drivers/ata/pata_pdc2027x.c

   1 // SPDX-License-Identifier: GPL-2.0-or-later
   2 /*
   3  *  Promise PATA TX2/TX4/TX2000/133 IDE driver for pdc20268 to pdc20277.
   4  *
   5  *  Ported to libata by:
   6  *  Albert Lee <albertcc@tw.ibm.com> IBM Corporation
   7  *
   8  *  Copyright (C) 1998-2002             Andre Hedrick <andre@linux-ide.org>
   9  *  Portions Copyright (C) 1999 Promise Technology, Inc.
  10  *
  11  *  Author: Frank Tiernan (frankt@promise.com)
  12  *  Released under terms of General Public License
  13  *
  14  *  libata documentation is available via 'make {ps|pdf}docs',
  15  *  as Documentation/driver-api/libata.rst
  16  *
  17  *  Hardware information only available under NDA.
  18  */
  19 #include <linux/kernel.h>
  20 #include <linux/module.h>
  21 #include <linux/pci.h>
  22 #include <linux/blkdev.h>
  23 #include <linux/delay.h>
  24 #include <linux/device.h>
  25 #include <linux/ktime.h>
  26 #include <scsi/scsi.h>
  27 #include <scsi/scsi_host.h>
  28 #include <scsi/scsi_cmnd.h>
  29 #include <linux/libata.h>
  30
  31 #define DRV_NAME        "pata_pdc2027x"
  32 #define DRV_VERSION     "1.0"
  33 #undef PDC_DEBUG
  34
  35 #ifdef PDC_DEBUG
  36 #define PDPRINTK(fmt, args...) printk(KERN_ERR "%s: " fmt, __func__, ## args)
  37 #else
  38 #define PDPRINTK(fmt, args...)
  39 #endif
  40
  41 enum {
  42         PDC_MMIO_BAR            = 5,
  43
  44         PDC_UDMA_100            = 0,
  45         PDC_UDMA_133            = 1,
  46
  47         PDC_100_MHZ             = 100000000,
  48         PDC_133_MHZ             = 133333333,
  49
  50         PDC_SYS_CTL             = 0x1100,
  51         PDC_ATA_CTL             = 0x1104,
  52         PDC_GLOBAL_CTL          = 0x1108,
  53         PDC_CTCR0               = 0x110C,
  54         PDC_CTCR1               = 0x1110,
  55         PDC_BYTE_COUNT          = 0x1120,
  56         PDC_PLL_CTL             = 0x1202,
  57 };
  58
  59 static int pdc2027x_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
  60 #ifdef CONFIG_PM_SLEEP
  61 static int pdc2027x_reinit_one(struct pci_dev *pdev);
  62 #endif
  63 static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline);
  64 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev);
  65 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev);
  66 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc);
  67 static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask);
  68 static int pdc2027x_cable_detect(struct ata_port *ap);
  69 static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed);
  70
  71 /*
  72  * ATA Timing Tables based on 133MHz controller clock.
  73  * These tables are only used when the controller is in 133MHz clock.
  74  * If the controller is in 100MHz clock, the ASIC hardware will
  75  * set the timing registers automatically when "set feature" command
  76  * is issued to the device. However, if the controller clock is 133MHz,
  77  * the following tables must be used.
