drivers/ata/Kconfig

   1 #
   2 # SATA/PATA driver configuration
   3 #
   4
   5 config HAVE_PATA_PLATFORM
   6         bool
   7         help
   8           This is an internal configuration node for any machine that
   9           uses pata-platform driver to enable the relevant driver in the
  10           configuration structure without having to submit endless patches
  11           to update the PATA_PLATFORM entry.
  12
  13 menuconfig ATA
  14         tristate "Serial ATA and Parallel ATA drivers (libata)"
  15         depends on HAS_IOMEM
  16         depends on BLOCK
  17         depends on !(M32R || M68K || S390) || BROKEN
  18         select SCSI
  19         ---help---
  20           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
  21           any other ATA device under Linux, say Y and make sure that you know
  22           the name of your ATA host adapter (the card inside your computer
  23           that "speaks" the ATA protocol, also called ATA controller),
  24           because you will be asked for it.
  25
  26           NOTE: ATA enables basic SCSI support; *however*,
  27           'SCSI disk support', 'SCSI tape support', or
  28           'SCSI CDROM support' may also be needed,
  29           depending on your hardware configuration.
  30
  31 if ATA
  32
  33 config ATA_NONSTANDARD
  34        bool
  35        default n
  36
  37 config ATA_VERBOSE_ERROR
  38         bool "Verbose ATA error reporting"
  39         default y
  40         help
  41           This option adds parsing of ATA command descriptions and error bits
  42           in libata kernel output, making it easier to interpret.
  43           This option will enlarge the kernel by approx. 6KB. Disable it only
  44           if kernel size is more important than ease of debugging.
  45
  46           If unsure, say Y.
  47
  48 config ATA_ACPI
  49         bool "ATA ACPI Support"
  50         depends on ACPI && PCI
  51         default y
  52         help
  53           This option adds support for ATA-related ACPI objects.
  54           These ACPI objects add the ability to retrieve taskfiles
  55           from the ACPI BIOS and write them to the disk controller.
  56           These objects may be related to performance, security,
  57           power management, or other areas.
  58           You can disable this at kernel boot time by using the
  59           option libata.noacpi=1
  60
  61 config SATA_ZPODD
  62         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
  63         depends on ATA_ACPI && PM_RUNTIME
  64         default n
  65         help
  66           This option adds support for SATA Zero Power Optical Disc
  67           Drive (ZPODD). It requires both the ODD and the platform
  68           support, and if enabled, will automatically power on/off the
  69           ODD when certain condition is satisfied. This does not impact
  70           end user's experience of the ODD, only power is saved when
  71           the ODD is not in use (i.e. no disc inside).
  72
  73           If unsure, say N.
  74
  75 config SATA_PMP
  76         bool "SATA Port Multiplier support"
  77         default y
  78         help
  79           This option adds support for SATA Port Multipliers
  80           (the SATA version of an ethernet hub, or SAS expander).
  81
  82 comment "Controllers with non-SFF native interface"
  83
  84 config SATA_AHCI
  85         tristate "AHCI SATA support"
  86         depends on PCI
  87         help
  88           This option enables support for AHCI Serial ATA.
  89
  90           If unsure, say N.
  91
  92 config SATA_AHCI_PLATFORM
  93         tristate "Platform AHCI SATA support"
  94         help
  95           This option enables support for Platform AHCI Serial ATA
  96           controllers.
  97
  98           If unsure, say N.
  99
 100 config AHCI_DA850
 101         tristate "DaVinci DA850 AHCI SATA support"
 102         depends on ARCH_DAVINCI_DA850
 103         help
 104           This option enables support for the DaVinci DA850 SoC's
 105           onboard AHCI SATA.
 106
 107           If unsure, say N.
 108
 109 config AHCI_ST
 110         tristate "ST AHCI SATA support"
 111         depends on ARCH_STI
 112         help
 113           This option enables support for ST AHCI SATA controller.
 114
 115           If unsure, say N.
 116
 117 config AHCI_IMX
 118         tristate "Freescale i.MX AHCI SATA support"
 119         depends on MFD_SYSCON
 120         help
 121           This option enables support for the Freescale i.MX SoC's
 122           onboard AHCI SATA.
