Merge tag 'sched-core-2020-12-14' of git://git.kernel.org/pub/scm/linux/kernel/git...

[mirror_ubuntu-hirsute-kernel.git] / drivers / auxdisplay / panel.c

// SPDX-License-Identifier: GPL-2.0+
/*
 * Front panel driver for Linux
 * Copyright (C) 2000-2008, Willy Tarreau <w@1wt.eu>
 * Copyright (C) 2016-2017 Glider bvba
 *
 * This code drives an LCD module (/dev/lcd), and a keypad (/dev/keypad)
 * connected to a parallel printer port.
 *
 * The LCD module may either be an HD44780-like 8-bit parallel LCD, or a 1-bit
 * serial module compatible with Samsung's KS0074. The pins may be connected in
 * any combination, everything is programmable.
 *
 * The keypad consists in a matrix of push buttons connecting input pins to
 * data output pins or to the ground. The combinations have to be hard-coded
 * in the driver, though several profiles exist and adding new ones is easy.
 *
 * Several profiles are provided for commonly found LCD+keypad modules on the
 * market, such as those found in Nexcom's appliances.
 *
 * FIXME:
 *      - the initialization/deinitialization process is very dirty and should
 *        be rewritten. It may even be buggy.
 *
 * TODO:
 *      - document 24 keys keyboard (3 rows of 8 cols, 32 diodes + 2 inputs)
 *      - make the LCD a part of a virtual screen of Vx*Vy
 *      - make the inputs list smp-safe
 *      - change the keyboard to a double mapping : signals -> key_id -> values
 *        so that applications can change values without knowing signals
 *
 */

#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt

#include <linux/module.h>

#include <linux/types.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/spinlock.h>
#include <linux/interrupt.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/ctype.h>
#include <linux/parport.h>
#include <linux/list.h>

#include <linux/io.h>
#include <linux/uaccess.h>

#include "charlcd.h"
#include "hd44780_common.h"

#define LCD_MAXBYTES            256     /* max burst write */

#define KEYPAD_BUFFER           64

/* poll the keyboard this every second */
#define INPUT_POLL_TIME         (HZ / 50)
/* a key starts to repeat after this times INPUT_POLL_TIME */
#define KEYPAD_REP_START        (10)
/* a key repeats this times INPUT_POLL_TIME */
#define KEYPAD_REP_DELAY        (2)

/* converts an r_str() input to an active high, bits string : 000BAOSE */
#define PNL_PINPUT(a)           ((((unsigned char)(a)) ^ 0x7F) >> 3)

#define PNL_PBUSY               0x80    /* inverted input, active low */
#define PNL_PACK                0x40    /* direct input, active low */
#define PNL_POUTPA              0x20    /* direct input, active high */
#define PNL_PSELECD             0x10    /* direct input, active high */
#define PNL_PERRORP             0x08    /* direct input, active low */

#define PNL_PBIDIR              0x20    /* bi-directional ports */
/* high to read data in or-ed with data out */
#define PNL_PINTEN              0x10
#define PNL_PSELECP             0x08    /* inverted output, active low */
#define PNL_PINITP              0x04    /* direct output, active low */
#define PNL_PAUTOLF             0x02    /* inverted output, active low */
#define PNL_PSTROBE             0x01    /* inverted output */

#define PNL_PD0                 0x01
#define PNL_PD1                 0x02
#define PNL_PD2                 0x04
#define PNL_PD3                 0x08
#define PNL_PD4                 0x10
#define PNL_PD5                 0x20
#define PNL_PD6                 0x40
#define PNL_PD7                 0x80

#define PIN_NONE                0
#define PIN_STROBE              1
#define PIN_D0                  2
#define PIN_D1                  3
#define PIN_D2                  4
#define PIN_D3                  5
#define PIN_D4                  6
#define PIN_D5                  7
#define PIN_D6                  8
#define PIN_D7                  9
#define PIN_AUTOLF              14
#define PIN_INITP               16
#define PIN_SELECP              17
#define PIN_NOT_SET             127

#define NOT_SET                 -1

/* macros to simplify use of the parallel port */
#define r_ctr(x)        (parport_read_control((x)->port))
#define r_dtr(x)        (parport_read_data((x)->port))
#define r_str(x)        (parport_read_status((x)->port))
#define w_ctr(x, y)     (parport_write_control((x)->port, (y)))
#define w_dtr(x, y)     (parport_write_data((x)->port, (y)))

/* this defines which bits are to be used and which ones to be ignored */
/* logical or of the output bits involved in the scan matrix */
static __u8 scan_mask_o;
/* logical or of the input bits involved in the scan matrix */
static __u8 scan_mask_i;

enum input_type {
        INPUT_TYPE_STD,
        INPUT_TYPE_KBD,
};

enum input_state {
        INPUT_ST_LOW,
        INPUT_ST_RISING,
        INPUT_ST_HIGH,
        INPUT_ST_FALLING,
};

struct logical_input {
        struct list_head list;
        __u64 mask;
        __u64 value;
        enum input_type type;
        enum input_state state;
        __u8 rise_time, fall_time;
        __u8 rise_timer, fall_timer, high_timer;

        union {
                struct {        /* valid when type == INPUT_TYPE_STD */
                        void (*press_fct)(int);
                        void (*release_fct)(int);
                        int press_data;
                        int release_data;
                } std;
                struct {        /* valid when type == INPUT_TYPE_KBD */
                        char press_str[sizeof(void *) + sizeof(int)] __nonstring;
                        char repeat_str[sizeof(void *) + sizeof(int)] __nonstring;
                        char release_str[sizeof(void *) + sizeof(int)] __nonstring;
                } kbd;
        } u;
};

static LIST_HEAD(logical_inputs);       /* list of all defined logical inputs */

/* physical contacts history
 * Physical contacts are a 45 bits string of 9 groups of 5 bits each.
 * The 8 lower groups correspond to output bits 0 to 7, and the 9th group
 * corresponds to the ground.
 * Within each group, bits are stored in the same order as read on the port :
 * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0).
 * So, each __u64 is represented like this :
 * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE
 * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00>
 */

/* what has just been read from the I/O ports */
static __u64 phys_read;
/* previous phys_read */
static __u64 phys_read_prev;
/* stabilized phys_read (phys_read|phys_read_prev) */
static __u64 phys_curr;
/* previous phys_curr */
static __u64 phys_prev;
/* 0 means that at least one logical signal needs be computed */
static char inputs_stable;

/* these variables are specific to the keypad */
static struct {
        bool enabled;
} keypad;

static char keypad_buffer[KEYPAD_BUFFER];
static int keypad_buflen;
static int keypad_start;
static char keypressed;
static wait_queue_head_t keypad_read_wait;

/* lcd-specific variables */
static struct {
        bool enabled;
        bool initialized;

        int charset;
        int proto;

        /* TODO: use union here? */
        struct {
                int e;
                int rs;
                int rw;
                int cl;
                int da;
                int bl;
        } pins;

        struct charlcd *charlcd;
} lcd;

/* Needed only for init */
static int selected_lcd_type = NOT_SET;

/*
 * Bit masks to convert LCD signals to parallel port outputs.
 * _d_ are values for data port, _c_ are for control port.
 * [0] = signal OFF, [1] = signal ON, [2] = mask
 */
#define BIT_CLR         0
#define BIT_SET         1
#define BIT_MSK         2
#define BIT_STATES      3
/*
 * one entry for each bit on the LCD
 */
#define LCD_BIT_E       0
#define LCD_BIT_RS      1
#define LCD_BIT_RW      2
#define LCD_BIT_BL      3
#define LCD_BIT_CL      4
#define LCD_BIT_DA      5
#define LCD_BITS        6

/*
 * each bit can be either connected to a DATA or CTRL port
 */
#define LCD_PORT_C      0
#define LCD_PORT_D      1
#define LCD_PORTS       2

static unsigned char lcd_bits[LCD_PORTS][LCD_BITS][BIT_STATES];