  78  */
  79 static const struct pdc2027x_pio_timing {
  80         u8 value0, value1, value2;
  81 } pdc2027x_pio_timing_tbl[] = {
  82         { 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
  83         { 0x46, 0x29, 0xa4 }, /* PIO mode 1 */
  84         { 0x23, 0x26, 0x64 }, /* PIO mode 2 */
  85         { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
  86         { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
  87 };
  88
  89 static const struct pdc2027x_mdma_timing {
  90         u8 value0, value1;
  91 } pdc2027x_mdma_timing_tbl[] = {
  92         { 0xdf, 0x5f }, /* MDMA mode 0 */
  93         { 0x6b, 0x27 }, /* MDMA mode 1 */
  94         { 0x69, 0x25 }, /* MDMA mode 2 */
  95 };
  96
  97 static const struct pdc2027x_udma_timing {
  98         u8 value0, value1, value2;
  99 } pdc2027x_udma_timing_tbl[] = {
 100         { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
 101         { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
 102         { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
 103         { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
 104         { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
 105         { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
 106         { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
 107 };
 108
 109 static const struct pci_device_id pdc2027x_pci_tbl[] = {
 110         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), PDC_UDMA_100 },
 111         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), PDC_UDMA_133 },
 112         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), PDC_UDMA_100 },
 113         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), PDC_UDMA_133 },
 114         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), PDC_UDMA_133 },
 115         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), PDC_UDMA_133 },
 116         { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), PDC_UDMA_133 },
 117
 118         { }     /* terminate list */
 119 };
 120
 121 static struct pci_driver pdc2027x_pci_driver = {
 122         .name                   = DRV_NAME,
 123         .id_table               = pdc2027x_pci_tbl,
 124         .probe                  = pdc2027x_init_one,
 125         .remove                 = ata_pci_remove_one,
 126 #ifdef CONFIG_PM_SLEEP
 127         .suspend                = ata_pci_device_suspend,
 128         .resume                 = pdc2027x_reinit_one,
 129 #endif
 130 };
 131
 132 static struct scsi_host_template pdc2027x_sht = {
 133         ATA_BMDMA_SHT(DRV_NAME),
 134 };
 135
 136 static struct ata_port_operations pdc2027x_pata100_ops = {
 137         .inherits               = &ata_bmdma_port_ops,
 138         .check_atapi_dma        = pdc2027x_check_atapi_dma,
 139         .cable_detect           = pdc2027x_cable_detect,
 140         .prereset               = pdc2027x_prereset,
 141 };
 142
 143 static struct ata_port_operations pdc2027x_pata133_ops = {
 144         .inherits               = &pdc2027x_pata100_ops,
 145         .mode_filter            = pdc2027x_mode_filter,
 146         .set_piomode            = pdc2027x_set_piomode,
 147         .set_dmamode            = pdc2027x_set_dmamode,
 148         .set_mode               = pdc2027x_set_mode,
 149 };
 150
 151 static struct ata_port_info pdc2027x_port_info[] = {
 152         /* PDC_UDMA_100 */
 153         {
 154                 .flags          = ATA_FLAG_SLAVE_POSS,
 155                 .pio_mask       = ATA_PIO4,
 156                 .mwdma_mask     = ATA_MWDMA2,
 157                 .udma_mask      = ATA_UDMA5,
 158                 .port_ops       = &pdc2027x_pata100_ops,
 159         },
 160         /* PDC_UDMA_133 */
 161         {
 162                 .flags          = ATA_FLAG_SLAVE_POSS,
 163                 .pio_mask       = ATA_PIO4,
 164                 .mwdma_mask     = ATA_MWDMA2,
 165                 .udma_mask      = ATA_UDMA6,
 166                 .port_ops       = &pdc2027x_pata133_ops,
 167         },
 168 };
 169
 170 MODULE_AUTHOR("Andre Hedrick, Frank Tiernan, Albert Lee");
 171 MODULE_DESCRIPTION("libata driver module for Promise PDC20268 to PDC20277");
 172 MODULE_LICENSE("GPL");
 173 MODULE_VERSION(DRV_VERSION);
 174 MODULE_DEVICE_TABLE(pci, pdc2027x_pci_tbl);
 175
 176 /**
 177  *      port_mmio - Get the MMIO address of PDC2027x extended registers
 178  *      @ap: Port
 179  *      @offset: offset from mmio base
 180  */
 181 static inline void __iomem *port_mmio(struct ata_port *ap, unsigned int offset)
 182 {
 183         return ap->host->iomap[PDC_MMIO_BAR] + ap->port_no * 0x100 + offset;
 184 }
 185
 186 /**
 187  *      dev_mmio - Get the MMIO address of PDC2027x extended registers
 188  *      @ap: Port
 189  *      @adev: device
 190  *      @offset: offset from mmio base
 191  */
 192 static inline void __iomem *dev_mmio(struct ata_port *ap, struct ata_device *adev, unsigned int offset)
 193 {
 194         u8 adj = (adev->devno) ? 0x08 : 0x00;
 195         return port_mmio(ap, offset) + adj;
 196 }
 197
 198 /**
 199  *      pdc2027x_pata_cable_detect - Probe host controller cable detect info
 200  *      @ap: Port for which cable detect info is desired
 201  *
 202  *      Read 80c cable indicator from Promise extended register.
