drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use a ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_IMX
 101         tristate "Freescale i.MX AHCI SATA support"
 102         depends on SATA_AHCI_PLATFORM && MFD_SYSCON
 103         help
 104           This option enables support for the Freescale i.MX SoC's
 105           onboard AHCI SATA.
 106
 107           If unsure, say N.
 108
 109 config SATA_FSL
 110         tristate "Freescale 3.0Gbps SATA support"
 111         depends on FSL_SOC
 112         help
 113           This option enables support for Freescale 3.0Gbps SATA controller.
 114           It can be found on MPC837x and MPC8315.
 115
 116           If unsure, say N.
 117
 118 config SATA_INIC162X
 119         tristate "Initio 162x SATA support (Very Experimental)"
 120         depends on PCI
 121         help
 122           This option enables support for Initio 162x Serial ATA.
 123
 124 config SATA_ACARD_AHCI
 125         tristate "ACard AHCI variant (ATP 8620)"
 126         depends on PCI
 127         help
 128           This option enables support for Acard.
 129
 130           If unsure, say N.
 131
 132 config SATA_SIL24
 133         tristate "Silicon Image 3124/3132 SATA support"
 134         depends on PCI
 135         help
 136           This option enables support for Silicon Image 3124/3132 Serial ATA.
 137
 138           If unsure, say N.
 139
 140 config ATA_SFF
 141         bool "ATA SFF support (for legacy IDE and PATA)"
 142         default y
 143         help
 144           This option adds support for ATA controllers with SFF
 145           compliant or similar programming interface.
 146
 147           SFF is the legacy IDE interface that has been around since
 148           the dawn of time.  Almost all PATA controllers have an
 149           SFF interface.  Many SATA controllers have an SFF interface
 150           when configured into a legacy compatibility mode.
 151
 152           For users with exclusively modern controllers like AHCI,
 153           Silicon Image 3124, or Marvell 6440, you may choose to
 154           disable this unneeded SFF support.
 155
 156           If unsure, say Y.
 157
 158 if ATA_SFF
 159
 160 comment "SFF controllers with custom DMA interface"
 161
 162 config PDC_ADMA
 163         tristate "Pacific Digital ADMA support"
 164         depends on PCI
 165         help
 166           This option enables support for Pacific Digital ADMA controllers
 167
 168           If unsure, say N.
 169
 170 config PATA_OCTEON_CF
 171         tristate "OCTEON Boot Bus Compact Flash support"
 172         depends on CAVIUM_OCTEON_SOC
 173         help
 174           This option enables a polled compact flash driver for use with
 175           compact flash cards attached to the OCTEON boot bus.
 176
 177           If unsure, say N.
 178
 179 config SATA_QSTOR
 180         tristate "Pacific Digital SATA QStor support"
 181         depends on PCI
 182         help
 183           This option enables support for Pacific Digital Serial ATA QStor.
 184
 185           If unsure, say N.
 186
 187 config SATA_SX4
 188         tristate "Promise SATA SX4 support (Experimental)"
 189         depends on PCI
 190         help
 191           This option enables support for Promise Serial ATA SX4.
 192
 193           If unsure, say N.
 194
 195 config ATA_BMDMA
 196         bool "ATA BMDMA support"
 197         default y
 198         help
 199           This option adds support for SFF ATA controllers with BMDMA
 200           capability.  BMDMA stands for bus-master DMA and is the
 201           de facto DMA interface for SFF controllers.
 202
 203           If unsure, say Y.
 204
 205 if ATA_BMDMA
 206
 207 comment "SATA SFF controllers with BMDMA"
 208
 209 config ATA_PIIX
 210         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 211         depends on PCI
 212         help
 213           This option enables support for ICH5/6/7/8 Serial ATA
 214           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 215           host controllers.
 216
 217           If unsure, say N.
 218
 219 config SATA_DWC
 220         tristate "DesignWare Cores SATA support"
 221         depends on 460EX
 222         help
 223           This option enables support for the on-chip SATA controller of the
 224           AppliedMicro processor 460EX.
 225
 226           If unsure, say N.
 227
 228 config SATA_DWC_DEBUG
 229         bool "Debugging driver version"
 230         depends on SATA_DWC
 231         help
 232           This option enables debugging output in the driver.
 233
 234 config SATA_DWC_VDEBUG
 235         bool "Verbose debug output"
 236         depends on SATA_DWC_DEBUG
 237         help
 238           This option enables the taskfile dumping and NCQ debugging.
 239
 240 config SATA_HIGHBANK
 241         tristate "Calxeda Highbank SATA support"
 242         help
 243           This option enables support for the Calxeda Highbank SoC's
 244           onboard SATA.