 123
 124           If unsure, say N.
 125
 126 config AHCI_SUNXI
 127         tristate "Allwinner sunxi AHCI SATA support"
 128         depends on ARCH_SUNXI
 129         help
 130           This option enables support for the Allwinner sunxi SoC's
 131           onboard AHCI SATA.
 132
 133           If unsure, say N.
 134
 135 config AHCI_XGENE
 136         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
 137         depends on ARM64 || COMPILE_TEST
 138         select PHY_XGENE
 139         help
 140          This option enables support for APM X-Gene SoC SATA host controller.
 141
 142 config SATA_FSL
 143         tristate "Freescale 3.0Gbps SATA support"
 144         depends on FSL_SOC
 145         help
 146           This option enables support for Freescale 3.0Gbps SATA controller.
 147           It can be found on MPC837x and MPC8315.
 148
 149           If unsure, say N.
 150
 151 config SATA_INIC162X
 152         tristate "Initio 162x SATA support (Very Experimental)"
 153         depends on PCI
 154         help
 155           This option enables support for Initio 162x Serial ATA.
 156
 157 config SATA_ACARD_AHCI
 158         tristate "ACard AHCI variant (ATP 8620)"
 159         depends on PCI
 160         help
 161           This option enables support for Acard.
 162
 163           If unsure, say N.
 164
 165 config SATA_SIL24
 166         tristate "Silicon Image 3124/3132 SATA support"
 167         depends on PCI
 168         help
 169           This option enables support for Silicon Image 3124/3132 Serial ATA.
 170
 171           If unsure, say N.
 172
 173 config ATA_SFF
 174         bool "ATA SFF support (for legacy IDE and PATA)"
 175         default y
 176         help
 177           This option adds support for ATA controllers with SFF
 178           compliant or similar programming interface.
 179
 180           SFF is the legacy IDE interface that has been around since
 181           the dawn of time.  Almost all PATA controllers have an
 182           SFF interface.  Many SATA controllers have an SFF interface
 183           when configured into a legacy compatibility mode.
 184
 185           For users with exclusively modern controllers like AHCI,
 186           Silicon Image 3124, or Marvell 6440, you may choose to
 187           disable this unneeded SFF support.
 188
 189           If unsure, say Y.
 190
 191 if ATA_SFF
 192
 193 comment "SFF controllers with custom DMA interface"
 194
 195 config PDC_ADMA
 196         tristate "Pacific Digital ADMA support"
 197         depends on PCI
 198         help
 199           This option enables support for Pacific Digital ADMA controllers
 200
 201           If unsure, say N.
 202
 203 config PATA_OCTEON_CF
 204         tristate "OCTEON Boot Bus Compact Flash support"
 205         depends on CAVIUM_OCTEON_SOC
 206         help
 207           This option enables a polled compact flash driver for use with
 208           compact flash cards attached to the OCTEON boot bus.
 209
 210           If unsure, say N.
 211
 212 config SATA_QSTOR
 213         tristate "Pacific Digital SATA QStor support"
 214         depends on PCI
 215         help
 216           This option enables support for Pacific Digital Serial ATA QStor.
 217
 218           If unsure, say N.
 219
 220 config SATA_SX4
 221         tristate "Promise SATA SX4 support (Experimental)"
 222         depends on PCI
 223         help
 224           This option enables support for Promise Serial ATA SX4.
 225
 226           If unsure, say N.
 227
 228 config ATA_BMDMA
 229         bool "ATA BMDMA support"
 230         default y
 231         help
 232           This option adds support for SFF ATA controllers with BMDMA
 233           capability.  BMDMA stands for bus-master DMA and is the
 234           de facto DMA interface for SFF controllers.