 203  *      This register is latched when the system is reset.
 204  *
 205  *      LOCKING:
 206  *      None (inherited from caller).
 207  */
 208 static int pdc2027x_cable_detect(struct ata_port *ap)
 209 {
 210         u32 cgcr;
 211
 212         /* check cable detect results */
 213         cgcr = ioread32(port_mmio(ap, PDC_GLOBAL_CTL));
 214         if (cgcr & (1 << 26))
 215                 goto cbl40;
 216
 217         PDPRINTK("No cable or 80-conductor cable on port %d\n", ap->port_no);
 218
 219         return ATA_CBL_PATA80;
 220 cbl40:
 221         printk(KERN_INFO DRV_NAME ": 40-conductor cable detected on port %d\n", ap->port_no);
 222         return ATA_CBL_PATA40;
 223 }
 224
 225 /**
 226  * pdc2027x_port_enabled - Check PDC ATA control register to see whether the port is enabled.
 227  * @ap: Port to check
 228  */
 229 static inline int pdc2027x_port_enabled(struct ata_port *ap)
 230 {
 231         return ioread8(port_mmio(ap, PDC_ATA_CTL)) & 0x02;
 232 }
 233
 234 /**
 235  *      pdc2027x_prereset - prereset for PATA host controller
 236  *      @link: Target link
 237  *      @deadline: deadline jiffies for the operation
 238  *
 239  *      Probeinit including cable detection.
 240  *
 241  *      LOCKING:
 242  *      None (inherited from caller).
 243  */
 244
 245 static int pdc2027x_prereset(struct ata_link *link, unsigned long deadline)
 246 {
 247         /* Check whether port enabled */
 248         if (!pdc2027x_port_enabled(link->ap))
 249                 return -ENOENT;
 250         return ata_sff_prereset(link, deadline);
 251 }
 252
 253 /**
 254  *      pdc2720x_mode_filter    -       mode selection filter
 255  *      @adev: ATA device
 256  *      @mask: list of modes proposed
 257  *
 258  *      Block UDMA on devices that cause trouble with this controller.
 259  */
 260
 261 static unsigned long pdc2027x_mode_filter(struct ata_device *adev, unsigned long mask)
 262 {
 263         unsigned char model_num[ATA_ID_PROD_LEN + 1];
 264         struct ata_device *pair = ata_dev_pair(adev);
 265
 266         if (adev->class != ATA_DEV_ATA || adev->devno == 0 || pair == NULL)
 267                 return mask;
 268
 269         /* Check for slave of a Maxtor at UDMA6 */
 270         ata_id_c_string(pair->id, model_num, ATA_ID_PROD,
 271                           ATA_ID_PROD_LEN + 1);
 272         /* If the master is a maxtor in UDMA6 then the slave should not use UDMA 6 */
 273         if (strstr(model_num, "Maxtor") == NULL && pair->dma_mode == XFER_UDMA_6)
 274                 mask &= ~ (1 << (6 + ATA_SHIFT_UDMA));
 275
 276         return mask;
 277 }
 278
 279 /**
 280  *      pdc2027x_set_piomode - Initialize host controller PATA PIO timings
 281  *      @ap: Port to configure
 282  *      @adev: um
 283  *
 284  *      Set PIO mode for device.
