drivers/ata/pata_pdc2027x.c

   1 /*
   2  *  Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277.
   3  *
   4  *  This program is free software; you can redistribute it and/or
   5  *  modify it under the terms of the GNU General Public License
   6  *  as published by the Free Software Foundation; either version
   7  *  2 of the License, or (at your option) any later version.
   8  *
   9  *  Ported to libata by:
  10  *  Albert Lee <albertcc@tw.ibm.com> IBM Corporation
  11  *
  12  *  Copyright (C) 1998-2002             Andre Hedrick <andre@linux-ide.org>
  13  *  Portions Copyright (C) 1999 Promise Technology, Inc.
  14  *
  15  *  Author: Frank Tiernan (frankt@promise.com)
  16  *  Released under terms of General Public License
  17  *
  18  *
  19  *  libata documentation is available via 'make {ps|pdf}docs',
  20  *  as Documentation/DocBook/libata.*
  21  *
  22  *  Hardware information only available under NDA.
  23  *
  24  */
  25 #include <linux/kernel.h>
  26 #include <linux/module.h>
  27 #include <linux/pci.h>
  28 #include <linux/init.h>
  29 #include <linux/blkdev.h>
  30 #include <linux/delay.h>
  31 #include <linux/device.h>
  32 #include <scsi/scsi.h>
  33 #include <scsi/scsi_host.h>
  34 #include <scsi/scsi_cmnd.h>
  35 #include <linux/libata.h>
  36
  37 #define DRV_NAME        "pata_pdc2027x"
  38 #define DRV_VERSION     "1.0"
  39 #undef PDC_DEBUG
  40
  41 #ifdef PDC_DEBUG
  42 #define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
  43 #else
  44 #define PDPRINTK(fmt, args...)
  45 #endif
  46
  47 enum {
  48         PDC_MMIO_BAR            = 5,
  49
  50         PDC_UDMA_100            = 0,
  51         PDC_UDMA_133            = 1,
  52
  53         PDC_100_MHZ             = 100000000,
  54         PDC_133_MHZ             = 133333333,
  55
  56         PDC_SYS_CTL             = 0x1100,
  57         PDC_ATA_CTL             = 0x1104,
  58         PDC_GLOBAL_CTL          = 0x1108,
  59         PDC_CTCR0               = 0x110C,
  60         PDC_CTCR1               = 0x1110,
  61         PDC_BYTE_COUNT          = 0x1120,
  62         PDC_PLL_CTL             = 0x1202,
  63 };
  64
  65 static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  66 static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
  67 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
  68 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
  69 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
  70 static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
  71 static int pdc2027x_cable_detect(struct ata_port *ap);
  72 static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
  73
  74 /*
  75  * ATA Timing Tables based on 133MHz controller clock.
  76  * These tables are only used when the controller is in 133MHz clock.
  77  * If the controller is in 100MHz clock, the ASIC hardware will
  78  * set the timing registers automatically when "set feature" command
  79  * is issued to the device. However, if the controller clock is 133MHz,
  80  * the following tables must be used.
