Multiplier support"
  78         default y
  79         help
  80           This option adds support for SATA Port Multipliers
  81           (the SATA version of an ethernet hub, or SAS expander).
  82
  83 comment "Controllers with non-SFF native interface"
  84
  85 config SATA_AHCI
  86         tristate "AHCI SATA support"
  87         depends on PCI
  88         help
  89           This option enables support for AHCI Serial ATA.
  90
  91           If unsure, say N.
  92
  93 config SATA_AHCI_PLATFORM
  94         tristate "Platform AHCI SATA support"
  95         help
  96           This option enables support for Platform AHCI Serial ATA
  97           controllers.
  98
  99           If unsure, say N.
 100
 101 config AHCI_BRCM
 102         tristate "Broadcom AHCI SATA support"
 103         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
 104         help
 105           This option enables support for the AHCI SATA3 controller found on
 106           Broadcom SoC's.
 107
 108           If unsure, say N.
 109
 110 config AHCI_DA850
 111         tristate "DaVinci DA850 AHCI SATA support"
 112         depends on ARCH_DAVINCI_DA850
 113         help
 114           This option enables support for the DaVinci DA850 SoC's
 115           onboard AHCI SATA.
 116
 117           If unsure, say N.
 118
 119 config AHCI_ST
 120         tristate "ST AHCI SATA support"
 121         depends on ARCH_STI
 122         help
 123           This option enables support for ST AHCI SATA controller.
 124
 125           If unsure, say N.
 126
 127 config AHCI_IMX
 128         tristate "Freescale i.MX AHCI SATA support"
 129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
 130         help
 131           This option enables support for the Freescale i.MX SoC's
 132           onboard AHCI SATA.
 133
 134           If unsure, say N.
 135
 136 config AHCI_CEVA
 137         tristate "CEVA AHCI SATA support"
 138         depends on OF
 139         help
 140           This option enables support for the CEVA AHCI SATA.
 141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
 142
 143           If unsure, say N.
 144
 145 config AHCI_MVEBU
 146         tristate "Marvell EBU AHCI SATA support"
 147         depends on ARCH_MVEBU
 148         help
 149           This option enables support for the Marvebu EBU SoC's
 150           onboard AHCI SATA.
 151
 152           If unsure, say N.
 153
 154 config AHCI_OCTEON
 155         tristate "Cavium Octeon Soc Serial ATA"
 156         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
 157         default y
 158         help
 159           This option enables support for Cavium Octeon SoC Serial ATA.
 160
 161           If unsure, say N.
 162
 163 config AHCI_SUNXI
 164         tristate "Allwinner sunxi AHCI SATA support"
 165         depends on ARCH_SUNXI
 166         help
 167           This option enables support for the Allwinner sunxi SoC's
 168           onboard AHCI SATA.
 169
 170           If unsure, say N.
 171
 172 config AHCI_TEGRA
 173         tristate "NVIDIA Tegra124 AHCI SATA support"
 174         depends on ARCH_TEGRA
 175         help
 176           This option enables support for the NVIDIA Tegra124 SoC's
 177           onboard AHCI SATA.
 178
 179           If unsure, say N.
 180
 181 config AHCI_XGENE
 182         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 183         depends on PHY_XGENE
 184         help
 185          This option enables support for APM X-Gene SoC SATA host controller.
 186
 187 config AHCI_QORIQ
 188         tristate "Freescale QorIQ AHCI SATA support"
 189         depends on OF
 190         help
 191           This option enables support for the Freescale QorIQ AHCI SoC's
 192           onboard AHCI SATA.
 193
 194           If unsure, say N.
 195
 196 config SATA_FSL
 197         tristate "Freescale 3.0Gbps SATA support"
 198         depends on FSL_SOC
 199         help
 200           This option enables support for Freescale 3.0Gbps SATA controller.
 201           It can be found on MPC837x and MPC8315.
 202
 203           If unsure, say N.
 204
 205 config SATA_AHCI_SEATTLE
 206         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
 207         depends on ARCH_SEATTLE
 208         help
 209          This option enables support for AMD Seattle SATA host controller.
 210
 211          If unsure, say N
 212
 213 config SATA_INIC162X
 214         tristate "Initio 162x SATA support (Very Experimental)"