 245
 246           If unsure, say N.
 247
 248 config SATA_MV
 249         tristate "Marvell SATA support"
 250         select GENERIC_PHY
 251         help
 252           This option enables support for the Marvell Serial ATA family.
 253           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 254           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 255
 256           If unsure, say N.
 257
 258 config SATA_NV
 259         tristate "NVIDIA SATA support"
 260         depends on PCI
 261         help
 262           This option enables support for NVIDIA Serial ATA.
 263
 264           If unsure, say N.
 265
 266 config SATA_PROMISE
 267         tristate "Promise SATA TX2/TX4 support"
 268         depends on PCI
 269         help
 270           This option enables support for Promise Serial ATA TX2/TX4.
 271
 272           If unsure, say N.
 273
 274 config SATA_RCAR
 275         tristate "Renesas R-Car SATA support"
 276         help
 277           This option enables support for Renesas R-Car Serial ATA.
 278
 279           If unsure, say N.
 280
 281 config SATA_SIL
 282         tristate "Silicon Image SATA support"
 283         depends on PCI
 284         help
 285           This option enables support for Silicon Image Serial ATA.
 286
 287           If unsure, say N.
 288
 289 config SATA_SIS
 290         tristate "SiS 964/965/966/180 SATA support"
 291         depends on PCI
 292         select PATA_SIS
 293         help
 294           This option enables support for SiS Serial ATA on
 295           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 296           The PATA support for SiS 180 requires additionally to
 297           enable the PATA_SIS driver in the config.
 298           If unsure, say N.
 299
 300 config SATA_SVW
 301         tristate "ServerWorks Frodo / Apple K2 SATA support"
 302         depends on PCI
 303         help
 304           This option enables support for Broadcom/Serverworks/Apple K2
 305           SATA support.
 306
 307           If unsure, say N.
 308
 309 config SATA_ULI
 310         tristate "ULi Electronics SATA support"
 311         depends on PCI
 312         help
 313           This option enables support for ULi Electronics SATA.
 314
 315           If unsure, say N.
 316
 317 config SATA_VIA
 318         tristate "VIA SATA support"
 319         depends on PCI
 320         help
 321           This option enables support for VIA Serial ATA.
 322
 323           If unsure, say N.
 324
 325 config SATA_VITESSE
 326         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 327         depends on PCI
 328         help
 329           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 330
 331           If unsure, say N.
 332
 333 comment "PATA SFF controllers with BMDMA"
 334
 335 config PATA_ALI
 336         tristate "ALi PATA support"
 337         depends on PCI
 338         help
 339           This option enables support for the ALi ATA interfaces
 340           found on the many ALi chipsets.
 341
 342           If unsure, say N.
 343
 344 config PATA_AMD
 345         tristate "AMD/NVidia PATA support"
 346         depends on PCI
 347         help
 348           This option enables support for the AMD and NVidia PATA
 349           interfaces found on the chipsets for Athlon/Athlon64.
 350
 351           If unsure, say N.
 352
 353 config PATA_ARASAN_CF
 354         tristate "ARASAN CompactFlash PATA Controller Support"
 355         depends on DMADEVICES
 356         select DMA_ENGINE
 357         help
 358           Say Y here to support the ARASAN CompactFlash PATA controller
 359
 360 config PATA_ARTOP
 361         tristate "ARTOP 6210/6260 PATA support"
 362         depends on PCI
 363         help
 364           This option enables support for ARTOP PATA controllers.
 365
 366           If unsure, say N.
 367
 368 config PATA_ATIIXP
 369         tristate "ATI PATA support"
 370         depends on PCI
 371         help
 372           This option enables support for the ATI ATA interfaces
 373           found on the many ATI chipsets.
 374
 375           If unsure, say N.
 376
 377 config PATA_ATP867X
 378         tristate "ARTOP/Acard ATP867X PATA support"
 379         depends on PCI
 380         help
 381           This option enables support for ARTOP/Acard ATP867X PATA
 382           controllers.
