]> git.proxmox.com Git - mirror_ubuntu-jammy-kernel.git/blob - drivers/ata/ahci_mvebu.c
Merge tag 'audit-pr-20200226' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoor...
[mirror_ubuntu-jammy-kernel.git] / drivers / ata / ahci_mvebu.c
1 /*
2 * AHCI glue platform driver for Marvell EBU SOCs
3 *
4 * Copyright (C) 2014 Marvell
5 *
6 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
7 * Marcin Wojtas <mw@semihalf.com>
8 *
9 * This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 */
13
14 #include <linux/ahci_platform.h>
15 #include <linux/kernel.h>
16 #include <linux/mbus.h>
17 #include <linux/module.h>
18 #include <linux/of_device.h>
19 #include <linux/platform_device.h>
20 #include "ahci.h"
21
22 #define DRV_NAME "ahci-mvebu"
23
24 #define AHCI_VENDOR_SPECIFIC_0_ADDR 0xa0
25 #define AHCI_VENDOR_SPECIFIC_0_DATA 0xa4
26
27 #define AHCI_WINDOW_CTRL(win) (0x60 + ((win) << 4))
28 #define AHCI_WINDOW_BASE(win) (0x64 + ((win) << 4))
29 #define AHCI_WINDOW_SIZE(win) (0x68 + ((win) << 4))
30
31 struct ahci_mvebu_plat_data {
32 int (*plat_config)(struct ahci_host_priv *hpriv);
33 unsigned int flags;
34 };
35
36 static void ahci_mvebu_mbus_config(struct ahci_host_priv *hpriv,
37 const struct mbus_dram_target_info *dram)
38 {
39 int i;
40
41 for (i = 0; i < 4; i++) {
42 writel(0, hpriv->mmio + AHCI_WINDOW_CTRL(i));
43 writel(0, hpriv->mmio + AHCI_WINDOW_BASE(i));
44 writel(0, hpriv->mmio + AHCI_WINDOW_SIZE(i));
45 }
46
47 for (i = 0; i < dram->num_cs; i++) {
48 const struct mbus_dram_window *cs = dram->cs + i;
49
50 writel((cs->mbus_attr << 8) |
51 (dram->mbus_dram_target_id << 4) | 1,
52 hpriv->mmio + AHCI_WINDOW_CTRL(i));
53 writel(cs->base >> 16, hpriv->mmio + AHCI_WINDOW_BASE(i));
54 writel(((cs->size - 1) & 0xffff0000),
55 hpriv->mmio + AHCI_WINDOW_SIZE(i));
56 }
57 }
58
59 static void ahci_mvebu_regret_option(struct ahci_host_priv *hpriv)
60 {
61 /*
62 * Enable the regret bit to allow the SATA unit to regret a
63 * request that didn't receive an acknowlegde and avoid a
64 * deadlock
65 */
66 writel(0x4, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR);
67 writel(0x80, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
68 }
69
70 static int ahci_mvebu_armada_380_config(struct ahci_host_priv *hpriv)
71 {
72 const struct mbus_dram_target_info *dram;
73 int rc = 0;
74
75 dram = mv_mbus_dram_info();
76 if (dram)
77 ahci_mvebu_mbus_config(hpriv, dram);
78 else
79 rc = -ENODEV;
80
81 ahci_mvebu_regret_option(hpriv);
82
83 return rc;
84 }
85
86 static int ahci_mvebu_armada_3700_config(struct ahci_host_priv *hpriv)
87 {
88 u32 reg;
89
90 writel(0, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_ADDR);
91
92 reg = readl(hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
93 reg |= BIT(6);
94 writel(reg, hpriv->mmio + AHCI_VENDOR_SPECIFIC_0_DATA);
95
96 return 0;
97 }
98
99 /**
100 * ahci_mvebu_stop_engine
101 *
102 * @ap: Target ata port
103 *
104 * Errata Ref#226 - SATA Disk HOT swap issue when connected through
105 * Port Multiplier in FIS-based Switching mode.
106 *
107 * To avoid the issue, according to design, the bits[11:8, 0] of
108 * register PxFBS are cleared when Port Command and Status (0x18) bit[0]
109 * changes its value from 1 to 0, i.e. falling edge of Port
110 * Command and Status bit[0] sends PULSE that resets PxFBS
111 * bits[11:8; 0].
112 *
113 * This function is used to override function of "ahci_stop_engine"
114 * from libahci.c by adding the mvebu work around(WA) to save PxFBS
115 * value before the PxCMD ST write of 0, then restore PxFBS value.
116 *
117 * Return: 0 on success; Error code otherwise.