 235
 236           If unsure, say Y.
 237
 238 if ATA_BMDMA
 239
 240 comment "SATA SFF controllers with BMDMA"
 241
 242 config ATA_PIIX
 243         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
 244         depends on PCI
 245         help
 246           This option enables support for ICH5/6/7/8 Serial ATA
 247           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
 248           host controllers.
 249
 250           If unsure, say N.
 251
 252 config SATA_DWC
 253         tristate "DesignWare Cores SATA support"
 254         depends on 460EX
 255         help
 256           This option enables support for the on-chip SATA controller of the
 257           AppliedMicro processor 460EX.
 258
 259           If unsure, say N.
 260
 261 config SATA_DWC_DEBUG
 262         bool "Debugging driver version"
 263         depends on SATA_DWC
 264         help
 265           This option enables debugging output in the driver.
 266
 267 config SATA_DWC_VDEBUG
 268         bool "Verbose debug output"
 269         depends on SATA_DWC_DEBUG
 270         help
 271           This option enables the taskfile dumping and NCQ debugging.
 272
 273 config SATA_HIGHBANK
 274         tristate "Calxeda Highbank SATA support"
 275         depends on ARCH_HIGHBANK || COMPILE_TEST
 276         help
 277           This option enables support for the Calxeda Highbank SoC's
 278           onboard SATA.
 279
 280           If unsure, say N.
 281
 282 config SATA_MV
 283         tristate "Marvell SATA support"
 284         depends on PCI || ARCH_DOVE || ARCH_KIRKWOOD || ARCH_MV78XX0 || \
 285                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
 286         select GENERIC_PHY
 287         help
 288           This option enables support for the Marvell Serial ATA family.
 289           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
 290           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
 291
 292           If unsure, say N.
 293
 294 config SATA_NV
 295         tristate "NVIDIA SATA support"
 296         depends on PCI
 297         help
 298           This option enables support for NVIDIA Serial ATA.
 299
 300           If unsure, say N.
 301
 302 config SATA_PROMISE
 303         tristate "Promise SATA TX2/TX4 support"
 304         depends on PCI
 305         help
 306           This option enables support for Promise Serial ATA TX2/TX4.
 307
 308           If unsure, say N.
 309
 310 config SATA_RCAR
 311         tristate "Renesas R-Car SATA support"
 312         depends on ARCH_SHMOBILE || COMPILE_TEST
 313         help
 314           This option enables support for Renesas R-Car Serial ATA.
 315
 316           If unsure, say N.
 317
 318 config SATA_SIL
 319         tristate "Silicon Image SATA support"
 320         depends on PCI
 321         help
 322           This option enables support for Silicon Image Serial ATA.
 323
 324           If unsure, say N.
 325
 326 config SATA_SIS
 327         tristate "SiS 964/965/966/180 SATA support"
 328         depends on PCI
 329         select PATA_SIS
 330         help
 331           This option enables support for SiS Serial ATA on
 332           SiS 964/965/966/180 and Parallel ATA on SiS 180.
 333           The PATA support for SiS 180 requires additionally to
 334           enable the PATA_SIS driver in the config.
 335           If unsure, say N.
 336
 337 config SATA_SVW
 338         tristate "ServerWorks Frodo / Apple K2 SATA support"
 339         depends on PCI
 340         help
 341           This option enables support for Broadcom/Serverworks/Apple K2
 342           SATA support.
 343
 344           If unsure, say N.
 345
 346 config SATA_ULI
 347         tristate "ULi Electronics SATA support"
 348         depends on PCI
 349         help
 350           This option enables support for ULi Electronics SATA.
 351
 352           If unsure, say N.
 353
 354 config SATA_VIA
 355         tristate "VIA SATA support"
 356         depends on PCI
 357         help
 358           This option enables support for VIA Serial ATA.
 359
 360           If unsure, say N.
 361
 362 config SATA_VITESSE
 363         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
 364         depends on PCI
 365         help
 366           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
 367
 368           If unsure, say N.
 369
 370 comment "PATA SFF controllers with BMDMA"
 371
 372 config PATA_ALI
 373         tristate "ALi PATA support"
 374         depends on PCI
 375         help
 376           This option enables support for the ALi ATA interfaces
 377           found on the many ALi chipsets.