  81  */
  82 static struct pdc2027x_pio_timing {
  83         u8 value0, value1, value2;
  84 } pdc2027x_pio_timing_tbl [] = {
  85         { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
  86         { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */
  87         { 0x23, 0x26, 0x64 }, /* PIO mode 2 */
  88         { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
  89         { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
  90 };
  91
  92 static struct pdc2027x_mdma_timing {
  93         u8 value0, value1;
  94 } pdc2027x_mdma_timing_tbl [] = {
  95         { 0xdf, 0x5f }, /* MDMA mode 0 */
  96         { 0x6b, 0x27 }, /* MDMA mode 1 */
  97         { 0x69, 0x25 }, /* MDMA mode 2 */
  98 };
  99
 100 static struct pdc2027x_udma_timing {
 101         u8 value0, value1, value2;
 102 } pdc2027x_udma_timing_tbl [] = {
 103         { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
 104         { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
 105         { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
 106         { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
 107         { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
 108         { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
 109         { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
 110 };
 111
 112 static const struct pci_device_id pdc2027x_pci_tbl[] = {
 113         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 },
 114         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 },
 115         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 },
 116         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 },
 117         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 },
 118         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 },
 119         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 },
 120
 121         { }     /* terminate list */
 122 };
 123
 124 static struct pci_driver pdc2027x_pci_driver = {
 125         .name                   = DRV_NAME,
 126         .id_table               = pdc2027x_pci_tbl,
 127         .probe                  = pdc2027x_init_one,
 128         .remove                 = ata_pci_remove_one,
 129 };
 130
 131 static struct scsi_host_template pdc2027x_sht = {
 132         ATA_BMDMA_SHT(DRV_NAME),
 133 };
 134
 135 static struct ata_port_operations pdc2027x_pata100_ops = {
 136         .inherits               = &ata_bmdma_port_ops,
 137         .check_atapi_dma        = pdc2027x_check_atapi_dma,
 138         .cable_detect           = pdc2027x_cable_detect,
 139         .prereset               = pdc2027x_prereset,
 140 };
 141
 142 static struct ata_port_operations pdc2027x_pata133_ops = {
 143         .inherits               = &pdc2027x_pata100_ops,
 144         .mode_filter            = pdc2027x_mode_filter,
 145         .set_piomode            = pdc2027x_set_piomode,
 146         .set_dmamode            = pdc2027x_set_dmamode,
 147         .set_mode               = pdc2027x_set_mode,
 148 };
 149
 150 static struct ata_port_info pdc2027x_port_info[] = {
 151         /* PDC_UDMA_100 */
 152         {
 153                 .flags          = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 154                                   ATA_FLAG_MMIO,
 155                 .pio_mask       = 0x1f, /* pio0-4 */
 156                 .mwdma_mask     = 0x07, /* mwdma0-2 */
 157                 .udma_mask      = ATA_UDMA5, /* udma0-5 */
 158                 .port_ops       = &pdc2027x_pata100_ops,
 159         },
 160         /* PDC_UDMA_133 */
 161         {
 162                 .flags          = ATA_FLAG_NO_LEGACY | ATA_FLAG_SLAVE_POSS |
 163                                   ATA_FLAG_MMIO,
 164                 .pio_mask       = 0x1f, /* pio0-4 */
 165                 .mwdma_mask     = 0x07, /* mwdma0-2 */
 166                 .udma_mask      = ATA_UDMA6, /* udma0-6 */
 167                 .port_ops       = &pdc2027x_pata133_ops,
 168         },
 169 };
 170
 171 MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee");
 172 MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277");
 173 MODULE_LICENSE("GPL");
 174 MODULE_VERSION(DRV_VERSION);
 175 MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl);
 176
 177 /**
 178  *      port_mmio - Get the MMIO address of PDC2027x extended registers
 179  *      @ap: Port
 180  *      @offset: offset from mmio base
 181  */
 182 static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset)
 183 {
 184         return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset;
 185 }
 186
 187 /**
 188  *      dev_mmio - Get the MMIO address of PDC2027x extended registers
 189  *      @ap: Port
 190  *      @adev: device
 191  *      @offset: offset from mmio base
 192  */
 193 static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset)
 194 {
 195         u8 adj = (adev->devno) ? 0x08 : 0x00;
 196         return port_mmio(ap, offset) + adj;
 197 }
 198
 199 /**
 200  *      pdc2027x_pata_cable_detect - Probe host controller cable detect info
 201  *      @ap: Port for which cable detect info is desired
 202  *
 203  *      Read 80c cable indicator from Promise extended register.
 204  *      This register is latched when the system is reset.
 205  *
 206  *      LOCKING:
 207  *      None (inherited from caller).
 208  */
 209 static int pdc2027x_cable_detect(struct ata_port *ap)
 210 {
 211         u32 cgcr;
 212
 213         /* check cable detect results */
 214         cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL));
 215         if (cgcr & (1 << 26))
 216                 goto cbl40;
 217
 218         PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
 219
 220         return ATA_CBL_PATA80;
 221 cbl40:
 222         printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
 223         return ATA_CBL_PATA40;
 224 }
 225
 226 /**
 227  * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled.
 228  * @ap: Port to check
 229  */
 230 static inline int pdc2027x_port_enabled(struct ata_port *ap)
 231 {
 232         return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
 233 }
 234
 235 /**
 236  *      pdc2027x_prereset - prereset for PATA host controller
 237  *      @link: Target link
 238  *      @deadline: deadline jiffies for the operation
 239  *
 240  *      Probeinit including cable detection.