/*
 * LCD protocols
 */
#define LCD_PROTO_PARALLEL      0
#define LCD_PROTO_SERIAL        1
#define LCD_PROTO_TI_DA8XX_LCD  2

/*
 * LCD character sets
 */
#define LCD_CHARSET_NORMAL      0
#define LCD_CHARSET_KS0074      1

/*
 * LCD types
 */
#define LCD_TYPE_NONE           0
#define LCD_TYPE_CUSTOM         1
#define LCD_TYPE_OLD            2
#define LCD_TYPE_KS0074         3
#define LCD_TYPE_HANTRONIX      4
#define LCD_TYPE_NEXCOM         5

/*
 * keypad types
 */
#define KEYPAD_TYPE_NONE        0
#define KEYPAD_TYPE_OLD         1
#define KEYPAD_TYPE_NEW         2
#define KEYPAD_TYPE_NEXCOM      3

/*
 * panel profiles
 */
#define PANEL_PROFILE_CUSTOM    0
#define PANEL_PROFILE_OLD       1
#define PANEL_PROFILE_NEW       2
#define PANEL_PROFILE_HANTRONIX 3
#define PANEL_PROFILE_NEXCOM    4
#define PANEL_PROFILE_LARGE     5

/*
 * Construct custom config from the kernel's configuration
 */
#define DEFAULT_PARPORT         0
#define DEFAULT_PROFILE         PANEL_PROFILE_LARGE
#define DEFAULT_KEYPAD_TYPE     KEYPAD_TYPE_OLD
#define DEFAULT_LCD_TYPE        LCD_TYPE_OLD
#define DEFAULT_LCD_HEIGHT      2
#define DEFAULT_LCD_WIDTH       40
#define DEFAULT_LCD_CHARSET     LCD_CHARSET_NORMAL
#define DEFAULT_LCD_PROTO       LCD_PROTO_PARALLEL

#define DEFAULT_LCD_PIN_E       PIN_AUTOLF
#define DEFAULT_LCD_PIN_RS      PIN_SELECP
#define DEFAULT_LCD_PIN_RW      PIN_INITP
#define DEFAULT_LCD_PIN_SCL     PIN_STROBE
#define DEFAULT_LCD_PIN_SDA     PIN_D0
#define DEFAULT_LCD_PIN_BL      PIN_NOT_SET

#ifdef CONFIG_PANEL_PARPORT
#undef DEFAULT_PARPORT
#define DEFAULT_PARPORT CONFIG_PANEL_PARPORT
#endif

#ifdef CONFIG_PANEL_PROFILE
#undef DEFAULT_PROFILE
#define DEFAULT_PROFILE CONFIG_PANEL_PROFILE
#endif

#if DEFAULT_PROFILE == 0        /* custom */
#ifdef CONFIG_PANEL_KEYPAD
#undef DEFAULT_KEYPAD_TYPE
#define DEFAULT_KEYPAD_TYPE CONFIG_PANEL_KEYPAD
#endif

#ifdef CONFIG_PANEL_LCD
#undef DEFAULT_LCD_TYPE
#define DEFAULT_LCD_TYPE CONFIG_PANEL_LCD
#endif

#ifdef CONFIG_PANEL_LCD_HEIGHT
#undef DEFAULT_LCD_HEIGHT
#define DEFAULT_LCD_HEIGHT CONFIG_PANEL_LCD_HEIGHT
#endif

#ifdef CONFIG_PANEL_LCD_WIDTH
#undef DEFAULT_LCD_WIDTH
#define DEFAULT_LCD_WIDTH CONFIG_PANEL_LCD_WIDTH
#endif

#ifdef CONFIG_PANEL_LCD_BWIDTH
#undef DEFAULT_LCD_BWIDTH
#define DEFAULT_LCD_BWIDTH CONFIG_PANEL_LCD_BWIDTH
#endif

#ifdef CONFIG_PANEL_LCD_HWIDTH
#undef DEFAULT_LCD_HWIDTH
#define DEFAULT_LCD_HWIDTH CONFIG_PANEL_LCD_HWIDTH
#endif

#ifdef CONFIG_PANEL_LCD_CHARSET
#undef DEFAULT_LCD_CHARSET
#define DEFAULT_LCD_CHARSET CONFIG_PANEL_LCD_CHARSET
#endif

#ifdef CONFIG_PANEL_LCD_PROTO
#undef DEFAULT_LCD_PROTO
#define DEFAULT_LCD_PROTO CONFIG_PANEL_LCD_PROTO
#endif

#ifdef CONFIG_PANEL_LCD_PIN_E
#undef DEFAULT_LCD_PIN_E
#define DEFAULT_LCD_PIN_E CONFIG_PANEL_LCD_PIN_E
#endif

#ifdef CONFIG_PANEL_LCD_PIN_RS
#undef DEFAULT_LCD_PIN_RS
#define DEFAULT_LCD_PIN_RS CONFIG_PANEL_LCD_PIN_RS
#endif

#ifdef CONFIG_PANEL_LCD_PIN_RW
#undef DEFAULT_LCD_PIN_RW
#define DEFAULT_LCD_PIN_RW CONFIG_PANEL_LCD_PIN_RW
#endif

#ifdef CONFIG_PANEL_LCD_PIN_SCL
#undef DEFAULT_LCD_PIN_SCL
#define DEFAULT_LCD_PIN_SCL CONFIG_PANEL_LCD_PIN_SCL
#endif

#ifdef CONFIG_PANEL_LCD_PIN_SDA
#undef DEFAULT_LCD_PIN_SDA
#define DEFAULT_LCD_PIN_SDA CONFIG_PANEL_LCD_PIN_SDA
#endif

#ifdef CONFIG_PANEL_LCD_PIN_BL
#undef DEFAULT_LCD_PIN_BL
#define DEFAULT_LCD_PIN_BL CONFIG_PANEL_LCD_PIN_BL
#endif

#endif /* DEFAULT_PROFILE == 0 */

/* global variables */

/* Device single-open policy control */
static atomic_t keypad_available = ATOMIC_INIT(1);

static struct pardevice *pprt;

static int keypad_initialized;

static DEFINE_SPINLOCK(pprt_lock);
static struct timer_list scan_timer;

MODULE_DESCRIPTION("Generic parallel port LCD/Keypad driver");

static int parport = DEFAULT_PARPORT;
module_param(parport, int, 0000);
MODULE_PARM_DESC(parport, "Parallel port index (0=lpt1, 1=lpt2, ...)");

static int profile = DEFAULT_PROFILE;
module_param(profile, int, 0000);
MODULE_PARM_DESC(profile,
                 "1=16x2 old kp; 2=serial 16x2, new kp; 3=16x2 hantronix; "
                 "4=16x2 nexcom; default=40x2, old kp");

static int keypad_type = NOT_SET;
module_param(keypad_type, int, 0000);
MODULE_PARM_DESC(keypad_type,
                 "Keypad type: 0=none, 1=old 6 keys, 2=new 6+1 keys, 3=nexcom 4 keys");

static int lcd_type = NOT_SET;
module_param(lcd_type, int, 0000);
MODULE_PARM_DESC(lcd_type,
                 "LCD type: 0=none, 1=compiled-in, 2=old, 3=serial ks0074, 4=hantronix, 5=nexcom");

static int lcd_height = NOT_SET;
module_param(lcd_height, int, 0000);
MODULE_PARM_DESC(lcd_height, "Number of lines on the LCD");

static int lcd_width = NOT_SET;
module_param(lcd_width, int, 0000);
MODULE_PARM_DESC(lcd_width, "Number of columns on the LCD");

static int lcd_bwidth = NOT_SET;        /* internal buffer width (usually 40) */
module_param(lcd_bwidth, int, 0000);
MODULE_PARM_DESC(lcd_bwidth, "Internal LCD line width (40)");

static int lcd_hwidth = NOT_SET;        /* hardware buffer width (usually 64) */
module_param(lcd_hwidth, int, 0000);
MODULE_PARM_DESC(lcd_hwidth, "LCD line hardware address (64)");

static int lcd_charset = NOT_SET;
module_param(lcd_charset, int, 0000);
MODULE_PARM_DESC(lcd_charset, "LCD character set: 0=standard, 1=KS0074");

static int lcd_proto = NOT_SET;
module_param(lcd_proto, int, 0000);
MODULE_PARM_DESC(lcd_proto,
                 "LCD communication: 0=parallel (//), 1=serial, 2=TI LCD Interface");

