2 * Disk Array driver for HP SA 5xxx and 6xxx Controllers
3 * Copyright 2000, 2006 Hewlett-Packard Development Company, L.P.
5 * This program is free software; you can redistribute it and/or modify
6 * it under the terms of the GNU General Public License as published by
7 * the Free Software Foundation; either version 2 of the License, or
8 * (at your option) any later version.
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
13 * NON INFRINGEMENT. See the GNU General Public License for more details.
15 * You should have received a copy of the GNU General Public License
16 * along with this program; if not, write to the Free Software
17 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
19 * Questions/Comments/Bugfixes to iss_storagedev@hp.com
23 #include <linux/module.h>
24 #include <linux/interrupt.h>
25 #include <linux/types.h>
26 #include <linux/pci.h>
27 #include <linux/kernel.h>
28 #include <linux/slab.h>
29 #include <linux/delay.h>
30 #include <linux/major.h>
32 #include <linux/bio.h>
33 #include <linux/blkpg.h>
34 #include <linux/timer.h>
35 #include <linux/proc_fs.h>
36 #include <linux/init.h>
37 #include <linux/hdreg.h>
38 #include <linux/spinlock.h>
39 #include <linux/compat.h>
40 #include <linux/blktrace_api.h>
41 #include <asm/uaccess.h>
44 #include <linux/dma-mapping.h>
45 #include <linux/blkdev.h>
46 #include <linux/genhd.h>
47 #include <linux/completion.h>
49 #define CCISS_DRIVER_VERSION(maj,min,submin) ((maj<<16)|(min<<8)|(submin))
50 #define DRIVER_NAME "HP CISS Driver (v 3.6.14)"
51 #define DRIVER_VERSION CCISS_DRIVER_VERSION(3,6,14)
53 /* Embedded module documentation macros - see modules.h */
54 MODULE_AUTHOR("Hewlett-Packard Company");
55 MODULE_DESCRIPTION("Driver for HP Controller SA5xxx SA6xxx version 3.6.14");
56 MODULE_SUPPORTED_DEVICE("HP SA5i SA5i+ SA532 SA5300 SA5312 SA641 SA642 SA6400"
57 " SA6i P600 P800 P400 P400i E200 E200i E500");
58 MODULE_VERSION("3.6.14");
59 MODULE_LICENSE("GPL");
61 #include "cciss_cmd.h"
63 #include <linux/cciss_ioctl.h>
65 /* define the PCI info for the cards we can control */
66 static const struct pci_device_id cciss_pci_device_id
[] = {
67 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISS
, 0x0E11, 0x4070},
68 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4080},
69 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4082},
70 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSB
, 0x0E11, 0x4083},
71 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x4091},
72 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409A},
73 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409B},
74 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409C},
75 {PCI_VENDOR_ID_COMPAQ
, PCI_DEVICE_ID_COMPAQ_CISSC
, 0x0E11, 0x409D},
76 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSA
, 0x103C, 0x3225},
77 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3223},
78 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3234},
79 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3235},
80 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3211},
81 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3212},
82 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3213},
83 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3214},
84 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSD
, 0x103C, 0x3215},
85 {PCI_VENDOR_ID_HP
, PCI_DEVICE_ID_HP_CISSC
, 0x103C, 0x3237},
86 {PCI_VENDOR_ID_HP
, PCI_ANY_ID
, PCI_ANY_ID
, PCI_ANY_ID
,
87 PCI_CLASS_STORAGE_RAID
<< 8, 0xffff << 8, 0},
91 MODULE_DEVICE_TABLE(pci
, cciss_pci_device_id
);
93 /* board_id = Subsystem Device ID & Vendor ID
94 * product = Marketing Name for the board
95 * access = Address of the struct of function pointers
96 * nr_cmds = Number of commands supported by controller
98 static struct board_type products
[] = {
99 {0x40700E11, "Smart Array 5300", &SA5_access
, 512},
100 {0x40800E11, "Smart Array 5i", &SA5B_access
, 512},
101 {0x40820E11, "Smart Array 532", &SA5B_access
, 512},
102 {0x40830E11, "Smart Array 5312", &SA5B_access
, 512},
103 {0x409A0E11, "Smart Array 641", &SA5_access
, 512},
104 {0x409B0E11, "Smart Array 642", &SA5_access
, 512},
105 {0x409C0E11, "Smart Array 6400", &SA5_access
, 512},
106 {0x409D0E11, "Smart Array 6400 EM", &SA5_access
, 512},
107 {0x40910E11, "Smart Array 6i", &SA5_access
, 512},
108 {0x3225103C, "Smart Array P600", &SA5_access
, 512},
109 {0x3223103C, "Smart Array P800", &SA5_access
, 512},
110 {0x3234103C, "Smart Array P400", &SA5_access
, 512},
111 {0x3235103C, "Smart Array P400i", &SA5_access
, 512},
112 {0x3211103C, "Smart Array E200i", &SA5_access
, 120},
113 {0x3212103C, "Smart Array E200", &SA5_access
, 120},
114 {0x3213103C, "Smart Array E200i", &SA5_access
, 120},
115 {0x3214103C, "Smart Array E200i", &SA5_access
, 120},
116 {0x3215103C, "Smart Array E200i", &SA5_access
, 120},
117 {0x3237103C, "Smart Array E500", &SA5_access
, 512},
118 {0xFFFF103C, "Unknown Smart Array", &SA5_access
, 120},
121 /* How long to wait (in milliseconds) for board to go into simple mode */
122 #define MAX_CONFIG_WAIT 30000
123 #define MAX_IOCTL_CONFIG_WAIT 1000
125 /*define how many times we will try a command because of bus resets */
126 #define MAX_CMD_RETRIES 3
128 #define READ_AHEAD 1024
131 /* Originally cciss driver only supports 8 major numbers */
132 #define MAX_CTLR_ORIG 8
134 static ctlr_info_t
*hba
[MAX_CTLR
];
136 static void do_cciss_request(request_queue_t
*q
);
137 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
);
138 static int cciss_open(struct inode
*inode
, struct file
*filep
);
139 static int cciss_release(struct inode
*inode
, struct file
*filep
);
140 static int cciss_ioctl(struct inode
*inode
, struct file
*filep
,
141 unsigned int cmd
, unsigned long arg
);
142 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
);
144 static int revalidate_allvol(ctlr_info_t
*host
);
145 static int cciss_revalidate(struct gendisk
*disk
);
146 static int rebuild_lun_table(ctlr_info_t
*h
, struct gendisk
*del_disk
);
147 static int deregister_disk(struct gendisk
*disk
, drive_info_struct
*drv
,
150 static void cciss_read_capacity(int ctlr
, int logvol
, int withirq
,
151 sector_t
*total_size
, unsigned int *block_size
);
152 static void cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
,
153 sector_t
*total_size
, unsigned int *block_size
);
154 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
155 int withirq
, sector_t total_size
,
156 unsigned int block_size
, InquiryData_struct
*inq_buff
,
157 drive_info_struct
*drv
);
158 static void cciss_getgeometry(int cntl_num
);
159 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*, struct pci_dev
*,
161 static void start_io(ctlr_info_t
*h
);
162 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
163 unsigned int use_unit_num
, unsigned int log_unit
,
164 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
);
165 static int sendcmd_withirq(__u8 cmd
, int ctlr
, void *buff
, size_t size
,
166 unsigned int use_unit_num
, unsigned int log_unit
,
167 __u8 page_code
, int cmd_type
);
169 static void fail_all_cmds(unsigned long ctlr
);
171 #ifdef CONFIG_PROC_FS
172 static int cciss_proc_get_info(char *buffer
, char **start
, off_t offset
,
173 int length
, int *eof
, void *data
);
174 static void cciss_procinit(int i
);
176 static void cciss_procinit(int i
)
179 #endif /* CONFIG_PROC_FS */
182 static long cciss_compat_ioctl(struct file
*f
, unsigned cmd
, unsigned long arg
);
185 static struct block_device_operations cciss_fops
= {
186 .owner
= THIS_MODULE
,
188 .release
= cciss_release
,
189 .ioctl
= cciss_ioctl
,
190 .getgeo
= cciss_getgeo
,
192 .compat_ioctl
= cciss_compat_ioctl
,
194 .revalidate_disk
= cciss_revalidate
,
198 * Enqueuing and dequeuing functions for cmdlists.
200 static inline void addQ(CommandList_struct
**Qptr
, CommandList_struct
*c
)
204 c
->next
= c
->prev
= c
;
206 c
->prev
= (*Qptr
)->prev
;
208 (*Qptr
)->prev
->next
= c
;
213 static inline CommandList_struct
*removeQ(CommandList_struct
**Qptr
,
214 CommandList_struct
*c
)
216 if (c
&& c
->next
!= c
) {
219 c
->prev
->next
= c
->next
;
220 c
->next
->prev
= c
->prev
;
227 #include "cciss_scsi.c" /* For SCSI tape support */
229 #ifdef CONFIG_PROC_FS
232 * Report information about this controller.
234 #define ENG_GIG 1000000000
235 #define ENG_GIG_FACTOR (ENG_GIG/512)
236 #define RAID_UNKNOWN 6
237 static const char *raid_label
[] = { "0", "4", "1(1+0)", "5", "5+1", "ADG",
241 static struct proc_dir_entry
*proc_cciss
;
243 static int cciss_proc_get_info(char *buffer
, char **start
, off_t offset
,
244 int length
, int *eof
, void *data
)
249 ctlr_info_t
*h
= (ctlr_info_t
*) data
;
250 drive_info_struct
*drv
;
252 sector_t vol_sz
, vol_sz_frac
;
256 /* prevent displaying bogus info during configuration
257 * or deconfiguration of a logical volume
259 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
260 if (h
->busy_configuring
) {
261 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
264 h
->busy_configuring
= 1;
265 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
267 size
= sprintf(buffer
, "%s: HP %s Controller\n"
268 "Board ID: 0x%08lx\n"
269 "Firmware Version: %c%c%c%c\n"
271 "Logical drives: %d\n"
273 "Current Q depth: %d\n"
274 "Current # commands on controller: %d\n"
275 "Max Q depth since init: %d\n"
276 "Max # commands on controller since init: %d\n"
277 "Max SG entries since init: %d\n\n",
280 (unsigned long)h
->board_id
,
281 h
->firm_ver
[0], h
->firm_ver
[1], h
->firm_ver
[2],
282 h
->firm_ver
[3], (unsigned int)h
->intr
[SIMPLE_MODE_INT
],
284 h
->cciss_max_sectors
,
285 h
->Qdepth
, h
->commands_outstanding
,
286 h
->maxQsinceinit
, h
->max_outstanding
, h
->maxSG
);
290 cciss_proc_tape_report(ctlr
, buffer
, &pos
, &len
);
291 for (i
= 0; i
<= h
->highest_lun
; i
++) {
297 vol_sz
= drv
->nr_blocks
;
298 vol_sz_frac
= sector_div(vol_sz
, ENG_GIG_FACTOR
);
300 sector_div(vol_sz_frac
, ENG_GIG_FACTOR
);
302 if (drv
->raid_level
> 5)
303 drv
->raid_level
= RAID_UNKNOWN
;
304 size
= sprintf(buffer
+ len
, "cciss/c%dd%d:"
305 "\t%4u.%02uGB\tRAID %s\n",
306 ctlr
, i
, (int)vol_sz
, (int)vol_sz_frac
,
307 raid_label
[drv
->raid_level
]);
313 *start
= buffer
+ offset
;
317 h
->busy_configuring
= 0;
322 cciss_proc_write(struct file
*file
, const char __user
*buffer
,
323 unsigned long count
, void *data
)
325 unsigned char cmd
[80];
327 #ifdef CONFIG_CISS_SCSI_TAPE
328 ctlr_info_t
*h
= (ctlr_info_t
*) data
;
332 if (count
> sizeof(cmd
) - 1)
334 if (copy_from_user(cmd
, buffer
, count
))
337 len
= strlen(cmd
); // above 3 lines ensure safety
338 if (len
&& cmd
[len
- 1] == '\n')
340 # ifdef CONFIG_CISS_SCSI_TAPE
341 if (strcmp("engage scsi", cmd
) == 0) {
342 rc
= cciss_engage_scsi(h
->ctlr
);
347 /* might be nice to have "disengage" too, but it's not
348 safely possible. (only 1 module use count, lock issues.) */
354 * Get us a file in /proc/cciss that says something about each controller.
355 * Create /proc/cciss if it doesn't exist yet.
357 static void __devinit
cciss_procinit(int i
)
359 struct proc_dir_entry
*pde
;
361 if (proc_cciss
== NULL
) {
362 proc_cciss
= proc_mkdir("cciss", proc_root_driver
);
367 pde
= create_proc_read_entry(hba
[i
]->devname
,
368 S_IWUSR
| S_IRUSR
| S_IRGRP
| S_IROTH
,
369 proc_cciss
, cciss_proc_get_info
, hba
[i
]);
370 pde
->write_proc
= cciss_proc_write
;
372 #endif /* CONFIG_PROC_FS */
375 * For operations that cannot sleep, a command block is allocated at init,
376 * and managed by cmd_alloc() and cmd_free() using a simple bitmap to track
377 * which ones are free or in use. For operations that can wait for kmalloc
378 * to possible sleep, this routine can be called with get_from_pool set to 0.
379 * cmd_free() MUST be called with a got_from_pool set to 0 if cmd_alloc was.
381 static CommandList_struct
*cmd_alloc(ctlr_info_t
*h
, int get_from_pool
)
383 CommandList_struct
*c
;
386 dma_addr_t cmd_dma_handle
, err_dma_handle
;
388 if (!get_from_pool
) {
389 c
= (CommandList_struct
*) pci_alloc_consistent(h
->pdev
,
390 sizeof(CommandList_struct
), &cmd_dma_handle
);
393 memset(c
, 0, sizeof(CommandList_struct
));
397 c
->err_info
= (ErrorInfo_struct
*)
398 pci_alloc_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
401 if (c
->err_info
== NULL
) {
402 pci_free_consistent(h
->pdev
,
403 sizeof(CommandList_struct
), c
, cmd_dma_handle
);
406 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
407 } else { /* get it out of the controllers pool */
410 i
= find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
);
413 } while (test_and_set_bit
414 (i
& (BITS_PER_LONG
- 1),
415 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
)) != 0);
417 printk(KERN_DEBUG
"cciss: using command buffer %d\n", i
);
420 memset(c
, 0, sizeof(CommandList_struct
));
421 cmd_dma_handle
= h
->cmd_pool_dhandle
422 + i
* sizeof(CommandList_struct
);
423 c
->err_info
= h
->errinfo_pool
+ i
;
424 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
425 err_dma_handle
= h
->errinfo_pool_dhandle
426 + i
* sizeof(ErrorInfo_struct
);
432 c
->busaddr
= (__u32
) cmd_dma_handle
;
433 temp64
.val
= (__u64
) err_dma_handle
;
434 c
->ErrDesc
.Addr
.lower
= temp64
.val32
.lower
;
435 c
->ErrDesc
.Addr
.upper
= temp64
.val32
.upper
;
436 c
->ErrDesc
.Len
= sizeof(ErrorInfo_struct
);
443 * Frees a command block that was previously allocated with cmd_alloc().