 215         depends on PCI
 216         help
 217           This option enables support for Initio 162x Serial ATA.
 218
 219 config SATA_ACARD_AHCI
 220         tristate "ACard AHCI variant (ATP 8620)"
 221         depends on PCI
 222         help
 223           This option enables support for Acard.
 224
 225           If unsure, say N.
 226
 227 config SATA_SIL24
 228         tristate "Silicon Image 3124/3132 SATA support"
 229         depends on PCI
 230         help
 231           This option enables support for Silicon Image 3124/3132 Serial ATA.
 232
 233           If unsure, say N.
 234
 235 config ATA_SFF
 236         bool "ATA SFF support (for legacy IDE and PATA)"
 237         default y
 238         help
 239           This option adds support for ATA controllers with SFF
 240           compliant or similar programming interface.
 241
 242           SFF is the legacy IDE interface that has been around since
 243           the dawn of time.  Almost all PATA controllers have an
 244           SFF interface.  Many SATA controllers have an SFF interface
 245           when configured into a legacy compatibility mode.
 246
 247           For users with exclusively modern controllers like AHCI,
 248           Silicon Image 3124, or Marvell 6440, you may choose to
 249           disable this unneeded SFF support.
 250
 251           If unsure, say Y.
 252
 253 if ATA_SFF
 254
 255 comment "SFF controllers with custom DMA interface"
 256
 257 config PDC_ADMA
 258         tristate "Pacific Digital ADMA support"
 259         depends on PCI
 260         help
 261           This option enables support for Pacific Digital ADMA controllers
 262
 263           If unsure, say N.
 264
 265 config PATA_OCTEON_CF
 266         tristate "OCTEON Boot Bus Compact Flash support"
 267         depends on CAVIUM_OCTEON_SOC
 268         help
 269           This option enables a polled compact flash driver for use with
 270           compact flash cards attached to the OCTEON boot bus.
 271
 272           If unsure, say N.
 273
 274 config SATA_QSTOR
 275         tristate "Pacific Digital SATA QStor support"
 276         depends on PCI
 277         help
 278           This option enables support for Pacific Digital Serial ATA QStor.
 279
 280           If unsure, say N.
 281
 282 config SATA_SX4
 283         tristate "Promise SATA SX4 support (Experimental)"
 284         depends on PCI
 285         help
 286           This option enables support for Promise Serial ATA SX4.
 287
 288           If unsure, say N.
 289
 290 config ATA_BMDMA
 291         bool "ATA BMDMA support"
 292         default y
 293         help
 294           This option adds support for SFF ATA controllers with BMDMA
 295           capability.  BMDMA stands for bus-master DMA and is the
 296           de facto DMA interface for SFF controllers.
 297
 298           If unsure, say Y.
 299
 300 if ATA_BMDMA
 301
 302 comment "SATA SFF controllers with BMDMA"
 303
 304 config ATA_PIIX
 305         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 306         depends on PCI
 307         help
 308           This option enables support for ICH5/6/7/8 Serial ATA
 309           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 310           host controllers.
 311
 312           If unsure, say N.
 313
 314 config SATA_DWC
 315         tristate "DesignWare Cores SATA support"
 316         depends on DMADEVICES
 317         select GENERIC_PHY
 318         help
 319           This option enables support for the on-chip SATA controller of the
 320           AppliedMicro processor 460EX.
 321
 322           If unsure, say N.
 323
 324 config SATA_DWC_OLD_DMA
 325         bool "Support old device trees"
 326         depends on SATA_DWC
 327         select DW_DMAC_CORE
 328         default y if 460EX
 329         help
 330           This option enables support for old device trees without the
 331           "dmas" property.
 332
 333 config SATA_DWC_DEBUG
 334         bool "Debugging driver version"
 335         depends on SATA_DWC
 336         help
 337           This option enables debugging output in the driver.
 338
 339 config SATA_DWC_VDEBUG
 340         bool "Verbose debug output"
 341         depends on SATA_DWC_DEBUG
 342         help
 343           This option enables the taskfile dumping and NCQ debugging.
 344
 345 config SATA_HIGHBANK
 346         tristate "Calxeda Highbank SATA support"
 347         depends on ARCH_HIGHBANK || COMPILE_TEST
 348         help
 349           This option enables support for the Calxeda Highbank SoC's
 350           onboard SATA.