/*
 * These are the parallel port pins the LCD control signals are connected to.
 * Set this to 0 if the signal is not used. Set it to its opposite value
 * (negative) if the signal is negated. -MAXINT is used to indicate that the
 * pin has not been explicitly specified.
 *
 * WARNING! no check will be performed about collisions with keypad !
 */

static int lcd_e_pin  = PIN_NOT_SET;
module_param(lcd_e_pin, int, 0000);
MODULE_PARM_DESC(lcd_e_pin,
                 "# of the // port pin connected to LCD 'E' signal, with polarity (-17..17)");

static int lcd_rs_pin = PIN_NOT_SET;
module_param(lcd_rs_pin, int, 0000);
MODULE_PARM_DESC(lcd_rs_pin,
                 "# of the // port pin connected to LCD 'RS' signal, with polarity (-17..17)");

static int lcd_rw_pin = PIN_NOT_SET;
module_param(lcd_rw_pin, int, 0000);
MODULE_PARM_DESC(lcd_rw_pin,
                 "# of the // port pin connected to LCD 'RW' signal, with polarity (-17..17)");

static int lcd_cl_pin = PIN_NOT_SET;
module_param(lcd_cl_pin, int, 0000);
MODULE_PARM_DESC(lcd_cl_pin,
                 "# of the // port pin connected to serial LCD 'SCL' signal, with polarity (-17..17)");

static int lcd_da_pin = PIN_NOT_SET;
module_param(lcd_da_pin, int, 0000);
MODULE_PARM_DESC(lcd_da_pin,
                 "# of the // port pin connected to serial LCD 'SDA' signal, with polarity (-17..17)");

static int lcd_bl_pin = PIN_NOT_SET;
module_param(lcd_bl_pin, int, 0000);
MODULE_PARM_DESC(lcd_bl_pin,
                 "# of the // port pin connected to LCD backlight, with polarity (-17..17)");

/* Deprecated module parameters - consider not using them anymore */

static int lcd_enabled = NOT_SET;
module_param(lcd_enabled, int, 0000);
MODULE_PARM_DESC(lcd_enabled, "Deprecated option, use lcd_type instead");

static int keypad_enabled = NOT_SET;
module_param(keypad_enabled, int, 0000);
MODULE_PARM_DESC(keypad_enabled, "Deprecated option, use keypad_type instead");

/* for some LCD drivers (ks0074) we need a charset conversion table. */
static const unsigned char lcd_char_conv_ks0074[256] = {
        /*          0|8   1|9   2|A   3|B   4|C   5|D   6|E   7|F */
        /* 0x00 */ 0x00, 0x01, 0x02, 0x03, 0x04, 0x05, 0x06, 0x07,
        /* 0x08 */ 0x08, 0x09, 0x0a, 0x0b, 0x0c, 0x0d, 0x0e, 0x0f,
        /* 0x10 */ 0x10, 0x11, 0x12, 0x13, 0x14, 0x15, 0x16, 0x17,
        /* 0x18 */ 0x18, 0x19, 0x1a, 0x1b, 0x1c, 0x1d, 0x1e, 0x1f,
        /* 0x20 */ 0x20, 0x21, 0x22, 0x23, 0xa2, 0x25, 0x26, 0x27,
        /* 0x28 */ 0x28, 0x29, 0x2a, 0x2b, 0x2c, 0x2d, 0x2e, 0x2f,
        /* 0x30 */ 0x30, 0x31, 0x32, 0x33, 0x34, 0x35, 0x36, 0x37,
        /* 0x38 */ 0x38, 0x39, 0x3a, 0x3b, 0x3c, 0x3d, 0x3e, 0x3f,
        /* 0x40 */ 0xa0, 0x41, 0x42, 0x43, 0x44, 0x45, 0x46, 0x47,
        /* 0x48 */ 0x48, 0x49, 0x4a, 0x4b, 0x4c, 0x4d, 0x4e, 0x4f,
        /* 0x50 */ 0x50, 0x51, 0x52, 0x53, 0x54, 0x55, 0x56, 0x57,
        /* 0x58 */ 0x58, 0x59, 0x5a, 0xfa, 0xfb, 0xfc, 0x1d, 0xc4,
        /* 0x60 */ 0x96, 0x61, 0x62, 0x63, 0x64, 0x65, 0x66, 0x67,
        /* 0x68 */ 0x68, 0x69, 0x6a, 0x6b, 0x6c, 0x6d, 0x6e, 0x6f,
        /* 0x70 */ 0x70, 0x71, 0x72, 0x73, 0x74, 0x75, 0x76, 0x77,
        /* 0x78 */ 0x78, 0x79, 0x7a, 0xfd, 0xfe, 0xff, 0xce, 0x20,
        /* 0x80 */ 0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87,
        /* 0x88 */ 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f,
        /* 0x90 */ 0x90, 0x91, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97,
        /* 0x98 */ 0x98, 0x99, 0x9a, 0x9b, 0x9c, 0x9d, 0x9e, 0x9f,
        /* 0xA0 */ 0x20, 0x40, 0xb1, 0xa1, 0x24, 0xa3, 0xfe, 0x5f,
        /* 0xA8 */ 0x22, 0xc8, 0x61, 0x14, 0x97, 0x2d, 0xad, 0x96,
        /* 0xB0 */ 0x80, 0x8c, 0x82, 0x83, 0x27, 0x8f, 0x86, 0xdd,
        /* 0xB8 */ 0x2c, 0x81, 0x6f, 0x15, 0x8b, 0x8a, 0x84, 0x60,
        /* 0xC0 */ 0xe2, 0xe2, 0xe2, 0x5b, 0x5b, 0xae, 0xbc, 0xa9,
        /* 0xC8 */ 0xc5, 0xbf, 0xc6, 0xf1, 0xe3, 0xe3, 0xe3, 0xe3,
        /* 0xD0 */ 0x44, 0x5d, 0xa8, 0xe4, 0xec, 0xec, 0x5c, 0x78,
        /* 0xD8 */ 0xab, 0xa6, 0xe5, 0x5e, 0x5e, 0xe6, 0xaa, 0xbe,
        /* 0xE0 */ 0x7f, 0xe7, 0xaf, 0x7b, 0x7b, 0xaf, 0xbd, 0xc8,
        /* 0xE8 */ 0xa4, 0xa5, 0xc7, 0xf6, 0xa7, 0xe8, 0x69, 0x69,
        /* 0xF0 */ 0xed, 0x7d, 0xa8, 0xe4, 0xec, 0x5c, 0x5c, 0x25,
        /* 0xF8 */ 0xac, 0xa6, 0xea, 0xef, 0x7e, 0xeb, 0xb2, 0x79,
};

static const char old_keypad_profile[][4][9] = {
        {"S0", "Left\n", "Left\n", ""},
        {"S1", "Down\n", "Down\n", ""},
        {"S2", "Up\n", "Up\n", ""},
        {"S3", "Right\n", "Right\n", ""},
        {"S4", "Esc\n", "Esc\n", ""},
        {"S5", "Ret\n", "Ret\n", ""},
        {"", "", "", ""}
};