 378
 379           If unsure, say N.
 380
 381 config PATA_AMD
 382         tristate "AMD/NVidia PATA support"
 383         depends on PCI
 384         help
 385           This option enables support for the AMD and NVidia PATA
 386           interfaces found on the chipsets for Athlon/Athlon64.
 387
 388           If unsure, say N.
 389
 390 config PATA_ARASAN_CF
 391         tristate "ARASAN CompactFlash PATA Controller Support"
 392         depends on ARCH_SPEAR13XX || COMPILE_TEST
 393         depends on DMADEVICES
 394         select DMA_ENGINE
 395         help
 396           Say Y here to support the ARASAN CompactFlash PATA controller
 397
 398 config PATA_ARTOP
 399         tristate "ARTOP 6210/6260 PATA support"
 400         depends on PCI
 401         help
 402           This option enables support for ARTOP PATA controllers.
 403
 404           If unsure, say N.
 405
 406 config PATA_ATIIXP
 407         tristate "ATI PATA support"
 408         depends on PCI
 409         help
 410           This option enables support for the ATI ATA interfaces
 411           found on the many ATI chipsets.
 412
 413           If unsure, say N.
 414
 415 config PATA_ATP867X
 416         tristate "ARTOP/Acard ATP867X PATA support"
 417         depends on PCI
 418         help
 419           This option enables support for ARTOP/Acard ATP867X PATA
 420           controllers.
 421
 422           If unsure, say N.
 423
 424 config PATA_BF54X
 425         tristate "Blackfin 54x ATAPI support"
 426         depends on BF542 || BF548 || BF549
 427         help
 428           This option enables support for the built-in ATAPI controller on
 429           Blackfin 54x family chips.
 430
 431           If unsure, say N.
 432
 433 config PATA_CMD64X
 434         tristate "CMD64x PATA support"
 435         depends on PCI
 436         help
 437           This option enables support for the CMD64x series chips
 438           except for the CMD640.
 439
 440           If unsure, say N.
 441
 442 config PATA_CS5520
 443         tristate "CS5510/5520 PATA support"
 444         depends on PCI && (X86_32 || COMPILE_TEST)
 445         help
 446           This option enables support for the Cyrix 5510/5520
 447           companion chip used with the MediaGX/Geode processor family.
 448
 449           If unsure, say N.
 450
 451 config PATA_CS5530
 452         tristate "CS5530 PATA support"
 453         depends on PCI && (X86_32 || COMPILE_TEST)
 454         help
 455           This option enables support for the Cyrix/NatSemi/AMD CS5530
 456           companion chip used with the MediaGX/Geode processor family.
 457
 458           If unsure, say N.
 459
 460 config PATA_CS5535
 461         tristate "CS5535 PATA support (Experimental)"
 462         depends on PCI && X86_32
 463         help
 464           This option enables support for the NatSemi/AMD CS5535
 465           companion chip used with the Geode processor family.
 466
 467           If unsure, say N.
 468
 469 config PATA_CS5536
 470         tristate "CS5536 PATA support"
 471         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
 472         help
 473           This option enables support for the AMD CS5536
 474           companion chip used with the Geode LX processor family.
 475
 476           If unsure, say N.
 477
 478 config PATA_CYPRESS
 479         tristate "Cypress CY82C693 PATA support (Very Experimental)"
 480         depends on PCI
 481         help
 482           This option enables support for the Cypress/Contaq CY82C693
 483           chipset found in some Alpha systems
 484
 485           If unsure, say N.
 486
 487 config PATA_EFAR
 488         tristate "EFAR SLC90E66 support"
 489         depends on PCI
 490         help
 491           This option enables support for the EFAR SLC90E66
 492           IDE controller found on some older machines.
 493
 494           If unsure, say N.
 495
 496 config PATA_EP93XX
 497         tristate "Cirrus Logic EP93xx PATA support"
 498         depends on ARCH_EP93XX
 499         help
 500           This option enables support for the PATA controller in
 501           the Cirrus Logic EP9312 and EP9315 ARM CPU.