 383
 384           If unsure, say N.
 385
 386 config PATA_BF54X
 387         tristate "Blackfin 54x ATAPI support"
 388         depends on BF542 || BF548 || BF549
 389         help
 390           This option enables support for the built-in ATAPI controller on
 391           Blackfin 54x family chips.
 392
 393           If unsure, say N.
 394
 395 config PATA_CMD64X
 396         tristate "CMD64x PATA support"
 397         depends on PCI
 398         help
 399           This option enables support for the CMD64x series chips
 400           except for the CMD640.
 401
 402           If unsure, say N.
 403
 404 config PATA_CS5520
 405         tristate "CS5510/5520 PATA support"
 406         depends on PCI
 407         help
 408           This option enables support for the Cyrix 5510/5520
 409           companion chip used with the MediaGX/Geode processor family.
 410
 411           If unsure, say N.
 412
 413 config PATA_CS5530
 414         tristate "CS5530 PATA support"
 415         depends on PCI
 416         help
 417           This option enables support for the Cyrix/NatSemi/AMD CS5530
 418           companion chip used with the MediaGX/Geode processor family.
 419
 420           If unsure, say N.
 421
 422 config PATA_CS5535
 423         tristate "CS5535 PATA support (Experimental)"
 424         depends on PCI && X86 && !X86_64
 425         help
 426           This option enables support for the NatSemi/AMD CS5535
 427           companion chip used with the Geode processor family.
 428
 429           If unsure, say N.
 430
 431 config PATA_CS5536
 432         tristate "CS5536 PATA support"
 433         depends on PCI
 434         help
 435           This option enables support for the AMD CS5536
 436           companion chip used with the Geode LX processor family.
 437
 438           If unsure, say N.
 439
 440 config PATA_CYPRESS
 441         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 442         depends on PCI
 443         help
 444           This option enables support for the Cypress/Contaq CY82C693
 445           chipset found in some Alpha systems
 446
 447           If unsure, say N.
 448
 449 config PATA_EFAR
 450         tristate "EFAR SLC90E66 support"
 451         depends on PCI
 452         help
 453           This option enables support for the EFAR SLC90E66
 454           IDE controller found on some older machines.
 455
 456           If unsure, say N.
 457
 458 config PATA_EP93XX
 459         tristate "Cirrus Logic EP93xx PATA support"
 460         depends on ARCH_EP93XX
 461         help
 462           This option enables support for the PATA controller in
 463           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 464
 465           If unsure, say N.
 466
 467 config PATA_HPT366
 468         tristate "HPT 366/368 PATA support"
 469         depends on PCI
 470         help
 471           This option enables support for the HPT 366 and 368
 472           PATA controllers via the new ATA layer.
 473
 474           If unsure, say N.
 475
 476 config PATA_HPT37X
 477         tristate "HPT 370/370A/371/372/374/302 PATA support"
 478         depends on PCI
 479         help
 480           This option enables support for the majority of the later HPT
 481           PATA controllers via the new ATA layer.
 482
 483           If unsure, say N.
 484
 485 config PATA_HPT3X2N
 486         tristate "HPT 371N/372N/302N PATA support"
 487         depends on PCI
 488         help
 489           This option enables support for the N variant HPT PATA
 490           controllers via the new ATA layer.
 491
 492           If unsure, say N.
 493
 494 config PATA_HPT3X3
 495         tristate "HPT 343/363 PATA support"
 496         depends on PCI
 497         help
 498           This option enables support for the HPT 343/363
 499           PATA controllers via the new ATA layer
 500
 501           If unsure, say N.
 502
 503 config PATA_HPT3X3_DMA
 504         bool "HPT 343/363 DMA support"
 505         depends on PATA_HPT3X3
 506         help
 507           This option enables DMA support for the HPT343/363
 508           controllers. Enable with care as there are still some
 509           problems with DMA on this chipset.
 510
 511 config PATA_ICSIDE
 512         tristate "Acorn ICS PATA support"
 513         depends on ARM && ARCH_ACORN
 514         help
 515           On Acorn systems, say Y here if you wish to use the ICS PATA
 516           interface card.  This is not required for ICS partition support.
 517           If you are unsure, say N to this.
 518
 519 config PATA_IMX
 520         tristate "PATA support for Freescale iMX"
 521         depends on ARCH_MXC
 522         help
 523           This option enables support for the PATA host available on Freescale
 524           iMX SoCs.
 525
 526           If unsure, say N.
 527
 528 config PATA_IT8213
 529         tristate "IT8213 PATA support (Experimental)"
 530         depends on PCI
 531         help
 532           This option enables support for the ITE 821 PATA
 533           controllers via the new ATA layer.