 351
 352           If unsure, say N.
 353
 354 config SATA_MV
 355         tristate "Marvell SATA support"
 356         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
 357                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 358         select GENERIC_PHY
 359         help
 360           This option enables support for the Marvell Serial ATA family.
 361           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 362           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 363
 364           If unsure, say N.
 365
 366 config SATA_NV
 367         tristate "NVIDIA SATA support"
 368         depends on PCI
 369         help
 370           This option enables support for NVIDIA Serial ATA.
 371
 372           If unsure, say N.
 373
 374 config SATA_PROMISE
 375         tristate "Promise SATA TX2/TX4 support"
 376         depends on PCI
 377         help
 378           This option enables support for Promise Serial ATA TX2/TX4.
 379
 380           If unsure, say N.
 381
 382 config SATA_RCAR
 383         tristate "Renesas R-Car SATA support"
 384         depends on ARCH_RENESAS || COMPILE_TEST
 385         help
 386           This option enables support for Renesas R-Car Serial ATA.
 387
 388           If unsure, say N.
 389
 390 config SATA_SIL
 391         tristate "Silicon Image SATA support"
 392         depends on PCI
 393         help
 394           This option enables support for Silicon Image Serial ATA.
 395
 396           If unsure, say N.
 397
 398 config SATA_SIS
 399         tristate "SiS 964/965/966/180 SATA support"
 400         depends on PCI
 401         select PATA_SIS
 402         help
 403           This option enables support for SiS Serial ATA on
 404           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 405           The PATA support for SiS 180 requires additionally to
 406           enable the PATA_SIS driver in the config.
 407           If unsure, say N.
 408
 409 config SATA_SVW
 410         tristate "ServerWorks Frodo / Apple K2 SATA support"
 411         depends on PCI
 412         help
 413           This option enables support for Broadcom/Serverworks/Apple K2
 414           SATA support.
 415
 416           If unsure, say N.
 417
 418 config SATA_ULI
 419         tristate "ULi Electronics SATA support"
 420         depends on PCI
 421         help
 422           This option enables support for ULi Electronics SATA.
 423
 424           If unsure, say N.
 425
 426 config SATA_VIA
 427         tristate "VIA SATA support"
 428         depends on PCI
 429         help
 430           This option enables support for VIA Serial ATA.
 431
 432           If unsure, say N.
 433
 434 config SATA_VITESSE
 435         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 436         depends on PCI
 437         help
 438           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 439
 440           If unsure, say N.
 441
 442 comment "PATA SFF controllers with BMDMA"
 443
 444 config PATA_ALI
 445         tristate "ALi PATA support"
 446         depends on PCI
 447         help
 448           This option enables support for the ALi ATA interfaces
 449           found on the many ALi chipsets.
 450
 451           If unsure, say N.
 452
 453 config PATA_AMD
 454         tristate "AMD/NVidia PATA support"
 455         depends on PCI
 456         help
 457           This option enables support for the AMD and NVidia PATA
 458           interfaces found on the chipsets for Athlon/Athlon64.
 459
 460           If unsure, say N.
 461
 462 config PATA_ARASAN_CF
 463         tristate "ARASAN CompactFlash PATA Controller Support"
 464         depends on ARCH_SPEAR13XX || COMPILE_TEST
 465         depends on DMADEVICES
 466         select DMA_ENGINE
 467         help
 468           Say Y here to support the ARASAN CompactFlash PATA controller
 469
 470 config PATA_ARTOP
 471         tristate "ARTOP 6210/6260 PATA support"
 472         depends on PCI
 473         help
 474           This option enables support for ARTOP PATA controllers.
 475
 476           If unsure, say N.
 477
 478 config PATA_ATIIXP
 479         tristate "ATI PATA support"
 480         depends on PCI
 481         help
 482           This option enables support for the ATI ATA interfaces
 483           found on the many ATI chipsets.
 484
 485           If unsure, say N.
 486
 487 config PATA_ATP867X
 488         tristate "ARTOP/Acard ATP867X PATA support"
 489         depends on PCI
 490         help
 491           This option enables support for ARTOP/Acard ATP867X PATA
 492           controllers.
 493
 494           If unsure, say N.
 495
 496 config PATA_BF54X
 497         tristate "Blackfin 54x ATAPI support"
 498         depends on BF542 || BF548 || BF549
 499         help
 500           This option enables support for the built-in ATAPI controller on
 501           Blackfin 54x family chips.
 502
 503           If unsure, say N.
 504
 505 config PATA_CMD64X
 506         tristate "CMD64x PATA support"
 507         depends on PCI
 508         help
 509           This option enables support for the CMD64x series chips
 510           except for the CMD640.