 285  *
 286  *      LOCKING:
 287  *      None (inherited from caller).
 288  */
 289
 290 static void pdc2027x_set_piomode(struct ata_port *ap, struct ata_device *adev)
 291 {
 292         unsigned int pio = adev->pio_mode - XFER_PIO_0;
 293         u32 ctcr0, ctcr1;
 294
 295         PDPRINTK("adev->pio_mode[%X]\n", adev->pio_mode);
 296
 297         /* Sanity check */
 298         if (pio > 4) {
 299                 printk(KERN_ERR DRV_NAME ": Unknown pio mode [%d] ignored\n", pio);
 300                 return;
 301
 302         }
 303
 304         /* Set the PIO timing registers using value table for 133MHz */
 305         PDPRINTK("Set pio regs... \n");
 306
 307         ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 308         ctcr0 &= 0xffff0000;
 309         ctcr0 |= pdc2027x_pio_timing_tbl[pio].value0 |
 310                 (pdc2027x_pio_timing_tbl[pio].value1 << 8);
 311         iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
 312
 313         ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 314         ctcr1 &= 0x00ffffff;
 315         ctcr1 |= (pdc2027x_pio_timing_tbl[pio].value2 << 24);
 316         iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 317
 318         PDPRINTK("Set pio regs done\n");
 319
 320         PDPRINTK("Set to pio mode[%u] \n", pio);
 321 }
 322
 323 /**
 324  *      pdc2027x_set_dmamode - Initialize host controller PATA UDMA timings
 325  *      @ap: Port to configure
 326  *      @adev: um
 327  *
 328  *      Set UDMA mode for device.
 329  *
 330  *      LOCKING:
 331  *      None (inherited from caller).
 332  */
 333 static void pdc2027x_set_dmamode(struct ata_port *ap, struct ata_device *adev)
 334 {
 335         unsigned int dma_mode = adev->dma_mode;
 336         u32 ctcr0, ctcr1;
 337
 338         if ((dma_mode >= XFER_UDMA_0) &&
 339            (dma_mode <= XFER_UDMA_6)) {
 340                 /* Set the UDMA timing registers with value table for 133MHz */
 341                 unsigned int udma_mode = dma_mode & 0x07;
 342
 343                 if (dma_mode == XFER_UDMA_2) {
 344                         /*
 345                          * Turn off tHOLD.
 346                          * If tHOLD is '1', the hardware will add half clock for data hold time.
 347                          * This code segment seems to be no effect. tHOLD will be overwritten below.
 348                          */
 349                         ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 350                         iowrite32(ctcr1 & ~(1 << 7), dev_mmio(ap, adev, PDC_CTCR1));
 351                 }
 352
 353                 PDPRINTK("Set udma regs... \n");
 354
 355                 ctcr1 = ioread32(dev_mmio(ap, adev, PDC_CTCR1));
 356                 ctcr1 &= 0xff000000;
 357                 ctcr1 |= pdc2027x_udma_timing_tbl[udma_mode].value0 |
 358                         (pdc2027x_udma_timing_tbl[udma_mode].value1 << 8) |
 359                         (pdc2027x_udma_timing_tbl[udma_mode].value2 << 16);
 360                 iowrite32(ctcr1, dev_mmio(ap, adev, PDC_CTCR1));
 361
 362                 PDPRINTK("Set udma regs done\n");
 363
 364                 PDPRINTK("Set to udma mode[%u] \n", udma_mode);
 365
 366         } else  if ((dma_mode >= XFER_MW_DMA_0) &&
 367                    (dma_mode <= XFER_MW_DMA_2)) {
 368                 /* Set the MDMA timing registers with value table for 133MHz */
 369                 unsigned int mdma_mode = dma_mode & 0x07;
 370
 371                 PDPRINTK("Set mdma regs... \n");
 372                 ctcr0 = ioread32(dev_mmio(ap, adev, PDC_CTCR0));
 373
 374                 ctcr0 &= 0x0000ffff;
 375                 ctcr0 |= (pdc2027x_mdma_timing_tbl[mdma_mode].value0 << 16) |
 376                         (pdc2027x_mdma_timing_tbl[mdma_mode].value1 << 24);
 377
 378                 iowrite32(ctcr0, dev_mmio(ap, adev, PDC_CTCR0));
 379                 PDPRINTK("Set mdma regs done\n");
 380
 381                 PDPRINTK("Set to mdma mode[%u] \n", mdma_mode);
 382         } else {
 383                 printk(KERN_ERR DRV_NAME ": Unknown dma mode [%u] ignored\n", dma_mode);
 384         }
 385 }
 386
 387 /**
 388  *      pdc2027x_set_mode - Set the timing registers back to correct values.