 241  *
 242  *      LOCKING:
 243  *      None (inherited from caller).
 244  */
 245
 246 static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
 247 {
 248         /* Check whether port enabled */
 249         if (!pdc2027x_port_enabled(link->ap))
 250                 return -ENOENT;
 251         return ata_sff_prereset(link, deadline);
 252 }
 253
 254 /**
 255  *      pdc2720x_mode_filter    -       mode selection filter
 256  *      @adev: ATA device
 257  *      @mask: list of modes proposed
 258  *
 259  *      Block UDMA on devices that cause trouble with this controller.
 260  */
 261
 262 static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
 263 {
 264         unsigned char model_num[ATA_ID_PROD_LEN + 1];
 265         struct ata_device *pair = ata_dev_pair(adev);
 266
 267         if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
 268                 return ata_bmdma_mode_filter(adev, mask);
 269
 270         /* Check for slave of a Maxtor at UDMA6 */
 271         ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
 272                           ATA_ID_PROD_LEN + 1);
 273         /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
 274         if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
 275                 mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
 276
 277         return ata_bmdma_mode_filter(adev, mask);
 278 }
 279
 280 /**
 281  *      pdc2027x_set_piomode - Initialize host controller PATA PIO timings
 282  *      @ap: Port to configure
 283  *      @adev: um
 284  *      @pio: PIO mode, 0 - 4
 285  *
 286  *      Set PIO mode for device.
 287  *
 288  *      LOCKING:
 289  *      None (inherited from caller).
 290  */
 291
 292 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 293 {
 294         unsigned int pio = adev->pio_mode - XFER_PIO_0;
 295         u32 ctcr0, ctcr1;
 296
 297         PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode);
 298
 299         /* Sanity check */
 300         if (pio > 4) {
 301                 printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio);
 302                 return;
 303
 304         }
 305
 306         /* Set the PIO timing registers using value table for 133MHz */
 307         PDPRINTK("Set pio regs... \n");
 308
 309         ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 310         ctcr0 &= 0xffff0000;
 311         ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 |
 312                 (pdc2027x_pio_timing_tbl[pio].value1 << 8);
 313         iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
 314
 315         ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 316         ctcr1 &= 0x00ffffff;
 317         ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
 318         iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 319
 320         PDPRINTK("Set pio regs done\n");
 321
 322         PDPRINTK("Set to pio mode[%u] \n", pio);
 323 }
 324
 325 /**
 326  *      pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
 327  *      @ap: Port to configure
 328  *      @adev: um
 329  *      @udma: udma mode, XFER_UDMA_0 to XFER_UDMA_6
 330  *
 331  *      Set UDMA mode for device.
 332  *
 333  *      LOCKING:
 334  *      None (inherited from caller).
 335  */
 336 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 337 {
 338         unsigned int dma_mode = adev->dma_mode;
 339         u32 ctcr0, ctcr1;
 340
 341         if ((dma_mode >= XFER_UDMA_0) &&
 342            (dma_mode <= XFER_UDMA_6)) {
 343                 /* Set the UDMA timing registers with value table for 133MHz */
 344                 unsigned int udma_mode = dma_mode & 0x07;
 345
 346                 if (dma_mode == XFER_UDMA_2) {
 347                         /*
 348                          * Turn off tHOLD.
 349                          * If tHOLD is '1', the hardware will add half clock for data hold time.
 350                          * This code segment seems to be no effect. tHOLD will be overwritten below.