/* signals, press, repeat, release */
static const char new_keypad_profile[][4][9] = {
        {"S0", "Left\n", "Left\n", ""},
        {"S1", "Down\n", "Down\n", ""},
        {"S2", "Up\n", "Up\n", ""},
        {"S3", "Right\n", "Right\n", ""},
        {"S4s5", "", "Esc\n", "Esc\n"},
        {"s4S5", "", "Ret\n", "Ret\n"},
        {"S4S5", "Help\n", "", ""},
        /* add new signals above this line */
        {"", "", "", ""}
};

/* signals, press, repeat, release */
static const char nexcom_keypad_profile[][4][9] = {
        {"a-p-e-", "Down\n", "Down\n", ""},
        {"a-p-E-", "Ret\n", "Ret\n", ""},
        {"a-P-E-", "Esc\n", "Esc\n", ""},
        {"a-P-e-", "Up\n", "Up\n", ""},
        /* add new signals above this line */
        {"", "", "", ""}
};

static const char (*keypad_profile)[4][9] = old_keypad_profile;

static DECLARE_BITMAP(bits, LCD_BITS);

static void lcd_get_bits(unsigned int port, int *val)
{
        unsigned int bit, state;

        for (bit = 0; bit < LCD_BITS; bit++) {
                state = test_bit(bit, bits) ? BIT_SET : BIT_CLR;
                *val &= lcd_bits[port][bit][BIT_MSK];
                *val |= lcd_bits[port][bit][state];
        }
}

/* sets data port bits according to current signals values */
static int set_data_bits(void)
{
        int val;

        val = r_dtr(pprt);
        lcd_get_bits(LCD_PORT_D, &val);
        w_dtr(pprt, val);
        return val;
}

/* sets ctrl port bits according to current signals values */
static int set_ctrl_bits(void)
{
        int val;

        val = r_ctr(pprt);
        lcd_get_bits(LCD_PORT_C, &val);
        w_ctr(pprt, val);
        return val;
}

/* sets ctrl & data port bits according to current signals values */
static void panel_set_bits(void)
{
        set_data_bits();
        set_ctrl_bits();
}

/*
 * Converts a parallel port pin (from -25 to 25) to data and control ports
 * masks, and data and control port bits. The signal will be considered
 * unconnected if it's on pin 0 or an invalid pin (<-25 or >25).
 *
 * Result will be used this way :
 *   out(dport, in(dport) & d_val[2] | d_val[signal_state])
 *   out(cport, in(cport) & c_val[2] | c_val[signal_state])
 */
static void pin_to_bits(int pin, unsigned char *d_val, unsigned char *c_val)
{
        int d_bit, c_bit, inv;

        d_val[0] = 0;
        c_val[0] = 0;
        d_val[1] = 0;
        c_val[1] = 0;
        d_val[2] = 0xFF;
        c_val[2] = 0xFF;

        if (pin == 0)
                return;

        inv = (pin < 0);
        if (inv)
                pin = -pin;

        d_bit = 0;
        c_bit = 0;

        switch (pin) {
        case PIN_STROBE:        /* strobe, inverted */
                c_bit = PNL_PSTROBE;
                inv = !inv;
                break;
        case PIN_D0...PIN_D7:   /* D0 - D7 = 2 - 9 */
                d_bit = 1 << (pin - 2);
                break;
        case PIN_AUTOLF:        /* autofeed, inverted */
                c_bit = PNL_PAUTOLF;
                inv = !inv;
                break;
        case PIN_INITP:         /* init, direct */
                c_bit = PNL_PINITP;
                break;
        case PIN_SELECP:        /* select_in, inverted */
                c_bit = PNL_PSELECP;
                inv = !inv;
                break;
        default:                /* unknown pin, ignore */
                break;
        }

        if (c_bit) {
                c_val[2] &= ~c_bit;
                c_val[!inv] = c_bit;
        } else if (d_bit) {
                d_val[2] &= ~d_bit;
                d_val[!inv] = d_bit;
        }
}

/*
 * send a serial byte to the LCD panel. The caller is responsible for locking
 * if needed.
 */
static void lcd_send_serial(int byte)
{
        int bit;

        /*
         * the data bit is set on D0, and the clock on STROBE.
         * LCD reads D0 on STROBE's rising edge.
         */
        for (bit = 0; bit < 8; bit++) {
                clear_bit(LCD_BIT_CL, bits);    /* CLK low */
                panel_set_bits();
                if (byte & 1) {
                        set_bit(LCD_BIT_DA, bits);
                } else {
                        clear_bit(LCD_BIT_DA, bits);
                }

                panel_set_bits();
                udelay(2);  /* maintain the data during 2 us before CLK up */
                set_bit(LCD_BIT_CL, bits);      /* CLK high */
                panel_set_bits();
                udelay(1);  /* maintain the strobe during 1 us */
                byte >>= 1;
        }
}

/* turn the backlight on or off */
static void lcd_backlight(struct charlcd *charlcd, enum charlcd_onoff on)
{
        if (lcd.pins.bl == PIN_NONE)
                return;

        /* The backlight is activated by setting the AUTOFEED line to +5V  */
        spin_lock_irq(&pprt_lock);
        if (on)
                set_bit(LCD_BIT_BL, bits);
        else
                clear_bit(LCD_BIT_BL, bits);
        panel_set_bits();
        spin_unlock_irq(&pprt_lock);
}

/* send a command to the LCD panel in serial mode */
static void lcd_write_cmd_s(struct hd44780_common *hdc, int cmd)
{
        spin_lock_irq(&pprt_lock);
        lcd_send_serial(0x1F);  /* R/W=W, RS=0 */
        lcd_send_serial(cmd & 0x0F);
        lcd_send_serial((cmd >> 4) & 0x0F);
        udelay(40);             /* the shortest command takes at least 40 us */
        spin_unlock_irq(&pprt_lock);
}

/* send data to the LCD panel in serial mode */
static void lcd_write_data_s(struct hd44780_common *hdc, int data)
{
        spin_lock_irq(&pprt_lock);
        lcd_send_serial(0x5F);  /* R/W=W, RS=1 */
        lcd_send_serial(data & 0x0F);
        lcd_send_serial((data >> 4) & 0x0F);
        udelay(40);             /* the shortest data takes at least 40 us */
        spin_unlock_irq(&pprt_lock);
}

/* send a command to the LCD panel in 8 bits parallel mode */
static void lcd_write_cmd_p8(struct hd44780_common *hdc, int cmd)
{
        spin_lock_irq(&pprt_lock);
        /* present the data to the data port */
        w_dtr(pprt, cmd);
        udelay(20);     /* maintain the data during 20 us before the strobe */

        set_bit(LCD_BIT_E, bits);
        clear_bit(LCD_BIT_RS, bits);
        clear_bit(LCD_BIT_RW, bits);
        set_ctrl_bits();

        udelay(40);     /* maintain the strobe during 40 us */

        clear_bit(LCD_BIT_E, bits);
        set_ctrl_bits();

        udelay(120);    /* the shortest command takes at least 120 us */
        spin_unlock_irq(&pprt_lock);
}

/* send data to the LCD panel in 8 bits parallel mode */
static void lcd_write_data_p8(struct hd44780_common *hdc, int data)
{
        spin_lock_irq(&pprt_lock);
        /* present the data to the data port */
        w_dtr(pprt, data);
        udelay(20);     /* maintain the data during 20 us before the strobe */

        set_bit(LCD_BIT_E, bits);
        set_bit(LCD_BIT_RS, bits);
        clear_bit(LCD_BIT_RW, bits);
        set_ctrl_bits();

        udelay(40);     /* maintain the strobe during 40 us */

        clear_bit(LCD_BIT_E, bits);
        set_ctrl_bits();

        udelay(45);     /* the shortest data takes at least 45 us */
        spin_unlock_irq(&pprt_lock);
}