 389  *      @link: link to configure
 390  *      @r_failed: Returned device for failure
 391  *
 392  *      The pdc2027x hardware will look at "SET FEATURES" and change the timing registers
 393  *      automatically. The values set by the hardware might be incorrect, under 133Mhz PLL.
 394  *      This function overwrites the possibly incorrect values set by the hardware to be correct.
 395  */
 396 static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed)
 397 {
 398         struct ata_port *ap = link->ap;
 399         struct ata_device *dev;
 400         int rc;
 401
 402         rc = ata_do_set_mode(link, r_failed);
 403         if (rc < 0)
 404                 return rc;
 405
 406         ata_for_each_dev(dev, link, ENABLED) {
 407                 pdc2027x_set_piomode(ap, dev);
 408
 409                 /*
 410                  * Enable prefetch if the device support PIO only.
 411                  */
 412                 if (dev->xfer_shift == ATA_SHIFT_PIO) {
 413                         u32 ctcr1 = ioread32(dev_mmio(ap, dev, PDC_CTCR1));
 414                         ctcr1 |= (1 << 25);
 415                         iowrite32(ctcr1, dev_mmio(ap, dev, PDC_CTCR1));
 416
 417                         PDPRINTK("Turn on prefetch\n");
 418                 } else {
 419                         pdc2027x_set_dmamode(ap, dev);
 420                 }
 421         }
 422         return 0;
 423 }
 424
 425 /**
 426  *      pdc2027x_check_atapi_dma - Check whether ATAPI DMA can be supported for this command
 427  *      @qc: Metadata associated with taskfile to check
 428  *
 429  *      LOCKING:
 430  *      None (inherited from caller).
 431  *
 432  *      RETURNS: 0 when ATAPI DMA can be used
 433  *               1 otherwise
 434  */
 435 static int pdc2027x_check_atapi_dma(struct ata_queued_cmd *qc)
 436 {
 437         struct scsi_cmnd *cmd = qc->scsicmd;
 438         u8 *scsicmd = cmd->cmnd;
 439         int rc = 1; /* atapi dma off by default */
 440
 441         /*
 442          * This workaround is from Promise's GPL driver.
 443          * If ATAPI DMA is used for commands not in the
 444          * following white list, say MODE_SENSE and REQUEST_SENSE,
 445          * pdc2027x might hit the irq lost problem.
 446          */
 447         switch (scsicmd[0]) {
 448         case READ_10:
 449         case WRITE_10:
 450         case READ_12:
 451         case WRITE_12:
 452         case READ_6:
 453         case WRITE_6:
 454         case 0xad: /* READ_DVD_STRUCTURE */
 455         case 0xbe: /* READ_CD */
 456                 /* ATAPI DMA is ok */
 457                 rc = 0;
 458                 break;
 459         default:
 460                 ;
 461         }
 462
 463         return rc;
 464 }
 465
 466 /**
 467  * pdc_read_counter - Read the ctr counter
 468  * @host: target ATA host
 469  */
 470
 471 static long pdc_read_counter(struct ata_host *host)
 472 {
 473         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 474         long counter;
 475         int retry = 1;
 476         u32 bccrl, bccrh, bccrlv, bccrhv;
 477
 478 retry:
 479         bccrl = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
 480         bccrh = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 481
 482         /* Read the counter values again for verification */
 483         bccrlv = ioread32(mmio_base + PDC_BYTE_COUNT) & 0x7fff;
 484         bccrhv = ioread32(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff;
 485
 486         counter = (bccrh << 15) | bccrl;
 487
 488         PDPRINTK("bccrh [%X] bccrl [%X]\n", bccrh,  bccrl);
 489         PDPRINTK("bccrhv[%X] bccrlv[%X]\n", bccrhv, bccrlv);
 490
 491         /*
 492          * The 30-bit decreasing counter are read by 2 pieces.