118 */
119 static int ahci_mvebu_stop_engine(struct ata_port *ap)
120 {
121 void __iomem *port_mmio = ahci_port_base(ap);
122 u32 tmp, port_fbs;
123
124 tmp = readl(port_mmio + PORT_CMD);
125
126 /* check if the HBA is idle */
127 if ((tmp & (PORT_CMD_START | PORT_CMD_LIST_ON)) == 0)
128 return 0;
129
130 /* save the port PxFBS register for later restore */
131 port_fbs = readl(port_mmio + PORT_FBS);
132
133 /* setting HBA to idle */
134 tmp &= ~PORT_CMD_START;
135 writel(tmp, port_mmio + PORT_CMD);
136
137 /*
138 * bit #15 PxCMD signal doesn't clear PxFBS,
139 * restore the PxFBS register right after clearing the PxCMD ST,
140 * no need to wait for the PxCMD bit #15.
141 */
142 writel(port_fbs, port_mmio + PORT_FBS);
143
144 /* wait for engine to stop. This could be as long as 500 msec */
145 tmp = ata_wait_register(ap, port_mmio + PORT_CMD,
146 PORT_CMD_LIST_ON, PORT_CMD_LIST_ON, 1, 500);
147 if (tmp & PORT_CMD_LIST_ON)
148 return -EIO;
149
150 return 0;
151 }
152
153 #ifdef CONFIG_PM_SLEEP
154 static int ahci_mvebu_suspend(struct platform_device *pdev, pm_message_t state)
155 {
156 return ahci_platform_suspend_host(&pdev->dev);
157 }
158
159 static int ahci_mvebu_resume(struct platform_device *pdev)
160 {
161 struct ata_host *host = platform_get_drvdata(pdev);
162 struct ahci_host_priv *hpriv = host->private_data;
163 const struct ahci_mvebu_plat_data *pdata = hpriv->plat_data;
164
165 pdata->plat_config(hpriv);
166
167 return ahci_platform_resume_host(&pdev->dev);
168 }
169 #else
170 #define ahci_mvebu_suspend NULL
171 #define ahci_mvebu_resume NULL
172 #endif
173
174 static const struct ata_port_info ahci_mvebu_port_info = {
175 .flags = AHCI_FLAG_COMMON,
176 .pio_mask = ATA_PIO4,
177 .udma_mask = ATA_UDMA6,
178 .port_ops = &ahci_platform_ops,
179 };
180
181 static struct scsi_host_template ahci_platform_sht = {
182 AHCI_SHT(DRV_NAME),
183 };
184
185 static int ahci_mvebu_probe(struct platform_device *pdev)
186 {
187 const struct ahci_mvebu_plat_data *pdata;
188 struct ahci_host_priv *hpriv;
189 int rc;
190
191 pdata = of_device_get_match_data(&pdev->dev);
192 if (!pdata)
193 return -EINVAL;
194
195 hpriv = ahci_platform_get_resources(pdev, 0);
196 if (IS_ERR(hpriv))
197 return PTR_ERR(hpriv);
198
199 hpriv->flags |= pdata->flags;
200 hpriv->plat_data = (void *)pdata;
201
202 rc = ahci_platform_enable_resources(hpriv);
203 if (rc)
204 return rc;
205
206 hpriv->stop_engine = ahci_mvebu_stop_engine;
207
208 rc = pdata->plat_config(hpriv);
209 if (rc)
210 goto disable_resources;
211
212 rc = ahci_platform_init_host(pdev, hpriv, &ahci_mvebu_port_info,
213 &ahci_platform_sht);
214 if (rc)
215 goto disable_resources;
216
217 return 0;
218
219 disable_resources:
220 ahci_platform_disable_resources(hpriv);
221 return rc;
222 }
223
224 static const struct ahci_mvebu_plat_data ahci_mvebu_armada_380_plat_data = {
225 .plat_config = ahci_mvebu_armada_380_config,
226 };
227
228 static const struct ahci_mvebu_plat_data ahci_mvebu_armada_3700_plat_data = {
229 .plat_config = ahci_mvebu_armada_3700_config,
230 .flags = AHCI_HFLAG_SUSPEND_PHYS,
231 };
232
233 static const struct of_device_id ahci_mvebu_of_match[] = {
234 {
235 .compatible = "marvell,armada-380-ahci",
236 .data = &ahci_mvebu_armada_380_plat_data,
237 },
238 {
239 .compatible = "marvell,armada-3700-ahci",
240 .data = &ahci_mvebu_armada_3700_plat_data,
241 },
242 { },
243 };
244 MODULE_DEVICE_TABLE(of, ahci_mvebu_of_match);
245
246 static struct platform_driver ahci_mvebu_driver = {
247 .probe = ahci_mvebu_probe,
248 .remove = ata_platform_remove_one,
249 .suspend = ahci_mvebu_suspend,
250 .resume = ahci_mvebu_resume,
251 .driver = {
252 .name = DRV_NAME,
253 .of_match_table = ahci_mvebu_of_match,
254 },
255 };
256 module_platform_driver(ahci_mvebu_driver);
257
258 MODULE_DESCRIPTION("Marvell EBU AHCI SATA driver");
259 MODULE_AUTHOR("Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, Marcin Wojtas <mw@semihalf.com>");
260 MODULE_LICENSE("GPL");
261 MODULE_ALIAS("platform:ahci_mvebu");