 534
 535           If unsure, say N.
 536
 537 config PATA_IT821X
 538         tristate "IT8211/2 PATA support"
 539         depends on PCI
 540         help
 541           This option enables support for the ITE 8211 and 8212
 542           PATA controllers via the new ATA layer, including RAID
 543           mode.
 544
 545           If unsure, say N.
 546
 547 config PATA_JMICRON
 548         tristate "JMicron PATA support"
 549         depends on PCI
 550         help
 551           Enable support for the JMicron IDE controller, via the new
 552           ATA layer.
 553
 554           If unsure, say N.
 555
 556 config PATA_MACIO
 557         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 558         depends on PPC_PMAC
 559         help
 560           Most IDE capable PowerMacs have IDE busses driven by a variant
 561           of this controller which is part of the Apple chipset used on
 562           most PowerMac models. Some models have multiple busses using
 563           different chipsets, though generally, MacIO is one of them.
 564
 565 config PATA_MARVELL
 566         tristate "Marvell PATA support via legacy mode"
 567         depends on PCI
 568         help
 569           This option enables limited support for the Marvell 88SE61xx ATA
 570           controllers. If you wish to use only the SATA ports then select
 571           the AHCI driver alone. If you wish to the use the PATA port or
 572           both SATA and PATA include this driver.
 573
 574           If unsure, say N.
 575
 576 config PATA_MPC52xx
 577         tristate "Freescale MPC52xx SoC internal IDE"
 578         depends on PPC_MPC52xx && PPC_BESTCOMM
 579         select PPC_BESTCOMM_ATA
 580         help
 581           This option enables support for integrated IDE controller
 582           of the Freescale MPC52xx SoC.
 583
 584           If unsure, say N.
 585
 586 config PATA_NETCELL
 587         tristate "NETCELL Revolution RAID support"
 588         depends on PCI
 589         help
 590           This option enables support for the Netcell Revolution RAID
 591           PATA controller.
 592
 593           If unsure, say N.
 594
 595 config PATA_NINJA32
 596         tristate "Ninja32/Delkin Cardbus ATA support"
 597         depends on PCI
 598         help
 599           This option enables support for the Ninja32, Delkin and
 600           possibly other brands of Cardbus ATA adapter
 601
 602           If unsure, say N.
 603
 604 config PATA_NS87415
 605         tristate "Nat Semi NS87415 PATA support"
 606         depends on PCI
 607         help
 608           This option enables support for the National Semiconductor
 609           NS87415 PCI-IDE controller.
 610
 611           If unsure, say N.
 612
 613 config PATA_OLDPIIX
 614         tristate "Intel PATA old PIIX support"
 615         depends on PCI
 616         help
 617           This option enables support for early PIIX PATA support.
 618
 619           If unsure, say N.
 620
 621 config PATA_OPTIDMA
 622         tristate "OPTI FireStar PATA support (Very Experimental)"
 623         depends on PCI
 624         help
 625           This option enables DMA/PIO support for the later OPTi
 626           controllers found on some old motherboards and in some
 627           laptops.
 628
 629           If unsure, say N.
 630
 631 config PATA_PDC2027X
 632         tristate "Promise PATA 2027x support"
 633         depends on PCI
 634         help
 635           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 636
 637           If unsure, say N.
 638
 639 config PATA_PDC_OLD
 640         tristate "Older Promise PATA controller support"
 641         depends on PCI
 642         help
 643           This option enables support for the Promise 20246, 20262, 20263,
 644           20265 and 20267 adapters.
 645
 646           If unsure, say N.
 647
 648 config PATA_RADISYS
 649         tristate "RADISYS 82600 PATA support (Experimental)"
 650         depends on PCI
 651         help
 652           This option enables support for the RADISYS 82600
 653           PATA controllers via the new ATA layer
 654
 655           If unsure, say N.
 656
 657 config PATA_RDC
 658         tristate "RDC PATA support"
 659         depends on PCI
 660         help
 661           This option enables basic support for the later RDC PATA controllers
 662           controllers via the new ATA layer. For the RDC 1010, you need to
 663           enable the IT821X driver instead.
 664
 665           If unsure, say N.
 666
 667 config PATA_SC1200
 668         tristate "SC1200 PATA support"
 669         depends on PCI
 670         help
 671           This option enables support for the NatSemi/AMD SC1200 SoC
 672           companion chip used with the Geode processor family.