 511
 512           If unsure, say N.
 513
 514 config PATA_CS5520
 515         tristate "CS5510/5520 PATA support"
 516         depends on PCI && (X86_32 || COMPILE_TEST)
 517         help
 518           This option enables support for the Cyrix 5510/5520
 519           companion chip used with the MediaGX/Geode processor family.
 520
 521           If unsure, say N.
 522
 523 config PATA_CS5530
 524         tristate "CS5530 PATA support"
 525         depends on PCI && (X86_32 || COMPILE_TEST)
 526         help
 527           This option enables support for the Cyrix/NatSemi/AMD CS5530
 528           companion chip used with the MediaGX/Geode processor family.
 529
 530           If unsure, say N.
 531
 532 config PATA_CS5535
 533         tristate "CS5535 PATA support (Experimental)"
 534         depends on PCI && X86_32
 535         help
 536           This option enables support for the NatSemi/AMD CS5535
 537           companion chip used with the Geode processor family.
 538
 539           If unsure, say N.
 540
 541 config PATA_CS5536
 542         tristate "CS5536 PATA support"
 543         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 544         help
 545           This option enables support for the AMD CS5536
 546           companion chip used with the Geode LX processor family.
 547
 548           If unsure, say N.
 549
 550 config PATA_CYPRESS
 551         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 552         depends on PCI
 553         help
 554           This option enables support for the Cypress/Contaq CY82C693
 555           chipset found in some Alpha systems
 556
 557           If unsure, say N.
 558
 559 config PATA_EFAR
 560         tristate "EFAR SLC90E66 support"
 561         depends on PCI
 562         help
 563           This option enables support for the EFAR SLC90E66
 564           IDE controller found on some older machines.
 565
 566           If unsure, say N.
 567
 568 config PATA_EP93XX
 569         tristate "Cirrus Logic EP93xx PATA support"
 570         depends on ARCH_EP93XX
 571         help
 572           This option enables support for the PATA controller in
 573           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 574
 575           If unsure, say N.
 576
 577 config PATA_HPT366
 578         tristate "HPT 366/368 PATA support"
 579         depends on PCI
 580         help
 581           This option enables support for the HPT 366 and 368
 582           PATA controllers via the new ATA layer.
 583
 584           If unsure, say N.
 585
 586 config PATA_HPT37X
 587         tristate "HPT 370/370A/371/372/374/302 PATA support"
 588         depends on PCI
 589         help
 590           This option enables support for the majority of the later HPT
 591           PATA controllers via the new ATA layer.
 592
 593           If unsure, say N.
 594
 595 config PATA_HPT3X2N
 596         tristate "HPT 371N/372N/302N PATA support"
 597         depends on PCI
 598         help
 599           This option enables support for the N variant HPT PATA
 600           controllers via the new ATA layer.
 601
 602           If unsure, say N.
 603
 604 config PATA_HPT3X3
 605         tristate "HPT 343/363 PATA support"
 606         depends on PCI
 607         help
 608           This option enables support for the HPT 343/363
 609           PATA controllers via the new ATA layer
 610
 611           If unsure, say N.
 612
 613 config PATA_HPT3X3_DMA
 614         bool "HPT 343/363 DMA support"
 615         depends on PATA_HPT3X3
 616         help
 617           This option enables DMA support for the HPT343/363
 618           controllers. Enable with care as there are still some
 619           problems with DMA on this chipset.
 620
 621 config PATA_ICSIDE
 622         tristate "Acorn ICS PATA support"
 623         depends on ARM && ARCH_ACORN
 624         help
 625           On Acorn systems, say Y here if you wish to use the ICS PATA
 626           interface card.  This is not required for ICS partition support.
 627           If you are unsure, say N to this.
 628
 629 config PATA_IMX
 630         tristate "PATA support for Freescale iMX"
 631         depends on ARCH_MXC
 632         help
 633           This option enables support for the PATA host available on Freescale
 634           iMX SoCs.
 635
 636           If unsure, say N.
 637
 638 config PATA_IT8213
 639         tristate "IT8213 PATA support (Experimental)"
 640         depends on PCI
 641         help
 642           This option enables support for the ITE 821 PATA
 643           controllers via the new ATA layer.