445 static void cmd_free(ctlr_info_t
*h
, CommandList_struct
*c
, int got_from_pool
)
450 if (!got_from_pool
) {
451 temp64
.val32
.lower
= c
->ErrDesc
.Addr
.lower
;
452 temp64
.val32
.upper
= c
->ErrDesc
.Addr
.upper
;
453 pci_free_consistent(h
->pdev
, sizeof(ErrorInfo_struct
),
454 c
->err_info
, (dma_addr_t
) temp64
.val
);
455 pci_free_consistent(h
->pdev
, sizeof(CommandList_struct
),
456 c
, (dma_addr_t
) c
->busaddr
);
459 clear_bit(i
& (BITS_PER_LONG
- 1),
460 h
->cmd_pool_bits
+ (i
/ BITS_PER_LONG
));
465 static inline ctlr_info_t
*get_host(struct gendisk
*disk
)
467 return disk
->queue
->queuedata
;
470 static inline drive_info_struct
*get_drv(struct gendisk
*disk
)
472 return disk
->private_data
;
476 * Open. Make sure the device is really there.
478 static int cciss_open(struct inode
*inode
, struct file
*filep
)
480 ctlr_info_t
*host
= get_host(inode
->i_bdev
->bd_disk
);
481 drive_info_struct
*drv
= get_drv(inode
->i_bdev
->bd_disk
);
484 printk(KERN_DEBUG
"cciss_open %s\n", inode
->i_bdev
->bd_disk
->disk_name
);
485 #endif /* CCISS_DEBUG */
487 if (host
->busy_initializing
|| drv
->busy_configuring
)
490 * Root is allowed to open raw volume zero even if it's not configured
491 * so array config can still work. Root is also allowed to open any
492 * volume that has a LUN ID, so it can issue IOCTL to reread the
493 * disk information. I don't think I really like this
494 * but I'm already using way to many device nodes to claim another one
495 * for "raw controller".
497 if (drv
->heads
== 0) {
498 if (iminor(inode
) != 0) { /* not node 0? */
499 /* if not node 0 make sure it is a partition = 0 */
500 if (iminor(inode
) & 0x0f) {
502 /* if it is, make sure we have a LUN ID */
503 } else if (drv
->LunID
== 0) {
507 if (!capable(CAP_SYS_ADMIN
))
518 static int cciss_release(struct inode
*inode
, struct file
*filep
)
520 ctlr_info_t
*host
= get_host(inode
->i_bdev
->bd_disk
);
521 drive_info_struct
*drv
= get_drv(inode
->i_bdev
->bd_disk
);
524 printk(KERN_DEBUG
"cciss_release %s\n",
525 inode
->i_bdev
->bd_disk
->disk_name
);
526 #endif /* CCISS_DEBUG */
535 static int do_ioctl(struct file
*f
, unsigned cmd
, unsigned long arg
)
539 ret
= cciss_ioctl(f
->f_dentry
->d_inode
, f
, cmd
, arg
);
544 static int cciss_ioctl32_passthru(struct file
*f
, unsigned cmd
,
546 static int cciss_ioctl32_big_passthru(struct file
*f
, unsigned cmd
,
549 static long cciss_compat_ioctl(struct file
*f
, unsigned cmd
, unsigned long arg
)
552 case CCISS_GETPCIINFO
:
553 case CCISS_GETINTINFO
:
554 case CCISS_SETINTINFO
:
555 case CCISS_GETNODENAME
:
556 case CCISS_SETNODENAME
:
557 case CCISS_GETHEARTBEAT
:
558 case CCISS_GETBUSTYPES
:
559 case CCISS_GETFIRMVER
:
560 case CCISS_GETDRIVVER
:
561 case CCISS_REVALIDVOLS
:
562 case CCISS_DEREGDISK
:
563 case CCISS_REGNEWDISK
:
565 case CCISS_RESCANDISK
:
566 case CCISS_GETLUNINFO
:
567 return do_ioctl(f
, cmd
, arg
);
569 case CCISS_PASSTHRU32
:
570 return cciss_ioctl32_passthru(f
, cmd
, arg
);
571 case CCISS_BIG_PASSTHRU32
:
572 return cciss_ioctl32_big_passthru(f
, cmd
, arg
);
579 static int cciss_ioctl32_passthru(struct file
*f
, unsigned cmd
,
582 IOCTL32_Command_struct __user
*arg32
=
583 (IOCTL32_Command_struct __user
*) arg
;
584 IOCTL_Command_struct arg64
;
585 IOCTL_Command_struct __user
*p
= compat_alloc_user_space(sizeof(arg64
));
591 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
592 sizeof(arg64
.LUN_info
));
594 copy_from_user(&arg64
.Request
, &arg32
->Request
,
595 sizeof(arg64
.Request
));
597 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
598 sizeof(arg64
.error_info
));
599 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
600 err
|= get_user(cp
, &arg32
->buf
);
601 arg64
.buf
= compat_ptr(cp
);
602 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
607 err
= do_ioctl(f
, CCISS_PASSTHRU
, (unsigned long)p
);
611 copy_in_user(&arg32
->error_info
, &p
->error_info
,
612 sizeof(arg32
->error_info
));
618 static int cciss_ioctl32_big_passthru(struct file
*file
, unsigned cmd
,
621 BIG_IOCTL32_Command_struct __user
*arg32
=
622 (BIG_IOCTL32_Command_struct __user
*) arg
;
623 BIG_IOCTL_Command_struct arg64
;
624 BIG_IOCTL_Command_struct __user
*p
=
625 compat_alloc_user_space(sizeof(arg64
));
631 copy_from_user(&arg64
.LUN_info
, &arg32
->LUN_info
,
632 sizeof(arg64
.LUN_info
));
634 copy_from_user(&arg64
.Request
, &arg32
->Request
,
635 sizeof(arg64
.Request
));
637 copy_from_user(&arg64
.error_info
, &arg32
->error_info
,
638 sizeof(arg64
.error_info
));
639 err
|= get_user(arg64
.buf_size
, &arg32
->buf_size
);
640 err
|= get_user(arg64
.malloc_size
, &arg32
->malloc_size
);
641 err
|= get_user(cp
, &arg32
->buf
);
642 arg64
.buf
= compat_ptr(cp
);
643 err
|= copy_to_user(p
, &arg64
, sizeof(arg64
));
648 err
= do_ioctl(file
, CCISS_BIG_PASSTHRU
, (unsigned long)p
);
652 copy_in_user(&arg32
->error_info
, &p
->error_info
,
653 sizeof(arg32
->error_info
));
660 static int cciss_getgeo(struct block_device
*bdev
, struct hd_geometry
*geo
)
662 drive_info_struct
*drv
= get_drv(bdev
->bd_disk
);
667 geo
->heads
= drv
->heads
;
668 geo
->sectors
= drv
->sectors
;
669 geo
->cylinders
= drv
->cylinders
;
676 static int cciss_ioctl(struct inode
*inode
, struct file
*filep
,
677 unsigned int cmd
, unsigned long arg
)
679 struct block_device
*bdev
= inode
->i_bdev
;
680 struct gendisk
*disk
= bdev
->bd_disk
;
681 ctlr_info_t
*host
= get_host(disk
);
682 drive_info_struct
*drv
= get_drv(disk
);
683 int ctlr
= host
->ctlr
;
684 void __user
*argp
= (void __user
*)arg
;
687 printk(KERN_DEBUG
"cciss_ioctl: Called with cmd=%x %lx\n", cmd
, arg
);
688 #endif /* CCISS_DEBUG */
691 case CCISS_GETPCIINFO
:
693 cciss_pci_info_struct pciinfo
;
697 pciinfo
.domain
= pci_domain_nr(host
->pdev
->bus
);
698 pciinfo
.bus
= host
->pdev
->bus
->number
;
699 pciinfo
.dev_fn
= host
->pdev
->devfn
;
700 pciinfo
.board_id
= host
->board_id
;
702 (argp
, &pciinfo
, sizeof(cciss_pci_info_struct
)))
706 case CCISS_GETINTINFO
:
708 cciss_coalint_struct intinfo
;
712 readl(&host
->cfgtable
->HostWrite
.CoalIntDelay
);
714 readl(&host
->cfgtable
->HostWrite
.CoalIntCount
);
716 (argp
, &intinfo
, sizeof(cciss_coalint_struct
)))
720 case CCISS_SETINTINFO
:
722 cciss_coalint_struct intinfo
;
728 if (!capable(CAP_SYS_ADMIN
))
731 (&intinfo
, argp
, sizeof(cciss_coalint_struct
)))
733 if ((intinfo
.delay
== 0) && (intinfo
.count
== 0))
735 // printk("cciss_ioctl: delay and count cannot be 0\n");
738 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
739 /* Update the field, and then ring the doorbell */
740 writel(intinfo
.delay
,
741 &(host
->cfgtable
->HostWrite
.CoalIntDelay
));
742 writel(intinfo
.count
,
743 &(host
->cfgtable
->HostWrite
.CoalIntCount
));
744 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
746 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
747 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
750 /* delay and try again */
753 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
754 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
758 case CCISS_GETNODENAME
:
760 NodeName_type NodeName
;
765 for (i
= 0; i
< 16; i
++)
767 readb(&host
->cfgtable
->ServerName
[i
]);
768 if (copy_to_user(argp
, NodeName
, sizeof(NodeName_type
)))
772 case CCISS_SETNODENAME
:
774 NodeName_type NodeName
;
780 if (!capable(CAP_SYS_ADMIN
))
784 (NodeName
, argp
, sizeof(NodeName_type
)))
787 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
789 /* Update the field, and then ring the doorbell */
790 for (i
= 0; i
< 16; i
++)
792 &host
->cfgtable
->ServerName
[i
]);
794 writel(CFGTBL_ChangeReq
, host
->vaddr
+ SA5_DOORBELL
);
796 for (i
= 0; i
< MAX_IOCTL_CONFIG_WAIT
; i
++) {
797 if (!(readl(host
->vaddr
+ SA5_DOORBELL
)
800 /* delay and try again */
803 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
804 if (i
>= MAX_IOCTL_CONFIG_WAIT
)
809 case CCISS_GETHEARTBEAT
:
811 Heartbeat_type heartbeat
;
815 heartbeat
= readl(&host
->cfgtable
->HeartBeat
);
817 (argp
, &heartbeat
, sizeof(Heartbeat_type
)))
821 case CCISS_GETBUSTYPES
:
823 BusTypes_type BusTypes
;
827 BusTypes
= readl(&host
->cfgtable
->BusTypes
);
829 (argp
, &BusTypes
, sizeof(BusTypes_type
)))
833 case CCISS_GETFIRMVER
:
835 FirmwareVer_type firmware
;
839 memcpy(firmware
, host
->firm_ver
, 4);
842 (argp
, firmware
, sizeof(FirmwareVer_type
)))
846 case CCISS_GETDRIVVER
:
848 DriverVer_type DriverVer
= DRIVER_VERSION
;
854 (argp
, &DriverVer
, sizeof(DriverVer_type
)))
859 case CCISS_REVALIDVOLS
:
860 if (bdev
!= bdev
->bd_contains
|| drv
!= host
->drv
)
862 return revalidate_allvol(host
);
864 case CCISS_GETLUNINFO
:{
865 LogvolInfo_struct luninfo
;
867 luninfo
.LunID
= drv
->LunID
;
868 luninfo
.num_opens
= drv
->usage_count
;
869 luninfo
.num_parts
= 0;
870 if (copy_to_user(argp
, &luninfo
,
871 sizeof(LogvolInfo_struct
)))
875 case CCISS_DEREGDISK
:
876 return rebuild_lun_table(host
, disk
);
879 return rebuild_lun_table(host
, NULL
);
883 IOCTL_Command_struct iocommand
;
884 CommandList_struct
*c
;
888 DECLARE_COMPLETION_ONSTACK(wait
);
893 if (!capable(CAP_SYS_RAWIO
))
897 (&iocommand
, argp
, sizeof(IOCTL_Command_struct
)))
899 if ((iocommand
.buf_size
< 1) &&
900 (iocommand
.Request
.Type
.Direction
!= XFER_NONE
)) {
903 #if 0 /* 'buf_size' member is 16-bits, and always smaller than kmalloc limit */
904 /* Check kmalloc limits */
905 if (iocommand
.buf_size
> 128000)
908 if (iocommand
.buf_size
> 0) {
909 buff
= kmalloc(iocommand
.buf_size
, GFP_KERNEL
);
913 if (iocommand
.Request
.Type
.Direction
== XFER_WRITE
) {
914 /* Copy the data into the buffer we created */
916 (buff
, iocommand
.buf
, iocommand
.buf_size
)) {
921 memset(buff
, 0, iocommand
.buf_size
);
923 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
927 // Fill in the command type
928 c
->cmd_type
= CMD_IOCTL_PEND
;
929 // Fill in Command Header
930 c
->Header
.ReplyQueue
= 0; // unused in simple mode
931 if (iocommand
.buf_size
> 0) // buffer to fill
933 c
->Header
.SGList
= 1;
934 c
->Header
.SGTotal
= 1;
935 } else // no buffers to fill
937 c
->Header
.SGList
= 0;
938 c
->Header
.SGTotal
= 0;
940 c
->Header
.LUN
= iocommand
.LUN_info
;
941 c
->Header
.Tag
.lower
= c
->busaddr
; // use the kernel address the cmd block for tag
943 // Fill in Request block
944 c
->Request
= iocommand
.Request
;
946 // Fill in the scatter gather information
947 if (iocommand
.buf_size
> 0) {
948 temp64
.val
= pci_map_single(host
->pdev
, buff
,
950 PCI_DMA_BIDIRECTIONAL
);
951 c
->SG
[0].Addr
.lower
= temp64
.val32
.lower
;
952 c
->SG
[0].Addr
.upper
= temp64
.val32
.upper
;
953 c
->SG
[0].Len
= iocommand
.buf_size
;
954 c
->SG
[0].Ext
= 0; // we are not chaining
958 /* Put the request on the tail of the request queue */
959 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
960 addQ(&host
->reqQ
, c
);
963 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
965 wait_for_completion(&wait
);
967 /* unlock the buffers from DMA */
968 temp64
.val32
.lower
= c
->SG
[0].Addr
.lower
;
969 temp64
.val32
.upper
= c
->SG
[0].Addr
.upper
;
970 pci_unmap_single(host
->pdev
, (dma_addr_t
) temp64
.val
,
972 PCI_DMA_BIDIRECTIONAL
);
974 /* Copy the error information out */
975 iocommand
.error_info
= *(c
->err_info
);
977 (argp
, &iocommand
, sizeof(IOCTL_Command_struct
))) {
979 cmd_free(host
, c
, 0);
983 if (iocommand
.Request
.Type
.Direction
== XFER_READ
) {
984 /* Copy the data out of the buffer we created */
986 (iocommand
.buf
, buff
, iocommand
.buf_size
)) {
988 cmd_free(host
, c
, 0);
993 cmd_free(host
, c
, 0);
996 case CCISS_BIG_PASSTHRU
:{
997 BIG_IOCTL_Command_struct
*ioc
;
998 CommandList_struct
*c
;
999 unsigned char **buff
= NULL
;
1000 int *buff_size
= NULL
;
1002 unsigned long flags
;
1006 DECLARE_COMPLETION_ONSTACK(wait
);
1009 BYTE __user
*data_ptr
;
1013 if (!capable(CAP_SYS_RAWIO
))
1015 ioc
= (BIG_IOCTL_Command_struct
*)
1016 kmalloc(sizeof(*ioc
), GFP_KERNEL
);
1021 if (copy_from_user(ioc
, argp
, sizeof(*ioc
))) {
1025 if ((ioc
->buf_size
< 1) &&
1026 (ioc
->Request
.Type
.Direction