 351                          */
 352                         ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 353                         iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
 354                 }
 355
 356                 PDPRINTK("Set udma regs... \n");
 357
 358                 ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 359                 ctcr1 &= 0xff000000;
 360                 ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 |
 361                         (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) |
 362                         (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
 363                 iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 364
 365                 PDPRINTK("Set udma regs done\n");
 366
 367                 PDPRINTK("Set to udma mode[%u] \n", udma_mode);
 368
 369         } else  if ((dma_mode >= XFER_MW_DMA_0) &&
 370                    (dma_mode <= XFER_MW_DMA_2)) {
 371                 /* Set the MDMA timing registers with value table for 133MHz */
 372                 unsigned int mdma_mode = dma_mode & 0x07;
 373
 374                 PDPRINTK("Set mdma regs... \n");
 375                 ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 376
 377                 ctcr0 &= 0x0000ffff;
 378                 ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) |
 379                         (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
 380
 381                 iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
 382                 PDPRINTK("Set mdma regs done\n");
 383
 384                 PDPRINTK("Set to mdma mode[%u] \n", mdma_mode);
 385         } else {
 386                 printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode);
 387         }
 388 }
 389
 390 /**
 391  *      pdc2027x_set_mode - Set the timing registers back to correct values.
 392  *      @link: link to configure
 393  *      @r_failed: Returned device for failure
 394  *
 395  *      The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
 396  *      automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
 397  *      This function overwrites the possibly incorrect values set by the hardware to be correct.
 398  */
 399 static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
 400 {
 401         struct ata_port *ap = link->ap;
 402         struct ata_device *dev;
 403         int rc;
 404
 405         rc = ata_do_set_mode(link, r_failed);
 406         if (rc < 0)
 407                 return rc;
 408
 409         ata_link_for_each_dev(dev, link) {
 410                 if (ata_dev_enabled(dev)) {
 411
 412                         pdc2027x_set_piomode(ap, dev);
 413
 414                         /*
 415                          * Enable prefetch if the device support PIO only.
 416                          */
 417                         if (dev->xfer_shift == ATA_SHIFT_PIO) {
 418                                 u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
 419                                 ctcr1 |= (1 << 25);
 420                                 iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
 421
 422                                 PDPRINTK("Turn on prefetch\n");
 423                         } else {
 424                                 pdc2027x_set_dmamode(ap, dev);
 425                         }
 426                 }
 427         }
 428         return 0;
 429 }
 430
 431 /**
 432  *      pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
 433  *      @qc: Metadata associated with taskfile to check
 434  *
 435  *      LOCKING:
 436  *      None (inherited from caller).
 437  *
 438  *      RETURNS: 0 when ATAPI DMA can be used
 439  *               1 otherwise
 440  */
 441 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
 442 {
 443         struct scsi_cmnd *cmd = qc->scsicmd;
 444         u8 *scsicmd = cmd->cmnd;
 445         int rc = 1; /* atapi dma off by default */
 446
 447         /*
 448          * This workaround is from Promise's GPL driver.
 449          * If ATAPI DMA is used for commands not in the
 450          * following white list, say MODE_SENSE and REQUEST_SENSE,
 451          * pdc2027x might hit the irq lost problem.
 452          */
 453         switch (scsicmd[0]) {
 454         case READ_10:
 455         case WRITE_10:
 456         case READ_12:
 457         case WRITE_12:
 458         case READ_6:
 459         case WRITE_6:
 460         case 0xad: /* READ_DVD_STRUCTURE */
 461         case 0xbe: /* READ_CD */
 462                 /* ATAPI DMA is ok */
 463                 rc = 0;
 464                 break;
 465         default:
 466                 ;
 467         }
 468
 469         return rc;
 470 }
 471
 472 /**
 473  * pdc_read_counter - Read the ctr counter
 474  * @host: target ATA host
 475  */
 476
 477 static long pdc_read_counter(struct ata_host *host)
 478 {
 479         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 480         long counter;
 481         int retry = 1;
 482         u32 bccrl, bccrh, bccrlv, bccrhv;
 483
 484 retry:
 485         bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
 486         bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 487
 488         /* Read the counter values again for verification */
 489         bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
 490         bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 491
 492         counter = (bccrh << 15) | bccrl;
 493
 494         PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh,  bccrl);
 495         PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
 496
 497         /*
 498          * The 30-bit decreasing counter are read by 2 pieces.
 499          * Incorrect value may be read when both bccrh and bccrl are changing.
 500          * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read.
 501          */
 502         if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) {
 503                 retry--;
 504                 PDPRINTK("rereading counter\n");
 505                 goto retry;
 506         }
 507
 508         return counter;
 509 }
 510
 511 /**
 512  * adjust_pll - Adjust the PLL input clock in Hz.