/* send a command to the TI LCD panel */
static void lcd_write_cmd_tilcd(struct hd44780_common *hdc, int cmd)
{
        spin_lock_irq(&pprt_lock);
        /* present the data to the control port */
        w_ctr(pprt, cmd);
        udelay(60);
        spin_unlock_irq(&pprt_lock);
}

/* send data to the TI LCD panel */
static void lcd_write_data_tilcd(struct hd44780_common *hdc, int data)
{
        spin_lock_irq(&pprt_lock);
        /* present the data to the data port */
        w_dtr(pprt, data);
        udelay(60);
        spin_unlock_irq(&pprt_lock);
}

static const struct charlcd_ops charlcd_ops = {
        .backlight      = lcd_backlight,
        .print          = hd44780_common_print,
        .gotoxy         = hd44780_common_gotoxy,
        .home           = hd44780_common_home,
        .clear_display  = hd44780_common_clear_display,
        .init_display   = hd44780_common_init_display,
        .shift_cursor   = hd44780_common_shift_cursor,
        .shift_display  = hd44780_common_shift_display,
        .display        = hd44780_common_display,
        .cursor         = hd44780_common_cursor,
        .blink          = hd44780_common_blink,
        .fontsize       = hd44780_common_fontsize,
        .lines          = hd44780_common_lines,
        .redefine_char  = hd44780_common_redefine_char,
};

/* initialize the LCD driver */
static void lcd_init(void)
{
        struct charlcd *charlcd;
        struct hd44780_common *hdc;

        hdc = hd44780_common_alloc();
        if (!hdc)
                return;

        charlcd = charlcd_alloc();
        if (!charlcd) {
                kfree(hdc);
                return;
        }

        hdc->hd44780 = &lcd;
        charlcd->drvdata = hdc;

        /*
         * Init lcd struct with load-time values to preserve exact
         * current functionality (at least for now).
         */
        charlcd->height = lcd_height;
        charlcd->width = lcd_width;
        hdc->bwidth = lcd_bwidth;
        hdc->hwidth = lcd_hwidth;

        switch (selected_lcd_type) {
        case LCD_TYPE_OLD:
                /* parallel mode, 8 bits */
                lcd.proto = LCD_PROTO_PARALLEL;
                lcd.charset = LCD_CHARSET_NORMAL;
                lcd.pins.e = PIN_STROBE;
                lcd.pins.rs = PIN_AUTOLF;

                charlcd->width = 40;
                hdc->bwidth = 40;
                hdc->hwidth = 64;
                charlcd->height = 2;
                break;
        case LCD_TYPE_KS0074:
                /* serial mode, ks0074 */
                lcd.proto = LCD_PROTO_SERIAL;
                lcd.charset = LCD_CHARSET_KS0074;
                lcd.pins.bl = PIN_AUTOLF;
                lcd.pins.cl = PIN_STROBE;
                lcd.pins.da = PIN_D0;

                charlcd->width = 16;
                hdc->bwidth = 40;
                hdc->hwidth = 16;
                charlcd->height = 2;
                break;
        case LCD_TYPE_NEXCOM:
                /* parallel mode, 8 bits, generic */
                lcd.proto = LCD_PROTO_PARALLEL;
                lcd.charset = LCD_CHARSET_NORMAL;
                lcd.pins.e = PIN_AUTOLF;
                lcd.pins.rs = PIN_SELECP;
                lcd.pins.rw = PIN_INITP;

                charlcd->width = 16;
                hdc->bwidth = 40;
                hdc->hwidth = 64;
                charlcd->height = 2;
                break;
        case LCD_TYPE_CUSTOM:
                /* customer-defined */
                lcd.proto = DEFAULT_LCD_PROTO;
                lcd.charset = DEFAULT_LCD_CHARSET;
                /* default geometry will be set later */
                break;
        case LCD_TYPE_HANTRONIX:
                /* parallel mode, 8 bits, hantronix-like */
        default:
                lcd.proto = LCD_PROTO_PARALLEL;
                lcd.charset = LCD_CHARSET_NORMAL;
                lcd.pins.e = PIN_STROBE;
                lcd.pins.rs = PIN_SELECP;

                charlcd->width = 16;
                hdc->bwidth = 40;
                hdc->hwidth = 64;
                charlcd->height = 2;
                break;
        }

        /* Overwrite with module params set on loading */
        if (lcd_height != NOT_SET)
                charlcd->height = lcd_height;
        if (lcd_width != NOT_SET)
                charlcd->width = lcd_width;
        if (lcd_bwidth != NOT_SET)
                hdc->bwidth = lcd_bwidth;
        if (lcd_hwidth != NOT_SET)
                hdc->hwidth = lcd_hwidth;
        if (lcd_charset != NOT_SET)
                lcd.charset = lcd_charset;
        if (lcd_proto != NOT_SET)
                lcd.proto = lcd_proto;
        if (lcd_e_pin != PIN_NOT_SET)
                lcd.pins.e = lcd_e_pin;
        if (lcd_rs_pin != PIN_NOT_SET)
                lcd.pins.rs = lcd_rs_pin;
        if (lcd_rw_pin != PIN_NOT_SET)
                lcd.pins.rw = lcd_rw_pin;
        if (lcd_cl_pin != PIN_NOT_SET)
                lcd.pins.cl = lcd_cl_pin;
        if (lcd_da_pin != PIN_NOT_SET)
                lcd.pins.da = lcd_da_pin;
        if (lcd_bl_pin != PIN_NOT_SET)
                lcd.pins.bl = lcd_bl_pin;

        /* this is used to catch wrong and default values */
        if (charlcd->width <= 0)
                charlcd->width = DEFAULT_LCD_WIDTH;
        if (hdc->bwidth <= 0)
                hdc->bwidth = DEFAULT_LCD_BWIDTH;
        if (hdc->hwidth <= 0)
                hdc->hwidth = DEFAULT_LCD_HWIDTH;
        if (charlcd->height <= 0)
                charlcd->height = DEFAULT_LCD_HEIGHT;

        if (lcd.proto == LCD_PROTO_SERIAL) {    /* SERIAL */
                charlcd->ops = &charlcd_ops;
                hdc->write_data = lcd_write_data_s;
                hdc->write_cmd = lcd_write_cmd_s;

                if (lcd.pins.cl == PIN_NOT_SET)
                        lcd.pins.cl = DEFAULT_LCD_PIN_SCL;
                if (lcd.pins.da == PIN_NOT_SET)
                        lcd.pins.da = DEFAULT_LCD_PIN_SDA;

        } else if (lcd.proto == LCD_PROTO_PARALLEL) {   /* PARALLEL */
                charlcd->ops = &charlcd_ops;
                hdc->write_data = lcd_write_data_p8;
                hdc->write_cmd = lcd_write_cmd_p8;

                if (lcd.pins.e == PIN_NOT_SET)
                        lcd.pins.e = DEFAULT_LCD_PIN_E;
                if (lcd.pins.rs == PIN_NOT_SET)
                        lcd.pins.rs = DEFAULT_LCD_PIN_RS;
                if (lcd.pins.rw == PIN_NOT_SET)
                        lcd.pins.rw = DEFAULT_LCD_PIN_RW;
        } else {
                charlcd->ops = &charlcd_ops;
                hdc->write_data = lcd_write_data_tilcd;
                hdc->write_cmd = lcd_write_cmd_tilcd;
        }

        if (lcd.pins.bl == PIN_NOT_SET)
                lcd.pins.bl = DEFAULT_LCD_PIN_BL;

        if (lcd.pins.e == PIN_NOT_SET)
                lcd.pins.e = PIN_NONE;
        if (lcd.pins.rs == PIN_NOT_SET)
                lcd.pins.rs = PIN_NONE;
        if (lcd.pins.rw == PIN_NOT_SET)
                lcd.pins.rw = PIN_NONE;
        if (lcd.pins.bl == PIN_NOT_SET)
                lcd.pins.bl = PIN_NONE;
        if (lcd.pins.cl == PIN_NOT_SET)
                lcd.pins.cl = PIN_NONE;
        if (lcd.pins.da == PIN_NOT_SET)
                lcd.pins.da = PIN_NONE;