 644
 645           If unsure, say N.
 646
 647 config PATA_IT821X
 648         tristate "IT8211/2 PATA support"
 649         depends on PCI
 650         help
 651           This option enables support for the ITE 8211 and 8212
 652           PATA controllers via the new ATA layer, including RAID
 653           mode.
 654
 655           If unsure, say N.
 656
 657 config PATA_JMICRON
 658         tristate "JMicron PATA support"
 659         depends on PCI
 660         help
 661           Enable support for the JMicron IDE controller, via the new
 662           ATA layer.
 663
 664           If unsure, say N.
 665
 666 config PATA_MACIO
 667         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 668         depends on PPC_PMAC
 669         help
 670           Most IDE capable PowerMacs have IDE busses driven by a variant
 671           of this controller which is part of the Apple chipset used on
 672           most PowerMac models. Some models have multiple busses using
 673           different chipsets, though generally, MacIO is one of them.
 674
 675 config PATA_MARVELL
 676         tristate "Marvell PATA support via legacy mode"
 677         depends on PCI
 678         help
 679           This option enables limited support for the Marvell 88SE61xx ATA
 680           controllers. If you wish to use only the SATA ports then select
 681           the AHCI driver alone. If you wish to the use the PATA port or
 682           both SATA and PATA include this driver.
 683
 684           If unsure, say N.
 685
 686 config PATA_MPC52xx
 687         tristate "Freescale MPC52xx SoC internal IDE"
 688         depends on PPC_MPC52xx && PPC_BESTCOMM
 689         select PPC_BESTCOMM_ATA
 690         help
 691           This option enables support for integrated IDE controller
 692           of the Freescale MPC52xx SoC.
 693
 694           If unsure, say N.
 695
 696 config PATA_NETCELL
 697         tristate "NETCELL Revolution RAID support"
 698         depends on PCI
 699         help
 700           This option enables support for the Netcell Revolution RAID
 701           PATA controller.
 702
 703           If unsure, say N.
 704
 705 config PATA_NINJA32
 706         tristate "Ninja32/Delkin Cardbus ATA support"
 707         depends on PCI
 708         help
 709           This option enables support for the Ninja32, Delkin and
 710           possibly other brands of Cardbus ATA adapter
 711
 712           If unsure, say N.
 713
 714 config PATA_NS87415
 715         tristate "Nat Semi NS87415 PATA support"
 716         depends on PCI
 717         help
 718           This option enables support for the National Semiconductor
 719           NS87415 PCI-IDE controller.
 720
 721           If unsure, say N.
 722
 723 config PATA_OLDPIIX
 724         tristate "Intel PATA old PIIX support"
 725         depends on PCI
 726         help
 727           This option enables support for early PIIX PATA support.
 728
 729           If unsure, say N.
 730
 731 config PATA_OPTIDMA
 732         tristate "OPTI FireStar PATA support (Very Experimental)"
 733         depends on PCI
 734         help
 735           This option enables DMA/PIO support for the later OPTi
 736           controllers found on some old motherboards and in some
 737           laptops.
 738
 739           If unsure, say N.
 740
 741 config PATA_PDC2027X
 742         tristate "Promise PATA 2027x support"
 743         depends on PCI
 744         help
 745           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 746
 747           If unsure, say N.
 748
 749 config PATA_PDC_OLD
 750         tristate "Older Promise PATA controller support"
 751         depends on PCI
 752         help
 753           This option enables support for the Promise 20246, 20262, 20263,
 754           20265 and 20267 adapters.
 755
 756           If unsure, say N.
 757
 758 config PATA_RADISYS
 759         tristate "RADISYS 82600 PATA support (Experimental)"
 760         depends on PCI
 761         help
 762           This option enables support for the RADISYS 82600
 763           PATA controllers via the new ATA layer
 764
 765           If unsure, say N.
 766
 767 config PATA_RDC
 768         tristate "RDC PATA support"
 769         depends on PCI
 770         help
 771           This option enables basic support for the later RDC PATA controllers
 772           controllers via the new ATA layer. For the RDC 1010, you need to
 773           enable the IT821X driver instead.