!= XFER_NONE
)) {
1030 /* Check kmalloc limits using all SGs */
1031 if (ioc
->malloc_size
> MAX_KMALLOC_SIZE
) {
1035 if (ioc
->buf_size
> ioc
->malloc_size
* MAXSGENTRIES
) {
1040 kzalloc(MAXSGENTRIES
* sizeof(char *), GFP_KERNEL
);
1045 buff_size
= (int *)kmalloc(MAXSGENTRIES
* sizeof(int),
1051 left
= ioc
->buf_size
;
1052 data_ptr
= ioc
->buf
;
1055 ioc
->malloc_size
) ? ioc
->
1057 buff_size
[sg_used
] = sz
;
1058 buff
[sg_used
] = kmalloc(sz
, GFP_KERNEL
);
1059 if (buff
[sg_used
] == NULL
) {
1063 if (ioc
->Request
.Type
.Direction
== XFER_WRITE
) {
1065 (buff
[sg_used
], data_ptr
, sz
)) {
1070 memset(buff
[sg_used
], 0, sz
);
1076 if ((c
= cmd_alloc(host
, 0)) == NULL
) {
1080 c
->cmd_type
= CMD_IOCTL_PEND
;
1081 c
->Header
.ReplyQueue
= 0;
1083 if (ioc
->buf_size
> 0) {
1084 c
->Header
.SGList
= sg_used
;
1085 c
->Header
.SGTotal
= sg_used
;
1087 c
->Header
.SGList
= 0;
1088 c
->Header
.SGTotal
= 0;
1090 c
->Header
.LUN
= ioc
->LUN_info
;
1091 c
->Header
.Tag
.lower
= c
->busaddr
;
1093 c
->Request
= ioc
->Request
;
1094 if (ioc
->buf_size
> 0) {
1096 for (i
= 0; i
< sg_used
; i
++) {
1098 pci_map_single(host
->pdev
, buff
[i
],
1100 PCI_DMA_BIDIRECTIONAL
);
1101 c
->SG
[i
].Addr
.lower
=
1103 c
->SG
[i
].Addr
.upper
=
1105 c
->SG
[i
].Len
= buff_size
[i
];
1106 c
->SG
[i
].Ext
= 0; /* we are not chaining */
1110 /* Put the request on the tail of the request queue */
1111 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1112 addQ(&host
->reqQ
, c
);
1115 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1116 wait_for_completion(&wait
);
1117 /* unlock the buffers from DMA */
1118 for (i
= 0; i
< sg_used
; i
++) {
1119 temp64
.val32
.lower
= c
->SG
[i
].Addr
.lower
;
1120 temp64
.val32
.upper
= c
->SG
[i
].Addr
.upper
;
1121 pci_unmap_single(host
->pdev
,
1122 (dma_addr_t
) temp64
.val
, buff_size
[i
],
1123 PCI_DMA_BIDIRECTIONAL
);
1125 /* Copy the error information out */
1126 ioc
->error_info
= *(c
->err_info
);
1127 if (copy_to_user(argp
, ioc
, sizeof(*ioc
))) {
1128 cmd_free(host
, c
, 0);
1132 if (ioc
->Request
.Type
.Direction
== XFER_READ
) {
1133 /* Copy the data out of the buffer we created */
1134 BYTE __user
*ptr
= ioc
->buf
;
1135 for (i
= 0; i
< sg_used
; i
++) {
1137 (ptr
, buff
[i
], buff_size
[i
])) {
1138 cmd_free(host
, c
, 0);
1142 ptr
+= buff_size
[i
];
1145 cmd_free(host
, c
, 0);
1149 for (i
= 0; i
< sg_used
; i
++)
1163 * revalidate_allvol is for online array config utilities. After a
1164 * utility reconfigures the drives in the array, it can use this function
1165 * (through an ioctl) to make the driver zap any previous disk structs for
1166 * that controller and get new ones.
1168 * Right now I'm using the getgeometry() function to do this, but this
1169 * function should probably be finer grained and allow you to revalidate one
1170 * particular logical volume (instead of all of them on a particular
1173 static int revalidate_allvol(ctlr_info_t
*host
)
1175 int ctlr
= host
->ctlr
, i
;
1176 unsigned long flags
;
1178 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1179 if (host
->usage_count
> 1) {
1180 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1181 printk(KERN_WARNING
"cciss: Device busy for volume"
1182 " revalidation (usage=%d)\n", host
->usage_count
);
1185 host
->usage_count
++;
1186 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1188 for (i
= 0; i
< NWD
; i
++) {
1189 struct gendisk
*disk
= host
->gendisk
[i
];
1191 request_queue_t
*q
= disk
->queue
;
1193 if (disk
->flags
& GENHD_FL_UP
)
1196 blk_cleanup_queue(q
);
1201 * Set the partition and block size structures for all volumes
1202 * on this controller to zero. We will reread all of this data
1204 memset(host
->drv
, 0, sizeof(drive_info_struct
)
1207 * Tell the array controller not to give us any interrupts while
1208 * we check the new geometry. Then turn interrupts back on when
1211 host
->access
.set_intr_mask(host
, CCISS_INTR_OFF
);
1212 cciss_getgeometry(ctlr
);
1213 host
->access
.set_intr_mask(host
, CCISS_INTR_ON
);
1215 /* Loop through each real device */
1216 for (i
= 0; i
< NWD
; i
++) {
1217 struct gendisk
*disk
= host
->gendisk
[i
];
1218 drive_info_struct
*drv
= &(host
->drv
[i
]);
1219 /* we must register the controller even if no disks exist */
1220 /* this is for the online array utilities */
1221 if (!drv
->heads
&& i
)
1223 blk_queue_hardsect_size(drv
->queue
, drv
->block_size
);
1224 set_capacity(disk
, drv
->nr_blocks
);
1227 host
->usage_count
--;
1231 static inline void complete_buffers(struct bio
*bio
, int status
)
1234 struct bio
*xbh
= bio
->bi_next
;
1235 int nr_sectors
= bio_sectors(bio
);
1237 bio
->bi_next
= NULL
;
1238 bio_endio(bio
, nr_sectors
<< 9, status
? 0 : -EIO
);
1243 static void cciss_check_queues(ctlr_info_t
*h
)
1245 int start_queue
= h
->next_to_run
;
1248 /* check to see if we have maxed out the number of commands that can
1249 * be placed on the queue. If so then exit. We do this check here
1250 * in case the interrupt we serviced was from an ioctl and did not
1251 * free any new commands.
1253 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
)
1256 /* We have room on the queue for more commands. Now we need to queue
1257 * them up. We will also keep track of the next queue to run so
1258 * that every queue gets a chance to be started first.
1260 for (i
= 0; i
< h
->highest_lun
+ 1; i
++) {
1261 int curr_queue
= (start_queue
+ i
) % (h
->highest_lun
+ 1);
1262 /* make sure the disk has been added and the drive is real
1263 * because this can be called from the middle of init_one.
1265 if (!(h
->drv
[curr_queue
].queue
) || !(h
->drv
[curr_queue
].heads
))
1267 blk_start_queue(h
->gendisk
[curr_queue
]->queue
);
1269 /* check to see if we have maxed out the number of commands
1270 * that can be placed on the queue.
1272 if ((find_first_zero_bit(h
->cmd_pool_bits
, h
->nr_cmds
)) == h
->nr_cmds
) {
1273 if (curr_queue
== start_queue
) {
1275 (start_queue
+ 1) % (h
->highest_lun
+ 1);
1278 h
->next_to_run
= curr_queue
;
1282 curr_queue
= (curr_queue
+ 1) % (h
->highest_lun
+ 1);
1287 static void cciss_softirq_done(struct request
*rq
)
1289 CommandList_struct
*cmd
= rq
->completion_data
;
1290 ctlr_info_t
*h
= hba
[cmd
->ctlr
];
1291 unsigned long flags
;
1295 if (cmd
->Request
.Type
.Direction
== XFER_READ
)
1296 ddir
= PCI_DMA_FROMDEVICE
;
1298 ddir
= PCI_DMA_TODEVICE
;
1300 /* command did not need to be retried */
1301 /* unmap the DMA mapping for all the scatter gather elements */
1302 for (i
= 0; i
< cmd
->Header
.SGList
; i
++) {
1303 temp64
.val32
.lower
= cmd
->SG
[i
].Addr
.lower
;
1304 temp64
.val32
.upper
= cmd
->SG
[i
].Addr
.upper
;
1305 pci_unmap_page(h
->pdev
, temp64
.val
, cmd
->SG
[i
].Len
, ddir
);
1308 complete_buffers(rq
->bio
, rq
->errors
);
1310 if (blk_fs_request(rq
)) {
1311 const int rw
= rq_data_dir(rq
);
1313 disk_stat_add(rq
->rq_disk
, sectors
[rw
], rq
->nr_sectors
);
1317 printk("Done with %p\n", rq
);
1318 #endif /* CCISS_DEBUG */
1320 add_disk_randomness(rq
->rq_disk
);
1321 spin_lock_irqsave(&h
->lock
, flags
);
1322 end_that_request_last(rq
, rq
->errors
);
1323 cmd_free(h
, cmd
, 1);
1324 cciss_check_queues(h
);
1325 spin_unlock_irqrestore(&h
->lock
, flags
);
1328 /* This function will check the usage_count of the drive to be updated/added.
1329 * If the usage_count is zero then the drive information will be updated and
1330 * the disk will be re-registered with the kernel. If not then it will be
1331 * left alone for the next reboot. The exception to this is disk 0 which
1332 * will always be left registered with the kernel since it is also the
1333 * controller node. Any changes to disk 0 will show up on the next
1336 static void cciss_update_drive_info(int ctlr
, int drv_index
)
1338 ctlr_info_t
*h
= hba
[ctlr
];
1339 struct gendisk
*disk
;
1340 InquiryData_struct
*inq_buff
= NULL
;
1341 unsigned int block_size
;
1342 sector_t total_size
;
1343 unsigned long flags
= 0;
1346 /* if the disk already exists then deregister it before proceeding */
1347 if (h
->drv
[drv_index
].raid_level
!= -1) {
1348 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1349 h
->drv
[drv_index
].busy_configuring
= 1;
1350 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1351 ret
= deregister_disk(h
->gendisk
[drv_index
],
1352 &h
->drv
[drv_index
], 0);
1353 h
->drv
[drv_index
].busy_configuring
= 0;
1356 /* If the disk is in use return */
1360 /* Get information about the disk and modify the driver structure */
1361 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
1362 if (inq_buff
== NULL
)
1365 cciss_read_capacity(ctlr
, drv_index
, 1,
1366 &total_size
, &block_size
);
1368 /* total size = last LBA + 1 */
1369 /* FFFFFFFF + 1 = 0, cannot have a logical volume of size 0 */
1370 /* so we assume this volume this must be >2TB in size */
1371 if (total_size
== (__u32
) 0) {
1372 cciss_read_capacity_16(ctlr
, drv_index
, 1,
1373 &total_size
, &block_size
);
1374 h
->cciss_read
= CCISS_READ_16
;
1375 h
->cciss_write
= CCISS_WRITE_16
;
1377 h
->cciss_read
= CCISS_READ_10
;
1378 h
->cciss_write
= CCISS_WRITE_10
;
1380 cciss_geometry_inquiry(ctlr
, drv_index
, 1, total_size
, block_size
,
1381 inq_buff
, &h
->drv
[drv_index
]);
1384 disk
= h
->gendisk
[drv_index
];
1385 set_capacity(disk
, h
->drv
[drv_index
].nr_blocks
);
1387 /* if it's the controller it's already added */
1389 disk
->queue
= blk_init_queue(do_cciss_request
, &h
->lock
);
1391 /* Set up queue information */
1392 disk
->queue
->backing_dev_info
.ra_pages
= READ_AHEAD
;
1393 blk_queue_bounce_limit(disk
->queue
, hba
[ctlr
]->pdev
->dma_mask
);
1395 /* This is a hardware imposed limit. */
1396 blk_queue_max_hw_segments(disk
->queue
, MAXSGENTRIES
);
1398 /* This is a limit in the driver and could be eliminated. */
1399 blk_queue_max_phys_segments(disk
->queue
, MAXSGENTRIES
);
1401 blk_queue_max_sectors(disk
->queue
, h
->cciss_max_sectors
);
1403 blk_queue_softirq_done(disk
->queue
, cciss_softirq_done
);
1405 disk
->queue
->queuedata
= hba
[ctlr
];
1407 blk_queue_hardsect_size(disk
->queue
,
1408 hba
[ctlr
]->drv
[drv_index
].block_size
);
1410 h
->drv
[drv_index
].queue
= disk
->queue
;
1418 printk(KERN_ERR
"cciss: out of memory\n");
1422 /* This function will find the first index of the controllers drive array
1423 * that has a -1 for the raid_level and will return that index. This is
1424 * where new drives will be added. If the index to be returned is greater
1425 * than the highest_lun index for the controller then highest_lun is set
1426 * to this new index. If there are no available indexes then -1 is returned.
1428 static int cciss_find_free_drive_index(int ctlr
)
1432 for (i
= 0; i
< CISS_MAX_LUN
; i
++) {
1433 if (hba
[ctlr
]->drv
[i
].raid_level
== -1) {
1434 if (i
> hba
[ctlr
]->highest_lun
)
1435 hba
[ctlr
]->highest_lun
= i
;
1442 /* This function will add and remove logical drives from the Logical
1443 * drive array of the controller and maintain persistency of ordering
1444 * so that mount points are preserved until the next reboot. This allows
1445 * for the removal of logical drives in the middle of the drive array
1446 * without a re-ordering of those drives.
1448 * h = The controller to perform the operations on
1449 * del_disk = The disk to remove if specified. If the value given
1450 * is NULL then no disk is removed.
1452 static int rebuild_lun_table(ctlr_info_t
*h
, struct gendisk
*del_disk
)
1456 ReportLunData_struct
*ld_buff
= NULL
;
1457 drive_info_struct
*drv
= NULL
;
1464 unsigned long flags
;
1466 /* Set busy_configuring flag for this operation */
1467 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
1468 if (h
->num_luns
>= CISS_MAX_LUN
) {
1469 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1473 if (h
->busy_configuring
) {
1474 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1477 h
->busy_configuring
= 1;
1479 /* if del_disk is NULL then we are being called to add a new disk
1480 * and update the logical drive table. If it is not NULL then
1481 * we will check if the disk is in use or not.