 493          * Incorrect value may be read when both bccrh and bccrl are changing.
 494          * Ex. When 7900 decrease to 78FF, wrong value 7800 might be read.
 495          */
 496         if (retry && !(bccrh == bccrhv && bccrl >= bccrlv)) {
 497                 retry--;
 498                 PDPRINTK("rereading counter\n");
 499                 goto retry;
 500         }
 501
 502         return counter;
 503 }
 504
 505 /**
 506  * adjust_pll - Adjust the PLL input clock in Hz.
 507  *
 508  * @pdc_controller: controller specific information
 509  * @host: target ATA host
 510  * @pll_clock: The input of PLL in HZ
 511  */
 512 static void pdc_adjust_pll(struct ata_host *host, long pll_clock, unsigned int board_idx)
 513 {
 514         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 515         u16 pll_ctl;
 516         long pll_clock_khz = pll_clock / 1000;
 517         long pout_required = board_idx? PDC_133_MHZ:PDC_100_MHZ;
 518         long ratio = pout_required / pll_clock_khz;
 519         int F, R;
 520
 521         /* Sanity check */
 522         if (unlikely(pll_clock_khz < 5000L || pll_clock_khz > 70000L)) {
 523                 printk(KERN_ERR DRV_NAME ": Invalid PLL input clock %ldkHz, give up!\n", pll_clock_khz);
 524                 return;
 525         }
 526
 527 #ifdef PDC_DEBUG
 528         PDPRINTK("pout_required is %ld\n", pout_required);
 529
 530         /* Show the current clock value of PLL control register
 531          * (maybe already configured by the firmware)
 532          */
 533         pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 534
 535         PDPRINTK("pll_ctl[%X]\n", pll_ctl);
 536 #endif
 537
 538         /*
 539          * Calculate the ratio of F, R and OD
 540          * POUT = (F + 2) / (( R + 2) * NO)
 541          */
 542         if (ratio < 8600L) { /* 8.6x */
 543                 /* Using NO = 0x01, R = 0x0D */
 544                 R = 0x0d;
 545         } else if (ratio < 12900L) { /* 12.9x */
 546                 /* Using NO = 0x01, R = 0x08 */
 547                 R = 0x08;
 548         } else if (ratio < 16100L) { /* 16.1x */
 549                 /* Using NO = 0x01, R = 0x06 */
 550                 R = 0x06;
 551         } else if (ratio < 64000L) { /* 64x */
 552                 R = 0x00;
 553         } else {
 554                 /* Invalid ratio */
 555                 printk(KERN_ERR DRV_NAME ": Invalid ratio %ld, give up!\n", ratio);
 556                 return;
 557         }
 558
 559         F = (ratio * (R+2)) / 1000 - 2;
 560
 561         if (unlikely(F < 0 || F > 127)) {
 562                 /* Invalid F */
 563                 printk(KERN_ERR DRV_NAME ": F[%d] invalid!\n", F);
 564                 return;
 565         }
 566
 567         PDPRINTK("F[%d] R[%d] ratio*1000[%ld]\n", F, R, ratio);
 568
 569         pll_ctl = (R << 8) | F;
 570
 571         PDPRINTK("Writing pll_ctl[%X]\n", pll_ctl);
 572
 573         iowrite16(pll_ctl, mmio_base + PDC_PLL_CTL);
 574         ioread16(mmio_base + PDC_PLL_CTL); /* flush */
 575
 576         /* Wait the PLL circuit to be stable */
 577         msleep(30);
 578
 579 #ifdef PDC_DEBUG
 580         /*
 581          *  Show the current clock value of PLL control register
 582          * (maybe configured by the firmware)
 583          */
 584         pll_ctl = ioread16(mmio_base + PDC_PLL_CTL);
 585
 586         PDPRINTK("pll_ctl[%X]\n", pll_ctl);
 587 #endif
 588
 589         return;
 590 }
 591
 592 /**
 593  * detect_pll_input_clock - Detect the PLL input clock in Hz.