 774
 775           If unsure, say N.
 776
 777 config PATA_SC1200
 778         tristate "SC1200 PATA support"
 779         depends on PCI && (X86_32 || COMPILE_TEST)
 780         help
 781           This option enables support for the NatSemi/AMD SC1200 SoC
 782           companion chip used with the Geode processor family.
 783
 784           If unsure, say N.
 785
 786 config PATA_SCH
 787         tristate "Intel SCH PATA support"
 788         depends on PCI
 789         help
 790           This option enables support for Intel SCH PATA on the Intel
 791           SCH (US15W, US15L, UL11L) series host controllers.
 792
 793           If unsure, say N.
 794
 795 config PATA_SERVERWORKS
 796         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 797         depends on PCI
 798         help
 799           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 800           HT1000 PATA controllers, via the new ATA layer.
 801
 802           If unsure, say N.
 803
 804 config PATA_SIL680
 805         tristate "CMD / Silicon Image 680 PATA support"
 806         depends on PCI
 807         help
 808           This option enables support for CMD / Silicon Image 680 PATA.
 809
 810           If unsure, say N.
 811
 812 config PATA_SIS
 813         tristate "SiS PATA support"
 814         depends on PCI
 815         help
 816           This option enables support for SiS PATA controllers
 817
 818           If unsure, say N.
 819
 820 config PATA_TOSHIBA
 821         tristate "Toshiba Piccolo support (Experimental)"
 822         depends on PCI
 823         help
 824           Support for the Toshiba Piccolo controllers. Currently only the
 825           primary channel is supported by this driver.
 826
 827           If unsure, say N.
 828
 829 config PATA_TRIFLEX
 830         tristate "Compaq Triflex PATA support"
 831         depends on PCI
 832         help
 833           Enable support for the Compaq 'Triflex' IDE controller as found
 834           on many Compaq Pentium-Pro systems, via the new ATA layer.
 835
 836           If unsure, say N.
 837
 838 config PATA_VIA
 839         tristate "VIA PATA support"
 840         depends on PCI
 841         help
 842           This option enables support for the VIA PATA interfaces
 843           found on the many VIA chipsets.
 844
 845           If unsure, say N.
 846
 847 config PATA_PXA
 848         tristate "PXA DMA-capable PATA support"
 849         depends on ARCH_PXA
 850         help
 851           This option enables support for harddrive attached to PXA CPU's bus.
 852
 853           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 854                 is not capable of doing MWDMA, use pata_platform instead.
 855
 856           If unsure, say N.
 857
 858 config PATA_WINBOND
 859         tristate "Winbond SL82C105 PATA support"
 860         depends on PCI
 861         help
 862           This option enables support for SL82C105 PATA devices found in the
 863           Netwinder and some other systems
 864
 865           If unsure, say N.
 866
 867 endif # ATA_BMDMA
 868
 869 comment "PIO-only SFF controllers"
 870
 871 config PATA_AT32
 872         tristate "Atmel AVR32 PATA support (Experimental)"
 873         depends on AVR32 && PLATFORM_AT32AP
 874         help
 875           This option enables support for the IDE devices on the
 876           Atmel AT32AP platform.
 877
 878           If unsure, say N.
 879
 880 config PATA_AT91
 881         tristate "PATA support for AT91SAM9260"
 882         depends on ARM && SOC_AT91SAM9
 883         help
 884           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 885
 886           If unsure, say N.
 887
 888 config PATA_CMD640_PCI
 889         tristate "CMD640 PCI PATA support (Experimental)"
 890         depends on PCI
 891         help
 892           This option enables support for the CMD640 PCI IDE
 893           interface chip. Only the primary channel is currently
 894           supported.
 895
 896           If unsure, say N.
 897
 898 config PATA_ISAPNP
 899         tristate "ISA Plug and Play PATA support"
 900         depends on ISAPNP
 901         help
 902           This option enables support for ISA plug & play ATA
 903           controllers such as those found on old soundcards.