        if (lcd.charset == NOT_SET)
                lcd.charset = DEFAULT_LCD_CHARSET;

        if (lcd.charset == LCD_CHARSET_KS0074)
                charlcd->char_conv = lcd_char_conv_ks0074;
        else
                charlcd->char_conv = NULL;

        pin_to_bits(lcd.pins.e, lcd_bits[LCD_PORT_D][LCD_BIT_E],
                    lcd_bits[LCD_PORT_C][LCD_BIT_E]);
        pin_to_bits(lcd.pins.rs, lcd_bits[LCD_PORT_D][LCD_BIT_RS],
                    lcd_bits[LCD_PORT_C][LCD_BIT_RS]);
        pin_to_bits(lcd.pins.rw, lcd_bits[LCD_PORT_D][LCD_BIT_RW],
                    lcd_bits[LCD_PORT_C][LCD_BIT_RW]);
        pin_to_bits(lcd.pins.bl, lcd_bits[LCD_PORT_D][LCD_BIT_BL],
                    lcd_bits[LCD_PORT_C][LCD_BIT_BL]);
        pin_to_bits(lcd.pins.cl, lcd_bits[LCD_PORT_D][LCD_BIT_CL],
                    lcd_bits[LCD_PORT_C][LCD_BIT_CL]);
        pin_to_bits(lcd.pins.da, lcd_bits[LCD_PORT_D][LCD_BIT_DA],
                    lcd_bits[LCD_PORT_C][LCD_BIT_DA]);

        lcd.charlcd = charlcd;
        lcd.initialized = true;
}

/*
 * These are the file operation function for user access to /dev/keypad
 */

static ssize_t keypad_read(struct file *file,
                           char __user *buf, size_t count, loff_t *ppos)
{
        unsigned i = *ppos;
        char __user *tmp = buf;

        if (keypad_buflen == 0) {
                if (file->f_flags & O_NONBLOCK)
                        return -EAGAIN;

                if (wait_event_interruptible(keypad_read_wait,
                                             keypad_buflen != 0))
                        return -EINTR;
        }

        for (; count-- > 0 && (keypad_buflen > 0);
             ++i, ++tmp, --keypad_buflen) {
                put_user(keypad_buffer[keypad_start], tmp);
                keypad_start = (keypad_start + 1) % KEYPAD_BUFFER;
        }
        *ppos = i;

        return tmp - buf;
}

static int keypad_open(struct inode *inode, struct file *file)
{
        int ret;

        ret = -EBUSY;
        if (!atomic_dec_and_test(&keypad_available))
                goto fail;      /* open only once at a time */

        ret = -EPERM;
        if (file->f_mode & FMODE_WRITE) /* device is read-only */
                goto fail;

        keypad_buflen = 0;      /* flush the buffer on opening */
        return 0;
 fail:
        atomic_inc(&keypad_available);
        return ret;
}

static int keypad_release(struct inode *inode, struct file *file)
{
        atomic_inc(&keypad_available);
        return 0;
}

static const struct file_operations keypad_fops = {
        .read    = keypad_read,         /* read */
        .open    = keypad_open,         /* open */
        .release = keypad_release,      /* close */
        .llseek  = default_llseek,
};

static struct miscdevice keypad_dev = {
        .minor  = KEYPAD_MINOR,
        .name   = "keypad",
        .fops   = &keypad_fops,
};

static void keypad_send_key(const char *string, int max_len)
{
        /* send the key to the device only if a process is attached to it. */
        if (!atomic_read(&keypad_available)) {
                while (max_len-- && keypad_buflen < KEYPAD_BUFFER && *string) {
                        keypad_buffer[(keypad_start + keypad_buflen++) %
                                      KEYPAD_BUFFER] = *string++;
                }
                wake_up_interruptible(&keypad_read_wait);
        }
}

/* this function scans all the bits involving at least one logical signal,
 * and puts the results in the bitfield "phys_read" (one bit per established
 * contact), and sets "phys_read_prev" to "phys_read".
 *
 * Note: to debounce input signals, we will only consider as switched a signal
 * which is stable across 2 measures. Signals which are different between two
 * reads will be kept as they previously were in their logical form (phys_prev).
 * A signal which has just switched will have a 1 in
 * (phys_read ^ phys_read_prev).
 */
static void phys_scan_contacts(void)
{
        int bit, bitval;
        char oldval;
        char bitmask;
        char gndmask;

        phys_prev = phys_curr;
        phys_read_prev = phys_read;
        phys_read = 0;          /* flush all signals */

        /* keep track of old value, with all outputs disabled */
        oldval = r_dtr(pprt) | scan_mask_o;
        /* activate all keyboard outputs (active low) */
        w_dtr(pprt, oldval & ~scan_mask_o);

        /* will have a 1 for each bit set to gnd */
        bitmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;
        /* disable all matrix signals */
        w_dtr(pprt, oldval);

        /* now that all outputs are cleared, the only active input bits are
         * directly connected to the ground
         */

        /* 1 for each grounded input */
        gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i;

        /* grounded inputs are signals 40-44 */
        phys_read |= (__u64)gndmask << 40;

        if (bitmask != gndmask) {
                /*
                 * since clearing the outputs changed some inputs, we know
                 * that some input signals are currently tied to some outputs.
                 * So we'll scan them.
                 */
                for (bit = 0; bit < 8; bit++) {
                        bitval = BIT(bit);

                        if (!(scan_mask_o & bitval))    /* skip unused bits */
                                continue;

                        w_dtr(pprt, oldval & ~bitval);  /* enable this output */
                        bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask;
                        phys_read |= (__u64)bitmask << (5 * bit);
                }
                w_dtr(pprt, oldval);    /* disable all outputs */
        }
        /*
         * this is easy: use old bits when they are flapping,
         * use new ones when stable
         */
        phys_curr = (phys_prev & (phys_read ^ phys_read_prev)) |
                    (phys_read & ~(phys_read ^ phys_read_prev));
}

static inline int input_state_high(struct logical_input *input)
{
#if 0
        /* FIXME:
         * this is an invalid test. It tries to catch
         * transitions from single-key to multiple-key, but
         * doesn't take into account the contacts polarity.
         * The only solution to the problem is to parse keys
         * from the most complex to the simplest combinations,
         * and mark them as 'caught' once a combination
         * matches, then unmatch it for all other ones.
         */

        /* try to catch dangerous transitions cases :
         * someone adds a bit, so this signal was a false
         * positive resulting from a transition. We should
         * invalidate the signal immediately and not call the
         * release function.
         * eg: 0 -(press A)-> A -(press B)-> AB : don't match A's release.
         */
        if (((phys_prev & input->mask) == input->value) &&
            ((phys_curr & input->mask) >  input->value)) {
                input->state = INPUT_ST_LOW; /* invalidate */
                return 1;
        }
#endif

        if ((phys_curr & input->mask) == input->value) {
                if ((input->type == INPUT_TYPE_STD) &&
                    (input->high_timer == 0)) {
                        input->high_timer++;
                        if (input->u.std.press_fct)
                                input->u.std.press_fct(input->u.std.press_data);
                } else if (input->type == INPUT_TYPE_KBD) {
                        /* will turn on the light */
                        keypressed = 1;

                        if (input->high_timer == 0) {
                                char *press_str = input->u.kbd.press_str;

                                if (press_str[0]) {
                                        int s = sizeof(input->u.kbd.press_str);

                                        keypad_send_key(press_str, s);
                                }
                        }

                        if (input->u.kbd.repeat_str[0]) {
                                char *repeat_str = input->u.kbd.repeat_str;