 673
 674           If unsure, say N.
 675
 676 config PATA_SCC
 677         tristate "Toshiba's Cell Reference Set IDE support"
 678         depends on PCI && PPC_CELLEB
 679         help
 680           This option enables support for the built-in IDE controller on
 681           Toshiba Cell Reference Board.
 682
 683           If unsure, say N.
 684
 685 config PATA_SCH
 686         tristate "Intel SCH PATA support"
 687         depends on PCI
 688         help
 689           This option enables support for Intel SCH PATA on the Intel
 690           SCH (US15W, US15L, UL11L) series host controllers.
 691
 692           If unsure, say N.
 693
 694 config PATA_SERVERWORKS
 695         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 696         depends on PCI
 697         help
 698           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 699           HT1000 PATA controllers, via the new ATA layer.
 700
 701           If unsure, say N.
 702
 703 config PATA_SIL680
 704         tristate "CMD / Silicon Image 680 PATA support"
 705         depends on PCI
 706         help
 707           This option enables support for CMD / Silicon Image 680 PATA.
 708
 709           If unsure, say N.
 710
 711 config PATA_SIS
 712         tristate "SiS PATA support"
 713         depends on PCI
 714         help
 715           This option enables support for SiS PATA controllers
 716
 717           If unsure, say N.
 718
 719 config PATA_TOSHIBA
 720         tristate "Toshiba Piccolo support (Experimental)"
 721         depends on PCI
 722         help
 723           Support for the Toshiba Piccolo controllers. Currently only the
 724           primary channel is supported by this driver.
 725
 726           If unsure, say N.
 727
 728 config PATA_TRIFLEX
 729         tristate "Compaq Triflex PATA support"
 730         depends on PCI
 731         help
 732           Enable support for the Compaq 'Triflex' IDE controller as found
 733           on many Compaq Pentium-Pro systems, via the new ATA layer.
 734
 735           If unsure, say N.
 736
 737 config PATA_VIA
 738         tristate "VIA PATA support"
 739         depends on PCI
 740         help
 741           This option enables support for the VIA PATA interfaces
 742           found on the many VIA chipsets.
 743
 744           If unsure, say N.
 745
 746 config PATA_PXA
 747         tristate "PXA DMA-capable PATA support"
 748         depends on ARCH_PXA
 749         help
 750           This option enables support for harddrive attached to PXA CPU's bus.
 751
 752           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 753                 is not capable of doing MWDMA, use pata_platform instead.
 754
 755           If unsure, say N.
 756
 757 config PATA_WINBOND
 758         tristate "Winbond SL82C105 PATA support"
 759         depends on PCI
 760         help
 761           This option enables support for SL82C105 PATA devices found in the
 762           Netwinder and some other systems
 763
 764           If unsure, say N.
 765
 766 endif # ATA_BMDMA
 767
 768 comment "PIO-only SFF controllers"
 769
 770 config PATA_AT32
 771         tristate "Atmel AVR32 PATA support (Experimental)"
 772         depends on AVR32 && PLATFORM_AT32AP
 773         help
 774           This option enables support for the IDE devices on the
 775           Atmel AT32AP platform.
 776
 777           If unsure, say N.
 778
 779 config PATA_AT91
 780         tristate "PATA support for AT91SAM9260"
 781         depends on ARM && ARCH_AT91
 782         help
 783           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 784
 785           If unsure, say N.
 786
 787 config PATA_CMD640_PCI
 788         tristate "CMD640 PCI PATA support (Experimental)"
 789         depends on PCI
 790         help
 791           This option enables support for the CMD640 PCI IDE
 792           interface chip. Only the primary channel is currently
 793           supported.
 794
 795           If unsure, say N.
 796
 797 config PATA_ISAPNP
 798         tristate "ISA Plug and Play PATA support"
 799         depends on ISAPNP
 800         help
 801           This option enables support for ISA plug & play ATA
 802           controllers such as those found on old soundcards.