 502
 503           If unsure, say N.
 504
 505 config PATA_HPT366
 506         tristate "HPT 366/368 PATA support"
 507         depends on PCI
 508         help
 509           This option enables support for the HPT 366 and 368
 510           PATA controllers via the new ATA layer.
 511
 512           If unsure, say N.
 513
 514 config PATA_HPT37X
 515         tristate "HPT 370/370A/371/372/374/302 PATA support"
 516         depends on PCI
 517         help
 518           This option enables support for the majority of the later HPT
 519           PATA controllers via the new ATA layer.
 520
 521           If unsure, say N.
 522
 523 config PATA_HPT3X2N
 524         tristate "HPT 371N/372N/302N PATA support"
 525         depends on PCI
 526         help
 527           This option enables support for the N variant HPT PATA
 528           controllers via the new ATA layer.
 529
 530           If unsure, say N.
 531
 532 config PATA_HPT3X3
 533         tristate "HPT 343/363 PATA support"
 534         depends on PCI
 535         help
 536           This option enables support for the HPT 343/363
 537           PATA controllers via the new ATA layer
 538
 539           If unsure, say N.
 540
 541 config PATA_HPT3X3_DMA
 542         bool "HPT 343/363 DMA support"
 543         depends on PATA_HPT3X3
 544         help
 545           This option enables DMA support for the HPT343/363
 546           controllers. Enable with care as there are still some
 547           problems with DMA on this chipset.
 548
 549 config PATA_ICSIDE
 550         tristate "Acorn ICS PATA support"
 551         depends on ARM && ARCH_ACORN
 552         help
 553           On Acorn systems, say Y here if you wish to use the ICS PATA
 554           interface card.  This is not required for ICS partition support.
 555           If you are unsure, say N to this.
 556
 557 config PATA_IMX
 558         tristate "PATA support for Freescale iMX"
 559         depends on ARCH_MXC
 560         help
 561           This option enables support for the PATA host available on Freescale
 562           iMX SoCs.
 563
 564           If unsure, say N.
 565
 566 config PATA_IT8213
 567         tristate "IT8213 PATA support (Experimental)"
 568         depends on PCI
 569         help
 570           This option enables support for the ITE 821 PATA
 571           controllers via the new ATA layer.
 572
 573           If unsure, say N.
 574
 575 config PATA_IT821X
 576         tristate "IT8211/2 PATA support"
 577         depends on PCI
 578         help
 579           This option enables support for the ITE 8211 and 8212
 580           PATA controllers via the new ATA layer, including RAID
 581           mode.
 582
 583           If unsure, say N.
 584
 585 config PATA_JMICRON
 586         tristate "JMicron PATA support"
 587         depends on PCI
 588         help
 589           Enable support for the JMicron IDE controller, via the new
 590           ATA layer.
 591
 592           If unsure, say N.
 593
 594 config PATA_MACIO
 595         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
 596         depends on PPC_PMAC
 597         help
 598           Most IDE capable PowerMacs have IDE busses driven by a variant
 599           of this controller which is part of the Apple chipset used on
 600           most PowerMac models. Some models have multiple busses using
 601           different chipsets, though generally, MacIO is one of them.
 602
 603 config PATA_MARVELL
 604         tristate "Marvell PATA support via legacy mode"
 605         depends on PCI
 606         help
 607           This option enables limited support for the Marvell 88SE61xx ATA
 608           controllers. If you wish to use only the SATA ports then select
 609           the AHCI driver alone. If you wish to the use the PATA port or
 610           both SATA and PATA include this driver.