 904
 905           If unsure, say N.
 906
 907 config PATA_IXP4XX_CF
 908         tristate "IXP4XX Compact Flash support"
 909         depends on ARCH_IXP4XX
 910         help
 911           This option enables support for a Compact Flash connected on
 912           the ixp4xx expansion bus. This driver had been written for
 913           Loft/Avila boards in mind but can work with others.
 914
 915           If unsure, say N.
 916
 917 config PATA_MPIIX
 918         tristate "Intel PATA MPIIX support"
 919         depends on PCI
 920         help
 921           This option enables support for MPIIX PATA support.
 922
 923           If unsure, say N.
 924
 925 config PATA_NS87410
 926         tristate "Nat Semi NS87410 PATA support"
 927         depends on PCI
 928         help
 929           This option enables support for the National Semiconductor
 930           NS87410 PCI-IDE controller.
 931
 932           If unsure, say N.
 933
 934 config PATA_OPTI
 935         tristate "OPTI621/6215 PATA support (Very Experimental)"
 936         depends on PCI
 937         help
 938           This option enables full PIO support for the early Opti ATA
 939           controllers found on some old motherboards.
 940
 941           If unsure, say N.
 942
 943 config PATA_PALMLD
 944         tristate "Palm LifeDrive PATA support"
 945         depends on MACH_PALMLD
 946         help
 947           This option enables support for Palm LifeDrive's internal ATA
 948           port via the new ATA layer.
 949
 950           If unsure, say N.
 951
 952 config PATA_PCMCIA
 953         tristate "PCMCIA PATA support"
 954         depends on PCMCIA
 955         help
 956           This option enables support for PCMCIA ATA interfaces, including
 957           compact flash card adapters via the new ATA layer.
 958
 959           If unsure, say N.
 960
 961 config PATA_PLATFORM
 962         tristate "Generic platform device PATA support"
 963         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 964         help
 965           This option enables support for generic directly connected ATA
 966           devices commonly found on embedded systems.
 967
 968           If unsure, say N.
 969
 970 config PATA_OF_PLATFORM
 971         tristate "OpenFirmware platform device PATA support"
 972         depends on PATA_PLATFORM && OF
 973         help
 974           This option enables support for generic directly connected ATA
 975           devices commonly found on embedded systems with OpenFirmware
 976           bindings.
 977
 978           If unsure, say N.
 979
 980 config PATA_QDI
 981         tristate "QDI VLB PATA support"
 982         depends on ISA
 983         select PATA_LEGACY
 984         help
 985           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 986
 987 config PATA_RB532
 988         tristate "RouterBoard 532 PATA CompactFlash support"
 989         depends on MIKROTIK_RB532
 990         help
 991           This option enables support for the RouterBoard 532
 992           PATA CompactFlash controller.
 993
 994           If unsure, say N.
 995
 996 config PATA_RZ1000
 997         tristate "PC Tech RZ1000 PATA support"
 998         depends on PCI
 999         help
1000           This option enables basic support for the PC Tech RZ1000/1
1001           PATA controllers via the new ATA layer
1002
1003           If unsure, say N.
1004
1005 config PATA_SAMSUNG_CF
1006         tristate "Samsung SoC PATA support"
1007         depends on SAMSUNG_DEV_IDE
1008         help
1009           This option enables basic support for Samsung's S3C/S5P board
1010           PATA controllers via the new ATA layer
1011
1012           If unsure, say N.
1013
1014 config PATA_WINBOND_VLB
1015         tristate "Winbond W83759A VLB PATA support (Experimental)"
1016         depends on ISA
1017         select PATA_LEGACY
1018         help
1019           Support for the Winbond W83759A controller on Vesa Local Bus
1020           systems.
1021
1022 comment "Generic fallback / legacy drivers"
1023
1024 config PATA_ACPI
1025         tristate "ACPI firmware driver for PATA"
1026         depends on ATA_ACPI && ATA_BMDMA
1027         help
1028           This option enables an ACPI method driver which drives
1029           motherboard PATA controller interfaces through the ACPI
1030           firmware in the BIOS. This driver can sometimes handle
1031           otherwise unsupported hardware.
1032
1033 config ATA_GENERIC
1034         tristate "Generic ATA support"
1035         depends on PCI && ATA_BMDMA
1036         help
1037           This option enables support for generic BIOS configured
1038           ATA controllers via the new ATA layer
1039
1040           If unsure, say N.
1041
1042 config PATA_LEGACY
1043         tristate "Legacy ISA PATA support (Experimental)"
1044         depends on (ISA || PCI)
1045         help
1046           This option enables support for ISA/VLB/PCI bus legacy PATA
1047           ports and allows them to be accessed via the new ATA layer.
1048
1049           If unsure, say N.
1050
1051 endif # ATA_SFF
1052 endif # ATA