 803
 804           If unsure, say N.
 805
 806 config PATA_IXP4XX_CF
 807         tristate "IXP4XX Compact Flash support"
 808         depends on ARCH_IXP4XX
 809         help
 810           This option enables support for a Compact Flash connected on
 811           the ixp4xx expansion bus. This driver had been written for
 812           Loft/Avila boards in mind but can work with others.
 813
 814           If unsure, say N.
 815
 816 config PATA_MPIIX
 817         tristate "Intel PATA MPIIX support"
 818         depends on PCI
 819         help
 820           This option enables support for MPIIX PATA support.
 821
 822           If unsure, say N.
 823
 824 config PATA_NS87410
 825         tristate "Nat Semi NS87410 PATA support"
 826         depends on PCI
 827         help
 828           This option enables support for the National Semiconductor
 829           NS87410 PCI-IDE controller.
 830
 831           If unsure, say N.
 832
 833 config PATA_OPTI
 834         tristate "OPTI621/6215 PATA support (Very Experimental)"
 835         depends on PCI
 836         help
 837           This option enables full PIO support for the early Opti ATA
 838           controllers found on some old motherboards.
 839
 840           If unsure, say N.
 841
 842 config PATA_PALMLD
 843         tristate "Palm LifeDrive PATA support"
 844         depends on MACH_PALMLD
 845         help
 846           This option enables support for Palm LifeDrive's internal ATA
 847           port via the new ATA layer.
 848
 849           If unsure, say N.
 850
 851 config PATA_PCMCIA
 852         tristate "PCMCIA PATA support"
 853         depends on PCMCIA
 854         help
 855           This option enables support for PCMCIA ATA interfaces, including
 856           compact flash card adapters via the new ATA layer.
 857
 858           If unsure, say N.
 859
 860 config PATA_PLATFORM
 861         tristate "Generic platform device PATA support"
 862         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 863         help
 864           This option enables support for generic directly connected ATA
 865           devices commonly found on embedded systems.
 866
 867           If unsure, say N.
 868
 869 config PATA_OF_PLATFORM
 870         tristate "OpenFirmware platform device PATA support"
 871         depends on PATA_PLATFORM && OF
 872         help
 873           This option enables support for generic directly connected ATA
 874           devices commonly found on embedded systems with OpenFirmware
 875           bindings.
 876
 877           If unsure, say N.
 878
 879 config PATA_QDI
 880         tristate "QDI VLB PATA support"
 881         depends on ISA
 882         select PATA_LEGACY
 883         help
 884           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 885
 886 config PATA_RB532
 887         tristate "RouterBoard 532 PATA CompactFlash support"
 888         depends on MIKROTIK_RB532
 889         help
 890           This option enables support for the RouterBoard 532
 891           PATA CompactFlash controller.
 892
 893           If unsure, say N.
 894
 895 config PATA_RZ1000
 896         tristate "PC Tech RZ1000 PATA support"
 897         depends on PCI
 898         help
 899           This option enables basic support for the PC Tech RZ1000/1
 900           PATA controllers via the new ATA layer
 901
 902           If unsure, say N.
 903
 904 config PATA_SAMSUNG_CF
 905         tristate "Samsung SoC PATA support"
 906         depends on SAMSUNG_DEV_IDE
 907         help
 908           This option enables basic support for Samsung's S3C/S5P board
 909           PATA controllers via the new ATA layer
 910
 911           If unsure, say N.
 912
 913 config PATA_WINBOND_VLB
 914         tristate "Winbond W83759A VLB PATA support (Experimental)"
 915         depends on ISA
 916         select PATA_LEGACY
 917         help
 918           Support for the Winbond W83759A controller on Vesa Local Bus
 919           systems.
 920
 921 comment "Generic fallback / legacy drivers"
 922
 923 config PATA_ACPI
 924         tristate "ACPI firmware driver for PATA"
 925         depends on ATA_ACPI && ATA_BMDMA
 926         help
 927           This option enables an ACPI method driver which drives
 928           motherboard PATA controller interfaces through the ACPI
 929           firmware in the BIOS. This driver can sometimes handle
 930           otherwise unsupported hardware.
 931
 932 config ATA_GENERIC
 933         tristate "Generic ATA support"
 934         depends on PCI && ATA_BMDMA
 935         help
 936           This option enables support for generic BIOS configured
 937           ATA controllers via the new ATA layer
 938
 939           If unsure, say N.
 940
 941 config PATA_LEGACY
 942         tristate "Legacy ISA PATA support (Experimental)"
 943         depends on (ISA || PCI)
 944         help
 945           This option enables support for ISA/VLB/PCI bus legacy PATA
 946           ports and allows them to be accessed via the new ATA layer.
 947
 948           If unsure, say N.
 949
 950 endif # ATA_SFF
 951 endif # ATA