 594  * @host: target ATA host
 595  * Ex. 16949000 on 33MHz PCI bus for pdc20275.
 596  *     Half of the PCI clock.
 597  */
 598 static long pdc_detect_pll_input_clock(struct ata_host *host)
 599 {
 600         void __iomem *mmio_base = host->iomap[PDC_MMIO_BAR];
 601         u32 scr;
 602         long start_count, end_count;
 603         ktime_t start_time, end_time;
 604         long pll_clock, usec_elapsed;
 605
 606         /* Start the test mode */
 607         scr = ioread32(mmio_base + PDC_SYS_CTL);
 608         PDPRINTK("scr[%X]\n", scr);
 609         iowrite32(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL);
 610         ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 611
 612         /* Read current counter value */
 613         start_count = pdc_read_counter(host);
 614         start_time = ktime_get();
 615
 616         /* Let the counter run for 100 ms. */
 617         msleep(100);
 618
 619         /* Read the counter values again */
 620         end_count = pdc_read_counter(host);
 621         end_time = ktime_get();
 622
 623         /* Stop the test mode */
 624         scr = ioread32(mmio_base + PDC_SYS_CTL);
 625         PDPRINTK("scr[%X]\n", scr);
 626         iowrite32(scr & ~(0x01 << 14), mmio_base + PDC_SYS_CTL);
 627         ioread32(mmio_base + PDC_SYS_CTL); /* flush */
 628
 629         /* calculate the input clock in Hz */
 630         usec_elapsed = (long) ktime_us_delta(end_time, start_time);
 631
 632         pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 *
 633                 (100000000 / usec_elapsed);
 634
 635         PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count);
 636         PDPRINTK("PLL input clock[%ld]Hz\n", pll_clock);
 637
 638         return pll_clock;
 639 }
 640
 641 /**
 642  * pdc_hardware_init - Initialize the hardware.
 643  * @host: target ATA host
 644  * @board_idx: board identifier
 645  */
 646 static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
 647 {
 648         long pll_clock;
 649
 650         /*
 651          * Detect PLL input clock rate.
 652          * On some system, where PCI bus is running at non-standard clock rate.
 653          * Ex. 25MHz or 40MHz, we have to adjust the cycle_time.
 654          * The pdc20275 controller employs PLL circuit to help correct timing registers setting.
 655          */
 656         pll_clock = pdc_detect_pll_input_clock(host);
 657
 658         dev_info(host->dev, "PLL input clock %ld kHz\n", pll_clock/1000);
 659
 660         /* Adjust PLL control register */
 661         pdc_adjust_pll(host, pll_clock, board_idx);
 662 }
 663
 664 /**
 665  * pdc_ata_setup_port - setup the mmio address
 666  * @port: ata ioports to setup
 667  * @base: base address
 668  */
 669 static void pdc_ata_setup_port(struct ata_ioports *port, void __iomem *base)
 670 {
 671         port->cmd_addr          =
 672         port->data_addr         = base;
 673         port->feature_addr      =
 674         port->error_addr        = base + 0x05;
 675         port->nsect_addr        = base + 0x0a;
 676         port->lbal_addr         = base + 0x0f;
 677         port->lbam_addr         = base + 0x10;
 678         port->lbah_addr         = base + 0x15;
 679         port->device_addr       = base + 0x1a;
 680         port->command_addr      =
 681         port->status_addr       = base + 0x1f;
 682         port->altstatus_addr    =
 683         port->ctl_addr          = base + 0x81a;
 684 }
 685
 686 /**
 687  * pdc2027x_init_one - PCI probe function
 688  * Called when an instance of PCI adapter is inserted.