 611
 612           If unsure, say N.
 613
 614 config PATA_MPC52xx
 615         tristate "Freescale MPC52xx SoC internal IDE"
 616         depends on PPC_MPC52xx && PPC_BESTCOMM
 617         select PPC_BESTCOMM_ATA
 618         help
 619           This option enables support for integrated IDE controller
 620           of the Freescale MPC52xx SoC.
 621
 622           If unsure, say N.
 623
 624 config PATA_NETCELL
 625         tristate "NETCELL Revolution RAID support"
 626         depends on PCI
 627         help
 628           This option enables support for the Netcell Revolution RAID
 629           PATA controller.
 630
 631           If unsure, say N.
 632
 633 config PATA_NINJA32
 634         tristate "Ninja32/Delkin Cardbus ATA support"
 635         depends on PCI
 636         help
 637           This option enables support for the Ninja32, Delkin and
 638           possibly other brands of Cardbus ATA adapter
 639
 640           If unsure, say N.
 641
 642 config PATA_NS87415
 643         tristate "Nat Semi NS87415 PATA support"
 644         depends on PCI
 645         help
 646           This option enables support for the National Semiconductor
 647           NS87415 PCI-IDE controller.
 648
 649           If unsure, say N.
 650
 651 config PATA_OLDPIIX
 652         tristate "Intel PATA old PIIX support"
 653         depends on PCI
 654         help
 655           This option enables support for early PIIX PATA support.
 656
 657           If unsure, say N.
 658
 659 config PATA_OPTIDMA
 660         tristate "OPTI FireStar PATA support (Very Experimental)"
 661         depends on PCI
 662         help
 663           This option enables DMA/PIO support for the later OPTi
 664           controllers found on some old motherboards and in some
 665           laptops.
 666
 667           If unsure, say N.
 668
 669 config PATA_PDC2027X
 670         tristate "Promise PATA 2027x support"
 671         depends on PCI
 672         help
 673           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
 674
 675           If unsure, say N.
 676
 677 config PATA_PDC_OLD
 678         tristate "Older Promise PATA controller support"
 679         depends on PCI
 680         help
 681           This option enables support for the Promise 20246, 20262, 20263,
 682           20265 and 20267 adapters.
 683
 684           If unsure, say N.
 685
 686 config PATA_RADISYS
 687         tristate "RADISYS 82600 PATA support (Experimental)"
 688         depends on PCI
 689         help
 690           This option enables support for the RADISYS 82600
 691           PATA controllers via the new ATA layer
 692
 693           If unsure, say N.
 694
 695 config PATA_RDC
 696         tristate "RDC PATA support"
 697         depends on PCI
 698         help
 699           This option enables basic support for the later RDC PATA controllers
 700           controllers via the new ATA layer. For the RDC 1010, you need to
 701           enable the IT821X driver instead.
 702
 703           If unsure, say N.
 704
 705 config PATA_SC1200
 706         tristate "SC1200 PATA support"
 707         depends on PCI && (X86_32 || COMPILE_TEST)
 708         help
 709           This option enables support for the NatSemi/AMD SC1200 SoC
 710           companion chip used with the Geode processor family.
 711
 712           If unsure, say N.
 713
 714 config PATA_SCC
 715         tristate "Toshiba's Cell Reference Set IDE support"
 716         depends on PCI && PPC_CELLEB
 717         help
 718           This option enables support for the built-in IDE controller on
 719           Toshiba Cell Reference Board.
 720
 721           If unsure, say N.
 722
 723 config PATA_SCH
 724         tristate "Intel SCH PATA support"