                                if (input->high_timer >= KEYPAD_REP_START) {
                                        int s = sizeof(input->u.kbd.repeat_str);

                                        input->high_timer -= KEYPAD_REP_DELAY;
                                        keypad_send_key(repeat_str, s);
                                }
                                /* we will need to come back here soon */
                                inputs_stable = 0;
                        }

                        if (input->high_timer < 255)
                                input->high_timer++;
                }
                return 1;
        }

        /* else signal falling down. Let's fall through. */
        input->state = INPUT_ST_FALLING;
        input->fall_timer = 0;

        return 0;
}

static inline void input_state_falling(struct logical_input *input)
{
#if 0
        /* FIXME !!! same comment as in input_state_high */
        if (((phys_prev & input->mask) == input->value) &&
            ((phys_curr & input->mask) >  input->value)) {
                input->state = INPUT_ST_LOW;    /* invalidate */
                return;
        }
#endif

        if ((phys_curr & input->mask) == input->value) {
                if (input->type == INPUT_TYPE_KBD) {
                        /* will turn on the light */
                        keypressed = 1;

                        if (input->u.kbd.repeat_str[0]) {
                                char *repeat_str = input->u.kbd.repeat_str;

                                if (input->high_timer >= KEYPAD_REP_START) {
                                        int s = sizeof(input->u.kbd.repeat_str);

                                        input->high_timer -= KEYPAD_REP_DELAY;
                                        keypad_send_key(repeat_str, s);
                                }
                                /* we will need to come back here soon */
                                inputs_stable = 0;
                        }

                        if (input->high_timer < 255)
                                input->high_timer++;
                }
                input->state = INPUT_ST_HIGH;
        } else if (input->fall_timer >= input->fall_time) {
                /* call release event */
                if (input->type == INPUT_TYPE_STD) {
                        void (*release_fct)(int) = input->u.std.release_fct;

                        if (release_fct)
                                release_fct(input->u.std.release_data);
                } else if (input->type == INPUT_TYPE_KBD) {
                        char *release_str = input->u.kbd.release_str;

                        if (release_str[0]) {
                                int s = sizeof(input->u.kbd.release_str);

                                keypad_send_key(release_str, s);
                        }
                }

                input->state = INPUT_ST_LOW;
        } else {
                input->fall_timer++;
                inputs_stable = 0;
        }
}

static void panel_process_inputs(void)
{
        struct logical_input *input;

        keypressed = 0;
        inputs_stable = 1;
        list_for_each_entry(input, &logical_inputs, list) {
                switch (input->state) {
                case INPUT_ST_LOW:
                        if ((phys_curr & input->mask) != input->value)
                                break;
                        /* if all needed ones were already set previously,
                         * this means that this logical signal has been
                         * activated by the releasing of another combined
                         * signal, so we don't want to match.
                         * eg: AB -(release B)-> A -(release A)-> 0 :
                         *     don't match A.
                         */
                        if ((phys_prev & input->mask) == input->value)
                                break;
                        input->rise_timer = 0;
                        input->state = INPUT_ST_RISING;
                        fallthrough;
                case INPUT_ST_RISING:
                        if ((phys_curr & input->mask) != input->value) {
                                input->state = INPUT_ST_LOW;
                                break;
                        }
                        if (input->rise_timer < input->rise_time) {
                                inputs_stable = 0;
                                input->rise_timer++;
                                break;
                        }
                        input->high_timer = 0;
                        input->state = INPUT_ST_HIGH;
                        fallthrough;
                case INPUT_ST_HIGH:
                        if (input_state_high(input))
                                break;
                        fallthrough;
                case INPUT_ST_FALLING:
                        input_state_falling(input);
                }
        }
}

static void panel_scan_timer(struct timer_list *unused)
{
        if (keypad.enabled && keypad_initialized) {
                if (spin_trylock_irq(&pprt_lock)) {
                        phys_scan_contacts();

                        /* no need for the parport anymore */
                        spin_unlock_irq(&pprt_lock);
                }

                if (!inputs_stable || phys_curr != phys_prev)
                        panel_process_inputs();
        }

        if (keypressed && lcd.enabled && lcd.initialized)
                charlcd_poke(lcd.charlcd);

        mod_timer(&scan_timer, jiffies + INPUT_POLL_TIME);
}

static void init_scan_timer(void)
{
        if (scan_timer.function)
                return;         /* already started */

        timer_setup(&scan_timer, panel_scan_timer, 0);
        scan_timer.expires = jiffies + INPUT_POLL_TIME;
        add_timer(&scan_timer);
}

/* converts a name of the form "({BbAaPpSsEe}{01234567-})*" to a series of bits.
 * if <omask> or <imask> are non-null, they will be or'ed with the bits
 * corresponding to out and in bits respectively.
 * returns 1 if ok, 0 if error (in which case, nothing is written).
 */
static u8 input_name2mask(const char *name, __u64 *mask, __u64 *value,
                          u8 *imask, u8 *omask)
{
        const char sigtab[] = "EeSsPpAaBb";
        u8 im, om;
        __u64 m, v;

        om = 0;
        im = 0;
        m = 0ULL;
        v = 0ULL;
        while (*name) {
                int in, out, bit, neg;
                const char *idx;

                idx = strchr(sigtab, *name);
                if (!idx)
                        return 0;       /* input name not found */

                in = idx - sigtab;
                neg = (in & 1); /* odd (lower) names are negated */
                in >>= 1;
                im |= BIT(in);

                name++;
                if (*name >= '0' && *name <= '7') {
                        out = *name - '0';
                        om |= BIT(out);
                } else if (*name == '-') {
                        out = 8;
                } else {
                        return 0;       /* unknown bit name */
                }

                bit = (out * 5) + in;

                m |= 1ULL << bit;
                if (!neg)
                        v |= 1ULL << bit;
                name++;
        }
        *mask = m;
        *value = v;
        if (imask)
                *imask |= im;
        if (omask)
                *omask |= om;
        return 1;
}

/* tries to bind a key to the signal name <name>. The key will send the
 * strings <press>, <repeat>, <release> for these respective events.
 * Returns the pointer to the new key if ok, NULL if the key could not be bound.
 */
static struct logical_input *panel_bind_key(const char *name, const char *press,
                                            const char *repeat,
                                            const char *release)
{
        struct logical_input *key;

        key = kzalloc(sizeof(*key), GFP_KERNEL);
        if (!key)
                return NULL;

        if (!input_name2mask(name, &key->mask, &key->value, &scan_mask_i,
                             &scan_mask_o)) {
                kfree(key);
                return NULL;
        }

        key->type = INPUT_TYPE_KBD;
        key->state = INPUT_ST_LOW;
        key->rise_time = 1;
        key->fall_time = 1;

        strncpy(key->u.kbd.press_str, press, sizeof(key->u.kbd.press_str));
        strncpy(key->u.kbd.repeat_str, repeat, sizeof(key->u.kbd.repeat_str));
        strncpy(key->u.kbd.release_str, release,
                sizeof(key->u.kbd.release_str));
        list_add(&key->list, &logical_inputs);
        return key;
}

#if 0
/* tries to bind a callback function to the signal name <name>. The function
 * <press_fct> will be called with the <press_data> arg when the signal is
 * activated, and so on for <release_fct>/<release_data>
 * Returns the pointer to the new signal if ok, NULL if the signal could not
 * be bound.
 */
static struct logical_input *panel_bind_callback(char *name,
                                                 void (*press_fct)(int),
                                                 int press_data,
                                                 void (*release_fct)(int),
                                                 int release_data)
{
        struct logical_input *callback;

        callback = kmalloc(sizeof(*callback), GFP_KERNEL);
        if (!callback)
                return NULL;

        memset(callback, 0, sizeof(struct logical_input));
        if (!input_name2mask(name, &callback->mask, &callback->value,
                             &scan_mask_i, &scan_mask_o))
                return NULL;

        callback->type = INPUT_TYPE_STD;
        callback->state = INPUT_ST_LOW;
        callback->rise_time = 1;
        callback->fall_time = 1;
        callback->u.std.press_fct = press_fct;
        callback->u.std.press_data = press_data;
        callback->u.std.release_fct = release_fct;
        callback->u.std.release_data = release_data;
        list_add(&callback->list, &logical_inputs);
        return callback;
}
#endif

static void keypad_init(void)
{
        int keynum;

        init_waitqueue_head(&keypad_read_wait);
        keypad_buflen = 0;      /* flushes any eventual noisy keystroke */