 689  * This function checks whether the hardware is supported,
 690  * initialize hardware and register an instance of ata_host to
 691  * libata.  (implements struct pci_driver.probe() )
 692  *
 693  * @pdev: instance of pci_dev found
 694  * @ent:  matching entry in the id_tbl[]
 695  */
 696 static int pdc2027x_init_one(struct pci_dev *pdev,
 697                              const struct pci_device_id *ent)
 698 {
 699         static const unsigned long cmd_offset[] = { 0x17c0, 0x15c0 };
 700         static const unsigned long bmdma_offset[] = { 0x1000, 0x1008 };
 701         unsigned int board_idx = (unsigned int) ent->driver_data;
 702         const struct ata_port_info *ppi[] =
 703                 { &pdc2027x_port_info[board_idx], NULL };
 704         struct ata_host *host;
 705         void __iomem *mmio_base;
 706         int i, rc;
 707
 708         ata_print_version_once(&pdev->dev, DRV_VERSION);
 709
 710         /* alloc host */
 711         host = ata_host_alloc_pinfo(&pdev->dev, ppi, 2);
 712         if (!host)
 713                 return -ENOMEM;
 714
 715         /* acquire resources and fill host */
 716         rc = pcim_enable_device(pdev);
 717         if (rc)
 718                 return rc;
 719
 720         rc = pcim_iomap_regions(pdev, 1 << PDC_MMIO_BAR, DRV_NAME);
 721         if (rc)
 722                 return rc;
 723         host->iomap = pcim_iomap_table(pdev);
 724
 725         rc = dma_set_mask_and_coherent(&pdev->dev, ATA_DMA_MASK);
 726         if (rc)
 727                 return rc;
 728
 729         mmio_base = host->iomap[PDC_MMIO_BAR];
 730
 731         for (i = 0; i < 2; i++) {
 732                 struct ata_port *ap = host->ports[i];
 733
 734                 pdc_ata_setup_port(&ap->ioaddr, mmio_base + cmd_offset[i]);
 735                 ap->ioaddr.bmdma_addr = mmio_base + bmdma_offset[i];
 736
 737                 ata_port_pbar_desc(ap, PDC_MMIO_BAR, -1, "mmio");
 738                 ata_port_pbar_desc(ap, PDC_MMIO_BAR, cmd_offset[i], "cmd");
 739         }
 740
 741         //pci_enable_intx(pdev);
 742
 743         /* initialize adapter */
 744         pdc_hardware_init(host, board_idx);
 745
 746         pci_set_master(pdev);
 747         return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
 748                                  IRQF_SHARED, &pdc2027x_sht);
 749 }
 750
 751 #ifdef CONFIG_PM_SLEEP
 752 static int pdc2027x_reinit_one(struct pci_dev *pdev)
 753 {
 754         struct ata_host *host = pci_get_drvdata(pdev);
 755         unsigned int board_idx;
 756         int rc;
 757
 758         rc = ata_pci_device_do_resume(pdev);
 759         if (rc)
 760                 return rc;
 761
 762         if (pdev->device == PCI_DEVICE_ID_PROMISE_20268 ||
 763             pdev->device == PCI_DEVICE_ID_PROMISE_20270)
 764                 board_idx = PDC_UDMA_100;
 765         else
 766                 board_idx = PDC_UDMA_133;
 767
 768         pdc_hardware_init(host, board_idx);
 769
 770         ata_host_resume(host);
 771         return 0;
 772 }
 773 #endif
 774
 775 module_pci_driver(pdc2027x_pci_driver);