 725         depends on PCI
 726         help
 727           This option enables support for Intel SCH PATA on the Intel
 728           SCH (US15W, US15L, UL11L) series host controllers.
 729
 730           If unsure, say N.
 731
 732 config PATA_SERVERWORKS
 733         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
 734         depends on PCI
 735         help
 736           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
 737           HT1000 PATA controllers, via the new ATA layer.
 738
 739           If unsure, say N.
 740
 741 config PATA_SIL680
 742         tristate "CMD / Silicon Image 680 PATA support"
 743         depends on PCI
 744         help
 745           This option enables support for CMD / Silicon Image 680 PATA.
 746
 747           If unsure, say N.
 748
 749 config PATA_SIS
 750         tristate "SiS PATA support"
 751         depends on PCI
 752         help
 753           This option enables support for SiS PATA controllers
 754
 755           If unsure, say N.
 756
 757 config PATA_TOSHIBA
 758         tristate "Toshiba Piccolo support (Experimental)"
 759         depends on PCI
 760         help
 761           Support for the Toshiba Piccolo controllers. Currently only the
 762           primary channel is supported by this driver.
 763
 764           If unsure, say N.
 765
 766 config PATA_TRIFLEX
 767         tristate "Compaq Triflex PATA support"
 768         depends on PCI
 769         help
 770           Enable support for the Compaq 'Triflex' IDE controller as found
 771           on many Compaq Pentium-Pro systems, via the new ATA layer.
 772
 773           If unsure, say N.
 774
 775 config PATA_VIA
 776         tristate "VIA PATA support"
 777         depends on PCI
 778         help
 779           This option enables support for the VIA PATA interfaces
 780           found on the many VIA chipsets.
 781
 782           If unsure, say N.
 783
 784 config PATA_PXA
 785         tristate "PXA DMA-capable PATA support"
 786         depends on ARCH_PXA
 787         help
 788           This option enables support for harddrive attached to PXA CPU's bus.
 789
 790           NOTE: This driver utilizes PXA DMA controller, in case your hardware
 791                 is not capable of doing MWDMA, use pata_platform instead.
 792
 793           If unsure, say N.
 794
 795 config PATA_WINBOND
 796         tristate "Winbond SL82C105 PATA support"
 797         depends on PCI
 798         help
 799           This option enables support for SL82C105 PATA devices found in the
 800           Netwinder and some other systems
 801
 802           If unsure, say N.
 803
 804 endif # ATA_BMDMA
 805
 806 comment "PIO-only SFF controllers"
 807
 808 config PATA_AT32
 809         tristate "Atmel AVR32 PATA support (Experimental)"
 810         depends on AVR32 && PLATFORM_AT32AP
 811         help
 812           This option enables support for the IDE devices on the
 813           Atmel AT32AP platform.
 814
 815           If unsure, say N.
 816
 817 config PATA_AT91
 818         tristate "PATA support for AT91SAM9260"
 819         depends on ARM && ARCH_AT91
 820         help
 821           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
 822
 823           If unsure, say N.
 824
 825 config PATA_CMD640_PCI
 826         tristate "CMD640 PCI PATA support (Experimental)"
 827         depends on PCI
 828         help
 829           This option enables support for the CMD640 PCI IDE
 830           interface chip. Only the primary channel is currently
 831           supported.
 832
 833           If unsure, say N.
 834
 835 config PATA_ISAPNP
 836         tristate "ISA Plug and Play PATA support"
 837         depends on ISAPNP
 838         help
 839           This option enables support for ISA plug & play ATA
 840           controllers such as those found on old soundcards.
 841
 842           If unsure, say N.
 843
 844 config PATA_IXP4XX_CF
 845         tristate "IXP4XX Compact Flash support"
 846         depends on ARCH_IXP4XX
 847         help
 848           This option enables support for a Compact Flash connected on
 849           the ixp4xx expansion bus. This driver had been written for
 850           Loft/Avila boards in mind but can work with others.
 851
 852           If unsure, say N.
 853
 854 config PATA_MPIIX
 855         tristate "Intel PATA MPIIX support"
 856         depends on PCI
 857         help
 858           This option enables support for MPIIX PATA support.
 859
 860           If unsure, say N.
 861
 862 config PATA_NS87410
 863         tristate "Nat Semi NS87410 PATA support"
 864         depends on PCI
 865         help
 866           This option enables support for the National Semiconductor
 867           NS87410 PCI-IDE controller.
 868
 869           If unsure, say N.
 870
 871 config PATA_OPTI
 872         tristate "OPTI621/6215 PATA support (Very Experimental)"
 873         depends on PCI
 874         help
 875           This option enables full PIO support for the early Opti ATA
 876           controllers found on some old motherboards.