        /* Let's create all known keys */

        for (keynum = 0; keypad_profile[keynum][0][0]; keynum++) {
                panel_bind_key(keypad_profile[keynum][0],
                               keypad_profile[keynum][1],
                               keypad_profile[keynum][2],
                               keypad_profile[keynum][3]);
        }

        init_scan_timer();
        keypad_initialized = 1;
}

/**************************************************/
/* device initialization                          */
/**************************************************/

static void panel_attach(struct parport *port)
{
        struct pardev_cb panel_cb;

        if (port->number != parport)
                return;

        if (pprt) {
                pr_err("%s: port->number=%d parport=%d, already registered!\n",
                       __func__, port->number, parport);
                return;
        }

        memset(&panel_cb, 0, sizeof(panel_cb));
        panel_cb.private = &pprt;
        /* panel_cb.flags = 0 should be PARPORT_DEV_EXCL? */

        pprt = parport_register_dev_model(port, "panel", &panel_cb, 0);
        if (!pprt) {
                pr_err("%s: port->number=%d parport=%d, parport_register_device() failed\n",
                       __func__, port->number, parport);
                return;
        }

        if (parport_claim(pprt)) {
                pr_err("could not claim access to parport%d. Aborting.\n",
                       parport);
                goto err_unreg_device;
        }

        /* must init LCD first, just in case an IRQ from the keypad is
         * generated at keypad init
         */
        if (lcd.enabled) {
                lcd_init();
                if (!lcd.charlcd || charlcd_register(lcd.charlcd))
                        goto err_unreg_device;
        }

        if (keypad.enabled) {
                keypad_init();
                if (misc_register(&keypad_dev))
                        goto err_lcd_unreg;
        }
        return;

err_lcd_unreg:
        if (scan_timer.function)
                del_timer_sync(&scan_timer);
        if (lcd.enabled)
                charlcd_unregister(lcd.charlcd);
err_unreg_device:
        kfree(lcd.charlcd);
        lcd.charlcd = NULL;
        parport_unregister_device(pprt);
        pprt = NULL;
}

static void panel_detach(struct parport *port)
{
        if (port->number != parport)
                return;

        if (!pprt) {
                pr_err("%s: port->number=%d parport=%d, nothing to unregister.\n",
                       __func__, port->number, parport);
                return;
        }
        if (scan_timer.function)
                del_timer_sync(&scan_timer);

        if (keypad.enabled) {
                misc_deregister(&keypad_dev);
                keypad_initialized = 0;
        }

        if (lcd.enabled) {
                charlcd_unregister(lcd.charlcd);
                lcd.initialized = false;
                kfree(lcd.charlcd->drvdata);
                kfree(lcd.charlcd);
                lcd.charlcd = NULL;
        }

        /* TODO: free all input signals */
        parport_release(pprt);
        parport_unregister_device(pprt);
        pprt = NULL;
}

static struct parport_driver panel_driver = {
        .name = "panel",
        .match_port = panel_attach,
        .detach = panel_detach,
        .devmodel = true,
};

/* init function */
static int __init panel_init_module(void)
{
        int selected_keypad_type = NOT_SET, err;

        /* take care of an eventual profile */
        switch (profile) {
        case PANEL_PROFILE_CUSTOM:
                /* custom profile */
                selected_keypad_type = DEFAULT_KEYPAD_TYPE;
                selected_lcd_type = DEFAULT_LCD_TYPE;
                break;
        case PANEL_PROFILE_OLD:
                /* 8 bits, 2*16, old keypad */
                selected_keypad_type = KEYPAD_TYPE_OLD;
                selected_lcd_type = LCD_TYPE_OLD;

                /* TODO: This two are a little hacky, sort it out later */
                if (lcd_width == NOT_SET)
                        lcd_width = 16;
                if (lcd_hwidth == NOT_SET)
                        lcd_hwidth = 16;
                break;
        case PANEL_PROFILE_NEW:
                /* serial, 2*16, new keypad */
                selected_keypad_type = KEYPAD_TYPE_NEW;
                selected_lcd_type = LCD_TYPE_KS0074;
                break;
        case PANEL_PROFILE_HANTRONIX:
                /* 8 bits, 2*16 hantronix-like, no keypad */
                selected_keypad_type = KEYPAD_TYPE_NONE;
                selected_lcd_type = LCD_TYPE_HANTRONIX;
                break;
        case PANEL_PROFILE_NEXCOM:
                /* generic 8 bits, 2*16, nexcom keypad, eg. Nexcom. */
                selected_keypad_type = KEYPAD_TYPE_NEXCOM;
                selected_lcd_type = LCD_TYPE_NEXCOM;
                break;
        case PANEL_PROFILE_LARGE:
                /* 8 bits, 2*40, old keypad */
                selected_keypad_type = KEYPAD_TYPE_OLD;
                selected_lcd_type = LCD_TYPE_OLD;
                break;
        }

        /*
         * Overwrite selection with module param values (both keypad and lcd),
         * where the deprecated params have lower prio.
         */
        if (keypad_enabled != NOT_SET)
                selected_keypad_type = keypad_enabled;
        if (keypad_type != NOT_SET)
                selected_keypad_type = keypad_type;

        keypad.enabled = (selected_keypad_type > 0);

        if (lcd_enabled != NOT_SET)
                selected_lcd_type = lcd_enabled;
        if (lcd_type != NOT_SET)
                selected_lcd_type = lcd_type;

        lcd.enabled = (selected_lcd_type > 0);

        if (lcd.enabled) {
                /*
                 * Init lcd struct with load-time values to preserve exact
                 * current functionality (at least for now).
                 */
                lcd.charset = lcd_charset;
                lcd.proto = lcd_proto;
                lcd.pins.e = lcd_e_pin;
                lcd.pins.rs = lcd_rs_pin;
                lcd.pins.rw = lcd_rw_pin;
                lcd.pins.cl = lcd_cl_pin;
                lcd.pins.da = lcd_da_pin;
                lcd.pins.bl = lcd_bl_pin;
        }

        switch (selected_keypad_type) {
        case KEYPAD_TYPE_OLD:
                keypad_profile = old_keypad_profile;
                break;
        case KEYPAD_TYPE_NEW:
                keypad_profile = new_keypad_profile;
                break;
        case KEYPAD_TYPE_NEXCOM:
                keypad_profile = nexcom_keypad_profile;
                break;
        default:
                keypad_profile = NULL;
                break;
        }

        if (!lcd.enabled && !keypad.enabled) {
                /* no device enabled, let's exit */
                pr_err("panel driver disabled.\n");
                return -ENODEV;
        }

        err = parport_register_driver(&panel_driver);
        if (err) {
                pr_err("could not register with parport. Aborting.\n");
                return err;
        }

        if (pprt)
                pr_info("panel driver registered on parport%d (io=0x%lx).\n",
                        parport, pprt->port->base);
        else
                pr_info("panel driver not yet registered\n");
        return 0;
}

static void __exit panel_cleanup_module(void)
{
        parport_unregister_driver(&panel_driver);
}

module_init(panel_init_module);
module_exit(panel_cleanup_module);
MODULE_AUTHOR("Willy Tarreau");
MODULE_LICENSE("GPL");

/*
 * Local variables:
 *  c-indent-level: 4
 *  tab-width: 8
 * End:
 */