1483 if (del_disk
!= NULL
) {
1484 drv
= get_drv(del_disk
);
1485 drv
->busy_configuring
= 1;
1486 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1487 return_code
= deregister_disk(del_disk
, drv
, 1);
1488 drv
->busy_configuring
= 0;
1489 h
->busy_configuring
= 0;
1492 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
1493 if (!capable(CAP_SYS_RAWIO
))
1496 ld_buff
= kzalloc(sizeof(ReportLunData_struct
), GFP_KERNEL
);
1497 if (ld_buff
== NULL
)
1500 return_code
= sendcmd_withirq(CISS_REPORT_LOG
, ctlr
, ld_buff
,
1501 sizeof(ReportLunData_struct
), 0,
1504 if (return_code
== IO_OK
) {
1506 (0xff & (unsigned int)(ld_buff
->LUNListLength
[0]))
1509 (0xff & (unsigned int)(ld_buff
->LUNListLength
[1]))
1512 (0xff & (unsigned int)(ld_buff
->LUNListLength
[2]))
1515 0xff & (unsigned int)(ld_buff
->LUNListLength
[3]);
1516 } else { /* reading number of logical volumes failed */
1517 printk(KERN_WARNING
"cciss: report logical volume"
1518 " command failed\n");
1523 num_luns
= listlength
/ 8; /* 8 bytes per entry */
1524 if (num_luns
> CISS_MAX_LUN
) {
1525 num_luns
= CISS_MAX_LUN
;
1526 printk(KERN_WARNING
"cciss: more luns configured"
1527 " on controller than can be handled by"
1531 /* Compare controller drive array to drivers drive array.
1532 * Check for updates in the drive information and any new drives
1533 * on the controller.
1535 for (i
= 0; i
< num_luns
; i
++) {
1541 (unsigned int)(ld_buff
->LUN
[i
][3])) << 24;
1543 (unsigned int)(ld_buff
->LUN
[i
][2])) << 16;
1545 (unsigned int)(ld_buff
->LUN
[i
][1])) << 8;
1546 lunid
|= 0xff & (unsigned int)(ld_buff
->LUN
[i
][0]);
1548 /* Find if the LUN is already in the drive array
1549 * of the controller. If so then update its info
1550 * if not is use. If it does not exist then find
1551 * the first free index and add it.
1553 for (j
= 0; j
<= h
->highest_lun
; j
++) {
1554 if (h
->drv
[j
].LunID
== lunid
) {
1560 /* check if the drive was found already in the array */
1562 drv_index
= cciss_find_free_drive_index(ctlr
);
1563 if (drv_index
== -1)
1567 h
->drv
[drv_index
].LunID
= lunid
;
1568 cciss_update_drive_info(ctlr
, drv_index
);
1574 h
->busy_configuring
= 0;
1575 /* We return -1 here to tell the ACU that we have registered/updated
1576 * all of the drives that we can and to keep it from calling us
1581 printk(KERN_ERR
"cciss: out of memory\n");
1585 /* This function will deregister the disk and it's queue from the
1586 * kernel. It must be called with the controller lock held and the
1587 * drv structures busy_configuring flag set. It's parameters are:
1589 * disk = This is the disk to be deregistered
1590 * drv = This is the drive_info_struct associated with the disk to be
1591 * deregistered. It contains information about the disk used
1593 * clear_all = This flag determines whether or not the disk information
1594 * is going to be completely cleared out and the highest_lun
1595 * reset. Sometimes we want to clear out information about
1596 * the disk in preparation for re-adding it. In this case
1597 * the highest_lun should be left unchanged and the LunID
1598 * should not be cleared.
1600 static int deregister_disk(struct gendisk
*disk
, drive_info_struct
*drv
,
1603 ctlr_info_t
*h
= get_host(disk
);
1605 if (!capable(CAP_SYS_RAWIO
))
1608 /* make sure logical volume is NOT is use */
1609 if (clear_all
|| (h
->gendisk
[0] == disk
)) {
1610 if (drv
->usage_count
> 1)
1612 } else if (drv
->usage_count
> 0)
1615 /* invalidate the devices and deregister the disk. If it is disk
1616 * zero do not deregister it but just zero out it's values. This
1617 * allows us to delete disk zero but keep the controller registered.
1619 if (h
->gendisk
[0] != disk
) {
1621 request_queue_t
*q
= disk
->queue
;
1622 if (disk
->flags
& GENHD_FL_UP
)
1625 blk_cleanup_queue(q
);
1632 /* zero out the disk size info */
1634 drv
->block_size
= 0;
1638 drv
->raid_level
= -1; /* This can be used as a flag variable to
1639 * indicate that this element of the drive
1644 /* check to see if it was the last disk */
1645 if (drv
== h
->drv
+ h
->highest_lun
) {
1646 /* if so, find the new hightest lun */
1647 int i
, newhighest
= -1;
1648 for (i
= 0; i
< h
->highest_lun
; i
++) {
1649 /* if the disk has size > 0, it is available */
1650 if (h
->drv
[i
].heads
)
1653 h
->highest_lun
= newhighest
;
1661 static int fill_cmd(CommandList_struct
*c
, __u8 cmd
, int ctlr
, void *buff
, size_t size
, unsigned int use_unit_num
, /* 0: address the controller,
1662 1: address logical volume log_unit,
1663 2: periph device address is scsi3addr */
1664 unsigned int log_unit
, __u8 page_code
,
1665 unsigned char *scsi3addr
, int cmd_type
)
1667 ctlr_info_t
*h
= hba
[ctlr
];
1668 u64bit buff_dma_handle
;
1671 c
->cmd_type
= CMD_IOCTL_PEND
;
1672 c
->Header
.ReplyQueue
= 0;
1674 c
->Header
.SGList
= 1;
1675 c
->Header
.SGTotal
= 1;
1677 c
->Header
.SGList
= 0;
1678 c
->Header
.SGTotal
= 0;
1680 c
->Header
.Tag
.lower
= c
->busaddr
;
1682 c
->Request
.Type
.Type
= cmd_type
;
1683 if (cmd_type
== TYPE_CMD
) {
1686 /* If the logical unit number is 0 then, this is going
1687 to controller so It's a physical command
1688 mode = 0 target = 0. So we have nothing to write.
1689 otherwise, if use_unit_num == 1,
1690 mode = 1(volume set addressing) target = LUNID
1691 otherwise, if use_unit_num == 2,
1692 mode = 0(periph dev addr) target = scsi3addr */
1693 if (use_unit_num
== 1) {
1694 c
->Header
.LUN
.LogDev
.VolId
=
1695 h
->drv
[log_unit
].LunID
;
1696 c
->Header
.LUN
.LogDev
.Mode
= 1;
1697 } else if (use_unit_num
== 2) {
1698 memcpy(c
->Header
.LUN
.LunAddrBytes
, scsi3addr
,
1700 c
->Header
.LUN
.LogDev
.Mode
= 0;
1702 /* are we trying to read a vital product page */
1703 if (page_code
!= 0) {
1704 c
->Request
.CDB
[1] = 0x01;
1705 c
->Request
.CDB
[2] = page_code
;
1707 c
->Request
.CDBLen
= 6;
1708 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1709 c
->Request
.Type
.Direction
= XFER_READ
;
1710 c
->Request
.Timeout
= 0;
1711 c
->Request
.CDB
[0] = CISS_INQUIRY
;
1712 c
->Request
.CDB
[4] = size
& 0xFF;
1714 case CISS_REPORT_LOG
:
1715 case CISS_REPORT_PHYS
:
1716 /* Talking to controller so It's a physical command
1717 mode = 00 target = 0. Nothing to write.
1719 c
->Request
.CDBLen
= 12;
1720 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1721 c
->Request
.Type
.Direction
= XFER_READ
;
1722 c
->Request
.Timeout
= 0;
1723 c
->Request
.CDB
[0] = cmd
;
1724 c
->Request
.CDB
[6] = (size
>> 24) & 0xFF; //MSB
1725 c
->Request
.CDB
[7] = (size
>> 16) & 0xFF;
1726 c
->Request
.CDB
[8] = (size
>> 8) & 0xFF;
1727 c
->Request
.CDB
[9] = size
& 0xFF;
1730 case CCISS_READ_CAPACITY
:
1731 c
->Header
.LUN
.LogDev
.VolId
= h
->drv
[log_unit
].LunID
;
1732 c
->Header
.LUN
.LogDev
.Mode
= 1;
1733 c
->Request
.CDBLen
= 10;
1734 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1735 c
->Request
.Type
.Direction
= XFER_READ
;
1736 c
->Request
.Timeout
= 0;
1737 c
->Request
.CDB
[0] = cmd
;
1739 case CCISS_READ_CAPACITY_16
:
1740 c
->Header
.LUN
.LogDev
.VolId
= h
->drv
[log_unit
].LunID
;
1741 c
->Header
.LUN
.LogDev
.Mode
= 1;
1742 c
->Request
.CDBLen
= 16;
1743 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1744 c
->Request
.Type
.Direction
= XFER_READ
;
1745 c
->Request
.Timeout
= 0;
1746 c
->Request
.CDB
[0] = cmd
;
1747 c
->Request
.CDB
[1] = 0x10;
1748 c
->Request
.CDB
[10] = (size
>> 24) & 0xFF;
1749 c
->Request
.CDB
[11] = (size
>> 16) & 0xFF;
1750 c
->Request
.CDB
[12] = (size
>> 8) & 0xFF;
1751 c
->Request
.CDB
[13] = size
& 0xFF;
1752 c
->Request
.Timeout
= 0;
1753 c
->Request
.CDB
[0] = cmd
;
1755 case CCISS_CACHE_FLUSH
:
1756 c
->Request
.CDBLen
= 12;
1757 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1758 c
->Request
.Type
.Direction
= XFER_WRITE
;
1759 c
->Request
.Timeout
= 0;
1760 c
->Request
.CDB
[0] = BMIC_WRITE
;
1761 c
->Request
.CDB
[6] = BMIC_CACHE_FLUSH
;
1765 "cciss%d: Unknown Command 0x%c\n", ctlr
, cmd
);
1768 } else if (cmd_type
== TYPE_MSG
) {
1770 case 0: /* ABORT message */
1771 c
->Request
.CDBLen
= 12;
1772 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1773 c
->Request
.Type
.Direction
= XFER_WRITE
;
1774 c
->Request
.Timeout
= 0;
1775 c
->Request
.CDB
[0] = cmd
; /* abort */
1776 c
->Request
.CDB
[1] = 0; /* abort a command */
1777 /* buff contains the tag of the command to abort */
1778 memcpy(&c
->Request
.CDB
[4], buff
, 8);
1780 case 1: /* RESET message */
1781 c
->Request
.CDBLen
= 12;
1782 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1783 c
->Request
.Type
.Direction
= XFER_WRITE
;
1784 c
->Request
.Timeout
= 0;
1785 memset(&c
->Request
.CDB
[0], 0, sizeof(c
->Request
.CDB
));
1786 c
->Request
.CDB
[0] = cmd
; /* reset */
1787 c
->Request
.CDB
[1] = 0x04; /* reset a LUN */
1789 case 3: /* No-Op message */
1790 c
->Request
.CDBLen
= 1;
1791 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
1792 c
->Request
.Type
.Direction
= XFER_WRITE
;
1793 c
->Request
.Timeout
= 0;
1794 c
->Request
.CDB
[0] = cmd
;
1798 "cciss%d: unknown message type %d\n", ctlr
, cmd
);
1803 "cciss%d: unknown command type %d\n", ctlr
, cmd_type
);
1806 /* Fill in the scatter gather information */
1808 buff_dma_handle
.val
= (__u64
) pci_map_single(h
->pdev
,
1810 PCI_DMA_BIDIRECTIONAL
);
1811 c
->SG
[0].Addr
.lower
= buff_dma_handle
.val32
.lower
;
1812 c
->SG
[0].Addr
.upper
= buff_dma_handle
.val32
.upper
;
1813 c
->SG
[0].Len
= size
;
1814 c
->SG
[0].Ext
= 0; /* we are not chaining */
1819 static int sendcmd_withirq(__u8 cmd
,
1823 unsigned int use_unit_num
,
1824 unsigned int log_unit
, __u8 page_code
, int cmd_type
)
1826 ctlr_info_t
*h
= hba
[ctlr
];
1827 CommandList_struct
*c
;
1828 u64bit buff_dma_handle
;
1829 unsigned long flags
;
1831 DECLARE_COMPLETION_ONSTACK(wait
);
1833 if ((c
= cmd_alloc(h
, 0)) == NULL
)
1835 return_status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, use_unit_num
,
1836 log_unit
, page_code
, NULL
, cmd_type
);
1837 if (return_status
!= IO_OK
) {
1839 return return_status
;
1844 /* Put the request on the tail of the queue and send it */
1845 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
1849 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
1851 wait_for_completion(&wait
);
1853 if (c
->err_info
->CommandStatus
!= 0) { /* an error has occurred */
1854 switch (c
->err_info
->CommandStatus
) {
1855 case CMD_TARGET_STATUS
:
1856 printk(KERN_WARNING
"cciss: cmd %p has "
1857 " completed with errors\n", c
);
1858 if (c
->err_info
->ScsiStatus
) {
1859 printk(KERN_WARNING
"cciss: cmd %p "
1860 "has SCSI Status = %x\n",
1861 c
, c
->err_info
->ScsiStatus
);
1865 case CMD_DATA_UNDERRUN
:
1866 case CMD_DATA_OVERRUN
:
1867 /* expected for inquire and report lun commands */
1870 printk(KERN_WARNING
"cciss: Cmd %p is "
1871 "reported invalid\n", c
);
1872 return_status
= IO_ERROR
;
1874 case CMD_PROTOCOL_ERR
:
1875 printk(KERN_WARNING
"cciss: cmd %p has "
1876 "protocol error \n", c
);
1877 return_status
= IO_ERROR
;
1879 case CMD_HARDWARE_ERR
:
1880 printk(KERN_WARNING
"cciss: cmd %p had "
1881 " hardware error\n", c
);
1882 return_status
= IO_ERROR
;
1884 case CMD_CONNECTION_LOST
:
1885 printk(KERN_WARNING
"cciss: cmd %p had "
1886 "connection lost\n", c
);
1887 return_status
= IO_ERROR
;
1890 printk(KERN_WARNING
"cciss: cmd %p was "
1892 return_status
= IO_ERROR
;
1894 case CMD_ABORT_FAILED
:
1895 printk(KERN_WARNING
"cciss: cmd %p reports "
1896 "abort failed\n", c
);
1897 return_status
= IO_ERROR
;
1899 case CMD_UNSOLICITED_ABORT
:
1901 "cciss%d: unsolicited abort %p\n", ctlr