 513  *
 514  * @pdc_controller: controller specific information
 515  * @host: target ATA host
 516  * @pll_clock: The input of PLL in HZ
 517  */
 518 static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
 519 {
 520         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 521         u16 pll_ctl;
 522         long pll_clock_khz = pll_clock / 1000;
 523         long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
 524         long ratio = pout_required / pll_clock_khz;
 525         int F, R;
 526
 527         /* Sanity check */
 528         if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) {
 529                 printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz);
 530                 return;
 531         }
 532
 533 #ifdef PDC_DEBUG
 534         PDPRINTK("pout_required is %ld\n", pout_required);
 535
 536         /* Show the current clock value of PLL control register
 537          * (maybe already configured by the firmware)
 538          */
 539         pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 540
 541         PDPRINTK("pll_ctl[%X]\n", pll_ctl);
 542 #endif
 543
 544         /*
 545          * Calculate the ratio of F, R and OD
 546          * POUT = (F + 2) / (( R + 2) * NO)
 547          */
 548         if (ratio < 8600L) { /* 8.6x */
 549                 /* Using NO = 0x01, R = 0x0D */
 550                 R = 0x0d;
 551         } else if (ratio < 12900L) { /* 12.9x */
 552                 /* Using NO = 0x01, R = 0x08 */
 553                 R = 0x08;
 554         } else if (ratio < 16100L) { /* 16.1x */
 555                 /* Using NO = 0x01, R = 0x06 */
 556                 R = 0x06;
 557         } else if (ratio < 64000L) { /* 64x */
 558                 R = 0x00;
 559         } else {
 560                 /* Invalid ratio */
 561                 printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio);
 562                 return;
 563         }
 564
 565         F = (ratio * (R+2)) / 1000 - 2;
 566
 567         if (unlikely(F < 0 || F > 127)) {
 568                 /* Invalid F */
 569                 printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F);
 570                 return;
 571         }
 572
 573         PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio);
 574
 575         pll_ctl = (R << 8) | F;
 576
 577         PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
 578
 579         iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
 580         ioread16(mmio_base + PDC_PLL_CTL); /* flush */
 581
 582         /* Wait the PLL circuit to be stable */
 583         mdelay(30);
 584
 585 #ifdef PDC_DEBUG
 586         /*
 587          *  Show the current clock value of PLL control register
 588          * (maybe configured by the firmware)
 589          */
 590         pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 591
 592         PDPRINTK("pll_ctl[%X]\n", pll_ctl);
 593 #endif
 594
 595         return;
 596 }
 597
 598 /**
 599  * detect_pll_input_clock - Detect the PLL input clock in Hz.
 600  * @host: target ATA host
 601  * Ex. 16949000 on 33MHz PCI bus for pdc20275.
 602  *     Half of the PCI clock.
 603  */
 604 static long pdc_detect_pll_input_clock(struct ata_host *host)
 605 {
 606         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 607         u32 scr;
 608         long start_count, end_count;
 609         struct timeval start_time, end_time;
 610         long pll_clock, usec_elapsed;
 611
 612         /* Start the test mode */
 613         scr = ioread32(mmio_base + PDC_SYS_CTL);
 614         PDPRINTK("scr[%X]\n", scr);
 615         iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
 616         ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 617
 618         /* Read current counter value */
 619         start_count = pdc_read_counter(host);
 620         do_gettimeofday(&start_time);
 621
 622         /* Let the counter run for 100 ms. */
 623         mdelay(100);
 624
 625         /* Read the counter values again */
 626         end_count = pdc_read_counter(host);
 627         do_gettimeofday(&end_time);
 628
 629         /* Stop the test mode */
 630         scr = ioread32(mmio_base + PDC_SYS_CTL);
 631         PDPRINTK("scr[%X]\n", scr);
 632         iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
 633         ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 634
 635         /* calculate the input clock in Hz */
 636         usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
 637                 (end_time.tv_usec - start_time.tv_usec);
 638
 639         pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
 640                 (100000000 / usec_elapsed);
 641
 642         PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
 643         PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
 644
 645         return pll_clock;
 646 }
 647
 648 /**
 649  * pdc_hardware_init - Initialize the hardware.