 877
 878           If unsure, say N.
 879
 880 config PATA_PALMLD
 881         tristate "Palm LifeDrive PATA support"
 882         depends on MACH_PALMLD
 883         help
 884           This option enables support for Palm LifeDrive's internal ATA
 885           port via the new ATA layer.
 886
 887           If unsure, say N.
 888
 889 config PATA_PCMCIA
 890         tristate "PCMCIA PATA support"
 891         depends on PCMCIA
 892         help
 893           This option enables support for PCMCIA ATA interfaces, including
 894           compact flash card adapters via the new ATA layer.
 895
 896           If unsure, say N.
 897
 898 config PATA_PLATFORM
 899         tristate "Generic platform device PATA support"
 900         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
 901         help
 902           This option enables support for generic directly connected ATA
 903           devices commonly found on embedded systems.
 904
 905           If unsure, say N.
 906
 907 config PATA_OF_PLATFORM
 908         tristate "OpenFirmware platform device PATA support"
 909         depends on PATA_PLATFORM && OF
 910         help
 911           This option enables support for generic directly connected ATA
 912           devices commonly found on embedded systems with OpenFirmware
 913           bindings.
 914
 915           If unsure, say N.
 916
 917 config PATA_QDI
 918         tristate "QDI VLB PATA support"
 919         depends on ISA
 920         select PATA_LEGACY
 921         help
 922           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
 923
 924 config PATA_RB532
 925         tristate "RouterBoard 532 PATA CompactFlash support"
 926         depends on MIKROTIK_RB532
 927         help
 928           This option enables support for the RouterBoard 532
 929           PATA CompactFlash controller.
 930
 931           If unsure, say N.
 932
 933 config PATA_RZ1000
 934         tristate "PC Tech RZ1000 PATA support"
 935         depends on PCI
 936         help
 937           This option enables basic support for the PC Tech RZ1000/1
 938           PATA controllers via the new ATA layer
 939
 940           If unsure, say N.
 941
 942 config PATA_SAMSUNG_CF
 943         tristate "Samsung SoC PATA support"
 944         depends on SAMSUNG_DEV_IDE
 945         help
 946           This option enables basic support for Samsung's S3C/S5P board
 947           PATA controllers via the new ATA layer
 948
 949           If unsure, say N.
 950
 951 config PATA_WINBOND_VLB
 952         tristate "Winbond W83759A VLB PATA support (Experimental)"
 953         depends on ISA
 954         select PATA_LEGACY
 955         help
 956           Support for the Winbond W83759A controller on Vesa Local Bus
 957           systems.
 958
 959 comment "Generic fallback / legacy drivers"
 960
 961 config PATA_ACPI
 962         tristate "ACPI firmware driver for PATA"
 963         depends on ATA_ACPI && ATA_BMDMA
 964         help
 965           This option enables an ACPI method driver which drives
 966           motherboard PATA controller interfaces through the ACPI
 967           firmware in the BIOS. This driver can sometimes handle
 968           otherwise unsupported hardware.
 969
 970 config ATA_GENERIC
 971         tristate "Generic ATA support"
 972         depends on PCI && ATA_BMDMA
 973         help
 974           This option enables support for generic BIOS configured
 975           ATA controllers via the new ATA layer
 976
 977           If unsure, say N.
 978
 979 config PATA_LEGACY
 980         tristate "Legacy ISA PATA support (Experimental)"
 981         depends on (ISA || PCI)
 982         help
 983           This option enables support for ISA/VLB/PCI bus legacy PATA
 984           ports and allows them to be accessed via the new ATA layer.
 985
 986           If unsure, say N.
 987
 988 endif # ATA_SFF
 989 endif # ATA