, c
);
1902 if (c
->retry_count
< MAX_CMD_RETRIES
) {
1904 "cciss%d: retrying %p\n", ctlr
, c
);
1906 /* erase the old error information */
1907 memset(c
->err_info
, 0,
1908 sizeof(ErrorInfo_struct
));
1909 return_status
= IO_OK
;
1910 INIT_COMPLETION(wait
);
1913 return_status
= IO_ERROR
;
1916 printk(KERN_WARNING
"cciss: cmd %p returned "
1917 "unknown status %x\n", c
,
1918 c
->err_info
->CommandStatus
);
1919 return_status
= IO_ERROR
;
1922 /* unlock the buffers from DMA */
1923 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
1924 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
1925 pci_unmap_single(h
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
1926 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
1928 return return_status
;
1931 static void cciss_geometry_inquiry(int ctlr
, int logvol
,
1932 int withirq
, sector_t total_size
,
1933 unsigned int block_size
,
1934 InquiryData_struct
*inq_buff
,
1935 drive_info_struct
*drv
)
1940 memset(inq_buff
, 0, sizeof(InquiryData_struct
));
1942 return_code
= sendcmd_withirq(CISS_INQUIRY
, ctlr
,
1943 inq_buff
, sizeof(*inq_buff
), 1,
1944 logvol
, 0xC1, TYPE_CMD
);
1946 return_code
= sendcmd(CISS_INQUIRY
, ctlr
, inq_buff
,
1947 sizeof(*inq_buff
), 1, logvol
, 0xC1, NULL
,
1949 if (return_code
== IO_OK
) {
1950 if (inq_buff
->data_byte
[8] == 0xFF) {
1952 "cciss: reading geometry failed, volume "
1953 "does not support reading geometry\n");
1955 drv
->sectors
= 32; // Sectors per track
1957 drv
->heads
= inq_buff
->data_byte
[6];
1958 drv
->sectors
= inq_buff
->data_byte
[7];
1959 drv
->cylinders
= (inq_buff
->data_byte
[4] & 0xff) << 8;
1960 drv
->cylinders
+= inq_buff
->data_byte
[5];
1961 drv
->raid_level
= inq_buff
->data_byte
[8];
1963 drv
->block_size
= block_size
;
1964 drv
->nr_blocks
= total_size
;
1965 t
= drv
->heads
* drv
->sectors
;
1967 unsigned rem
= sector_div(total_size
, t
);
1970 drv
->cylinders
= total_size
;
1972 } else { /* Get geometry failed */
1973 printk(KERN_WARNING
"cciss: reading geometry failed\n");
1975 printk(KERN_INFO
" heads=%d, sectors=%d, cylinders=%d\n\n",
1976 drv
->heads
, drv
->sectors
, drv
->cylinders
);
1980 cciss_read_capacity(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
,
1981 unsigned int *block_size
)
1983 ReadCapdata_struct
*buf
;
1985 buf
= kmalloc(sizeof(ReadCapdata_struct
), GFP_KERNEL
);
1987 printk(KERN_WARNING
"cciss: out of memory\n");
1990 memset(buf
, 0, sizeof(ReadCapdata_struct
));
1992 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY
,
1993 ctlr
, buf
, sizeof(ReadCapdata_struct
),
1994 1, logvol
, 0, TYPE_CMD
);
1996 return_code
= sendcmd(CCISS_READ_CAPACITY
,
1997 ctlr
, buf
, sizeof(ReadCapdata_struct
),
1998 1, logvol
, 0, NULL
, TYPE_CMD
);
1999 if (return_code
== IO_OK
) {
2000 *total_size
= be32_to_cpu(*(__u32
*) buf
->total_size
)+1;
2001 *block_size
= be32_to_cpu(*(__u32
*) buf
->block_size
);
2002 } else { /* read capacity command failed */
2003 printk(KERN_WARNING
"cciss: read capacity failed\n");
2005 *block_size
= BLOCK_SIZE
;
2007 if (*total_size
!= (__u32
) 0)
2008 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2009 (unsigned long long)*total_size
, *block_size
);
2015 cciss_read_capacity_16(int ctlr
, int logvol
, int withirq
, sector_t
*total_size
, unsigned int *block_size
)
2017 ReadCapdata_struct_16
*buf
;
2019 buf
= kmalloc(sizeof(ReadCapdata_struct_16
), GFP_KERNEL
);
2021 printk(KERN_WARNING
"cciss: out of memory\n");
2024 memset(buf
, 0, sizeof(ReadCapdata_struct_16
));
2026 return_code
= sendcmd_withirq(CCISS_READ_CAPACITY_16
,
2027 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2028 1, logvol
, 0, TYPE_CMD
);
2031 return_code
= sendcmd(CCISS_READ_CAPACITY_16
,
2032 ctlr
, buf
, sizeof(ReadCapdata_struct_16
),
2033 1, logvol
, 0, NULL
, TYPE_CMD
);
2035 if (return_code
== IO_OK
) {
2036 *total_size
= be64_to_cpu(*(__u64
*) buf
->total_size
)+1;
2037 *block_size
= be32_to_cpu(*(__u32
*) buf
->block_size
);
2038 } else { /* read capacity command failed */
2039 printk(KERN_WARNING
"cciss: read capacity failed\n");
2041 *block_size
= BLOCK_SIZE
;
2043 printk(KERN_INFO
" blocks= %llu block_size= %d\n",
2044 (unsigned long long)*total_size
, *block_size
);
2049 static int cciss_revalidate(struct gendisk
*disk
)
2051 ctlr_info_t
*h
= get_host(disk
);
2052 drive_info_struct
*drv
= get_drv(disk
);
2055 unsigned int block_size
;
2056 sector_t total_size
;
2057 InquiryData_struct
*inq_buff
= NULL
;
2059 for (logvol
= 0; logvol
< CISS_MAX_LUN
; logvol
++) {
2060 if (h
->drv
[logvol
].LunID
== drv
->LunID
) {
2069 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
2070 if (inq_buff
== NULL
) {
2071 printk(KERN_WARNING
"cciss: out of memory\n");
2074 if (h
->cciss_read
== CCISS_READ_10
) {
2075 cciss_read_capacity(h
->ctlr
, logvol
, 1,
2076 &total_size
, &block_size
);
2078 cciss_read_capacity_16(h
->ctlr
, logvol
, 1,
2079 &total_size
, &block_size
);
2081 cciss_geometry_inquiry(h
->ctlr
, logvol
, 1, total_size
, block_size
,
2084 blk_queue_hardsect_size(drv
->queue
, drv
->block_size
);
2085 set_capacity(disk
, drv
->nr_blocks
);
2092 * Wait polling for a command to complete.
2093 * The memory mapped FIFO is polled for the completion.
2094 * Used only at init time, interrupts from the HBA are disabled.
2096 static unsigned long pollcomplete(int ctlr
)
2101 /* Wait (up to 20 seconds) for a command to complete */
2103 for (i
= 20 * HZ
; i
> 0; i
--) {
2104 done
= hba
[ctlr
]->access
.command_completed(hba
[ctlr
]);
2105 if (done
== FIFO_EMPTY
)
2106 schedule_timeout_uninterruptible(1);
2110 /* Invalid address to tell caller we ran out of time */
2114 static int add_sendcmd_reject(__u8 cmd
, int ctlr
, unsigned long complete
)
2116 /* We get in here if sendcmd() is polling for completions
2117 and gets some command back that it wasn't expecting --
2118 something other than that which it just sent down.
2119 Ordinarily, that shouldn't happen, but it can happen when
2120 the scsi tape stuff gets into error handling mode, and
2121 starts using sendcmd() to try to abort commands and
2122 reset tape drives. In that case, sendcmd may pick up
2123 completions of commands that were sent to logical drives
2124 through the block i/o system, or cciss ioctls completing, etc.
2125 In that case, we need to save those completions for later
2126 processing by the interrupt handler.
2129 #ifdef CONFIG_CISS_SCSI_TAPE
2130 struct sendcmd_reject_list
*srl
= &hba
[ctlr
]->scsi_rejects
;
2132 /* If it's not the scsi tape stuff doing error handling, (abort */
2133 /* or reset) then we don't expect anything weird. */
2134 if (cmd
!= CCISS_RESET_MSG
&& cmd
!= CCISS_ABORT_MSG
) {
2136 printk(KERN_WARNING
"cciss cciss%d: SendCmd "
2137 "Invalid command list address returned! (%lx)\n",
2139 /* not much we can do. */
2140 #ifdef CONFIG_CISS_SCSI_TAPE
2144 /* We've sent down an abort or reset, but something else
2146 if (srl
->ncompletions
>= (hba
[ctlr
]->nr_cmds
+ 2)) {
2147 /* Uh oh. No room to save it for later... */
2148 printk(KERN_WARNING
"cciss%d: Sendcmd: Invalid command addr, "
2149 "reject list overflow, command lost!\n", ctlr
);
2152 /* Save it for later */
2153 srl
->complete
[srl
->ncompletions
] = complete
;
2154 srl
->ncompletions
++;
2160 * Send a command to the controller, and wait for it to complete.
2161 * Only used at init time.
2163 static int sendcmd(__u8 cmd
, int ctlr
, void *buff
, size_t size
, unsigned int use_unit_num
, /* 0: address the controller,
2164 1: address logical volume log_unit,
2165 2: periph device address is scsi3addr */
2166 unsigned int log_unit
,
2167 __u8 page_code
, unsigned char *scsi3addr
, int cmd_type
)
2169 CommandList_struct
*c
;
2171 unsigned long complete
;
2172 ctlr_info_t
*info_p
= hba
[ctlr
];
2173 u64bit buff_dma_handle
;
2174 int status
, done
= 0;
2176 if ((c
= cmd_alloc(info_p
, 1)) == NULL
) {
2177 printk(KERN_WARNING
"cciss: unable to get memory");
2180 status
= fill_cmd(c
, cmd
, ctlr
, buff
, size
, use_unit_num
,
2181 log_unit
, page_code
, scsi3addr
, cmd_type
);
2182 if (status
!= IO_OK
) {
2183 cmd_free(info_p
, c
, 1);
2191 printk(KERN_DEBUG
"cciss: turning intr off\n");
2192 #endif /* CCISS_DEBUG */
2193 info_p
->access
.set_intr_mask(info_p
, CCISS_INTR_OFF
);
2195 /* Make sure there is room in the command FIFO */
2196 /* Actually it should be completely empty at this time */
2197 /* unless we are in here doing error handling for the scsi */
2198 /* tape side of the driver. */
2199 for (i
= 200000; i
> 0; i
--) {
2200 /* if fifo isn't full go */
2201 if (!(info_p
->access
.fifo_full(info_p
))) {
2206 printk(KERN_WARNING
"cciss cciss%d: SendCmd FIFO full,"
2207 " waiting!\n", ctlr
);
2212 info_p
->access
.submit_command(info_p
, c
);
2215 complete
= pollcomplete(ctlr
);
2218 printk(KERN_DEBUG
"cciss: command completed\n");
2219 #endif /* CCISS_DEBUG */
2221 if (complete
== 1) {
2223 "cciss cciss%d: SendCmd Timeout out, "
2224 "No command list address returned!\n", ctlr
);
2230 /* This will need to change for direct lookup completions */
2231 if ((complete
& CISS_ERROR_BIT
)
2232 && (complete
& ~CISS_ERROR_BIT
) == c
->busaddr
) {
2233 /* if data overrun or underun on Report command
2236 if (((c
->Request
.CDB
[0] == CISS_REPORT_LOG
) ||
2237 (c
->Request
.CDB
[0] == CISS_REPORT_PHYS
) ||
2238 (c
->Request
.CDB
[0] == CISS_INQUIRY
)) &&
2239 ((c
->err_info
->CommandStatus
==
2240 CMD_DATA_OVERRUN
) ||
2241 (c
->err_info
->CommandStatus
== CMD_DATA_UNDERRUN
)
2243 complete
= c
->busaddr
;
2245 if (c
->err_info
->CommandStatus
==
2246 CMD_UNSOLICITED_ABORT
) {
2247 printk(KERN_WARNING
"cciss%d: "
2248 "unsolicited abort %p\n",
2250 if (c
->retry_count
< MAX_CMD_RETRIES
) {
2252 "cciss%d: retrying %p\n",
2255 /* erase the old error */
2257 memset(c
->err_info
, 0,
2259 (ErrorInfo_struct
));
2263 "cciss%d: retried %p too "
2264 "many times\n", ctlr
, c
);
2268 } else if (c
->err_info
->CommandStatus
==
2271 "cciss%d: command could not be aborted.\n",
2276 printk(KERN_WARNING
"ciss ciss%d: sendcmd"
2277 " Error %x \n", ctlr
,
2278 c
->err_info
->CommandStatus
);
2279 printk(KERN_WARNING
"ciss ciss%d: sendcmd"
2281 " size %x\n num %x value %x\n",
2283 c
->err_info
->MoreErrInfo
.Invalid_Cmd
.
2285 c
->err_info
->MoreErrInfo
.Invalid_Cmd
.
2287 c
->err_info
->MoreErrInfo
.Invalid_Cmd
.
2293 /* This will need changing for direct lookup completions */
2294 if (complete
!= c
->busaddr
) {
2295 if (add_sendcmd_reject(cmd
, ctlr
, complete
) != 0) {
2296 BUG(); /* we are pretty much hosed if we get here. */
2304 /* unlock the data buffer from DMA */
2305 buff_dma_handle
.val32
.lower
= c
->SG
[0].Addr
.lower
;
2306 buff_dma_handle
.val32
.upper
= c
->SG
[0].Addr
.upper
;
2307 pci_unmap_single(info_p
->pdev
, (dma_addr_t
) buff_dma_handle
.val
,
2308 c
->SG
[0].Len
, PCI_DMA_BIDIRECTIONAL
);
2309 #ifdef CONFIG_CISS_SCSI_TAPE
2310 /* if we saved some commands for later, process them now. */
2311 if (info_p
->scsi_rejects
.ncompletions
> 0)
2312 do_cciss_intr(0, info_p
);
2314 cmd_free(info_p
, c
, 1);
2319 * Map (physical) PCI mem into (virtual) kernel space
2321 static void __iomem
*remap_pci_mem(ulong base
, ulong size
)
2323 ulong page_base
= ((ulong
) base
) & PAGE_MASK
;
2324 ulong page_offs
= ((ulong
) base
) - page_base
;
2325 void __iomem
*page_remapped
= ioremap(page_base
, page_offs
+ size
);
2327 return page_remapped
? (page_remapped
+ page_offs
) : NULL
;
2331 * Takes jobs of the Q and sends them to the hardware, then puts it on
2332 * the Q to wait for completion.