 650  * @host: target ATA host
 651  * @board_idx: board identifier
 652  */
 653 static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 654 {
 655         long pll_clock;
 656
 657         /*
 658          * Detect PLL input clock rate.
 659          * On some system, where PCI bus is running at non-standard clock rate.
 660          * Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
 661          * The pdc20275 controller employs PLL circuit to help correct timing registers setting.
 662          */
 663         pll_clock = pdc_detect_pll_input_clock(host);
 664
 665         dev_printk(KERN_INFO, host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
 666
 667         /* Adjust PLL control register */
 668         pdc_adjust_pll(host, pll_clock, board_idx);
 669
 670         return 0;
 671 }
 672
 673 /**
 674  * pdc_ata_setup_port - setup the mmio address
 675  * @port: ata ioports to setup
 676  * @base: base address
 677  */
 678 static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
 679 {
 680         port->cmd_addr          =
 681         port->data_addr         = base;
 682         port->feature_addr      =
 683         port->error_addr        = base + 0x05;
 684         port->nsect_addr        = base + 0x0a;
 685         port->lbal_addr         = base + 0x0f;
 686         port->lbam_addr         = base + 0x10;
 687         port->lbah_addr         = base + 0x15;
 688         port->device_addr       = base + 0x1a;
 689         port->command_addr      =
 690         port->status_addr       = base + 0x1f;
 691         port->altstatus_addr    =
 692         port->ctl_addr          = base + 0x81a;
 693 }
 694
 695 /**
 696  * pdc2027x_init_one - PCI probe function
 697  * Called when an instance of PCI adapter is inserted.
 698  * This function checks whether the hardware is supported,
 699  * initialize hardware and register an instance of ata_host to
 700  * libata.  (implements struct pci_driver.probe() )
 701  *
 702  * @pdev: instance of pci_dev found
 703  * @ent:  matching entry in the id_tbl[]
 704  */
 705 static int __devinit pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 706 {
 707         static int printed_version;
 708         static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
 709         static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
 710         unsigned int board_idx = (unsigned int) ent->driver_data;
 711         const struct ata_port_info *ppi[] =
 712                 { &pdc2027x_port_info[board_idx], NULL };
 713         struct ata_host *host;
 714         void __iomem *mmio_base;
 715         int i, rc;
 716
 717         if (!printed_version++)
 718                 dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 719
 720         /* alloc host */
 721         host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
 722         if (!host)
 723                 return -ENOMEM;
 724
 725         /* acquire resources and fill host */
 726         rc = pcim_enable_device(pdev);
 727         if (rc)
 728                 return rc;
 729
 730         rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
 731         if (rc)
 732                 return rc;
 733         host->iomap = pcim_iomap_table(pdev);
 734
 735         rc = pci_set_dma_mask(pdev, ATA_DMA_MASK);
 736         if (rc)
 737                 return rc;
 738
 739         rc = pci_set_consistent_dma_mask(pdev, ATA_DMA_MASK);
 740         if (rc)
 741                 return rc;
 742
 743         mmio_base = host->iomap[PDC_MMIO_BAR];
 744
 745         for (i = 0; i < 2; i++) {
 746                 struct ata_port *ap = host->ports[i];
 747
 748                 pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
 749                 ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
 750
 751                 ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
 752                 ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
 753         }
 754
 755         //pci_enable_intx(pdev);
 756
 757         /* initialize adapter */
 758         if (pdc_hardware_init(host, board_idx) != 0)
 759                 return -EIO;
 760
 761         pci_set_master(pdev);
 762         return ata_host_activate(host, pdev->irq, ata_sff_interrupt,
 763                                  IRQF_SHARED, &pdc2027x_sht);
 764 }
 765
 766 /**
 767  * pdc2027x_init - Called after this module is loaded into the kernel.
 768  */
 769 static int __init pdc2027x_init(void)
 770 {
 771         return pci_register_driver(&pdc2027x_pci_driver);
 772 }
 773
 774 /**
 775  * pdc2027x_exit - Called before this module unloaded from the kernel
 776  */
 777 static void __exit pdc2027x_exit(void)
 778 {
 779         pci_unregister_driver(&pdc2027x_pci_driver);
 780 }
 781
 782 module_init(pdc2027x_init);
 783 module_exit(pdc2027x_exit);