2334 static void start_io(ctlr_info_t
*h
)
2336 CommandList_struct
*c
;
2338 while ((c
= h
->reqQ
) != NULL
) {
2339 /* can't do anything if fifo is full */
2340 if ((h
->access
.fifo_full(h
))) {
2341 printk(KERN_WARNING
"cciss: fifo full\n");
2345 /* Get the first entry from the Request Q */
2346 removeQ(&(h
->reqQ
), c
);
2349 /* Tell the controller execute command */
2350 h
->access
.submit_command(h
, c
);
2352 /* Put job onto the completed Q */
2353 addQ(&(h
->cmpQ
), c
);
2357 /* Assumes that CCISS_LOCK(h->ctlr) is held. */
2358 /* Zeros out the error record and then resends the command back */
2359 /* to the controller */
2360 static inline void resend_cciss_cmd(ctlr_info_t
*h
, CommandList_struct
*c
)
2362 /* erase the old error information */
2363 memset(c
->err_info
, 0, sizeof(ErrorInfo_struct
));
2365 /* add it to software queue and then send it to the controller */
2366 addQ(&(h
->reqQ
), c
);
2368 if (h
->Qdepth
> h
->maxQsinceinit
)
2369 h
->maxQsinceinit
= h
->Qdepth
;
2374 /* checks the status of the job and calls complete buffers to mark all
2375 * buffers for the completed job. Note that this function does not need
2376 * to hold the hba/queue lock.
2378 static inline void complete_command(ctlr_info_t
*h
, CommandList_struct
*cmd
,
2387 if (cmd
->err_info
->CommandStatus
!= 0) { /* an error has occurred */
2388 switch (cmd
->err_info
->CommandStatus
) {
2389 unsigned char sense_key
;
2390 case CMD_TARGET_STATUS
:
2393 if (cmd
->err_info
->ScsiStatus
== 0x02) {
2394 printk(KERN_WARNING
"cciss: cmd %p "
2395 "has CHECK CONDITION "
2396 " byte 2 = 0x%x\n", cmd
,
2397 cmd
->err_info
->SenseInfo
[2]
2399 /* check the sense key */
2400 sense_key
= 0xf & cmd
->err_info
->SenseInfo
[2];
2401 /* no status or recovered error */
2402 if ((sense_key
== 0x0) || (sense_key
== 0x1)) {
2406 printk(KERN_WARNING
"cciss: cmd %p "
2407 "has SCSI Status 0x%x\n",
2408 cmd
, cmd
->err_info
->ScsiStatus
);
2411 case CMD_DATA_UNDERRUN
:
2412 printk(KERN_WARNING
"cciss: cmd %p has"
2413 " completed with data underrun "
2416 case CMD_DATA_OVERRUN
:
2417 printk(KERN_WARNING
"cciss: cmd %p has"
2418 " completed with data overrun "
2422 printk(KERN_WARNING
"cciss: cmd %p is "
2423 "reported invalid\n", cmd
);
2426 case CMD_PROTOCOL_ERR
:
2427 printk(KERN_WARNING
"cciss: cmd %p has "
2428 "protocol error \n", cmd
);
2431 case CMD_HARDWARE_ERR
:
2432 printk(KERN_WARNING
"cciss: cmd %p had "
2433 " hardware error\n", cmd
);
2436 case CMD_CONNECTION_LOST
:
2437 printk(KERN_WARNING
"cciss: cmd %p had "
2438 "connection lost\n", cmd
);
2442 printk(KERN_WARNING
"cciss: cmd %p was "
2446 case CMD_ABORT_FAILED
:
2447 printk(KERN_WARNING
"cciss: cmd %p reports "
2448 "abort failed\n", cmd
);
2451 case CMD_UNSOLICITED_ABORT
:
2452 printk(KERN_WARNING
"cciss%d: unsolicited "
2453 "abort %p\n", h
->ctlr
, cmd
);
2454 if (cmd
->retry_count
< MAX_CMD_RETRIES
) {
2457 "cciss%d: retrying %p\n", h
->ctlr
, cmd
);
2461 "cciss%d: %p retried too "
2462 "many times\n", h
->ctlr
, cmd
);
2466 printk(KERN_WARNING
"cciss: cmd %p timedout\n", cmd
);
2470 printk(KERN_WARNING
"cciss: cmd %p returned "
2471 "unknown status %x\n", cmd
,
2472 cmd
->err_info
->CommandStatus
);
2476 /* We need to return this command */
2478 resend_cciss_cmd(h
, cmd
);
2482 cmd
->rq
->completion_data
= cmd
;
2483 cmd
->rq
->errors
= status
;
2484 blk_add_trace_rq(cmd
->rq
->q
, cmd
->rq
, BLK_TA_COMPLETE
);
2485 blk_complete_request(cmd
->rq
);
2489 * Get a request and submit it to the controller.
2491 static void do_cciss_request(request_queue_t
*q
)
2493 ctlr_info_t
*h
= q
->queuedata
;
2494 CommandList_struct
*c
;
2497 struct request
*creq
;
2499 struct scatterlist tmp_sg
[MAXSGENTRIES
];
2500 drive_info_struct
*drv
;
2503 /* We call start_io here in case there is a command waiting on the
2504 * queue that has not been sent.
2506 if (blk_queue_plugged(q
))
2510 creq
= elv_next_request(q
);
2514 BUG_ON(creq
->nr_phys_segments
> MAXSGENTRIES
);
2516 if ((c
= cmd_alloc(h
, 1)) == NULL
)
2519 blkdev_dequeue_request(creq
);
2521 spin_unlock_irq(q
->queue_lock
);
2523 c
->cmd_type
= CMD_RWREQ
;
2526 /* fill in the request */
2527 drv
= creq
->rq_disk
->private_data
;
2528 c
->Header
.ReplyQueue
= 0; // unused in simple mode
2529 /* got command from pool, so use the command block index instead */
2530 /* for direct lookups. */
2531 /* The first 2 bits are reserved for controller error reporting. */
2532 c
->Header
.Tag
.lower
= (c
->cmdindex
<< 3);
2533 c
->Header
.Tag
.lower
|= 0x04; /* flag for direct lookup. */
2534 c
->Header
.LUN
.LogDev
.VolId
= drv
->LunID
;
2535 c
->Header
.LUN
.LogDev
.Mode
= 1;
2536 c
->Request
.CDBLen
= 10; // 12 byte commands not in FW yet;
2537 c
->Request
.Type
.Type
= TYPE_CMD
; // It is a command.
2538 c
->Request
.Type
.Attribute
= ATTR_SIMPLE
;
2539 c
->Request
.Type
.Direction
=
2540 (rq_data_dir(creq
) == READ
) ? h
->cciss_read
: h
->cciss_write
;
2541 c
->Request
.Timeout
= 0; // Don't time out
2543 (rq_data_dir(creq
) == READ
) ? h
->cciss_read
: h
->cciss_write
;
2544 start_blk
= creq
->sector
;
2546 printk(KERN_DEBUG
"ciss: sector =%d nr_sectors=%d\n", (int)creq
->sector
,
2547 (int)creq
->nr_sectors
);
2548 #endif /* CCISS_DEBUG */
2550 seg
= blk_rq_map_sg(q
, creq
, tmp_sg
);
2552 /* get the DMA records for the setup */
2553 if (c
->Request
.Type
.Direction
== XFER_READ
)
2554 dir
= PCI_DMA_FROMDEVICE
;
2556 dir
= PCI_DMA_TODEVICE
;
2558 for (i
= 0; i
< seg
; i
++) {
2559 c
->SG
[i
].Len
= tmp_sg
[i
].length
;
2560 temp64
.val
= (__u64
) pci_map_page(h
->pdev
, tmp_sg
[i
].page
,
2562 tmp_sg
[i
].length
, dir
);
2563 c
->SG
[i
].Addr
.lower
= temp64
.val32
.lower
;
2564 c
->SG
[i
].Addr
.upper
= temp64
.val32
.upper
;
2565 c
->SG
[i
].Ext
= 0; // we are not chaining
2567 /* track how many SG entries we are using */
2572 printk(KERN_DEBUG
"cciss: Submitting %d sectors in %d segments\n",
2573 creq
->nr_sectors
, seg
);
2574 #endif /* CCISS_DEBUG */
2576 c
->Header
.SGList
= c
->Header
.SGTotal
= seg
;
2577 if(h
->cciss_read
== CCISS_READ_10
) {
2578 c
->Request
.CDB
[1] = 0;
2579 c
->Request
.CDB
[2] = (start_blk
>> 24) & 0xff; //MSB
2580 c
->Request
.CDB
[3] = (start_blk
>> 16) & 0xff;
2581 c
->Request
.CDB
[4] = (start_blk
>> 8) & 0xff;
2582 c
->Request
.CDB
[5] = start_blk
& 0xff;
2583 c
->Request
.CDB
[6] = 0; // (sect >> 24) & 0xff; MSB
2584 c
->Request
.CDB
[7] = (creq
->nr_sectors
>> 8) & 0xff;
2585 c
->Request
.CDB
[8] = creq
->nr_sectors
& 0xff;
2586 c
->Request
.CDB
[9] = c
->Request
.CDB
[11] = c
->Request
.CDB
[12] = 0;
2588 c
->Request
.CDBLen
= 16;
2589 c
->Request
.CDB
[1]= 0;
2590 c
->Request
.CDB
[2]= (start_blk
>> 56) & 0xff; //MSB
2591 c
->Request
.CDB
[3]= (start_blk
>> 48) & 0xff;
2592 c
->Request
.CDB
[4]= (start_blk
>> 40) & 0xff;
2593 c
->Request
.CDB
[5]= (start_blk
>> 32) & 0xff;
2594 c
->Request
.CDB
[6]= (start_blk
>> 24) & 0xff;
2595 c
->Request
.CDB
[7]= (start_blk
>> 16) & 0xff;
2596 c
->Request
.CDB
[8]= (start_blk
>> 8) & 0xff;
2597 c
->Request
.CDB
[9]= start_blk
& 0xff;
2598 c
->Request
.CDB
[10]= (creq
->nr_sectors
>> 24) & 0xff;
2599 c
->Request
.CDB
[11]= (creq
->nr_sectors
>> 16) & 0xff;
2600 c
->Request
.CDB
[12]= (creq
->nr_sectors
>> 8) & 0xff;
2601 c
->Request
.CDB
[13]= creq
->nr_sectors
& 0xff;
2602 c
->Request
.CDB
[14] = c
->Request
.CDB
[15] = 0;
2605 spin_lock_irq(q
->queue_lock
);
2607 addQ(&(h
->reqQ
), c
);
2609 if (h
->Qdepth
> h
->maxQsinceinit
)
2610 h
->maxQsinceinit
= h
->Qdepth
;
2616 /* We will already have the driver lock here so not need
2622 static inline unsigned long get_next_completion(ctlr_info_t
*h
)
2624 #ifdef CONFIG_CISS_SCSI_TAPE
2625 /* Any rejects from sendcmd() lying around? Process them first */
2626 if (h
->scsi_rejects
.ncompletions
== 0)
2627 return h
->access
.command_completed(h
);
2629 struct sendcmd_reject_list
*srl
;
2631 srl
= &h
->scsi_rejects
;
2632 n
= --srl
->ncompletions
;
2633 /* printk("cciss%d: processing saved reject\n", h->ctlr); */
2635 return srl
->complete
[n
];
2638 return h
->access
.command_completed(h
);
2642 static inline int interrupt_pending(ctlr_info_t
*h
)
2644 #ifdef CONFIG_CISS_SCSI_TAPE
2645 return (h
->access
.intr_pending(h
)
2646 || (h
->scsi_rejects
.ncompletions
> 0));
2648 return h
->access
.intr_pending(h
);
2652 static inline long interrupt_not_for_us(ctlr_info_t
*h
)
2654 #ifdef CONFIG_CISS_SCSI_TAPE
2655 return (((h
->access
.intr_pending(h
) == 0) ||
2656 (h
->interrupts_enabled
== 0))
2657 && (h
->scsi_rejects
.ncompletions
== 0));
2659 return (((h
->access
.intr_pending(h
) == 0) ||
2660 (h
->interrupts_enabled
== 0)));
2664 static irqreturn_t
do_cciss_intr(int irq
, void *dev_id
)
2666 ctlr_info_t
*h
= dev_id
;
2667 CommandList_struct
*c
;
2668 unsigned long flags
;
2671 if (interrupt_not_for_us(h
))
2674 * If there are completed commands in the completion queue,
2675 * we had better do something about it.
2677 spin_lock_irqsave(CCISS_LOCK(h
->ctlr
), flags
);
2678 while (interrupt_pending(h
)) {
2679 while ((a
= get_next_completion(h
)) != FIFO_EMPTY
) {
2683 if (a2
>= h
->nr_cmds
) {
2685 "cciss: controller cciss%d failed, stopping.\n",
2687 fail_all_cmds(h
->ctlr
);
2691 c
= h
->cmd_pool
+ a2
;
2696 if ((c
= h
->cmpQ
) == NULL
) {
2698 "cciss: Completion of %08x ignored\n",
2702 while (c
->busaddr
!= a
) {
2709 * If we've found the command, take it off the
2710 * completion Q and free it
2712 if (c
->busaddr
== a
) {
2713 removeQ(&h
->cmpQ
, c
);
2714 if (c
->cmd_type
== CMD_RWREQ
) {
2715 complete_command(h
, c
, 0);
2716 } else if (c
->cmd_type
== CMD_IOCTL_PEND
) {
2717 complete(c
->waiting
);
2719 # ifdef CONFIG_CISS_SCSI_TAPE
2720 else if (c
->cmd_type
== CMD_SCSI
)
2721 complete_scsi_command(c
, 0, a1
);
2728 spin_unlock_irqrestore(CCISS_LOCK(h
->ctlr
), flags
);
2733 * We cannot read the structure directly, for portability we must use
2735 * This is for debug only.
2738 static void print_cfg_table(CfgTable_struct
*tb
)
2743 printk("Controller Configuration information\n");
2744 printk("------------------------------------\n");
2745 for (i
= 0; i
< 4; i
++)
2746 temp_name
[i
] = readb(&(tb
->Signature
[i
]));
2747 temp_name
[4] = '\0';
2748 printk(" Signature = %s\n", temp_name
);
2749 printk(" Spec Number = %d\n", readl(&(tb
->SpecValence
)));
2750 printk(" Transport methods supported = 0x%x\n",
2751 readl(&(tb
->TransportSupport
)));
2752 printk(" Transport methods active = 0x%x\n",
2753 readl(&(tb
->TransportActive
)));
2754 printk(" Requested transport Method = 0x%x\n",
2755 readl(&(tb
->HostWrite
.TransportRequest
)));
2756 printk(" Coalesce Interrupt Delay = 0x%x\n",
2757 readl(&(tb
->HostWrite
.CoalIntDelay
)));
2758 printk(" Coalesce Interrupt Count = 0x%x\n",
2759 readl(&(tb
->HostWrite
.CoalIntCount
)));
2760 printk(" Max outstanding commands = 0x%d\n",
2761 readl(&(tb
->CmdsOutMax
)));
2762 printk(" Bus Types = 0x%x\n", readl(&(tb
->BusTypes
)));
2763 for (i
= 0; i
< 16; i
++)
2764 temp_name
[i
] = readb(&(tb
->ServerName
[i
]));
2765 temp_name
[16] = '\0';
2766 printk(" Server Name = %s\n", temp_name
);
2767 printk(" Heartbeat Counter = 0x%x\n\n\n", readl(&(tb
->HeartBeat
)));
2769 #endif /* CCISS_DEBUG */
2771 static int find_PCI_BAR_index(struct pci_dev
*pdev
, unsigned long pci_bar_addr
)
2773 int i
, offset
, mem_type
, bar_type
;
2774 if (pci_bar_addr
== PCI_BASE_ADDRESS_0
) /* looking for BAR zero? */
2777 for (i
= 0; i
< DEVICE_COUNT_RESOURCE
; i
++) {
2778 bar_type
= pci_resource_flags(pdev
, i
) & PCI_BASE_ADDRESS_SPACE
;
2779 if (bar_type
== PCI_BASE_ADDRESS_SPACE_IO
)
2782 mem_type
= pci_resource_flags(pdev
, i
) &
2783 PCI_BASE_ADDRESS_MEM_TYPE_MASK
;
2785 case PCI_BASE_ADDRESS_MEM_TYPE_32
:
2786 case PCI_BASE_ADDRESS_MEM_TYPE_1M
:
2787 offset
+= 4; /* 32 bit */
2789 case PCI_BASE_ADDRESS_MEM_TYPE_64
:
2792 default: /* reserved in PCI 2.2 */
2794 "Base address is invalid\n");
2799 if (offset
== pci_bar_addr
- PCI_BASE_ADDRESS_0
)
2805 /* If MSI/MSI-X is supported by the kernel we will try to enable it on
2806 * controllers that are capable. If not, we use IO-APIC mode.
2809 static void __devinit
cciss_interrupt_mode(ctlr_info_t
*c
,
2810 struct pci_dev
*pdev
, __u32 board_id
)
2812 #ifdef CONFIG_PCI_MSI
2814 struct msix_entry cciss_msix_entries
[4] = { {0, 0}, {0, 1},
2818 /* Some boards advertise MSI but don't really support it */
2819 if ((board_id
== 0x40700E11) ||
2820 (board_id
== 0x40800E11) ||
2821 (board_id
== 0x40820E11) || (board_id
== 0x40830E11))
2822 goto default_int_mode
;
2824 if (pci_find_capability(pdev
, PCI_CAP_ID_MSIX
)) {
2825 err
= pci_enable_msix(pdev
, cciss_msix_entries
, 4);
2827 c
->intr
[0] = cciss_msix_entries
[0].vector
;
2828 c
->intr
[1] = cciss_msix_entries
[1].vector
;
2829 c
->intr
[2] = cciss_msix_entries
[2].vector
;
2830 c
->intr
[3] = cciss_msix_entries
[3].vector
;
2835 printk(KERN_WARNING
"cciss: only %d MSI-X vectors "
2836 "available\n", err
);
2838 printk(KERN_WARNING
"cciss: MSI-X init failed %d\n",
2842 if (pci_find_capability(pdev
, PCI_CAP_ID_MSI
)) {
2843 if (!pci_enable_msi(pdev
)) {
2844 c
->intr
[SIMPLE_MODE_INT
] = pdev
->irq
;
2848 printk(KERN_WARNING
"cciss: MSI init failed\n");
2849 c
->intr
[SIMPLE_MODE_INT
] = pdev
->irq
;
2854 #endif /* CONFIG_PCI_MSI */
2855 /* if we get here we're going to use the default interrupt mode */
2856 c
->intr
[SIMPLE_MODE_INT
] = pdev
->irq
;
2860 static int cciss_pci_init(ctlr_info_t
*c
, struct pci_dev
*pdev
)
2862 ushort subsystem_vendor_id
, subsystem_device_id
, command
;
2863 __u32 board_id
, scratchpad
= 0;
2865 __u32 cfg_base_addr
;
2866 __u64 cfg_base_addr_index
;
2869 /* check to see if controller has been disabled */
2870 /* BEFORE trying to enable it */
2871 (void)pci_read_config_word(pdev
, PCI_COMMAND
, &command
);
2872 if (!(command
& 0x02)) {
2874 "cciss: controller appears to be disabled\n");
2878 err
= pci_enable_device(pdev
);
2880 printk(KERN_ERR
"cciss: Unable to Enable PCI device\n");
2884 err
= pci_request_regions(pdev
, "cciss");
2886 printk(KERN_ERR
"cciss: Cannot obtain PCI resources, "
2888 goto err_out_disable_pdev
;
2891 subsystem_vendor_id
= pdev
->subsystem_vendor
;
2892 subsystem_device_id
= pdev
->subsystem_device
;
2893 board_id
= (((__u32
) (subsystem_device_id
<< 16) & 0xffff0000) |
2894 subsystem_vendor_id
);
2897 printk("command = %x\n", command
);
2898 printk("irq = %x\n", pdev
->irq
);
2899 printk("board_id = %x\n", board_id
);
2900 #endif /* CCISS_DEBUG */
2902 /* If the kernel supports MSI/MSI-X we will try to enable that functionality,
2903 * else we use the IO-APIC interrupt assigned to us by system ROM.
2905 cciss_interrupt_mode(c
, pdev
, board_id
);
2908 * Memory base addr is first addr , the second points to the config
2912 c
->paddr
= pci_resource_start(pdev
, 0); /* addressing mode bits already removed */
2914 printk("address 0 = %x\n", c
->paddr
);
2915 #endif /* CCISS_DEBUG */
2916 c
->vaddr
= remap_pci_mem(c
->paddr
, 200);
2918 /* Wait for the board to become ready. (PCI hotplug needs this.)
2919 * We poll for up to 120 secs, once per 100ms. */
2920 for (i
= 0; i
< 1200; i
++) {
2921 scratchpad
= readl(c
->vaddr
+ SA5_SCRATCHPAD_OFFSET
);
2922 if (scratchpad
== CCISS_FIRMWARE_READY
)
2924 set_current_state(TASK_INTERRUPTIBLE
);
2925 schedule_timeout(HZ
/ 10); /* wait 100ms */
2927 if (scratchpad
!= CCISS_FIRMWARE_READY
) {
2928 printk(KERN_WARNING
"cciss: Board not ready. Timed out.\n");
2930 goto err_out_free_res
;
2933 /* get the address index number */
2934 cfg_base_addr
= readl(c
->vaddr
+ SA5_CTCFG_OFFSET
);
2935 cfg_base_addr
&= (__u32
) 0x0000ffff;
2937 printk("cfg base address = %x\n", cfg_base_addr
);
2938 #endif /* CCISS_DEBUG */
2939 cfg_base_addr_index
= find_PCI_BAR_index(pdev
, cfg_base_addr
);
2941 printk("cfg base address index = %x\n", cfg_base_addr_index
);
2942 #endif /* CCISS_DEBUG */
2943 if (cfg_base_addr_index
== -1) {
2944 printk(KERN_WARNING
"cciss: Cannot find cfg_base_addr_index\n");
2946 goto err_out_free_res
;
2949 cfg_offset
= readl(c
->vaddr
+ SA5_CTMEM_OFFSET
);
2951 printk("cfg offset = %x\n", cfg_offset
);
2952 #endif /* CCISS_DEBUG */
2953 c
->cfgtable
= remap_pci_mem(pci_resource_start(pdev
,
2954 cfg_base_addr_index
) +
2955 cfg_offset
, sizeof(CfgTable_struct
));
2956 c
->board_id
= board_id
;
2959 print_cfg_table(c
->cfgtable
);
2960 #endif /* CCISS_DEBUG */
2962 for (i
= 0; i
< ARRAY_SIZE(products
); i
++) {
2963 if (board_id
== products
[i
].board_id
) {
2964 c
->product_name
= products
[i
].product_name
;
2965 c
->access
= *(products
[i
].access
);
2966 c
->nr_cmds
= products
[i
].nr_cmds
;
2970 if ((readb(&c
->cfgtable
->Signature
[0]) != 'C') ||
2971 (readb(&c
->cfgtable
->Signature
[1]) != 'I') ||
2972 (readb(&c
->cfgtable
->Signature
[2]) != 'S') ||
2973 (readb(&c
->cfgtable
->Signature
[3]) != 'S')) {
2974 printk("Does not appear to be a valid CISS config table\n");
2976 goto err_out_free_res
;
2978 /* We didn't find the controller in our list. We know the
2979 * signature is valid. If it's an HP device let's try to
2980 * bind to the device and fire it up. Otherwise we bail.
2982 if (i
== ARRAY_SIZE(products
)) {
2983 if (subsystem_vendor_id
== PCI_VENDOR_ID_HP
) {
2984 c
->product_name
= products
[i
-1].product_name
;
2985 c
->access
= *(products
[i
-1].access
);
2986 c
->nr_cmds
= products
[i
-1].nr_cmds
;
2987 printk(KERN_WARNING
"cciss: This is an unknown "
2988 "Smart Array controller.\n"
2989 "cciss: Please update to the latest driver "
2990 "available from www.hp.com.\n");
2992 printk(KERN_WARNING
"cciss: Sorry, I don't know how"
2993 " to access the Smart Array controller %08lx\n"
2994 , (unsigned long)board_id
);
2996 goto err_out_free_res
;
3001 /* Need to enable prefetch in the SCSI core for 6400 in x86 */
3003 prefetch
= readl(&(c
->cfgtable
->SCSI_Prefetch
));
3005 writel(prefetch
, &(c
->cfgtable
->SCSI_Prefetch
));
3009 /* Disabling DMA prefetch for the P600
3010 * An ASIC bug may result in a prefetch beyond
3013 if(board_id
== 0x3225103C) {
3015 dma_prefetch
= readl(c
->vaddr
+ I2O_DMA1_CFG
);
3016 dma_prefetch
|= 0x8000;
3017 writel(dma_prefetch
, c
->vaddr
+ I2O_DMA1_CFG
);
3021 printk("Trying to put board into Simple mode\n");
3022 #endif /* CCISS_DEBUG */
3023 c
->max_commands
= readl(&(c
->cfgtable
->CmdsOutMax
));
3024 /* Update the field, and then ring the doorbell */
3025 writel(CFGTBL_Trans_Simple
, &(c
->cfgtable
->HostWrite
.TransportRequest
));
3026 writel(CFGTBL_ChangeReq
, c
->vaddr
+ SA5_DOORBELL
);
3028 /* under certain very rare conditions, this can take awhile.
3029 * (e.g.: hot replace a failed 144GB drive in a RAID 5 set right
3030 * as we enter this code.) */
3031 for (i
= 0; i
< MAX_CONFIG_WAIT
; i
++) {
3032 if (!(readl(c
->vaddr
+ SA5_DOORBELL
) & CFGTBL_ChangeReq
))
3034 /* delay and try again */
3035 set_current_state(TASK_INTERRUPTIBLE
);
3036 schedule_timeout(10);
3040 printk(KERN_DEBUG
"I counter got to %d %x\n", i
,
3041 readl(c
->vaddr
+ SA5_DOORBELL
));
3042 #endif /* CCISS_DEBUG */
3044 print_cfg_table(c
->cfgtable
);
3045 #endif /* CCISS_DEBUG */
3047 if (!(readl(&(c
->cfgtable
->TransportActive
)) & CFGTBL_Trans_Simple
)) {
3048 printk(KERN_WARNING
"cciss: unable to get board into"
3051 goto err_out_free_res
;
3056 pci_release_regions(pdev
);
3058 err_out_disable_pdev
:
3059 pci_disable_device(pdev
);
3064 * Gets information about the local volumes attached to the controller.
3066 static void cciss_getgeometry(int cntl_num
)
3068 ReportLunData_struct
*ld_buff
;
3069 InquiryData_struct
*inq_buff
;
3075 sector_t total_size
;
3077 ld_buff
= kzalloc(sizeof(ReportLunData_struct
), GFP_KERNEL
);
3078 if (ld_buff
== NULL
) {
3079 printk(KERN_ERR
"cciss: out of memory\n");
3082 inq_buff
= kmalloc(sizeof(InquiryData_struct
), GFP_KERNEL
);
3083 if (inq_buff
== NULL
) {
3084 printk(KERN_ERR
"cciss: out of memory\n");
3088 /* Get the firmware version */
3089 return_code
= sendcmd(CISS_INQUIRY
, cntl_num
, inq_buff
,
3090 sizeof(InquiryData_struct
), 0, 0, 0, NULL
,
3092 if (return_code
== IO_OK
) {
3093 hba
[cntl_num
]->firm_ver
[0] = inq_buff
->data_byte
[32];
3094 hba
[cntl_num
]->firm_ver
[1] = inq_buff
->data_byte
[33];
3095 hba
[cntl_num
]->firm_ver
[2] = inq_buff
->data_byte
[34];
3096 hba
[cntl_num
]->firm_ver
[3] = inq_buff
->data_byte
[35];
3097 } else { /* send command failed */
3099 printk(KERN_WARNING
"cciss: unable to determine firmware"
3100 " version of controller\n");
3102 /* Get the number of logical volumes */
3103 return_code
= sendcmd(CISS_REPORT_LOG
, cntl_num
, ld_buff
,
3104 sizeof(ReportLunData_struct
), 0, 0, 0, NULL
,
3107 if (return_code
== IO_OK
) {
3109 printk("LUN Data\n--------------------------\n");
3110 #endif /* CCISS_DEBUG */
3113 (0xff & (unsigned int)(ld_buff
->LUNListLength
[0])) << 24;
3115 (0xff & (unsigned int)(ld_buff
->LUNListLength
[1])) << 16;
3117 (0xff & (unsigned int)(ld_buff
->LUNListLength
[2])) << 8;
3118 listlength
|= 0xff & (unsigned int)(ld_buff
->LUNListLength
[3]);
3119 } else { /* reading number of logical volumes failed */
3121 printk(KERN_WARNING
"cciss: report logical volume"
3122 " command failed\n");
3125 hba
[cntl_num
]->num_luns
= listlength
/ 8; // 8 bytes pre entry
3126 if (hba
[cntl_num
]->num_luns
> CISS_MAX_LUN
) {
3128 "ciss: only %d number of logical volumes supported\n",
3130 hba
[cntl_num
]->num_luns
= CISS_MAX_LUN
;
3133 printk(KERN_DEBUG
"Length = %x %x %x %x = %d\n",
3134 ld_buff
->LUNListLength
[0], ld_buff
->LUNListLength
[1],
3135 ld_buff
->LUNListLength
[2], ld_buff
->LUNListLength
[3],
3136 hba
[cntl_num
]->num_luns
);
3137 #endif /* CCISS_DEBUG */
3139 hba
[cntl_num
]->highest_lun
= hba
[cntl_num
]->num_luns
- 1;
3140 for (i
= 0; i
< CISS_MAX_LUN
; i
++) {
3141 if (i
< hba
[cntl_num
]->num_luns
) {
3142 lunid
= (0xff & (unsigned int)(ld_buff
->LUN
[i
][3]))
3144 lunid
|= (0xff & (unsigned int)(ld_buff
->LUN
[i
][2]))
3146 lunid
|= (0xff & (unsigned int)(ld_buff
->LUN
[i
][1]))
3148 lunid
|= 0xff & (unsigned int)(ld_buff
->LUN
[i
][0]);
3150 hba
[cntl_num
]->drv
[i
].LunID
= lunid
;
3153 printk(KERN_DEBUG
"LUN[%d]: %x %x %x %x = %x\n", i
,
3154 ld_buff
->LUN
[i
][0], ld_buff
->LUN
[i
][1],
3155 ld_buff
->LUN
[i
][2], ld_buff
->LUN
[i
][3],
3156 hba
[cntl_num
]->drv
[i
].LunID
);
3157 #endif /* CCISS_DEBUG */
3159 /* testing to see if 16-byte CDBs are already being used */
3160 if(hba
[cntl_num
]->cciss_read
== CCISS_READ_16
) {
3161 cciss_read_capacity_16(cntl_num
, i
, 0,
3162 &total_size
, &block_size
);
3165 cciss_read_capacity(cntl_num
, i
, 0, &total_size
, &block_size
);
3167 /* total_size = last LBA + 1 */
3168 if(total_size
== (__u32
) 0) {
3169 cciss_read_capacity_16(cntl_num
, i
, 0,
3170 &total_size
, &block_size
);
3171 hba
[cntl_num
]->cciss_read
= CCISS_READ_16
;
3172 hba
[cntl_num
]->cciss_write
= CCISS_WRITE_16
;
3174 hba
[cntl_num
]->cciss_read
= CCISS_READ_10
;
3175 hba
[cntl_num
]->cciss_write
= CCISS_WRITE_10
;
3178 cciss_geometry_inquiry(cntl_num
, i
, 0, total_size
,
3179 block_size
, inq_buff
,
3180 &hba
[cntl_num
]->drv
[i
]);
3182 /* initialize raid_level to indicate a free space */
3183 hba
[cntl_num
]->drv
[i
].raid_level
= -1;
3190 /* Function to find the first free pointer into our hba[] array */
3191 /* Returns -1 if no free entries are left. */
3192 static int alloc_cciss_hba(void)
3194 struct gendisk
*disk
[NWD
];
3196 for (n
= 0; n
< NWD
; n
++) {
3197 disk
[n
] = alloc_disk(1 << NWD_SHIFT
);
3202 for (i
= 0; i
< MAX_CTLR
; i
++) {
3205 p
= kzalloc(sizeof(ctlr_info_t
), GFP_KERNEL
);
3208 for (n
= 0; n
< NWD
; n
++)
3209 p
->gendisk
[n
] = disk
[n
];
3214 printk(KERN_WARNING
"cciss: This driver supports a maximum"
3215 " of %d controllers.\n", MAX_CTLR
);
3218 printk(KERN_ERR
"cciss: out of memory.\n");
3225 static void free_hba(int i
)
3227 ctlr_info_t
*p
= hba
[i
];
3231 for (n
= 0; n
< NWD
; n
++)
3232 put_disk(p
->gendisk
[n
]);
3237 * This is it. Find all the controllers and register them. I really hate
3238 * stealing all these major device numbers.
3239 * returns the number of block devices registered.
3241 static int __devinit
cciss_init_one(struct pci_dev
*pdev
,
3242 const struct pci_device_id
*ent
)
3250 i
= alloc_cciss_hba();
3254 hba
[i
]->busy_initializing
= 1;
3256 if (cciss_pci_init(hba
[i
], pdev
) != 0)
3259 sprintf(hba
[i
]->devname
, "cciss%d", i
);
3261 hba
[i
]->pdev
= pdev
;
3263 /* configure PCI DMA stuff */
3264 if (!pci_set_dma_mask(pdev
, DMA_64BIT_MASK
))
3266 else if (!pci_set_dma_mask(pdev
, DMA_32BIT_MASK
))
3269 printk(KERN_ERR
"cciss: no suitable DMA available\n");
3274 * register with the major number, or get a dynamic major number
3275 * by passing 0 as argument. This is done for greater than
3276 * 8 controller support.
3278 if (i
< MAX_CTLR_ORIG
)
3279 hba
[i
]->major
= COMPAQ_CISS_MAJOR
+ i
;
3280 rc
= register_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
3281 if (rc
== -EBUSY
|| rc
== -EINVAL
) {
3283 "cciss: Unable to get major number %d for %s "
3284 "on hba %d\n", hba
[i
]->major
, hba
[i
]->devname
, i
);
3287 if (i
>= MAX_CTLR_ORIG
)
3291 /* make sure the board interrupts are off */
3292 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_OFF
);
3293 if (request_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], do_cciss_intr
,
3294 IRQF_DISABLED
| IRQF_SHARED
, hba
[i
]->devname
, hba
[i
])) {
3295 printk(KERN_ERR
"cciss: Unable to get irq %d for %s\n",
3296 hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]->devname
);
3300 printk(KERN_INFO
"%s: <0x%x> at PCI %s IRQ %d%s using DAC\n",
3301 hba
[i
]->devname
, pdev
->device
, pci_name(pdev
),
3302 hba
[i
]->intr
[SIMPLE_MODE_INT
], dac
? "" : " not");
3304 hba
[i
]->cmd_pool_bits
=
3305 kmalloc(((hba
[i
]->nr_cmds
+ BITS_PER_LONG
-
3306 1) / BITS_PER_LONG
) * sizeof(unsigned long), GFP_KERNEL
);
3307 hba
[i
]->cmd_pool
= (CommandList_struct
*)
3308 pci_alloc_consistent(hba
[i
]->pdev
,
3309 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
3310 &(hba
[i
]->cmd_pool_dhandle
));
3311 hba
[i
]->errinfo_pool
= (ErrorInfo_struct
*)
3312 pci_alloc_consistent(hba
[i
]->pdev
,
3313 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
3314 &(hba
[i
]->errinfo_pool_dhandle
));
3315 if ((hba
[i
]->cmd_pool_bits
== NULL
)
3316 || (hba
[i
]->cmd_pool
== NULL
)
3317 || (hba
[i
]->errinfo_pool
== NULL
)) {
3318 printk(KERN_ERR
"cciss: out of memory");
3321 #ifdef CONFIG_CISS_SCSI_TAPE
3322 hba
[i
]->scsi_rejects
.complete
=
3323 kmalloc(sizeof(hba
[i
]->scsi_rejects
.complete
[0]) *
3324 (hba
[i
]->nr_cmds
+ 5), GFP_KERNEL
);
3325 if (hba
[i
]->scsi_rejects
.complete
== NULL
) {
3326 printk(KERN_ERR
"cciss: out of memory");
3330 spin_lock_init(&hba
[i
]->lock
);
3332 /* Initialize the pdev driver private data.
3333 have it point to hba[i]. */
3334 pci_set_drvdata(pdev
, hba
[i
]);
3335 /* command and error info recs zeroed out before
3337 memset(hba
[i
]->cmd_pool_bits
, 0,
3338 ((hba
[i
]->nr_cmds
+ BITS_PER_LONG
-
3339 1) / BITS_PER_LONG
) * sizeof(unsigned long));
3342 printk(KERN_DEBUG
"Scanning for drives on controller cciss%d\n", i
);
3343 #endif /* CCISS_DEBUG */
3345 cciss_getgeometry(i
);
3347 cciss_scsi_setup(i
);
3349 /* Turn the interrupts on so we can service requests */
3350 hba
[i
]->access
.set_intr_mask(hba
[i
], CCISS_INTR_ON
);
3354 hba
[i
]->cciss_max_sectors
= 2048;
3356 hba
[i
]->busy_initializing
= 0;
3358 for (j
= 0; j
< NWD
; j
++) { /* mfm */
3359 drive_info_struct
*drv
= &(hba
[i
]->drv
[j
]);
3360 struct gendisk
*disk
= hba
[i
]->gendisk
[j
];
3362 q
= blk_init_queue(do_cciss_request
, &hba
[i
]->lock
);
3365 "cciss: unable to allocate queue for disk %d\n",
3371 q
->backing_dev_info
.ra_pages
= READ_AHEAD
;
3372 blk_queue_bounce_limit(q
, hba
[i
]->pdev
->dma_mask
);
3374 /* This is a hardware imposed limit. */
3375 blk_queue_max_hw_segments(q
, MAXSGENTRIES
);
3377 /* This is a limit in the driver and could be eliminated. */
3378 blk_queue_max_phys_segments(q
, MAXSGENTRIES
);
3380 blk_queue_max_sectors(q
, hba
[i
]->cciss_max_sectors
);
3382 blk_queue_softirq_done(q
, cciss_softirq_done
);
3384 q
->queuedata
= hba
[i
];
3385 sprintf(disk
->disk_name
, "cciss/c%dd%d", i
, j
);
3386 disk
->major
= hba
[i
]->major
;
3387 disk
->first_minor
= j
<< NWD_SHIFT
;
3388 disk
->fops
= &cciss_fops
;
3390 disk
->private_data
= drv
;
3391 disk
->driverfs_dev
= &pdev
->dev
;
3392 /* we must register the controller even if no disks exist */
3393 /* this is for the online array utilities */
3394 if (!drv
->heads
&& j
)
3396 blk_queue_hardsect_size(q
, drv
->block_size
);
3397 set_capacity(disk
, drv
->nr_blocks
);
3404 #ifdef CONFIG_CISS_SCSI_TAPE
3405 kfree(hba
[i
]->scsi_rejects
.complete
);
3407 kfree(hba
[i
]->cmd_pool_bits
);
3408 if (hba
[i
]->cmd_pool
)
3409 pci_free_consistent(hba
[i
]->pdev
,
3410 hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
3411 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
3412 if (hba
[i
]->errinfo_pool
)
3413 pci_free_consistent(hba
[i
]->pdev
,
3414 hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
3415 hba
[i
]->errinfo_pool
,
3416 hba
[i
]->errinfo_pool_dhandle
);
3417 free_irq(hba
[i
]->intr
[SIMPLE_MODE_INT
], hba
[i
]);
3419 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
3421 hba
[i
]->busy_initializing
= 0;
3426 static void __devexit
cciss_remove_one(struct pci_dev
*pdev
)
3428 ctlr_info_t
*tmp_ptr
;
3433 if (pci_get_drvdata(pdev
) == NULL
) {
3434 printk(KERN_ERR
"cciss: Unable to remove device \n");
3437 tmp_ptr
= pci_get_drvdata(pdev
);
3439 if (hba
[i
] == NULL
) {
3440 printk(KERN_ERR
"cciss: device appears to "
3441 "already be removed \n");
3444 /* Turn board interrupts off and send the flush cache command */
3445 /* sendcmd will turn off interrupt, and send the flush...
3446 * To write all data in the battery backed cache to disks */
3447 memset(flush_buf
, 0, 4);
3448 return_code
= sendcmd(CCISS_CACHE_FLUSH
, i
, flush_buf
, 4, 0, 0, 0, NULL
,
3450 if (return_code
!= IO_OK
) {
3451 printk(KERN_WARNING
"Error Flushing cache on controller %d\n",
3454 free_irq(hba
[i
]->intr
[2], hba
[i
]);
3456 #ifdef CONFIG_PCI_MSI
3457 if (hba
[i
]->msix_vector
)
3458 pci_disable_msix(hba
[i
]->pdev
);
3459 else if (hba
[i
]->msi_vector
)
3460 pci_disable_msi(hba
[i
]->pdev
);
3461 #endif /* CONFIG_PCI_MSI */
3463 iounmap(hba
[i
]->vaddr
);
3464 cciss_unregister_scsi(i
); /* unhook from SCSI subsystem */
3465 unregister_blkdev(hba
[i
]->major
, hba
[i
]->devname
);
3466 remove_proc_entry(hba
[i
]->devname
, proc_cciss
);
3468 /* remove it from the disk list */
3469 for (j
= 0; j
< NWD
; j
++) {
3470 struct gendisk
*disk
= hba
[i
]->gendisk
[j
];
3472 request_queue_t
*q
= disk
->queue
;
3474 if (disk
->flags
& GENHD_FL_UP
)
3477 blk_cleanup_queue(q
);
3481 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(CommandList_struct
),
3482 hba
[i
]->cmd_pool
, hba
[i
]->cmd_pool_dhandle
);
3483 pci_free_consistent(hba
[i
]->pdev
, hba
[i
]->nr_cmds
* sizeof(ErrorInfo_struct
),
3484 hba
[i
]->errinfo_pool
, hba
[i
]->errinfo_pool_dhandle
);
3485 kfree(hba
[i
]->cmd_pool_bits
);
3486 #ifdef CONFIG_CISS_SCSI_TAPE
3487 kfree(hba
[i
]->scsi_rejects
.complete
);
3489 pci_release_regions(pdev
);
3490 pci_disable_device(pdev
);
3491 pci_set_drvdata(pdev
, NULL
);
3495 static struct pci_driver cciss_pci_driver
= {
3497 .probe
= cciss_init_one
,
3498 .remove
= __devexit_p(cciss_remove_one
),
3499 .id_table
= cciss_pci_device_id
, /* id_table */
3503 * This is it. Register the PCI driver information for the cards we control
3504 * the OS will call our registered routines when it finds one of our cards.
3506 static int __init
cciss_init(void)
3508 printk(KERN_INFO DRIVER_NAME
"\n");
3510 /* Register for our PCI devices */
3511 return pci_register_driver(&cciss_pci_driver
);
3514 static void __exit
cciss_cleanup(void)
3518 pci_unregister_driver(&cciss_pci_driver
);
3519 /* double check that all controller entrys have been removed */
3520 for (i
= 0; i
< MAX_CTLR
; i
++) {
3521 if (hba
[i
] != NULL
) {
3522 printk(KERN_WARNING
"cciss: had to remove"
3523 " controller %d\n", i
);
3524 cciss_remove_one(hba
[i
]->pdev
);
3527 remove_proc_entry("cciss", proc_root_driver
);
3530 static void fail_all_cmds(unsigned long ctlr
)
3532 /* If we get here, the board is apparently dead. */
3533 ctlr_info_t
*h
= hba
[ctlr
];
3534 CommandList_struct
*c
;
3535 unsigned long flags
;
3537 printk(KERN_WARNING
"cciss%d: controller not responding.\n", h
->ctlr
);
3538 h
->alive
= 0; /* the controller apparently died... */
3540 spin_lock_irqsave(CCISS_LOCK(ctlr
), flags
);
3542 pci_disable_device(h
->pdev
); /* Make sure it is really dead. */
3544 /* move everything off the request queue onto the completed queue */
3545 while ((c
= h
->reqQ
) != NULL
) {
3546 removeQ(&(h
->reqQ
), c
);
3548 addQ(&(h
->cmpQ
), c
);
3551 /* Now, fail everything on the completed queue with a HW error */
3552 while ((c
= h
->cmpQ
) != NULL
) {
3553 removeQ(&h
->cmpQ
, c
);
3554 c
->err_info
->CommandStatus
= CMD_HARDWARE_ERR
;
3555 if (c
->cmd_type
== CMD_RWREQ
) {
3556 complete_command(h
, c
, 0);
3557 } else if (c
->cmd_type
== CMD_IOCTL_PEND
)
3558 complete(c
->waiting
);
3559 #ifdef CONFIG_CISS_SCSI_TAPE
3560 else if (c
->cmd_type
== CMD_SCSI
)
3561 complete_scsi_command(c
, 0, 0);
3564 spin_unlock_irqrestore(CCISS_LOCK(ctlr
), flags
);
3568 module_init(cciss_init
);
3569 module_exit(cciss_cleanup
);